SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4500-8
Electroreduction of CO2 to ethylene offers a promising route for renewable electricity storage, yet achieving high ethylene selectivity at industrial current densities remains challenging due to the large energy barrier for C–C coupling. Here, we report a “MOF-assisted in situ doping” strategy to introduce the oxophilic nonmetal phosphorus (P) into the copper oxide (CuO) lattice, constructing a localized Cu–P dual-site adsorption configuration for the key *OCCHO intermediate. The optimized catalyst delivers an impressive Faradaic efficiency of 64.6% for ethylene with a partial current density of 646 mA cm-2. Comprehensive structural characterizations demonstrate that P mainly occupies Cu sites, generating abundant lattice defects and oxygen vacancies. In situ synchrotron infrared spectroscopy and theoretical calculations reveal that P doping modulates the electronic structure of Cu, optimizes the binding energies of *CO and *CHO, and stabilizes *OCCHO via P–O/Cu–C dual-site adsorption, thereby significantly lowering the asymmetric C-C coupling energy barrier to 0.74 eV. This work highlights a dual-site microenvironment regulation strategy for CO2-to-ethylene electroreduction.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4286-4
Multifunctional nanoplatforms capable of efficiently regulating both emerging and classical cell death mechanisms, thereby overcoming the adaptive resistance of malignant cells to certain cell death modalities, remain a significant challenge. Herein, we propose a new concept for the self-assembly of zinc-cystine coordination networks on curcumin (Cur) drug nanocrystals (DNCs) to construct Cur@PDA@GOx/Zn-Cys (CPGZC) nanoplatforms, enabling enhanced antitumor therapy through multicomponent synergistic modulation of both newly identified disulfidptosis and classical apoptosis. At tumor site, GOx-mediated glucose depletion reduces nicotinamide adenine dinucleotide phosphate (NADPH) levels, which can impair the intracellular conversion of cystine to cysteine. Combined with the exogenous cystine delivered by CPGZC NPs, rapid intracellular disulfide accumulation strongly activates disulfidptosis. Simultaneously, the reduction in NADPH levels inhibits GSH biosynthesis, augmenting the intracellular ROS levels elicited by Cur DNCs within the CPGZC nanoplatforms. Moreover, the elevated oxidative stress, in synergy with the excessive Zn2+ introduced, aggravates mitochondrial damage, thereby further amplifying apoptosis. Consequently, the synergistic modulation of disulfidptosis and apoptosis induces a potent antitumor response, as validated by comprehensive in vitro and in vivo investigations. This study opens new avenues for the development of multifunctional nanoplatforms for enhanced cancer therapy through the effective integration of both emerging and classical cell death mechanisms, which may serve as a promising strategy to advance our comprehension of synergistic utilization of various cell death mechanisms and combat with complex cancers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4384-9
Nanovesicle-hybridized hydrogels constitute a class of bioactive materials that integrate the structural stability of polymer networks with the intrinsic biological functions of nanoscale vesicles. Conventional hydrogels suffer from swelling-induced mechanical degradation, uncontrollable cargo release, and an inability to integrate multiple bioactivities. Hybridization with nanovesicles provides a robust solution to these limitations. This review systematically delineates the evolution of construction strategies, transitioning from simple physical entrapment to advanced chemical crosslinking involving noncovalent supramolecular interactions and covalent conjugation. We elucidate how these integration methods fundamentally enhance mechanical strength, enable spatiotemporally controlled release of vesicles and their cargos, and endow composite systems with multifaceted bioactivities. The diverse biomedical applications of these hybridized platforms in drug delivery, tissue engineering, and disease therapy are thoroughly discussed. Current technical hurdles in clinical translation and promising future directions are identified, providing a roadmap for the next generation of intelligent biomimetic materials. The review emphasizes that the shift from physical doping to chemical crosslinking represents a paradigm change, yielding composites with superior mechanical resilience and programmable release kinetics. By critically assessing the trade-offs between crosslinking density, vesicle integrity, and payload retention, this work offers a framework for designing hybrid systems with tailored properties. Key challenges include scalable manufacturing, long-term stability, and regulatory hurdles. The analysis underscores that clinical translation demands standardized protocols for vesicle isolation, crosslinking efficiency, and sterility assurance. This review serves as a benchmark for researchers and engineers aiming to bridge the gap between laboratory-scale fabrication and industrial production of nanovesicle-hybridized hydrogels.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4467-x
Conventional eye-movement interaction systems depend on video capture, infrared tracking, and image recognition, which impose inherent constraints on accuracy, response latency, and stability. This study introduces an eyelash-guided signal interaction system based on a triboelectric nanogenerator (PF-TENG) using PDMS-FDTS thin films. The system employs eyelash movements as interactive inputs, eliminating the need for complex optical acquisition devices. A CNN-LSTM hybrid neural network classifies distinct eyelash movement patterns with a classification accuracy exceeding 98.5%. The PF-TENG device exhibits ultra-flexibility and transparency, enabling seamless integration onto eyeglasses without obstructing the user's field of view. Experimental validation demonstrates real-time monitoring of ocular states for driving fatigue detection, accurately identifying fatigue signs and enhancing application potential in intelligent driving. The system offers a natural, comfortable input modality and significant advantages for human-machine interaction, with broad prospects in eye-movement control and intelligent transportation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4343-7
Piezoelectric materials interconvert mechanical and electrical energy, but piezoceramics are brittle while PVDF-based ferroelectric polymers exhibit low piezoelectric coefficients (d33 ≈ -30 pC N-1). Chemical modification via morphotropic phase boundary (MPB) engineering has raised d33 in P(VDF-TrFE) to -63.5 pC N-1, and to -69 pC N-1 with stretching, but intrinsic piezoelectricity in relaxor terpolymers remains limited. Here, relaxor ferroelectric P(VDF-TrFE-CFE) with varying C=C double bond (DB) content is synthesized via dehydrochlorination. Structural and electrical characterization reveals that increasing DB content stabilizes long-range ferroelectric order while suppressing short-range relaxor characteristics, forming a trans/helix phase boundary. At a critical DB content of 2.0 mol%, a markedly enhanced intrinsic d33 of -129.0 pC N-1 is achieved, outperforming previous MPB approaches. This finding addresses the fundamental bottleneck of low piezoelectric response in flexible ferroelectric polymers and provides a viable route for high-performance wearable electromechanical devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4499-9
Two-dimensional (2D) ferroelectric materials have emerged as promising candidates for next-generation non-volatile memory and neuromorphic computing, yet their integration into commercial devices faces substantial hurdles. This review critically examines the structure, properties, and applications of ferroelectric 2D In-Se materials, with a focus on their potential to overcome the scaling and retention limitations of conventional ferroelectrics such as Hf0.5Zr0.5O2 (HZO). The manuscript synthesizes recent advances in In-Se ferroelectricity, including the mechanisms of polarization switching, modulation strategies, and device demonstrations. Key experimental benchmarks from the literature are analyzed, such as the high data retention and read endurance of 5-nm HZO ferroelectric FETs (IEEE Electron Device Lett, 2019, 40(3): 399-402) and the giant barrier height modulation in ferroelectric van der Waals heterojunctions (Nat Electron, 2020, 3: 466-472). The review also highlights the performance of sliding ferroelectric memories based on rhombohedral-stacked bilayer MoS2, which achieved non-volatile storage with low power consumption (Nat Commun, 2024, 15: 10796). Despite these advances, critical challenges remain: the scalability of In-Se synthesis, the control of domain dynamics at the nanoscale, and the cost parity with silicon-based technologies. By consolidating empirical data and identifying unresolved bottlenecks, this review provides a roadmap for researchers and engineers aiming to translate 2D ferroelectric In-Se from laboratory curiosities to manufacturable devices. The analysis underscores the need for standardized metrology and accelerated lifetime testing to validate industrial viability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4452-8
Europium(III) complexes offer intrinsically narrow red emission (full-width at half-maximum < 5 nm) that is highly desirable for ultrahigh-definition displays, yet their electroluminescence performance is severely limited by unbalanced charge transport and inefficient energy transfer. This work reports a molecular design strategy that modulates both energy transfer and charge transport in Eu³⁺ OLEDs. The synthesized complex, Cz-Eu, incorporates a carbazole-functionalized ancillary ligand to facilitate host–guest energy transfer and hole transport. The single-crystal structure was deposited (CIF: Cz-Eu-cif.cif) and subjected to PLATON validation, which flagged 3 type-1 alerts (CIF construction/syntax errors), 8 type-2 alerts (possible structural model deficiencies), 12 type-3 alerts (low structure quality), and 4 type-4 alerts (improvement suggestions), with no duplication detected. These crystallographic alerts indicate that the reported structure requires further refinement before it can be considered reliable. Nevertheless, the device metrics demonstrate a promising route: the optimized OLED achieves efficient ultranarrow-band red emission, with the potential for high color purity and reduced power consumption. The findings underscore the critical role of ligand engineering in balancing charge fluxes and fostering efficient energy transfer, providing a viable pathway for next-generation red emitters. However, the structural ambiguities highlighted by the PLATON analysis warrant cautious interpretation of the structure–property relationships and suggest that additional crystallographic and device stability studies are necessary to substantiate the claimed performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4358-y
Oxygen electrocatalysis underpins the viability of proton-exchange-membrane water electrolyzers and rechargeable Zn–air batteries, yet commercial deployment remains constrained by the sluggish kinetics of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which impose overpotentials exceeding 300 mV and accelerate catalyst degradation. This review, submitted to SCIENCE CHINA Materials (Manuscript ID SCMs-2026-1384.R1), synthesizes recent advances in rational catalyst design guided by the direct observation and theoretical treatment of reaction intermediates. The authors compile evidence from in situ characterization and computational modeling to establish that intermediate binding energies—particularly *OOH, *O, and *OH on Ru, Ir, Co, and Fe–N–C active sites—serve as predictive descriptors for activity and stability. Cited works demonstrate that 4f-modified Ru–O polarity, spin-balanced Janus Ir–Co magnetic atoms, and aligned d-orbital energy levels in dual-atom sites can shift rate-determining steps and lower activation barriers. The review further examines interfacial microenvironment engineering via anion adsorption, ligand functionalization, and S,N co-doped carbon confinement, which modulate local pH, water orientation, and mass transport. Emphasis is placed on dual-site mechanisms, including FeN6–CoN4 and Co-substituted Ni coordination polymers, where synergistic strong–weak adsorption coupling alters ORR pathways from adsorbate evolution to dissociation. The manuscript provides a critical assessment of descriptor reliability, noting that intermediate binding alone cannot capture dynamic reconstruction, electrolyte effects, or long-term operational stability. By integrating in situ spectroscopy with descriptor-based design, the review offers a framework for translating mechanistic insight into durable, cost-effective oxygen electrocatalysts for industrial electrolysis and metal–air batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4383-8
Conventional cancer therapies remain constrained by undruggable oncogenic proteins and acquired resistance. Proteolysis targeting chimeras (PROTACs) have emerged as a transformative modality that harnesses the ubiquitin-proteasome system to selectively degrade target proteins, offering advantages over traditional small-molecule inhibitors. However, clinical translation of PROTACs is impeded by intrinsic physicochemical limitations: high molecular weight, poor bioavailability, and lack of tumor-specific delivery. Integrating PROTACs with nanotechnology has yielded advanced nano-PROTACs platforms. Nanocarriers enhance solubility and stability, optimize pharmacokinetics, and enable spatiotemporally controlled drug release through passive or active targeting. This review systematically summarizes recent advances in engineering multifunctional nano-PROTACs for cancer therapy, with particular emphasis on design strategies by which nanoengineering enhances PROTAC performance. We evaluate how these platforms improve anticancer efficacy and minimize systemic toxicity while exploring their therapeutic potential in monotherapy and synergistic treatment settings. Finally, we discuss current challenges and future perspectives, providing a theoretical and technical foundation for next-generation nano-PROTACs as a precise and potent strategy in precision oncology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4412-y
GeTe-based thermoelectric materials are promising lead-free alternatives to PbTe, but their intrinsically high Ge vacancy concentration (~10^21 cm^-3) leads to excessive carrier density and degraded Seebeck coefficient. This study integrates resonant levels (RLs) via In doping and local van der Waals gaps via Sb/Bi alloying to decouple electron and phonon transport. The optimal composition Ge0.91Sb0.04Bi0.04In0.01Te exhibits a Seebeck coefficient of ~287.31 μV K^-1 at 323 K, more than double that of the In-free sample (~102.28 μV K^-1). The peak figure of merit zT reaches ~1.8 at 723 K, with an average zT of ~1.0 over 323–723 K. Vickers hardness is enhanced to ~224 HV, a ~93% improvement over pristine GeTe (~116 HV). X-ray diffraction reveals a structural evolution toward a pseudo-cubic phase with increasing In content, and the (202) peak shifts to lower angles, indicating lattice expansion. These results demonstrate that synergistic RLs and van der Waals gaps effectively optimize carrier concentration and suppress thermal conductivity, offering a viable route for high-performance, mechanically robust GeTe thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4498-7
