SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4435-9
Organic room-temperature phosphorescent (RTP) materials exhibit large Stokes shifts, high signal-to-noise ratios, and long emission lifetimes, positioning them as promising candidates for advanced anti-counterfeiting, bioimaging, sensing, and display technologies. Despite significant progress in molecular design—including radical-based systems, crystal engineering, host-guest doping, polymer matrix confinement, and supramolecular assembly—the integration of these materials with 3D printing remains in its infancy. This review critically examines the design strategies and research advances in 3D-printed organic RTP materials, focusing on the fundamental photophysical processes of intersystem crossing and suppression of non-radiative transitions. We analyze how printing parameters, matrix rheology, and layer-by-layer deposition influence phosphorescence quantum yields and lifetimes. Key challenges such as oxygen quenching, thermal degradation during extrusion, and poor interlayer adhesion are discussed with quantitative benchmarks. The review highlights that current 3D-printed RTP systems achieve lifetimes up to 1.2 s and quantum yields of 12% under ambient conditions, but scalability beyond 100 cm² remains limited by nozzle clogging and slow curing kinetics. By mapping material formulation to printability, we identify operational windows for extrusion-based and vat photopolymerization techniques. This work provides a roadmap for engineers to transition RTP materials from laboratory-scale demonstrations to industrial fabrication of complex 3D architectures with persistent luminescence.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4433-5
Negative thermal expansion (NTE) and zero thermal expansion (ZTE) materials are technologically relevant for precision engineering, yet their practical deployment is constrained by narrow operating temperature windows. This study introduces an entropy-designing strategy to regulate the thermal expansion behavior in the AⅠBⅡCⅢMo3O12 system, specifically K0.4(Mg0.25Mn0.25Co0.25Ni0.25)0.4Sc1.6Mo3O12 (CE0.4MO) and related CExMO compositions (x = 0.4, 0.6, 0.8, 1.0). By tuning configurational entropy, the operating temperature windows for both NTE and ZTE are significantly broadened, with the ZTE region shifting to higher temperatures. Among single-phase compositions, CE0.4MO exhibits the lowest configurational entropy and demonstrates NTE from 100 to 830 K and ZTE up to 1100 K, surpassing most reported ZTE materials. Systematic analyses of structural evolution, lattice dynamics, and electronic structure reveal that reduced configurational entropy suppresses structural evolution, directly correlating with decreased structural flexibility. Higher atomic displacement parameters (ADPs) of oxygen in CE1.0MO provide experimental evidence for enhanced flexibility. Raman spectroscopy shows that the full width at half maximum (FWHM) of peaks in the 750–900 cm-1 range positively correlates with configurational entropy, indicating reduced lattice disorder, while modes within 750–1050 cm-1 blue-shift as entropy decreases, confirming lattice stiffening. Electron localization function (ELF) and charge density analyses indicate that Mg/Mn/Co/Ni/Sc–O bonds are ionic, with ionicity weakening as configurational entropy decreases, thereby enhancing constraints on atomic vibrations and reducing structural flexibility. This work establishes a theoretical foundation for designing thermal expansion materials with wide operating temperature ranges.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4343-7
Piezoelectric materials interconvert mechanical and electrical energy, but piezoceramics are brittle while PVDF-based ferroelectric polymers exhibit low piezoelectric coefficients (d33 ≈ -30 pC N-1). Chemical modification via morphotropic phase boundary (MPB) engineering has raised d33 in P(VDF-TrFE) to -63.5 pC N-1, and to -69 pC N-1 with stretching, but intrinsic piezoelectricity in relaxor terpolymers remains limited. Here, relaxor ferroelectric P(VDF-TrFE-CFE) with varying C=C double bond (DB) content is synthesized via dehydrochlorination. Structural and electrical characterization reveals that increasing DB content stabilizes long-range ferroelectric order while suppressing short-range relaxor characteristics, forming a trans/helix phase boundary. At a critical DB content of 2.0 mol%, a markedly enhanced intrinsic d33 of -129.0 pC N-1 is achieved, outperforming previous MPB approaches. This finding addresses the fundamental bottleneck of low piezoelectric response in flexible ferroelectric polymers and provides a viable route for high-performance wearable electromechanical devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4362-y
The commercial viability of zinc-air batteries (ZABs) is constrained by the sluggish kinetics of the oxygen reduction reaction (ORR), which necessitates robust, cost-effective catalysts. While cobalt-based single-atom catalysts (Co SACs) exhibit superior selectivity and stability relative to Fe-N-C counterparts, their intrinsic ORR activity remains limited by scaling relations among intermediates. This study alleviates these constraints by precisely engineering the coordination symmetry of Co SACs. Through a mild annealing strategy, boron was incorporated into the first and second coordination shells of Co centers, creating an asymmetric Co-N3B-O local environment. The first-shell B/O coordination modulates the electronic structure of the Co center, while hydrogen bonding between *OOH and the coordinated O atom stabilizes the key intermediate, synergistically enhancing ORR activity. The optimized Co-BCN-950 catalyst delivers a peak power density of 216 mW cm-2 in ZABs, a 43% enhancement over commercial Pt/C (151 mW cm-2), alongside an open-circuit voltage of 1.43 V and a specific capacity of 790 mAh g-1. These findings establish a paradigm for tailoring the local coordination of SACs, enabling next-generation high-stability energy storage systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4498-7
Two-dimensional porphyrin-based hypercrosslinked polymers (TPP-HCPs) were synthesized via room-temperature interfacial polymerization using 5,10,15,20-tetraphenylporphyrin and 1,3,5-trioxane. The resulting TPP-HCPs exhibited a BET surface area of 548 m2 g-1 and a CO2 uptake of 7.97 wt% at 1 bar and 298 K. CuO/TPP-HCPs nanospheres were fabricated by thermal conversion of Cu(NO3)2·3H2O in DMF at 135 °C, using TPP-HCPs as dynamic templates. This in-situ strategy generated CuO nanoparticles within the conjugated porous matrix, facilitating electron transfer and enhancing CO2 access to catalytic centers. In CO2 electroreduction, the composite achieved a total gas Faradaic efficiency exceeding 90% at ~500 mA cm-2 (-1.4 V vs. RHE), with 40.9% for C2H4, 8.2% for CH4, 31.9% for CO, and 12.3% for H2. The catalyst maintained stability over 24 h in an H-cell. These results demonstrate that 2D conjugated polymer-templated catalysts can sustain high-rate CO2 conversion to value-added products, offering a viable route for industrial CO2 utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4448-y
Zero-dimensional (0D) hybrid metal halides are promising for optoelectronic displays, bioimaging, and anti-counterfeiting due to strong exciton localization and self-trapped exciton (STE) emission. However, low-toxicity, biocompatible zinc halides with blue emission remain scarce, hindered by structural isolation of [ZnBr4]2− tetrahedra, electron-phonon coupling, lattice distortion, and nonradiative relaxation. Here, we synthesize MPAZnBr4 (MPA = N-(3-aminopropyl) morpholine), a 0D zinc bromide halide. Single-crystal X-ray diffraction reveals a monoclinic P21/c space group with a = 6.65190 Å, b = 16.11210 Å, c = 13.79640 Å, β = 94.5700°, Z = 4, and a calculated density of 2.394 g/cm3. The isolated [ZnBr4]2− tetrahedra are hydrogen-bonded to MPA cations, with the shortest Br···Br contact of 4.76 Å indicating weak inter-cluster electronic coupling. Upon photoexcitation, MPAZnBr4 exhibits bright blue emission centered at 450 nm with a full width at half maximum of 135 nm. Wavelength-dependent emission mapping confirms a single radiative pathway, while temperature-dependent photoluminescence identifies triplet STE emission with a thermal quenching activation energy of 55 meV. The extensive hydrogen-bonding network imparts remarkable structural stability, showing negligible photoluminescence decay under prolonged excitation or storage. As a proof-of-concept, we demonstrate switchable and rewritable information encryption and decryption, enabling complex luminescent patterns. These findings provide a strategy for constructing highly stable, low-toxicity blue-emissive Zn-based 0D metal halides for advanced photonic and information-security applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4272-3
Ruthenium (Ru)-based alloys are promising alternatives to commercial Pt/C catalysts for the hydrogen evolution reaction (HER) owing to their low cost and favorable hydrogen adsorption properties. However, the sluggish water dissociation on Ru catalysts remains a major kinetic bottleneck in alkaline solutions. Herein, we report a rare earth (RE) dilute alloy strategy by incorporating a trace amount of cerium (Ce, ~1 at%) into a RuCu alloy to promote interfacial water activation. The oxophilic Ce sites strengthen H2O adsorption and reduce the energy barrier for water dissociation, thereby accelerating the Volmer step during alkaline hydrogen evolution. Consequently, the RuCuCe catalyst delivers 10 mA cm−2 at an overpotential of only 18 mV in 1.0 M KOH and maintains stable operation for over 100 h at 500 mA cm−2 in a membrane electrode assembly. In situ electrochemical impedance spectroscopy and pH-dependent measurements verify the facilitated Volmer process induced by Ce incorporation. Temperature-dependent analysis further shows that the apparent activation energy decreases from 47.4 kJ mol−1 for RuCu to 26.4 kJ mol−1 for RuCuCe, consistent with enhanced water dissociation kinetics. This work establishes RE dilute metal alloys as an effective platform for boosting the intrinsic activity of Ru-based alloy catalysts, in which RE incorporation promotes water dissociation while inducing charge redistribution in the alloy matrix.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4381-5
Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4201-0
Open fracture fixation faces dual critical challenges: bacterial infection and impaired bone healing. This study presents a rationally designed biomacromolecular network coating (Ti-GOED) on titanium alloy bone plates to simultaneously address these issues. The coating integrates antimicrobial and osteogenic components, achieving an optimal balance between antibacterial efficacy and biocompatibility. In vitro assays demonstrated that Ti-GOED eliminates over 99% of common pathogenic bacteria by inhibiting peptidoglycan synthesis, disrupting bacterial cell wall formation, compromising membrane integrity, and leading to intracellular DNA leakage and bacterial death. Concurrently, Ti-GOED enhances the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) via activation of the PI3K-Akt and HIF-1 signaling pathways. In vivo animal experiments confirmed strong antibacterial and osteogenic properties. This work provides a strategy for developing antibacterial coatings on medical devices, with significant potential for preventing and treating infections post-fracture fixation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4292-4
The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4180-9
Developing highly active and stable electrocatalysts based on the lattice oxygen mechanism (LOM) for the oxygen evolution reaction (OER) represents a significant challenge in water splitting. Herein, we successfully introduce oxygen vacancies (Ov) into high-entropy MnFeCoNiCu layered double hydroxides (HE-LDHs) via a solution chemical reduction method utilizing a defect engineering strategy. By precisely tuning the concentration of oxygen vacancies, we effectively activate the lattice oxygen within the HE-LDHs. The optimized Ov-rich high-entropy LDHs (Ov-HE-LDHs) exhibit excellent OER catalytic performance, achieving a current density of 10 mA cm−2 with a remarkably low overpotential of only 210 mV in 1.0 M KOH electrolyte, which is substantially superior to pristine HE-LDHs (315 mV) and commercial IrO2 (330 mV). Furthermore, the catalyst demonstrates outstanding long-term stability, capable of stable operation for 500 h at a high current density of approximately 200 mA cm−2. Advanced X-ray absorption fine structure analysis elucidates the lower metal valence states, indicating the existence of oxygen vacancies, while isotope labeling experiments and in-situ electrochemical Raman spectroscopy strongly confirm the successful activation of the LOM pathway. Density functional theory calculations further validate that the shift in the OER mechanism towards LOM and the resulting reduction in the reaction energy barrier are the fundamental reasons for the catalyst’s enhanced intrinsic activity. This work proposes a novel strategy for activating lattice oxygen in high-entropy LDHs through defect engineering, offering new insights and experimental guidance for the design and development of highly efficient and stable high-entropy OER electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4200-0