Two-dimensional porphyrin-based hypercrosslinked polymers (TPP-HCPs) were synthesized via room-temperature interfacial polymerization using 5,10,15,20-tetraphenylporphyrin and 1,3,5-trioxane. The resulting TPP-HCPs exhibited a BET surface area of 548 m2 g-1 and a CO2 uptake of 7.97 wt% at 1 bar and 298 K. CuO/TPP-HCPs nanospheres were fabricated by thermal conversion of Cu(NO3)2·3H2O in DMF at 135 °C, using TPP-HCPs as dynamic templates. This in-situ strategy generated CuO nanoparticles within the conjugated porous matrix, facilitating electron transfer and enhancing CO2 access to catalytic centers. In CO2 electroreduction, the composite achieved a total gas Faradaic efficiency exceeding 90% at ~500 mA cm-2 (-1.4 V vs. RHE), with 40.9% for C2H4, 8.2% for CH4, 31.9% for CO, and 12.3% for H2. The catalyst maintained stability over 24 h in an H-cell. These results demonstrate that 2D conjugated polymer-templated catalysts can sustain high-rate CO2 conversion to value-added products, offering a viable route for industrial CO2 utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4405-9
Conventional metal-halide X-ray scintillators, including Bi4Ge3O12 (BGO), Cs(Na)I:Tl, and Lu1.8Y0.2SiO5:Ce (LYSO), suffer from hygroscopic decomposition, high-temperature fabrication, and mechanical rigidity, which restrict their deployment in harsh-environment radiography. This study reports a nontoxic zero-dimensional organic–inorganic hybrid copper(I) halide, Cu2I2(C26H36NP)2 (Compound G), synthesized via a room-temperature solution route. The bulky phosphine ligands confer exceptional superhydrophobicity, with the material retaining 91.95% of its initial luminescence after 30 days of water immersion. A flexible scintillator screen fabricated from styrene-ethylene-butene-styrene (SEBS) exhibits a light yield of ~32,500 photons MeV-1, a spatial resolution of 19.14 lp mm-1, and a detection limit of 0.8 μGyair s-1. The screen enables stable X-ray imaging under flexible, high-temperature, and underwater conditions, eliminating vignetting and distortion in nonplanar objects. These metrics demonstrate that the superhydrophobic copper(I) halide scintillator addresses the water-stability bottleneck of commercial scintillators while delivering competitive light output and resolution, offering a viable pathway for medical diagnosis, nondestructive inspection, security checking, and space exploration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4432-9
Sodium vanadium phosphate (Na3V2(PO4)3, NVP) with NASICON structure is a promising cathode for sodium-ion batteries but suffers from low electronic conductivity and a high energy barrier for the V4+/V5+ redox couple, limiting practical energy density. A medium-entropy tuning strategy yields the multi-element substituted Na3.2V1.5Cr0.1Fe0.1Mn0.1Ni0.1Ti0.1(PO4)3 (ME-NVP). Entropy modulation tailors the microscopic electronic structure, enabling reversible V4+/V5+ redox at 4.0 V. Analyses reveal a synergistic diffusion mechanism that accelerates Na+ transport and enhances multiple-electron redox kinetics. Ex-situ X-ray diffraction confirms highly reversible structural evolution during cycling. The ME-NVP cathode delivers 116.8 mAh g-1 at 0.1C and retains 83.9% of initial capacity after 1000 cycles at 20C, with excellent performance from -12 to 50 °C. This work demonstrates that configurational entropy regulation unlocks high-energy polyanion cathodes for advanced sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4476-1
Self-sustained oscillation in soft actuators enables autonomous, untethered robotic locomotion, yet existing light-driven systems suffer from low oscillation frequencies, rapid photothermal degradation, and reliance on external controllers. This work presents a bat-inspired soft robot that converts continuous near-infrared (NIR) irradiation into sustained rotational motion via a coiled MXene-based liquid crystal elastomer (LCE) actuator. The actuator integrates Ti3C2Tx MXene nanosheets as photothermal converters within an LCE matrix, achieving a photothermal conversion efficiency of 78.3% and a steady-state temperature of 142 °C under 1.5 W cm−2 NIR (808 nm). The coil geometry induces a self-shadowing effect that generates periodic light exposure, producing autonomous oscillation at 2.7 Hz with an amplitude of 45°. The robot demonstrates a rotational speed of 120 rpm and a specific power density of 3.2 W kg−1, outperforming previously reported light-driven oscillators by a factor of 2.5. Under continuous operation for 10,000 cycles, the actuator retains 92% of its initial oscillation amplitude, with a degradation rate of 0.008% per cycle. The bat-inspired wing morphology enables directional rotation and obstacle avoidance in confined spaces. This platform eliminates the need for external modulation, offering a scalable route to autonomous soft robotics for inspection, environmental monitoring, and micro-manipulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4391-5
Self-assembled monolayers (SAMs) enable precise tuning of the ITO/active layer interfacial dipole, yet their impact on the crystallization kinetics of the overlying active layer remains poorly understood, limiting their potential in high-efficiency organic solar cells. This study introduces THPC, a self-assembling material with an extended carbazole core and heteroatom substitution, as a hole transport layer (HTL). Unlike the hydrophilic PEDOT:PSS, THPC exhibits low surface energy, providing a favorable template that extends the film formation kinetics of the PM6:L8-BO-X blend by nearly 1.4 times, mitigating the explosive nucleation prevalent in PM6-based active layers. This promotes a highly ordered fibrous morphology and enhances vertical phase separation. The deep work function of THPC (5.32 eV) increases the built-in potential, reduces interfacial trap density, and facilitates charge extraction. Consequently, non-radiative recombination loss decreases from 0.243 eV to 0.227 eV, and the open-circuit voltage rises from 0.866 V to 0.883 V, yielding a power conversion efficiency (PCE) of 20.19%, outperforming the PEDOT:PSS control (18.67%). This finding is confirmed across multiple Y-series acceptors, all approaching 20% PCE. Notably, the D18:L8-BO system achieves a PCE of 20.55%, demonstrating broad applicability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4351-8
Breaking intrinsic structural symmetry is a fundamental prerequisite for pronounced nonlinear optical responses. Low-symmetry semiconductors with inherent anisotropy enable self-powered optoelectronic conversion and polarization-sensitive functionalities. This work reports the synthesis of low-dimensional van der Waals chain TeSe2 crystals with intrinsic inversion and C3 symmetry breaking. Angle-resolved polarized Raman spectroscopy and second-harmonic generation measurements confirm crystalline anisotropy and nonlinear optical performance. Electrical transport studies reveal p-type conduction with a room-temperature field-effect mobility of 122 cm2 V-1 s-1. The TeSe2 photodetector achieves self-powered detection and linearly polarized light detection across 405–1064 nm, with a photoresponsivity of 77.3 mA/W at 532 nm. The linear photogalvanic effect response is effectively modulated by gate voltage. Density functional theory calculations attribute p-type doping to Te and Se vacancies, while the nonlinear optical origin is linked to strong Berry curvature. Applications in polarization encoding communication and polarization imaging are demonstrated, indicating potential for low-energy-consuming, highly sensitive, on-chip integrated linear polarized photodetectors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4420-7
Cu2-xSe is a leading p-type thermoelectric material owing to its phonon-liquid electron-crystal (PLEC) behavior, yet the atomic-scale mechanisms governing Cu+ migration remain unresolved. This study employs in situ high-resolution neutron diffraction coupled with maximum entropy method (MEM) analysis to map the temperature-dependent evolution of Cu+ nuclear density in β-Cu2Se and β-Cu1.95Se. At 398–423 K, intra-tetrahedral Cu 8c ↔ 32f <111> hopping emerges, with isosurface values of 0.505 fm Å-3 for β-Cu2Se and 0.484 fm Å-3 for β-Cu1.95Se. Above 448 K, inter-tetrahedral pathways form via Cu 32f ↔ 32f <100> or 32f ↔ 4b ↔ 32f <111> migration, as revealed by line scans along [1̅11̅] up to 723 K. The presence of Cu vacancies (x = 0.05) alters the onset and connectivity of these pathways, directly impacting phonon scattering and electron transport. These findings establish a structural basis for controlling Cu+ mobility, offering a rational route to mitigate Cu precipitation and enhance zT stability beyond 1.5 at 900 K. The work bridges microstructural dynamics and thermoelectric performance, providing critical guidance for defect engineering in superionic thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4494-9
Superionic conductors exhibit high cation mobility arising from weak binding and continuous transport pathways, atomistically characterized by extensive structural disorder and partial occupancy akin to amorphization. This disorder, whether confined to a cation sublattice or extended to full amorphization, strongly impedes lattice thermal transport, rendering these materials intrinsically ideal thermal insulators. This work investigates Ag26I18W4O16, a superionic conductor tunable from fully amorphous to single-crystalline states, as a model system to probe the impact of disorder and amorphization on thermal transport. Extensive Ag+ disorder, in both crystalline and amorphous phases, reduces thermal conductivity to approximately the theoretical lower bound of 0.16 W/m-K with virtually no temperature dependence, while concurrently achieving the lowest mean sound velocity ever recorded for a dense solid. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data indicates that short-range disorder (< 5 Å), rather than long-range periodicity, governs thermal insulation performance in both phases. These findings suggest a design strategy reconciling structural stability with glass-like thermal insulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4466-3
Conventional surface coating technologies for 45 steel are constrained by high processing temperatures, limited material compatibility, and insufficient interfacial bonding. This study introduces ultrasonic vibration-assisted mechanical coating (UVAMC) as a low-temperature deposition route that mitigates these limitations. The process yields a chromium coating on 45 steel with a nanoscale elemental interdiffusion transition layer at the interface, achieving a bonding strength of 66.0 MPa. The coating delivers improved corrosion resistance in aggressive environments while preserving the substrate's original compressive and tensile strength. The method also demonstrates broad process adaptability, successfully depositing copper, aluminum, and 316 stainless steel powders, and forming complex shapes such as the "SZU" pattern. These results establish UVAMC as a viable surface functionalization strategy for metallic materials, combining efficient deposition with operational flexibility.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4447-3
Chargeable photoconductivity, a non-volatile photoresponse phenomenon, was investigated in multiferroic heterostructures comprising Bi0.85La0.15FeO3 (BLFO) and a quasi-two-dimensional electron gas (Q2DEG). Two device architectures, LSMO/BLFO/Q2DEG and Pt/BLFO/Q2DEG, were fabricated and characterized under varying electrical connection conditions between the top electrode and the Q2DEG during illumination and dark waiting stages. Current-voltage (I-V) measurements reveal that the heterostructures exhibit persistent photoconductivity after illumination, with the magnitude and retention dependent on the circuit configuration. Under open/open conditions, the photocurrent increases with illumination duration, and subsequent dark waiting leads to a gradual decay, indicating charge storage and release mechanisms. The LSMO/BLFO/Q2DEG heterostructure demonstrates superior chargeable photoconductivity compared to the Pt counterpart, attributed to the oxygen vacancy migration and interfacial polarization effects. These findings establish a foundation for oxide-based photoelectric memory devices with potential for low-power, non-volatile optoelectronic applications. The results provide critical insights into the interplay between ferroelectric polarization, oxygen vacancy dynamics, and charge trapping at the BLFO/Q2DEG interface, offering a pathway for designing advanced multiferroic optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4311-y
Chronic infections caused by biofilms of drug-resistant bacteria pose a significant challenge in clinical treatment. Traditional NIR-I photothermal therapy has limitations, including restricted tissue penetration and potential damage to normal tissues due to high temperatures. While NIR-II light offers deeper penetration, there remains a scarcity of materials capable of simultaneously responding to both NIR-I and NIR-II wavelengths and integrating multiple sterilization mechanisms under mild conditions. In this study, a Fe-based high-entropy spinel oxide (HEOs) was designed and synthesized. Benefiting from lattice distortion induced by the high-entropy effect and the hybridization of multiple metal d-orbitals, the material achieves cooperative optimization of its electronic band structure. Consequently, it exhibits efficient broad-spectrum photothermal properties across both NIR-I and NIR-II regions alongside excellent peroxidase-like (POD) activity. Under dual-wavelength laser irradiation, the material enables mild yet efficient photothermal conversion (<50 °C) while simultaneously catalyzing hydrogen peroxide (H2O2) to generate abundant hydroxyl radicals (·OH), thereby constructing a synergistic antibacterial system combining dual-window photothermal therapy and enzymatic catalysis. In vitro experiments confirmed that the HEOs possesses potent bactericidal and biofilm eradication capabilities against both Gram-positive and Gram-negative bacteria. In a mouse model of drug-resistant bacterial wound infection, the material, assisted by either NIR-I or NIR-II laser irradiation, effectively cleared the infection, reduced inflammation, and promoted collagen deposition and angiogenesis, thereby significantly accelerating wound healing. This work not only provides a novel strategy for developing dual-window-responsive antibacterial materials for deep-tissue infections but also deepens the understanding of the structure-activity relationship in high-entropy materials at the electronic structure level.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4404-7
Electrochemical propylene epoxidation offers a sustainable route to propylene oxide (PO), but achieving high selectivity and stability under industrial current densities remains challenging. Herein, we report a high entropy amorphous CoFeNiCrMnBOx borate loaded with high valence Pt single atoms catalyst (a-Pt-HEBO) for stable bromine radical-mediated propylene epoxidation reaction (BrPOR). The high-entropy amorphous structure reshapes the interfacial hydrogen-bonding network and enriches free water, substantially lowering the energy barrier for water dissociation. Meanwhile, the strong electronic interactions between the coordinatively unsaturated, high-valence single Pt atoms and the substrate effectively prevent transition metal dissolution at high anodic potentials. The catalyst achieved 82.1% Faraday efficiency of PO at an industrial grade current density of 100 mA cm-2, and demonstrated excellent industrial application stability in up to 500 h of continuous test and within a scaled-up electrolyzer (4 × 4 cm2). This work provides a design for high-entropy catalysts in halogen-mediated electrosynthesis and a viable pathway toward carbon-neutral PO production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4313-7
Liquid-to-vapor mass transfer is central to energy and environmental processes. Conventional distillation relies on vapor-liquid equilibrium and device-level optimization, with materials playing passive structural roles. Non-boiling processes such as membrane distillation and interfacial solar evaporation localize phase change at confined interfaces, making mass transfer a materials-mediated transport phenomenon where interfacial structure and chemistry dictate evaporation kinetics, vapor escape, and solute rejection. Janus interface materials, featuring spatially separated hydrophilic and hydrophobic domains, introduce architectural asymmetry to regulate liquid-to-vapor mass transfer. This review summarizes recent advances, highlighting mechanisms including the cooperative pump-valve effect, nanoconfinement-enhanced transport, and mitigation of fouling and scaling. Representative applications in membrane distillation, solar-driven evaporation, and personal thermal-moisture management are systematically discussed. Key challenges and future opportunities are outlined, particularly in advancing fundamental understanding, scalable fabrication, and practical implementation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4324-4
Magnesium-oxygen (Mg-O2) batteries offer high theoretical energy density and low-cost earth-abundant magnesium, yet practical deployment has been impeded by poor cycling stability and low energy efficiency, primarily due to the sluggish decomposition of conventional MgOx discharge products. Here we demonstrate that trace water in the electrolyte redirects the cathodic reaction to form chemically reactive Mg2(OH)3Cl·4H2O as the main discharge product, enabling a new reversible pathway: 8Mg2+ + 4Cl- + 3O2 + 22H2O ⇋ 4Mg2(OH)3Cl·4H2O. This water-mediated chemistry significantly enhances redox reversibility compared with the MgOx route. The resulting Mg-O2 battery delivers over 324 stable cycles at 1000 mA·g-1 with a capacity of 500 mAh·g-1 and an energy efficiency of 92%, surpassing all previously reported Mg-O2 systems. The electrolyte comprises 0.25 M magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and 0.5 M magnesium chloride (MgCl2) in ethylene glycol dimethyl ether (DME) with a trace amount of water. These findings establish a general strategy for reversible Mg-O2 electrochemistry and provide a new design paradigm for practical magnesium-based energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4263-3
Monolayer black phosphorus (phosphorene) exhibits a direct bandgap and strong in-plane anisotropy, making it a promising candidate for near-infrared (NIR) optoelectronic devices. However, the precise modulation of its excitonic emission via anisotropic strain remains insufficiently understood, particularly regarding the contrasting strain responses of phosphorene versus transition metal dichalcogenides (TMDs). Here, we combine experimental characterization with tight-binding (TB) modeling to elucidate the strain-dependent bandgap evolution in phosphorene. Using a four-band TB model, we derive the bandgap at the Γ point as E_g^BP = 4t1 + 2t2 + 4t3 + 2t5, with hopping parameters t1 = -1.220 eV, t2 = 3.665 eV, t3 = -0.205 eV, t4 = -0.105 eV, and t5 = -0.055 eV. Under tensile strain along the zigzag (ZZ) direction, the interatomic distance associated with t1 increases, reducing the magnitude of |t1|. Since t1 is negative, the bandgap increases, contrary to the behavior of monolayer MoS2, where tensile strain decreases the bandgap due to positive hopping parameters t11, t22, and t12. This anisotropic strain response enables selective tuning of NIR exciton emission. Our findings provide a quantitative framework for strain engineering in phosphorene-based NIR devices, highlighting the critical role of hopping parameter signs in determining bandgap modulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4177-3
Chirality profoundly influences tumor therapy by regulating key physiological processes, yet the link between chirality and therapeutic properties of atomically precise metal nanoclusters (NCs) remains poorly understood. Atomically precise Au25 NCs protected by chiral cysteine ligands (L-Au25(cys)18, D-Au25(cys)18, and Rac-Au25(cys)18) were constructed and systematically investigated to elucidate the association between chirality and tumor therapeutic performance. Although no significant difference in enzyme-like activity was observed among the three NCs, Rac-Au25(cys)18 exhibited enhanced reactive oxygen species generation under 808 nm laser irradiation, achieving superior phototherapeutic effects in both in vitro and in vivo tumor models. The chiral Au25 NCs induced distinct cell death pathways: L-Au25(cys)18 primarily triggered ferroptosis, D-Au25(cys)18 induced both ferroptosis and apoptosis, and all three NCs activated disulfidptosis. In vivo, tumor inhibition rates for L-Au25, D-Au25, and Rac-Au25 groups were 46.7%, 42.5%, and 68.3%, respectively, with no significant body weight fluctuations and minimal hepatorenal toxicity. Hematological and histopathological analyses confirmed favorable systemic biocompatibility. This work clarifies the correlation between chiral structures and tumor therapeutic performance of gold NCs, providing experimental insights and theoretical support for the design of novel chiral nanomaterials and optimization of precise tumor phototherapeutic strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4491-3
Magnetic tunnel junctions (MTJs) with multiferroic tunneling barriers offer a pathway to fully electrically controlled multi-state memory, addressing the high energy costs and scalability limits of magnetically controlled counterparts. In this work, we propose a theoretical design achieving four or ten distinct resistance states via electrical control, with a giant tunneling magnetoresistance (TMR) ratio of 1.1×10^4% (11000%). This value surpasses all previously reported MTJs, including experimental systems such as CoFeB/MgO/CoFeB (TMR 65%, 4 states) and theoretical systems like Ga2O3/MgO/Ga2O3 (TMR 1120%, 2 states). The multiferroic barrier enables simultaneous control of ferroelectric and magnetic order parameters, allowing reversible switching between multiple resistance levels without external magnetic fields. Our first-principles calculations reveal that the high TMR arises from spin-dependent tunneling through the barrier, modulated by the ferroelectric polarization direction and magnetization configuration. The device operates with low write energy and exhibits non-volatile retention, making it suitable for high-density storage and in-memory computing. This work establishes a new benchmark for electrically controlled MTJs and provides a practical route to overcome the limitations of current spintronic memory technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4495-3
Room-temperature phosphorescence (RTP) has attracted substantial interest for applications in smart optoelectronics, yet the development of dynamic RTP systems remains intrinsically challenging. Here, we report an appropriately rigid confinement strategy based on NaCl ionic crystals formed in situ via cation-anion exchange, which simultaneously suppresses non-radiative decay and retains sufficient structural flexibility for external stimulation. In the TPN/NaCl and DPB/NaCl systems, dynamic phosphorescence is realized exclusively upon sequential thermal activation and ultraviolet irradiation. Mechanistic investigations reveal that residual water and triplet oxygen initially quench triplet excitons, and their gradual removal enables a competitive evolution between triplet-triplet annihilation (TTA) and phosphorescence pathways. This work establishes a general design principle for constructing stimulus-responsive dynamic RTP systems and resolves the long-standing conflict between rigidity and responsiveness in organic phosphorescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4272-3
Ruthenium (Ru)-based alloys are promising alternatives to commercial Pt/C catalysts for the hydrogen evolution reaction (HER) owing to their low cost and favorable hydrogen adsorption properties. However, the sluggish water dissociation on Ru catalysts remains a major kinetic bottleneck in alkaline solutions. Herein, we report a rare earth (RE) dilute alloy strategy by incorporating a trace amount of cerium (Ce, ~1 at%) into a RuCu alloy to promote interfacial water activation. The oxophilic Ce sites strengthen H2O adsorption and reduce the energy barrier for water dissociation, thereby accelerating the Volmer step during alkaline hydrogen evolution. Consequently, the RuCuCe catalyst delivers 10 mA cm−2 at an overpotential of only 18 mV in 1.0 M KOH and maintains stable operation for over 100 h at 500 mA cm−2 in a membrane electrode assembly. In situ electrochemical impedance spectroscopy and pH-dependent measurements verify the facilitated Volmer process induced by Ce incorporation. Temperature-dependent analysis further shows that the apparent activation energy decreases from 47.4 kJ mol−1 for RuCu to 26.4 kJ mol−1 for RuCuCe, consistent with enhanced water dissociation kinetics. This work establishes RE dilute metal alloys as an effective platform for boosting the intrinsic activity of Ru-based alloy catalysts, in which RE incorporation promotes water dissociation while inducing charge redistribution in the alloy matrix.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4294-4
Room-temperature phosphorescence (RTP) polymer materials are attractive for flexible electronics and information encryption due to their tunability and processability. However, achieving polymeric RTP systems that simultaneously exhibit high thermal sensitivity, reversible multicolor emission, and long phosphorescence lifetime (τPhos) with high quantum yield (ΦPhos) remains challenging. Here, we report an in-situ cross-linked self-assembly strategy that converts flexible polymers into rigid polymer microspheres, yielding long τPhos, high ΦPhos, and thermally and time-dependent tunable RTP. The resulting microspheres (PM0.1-0.01-1) exhibit a maximum τPhos of 1754 ms and ΦPhos of 42.83%, markedly superior to previously reported intrinsic polymer RTP materials. At 77 K, they display ultralong green emission with a lifetime of 6019 ms and visible afterglow lasting up to 99 s. The cross-linked microspheres enable time-dependent, continuously tunable RTP and thermally responsive color switching, while maintaining excellent phosphorescence stability in aqueous and high-temperature environments. This provides a versatile platform for dynamic information encryption, full-color afterglow LEDs, and temperature sensing. The strategy establishes a general design principle for developing multidimensional, controllable, and stable high-performance polymer RTP materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4502-1
Near-infrared-II (NIR-II, 1000-1700 nm) luminescent materials are pivotal for deep-tissue bioimaging and optical communication, yet their performance is often limited by low quantum yields and thermal quenching. Here, we report a thermal-enhanced NIR-II luminescence in Sb3+/Er3+ co-doped Cs3GdCl6 microcrystals synthesized via a modified Bridgman method. Under ultraviolet excitation, the co-doped microcrystals exhibit intense NIR-II emission centered at 1532 nm corresponding to Er3+: 4I13/2 → 4I15/2 transition, with a maximum relative sensitivity of 1.2% K−1 at 303 K. Notably, the integrated NIR-II emission intensity increases by 2.3-fold from 298 K to 373 K, demonstrating anomalous thermal enhancement. This behavior is attributed to the thermally activated energy transfer from Sb3+ sensitizers to Er3+ activators, as confirmed by temperature-dependent photoluminescence spectra and decay kinetics. The energy transfer efficiency reaches 86% at room temperature and further improves with rising temperature. The microcrystals also show excellent photostability, retaining 95% of initial intensity after 120 min continuous UV irradiation. Furthermore, we demonstrate a proof-of-concept wireless optical communication link using the microcrystals as a NIR-II phosphor, achieving a signal-to-noise ratio of 30 dB at 400 Hz modulation frequency. These findings provide a new strategy for designing thermal-enhanced NIR-II luminescent materials and expand their potential in temperature sensing and optical communication.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4299-9
A dual-doping strategy incorporating boron (B) and sulfur (S) into graphitic carbon nitride (g-C3N4) was employed to engineer band structures and construct an S-scheme homojunction (BSCN) for enhanced photocatalytic hydrogen (H2) evolution. The BSCN catalyst exhibited an interwoven architecture of porous nanotubes and nanosheets, providing a large specific surface area and abundant active sites. In situ X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations revealed an S-scheme charge transfer mechanism at the BCN/SCN interface, driven by a built-in electric field that facilitates efficient spatial separation of photogenerated charge carriers. Photoelectrochemical measurements confirmed improved light harvesting and charge separation. DFT simulations indicated near-thermoneutral hydrogen adsorption free energy (ΔGH* = 0.12 eV) at S-doped sites, favorable for hydrogen evolution reaction (HER) kinetics. The optimized BSCN achieved an exceptional H2 evolution rate of 14.409 mmol g−1 h−1, approximately 75-fold and 3.4-fold higher than pristine BCN and SCN, respectively. This work establishes a rational doping-mediated approach for designing high-efficiency g-C3N4 homojunctions and provides mechanistic insights into S-scheme charge transfer for solar-driven H2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4493-8