Self-powered broadband photodetectors are pivotal for next-generation intelligent healthcare. Solution-processed mercury sulfide (HgS) is an attractive near-infrared absorber but is limited by interfacial instability, high defects, and sluggish response. Inspired by sulfur-mediated adhesion in Alhagi sparsifolia, a bioinspired interfacial engineering strategy employs an antimony sulfide (Sb2S3) interlayer to construct a bidirectional chemical bonding network. The Sb2S3 interlayer simultaneously forms Sb–O bonds with fluorine-doped tin oxide (FTO) substrates and Sb–S/Hg–S bonds with the HgS layer, thereby reinforcing interfacial adhesion, passivating coordination-unsaturated defect states, and establishing a type-II heterojunction with a strong built-in electric field. The resulting Sb2S3/HgS photodetector exhibits self-powered operation, broadband sensitivity spanning the visible to near-infrared region (642–1550 nm), an ultrafast response time of 2.47 ms, a detectivity up to 1.7 × 10^11 Jones, and retaining nearly constant photocurrent over 5000 continuous on-off switching cycles as well as prolonged air exposure. Beyond device-level performance, we demonstrate its utility in intelligent healthcare scenarios, including machine-learning-assisted liquid drug identification, binary-coded optical wireless communication, and high-fidelity photoplethysmography monitoring. This work establishes biomimetic bidirectional bonding as a generalizable paradigm for stabilizing solution-processed chalcogenide optoelectronics and accelerates the integration of self-powered broadband photodetectors into intelligent healthcare systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4134-6
Oral leukoplakia (OLK) is a prevalent premalignant lesion with malignant transformation risk. Current adhesive hydrogels lack lesion-specific adhesion and precision therapy. We synthesized DNA hydrogels via co-crosslinking of thiolated gelatin and thiolated oligonucleotide through disulfide bonds, incorporating Mn2+ and chlorin e6 (Ce6) via thiol-metal coordination and physical entrapment. Low-frequency ultrasound (LFUS) anchored complementary oligonucleotides onto the lesion surface, enabling site-specific bioadhesion through base pairing. Under high-frequency ultrasound (HFUS), Ce6 generated reactive oxygen species, triggering mitochondrial DNA (mtDNA) release in hyperproliferative epithelial cells. Concurrent HFUS accelerated Mn2+ release, potentiating cGAS recognition of cytosolic mtDNA and activating the cGAS-STING pathway. This induced dendritic cell maturation, priming naïve T cells into cytotoxic T lymphocytes, reversing the immunosuppressive microenvironment. The modality induced immunological memory, restraining OLK recurrence and impeding malignant transformation. This study introduces the first DNA-directed hydrogel bioadhesion strategy and proposes unprecedented cGAS-STING pathway-associated immunotherapy against OLK.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4217-y
Rational design and construction of effective photocatalysts is a promising way for green and sustainable chemistry, but still a great challenge. Herein, taking triphenylamine-containing aldehydes as reactants, two covalent triazine frameworks (CTFs), tris(4-formylphenyl)amine (TPA)-CTF and tris(4-formylbiphenyl)amine (TBPA)-CTF, were rationally constructed. The strong electron donor property of the triphenylamine moieties derived from the initial reactants and the strong electron acceptor nature of the in-situ formed built-in triazine rings in CTFs endowed these robust triphenylamine-based CTFs with donor-acceptor (D-A) or donor-π-acceptor (D-π-A) structure features. Photocatalytic experiments revealed that, compared with the controlled phenyl analogue CTF, 1,3,5-tri(p-formylphenyl)benzene (TFPB)-CTF, both of the triphenylamine-based CTFs exhibited superior photocatalytic activity not only in photocatalytic hydrogen peroxide generation, but also in photocatalytic aerobic oxidations of diverse organic substrates. Theoretical studies further confirmed that their enhanced photocatalytic performance should be attributed to their unique D-A or D-π-A features in the constructed triphenylamine-based CTFs. This work successfully demonstrated that rational selection of reactants containing electron donor moieties to construct CTFs should be a reliable way for the construction of effective photocatalysts for photocatalytic oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3536-5
Nanomaterial-based optical biomedicine and devices have attracted significant attention for tumor diagnosis and treatment, yet their application in tumor ablation is often hindered by limited functional integration and concerns over excessive radiation exposure. In this study, we address these challenges by developing a multifunctional fiber probe based on lanthanide-doped nanoparticles, featuring decoupled modules for localized heating and optical thermometry. This design enables synergistic therapy under near-infrared (NIR) laser irradiation. Beyond achieving precise photothermal ablation and real-time temperature monitoring, we uncovered a unique phenomenon: the generation of reactive oxygen species (ROS) by these nanoparticles under NIR laser excitation, even in the absence of traditional photosensitizers. Through a combination of experimental and computational approaches, we elucidated the physical mechanisms underlying ROS generation in wide-bandgap lanthanide nanoparticles. Leveraging these insights, we constructed an all-optical fiber system capable of simultaneous precise thermal control and photodynamic therapy. Our findings offer valuable guidance for the development of advanced optical nanomaterials and devices for effective tumor treatment, both in vivo and in vitro.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3848-7
Conventional heterogeneous photocatalysts often suffer from insufficient light absorption, rapid charge recombination, and a lack of specific reactive sites for efficient photocatalytic oxidation. To overcome these limitations, we propose a molecular polarization engineering approach utilizing structurally well-defined donor (D)-acceptor (A) covalent triazine frameworks (CTFs). The construction of dipole-induced built-in electric fields within the D-A-structured CTFs enables enhanced exciton dissociation and facilitates directional charge transfer. Specifically, the asymmetric A1-D-A2 moiety enhances molecular polarization in the dual-acceptor system CTF-TBT (A1-D-A2), enabling efficient charge separation through multiple electron-withdrawing units. This structural design promotes directional electron transfer toward the secondary acceptor (benzothiazole, A2), while simultaneously concentrating holes on the donor unit. Consequently, the A2 moiety acts as a site for efficient O2 activation via electron accumulation, whereas the highly oxidized donor unit provides strongly positive holes (h+) that facilitate substrate oxidation. Experimental and DFT calculation results confirm that CTF-TBT demonstrates highly enhanced photocatalytic oxidation performance, which can be attributed to its multi-channel charge separation mechanism and spatially separated redox-active sites. This study highlights the effectiveness of molecular dipole engineering in designing heterogeneous photocatalysts with controlled charge transfer pathways and improved redox capabilities. The proposed design principles provide a universal approach for promoting solar-driven chemical synthesis applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3600-1
Two-dimensional planar pentagonal crystals, long pursued for their geometrically frustrated lattice configurations and emergent quantum phenomena, have remained challenging to realize due to the intrinsic incompatibility of regular pentagons with Euclidean tiling. Here, we unveil 37 dynamically stable binary planar pentagonal monolayers through high-throughput computational screening of 1470 stoichiometric candidates. These materials exhibit room-temperature magnetism, including ferromagnetic (Curie temperature up to 521 K), antiferromagnetic (Néel temperature up to 761 K), and altermagnetic (Néel temperature = 984 K) ground states, alongside unprecedented electronic states: Dirac semimetals, Dirac half-metal, nodal-loop semimetal, nodal-loop half-metal, and altermagnetic semiconductors (Mn4N2) with giant spin splitting (0.78 eV). The latter achieves pure spin-polarized transport windows (−0.04 to 0.36 eV) and strain-tunable valley splitting (18.2 meV under 4% uniaxial strain). Intrinsic type-II multiferroicity emerges in Fe4C2 and Mn4C2, featuring in-plane electric polarization (1.4 and 1.6 pC/m), ferroelasticity (0.8% and 1.2% reversible strain), and reversal chirality. Topological band analysis identifies chiral edge states in Dirac semimetal pentagons, alongside a magnetic topological insulator with Chern number |C| = 2 in Mo2S4 and W2Te4. Temperature-driven structural transitions in Os2S4 and Tc2S4 from pentagonal to Lieb lattices accompany topological state switching and metal-to-semiconductor transitions. This work establishes pentagonal lattices as a platform for symmetry-driven multifunctionality, bridging geometric frustration with applications in spintronics, nanoelectronics, and quantum devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3553-7
Gesture interaction has emerged as a highly effective interface for intelligent human-computer interaction, attributed to its intuitive interaction modality and multi-dimensional control capabilities. However, traditional gesture interaction devices often depend on predefined encoding rules, which substantially limit interaction efficiency and degrade user experience. This study introduces an innovative intelligent finger ring interaction system based on a triboelectric nanogenerator utilizing PDMS/SrTiO3 composite thin film (PS-TENG). The system maps freehand writing gestures directly to textual information input, thereby eliminating the need for complex gesture encoding schemes and offering a user-friendly, low-learning-curve input method. By integrating a deep learning model, the system achieves recognition accuracies of 98.21% for English letters, 96.87% for Arabic numerals, and 96.44% for Chinese characters. Furthermore, it supports secure and encrypted data transmission and enables wireless interaction for gaming control. These findings indicate that the intelligent finger ring interaction system possesses significant potential for practical applications in information input and wireless control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3432-8
This correction addresses an error in the labeling of author affiliations in the original publication (Sci China Mater, 2025, 68: 1561, DOI: 10.1007/s40843-024-3290-9). The corrected affiliations are as follows: Fuxia Huang, Feng Wang, Ya Liu, and Liejin Guo are affiliated with the International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Yifei Liu is affiliated with the School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. The correction was made upon the request of the authors and with approval from the respective institutions. The original article focused on crystal defects engineering of BiOI to enhance photocatalytic CO2 reduction to C2 products, a critical area for sustainable fuel synthesis. This correction ensures accurate attribution and institutional recognition, which is essential for research integrity and reproducibility. No changes were made to the scientific content or conclusions of the original study.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3706-3
Aprotic lithium-oxygen (Li-O2) batteries are severely limited by slow cathode reaction kinetics and large polarization. Herein, we design and prepare a Mott-Schottky catalyst by uniformly embedding ultrafine Ru nanoparticles on nitrogen-doped carbon (Ru@NC) nanoflakes to accelerate oxygen redox kinetics of Li-O2 batteries. The Mott-Schottky effect of Ru@NC drives spontaneous electron rearrangement in the NC matrix and induces a strong built-in electric field at heterointerfaces, which accelerates the activation and conversion of oxygen intermediates. The obtained Ru@NC possesses rich Mott-Schottky heterointerfaces and defective carbon structures, which provide extensive adsorption and nucleation sites. More importantly, Ru@NC manifests moderate affinity for the intermediate LiO2, inducing formation of unique nanosheet-like Li2O2 with low Li2O2/cathode interfacial impedance, which further enhances oxidation kinetics. These enable the Li-O2 battery with Ru@NC to deliver a remarkably reduced polarization of 0.89 V, superior rate performance, and prolonged lifespan of over 200 cycles. This work will provide valuable guidelines for engineering advanced electrocatalysts for high-performance Li-O2 batteries and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3682-6