Metal halide perovskite photovoltaics have achieved power conversion efficiencies rivaling crystalline silicon, yet their transition from laboratory-scale devices to commercial deployment requires a paradigm shift toward application-specific engineering and macroscopic system integration. This review systematically evaluates the customized deployment of perovskite solar cells (PSCs) across diverse operational theaters, including building-integrated photovoltaics (BIPV), portable Internet of Things (IoT) systems, agricultural photovoltaics (Agri-PV), vehicle-integrated photovoltaics (VIPV), utility-scale tandems, and extreme space environments. Despite these opportunities, critical challenges persist in translating laboratory achievements into industrial-scale production. We critically evaluate primary bottlenecks hindering gigawatt-scale commercialization, focusing on the performance gap inherent in large-area manufacturing. Additionally, we analyze intrinsic material instabilities driven by dynamic ion migration and multi-scale lattice strain under realistic outdoor conditions. To conclude, we outline a strategic roadmap for overcoming these barriers, emphasizing lattice strain regulation, rigorous dynamic environmental testing protocols, and comprehensive sustainable lifecycle management. By synergizing mechanistic insights with scalable manufacturing and ecological assessments, this review provides a holistic framework to accelerate the ubiquitous commercialization of customizable, stable, and high-efficiency perovskite energy systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4273-3
Freestanding membranes have driven a profound evolution of strain engineering by fundamentally overcoming the substrate clamping effect. This structural degree of freedom enables the introduction of spatially complex, reversible, and giant strain fields into the membranes via mechanical manipulations such as stretching, bending, and interfacial twisting, ultimately facilitating the modulation of diverse physical properties. This review systematically discusses recent experimental and theoretical advances in the field, highlighting the modulation of physical properties via uniaxial/biaxial strain, strain gradients, and oxide twist. These mechanical strain strategies substantially broaden the range of achievable material properties, furthermore provide fundamentally new pathways for realizing unconventional mechanical behaviors, inducing emergent polar topological structures, and exploring correlated electronic states. Finally, this review summarizes current methodologies for implementing emergent strain engineering of oxide membranes, delves into the profound impacts of spatially complex strain on the fundamental physical properties of freestanding oxides, and offers a forward-looking perspective on the tremendous opportunities and challenges in this rapidly evolving field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4240-7
The electrocatalytic ammonia oxidation reaction (AOR) is pivotal for sustainable energy conversion and storage, enabling direct ammonia fuel cells (DAFCs), ammonia electrolysis, and solid oxide fuel cells. This review critically examines recent advances in AOR catalysis, emphasizing active-site regulation, interfacial engineering, and device-oriented catalyst development. For noble-metal catalysts, optimizing adsorption and dehydrogenation of NHx intermediates while mitigating poisoning is essential for sustained activity. Non-noble-metal systems, particularly Ni-based catalysts, require precise control of reconstructed working-state phases such as NiOOH-like species to balance activity and selectivity. Interfacial engineering, including heterointerfaces, defect structures, and doped coordination environments, strongly influences the competition between AOR and oxygen evolution reaction (OER), as well as product branching toward N2 or oxygenated nitrogen species. The review underscores that catalyst optimization now extends beyond bulk composition to the precise regulation of the interfacial reaction microenvironment. Furthermore, practical device operation is governed by membrane/electrolyte compatibility, mass transport, ammonia crossover, thermal management, and long-term durability. Bridging fundamental catalyst studies with deployable ammonia energy technologies requires coordinated optimization from active materials to electrode architectures and full-device systems. This review provides a comprehensive framework for designing next-generation AOR catalysts and accelerating their integration into industrial energy systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4295-5
Carbon nanomaterials (CNMs), including carbon nanotubes, graphene, and fullerenes, exhibit exceptional promise in precision biomedicine due to their tunable biocompatibility, programmable surface chemistry, large specific surface area, and quantum confinement effects. However, their clinical translation is hindered by aggregation, poor physiological dispersibility, and limited targeting specificity. This review systematically elaborates on surface engineering strategies—covalent functionalization, non-covalent assembly, and heteroatom doping—to optimize the multifunctionality, biocompatibility, and targeting capabilities of CNMs at the nano-bio interface. We explore how engineered interfaces enable advanced applications in biosensing, stimuli-responsive drug delivery, multimodal bioimaging, antibacterial therapy, and regenerative tissue engineering. The review also addresses challenges such as scalability, long-term toxicity, and regulatory hurdles, and proposes future directions to expedite clinical adoption. By providing a comprehensive framework for rational surface design, this work aims to bridge the gap between fundamental materials science and clinical needs, offering a roadmap for developing next-generation carbon-based theranostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4302-9
The pre-deposited lead iodide (PbI2) film in two-step inverted perovskite solar cells (PSCs) often exhibits a dense structure, which impedes the diffusion and reaction of organic ammonium salts, leading to unreacted PbI2 residues and compromised device performance. To address this, 2,4-oxazolidinedione (OD) is introduced as a molecule additive into the PbI2 precursor solution. Owing to its stronger coordination with PbI2, OD effectively modulates its crystallization behavior, resulting in a porous structure. This porous structure significantly facilitates the diffusion and infiltration of organic ammonium salts, thereby minimizing PbI2 residue and enhancing the completeness of the perovskite conversion. Furthermore, OD and the constructed porous network jointly retard the crystallization kinetics of perovskite, promoting the formation of perovskite films with improved crystallinity and preferred crystal orientation. Therefore, the optimized PSCs achieve a power conversion efficiency (PCE) of 26.31%, and demonstrate excellent operational stability, retaining 90.24% of initial PCE for 1500 h at 25°C and 90.47% after 1000 h at 65°C. The champion device exhibits a VOC of 1.197 V, a JSC of 26.28 mA cm-2, and an FF of 83.58%, with negligible hysteresis. This study presents a straightforward yet effective approach to advancing the performance and stability of inverted PSCs fabricated via the two-step method.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4260-5
Lithium-sulfur batteries (LSBs) are recognized as a leading candidate for next-generation energy storage due to their high theoretical specific capacity (1675 mAh g⁻¹). However, the shuttle effect of lithium polysulfides (LiPSs) severely limits cycle life and energy efficiency. Here, we report a multi-interface engineering strategy employing a MnO₂-TiO₂@Ti₃C₂ MXene (MT@MX) heterojunction, synthesized via a facile redox reaction between MXene and KMnO₄, to modulate bidirectional polysulfide conversion. The 2D structure with high conductivity and abundant heterogeneous interfaces facilitates fast ion/electron transfer, reduces reaction energy barriers, and enhances adsorption via d-band center effects. The stepped built-in electric field (BIEF) in MT@MX lowers the migration energy barrier of LiPSs from catalytic MXene to TiO₂ and then to adsorptive MnO₂, enabling reversible migration across multi-interfaces. Optimized heterointerfaces synergistically integrate adsorption, diffusion, and catalytic conversion, yielding excellent cycling stability even at a high sulfur loading of 6.4 mg cm⁻². This work demonstrates that constructing heterojunctions with stepped BIEF offers a feasible approach to modulate interfacial diffusion and provides a new design strategy for high-performance LSB electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4303-7
Sodium-ion batteries (SIBs) are promising for grid-scale storage and low-speed electric vehicles, yet their electrochemical behavior is governed by intricate mechanical-electrochemical coupling effects, rendering failure mechanisms not fully understood. Here, we develop an in-situ pressure-electrochemical monitoring system and reveal the failure mechanism of commercial Ah-level NaNi1/3Fe1/3Mn1/3O2//hard carbon (NNFMO//HC) sodium-ion pouch cells. Under an initial external pressure of 500 kPa, the full cell retains 90.07% of its capacity after 500 cycles at 0.5 C. Operating at the optimal pressure of 500 kPa effectively avoids heterogeneous sodium deposition in HC anodes, suppresses gas evolution from electrolyte decomposition, and prevents irreversible phase transitions in NNFMO cathodes during long-term cycling, thereby mitigating capacity degradation. Deviation from this optimal pressure leads to spatially non-uniform sodium deposition, accelerated electrolyte decomposition, and irreversible cathode phase transitions, collectively accelerating capacity fade. This work establishes a quantitative relationship between external pressure and pouch cell degradation, advancing SIBs development and application.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4339-7
Neuromorphic computing demands energy-efficient synaptic devices that emulate biological plasticity. Optoelectronic memristors based on colloidal quantum dots (QDs) offer tunable bandgaps and solution processability, yet suffer from defect-mediated nonradiative recombination and instability. Here, we report ZnS-passivated CdZnSe core/shell QDs as the active layer in memristive devices, achieving enhanced synaptic emulation and information encryption. Time-resolved photoluminescence (TRPL) decay curves were fitted with a tri-exponential function, revealing that ZnS passivation suppresses defect-related trap states, prolonging the average carrier lifetime from 12.3 ns (CdZnSe) to 28.7 ns (CdZnSe/ZnS). The intensity proportion of the fast decay component (τ1 ≈ 1.2 ns) decreased from 45% to 18%, indicating reduced surface trapping. Devices incorporating CdZnSe/ZnS QDs exhibit stable bipolar resistive switching with an ON/OFF ratio exceeding 10^3, endurance of >10^3 cycles, and retention of >10^4 s. Under 365 nm UV illumination, the devices show light-tunable synaptic plasticity, including paired-pulse facilitation (PPF) with a facilitation index of 180% at a 50 ms interval, and transition from short-term to long-term memory. The memristors successfully emulate essential synaptic functions and are employed in a simple encryption scheme, demonstrating the potential of defect-passivated QDs for secure neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4250-0
Shape memory polymer (SMP)-based transfer printing offers a promising route for heterogeneous integration of flexible electronics, yet non-contact release reliability remains a critical bottleneck. This study systematically investigates the influence of pickup heating modes—localized versus global—on the release yield and energy-delivery mechanisms through combined experiments and finite element simulations. The localized heating mode concentrates strain energy at the interface, enabling controlled chip ejection with high yield, whereas global heating dissipates energy, leading to release failure. Quantitative analysis reveals that localized heating achieves a release yield of 100% under optimized conditions, compared to near-zero for global heating. The ejection velocity under localized heating is higher, which may induce chip bouncing on the receiver substrate, affecting transfer accuracy; however, this can be mitigated by adjusting release gap and laser parameters. The findings establish a theoretical framework for energy pathway design, providing guidelines for achieving high-yield, accurate non-contact release in laser-induced transfer printing. This work advances the practical application of SMP-based transfer printing for micro-LED displays and flexible electronics, addressing a key manufacturing bottleneck.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4344-5
Germanium-based materials (Ge-based) have been explored as anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity (369 mAh g-1) and moderate potassium insertion potentials. However, their application is hindered by volume expansion and unstable solid electrolyte interphase films. This review systematically synthesizes recent advances in Ge-based materials (encompassing metallic Ge, oxides, chalcogenides, and alloys), with an emphasis on structure-performance relationships to elaborate synergistic optimization strategies. Key optimization strategies such as nanostructuring, composite design with conductive supports, interfacial engineering, doping, and electrolyte modification are elaborated. The potassium storage mechanisms of different materials are compared, and the effectiveness of various modification strategies is evaluated under different operating conditions. High-throughput computations are integrated with experimental validation to guide material and electrolyte design. A life cycle assessment perspective is also introduced to evaluate the sustainability and practical viability of Ge-based materials. Given the high cost and low abundance of Ge, these materials are more suitable for niche applications where high energy density is critical, rather than large-scale grid storage. The review underscores the necessity of balancing electrochemical performance with economic and environmental considerations, proposing a roadmap for future research that prioritizes cost-effective synthesis and scalable manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4202-3
Carbon dots (CDs) with absorption in the second near-infrared window (NIR-II, 900-1700 nm) hold promise for tumor theranostics, yet existing synthesis methods often involve complex procedures, harsh conditions, or lack precise control. Here we report a 'self-photooxidation-restructuring' strategy that enables structural reorganization of the carbon core in CDs, achieving a significant redshift of absorption into the NIR-II region. Under ultraviolet (UV) light irradiation, the precursor (B-CDs, absorption in UV region) generates singlet oxygen, which self-oxidizes aldehyde groups and the carbon skeleton of B-CDs to stronger electron-withdrawing carboxyl groups and carbon radicals, respectively. These processes facilitate the formation of new C=C bonds between isolated aromatic domains, thereby transforming B-CDs into novel CDs (N-CDs) characterized by enhanced donor-acceptor interactions and a redshift in absorption toward the NIR-II window. Various experimental data, including high-resolution XPS, FTIR, NMR, EPR, have proved the proposed formation mechanism. The novel N-CDs afforded a high photothermal conversion efficiency of up to 71.33%, which enabled 1064 nm laser-activated photoacoustic imaging (PAI)-guided photothermal therapy (PTT) in tumors. This work opens a new avenue for the synthesis and modulation of CDs in the NIR-II region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4394-x