Metal single-atoms with optimized coordination structure on highly accessible substrate can maximize the metal utilization efficiency along with enhancing catalytic activities. Herein, axial nitrogen-coordinated Fe-N5 sites on N-doped carbon (denoted as FeN5@N-C) hollow microplates are fabricated via a unique Fe3+-chelated polydopamine assisted hollowing strategy using ZIF-L microplates as multifunctional templates. Due to the powerful chelating and adhesive ability of polydopamine, this hollow-carbon strategy can be extended to fabricate single-atom Fe-N-C hollow structures with different shapes and encapsulate other transition-metal single atoms (Ni, Co, Mn, and Cu) into the N-doped carbon hollow microplates. The FeN5@N-C hollow microplates exhibit outstanding oxygen reduction reaction (ORR) capability with an impressive half-wave potential of 0.93 V vs. reversible hydrogen electrode and high stability, which can serve as air-cathode catalysts for high-performance Zn-air batteries with high peak power density of 225.3 mW cm−2 and stable cyclability of up to 400 h. Comprehensive analysis and theoretical calculations elucidate that axial nitrogen coordination in Fe-N5 catalytic sites, unlike the planar Fe-N4 configuration, can compete well with the bonding of OH* through additional 3d-2p orbital hybridization, thereby giving moderate bonding strength to enhance the ORR activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3770-9
Intramolecular through-space charge-transfer (TSCT)-enabled thermally activated delayed fluorescence (TADF) emitters have shown exceptional potential for advancing organic light-emitting diode (OLED) technologies, owing to their efficient utilization of triplet excitons and optimized photophysical properties. To date, the intrinsic correlation among molecular geometries, intramolecular non-covalent interactions, and photophysical properties in TSCT-TADF emitters remains unconfirmed, and this study theoretically clarifies this critical correlation. Specifically, through integrating molecular engineering, screening strategies, first-principles calculations, energy decomposition analysis, and statistical modeling, we systematically investigated 24 experimentally reported TADF molecules, and 54 newly designed structures in both solution and thin-film environments. We establish a clear geometric criterion for high-efficiency TSCT-TADF emitters: donor-acceptor (D-A) dihedral angles below 25° and interfragment distances within 4 Å—conditions validated by both theoretical predictions and experimental evidence. Based on this insight, we designed two novel molecular libraries with benzene- or carbazole-derivative bridges, using O-bridged triphenylamine (DPXZ) as the donor and quinolino[3,2,1-de]acridine-5,9-dione (QAO) as the acceptor. Our calculations confirm that sub-25° D-A dihedral angles correlate with exceptional delayed fluorescence efficiency, with predictions reaching up to 96% and an average of 70% for the new thin film systems. This study provides a rational design strategy for high-performance TSCT-TADF emitters, significantly advancing the molecular-level understanding of through-space interactions and accelerating the discovery of tailored, efficient OLED materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3757-2
β-Ga2O3 is a promising candidate for solar-blind ultraviolet photodetection owing to its suitable bandgap of approximately 4.9 eV, excellent photoresponse characteristics, and high stability. However, the lack of a sufficient driving force within the material leads to extensive bulk charge recombination, limiting its photocurrent and thus posing significant challenges in designing high-performance Ga2O3-based photodetection. In this study, we propose a gradient doping strategy to achieve a Sn-doping concentration gradient along the β-Ga2O3 film thickness. By combining sol–gel synthesis with rapid thermal annealing, a spatially graded band structure with a full-space built-in electric field is constructed, which increases the width of band bending over a large region and is crucial for significantly enhancing carrier separation and transport in the bulk. The resulting gradient Sn-doped β-Ga2O3 enables exceptional photoelectric performance without an external bias under 254 nm irradiation, including a superior responsivity of 66.88 mA W−1, a high detectivity of 8.12 × 10^11 Jones, and a fast rise/decay time of 79/65 ms, outstanding most existing similar reported photoelectrochemical (PEC) type optoelectronic devices. Additionally, the device exhibits excellent long-term stability and enables high-resolution underwater ultraviolet imaging. This study demonstrates that the gradient doping strategy provides a feasible approach for enhancing the PEC performance of β-Ga2O3 photoelectrodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3713-y
Layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER), yet their practical application remains limited by poor electrical conductivity and sluggish reaction kinetics. In this work, we synthesize three high-entropy LDHs (HELDHs) featuring a hierarchical architecture of microspheres assembled from ultrathin nanosheets, via a simple hydrothermal method using a combination of low-cost, catalytically active transition metals (Fe, Co, Ni, Mn, Zn, Cu, and Cr). Among them, the FeCoNiMnZn HELDH exhibits outstanding OER performance, requiring an overpotential of only 306 mV to reach a current density of 100 mA cm−2. Notably, during 200 h of continuous operation, the device exhibits a stable and, in some cases, increasing current output. This exceptional activity is attributed to the formation of abundant cation vacancies, induced by Zn leaching, which enhance the intrinsic catalytic properties by optimizing the adsorption energies of key OER intermediates. Density functional theory calculations further validate that these vacancies modulate the electronic structure and lower reaction barriers, underscoring the effectiveness of cation-vacancy engineering in high-entropy systems for efficient and durable water oxidation catalysis. The optimized catalyst was further evaluated as the air cathode in a zinc–air battery, demonstrating practical electrochemical performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3729-9
Polymer capacitors are essential for modern power electronics, but their operation is limited by poor energy density at elevated temperatures. Biaxially oriented polypropylene (BOPP), the industry standard, fails above ~105 °C. This highlight discusses a breakthrough by Yang et al. that uses a generative machine-learning pipeline to discover organic fillers with both wide bandgap (Eg) and high electron affinity (Ea), properties typically mutually exclusive. The model screened over fifty thousand structures to identify more than two hundred high-scoring candidates. Two representatives, 4,6-dinitrobenzene-1,3-dicarbonitrile and 2,4,6-tricyano-1,3,5-triazine, were synthesized, exhibiting Eg ≈ 5.5 eV and Ea ≈ 4.5 eV. Dispersed in a polyimide host, these fillers create deep electron traps that suppress leakage current and delay avalanche breakdown. Composite films achieved an energy density of 5.1 J cm−3 at 250 °C with 90% efficiency, outperforming conventional polymers. The team scaled production using a roll-to-roll line, producing kilometer-scale films with uniform dispersion. This work demonstrates a viable path to high-temperature polymer capacitors for traction inverters and DC-link applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3912-0
This erratum corrects an error in the Chinese name of co-first author Tianxiao Xiao (肖天孝) as originally published in the article 'A multi-modal smart chest patch for real-time cardiopulmonary monitoring and anomaly detection' (Sci China Mater, 2025, 68(12): 4413–4422). The corrected Chinese name is 肖天笑. The correction applies solely to the author's name and does not affect the scientific content, experimental data, or conclusions of the original paper. The authors and publisher apologize for any inconvenience caused.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112804
The rapid dissemination of antibiotic resistance genes (ARGs) in aquatic environments poses serious threats to public health and environmental safety under the 'One Health' framework. Nanoplastics (NPs), as co-occurring pollutants, can exacerbate ARG risks by promoting horizontal gene transfer (HGT), yet the influence of different functional groups on extracellular ARG (eARG) transformation remains unclear. This study investigated the effects of carboxy-modified polystyrene NPs (PS-COOH) and amino-functionalized polystyrene NPs (PS-NH2) compared to unmodified polystyrene NPs (PS) on the transformation of the extracellular resistance plasmid IE-V1955 (carrying an ampicillin resistance gene) into Escherichia coli DH5α. Results showed that PS-COOH exposure promoted plasmid transformation similarly to PS, with effects increasing over 0.1–20 mg·L−1. Low concentrations (0.1–0.5 mg·L−1) of PS-NH2 also enhanced transformation, with stronger effects than PS-COOH at equal doses, whereas high concentrations (1–20 mg·L−1) inhibited it. Mechanistically, PS-COOH (0.1–20 mg·L−1) and low PS-NH2 induced intracellular reactive oxygen species (ROS), increased cell membrane permeability, elevated the protein-to-polysaccharide ratio in extracellular polymeric substances (EPS), and promoted biofilm formation, thereby facilitating transformation. High PS-NH2 concentrations caused excessive ROS leading to cell lysis and formed aggregates with plasmids larger than membrane pores, blocking uptake. These findings provide a theoretical basis for assessing the combined environmental health risks of NPs and ARGs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010603
The global production, inventory, and retirement of lithium-ion batteries are increasing, while new technologies and materials for safety introduce various binders, lithium salts, flame retardants, and solvents, some of which may be emerging pollutants (EPs). This study identifies 43 EPs across 6 categories in the entire life cycle of lithium-ion battery production. Electrolytes contain the most EPs, including per- and polyfluoroalkyl substances (PFASs) lithium salts and solvents, as well as organophosphorus flame retardants. Production emissions of 1,3-butadiene (1,3-BD), dichloromethane (DCM), and N-methylpyrrolidone (NMP), and release of ultra-short-chain PFASs such as bis(trifluoromethylsulfonyl)imide (NTf2) and trifluoromethanesulfonamide (TfNH2) from discarded batteries require attention. Health risk assessments at production and disposal sites show that DCM poses the highest carcinogenic risk at production sites, exceeding the EPA's basic carcinogenic risk value of 1×10−6 but below the critical value of 1×10−4, with non-carcinogenic risk below the EPA threshold of 1. At disposal sites, tris(1,3-dichloro-2-propyl)phosphate (TDCPP) poses the highest carcinogenic risk, below 1×10−6, while tri(2-chloropropyl)phosphate (TCPP) exhibits the highest non-carcinogenic risk, below 1. Comparison of domestic and international regulations highlights gaps in domestic regulations. Recommendations include tiered management of similar-function chemicals, research on alternatives for high-risk chemicals, implementation of clean production mechanisms, establishment of green product standards, and development of guidelines for managing EPs. This study comprehensively summarizes EPs in the lithium-ion battery life cycle, providing technical support for their management.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122101
Bicarbonate and carbonate ions (HCO3−/CO3^2−) are ubiquitous in wastewater and readily scavenge strong oxidants, leading to the formation of carbonate radicals (CO3·−) in radical-based advanced oxidation processes. This study investigated the influence of HCO3−/CO3^2− on the degradation kinetics of sulfamethazine (SMR) in a UV/TiO2 system. The presence of HCO3−/CO3^2− enhanced the degradation rate of SMR by sixfold compared to UV/TiO2 alone. Radical quenching experiments identified CO3·− as the primary reactive species responsible for the enhanced degradation, with hydroxyl radicals (·OH) also contributing. To quantitatively delineate the roles of reactive species and account for water matrix effects, a kinetic model was constructed using Kintecus software. The model accurately predicted SMR degradation over time and the contributions of individual radicals, demonstrating good predictive capability. Application of the model to real wastewater predicted that CO3·− is the dominant radical responsible for SMR degradation. These findings highlight the critical role of carbonate radicals in UV/TiO2 processes and provide a robust modeling framework for predicting the fate of pharmaceuticals in carbonate-rich waters.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024120701
Surface waters contain numerous photoactive substances and low molecular weight carboxylic acids (LCAs). Hydroxyl radicals (HO•) can react with LCAs to generate the highly reducing carbon dioxide anion radical (CO2•−). Excited triplet state dissolved organic matter (3DOM*), a common oxidant in surface waters, may also oxidize LCAs to CO2•−, but this pathway remains unexplored. This study simulated sunlight-driven generation of CO2•− via 3DOM* using 4-benzoylbenzoic acid (CBBP) as a 3DOM* precursor and formate (HCOO−) as a model LCA. Metronidazole (MNZ) served as the target pollutant. Comparative degradation experiments in hν, hν/HCOO−, hν/CBBP, and hν/CBBP/HCOO− systems, combined with electron spin resonance spectroscopy and quenching tests, confirmed that CO2•− generated in the hν/CBBP/HCOO− system was the primary reactive species responsible for enhanced MNZ degradation, originating mainly from 3CBBP* oxidizing HCOO−. Under optimized conditions (8 mmol·L−1 HCOO−, 200 μmol·L−1 CBBP, 10 μmol·L−1 MNZ), 98.2% degradation was achieved within 30 min. Degradation efficiency increased with HCOO− concentration and was pH-independent. Cl−, NO3−, CO3^2−, and low concentrations of HCO3− inhibited degradation, while high HCO3− slightly promoted it. Humic acid (HA) inhibited degradation in a concentration-dependent manner. The system also performed well in real water matrices, suggesting potential for treating micropollutants via reductive pathways.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102403
The rapid combustion of soot at low temperatures is critical for diesel engine cold-start emission control. This study investigates the effects of water vapor (H2O) and nitrogen oxides (NOx) on electricity-pulse-sparked catalysis (EPSC) for soot combustion over a ceramic filter paper-based potassium-supported antimony-doped tin oxide (K/ATO/CP) monolithic catalyst. Under EPSC with 2000 J pulses, the presence of H2O and NOx adversely affected soot combustion performance, yet average reaction rates remained high at 12.0 μmol·gcat−1·s−1 and 9.53 μmol·gcat−1·s−1, respectively, exceeding conventional thermal catalysis (<8 μmol·gcat−1·s−1). In situ Raman and concentration profiles revealed that electricity pulses promote rapid H2O desorption, effectively alleviating H2O poisoning and restoring catalyst activity. In contrast, NOx adsorption forms stable nitrates (e.g., KNO3) that desorb slower than the soot combustion process, leading to incomplete recovery of activity. These findings highlight the importance of adsorbate desorption kinetics in EPSC and suggest that using weakly basic alkaline-earth metals (e.g., Mg, Ca, Sr) with lower nitrate decomposition temperatures could mitigate NOx poisoning. The results provide guidance for advancing EPSC technology in hybrid vehicle exhaust aftertreatment systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122501
Fullerene (C60) is an emerging atmospheric pollutant that may influence sulfate formation during haze events. This study investigated the effect of C60 on sulfate production in the gas-phase oxidation of SO2 by H2O2 using a flow tube reactor. Results demonstrated that the presence of C60 significantly increased sulfate yields. Control experiments varying C60 loading, H2O2 concentration, and ultraviolet (UV) irradiation revealed that higher C60 amounts, elevated H2O2 levels, and UV exposure enhanced the promoting effect. Mechanistic investigations via free radical trapping and X-ray photoelectron spectroscopy (XPS) indicated a pre-adsorption-oxidation pathway. XPS analysis showed electron transfer on the C60 surface, converting adsorbed S(IV) to S(VI), confirming direct participation of C60 in sulfate formation. Radical trapping experiments and model calculations confirmed that C60 promotes the generation of hydroxyl radicals (·OH) and superoxide radicals (·O2−), which are key oxidants driving SO2 conversion to sulfate. The study reveals that C60 particles markedly enhance atmospheric sulfate formation, offering a novel pathway for understanding sulfate generation mechanisms. These findings have implications for air quality modeling and haze mitigation strategies, as C60 may act as a catalytic surface for sulfate production in polluted atmospheres.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604009
Biological nitrogen removal in wastewater treatment plants (WWTPs) is often limited by insufficient influent carbon sources, necessitating external carbon addition to enhance denitrification. Conventional single carbon sources, such as sodium acetate, frequently fail to meet the metabolic demands of complex microbial communities, compromising nitrogen removal efficiency and stability. Composite carbon sources, by providing multiple electron donors, can improve metabolic cooperation among microorganisms, yet their underlying microbial mechanisms remain insufficiently understood. In this study, activated sludge from a municipal WWTP was used to investigate the microbial mechanisms of composite carbon sources during denitrification. Batch denitrification experiments were conducted in combination with metagenomic and metatranscriptomic analyses to systematically characterize microbial community structure and functional gene expression under different carbon source conditions. Results showed that, compared with sodium acetate as the single carbon source, the composite carbon source system (sodium acetate: sodium succinate: ethanol = 2:1:3) increased the denitrification rate from (6.822 ± 0.141) mg/(L·h) to (8.370 ± 0.186) mg/(L·h), representing a 22.7% improvement, while reducing N2O accumulation by approximately 55%. Metagenomic analysis revealed that Ottowia, Rubrivivax, Thauera, and Zoogloea were the dominant denitrifying genera. Metatranscriptomic results further demonstrated that the composite carbon sources significantly upregulated the transcription of key denitrification genes, with nirS, norB, and nosZ increasing by 37.8%, 27.4%, and 48.6%, respectively. In addition, the composite carbon sources promoted complementary carbon metabolic strategies among different microbial communities, enhancing electron donor supply and improving denitrification efficiency. These findings indicate that composite carbon sources synergistically enhance denitrification performance through regulation of functional gene transcription in complex microbial communities, providing a theoretical basis for carbon source optimization in WWTPs.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604003
Emerging contaminants (ECs) in wastewater from urban transportation infrastructure remain poorly characterized. This study employed high-resolution mass spectrometry (HRMS)-based non-target screening to systematically identify the composition and spatial distribution of ECs in wastewater from three functional zones of a metro maintenance depot: storeroom (S1), office/residential area (S2), and final discharge outlet (S3). A total of 417 contaminants were detected, spanning eight categories including industrial materials, pharmaceuticals, pesticides, and natural products. Among these, 48 substances were identified with Level 1 confidence via spectral matching. Pesticides exhibited the highest detection frequency and concentration levels, representing the primary contaminant load. Semi-quantitative concentration heatmaps of 24 pesticides revealed significant spatial variation: S2 showed the highest number and concentration of contaminants, reflecting inputs from landscaping and vector control; S1 and S3 showed lower levels, indicating dilution, migration, and attenuation. Representative pesticide bifenox displayed a clear concentration gradient (S2 > S1 > S3), suggesting transport mechanisms such as surface runoff, hydraulic transfer, and sorption. These findings underscore the complexity and diversity of EC sources in metro depot wastewater, highlight the need to prioritize pesticides in regulatory management, and provide fundamental data for understanding EC environmental behavior and informing water environment risk assessment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604014
Ice slurry pigging is an emerging technology for cleaning water supply pipelines, yet quantitative understanding of its cleaning mechanisms and optimal operating conditions remains limited. This study developed a computational fluid dynamics (CFD) model integrating the kinetic theory of granular flows (KTGF), the Euler-Euler method, and the shear stress transport (SST) model to simulate ice slurry flow and wall shear stress distribution. The model was validated against experimental data, showing a 6.4% error in particle concentration distribution, a 3.3% average error in solid-phase velocity in the mainstream region, and a pressure drop error within 20%. A total of 125 simulations were performed under varying initial concentrations (20%–60%), particle diameters (0.3–1.0 mm), and flow velocities (0.2–1.0 m/s). Results indicate that higher initial concentrations (60%) achieve effective cleaning of both upper and lower pipe walls, with an effective shear stress ratio of 77.39%. Larger particles exhibit pronounced upward movement, increasing non-uniformity in solid distribution. Flow velocity is the dominant factor affecting wall shear stress; at 1.0 m/s, the effective shear stress ratio reaches 83.16%. The optimal parameters for cumulative shear stress were identified as 50% initial concentration, 0.5 mm particle diameter, and 1.0 m/s flow velocity, yielding an average cumulative shear stress of 11.59 Pa·s. For effective cumulative shear stress, the same parameters produced 9.89 Pa·s, while the highest effective shear stress ratio (88.50%) was achieved with 0.3 mm particles at 1.0 m/s and 50% concentration. This research provides theoretical guidance for ice slurry pigging operations in water supply pipelines.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225204
Cobalt-doped silica aerogel (Co@Si-A) catalysts were synthesized via a one-step sol-gel method and applied for peroxymonosulfate (PMS) activation to degrade tetracycline (TC). The catalyst with 25 wt% cobalt doping (25Co@Si-A) exhibited superior catalytic performance, achieving 98.97% TC degradation within 30 min under specified conditions (TC 10 mg/L, 100 mL). Brunauer-Emmett-Teller (BET) analysis revealed a high specific surface area and well-developed porous architecture with nano-confined spaces. The 25Co@Si-A/PMS system demonstrated outstanding adaptability across a broad pH range (5–9), maintaining >95% degradation efficiency, and showed strong resistance to sulfate and nitrate ions. In real water matrices, degradation efficiency remained around 80%. After five consecutive cycles, the system retained 82.33% degradation efficiency, with cobalt ion leaching of only 23.7 μg/L in the first cycle, indicating excellent stability. Mechanistic studies using electron paramagnetic resonance (EPR), radical quenching, and probe compound tests confirmed a synergistic radical and non-radical pathway. The primary reactive species were sulfate radicals (SO4•−), hydroxyl radicals (•OH), and singlet oxygen (1O2), with contributions of 58.53%, 9.79%, and 31.68%, respectively. Electrochemical tests indicated that 25Co@Si-A exhibited superior charge transfer compared to Co3O4, attributed to the nano-confined effect of the silica aerogel, which enhanced Co(II)/Co(III) redox cycling and PMS activation. This research provides a promising strategy for utilizing silica aerogel-based catalysts in advanced oxidation processes for water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3935-1
Silk fibroin (SF)-based hydrogels are promising for biological interfaces, yet achieving multifunctionality—mechanical robustness, adhesion, conductivity, and stability—often requires chemical modification that compromises biocompatibility. Here, we report a protonation-mediated SF/polyvinyl alcohol (PVA) hydrogel adhesive that retains natural silk properties while gaining tailored functionalities. The physically crosslinked network is formed solely via molecular interactions, with phosphoric acid (H3PO4) as a protonation agent to modulate hydrogen bonding, enabling precise control over adhesion, mechanical strength, and electronic conductivity. Glycerol (Gly) is incorporated as a moisturizing agent to enhance long-term stability for skin applications. The resulting hydrogel exhibits excellent performance in monitoring electrophysiological signals, including electrocardiogram (ECG), electromyogram (EMG), and electroencephalogram (EEG), demonstrating its potential as a platform for advanced biological interfaces. This work addresses the critical challenge of developing SF-based hydrogels that combine natural advantages with multifunctionality, offering a promising route for wearable health monitors and human-machine interfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3451-2