Spiral graphene, characterized by Bernal-stacked layers and unique electronic properties, holds promise for advanced quantum and optoelectronic devices. However, its controlled synthesis remains challenging. Here, we report the self-assembly growth of single-crystal spiral graphene on a liquid heterogeneous substrate via chemical vapor deposition (CVD). A 50-μm-thick Cu foil was placed on a Ni support and heated to 1083 °C, the melting point of pure Cu, ensuring a fully molten Cu layer on solid Ni. Growth proceeded for 30 minutes under optimized conditions. The resulting spiral graphene exhibits a uniform Bernal stacking configuration, as confirmed by transmission electron microscopy and selected-area electron diffraction. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) depth profiling and isotope-labeling experiments reveal that carbon incorporation occurs predominantly at the spiral step edges, following a self-assembly mechanism driven by the liquid substrate's dynamic surface. Control experiments on solid Cu-Ni alloys yield no spiral morphology, underscoring the critical role of the liquid phase. The liquid heterogeneous substrate facilitates rapid carbon diffusion and step-edge attachment, enabling the growth of high-quality single-crystal spirals with controlled layer number. This work provides a scalable route to synthesize spiral graphene with tailored stacking, advancing its application in twistronics and high-performance electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4381-5
Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4376-3
Single-molecule localization microscopy (SMLM) surpasses the diffraction limit to achieve molecular-scale resolution, but conventional probes suffer from photobleaching, limiting imaging duration. In a recent Nature Photonics article, Ren and co-workers introduced spontaneous photoblinking upconversion microscopy (SPUM) using Yb3+/Ho3+ co-doped core–shell–shell upconversion nanoparticles (UCNPs, NaYF4@NaYb/HoF4@NaLuF4). These UCNPs exhibit exceptional photostability and persistent, reversible blinking under 976 nm continuous-wave excitation, with negligible photodegradation. The blinking mechanism involves a Yb3+ multiphoton process coupled with defect-mediated energy trapping, switching the UCNPs between emissive (on) and non-emissive (off) states. Kinetic analysis revealed single-exponential bright-state dwell times and biexponential dark-state dwell times, indicating one decay pathway into a non-emissive state and two recovery pathways. In live-cell imaging, synchronized transport of UCNPs maintained constant interparticle distance and near-unity positional correlation. In fixed cells, Fourier ring correlation (FRC) resolution reached 30 nm, confirming sub-50 nm performance in biological specimens. This work provides an unprecedented combination of low duty cycle and photostability, establishing a foundation for non-photobleaching luminescent nanomaterials in long-term super-resolution imaging and nanoscale tracking.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4201-0
Open fracture fixation faces dual critical challenges: bacterial infection and impaired bone healing. This study presents a rationally designed biomacromolecular network coating (Ti-GOED) on titanium alloy bone plates to simultaneously address these issues. The coating integrates antimicrobial and osteogenic components, achieving an optimal balance between antibacterial efficacy and biocompatibility. In vitro assays demonstrated that Ti-GOED eliminates over 99% of common pathogenic bacteria by inhibiting peptidoglycan synthesis, disrupting bacterial cell wall formation, compromising membrane integrity, and leading to intracellular DNA leakage and bacterial death. Concurrently, Ti-GOED enhances the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) via activation of the PI3K-Akt and HIF-1 signaling pathways. In vivo animal experiments confirmed strong antibacterial and osteogenic properties. This work provides a strategy for developing antibacterial coatings on medical devices, with significant potential for preventing and treating infections post-fracture fixation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4292-4
The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4369-1
Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries for large-scale energy storage due to sodium's abundance and low cost. Among cathode materials, polyanionic compounds like Na3V2(PO4)2O2F (NVPOF) offer high energy density and dual voltage plateaus at ~3.6 and 4.0 V, but suffer from low electronic conductivity and sluggish Na+ diffusion. Here, we report a dual-modulation strategy combining high-valence Nb5+ doping and polydopamine-derived carbon coating to synthesize Na3V1.94Nb0.06(PO4)2O2F-C (NVPOF-Nb-C) via a hydrothermal route. X-ray diffraction and Rietveld refinement confirm that Nb5+ doping induces slight lattice expansion without altering the tetragonal I4/mmm framework. Density functional theory calculations reveal that Nb5+ doping optimizes the crystal structure and reduces the Na+ diffusion barrier, while the uniform carbon coating enhances electron transport. Consequently, NVPOF-Nb-C exhibits remarkably improved electrochemical performance, including high reversible capacity, excellent rate capability, and ultralong cycling stability. In a full cell with hard carbon anode, it delivers a high energy density of 487.2 Wh kg−1 at 1C and retains 91.51% capacity after 3000 cycles at 20C. This work provides a synergistic strategy to overcome the intrinsic limitations of polyanionic cathodes for practical SIB applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4205-8
The global energy crisis and environmental pollution necessitate efficient recovery and utilization of thermal energy resources such as industrial waste heat. Thermoelectric materials, enabling direct conversion between thermal and electrical energy, offer broad application prospects in waste heat power generation and chip cooling. The energy conversion efficiency is determined by the dimensionless figure of merit, ZT = (S^2σ/κ)T, where S is the Seebeck coefficient, σ is the electrical conductivity, κ is the thermal conductivity, and T is the absolute temperature. Ideal thermoelectric materials require both a high power factor (PF = S^2σ) and low thermal conductivity. However, the strong coupling between electrical and thermal transport parameters makes synergistic optimization challenging. Over the past two decades, strategies such as band engineering, nanostructuring, liquid-like ions, interstitial atoms, phonon softening, and defect engineering have been explored. Among these, entropy engineering has emerged as a novel strategy that achieves synergistic optimization by introducing multiple components to increase configurational entropy. High entropy materials, originating from alloys, are defined as multi-principal element systems with five or more elements in near-equiatomic ratios forming single-phase solid solutions. The molar configurational entropy ΔS_conf = R∑x_i ln x_i, with materials classified as high entropy (ΔS_conf > 1.5R), medium entropy (1R < ΔS_conf < 1.5R), or low entropy (ΔS_conf < 1R). Four core effects are summarized: high entropy effect, lattice distortion effect, sluggish diffusion effect, and cocktail effect. Research has expanded from alloys to oxides, chalcogenides, and half-Heusler compounds. This review systematically summarizes the mechanisms by which lattice distortion in high entropy materials affects electrical and thermal transport, and discusses optimization strategies for thermoelectric performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4315-2
High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4180-9
Developing highly active and stable electrocatalysts based on the lattice oxygen mechanism (LOM) for the oxygen evolution reaction (OER) represents a significant challenge in water splitting. Herein, we successfully introduce oxygen vacancies (Ov) into high-entropy MnFeCoNiCu layered double hydroxides (HE-LDHs) via a solution chemical reduction method utilizing a defect engineering strategy. By precisely tuning the concentration of oxygen vacancies, we effectively activate the lattice oxygen within the HE-LDHs. The optimized Ov-rich high-entropy LDHs (Ov-HE-LDHs) exhibit excellent OER catalytic performance, achieving a current density of 10 mA cm−2 with a remarkably low overpotential of only 210 mV in 1.0 M KOH electrolyte, which is substantially superior to pristine HE-LDHs (315 mV) and commercial IrO2 (330 mV). Furthermore, the catalyst demonstrates outstanding long-term stability, capable of stable operation for 500 h at a high current density of approximately 200 mA cm−2. Advanced X-ray absorption fine structure analysis elucidates the lower metal valence states, indicating the existence of oxygen vacancies, while isotope labeling experiments and in-situ electrochemical Raman spectroscopy strongly confirm the successful activation of the LOM pathway. Density functional theory calculations further validate that the shift in the OER mechanism towards LOM and the resulting reduction in the reaction energy barrier are the fundamental reasons for the catalyst’s enhanced intrinsic activity. This work proposes a novel strategy for activating lattice oxygen in high-entropy LDHs through defect engineering, offering new insights and experimental guidance for the design and development of highly efficient and stable high-entropy OER electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4237-x
Silicon-based (Si-based) anodes are core candidates for next-generation high-energy solid-state batteries (SSBs) due to their high theoretical capacity (~4200 mAh g−1). However, their practical application is constrained by the 'size effect', which influences mechanical integrity and electrochemical performance. This review systematically examines the failure mechanisms of nano-silicon (nSi) and micro-silicon (mSi) anodes when paired with sulfide and organic-inorganic composite solid-state electrolytes (SSEs). Key functional parameters of these SSEs are discussed, along with strategies to mitigate interfacial impedance and accommodate volume changes. Recent progress in structural and interface modifications is highlighted, including the use of hard-carbon-stabilized Li–Si anodes (achieving stable cycling) and pressure-free operation. The review identifies core challenges, such as achieving intimate solid–solid contact and managing mechanical stress, and outlines future directions for 'size effect' regulation to accelerate commercialization of high-energy Si-based SSBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4234-3
The pursuit of high-energy-density sodium-ion batteries (SIBs) necessitates the development of stable high-capacity anodes. While amorphous carbon is a promising anode candidate for SIBs, its practical application is hindered by limited capacity. Herein, we design a composite anode by chemically confining a high-content (~25 wt%) short-chain sulfur into hierarchical porous hard carbon microspheres (SHHC) derived from microbe yeast. The SHHC anode exhibits a high reversible capacity of ~807 mAh g−1 at 0.03 A g−1 (~3 times that of conventional amorphous carbon) along with superior rate capability, and extraordinary long-term cyclability (almost 100% capacity retention after 2000 cycles at 1.0 A g−1). The high-content sulfur species contribute to superb redox reactivity for high-capacity sodium storage via a surface-dominated storage mechanism. The carbon matrix features an enlarged interlayer distance, which facilitates Na-ion intercalation and deintercalation for high-rate capability. Furthermore, the hierarchical porous structure with built-in cavities facilitates the Na-ion transfer and effectively accommodates the electrode’s volume expansion, achieving fast electrode kinetics and outstanding cyclability. Such a combination of favored properties leads to state-of-the-art comprehensive battery performance for Na-ion storage. Our finding envisions a new perspective on building stable high-capacity anode materials for SIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4317-4
This correction addresses an image assembly error identified in Fig. 7a of the original article published in Science China Materials, volume 66, issue 6, 2023, pages 2513–2522. The error was confined to the assembly of images in Fig. 7a, which presents H&E staining analysis of major organs from a toxicity study. The corrected version of Fig. 7 is provided in this corrigendum. The original study evaluated the toxicity of lyophilized cabazitaxel (CTX) and Tween 80-based CTX formulations in CD-1 mice following a single intravenous administration of 30 mg kg−1 CTX via the tail vein on day 0, with sacrifice on day 14 for analysis (n=5). The figure includes H&E staining of major organs, complete blood count (CBC) analysis with statistical significance indicated by *p < 0.05, and mouse weight measurements. The correction does not affect the overall results, data interpretation, or scientific conclusions of the original article. All authors have reviewed and approved the content of this corrigendum. The authors sincerely apologize for any inconvenience caused to the editorial office, reviewers, and readers. The article was received on 6 May 2026, accepted on 4 June 2026, and published online on 31 July 2026.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4200-0
Self-powered broadband photodetectors are pivotal for next-generation intelligent healthcare. Solution-processed mercury sulfide (HgS) is an attractive near-infrared absorber but is limited by interfacial instability, high defects, and sluggish response. Inspired by sulfur-mediated adhesion in Alhagi sparsifolia, a bioinspired interfacial engineering strategy employs an antimony sulfide (Sb2S3) interlayer to construct a bidirectional chemical bonding network. The Sb2S3 interlayer simultaneously forms Sb–O bonds with fluorine-doped tin oxide (FTO) substrates and Sb–S/Hg–S bonds with the HgS layer, thereby reinforcing interfacial adhesion, passivating coordination-unsaturated defect states, and establishing a type-II heterojunction with a strong built-in electric field. The resulting Sb2S3/HgS photodetector exhibits self-powered operation, broadband sensitivity spanning the visible to near-infrared region (642–1550 nm), an ultrafast response time of 2.47 ms, a detectivity up to 1.7 × 10^11 Jones, and retaining nearly constant photocurrent over 5000 continuous on-off switching cycles as well as prolonged air exposure. Beyond device-level performance, we demonstrate its utility in intelligent healthcare scenarios, including machine-learning-assisted liquid drug identification, binary-coded optical wireless communication, and high-fidelity photoplethysmography monitoring. This work establishes biomimetic bidirectional bonding as a generalizable paradigm for stabilizing solution-processed chalcogenide optoelectronics and accelerates the integration of self-powered broadband photodetectors into intelligent healthcare systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4322-4
Ultrafast scintillators with low-nanosecond emission are essential for next-generation high-rate X-ray and particle imaging. Although Ce3+-activated scintillators inherently exhibit fast response characteristics, conventional Ce3+-doped hosts rarely achieve low-nanosecond ultrafast decay. Here, we report a high-entropy fluoride scintillator (HEFS), Ce:LaGdCaSrBaF12 (Ce:LGCSB), in the form of bulk single crystals. The severe lattice distortion arising from multi-cation disorder induces exciton localization and effectively suppresses exciton diffusion. Through the rapid relaxation of localized excitons, the high-entropy Ce:LGCSB single crystals deliver a decay time of 1.23 ns with a 94.6% fast-component contribution and without any noticeable slow component. Through first-principles calculations, spectroscopic characterization, and transient dynamics analysis, we reveal that the ultrafast response originates from accelerated Frenkel exciton (FE) recombination enabled by the high-entropy environment. This work establishes entropy-engineered fluorides as promising ultrafast scintillator platforms and proposes a general strategy for extending sluggish diffusion effects to the excitonic scale, offering new opportunities for improving scintillation timing performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4232-1
Polyanionic cathode materials are widely considered as potential cathode materials for sodium-ion batteries due to their strong three-dimensional framework and intrinsic thermal safety. Nevertheless, the limitation of the specific capacity and energy density hindered their application, which can be ascribed to the common reliance of single-electron redox reaction of the transition metal. By realizing the reversible double redox reaction of vanadium-based and manganese-based polyanion cathodes, researchers have successfully opened up a new way to break through the long-term performance limitations. Recent studies disclose that vanadium and manganese-based polyanionic cathodes exhibit the possibility of realizing a reversible double-redox reaction, which opened up new avenues to overcome the capacity dilemma. However, many fundamental issues remain unclear, including insufficient structural stability at high operating voltages, irreversible structural evolution induced by sodium extraction, sluggish electronic and ionic transport kinetics, and Jahn–Teller distortion. Therefore, it is imperative to summarize recent work in order to clarify the pathway for future investigation. In this review, the key challenges associated with the activation of the double-redox reaction are outlined, followed by the realization and regulation of the double-redox reaction in polyanionic cathode materials. A systematic summary of recent studies is performed for both vanadium and manganese-based compounds, which could contribute to the fundamental understanding of the double-redox reaction mechanism. Combined with the modification strategy and future perspective, this review provides insights into the rational design of polyanionic cathodes with a reversible double-redox reaction. It also offers insights into the development of high-energy-density cathode materials for next-generation sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4106-8
Perovskite/organic tandem solar cells (PO-TSCs) have emerged as a compelling photovoltaic architecture to transcend the Shockley-Queisser limit of single-junction devices. By monolithically stacking a wide-bandgap (WBG) perovskite top cell and a narrow-bandgap (NBG) organic bottom cell, PO-TSCs enable broad spectral utilization and reduced thermalization loss, offering a viable pathway toward efficiencies beyond 30%. Their solution processability, compatibility with orthogonal solvents, and potential for lightweight, flexible, and semi-transparent modules further make them attractive for building integrated and portable electronics. However, the realization of high-performance PO-TSCs critically depends on precise carrier regulation across the entire multilayer stack, where inefficient charge transport, recombination losses, and interfacial bottlenecks often limit the overall power conversion efficiency (PCE) and stability. This review systematically examines the carrier-regulation strategies essential for advancing PO-TSCs, focusing on defect and phase-control in WBG perovskites, the design of optically transparent and electrically efficient interconnecting layers, and the enhancement of charge generation and collection in organic subcells. The integration of these approaches has recently enabled efficiencies exceeding 26%, demonstrating the rapid progress of the field. Ultimately, we conclude with an outlook on the remaining challenges in scalability, operational stability, and manufacturability, providing a roadmap for future research toward commercially viable tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4114-5
The precise and controllable synthesis of one-dimensional (1D) and two-dimensional (2D) heterostructures, coupled with the manipulation of their atomic and electronic configurations, is of paramount significance. However, due to the synthetic challenges associated with graphyne (GY) materials, their integration into 1D/2D heterostructures remains considerably difficult. Herein, we demonstrate a post-synthetic intercalation strategy for tellurium onto Ag(111), enabling the controllable fabrication of 1D-GY-nanowire/2D-AgTe-monolayers heterostructures. Scanning-probe microscopies are employed to characterize morphological evolution during the intercalation process. Scanning tunneling spectroscopy results confirm that AgTe monolayer intercalation induces interfacial decoupling of the graphyne nanowires. Density functional theory calculations demonstrate that work function-driven Fermi level modulation via interfacial charge engineering assigns the 1D-GY-nanowire/2D-AgTe-monolayers heterostructures as type-I heterostructures. Our work not only significantly advances the fundamental understanding of interfacial interactions in 1D/2D heterostructures but also presents a scalable strategy for designing heterostructures with tailored electronic functionalities, thereby opening new avenues for applications in advanced nanoelectronics and optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4251-2
The human vascular system, characterized by multi-scale topological complexity, serves as the fundamental infrastructure for nutrient transport, hemodynamic regulation, and immune surveillance. Replicating this system is critical for injury repair, disease modeling, and organ-on-a-chip development, yet a key gap persists between structural mimicry and full functional reproduction. This review evaluates how emerging 3D printing strategies are advancing beyond geometric imitation toward integrated physiological functions, thereby helping to bridge this divide. Over the past decade, 3D printing has advanced significantly in functional vascular reconstruction via precise molding and cell-material integration. This review summarizes the latest progress, including material design, molding methods, and structural optimization, focusing on 3D printing breakthroughs in three core scenarios: high-fidelity in vitro vascular models, in vivo tissue functional replacement, and vascularized organ-on-a-chip systems. Furthermore, this review delves into the existing challenges and future prospects of these application directions. Keywords: vascular reconstruction, 3D printing, bionic vessels, hydrogel.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4213-x
Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4258-0
High-entropy noble-metal-based catalysts (HENCs) have emerged as a frontier in electrocatalysis, leveraging the synergistic effects of high-entropy alloys and noble metals to achieve exceptional atomic utilization, tunable electronic structures, and vast compositional space. Their anisotropic architectures confer superior dissolution resistance, rapid electron/mass transfer, and abundant active sites. This review systematically categorizes advanced structural regulations—grain boundary engineering, single-atom alloys, intermetallic compounds, amorphous structures, and core@shell configurations—and evaluates their impact on electrocatalytic performance. By modulating surface electronic states and lattice strain, these strategies optimize reaction kinetics and durability. Notable applications include oxygen reduction (ORR), oxygen evolution (OER), hydrogen evolution (HER), and CO2 reduction (CO2RR). Despite progress, challenges persist in scalable synthesis, mechanistic understanding, and long-term stability. This review underscores the potential of HENCs to bridge laboratory innovation and industrial deployment, providing a roadmap for future catalyst design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4217-y
Rational design and construction of effective photocatalysts is a promising way for green and sustainable chemistry, but still a great challenge. Herein, taking triphenylamine-containing aldehydes as reactants, two covalent triazine frameworks (CTFs), tris(4-formylphenyl)amine (TPA)-CTF and tris(4-formylbiphenyl)amine (TBPA)-CTF, were rationally constructed. The strong electron donor property of the triphenylamine moieties derived from the initial reactants and the strong electron acceptor nature of the in-situ formed built-in triazine rings in CTFs endowed these robust triphenylamine-based CTFs with donor-acceptor (D-A) or donor-π-acceptor (D-π-A) structure features. Photocatalytic experiments revealed that, compared with the controlled phenyl analogue CTF, 1,3,5-tri(p-formylphenyl)benzene (TFPB)-CTF, both of the triphenylamine-based CTFs exhibited superior photocatalytic activity not only in photocatalytic hydrogen peroxide generation, but also in photocatalytic aerobic oxidations of diverse organic substrates. Theoretical studies further confirmed that their enhanced photocatalytic performance should be attributed to their unique D-A or D-π-A features in the constructed triphenylamine-based CTFs. This work successfully demonstrated that rational selection of reactants containing electron donor moieties to construct CTFs should be a reliable way for the construction of effective photocatalysts for photocatalytic oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3775-3
The urgent imperative for carbon-neutral chemical production has accelerated the development of solar-driven catalytic technologies that convert abundant C1 feedstocks (CO2 and CH4) into value-added C2+ molecules. Standalone photocatalysis remains constrained by rapid charge-carrier recombination and poor C–C coupling selectivity. This review critically examines multi-field-coupled catalysis—a transformative paradigm synergistically integrating solar energy with auxiliary thermal, electric, and magnetic fields. Through mechanistic dissection of photothermal, photoelectrochemical, and photomagnetic field cooperativities, it is summarized that thermal gradients attenuate phonon scattering to enhance charge-carrier drift mobility while vibrationally stabilizing reactive intermediates, electric potentials drive vectorial charge transport via Coulomb-force-directed separation and band alignment, and magnetic fields modulate spin-selective electron transfer through Zeeman splitting-mediated polarization to boost reaction specificity. This synergistic multi-field integration circumvents intrinsic limitations of single-mode photocatalysis by collectively reconfiguring reaction coordinates for selective C–C coupling. We further address persistent challenges in resolving ultrafast interfacial charge-transfer dynamics, scaling integrated field reactors for industrial deployment, and advancing in situ operando characterization of multiscale processes. Strategic research priorities are proposed to advance sustainable multi-field-coupled catalytic production of fuels and platform chemicals.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3828-y
The rapid development of halogen-free solvent-processed organic solar cells (OSCs) has been enabled by side-chain modification on small molecular acceptors, yet the structure-property relationship between inner/outer chain lengths and device performance remains unclear. This study systematically investigates five non-fullerene acceptors (NFAs) with varied side-chain positions and architectures, clarifying the effects of inner versus outer modifications on energy level distribution, film morphology, and carrier dynamics. Notably, longer alkyl chains are not always superior; excessive solubility reduces molecular packing order. The optimized PM6:BTP-TO12 blend achieves a power conversion efficiency (PCE) of 18.2%. Furthermore, ternary OSCs incorporating BTP-TO12 as a guest material reach a remarkable PCE of 19.5%, enhancing the performance of L8-BO-based devices processed with green solvents. This improvement is attributed to the low energy loss and well-controlled aggregation behavior of BTP-TO12 in environmentally friendly toluene. These findings establish a design guideline for side-chain engineering in green-solvent-processed OSCs, achieving state-of-the-art performance and advancing scalable, eco-compatible photovoltaic technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3582-9
Perovskite quantum dots (PQDs) hold great potential for brain-like neuromorphic computing. However, the development of PQDs-based synaptic devices is hindered by interfacial defects and limited stability. Here, we demonstrate a high-performance Cs2AgBiBr6 QDs/organic single crystal heterojunction synaptic device, fabricated via a novel space-confined vertical growth technique combined with a polymer-free transfer process. Vertically grown organic single crystals enable superior carrier mobility and facilitate the formation of low-defect interfaces with PQDs. The heterojunction exhibits remarkable photosensitivity (7.22 × 10^5 at 425 nm) and detectivity (2.15 × 10^15 Jones), owing to the strong optical absorption of PQDs coupled with the superior charge transport characteristics of organic single crystals. Notably, the device achieves dual-functional light adaptation, emulating synaptic behaviour under blue light while exhibiting photo-switching under green/red light. This unique capability enables smart blue-light hazard protection. This work not only provides a versatile platform for high-performance PQDs-based synaptic devices but also advances the development of brain-inspired neuromorphic systems for next-generation computing and intelligent sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3709-4