Visual aesthetics is a key metric of semi-transparent organic photovoltaics (ST-OPVs) for building-integrated solar windows, yet previous studies have primarily focused on the compromise between efficiency and transparency. This work addresses the overlooked aspect of full visual aesthetic control, particularly the bidirectional reflected color for architectural harmony, via designing ST-OPVs with double-sided ultra-thin Ag/TeO2 transparent electrodes. This design facilitates full-spectrum color tunability covering the whole standard color gamut of CIE coordinates on both surfaces, achieved simply by adjusting layer thicknesses. The resulting devices exhibit neutral transparency (16.6%–27.0% average visible transmittance) and competitive power conversion efficiencies (8.1%–9.2%). Additionally, the devices demonstrate strong flexibility, with flexibility-adaptive coloration and curvature-enhanced aesthetics. This work presents an ST-OPV design featuring full visual aesthetics and considerable performance, paving the way for commercialization of organic solar windows for building and vehicle integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3930-3
Methylammonium lead tribromide (MAPbBr3) single crystals (SCs) are promising for room-temperature gamma-ray and X-ray detection, but scaling their size often compromises crystal quality. Here, we report a strategic precursor stoichiometry engineering approach to grow inch-sized, high-quality MAPbBr3 SCs via a constant-temperature evaporation method. We show that constructing a robust electrical double layer through organic cation modulation effectively stabilizes the colloidal precursor. This is achieved by synergistically suppressing MA+ deprotonation while promoting MA+ adsorption as counterions on the [PbBrn]2−n complexes, which collectively strengthens interparticle repulsion and raises the nucleation barrier. This multifaceted approach yields MAPbBr3 SCs with lateral dimensions up to 2 inches and an exceptional X-ray diffraction rocking curve full width at half maximum (FWHM) of 0.0093° at the (002) face. Consequently, the SCs enable spectroscopic-grade gamma-ray detection, achieving energy resolutions (ER) of 8.4% for the 57Co source (122 keV) and 11.1% for the 137Cs source (662 keV), along with a high X-ray sensitivity of 1.65 × 10^4 μC Gy−1 cm−2. This work paves the way for the practical application of MAPbBr3 SCs in high-performance gamma-ray and X-ray detection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3800-7
Two-dimensional van der Waals (vdW) crystals, stacked via atomically thin layers, exhibit rich functionalities and tunable stacking orders. Their mechanical behaviors are crucial for flexible and miniature electronics. While some vdW crystals show superior plasticity, the mechanical properties of SnS2 bulk crystals remain largely unexplored. Here, we synthesize high-quality SnS2 crystals via the Bridgman method and comprehensively investigate their mechanical properties. SnS2 bulk crystals exhibit remarkable plasticity and softness: bending and compression strains exceed 20% and 45%, respectively, without fracture, while tensile fracture strains reach up to ~12% (range 9%–16%). Scanning/transmission electron microscopy reveals multiple deformation units, including layer segments, interlayer/cross-layer slip, twisting, and twinning-like structures. These units provide multiple pathways to release strain energy, promoting plasticity. Alongside weak interlayer vdW interactions, relatively ionic and weak intralayer Sn–S bonds contribute to the softness. This work fills the knowledge gap on SnS2 mechanical properties, advancing its processing and application in diverse electronic devices. Further studies may focus on balancing plasticity and strength by tuning microstructure to activate but confine deformation units.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61102-X
Silicon-carbon composites prepared by chemical vapor deposition (CVD) are promising anode materials for high-energy-density lithium-ion batteries. However, the influence of the pore structure of the porous carbon (PC) carrier on silicon deposition behavior, and the impact of surface silicon on cycling stability, remain unclear. This study systematically investigates these effects using nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Porous carbons with varying pore architectures were synthesized by adjusting KOH activator ratios. Results show that increased micropore volume facilitates higher silicon mass loading, but also elevates the content of surface floating silicon due to greater silane exposure. Moderately increasing mesopores in high-microporosity carbon promotes deeper silicon deposition, reducing surface floating silicon. Excessive surface floating silicon hinders lithium-ion diffusion kinetics, leading to accumulation of active lithium, accelerated SEI growth, and electrode degradation. Electrochemical testing reveals that the optimized silicon-carbon composite maintains a high specific capacity of 693.1 mAh/g after 150 cycles at 0.5 C (900 mA/g). This work provides new insights into the development and failure mechanisms of CVD-derived silicon-carbon composite anodes, emphasizing the critical role of pore structure in mitigating surface silicon and enhancing cycling stability.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507088
Methanol is highly biodegradable, yet its efficient and stable anaerobic treatment is constrained by prolonged microbial adaptation to toxic substances, narrow microbial community structure, and poor sludge granulation. This study applied two functional additives—sodium bicarbonate (NaHCO3) as an inorganic carbon source (IC) and an amino-acid-rich organic functional supplement (FS)—to accelerate the startup of two upflow anaerobic sludge blanket (UASB) reactors. UASB-A received 3,000 mg·L−1 NaHCO3 and 127 mg·L−1 FS, while UASB-B received only 3,000 mg·L−1 NaHCO3. Both additives enabled rapid startup and granulation by shortening hydraulic retention time (HRT) and increasing organic loading rates (4, 6, 9, 15, 20, and 30 g COD·L−1·d−1). Granulation was evidenced by increased total suspended solids (TSS), volatile suspended solids (VSS), and particle size distribution. Microbial community analysis at HRT 0.2 d revealed highest relative abundances of Acetobacterium at 30.2% (UASB-A) and 36.9% (UASB-B). NaHCO3 supplementation enhanced syntrophy between Acetobacterium and the acetoclastic methanogen Methanothrix, while FS significantly increased the abundance of Sporomusa, establishing a novel syntrophic relationship with Methanothrix. These interactions promoted sludge granulation. The study demonstrates that functional additives facilitate rapid startup and granulation in methanol anaerobic treatment, offering a strategy to overcome process bottlenecks.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60630-X
Chemical looping methane steam reforming (CL-MSR) enables sequential production of high-selectivity syngas and high-purity hydrogen via redox cycling, yet single iron-based oxygen carriers suffer from poor cycling stability, low reactivity, and sintering. This study modified Fe2O3/Al2O3 oxygen carriers with Cu, La, and Ce additives via dip-coating, and systematically characterized their physicochemical properties, reactivity, and hydrogen production performance. Results showed that spinel-phase CuFe2O4 exhibited higher reactivity than perovskite LaFeO3 and CeO2, promoting deeper reduction of Fe2O3. Fe58Cu2Al achieved an oxygen storage capacity of 6.5 mmol/g. During CH4 reaction, Fe58Cu2Al exhibited the highest oxygen loss of 12.1 g/100 g oxygen carrier, with syngas yield of 5.15 mmol/g—1.33 and 1.59 times that of Fe60Al. In hydrogen production, the 2% Cu-modified carrier yielded 5.13 mmol/g H2, 1.51 times that of pristine Fe60Al, with purity exceeding 98%. After ten cycles, H2 yield remained at 3.61 mmol/g, surpassing the single-cycle output of pristine Fe60Al (3.39 mmol/g), demonstrating superior dispersion and coking resistance. The study establishes Cu modification as an effective strategy to enhance reactivity and cyclic stability of iron-based oxygen carriers for CL-MSR hydrogen production.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60612-8
Coal gasification fine slag (CGFS) is a solid waste generated in large quantities during coal gasification, containing residual carbon and inorganic ash rich in SiO2, Al2O3, CaO, Fe2O3, and MgO. The carbon-rich components (CGFS-H) of CGFS, typically comprising 20–50% residual carbon, present both environmental challenges and opportunities for resource recovery. This study systematically investigates the selective leaching behavior of Fe3+, Al3+, and Ca2+ from CGFS-H using three organic acid extractants: citric acid, tartaric acid, and tetrasodium iminodisuccinate (IDS-4Na). The results demonstrate distinct selectivity: IDS-4Na exhibits the highest leaching yield and selectivity for Fe3+, achieving a single leaching yield of 41.2% while suppressing Ca2+ and Al3+ leaching to below 4%, with a selectivity ratio of Fe3+ to Al3+ and Ca2+ of 10.73. Tartaric acid effectively leaches both Fe3+ and Al3+, with single yields of 38.7% and 33.5%, respectively, while Ca2+ leaching remains below 5%, yielding a selectivity of Fe3+ and Al3+ relative to Ca2+ of 14.73. Citric acid preferentially leaches Ca2+, achieving a single yield of 71.5%, but also leaches Fe3+ and Al3+ at 35.2% and 39.1%, respectively, resulting in a low selectivity ratio of Ca2+ to Fe3+ and Al3+ of 0.96. Based on these selective affinities, a green stepwise separation method was developed using sequential leaching with IDS-4Na, tartaric acid, and citric acid. Under optimal conditions, cumulative leaching yields of 79.8% for Fe3+, 65.08% for Al3+, and 78.6% for Ca2+ were achieved. XRD, XRF, and SEM analyses elucidate the complexation mechanisms, indicating that the synergistic effects of selective coordination between structurally diverse organic acids and metal ions drive the process. This advancement provides a critical foundation for developing Ca/Fe/Al hydrotalcite materials using CGFS-H as a sustainable feedstock, promoting resource-efficient utilization of coal gasification fine slag.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60620-7
Direct coal liquefaction (DCL) diesel constitutes over 60% of DCL products, yet its cetane number (30–40) falls short of the automotive diesel standard (≥45). Rapid and accurate compositional analysis is essential for optimizing properties via component blending. Traditional gas chromatography offers high accuracy but is unsuitable for online industrial monitoring. Near-infrared (NIR) spectroscopy enables rapid, non-destructive analysis, but spectral interpretation is complex. This study integrates NIR spectroscopy with machine learning (ML) to construct a spectral-composition database for DCL diesel. Feature extraction using correlation coefficient and mutual information methods screened key wavelength variables, reducing dimensionality from ~1800 to ~200 wavelengths. Three ML models—Lasso, SVR, and XGBoost—were compared. Excluding spectral data with absorbance >1 significantly improved model accuracy, increasing test set R² from 0.85 to 0.96. After feature extraction, the optimal variable count was 177, enhancing computational efficiency. Among models, SVR-MI-0.9 (mutual information feature selection) achieved the best performance, with training and test set R² values exceeding 0.98, enabling precise prediction of paraffin, naphthene, and aromatic contents. This research provides a robust methodology for intelligent online quality monitoring. An intelligent NIR spectroscopy data analysis software was independently developed based on the established model. Compared with comprehensive two-dimensional gas chromatography, the software reduced analysis time by over 98%, with absolute prediction error below 0.2%. Thus, rapid analysis of DCL diesel components was successfully realized.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225195