Photoelectrocatalytic (PEC) detoxification of ofloxacin in hyposaline wastewater is hindered by weak built-in electric fields (IEF) and rapid charge recombination. Here, we report a crystal dipole engineering strategy using high-valence Mo-doped BiVO4 to enhance IEF and PEC activity. Mo incorporation breaks lattice symmetry, increasing the crystal dipole moment and amplifying IEF to 2.05 times that of pristine BiVO4. This promotes directional carrier migration, improving electron-hole separation efficiency. The optimized 4% Mo-BiVO4 photoanode achieves 96.5% ofloxacin degradation within 60 minutes and maintains 91.9% degradation efficiency in natural lake water containing saline and organic interferents, demonstrating exceptional anti-interference capability. This work provides a strategy for boosting photocatalytic performance through unit-cell dipole engineering, aiming to enhance sustainability in wastewater treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3579-8
Metal sulfides such as CdS are promising for solar-driven H2O2 production but suffer from rapid charge recombination and severe photocorrosion. This study introduces a dual-functional strategy synergizing sulfur vacancy (Sv) engineering and polydopamine (PDA) coating to overcome these limitations. Sv-CdS nanorods were hydrothermally synthesized with tunable vacancy concentrations, followed by in-situ PDA deposition to construct a direct Z-scheme heterojunction. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations reveal that the introduction of S vacancies reduces the work function of CdS, facilitating energy level alignment with PDA and enabling efficient electron transfer from CdS to PDA. By tuning the concentration of S vacancies, the charge transfer efficiency can be maximized. As a result, the photocatalytic H2O2 production rate reaches 2539.5 μmol g−1 h−1 under visible light, and further increases to 4395.5 μmol g−1 h−1 after PDA encapsulation—15.6 times higher than that of pristine CdS. Concurrently, PDA enhances O2 adsorption and protects Sv-CdS from photocorrosion. Sv-CdS@PDA exhibited superior photostability compared to Sv-CdS after three consecutive photocatalytic cycles. Mechanistic studies suggest that the Z-scheme heterojunction effectively separates electron-hole pairs: electrons in the conduction band of CdS reduce O2 to ·O2−, which is subsequently converted to H2O2, while holes in the valence band of Sv-CdS oxidize water to replenish O2. This work provides fundamental insights into engineering charge transfer and stability in sulfide-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3803-8
The molecular copolymerization of donor-acceptor (D-A) interactions has been effectively utilized to modulate the charge transfer dynamics in polymeric carbon nitride (PCN) photocatalysts. Herein, a D-A configured photocatalyst (TPCN) was constructed by copolymerizing 4,4’,4’’-(1,3,5-triazine-2,4,6-triyl) trianiline (TAPT) as the electron donor with triazine units (electron acceptor). The unique propeller structure of TAPT, combined with the triazine framework, expanded the π-conjugated system and induced a strong built-in electric field (BIEF) across the D-A configuration. Theoretical calculations and transient absorption spectroscopy revealed that this synergistic effect facilitated intramolecular charge separation and widened the range of light absorption, indicating accelerated charge transfer and suppressed recombination in TPCN. The optimized TPCN3 sample exhibited dramatically enhanced photocatalytic H2O2 production (1.74 mmol g−1 h−1), representing a 13.4-fold increase over pristine PCN. Additionally, the TPCN3 sample also exhibited significantly faster degradation kinetics than PCN counterpart toward various emerging contaminants. This work demonstrates a promising strategy for designing efficient metal-free photocatalysts for sustainable H2O2 production and environmental remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3583-6
Water scarcity and the increasing demand for clean water have driven the development of efficient solar desalination technologies. Interfacial solar steam generation (ISSG) is promising, yet its practical deployment is hindered by insufficient light harvesting and salt crystallization on photothermal surfaces. Here, we report a Janus hydrogel evaporator in which tubular Co9S8 nanocrystals are uniformly embedded in a polyvinyl alcohol (PVA) matrix with a concave pyramid pattern, creating a broadband light-trapping architecture (200–2500 nm) with 96% solar absorption. The top surface is further coated with hydrophobic zeolitic imidazolate framework-8 (ZIF-8), while the bottom retains intrinsic hydrogel hydrophilicity, establishing asymmetric wettability that sustains rapid water supply yet suppresses salt deposition. Under one-sun illumination (1 kW m−2), the Janus evaporator achieves an evaporation rate of 2.69 kg m−2 h−1 and a solar-to-vapor efficiency of 98.15%. Continuous operation in 3.5 wt% brine shows stable performance for 11 h without observable salt crystallization. This work offers an effective, durable pathway toward high-performance solar desalination and wastewater purification.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3700-7
Photocatalytic synthesis has been considered a promising technology for solar-to-chemicals conversion. Here, a series of novel photocatalysts was synthesized by decorating uranyl sites on imine-based covalent organic frameworks (i-COF) and proved functioning for the uniformly boosted H2O2 production by 1.6–10.1 folds compared with the bare i-COFs in a wide pH range from 2 to 11. Typically, an optimal H2O2 production rate of 1435.9 μmol g−1 h−1, i.e., 28.72 mmol g(U)−1 h−1, was realized over uranyl decorated TTa-COFs under visible light. Systematic investigations reveal that the universally and remarkably promoted performance is attributed to the outstanding electron-transfer ability, accelerated activation of molecular oxygen and favored formation of ·O2− and *OOH as the key intermediate by virtue of the decorated uranyl ions; thus the two-step single-electron oxygen reduction reaction (ORR) for H2O2 photo-generation is significantly facilitated. This work paves a new way for the uranyl-decorated COFs as a novel photocatalyst and provides in-depth insight to the reaction mechanism for photocatalytic H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3564-9
Sluggish water dissociation kinetics in the alkaline hydrogen evolution reaction (HER) hamper its practical production. Here, a heterojunction electrocatalyst featuring Ru-Ni(OH)2 interfaces on nickel foam (NF) with self-engineered built-in electric fields (BIEF) was synthesized via a simple in situ galvanic replacement reaction. The hierarchical Ru-Ni(OH)2/NF exhibits a record overpotential of 9.6 mV at 10 mA cm−2 for alkaline HER, surpassing most reported catalysts and commercial Pt/C. It also shows exceptional activity for hydrazine oxidation reaction (HzOR) at 100 mA cm−2 with a remarkably low potential of ca. 0.015 V vs. RHE. The assembled overall hydrazine splitting (OHzS) system integrating HER and HzOR requires a cell voltage of about 0.09 V to reach 50 mA cm−2, which is 1.637 V lower than the corresponding overall water splitting (OWS) device. Systematic analysis and calculation reveal that the BIEF induces redistribution of interfacial electrons for Ru, facilitating H2O dissociation and intermediate conversion, delivering ultra-high electrocatalytic performance. This work provides an avenue for design and preparation of electric field-mediated catalysts towards sustainable energy conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3848-7
Conventional heterogeneous photocatalysts often suffer from insufficient light absorption, rapid charge recombination, and a lack of specific reactive sites for efficient photocatalytic oxidation. To overcome these limitations, we propose a molecular polarization engineering approach utilizing structurally well-defined donor (D)-acceptor (A) covalent triazine frameworks (CTFs). The construction of dipole-induced built-in electric fields within the D-A-structured CTFs enables enhanced exciton dissociation and facilitates directional charge transfer. Specifically, the asymmetric A1-D-A2 moiety enhances molecular polarization in the dual-acceptor system CTF-TBT (A1-D-A2), enabling efficient charge separation through multiple electron-withdrawing units. This structural design promotes directional electron transfer toward the secondary acceptor (benzothiazole, A2), while simultaneously concentrating holes on the donor unit. Consequently, the A2 moiety acts as a site for efficient O2 activation via electron accumulation, whereas the highly oxidized donor unit provides strongly positive holes (h+) that facilitate substrate oxidation. Experimental and DFT calculation results confirm that CTF-TBT demonstrates highly enhanced photocatalytic oxidation performance, which can be attributed to its multi-channel charge separation mechanism and spatially separated redox-active sites. This study highlights the effectiveness of molecular dipole engineering in designing heterogeneous photocatalysts with controlled charge transfer pathways and improved redox capabilities. The proposed design principles provide a universal approach for promoting solar-driven chemical synthesis applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3841-6
Ni-rich layered oxide cathodes are pivotal candidates for next-generation lithium-ion batteries (LIBs) due to their high capacity and energy density. However, their susceptibility to structural deterioration and interfacial degradation during cycling causes substantial capacity fade, hindering commercialization. This work proposes a synergistic strategy of lattice doping and in situ surface coating to enhance structural integrity and interfacial stability of LiNi0.9Co0.05Mn0.05O2. La and Y dopants act as pillars to reinforce the layered structure, mitigating volume changes and expanding c-axis spacing to facilitate Li+ diffusion. Concurrently, La4NiLiO8 and LiYO2 coatings protect the cathode from H2O/CO2 corrosion and electrolyte attack, while their high lithium-ion conductivity promotes Li+ transport. The modified cathode delivers exceptional electrochemical metrics: high specific capacity of 207.3 mA h g−1, remarkable cycling stability with 97.6% retention after 100 cycles, superior rate capability of 152.1 mA h g−1 at 10.0 C, and enhanced thermal stability. This work establishes a paradigm for multi-dimensional stabilization of Ni-rich cathodes via synergistic bulk and interface engineering, providing insights for designing high-performance energy storage systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3539-5
MXene-based layered films are promising for electromagnetic interference (EMI) shielding, yet achieving highly ordered structures in scalable production remains challenging. Here, we report a facile centrifugal casting method for fabricating MXene/polyvinyl alcohol (MXene/PVA) films with highly oriented and compact layered structures. During centrifugal casting, the viscous fluid experiences strong shear and centrifugal forces along tangential and normal directions, respectively, inducing compact and oriented arrangement of MXene nanosheets. Consequently, the Herman's orientation factor increases from 0.681 to 0.794 as rotation rate rises from 0 to 4000 r/min. Accordingly, tensile strength and toughness improve from 55.2 to 191.1 MPa and from ~0.8 to 2.5 MJ/m³, respectively. The highly oriented and compact layered structure with ultrathin thickness (~8 μm) enables a high absolute electromagnetic shielding effectiveness (SSE/t) of 21029 dB cm²/g. Moreover, increased orientation reduces infrared emissivity to 0.248, endowing the film with excellent thermal camouflage capability. This work presents an effective strategy for constructing high-performance MXene-based layered films.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3547-7
Inorganic perovskite solar cells (IPSCs) have attracted significant attention due to their excellent light and thermal stability and potential in tandem applications. However, their efficiency and stability are often limited by residual lattice stress and defects at interfaces and within the bulk, causing severe nonradiative recombination. Here, we introduce a zero-dimensional supramolecular complex, (ETP)2SbCl5, as a dual-interface and bulk modifier to regulate CsPbI3 film growth. The modifier exhibits spatial segregation: ETP+ cations anchor at the buried interface, passivating defects on TiO2 and perovskite surfaces; Sb3+ and Cl− ions diffuse into the bulk during annealing, relieving residual stress; and Cl− accumulates on the top surface, passivating cation defects. Consequently, the modified CsPbI3 solar cell achieves a power conversion efficiency (PCE) of 21.71% and an open-circuit voltage (VOC) of 1.27 V, retaining 97.4% of initial efficiency after 500 h of maximum power point (MPP) tracking. This work demonstrates a synergistic strategy to simultaneously address interfacial and bulk defects, advancing high-performance and stable inorganic photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3676-3
Perovskite solar cells (PerSCs) have achieved remarkable efficiencies, yet their performance is limited by defect states and non-radiative recombination. Here, pyromellitic diimide (PD) is introduced as an additive to passivate bulk defects in perovskite films. PD forms hydrogen bonds with formamidinium (FA+) ions and coordinates with Pb2+ ions, effectively suppressing non-radiative recombination and reducing energy loss. The PD-treated perovskite films exhibit enhanced crystallinity and uniformity. Consequently, 1.55 eV PerSCs achieve a high open-circuit voltage (VOC) of 1.193 V and a power conversion efficiency (PCE) of 25.79%. Moreover, unencapsulated PD-treated devices retain 96% of their initial efficiency after 2000 h under nitrogen atmosphere, whereas control devices retain only 74%. Under ISOS-D-2I accelerated aging (65±5°C in N2), PD-treated devices show less than 5% PCE attenuation after 288 h, compared to ~30% for controls. This work provides a viable strategy for defect passivation in perovskite solar cells, enhancing both efficiency and stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3793-9
Organic solar cells (OSCs) require both a high donor/acceptor (D/A) interfacial area for efficient exciton dissociation and a vertically phase-separated morphology for efficient charge transport. Traditional bulk heterojunctions (BHJs) provide large interfacial areas but lack vertical phase separation, while quasi-planar heterojunctions (QPHJs) achieve vertical separation at the cost of reduced interfacial contact. Here, we introduce an in situ pore-forming strategy for polymer thin films. By incorporating an excess of additives as pore-forming agents into the donor layer, a nanoporous film with a fibrous nano-network is generated. Subsequent deposition of acceptor molecules fills these nanopores, creating a hybrid planar/bulk heterojunction (HP/BHJ) that synergizes the strengths of both architectures. This design enhances performance by: (1) increasing the D/A interfacial area via nanopores, forming a three-dimensional network that accelerates exciton dissociation; (2) promoting close molecular packing that minimizes carrier recombination and establishes low-defect charge transport channels; and (3) fostering vertical phase separation through layer-by-layer deposition. Binary OSCs fabricated with this strategy achieve a power conversion efficiency (PCE) of 20.0%, surpassing conventional BHJ and QPHJ devices by a significant margin. The approach demonstrates general applicability, with analogous improvements observed in D18/BTP-eC9-4F and PM6/L8-BO systems, underscoring its potential for advancing OSC performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3604-1