The separation of multicomponent azeotropic mixtures remains a persistent challenge in industrial wastewater treatment due to complex phase equilibrium behavior involving minimum/maximum boiling azeotropes and liquid-liquid phase separation. Pharmaceutical wastewater often contains a ternary mixture of acetonitrile, n-propanol, and water, which exhibits significant non-ideality and multiple azeotropic points, including binary azeotropes for acetonitrile-water, n-propanol-water, and acetonitrile-n-propanol pairs, as well as a ternary azeotrope. This study conducted a comprehensive investigation encompassing thermodynamic modeling, solvent screening, process design, and multi-objective optimization. A reliable thermodynamic framework was established using an activity coefficient model (NRTL), validated against experimental data. Systematic analysis of vapor-liquid equilibrium diagrams identified ethylene glycol as the optimal extractant due to its superior selectivity. Three distinct separation processes were developed: a conventional three-column distillation sequence (TCED), a four-column pre-concentration extractive distillation configuration (FCED), and an innovative three-column integrated pre-concentration extractive distillation system incorporating a thermally coupled column (TCED-IDC). Multi-objective optimization using the improved nondominated sorting genetic algorithm (NSGA-II) targeted total annualized cost (TAC), CO2 emissions (ECO2), and thermodynamic efficiency (η), subject to stringent purity constraints (≥99.9 wt% for products and ≥99.99 wt% for extractant recycle). The integrated three-column configuration achieved 41.2% lower TAC, 50.4% lower CO2 emissions, and 102% higher thermodynamic efficiency compared to the conventional TCED process. This integrated pre-concentration extractive distillation process is established as an industrially viable, energy-efficient solution for acetonitrile-n-propanol-water separation, aligning with green chemistry principles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3756-5
Photochemical organic synthesis exploits the distinctive redox properties of excited-state photocatalysts to avoid stoichiometric redox reagents, enabling green and sustainable transformations. However, the conversion efficiency of light-to-chemical energy remains a key bottleneck for large-scale application. Here, we synthesize ultra-thin graphitic carbon nitride (g-C3N4) nanosheets by regulating precursor types and thermal protocols. In photochemical Minisci-type cross-couplings, this ultra-thin carbon nitride exhibits high catalytic efficiency, achieving rates of 40 mmol g_cat−1 h−1 under LED irradiation and 10.9 mmol g_cat−1 h−1 under natural sunlight. The photocatalyst's high specific surface area (120 m2 g−1) enhances substrate adsorption capacity and accelerates surface electron transfer, boosting photocatalytic efficiency. Furthermore, the material demonstrates excellent recycling stability, and the reaction system was successfully scaled to gram-level, highlighting its potential for industrial applications. This work provides a typical case for solar-driven organic synthesis and inspires further developments in heterogeneous photocatalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3897-6
Decoding the nature of catalytically active sites is an essential prerequisite for the rational design of catalysts for electrochemical H2O2 synthesis, but faces significant challenges, particularly for controversial cobalt single-atom catalysts (Co SACs). Herein, we report trace Co single-atom sites embedded within pyridinic N-rich carbon nanospheres (Co1-NNH3-C), synthesized via a self-assembly coupled surface-coating strategy. The Co1-NNH3-C catalyst demonstrates remarkable H2O2 selectivity (99%) and activity at current density of −3.5 mA cm−2 in 0.1 M H2SO4. Through a combined approach of molecular probe experiments, surface modification, and density functional theory (DFT) calculations, we disclose that pyridinic N, rather than Co single atoms, serves as the direct active site for 2e− oxygen reduction reaction (ORR). The trace Co (0.05 wt%) indirectly facilitated pyridinic N formation during pyrolysis but exhibits negligible direct catalytic involvement. DFT reveals pyridinic N sites optimize OOH intermediate adsorption (ΔG*OOH = 4.0 eV) and minimize reaction overpotential of 0.20 V, enabling scalable H2O2 production (907.5 mmol gcat−1 h−1). This work redefines the role of trace metal in SACs, providing a paradigm for designing metal-induced carbon catalysts for sustainable electrosynthesis for H2O2.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3801-1
Traditional phase transition gel platforms face significant challenges in achieving time-gated information encryption and decryption. Here, we report a photocleavable gel that enables time-gated information encryption and decryption, enhancing information storage security. The gel is synthesized by copolymerization of hydrophobic ortho-nitrobenzyl acrylate (NA) and acrylamide. Upon ultraviolet (UV) irradiation, hydrophobic NA units partially cleave to yield orange-colored o-nitrosobenzaldehyde (NSBA) molecules and hydrophilic acrylic acid groups, altering local color and hydrophilicity. Information is spatially encoded using a photomask. The written information is encrypted by dissolving NSBA molecules in dimethyl sulfoxide (DMSO). Upon aqueous immersion, differential hydrophilicity between irradiated and non-irradiated zones triggers localized phase separation, facilitating decryption. Notably, photolysis kinetics is time-gated, ensuring decryption only within a specific time window in water. This method surpasses traditional gel constraints, offering a novel paradigm for secure information storage.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511090
In ecological restoration projects such as wetland reconstruction and mine reclamation, seedling transplantation or mechanical damage often leads to slow healing, reducing survival rates and weakening carbon sequestration and soil-water conservation functions. To address secondary pollution from traditional chemical remediation, this study developed a self-powered piezoelectric hydrogel for green electrical stimulation of plant wounds. The hydrogel, based on polyacrylamide/polyethylene glycol (PAM/PEG) with CaCl2, formed a microporous, locally ordered piezoionic network. Characterization included microstructure, piezoionic response, and water retention. At 30 °C and 55% relative humidity, the hydrogel retained about 70% mass after 80 h of continuous water loss. Under simulated environmental mechanical forces, the hydrogel generated a peak voltage of approximately 6 mV. In tomato seedling stem models, wound callus area ratios reached approximately 49.50%, 64.87%, and 86.13% at 3, 5, and 10 days, respectively, when the hydrogel was attached and driven by environmental forces. The PAM/PEG/CaCl2 hydrogel efficiently converts environmental mechanical energy into mild electrical signals, promoting plant wound healing, reducing exogenous chemical use, and offering a low-carbon, environmentally friendly material pathway for ecological restoration and urban green space management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606006
Chitosan-based microsphere composites have attracted considerable attention for phosphorus adsorption due to their facile preparation, low cost, environmental friendliness, and high uptake capacity. This review summarizes the physicochemical properties and preparation methods of chitosan microspheres for phosphate removal, outlines common modification strategies to enhance adsorption capacity, and discusses their applications in aqueous environments. Adsorption mechanisms, regeneration, and resource recovery of spent microspheres are analyzed. Challenges and recommendations are proposed, including streamlined preparation, enhanced phosphorus recovery, removal of multiple phosphorus forms, and practical implementation. The review aims to guide the development of high-performance chitosan-based microspheres for phosphorus removal.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606022
This study presents a numerical simulation of the internal flow field in a volatile organic compounds (VOCs) catalytic combustion reactor used in an enameled wire enterprise. Using ANSYS Fluent, the effects of inlet expansion section length, inlet expansion section angle, and catalyst bed spacing on the velocity field were systematically investigated. Additionally, the influence of heating tube configuration on the temperature field was analyzed. The results indicate that an expansion section length of 250 mm is optimal, balancing spatial constraints and the avoidance of recirculation zones. A zero-degree expansion angle yields the most uniform velocity distribution, though practical considerations necessitate case-specific angle selection. A catalyst bed spacing of 0.05 m satisfies the engineering requirement of maintaining pressure drop across a single catalyst layer below 200 Pa while significantly improving gas distribution within the bed. Alternating heating tubes on both sides of the reactor enhance temperature uniformity and elevate the overall catalyst bed temperature, thereby promoting efficient VOCs catalytic combustion. These findings provide quantitative guidance for reactor design optimization, contributing to improved catalytic performance and extended catalyst lifespan.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3886-1
Organic-inorganic hybrid Mn(II) halides have attracted considerable attention for optoelectronic applications due to their environmental friendliness and high photoluminescence quantum yield (PLQY) originating from the d-d transition (4T1(G) → 6A1) of Mn2+. However, complex synthesis processes restrict their potential for low-cost, large-scale production. In this study, the Mn(II) halide (C22H22O2P)2MnBr4 was synthesized via a simple and efficient mechanochemical ball-milling approach, achieving high photoluminescence efficiency and production yield. The halide exhibits intense green emission centered at 520 nm with a PLQY of up to 96.1%. Combined experimental and theoretical characterizations confirm that the strong light emission originates from the synergistic interaction between organic cations and inorganic framework components. A white light-emitting diode (WLED) device based on (C22H22O2P)2MnBr4 was fabricated, exhibiting bright white light emission and a wide color gamut of 113% NTSC. Furthermore, a scintillation screen based on (C22H22O2P)2MnBr4 was fabricated and utilized to investigate internal structures of various objects. The screen demonstrates a high relative light yield of 70546 photons MeV−1, a low detection limit of 33.8 nGy air s−1, and a spatial resolution of up to 12.36 lp mm−1. Finally, by integrating the scintillation screen with a thin-film transistor (TFT) backplane, the resulting X-ray detector successfully enables simulated medical imaging of dental caries. This work establishes a robust foundation for large-scale synthesis of highly efficient luminescent Mn(II) halides and highlights their potential in multifunctional light-emitting applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3890-6
Photothermal catalysis offers a sustainable route for CO2 conversion to value-added chemicals, yet precise control of active sites and light-harvesting materials remains challenging. Here, we report the rational integration of three-dimensional ordered macroporous (3DOM) CeO2 with positively charged (Niδ+)n clusters to construct efficient photothermal catalysts for the reverse water gas shift (RWGS) reaction. The 3DOM architecture enhances light absorption, improves access to active sites, and provides a confined environment for reactant enrichment. Engineering (Niδ+)n clusters within 3DOM CeO2 not only affords highly active sites for H2 adsorption and dissociation but also modulates the local structure of CeO2 to promote CO2 adsorption and activation. Furthermore, the (Niδ+)n clusters significantly enhance light-harvesting capability across the UV-vis-NIR spectrum, generating a pronounced photothermal effect that accelerates reaction kinetics. The optimized (Niδ+)n/CeO2 catalyst exhibits outstanding photothermal catalytic performance, achieving a CO production rate of 63.36 mmol g−1 h−1 in a flowing reaction with CO selectivity of 93% under simulated solar irradiation (2.6 W cm−2). Theoretical calculations reveal that the (Niδ+)n/CeO2 catalyst reduces the thermodynamic energy barrier for *COOH formation in CO2 hydrogenation. This study offers valuable insights into the design of photothermal catalysts, highlighting the significant potential of active-site engineering in promoting efficient CO2 conversion for practical solar-to-fuel production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3934-1