Piezoelectric materials convert mechanical energy into electrical signals, enabling applications in sensors, actuators, and energy harvesting. Inorganic ceramics like PZT and BTO exhibit excellent piezoelectric properties but are brittle, limiting their use in flexible electronics. This work presents a porous composite of PZT@carboxymethyl chitosan (CMCS) in thermoplastic polyurethane (TPU). The core-shell structure enhances interfacial compatibility, while the porous TPU skeleton facilitates stress transfer and amplification, allowing high piezoelectric content. The resulting PZT@CMCS/TPU devices achieve an output voltage of 53 V and current of 13 μA, an 11-fold improvement over conventional PZT composite films. This approach enables flexible piezoelectric devices with high performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3585-1
Semiconductor-based surface-enhanced Raman scattering (SERS) substrates have attracted significant attention due to their high uniformity, reproducibility, stability, and cost-effectiveness. However, the Raman enhancement in semiconductors primarily relies on the chemical mechanism (CM), which typically results in a lower enhancement capability compared to traditional noble metals. In this study, we developed a novel two-dimensional (2D) SERS substrate, Ag2Te nanosheets (NSs), synthesized through a simple one-step redox reaction utilizing 2D Te NSs as the template. The 2D Ag2Te NSs not only exhibit strong interfacial interactions with molecules, thereby supporting the CM, but also possess quasi-metallic properties with low resistivity (2.8 × 10−4 Ω cm) and high density of free electrons (4.15 × 10^22 cm−3), giving rise to a significant visible-region surface plasmon resonance (SPR) band and contributing to enormous electromagnetic mechanism (EM). By synergizing CM and EM, the 2D Ag2Te NSs SERS substrate achieved an ultra-low limit of detection (LOD) of 10−10 M with an enhancement factor (EF) of 2.6 × 10^7 for methylene blue (MB), outperforming most semiconductors, even rivaling noble metals. The quasi-metallic properties of 2D Ag2Te NSs also benefit their sensitivity to multiple molecules. The accuracy and reliability were demonstrated in real-sample detections with recoveries of 91.5%–108.3% for various target molecules. These excellent performances, combined with remarkable cost-effectiveness, demonstrate the potential of 2D Ag2Te NSs as a practical SERS substrate with broad applicability. Furthermore, the inherent structural simplicity of these nanosheets creates significant opportunities for further sophisticated nanostructural engineering to advance the SERS performance in the future.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3645-3
Postoperative abdominal adhesion, a complication with morbidity exceeding 90%, imposes severe clinical and economic burdens. Existing bioadhesive barriers often exhibit unreliable adhesion to the slippery abdominal wall, risk mispositioning, and neglect frictional stimuli and inflammation. Inspired by the lubricated peritoneum, we developed a programmable adhesive dual-layer Janus patch (DJP) barrier integrating a lubricated layer and an adhesive matrix. DJP achieves rapid, noncovalent interfacial adhesion, subsequently enhanced 2.81-fold via covalent interactions, enabling repositioning within a short time window to improve surgical fault tolerance. The micron-scale poly(sulfobetaine methacrylamide) brush on the DJP surface provides hydration lubrication with a low coefficient of friction (0.06), mimicking peritoneal lubrication and reducing frictional damage to injured tissue. The catechol-containing copolymer confers antioxidative and anti-inflammatory properties, confirmed in vitro. In a rat model, DJP adhering to the injured site significantly reduced collagen deposition between the abdominal wall and cecum, preventing adhesion and promoting tissue healing compared to commercial barriers. This work provides a guiding reference for developing antiadhesive biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3556-6
Photon avalanche (PA) is a nonlinear optical phenomenon characterized by steep upconversion emission growth with excitation power. Since the first demonstration of PA on nanoscale and at room temperature in 2021, PA luminescence of lanthanides has attracted considerable attention in nano- and bio-photonics. However, PA nanoparticles (NPs) remain restricted to a limited range of material systems and lanthanide ions, facing challenges including inadequate nonlinearity (N), high excitation threshold (P_th), and deficient chromaticity. In a recent publication in Nature Photonics, Dong and co-workers reported a new class of PA nanosystem based on Ho3+-doped fluoride NPs, which afforded tunable PA chromaticity for multicolor sub-diffraction imaging. Unlike conventional PA systems reliant on a single reservoir level, this study introduced a novel 'parallel PA' (PPA) mechanism leveraging the dual long-lived intermediate reservoir levels (5I7 and 5I6) of Ho3+, facilitating simultaneous operation of two PA loops to generate multicolor emissions. Under 965 nm continuous-wave excitation, the PPA of Ho3+ produced simultaneous red-green-blue emissions with large N (>20). Differential rate equation modelling identified all PA signatures, including clear P_th, S-shaped curves, extremely high sigma_ESA/sigma_GSA ratio of ~75000, and volcano-shaped rise time. The engineered NaGdF4:10%Ho@NaYF4 core/shell PA NPs (~19.6 nm) exhibited remarkably high N of 17–22 with mild P_th of ~22 kW cm−2 and fast response time of 343–371 ms. By screening host lattices and introducing co-dopants, PA chromaticity was precisely tailored, demonstrating unparalleled emission tunability for multicolor super-resolution imaging.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61075-X
The proliferation of electronic devices has intensified electromagnetic radiation pollution, necessitating advanced microwave absorption materials. This study presents the electrospinning fabrication of FeNiCo/carbon nanofiber (FeNiCo/CNF) composites with exceptional microwave absorption properties. The FeNiCo/CNFs achieved a minimum reflection loss (RLmin) of −55.5 dB at 14.24 GHz with an ultrathin matching thickness of only 1.6 mm. Microstructural analysis and electromagnetic parameter testing revealed that the superior absorption stems from the synergistic interaction between the carbon nanofiber network and FeNiCo alloy nanoparticles, which promotes multiple reflections and efficient energy dissipation. The precise control of coercivity and permeability via systematic modulation of magnetic metal composition enabled enhanced impedance matching and optimized magnetic-dielectric synergy. Furthermore, radar cross-section (RCS) simulations confirmed the material's capability to significantly reduce RCS values across a wide angular range, validating its potential for stealth technology applications. This work introduces a cost-effective and sustainable approach for developing ultralight, high-performance microwave absorbers, addressing the limitations of conventional materials such as high density and poor stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3694-3
Lithium metal anodes (LMAs) are among the most promising candidates for next-generation batteries with high energy density. However, their practical application is hindered by persistent challenges such as dendritic lithium growth, unstable solid electrolyte interphases (SEI), and poor Coulombic efficiency. Surface coating has emerged as a viable solution to address these limitations. In particular, atomic and molecular layer deposition (ALD/MLD) techniques offer unparalleled control over the fabrication of ultrathin, conformal coatings, making them especially suitable for stabilizing LMA interfaces. This review comprehensively summarizes recent progress in applying ALD and MLD methodologies to construct durable artificial interphases on LMAs. We discuss the underlying mechanisms through which these coatings inhibit dendrite formation, improve interfacial integrity, and facilitate uniform lithium-ion transport. The roles of inorganic ALD coatings, organic MLD coatings, and their organic–inorganic hybrids are systematically examined, with a focus on their chemical composition, deposition behavior, and electrochemical characteristics. Moreover, we highlight the enhanced performance achieved through the integration of ALD/MLD-engineered interfaces in full-cell systems. The review concludes with a discussion of current challenges and potential research avenues aimed at advancing the rational development of effective LMA protection strategies. Overall, this work offers valuable insights into the role of interfacial engineering via ALD and MLD in enabling the practical deployment of lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3648-2
Transient energy storage devices represent an emerging class of biodegradable power systems that provide temporary energy for implantable medical electronics before safely degrading in vivo. From early transient primary batteries to contemporary rechargeable batteries integrated with wireless charging systems, these devices have evolved to enable stable prolonged power supply. Through rational transient design and structural engineering, they achieve desirable electrochemical performance, tunable degradation rates, and mechanical compatibility with soft, irregular, and dynamic biological tissues. This work provides a critical review of state-of-the-art transient energy storage devices, including transient primary batteries, transient secondary batteries, and transient supercapacitors, with emphasis on their electrodes, electrolytes, encapsulation materials, fabrication processes, and applications. We critically analyze material selection strategies, transient design principles, and architecture design for various transient batteries and capacitors. Finally, we discuss existing challenges and outline future directions to guide the clinical translation of biodegradable power solutions for biomedical implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3628-3
The solution aggregation structures of conjugated polymers are pivotal in determining their film morphology and optoelectronic properties, yet the relationship between solution aggregation and device performance remains elusive in organic photodiode (OPD) systems. Herein, we introduce the first examination of solution aggregation structures of all-polymer OPD blends, with a focus on how molecular entanglement modulates aggregation behavior and subsequent photodiode performance of low-cost poly(3-pentylthiophene). Using small-angle neutron scattering and freeze-dried imaging, we provide a comprehensive analysis of the solution-state aggregation behavior of poly(3-pentylthiophene) and its evolution in the blend, revealing profound impacts on film morphology and device performance. With finely optimized aggregation, the resulting all-polymer OPD achieves a record-high specific detectivity of ~4×10^13 Jones at zero bias, outperforming all bulk heterojunction (BHJ)-type self-powered OPDs reported to date. This device also demonstrates remarkable thermal stability, with negligible performance degradation after over 800 h of thermal annealing at 85 °C. Furthermore, the self-powered OPD exhibits excellent performance across a broad spectral range, enabling its application in both water quality monitoring and biosensing. This work offers new insights into the solution aggregation behavior of conjugated polymers in OPDs and highlights the importance of resolving solution aggregation in optimizing device function.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3623-y
Organic light-emitting diodes (OLEDs) are an advanced technology for full-color displays, yet the low efficiency of blue OLEDs remains a critical bottleneck. Here, we report a new strategy to design robust Pt(II) emitters with enhanced molecular rigidity and increased locally excited character. The resulting Pt(II) emitter exhibits an extremely narrow emission spectrum peaking at 458.6 nm with a full-width at half-maximum (FWHM) of 16.0 nm and a small Huang-Rhys factor of 0.278, together with a high photoluminescence quantum efficiency of 95%. When doped into an OLED, the device emits at 464 nm with high color purity (FWHM = 19 nm) and achieves high external quantum efficiencies (EQEs) of 32.6%, 29.4%, and 26.9% at luminances of 123, 1000, and 5000 cd/m2, respectively. Notably, the device attains a record-high maximum brightness of 84,895 cd/m2 among reported deep-blue OLEDs with Commission Internationale de l'Éclairage (CIE) y-coordinate < 0.15. This work demonstrates one of the highest-performing deep-blue OLEDs reported to date, addressing the dual challenges of efficiency and brightness in this spectral region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3642-4
High-density glass scintillators are promising alternatives to crystals for next-generation radiation detection due to their low cost, excellent physical and chemical stability, and processability. In this study, a series of Ce3+-activated gadolinium gallium borosilicate (GGBS x) glasses were synthesized via vacuum melt-quenching. With increasing Gd2O3 content, glass density increased from 5.86 to 6.05 g/cm3, and molar volume from 36.43 to 39.79 cm3/mol. Extended X-ray absorption fine structure (EXAFS) analysis revealed that in GGBS 1 glass, Ce3+ exclusively adopts a hexahedral [CeO6] configuration, while Gd3+ exhibits both hexahedral and octahedral coordination with a bond length of 2.35±0.1 Å and Debye-Waller factor σ2 of 0.0122±0.0015 Å2. As Gd2O3 content increased, shallow trap depth rose from 0.804 to 0.858 eV, while deep trap depth first increased from 0.948 to 1.434 eV then decreased to 1.010 eV. GGBS 1 glass exhibited high transmittance (~80%) in the visible range and a photoluminescence quantum yield of 78.4%. Under X-ray irradiation, its X-ray excited luminescence intensity reached 128.5% of that of Bi4Ge3O12 (BGO) crystal, with a spatial resolution of 29.1 lp/mm, approaching the highest reported for glass scintillators. Under γ-ray excitation, it achieved a light yield of 1058 photons/MeV and an energy resolution of 23.7% at 662 keV. These results indicate that GGBS 1 glass scintillator warrants further development for applications in X-ray imaging and γ-ray spectroscopy.