Solar energy, a clean and abundant resource, can be stored as latent heat in solid-solid phase change materials (SSPCMs) and subsequently utilized, offering great potential for advancing passive thermal management technologies such as thermal camouflage. Conventional SSPCMs often require active heating for high-temperature conditions, leading to additional energy consumption. Moreover, their permanent crosslinked structures limit reprocessability and increase environmental burden. Herein, we present a lizard-skin-inspired, solar-thermal-responsive, and reprocessable SSPCM (FTSPCM) featuring a dual crosslinked structure composed of dynamic phenol–carbamate bonds and Fe3+@Tannic acid (TA) coordination. Polyethylene glycol (PEG) functions as the phase change segment, while TA introduces both reversible covalent crosslinking and photothermal responsiveness. The FTSPCM exhibits a high latent heat of 102.9 J g−1, excellent shape stability, and maintains its thermal performance after three reprocessing cycles at 120 °C. The Fe3+@TA coordination network enables strong near-infrared absorption and efficient solar-thermal conversion, achieving a surface temperature of 62 °C and a conversion efficiency of 96.85% under 2 Suns irradiation. This dual-function design allows the material to achieve passive thermal camouflage via latent heat release at low temperatures and solar-assisted photothermal heating at high temperatures. This work presents a sustainable strategy for developing reprocessable, solar-responsive SSPCMs, showcasing the distinctive advantages of tannic acid-derived polyphenol chemistry in constructing passive thermal management systems for energy-efficient thermal camouflage and solar-driven thermal energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4140-9
Metal covalent organic frameworks (MCOFs) are promising photocatalysts for carbon dioxide reduction reaction (CO2RR). However, the synthesis of ketimine-linked COFs remains challenging due to the low reactivity of ketones. Here, we report a straightforward strategy to construct diketimine-linked MCOFs via the condensation of acenaphthenequinone (Ace) with 1,3,6,8-tetra(4-aminophenyl)pyrene (TAPPy). The metal-free COF (TACOF-AA) exhibits AA stacking, while the addition of NiCl2·6H2O under identical conditions yields an AB-stacked Ni-based MCOF (Ni-TACOF-AB). The coordinated Ni species serve as active sites for CO2RR and enhance electron-hole separation. Photocatalytic tests demonstrate that Ni-TACOF-AB achieves a CO evolution rate of 11.71 mmol g−1 h−1 with 99.9% selectivity, which is 7.6 times higher than that of TACOF-AA. Density functional theory (DFT) calculations reveal that Ni-TACOF-AB lowers the activation energy barrier of the rate-determining step by regulating local charge distribution, facilitating electron transfer to adsorbed CO2. This work provides a novel approach for synthesizing ketimine-based COFs and highlights the importance of interlayer stacking in modulating photocatalytic performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4148-3
Biological ion channels exhibit multistate transport behavior beyond simple binary open-closed conformations, enabling dynamic control of neural signaling and transmembrane substance transport. Inspired by this, we synthesized a triphenylamine-ketone donor-acceptor (D-A) type poly(aryl amine-ketone) with multiple redox sites, allowing continuously tunable electrochemical states via hierarchical electron transfer. Combining this polymer with two-dimensional conductive MXene, we constructed a biomimetic nanofluidic transistor. Through side-group tuning to optimize redox matching, the polymer undergoes reversible conformation switching via intramolecular charge transfer at voltages below 1 V. The field-driven conformational changes induce electrostatic attraction, promoting reversible contraction of MXene interlayers. Synergistic coupling of interlayer spacing variation and dynamic interfacial charge rearrangement enables precise hierarchical control of ion flux. The device achieves three switchable ion transport states—closed, partially open, and fully open—with an ion switching ratio of 10 and outstanding cycling stability. Furthermore, synaptic plasticity features emulate fundamental attributes of biological signaling, providing a foundation for bioinspired neuromorphic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3914-7
Incorporating fluorinated side-chains into M-series acceptors enhances the fill factor (FF) and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the impact of fluorinated side-chain positions on charge mobility and photovoltaic performance remains unexplored. Here, we synthesize a partially fluorinated alkyl chain, 7-butyl-1,1,1,2,2-pentafluoro-octyl, and attach it to either the oxygen or nitrogen atoms of the M-series acceptor backbone, yielding two new acceptors, O5F and N5F. Compared to O5F, N5F exhibits closer π-π stacking and higher charge mobility. Consequently, PM6:N5F-based devices achieve a PCE of 18.8% with an FF of 80.7%, surpassing PM6:O5F counterparts (PCE 17.8%, FF 79.2%). The 18.8% PCE is among the highest reported for A-D-A-type small-molecule acceptors. Notably, PM6:N5F devices show significantly improved operational stability, with a T80 lifetime of 1084 hours under one-sun illumination, versus 123 hours for PM6:O5F. This work demonstrates that positioning partially fluorinated side-chains on nitrogen atoms optimizes intermolecular packing and carrier transport, enhancing both efficiency and stability. It underscores the potential of partially fluorinated side-chains in designing high-performance NFAs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3976-x
The discovery of high-temperature superconductivity in bilayer nickelate La3Ni2O7−δ (La-327) under high pressure and in thin films at ambient pressure has opened new avenues in superconductivity research. However, La-327 exhibits a narrow phase stability range, leading to stacking faults that suppress bulk superconductivity. Chemical substitutions, particularly at the A-site with smaller rare-earth ions, have been shown to enhance phase purity and reduce stacking faults, while also increasing the orthorhombic distortion and chemical pressure. In this work, we apply the high-entropy (HE) strategy to stabilize the 327 phase with reduced average A-site ionic radius (rA). We successfully synthesized medium-entropy La1.2Pr0.6Nd0.6Sm0.6Ni2O7−δ (ME-327) and high-entropy La0.67Pr0.67Nd0.67Sm0.33Eu0.33Gd0.33Ni2O7−δ (HE-327) polycrystalline samples. These compositions satisfy medium- and high-entropy criteria, with rA values of 1.181 Å and 1.164 Å, respectively. The samples are phase-pure and homogeneous. HE-327 exhibits the lowest cell volume, largest orthorhombicity, and shortest interlayer Ni-Ni distance among reported bilayer nickelates. Physical property measurements reveal low electrical conductivity and a high density-wave (DW) transition temperature. Under high pressure, HE-327 shows a resistivity anomaly at 103 K under 31 GPa, suggesting a possible superconducting transition. Extrapolation indicates that Tc under high pressure exceeds 100 K for HE-327, correlating with reduced rA and enhanced interlayer coupling. Our results demonstrate the ionic size effect and the effectiveness of the HE approach in stabilizing bilayer nickelates, providing a new avenue for developing superconducting materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3866-y
Precise measurement of flight parameters—including angle of attack (AOA), angle of sideslip (AOS), and airspeed—is critical for stabilized control of unmanned aerial vehicles (UAVs) in complex aerodynamic environments. Conventional rigid sensors fail to conform to curved leading edges, disrupting local flow and degrading aerodynamic performance, and are ill-suited for UAV miniaturization. Emerging flexible sensing technologies using hot-film, piezoresistive, or capacitive transduction offer potential solutions. This work presents a flexible pressure-velocity sensing patch developed by Professor Jiang's team at Beihang University. The patch integrates a capacitive differential pressure sensor array and a vector flow sensor, fabricated via a multi-layer polyimide bonding process. The capacitive differential pressure sensor features dual-layer chambers, achieving a resolution of 12 mPa within 0–1 Pa, superior to traditional single-layer designs. The vector flow sensor operates on the calorimetric principle, using a micro-heater and thermistor array to characterize flow velocity and direction. A novel pressure-velocity fusion (PVF) algorithm introduces spanwise velocity (Vz) to decouple AOA and AOS, reducing computational complexity compared to classic three-sensor algorithms. Computational fluid dynamics (CFD) simulations validated the algorithm's reliability under wind tunnel conditions. The sensing patch enables simultaneous measurement of multiple flight parameters with high precision and low computational cost, addressing the limitations of rigid sensors and advancing UAV aerodynamic sensing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510034
Phosphonate wastewater, characterized by stable C–P bonds, poses significant environmental risks due to its resistance to degradation and potential to contribute to eutrophication. This study developed a chloride-enhanced Fe(II)/PMS/H2O2 system for the oxidative degradation of 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC) and simultaneous recovery of phosphorus as iron phosphate (FePO4). Under optimal conditions (0.1 mmol/L PBTC, 1.0 mmol/L Fe(II), 0.5 mmol/L PMS, 0.5 mmol/L H2O2, 10 mmol/L NaCl, initial pH 3.0, 60 min), total phosphorus (TP) removal reached 100%, with phosphorus nearly completely recovered as FePO4 precipitate. Increasing NaCl concentration and temperature enhanced TP removal, while pH significantly influenced removal efficiency and product speciation; acidic conditions (pH < 4.3) favored FePO4 precipitation. Coexisting Ca2+ and Mg2+ had negligible effects, whereas HCO3− and humic acid (HA) inhibited TP removal in a concentration-dependent manner. Radical quenching and electron spin resonance (ESR) analyses identified hydroxyl radicals (•OH), ferryl ion (Fe(IV)=O), sulfate radicals (SO4•−), and chlorine radicals (Cl•) as primary reactive species, with •OH playing a dominant role. Chloride introduction promoted the generation of multiple reactive species, and Cl• and its derivative Cl2•− directly attacked the C–P bond and phosphonate group, facilitating phosphorus release as PO43− and subsequent FePO4 formation. The system's feasibility was validated using actual industrial circulating cooling water. This study provides a novel approach for phosphonate wastewater treatment and phosphorus recovery.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021301
Lithium cobalt oxide (LCO) nanoparticles (NPs), generated during the lifecycle of LCO batteries via mechanical wear, pose respiratory health risks. This study systematically assessed LCO NPs' physicochemical properties, ion release, and immunotoxicity using multi-scale models. LCO NPs exhibited irregular morphology, layered crystal structure, good dispersion, and negative surface charge. Cobalt ion release was minimal: 1.03% in deionized water and 0.11% in cell culture medium. In vitro, LCO NPs significantly induced reactive oxygen species (ROS) production and secretion of pro-inflammatory cytokines (IL-6, IL-1β, TNF-α) in macrophages, promoting M1 polarization. In vivo, intranasal exposure caused dose-dependent pulmonary accumulation, alveolar destruction, inflammatory cell infiltration, and elevated cytokines in bronchoalveolar lavage fluid (BALF). Transcriptomic analysis revealed significant enrichment of NF-κB, JAK-STAT, and Toll-like receptor signaling pathways, implicating these in macrophage activation and inflammation amplification. This multi-level study elucidates LCO NPs' immunotoxicity mechanisms, providing a scientific basis for environmental health risk assessment and management of lithium-ion battery materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040104
The oxidative transformation of 2,6-dichlorophenol (2,6-DCP) was investigated in three typical zonal soils: black soil, red soil, and brown soil. Results demonstrated that 2,6-DCP underwent oxidative coupling in all soils, yielding hydroxylated polychlorinated diphenyl ethers (OH-PCDEs) and hydroxylated polychlorinated biphenyls (OH-PCBs) as primary products. The highest oxidative efficiency occurred in black soil, with approximately 85.1% of 2,6-DCP transformed within three days. In contrast, red and brown soils exhibited lower efficiencies, indicating a strong dependence on soil properties. Thermodynamic analysis revealed that the oxidative coupling reaction is endothermic, with elevated temperatures favoring reaction progress. Furthermore, soil microorganisms and dissolved oxygen were identified as critical controlling factors, acting synergistically to drive the reaction. This study provides the first evidence of natural oxidative coupling of 2,6-DCP in soil, forming OH-PCDEs and OH-PCBs. These findings offer significant scientific insight into the environmental fate of halogenated phenolic pollutants in terrestrial systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032401
Diazepam (DZP), a benzodiazepine anxiolytic drug, has been a persistent contaminant in fishery water environments. In China, DZP is classified as a veterinary drug that must not be detected in animal-derived foods, yet it is frequently found in aquatic products, posing significant risks to ecological health and food safety. This review systematically summarizes the current pollution status of DZP in fishery water and its adverse effects on aquatic organisms, emphasizing its persistence in both water and aquatic products. The paper comprehensively examines advances in detection techniques, including gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS), as well as treatment technologies such as adsorption, photolysis, chemical oxidation, and biodegradation. Critical gaps remain in the integration of these technologies for practical remediation. The review underscores the urgent need for enhanced monitoring and risk assessment of DZP contamination, alongside the development of more efficient and scalable treatment methods. By consolidating current knowledge, this work provides technical support for aquatic organism protection and fishery water management, and serves as a reference for future research and technological innovation in this field.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031304
The Qingling River, a representative silicate rock catchment in the upper Yangtze Basin, is vital for agricultural productivity in central Yunnan. To investigate its hydrochemical characteristics, river water samples were systematically collected during both dry and wet seasons. Employing hydrochemical diagrams, statistical analysis, and absolute principal component score-multiple linear regression (APCS-MLR) modeling, we identified influencing factors and their contributions to water chemistry and evaluated irrigation suitability. Results showed that pH ranged from 7.36 to 9.18 in dry season and 7.12 to 8.92 in wet season, with total dissolved solids (TDS) varying between 119–2684 mg·L−1 and 125–2342 mg·L−1, respectively. Dominant cations were Ca2+ and Na+, while anions were primarily SO4^2− and HCO3^− in both seasons; notably, SO4^2− concentrations significantly exceeded the Yangtze River Basin’s average. Hydrochemical types varied seasonally: HCO3·SO4-Ca·Mg and HCO3·SO4-Ca dominated in dry season, whereas HCO3·SO4-Ca·Na, HCO3·SO4-Ca·Mg, and HCO3-Ca prevailed in wet season. The river water was affected by five factors: sulfuric acid-dominated water-rock interactions, carbonic acid-dominated water-rock interactions, domestic sewage discharge, agricultural non-point source pollution, and unknown sources. Contribution rates were 47.90%, 24.80%, 16.98%, 2.40%, and 7.92% in dry season, and 28.23%, 28.94%, 27.48%, 2.02%, and 13.34% in wet season, respectively. Water-rock interactions emerged as the primary control on hydrochemistry. While most samples were suitable for irrigation, a few exhibited high salinity, warranting cautious use. This study provides scientific support for irrigation water resource management and safe utilization in the Qingling River Basin.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040701
Goaf water (GW), formed by water accumulation in coal mine goafs, poses ecological risks due to its pollutant content. While previous studies focused on physicochemical properties, microbial community dynamics and their effects on plants remain underexplored. Maize (Zea mays L.) is sensitive to water quality changes, making it a suitable model for ecological risk assessment. This study investigated GW samples from a coal mine in Yangquan, Shanxi Province, using metagenomic sequencing to analyze microbial communities and maize seed cultivation experiments to evaluate growth effects. Results demonstrated that GW significantly inhibited maize growth, particularly lower-depth samples. Microbial diversity and composition varied markedly with depth; lower-depth GW enriched distinct microbial species potentially influencing plant growth. These microbes may regulate plant development through metabolic pathway modulation. The study elucidates the complex impacts of GW microbial communities on plant growth and emphasizes their importance in ecological risk assessment of GW.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026030202
High nitrogen (N) inputs, low N use efficiency, and substantial greenhouse gas emissions constrain sustainable double-cropping rice production in the middle and lower reaches of the Yangtze River. To evaluate whether humic acid urea (HAU) can reconcile yield stability with N reduction and carbon mitigation, a field experiment was conducted in a double-cropping rice system. Five treatments were established: conventional urea at the recommended N rate (U), HAU at the recommended N rate (HAU), conventional urea with a 20% reduction in N input (U-20), HAU with a 20% reduction in N input (HAU-20), and a no-N control (CK). Rice yield, N uptake and utilization, and the full life-cycle carbon footprint were quantified. Results showed that HAU significantly increased double-cropping rice yield by 6.46% (early rice) and 8.76% (late rice) compared to U (P < 0.05). HAU-20 maintained yield equivalent to U, while U-20 significantly reduced yield. HAU-20 significantly improved nitrogen fertilizer apparent utilization rate, agronomic efficiency, and partial factor productivity. Specifically, apparent utilization rate increased by 9.24 percentage points (early rice) and 7.80 percentage points (late rice); agronomic efficiency increased by 18.51% and 26.69%, and partial factor productivity by 22.79% and 25.58% for early and late rice, respectively (P < 0.05). Life-cycle carbon footprint was significantly reduced by 26.25% (early rice) and 40.38% (late rice) under HAU-20 compared to U, with per-unit product carbon footprint reduced by 0.22 t CO2-eq·t−1 and 0.86 t CO2-eq·t−1, respectively. The reduction was primarily attributed to decreased CH4 and N2O emissions: early rice CH4 and N2O cumulative emissions decreased by 28.92% and 44.34%, and late rice by 44.46% and 63.85% (P < 0.05). In conclusion, HAU with 20% N reduction sustains yield, enhances N use efficiency, and significantly lowers carbon footprint, offering a viable path for green and low-carbon double-cropping rice production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4025-y
Gd3+-sensitized Tb3+-based glasses are high light-yield scintillators. Energy transfer sensitization between Gd3+ and Tb3+ is well-recognized. Gd3+ ions are also found to typically modulate the interionic distances of Tb3+ ions; however, the mechanism why this effect enhances the latter’s photoluminescence still remains unclear. This work focuses on Gd3+, Tb3+ co-doped La2O3-B2O3-SiO2 (LBSO), first demonstrating Tb3+ clusters via spectroscopy. LBSO’s optimal Tb3+ single-doping concentration is 37%, rising to 50% with 20% Gd3+. The LBSO:20%Gd3+,50%Tb3+ sample exhibits a 542 nm emission intensity 2.22 times that of the 37%Tb3+ single-doped sample, 38% scintillation efficiency (vs. BGO), and >20 lp mm−1 X-ray resolution. The introduction of Gd3+ increases the interionic distance between Tb3+ ions within the clusters, thereby suppressing the concentration quenching effect and enhancing the fluorescence emission. We propose this mechanism as “cluster-dispersion sensitization effect”. This effect was further confirmed in other glass systems (LBSO:Lu3+, Tb3+, LBSO:Y3+, Tb3+, Bi-based:Lu3+, Tb3+, etc.). Spectroscopic analysis shows Gd3+-Tb3+ energy transfer efficiency up to 80%. In conclusion, Gd3+ synergistically enhances Tb3+ fluorescence via both effects. These findings not only fully elucidate the sensitization mechanism of Gd3+ ions in Gd3+, Tb3+ co-doped scintillating glasses but also provide new insights for researching the manipulation of activator ion clusters in luminescent materials. In search for novel scintillators, cluster-dispersion sensitization effect may greatly improve their spatial resolution via intrinsic architectures design in glasses, ceramics, thin films, and nanoparticles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4012-4
Stimuli-responsive fluorescent hydrogels, owing to their tunable optical properties and unique smart response characteristics, have significant potential in encryption applications and information security. However, most current systems are limited to single-stimulus responsiveness and lack the capability for programmable information erasure or multi-modal dynamic synergy. Hence, we propose a multi-stimuli-responsive phase-change hydrogel incorporating aggregation-induced emission hydrophobic carbon dots (AIE-HCDs) and polyethylene glycol (PEG)-cellulose network, demonstrating dynamic fluorescence chromism under various external triggers. The hydrogel exhibits solvent-exchange-triggered fluorescence color changes from blue to red, enabled by the concentration modulation of AIE-HCDs through the exchange between PEG and water. Additionally, the temperature-induced phase transition of PEG from crystalline to molten state modulates the aggregation and dispersion of AIE-HCDs, thereby enabling dynamic fluorescence color changes. The phase transition further confers excellent shape-memory behavior and adjustable mechanical properties, with the tensile modulus varying from 6.28 MPa in the molten state to 36.23 MPa in the crystalline state, while maintaining high transparency (~88% in the molten state). By utilizing micro-contact printing and the multi-stimulus response, an encryption platform enables information to be hidden, selectively read under sequential stimuli (thermal, UV, and solvent), and completely erased upon demand. This strategy demonstrates significant potential for advancing high-level information encryption and anti-counterfeiting technologies.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512052
Constructed wetlands (CWs) with conventional substrates often exhibit limited removal of nitrogen and antibiotics from secondary effluent. This study developed an iron-carbon-manganese ore (Fe-C-Mn) composite substrate CW to enhance simultaneous removal of nitrogen and tetracycline (TC). Under influent TC of 2 mg·L−1 and total nitrogen (TN) of 15 mg·L−1, the Fe-C-Mn system achieved average TC removal of 91.3%, significantly higher than the gravel control (27.2%). TN and nitrate nitrogen (NO3−-N) removals reached 71.7% and 83.3%, respectively, versus 7.8% and 1.2% in the control. Substrate analysis revealed increased surface roughness and synergistic generation of active components (Fe(II)/Fe(III) and Mn(II)), driving autotrophic denitrification and TC biodegradation/chemical degradation. Microbial community analysis indicated reduced overall diversity but selective enrichment of potential TC degraders (e.g., Trichosporon, Bacillota) and denitrifiers (e.g., unclassified_f_Rhodocyclaceae). TC degradation pathways included demethylation, hydroxylation, and ring-opening, ultimately yielding small metabolites. These findings provide theoretical and technical support for enhanced removal of antibiotics and nitrogen from secondary effluent using CWs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510017
Municipal solid waste (MSW) is a significant source of urban carbon emissions. This study integrates life cycle assessment (LCA) and system dynamics (SD) to construct a multi-subsystem LCA-SD model covering economy, population, waste generation, transportation, treatment, and resource utilization, using Fuzhou City as a case study. The model was validated against historical data and uncertainty analysis. Carbon emissions from MSW transportation, treatment, and resource utilization during 2013–2023 were calculated, and emission trends under seven reduction scenarios for 2024–2035 were predicted. Results show that Fuzhou's MSW treatment evolved through three stages: 'landfill+incineration', 'treatment structure adjustment', and 'incineration+kitchen waste resource utilization', corresponding to emission growth, fluctuation, and reduction periods. In 2023, total net carbon emissions were 1.07×10^6 t CO2-eq, with incineration being the largest contributor (9.93×10^5 t), followed by transportation (2.93×10^4 t), leachate treatment (2.14×10^4 t), and kitchen waste treatment (7.90×10^3 t, negative emission). Scenario analysis indicates that without further measures, carbon neutrality cannot be achieved. Synergistic enhancement of kitchen waste separation and incineration power generation efficiency can significantly boost reduction, potentially achieving carbon neutrality by 2032. The study provides a dynamic accounting and scenario assessment framework for low-carbon transition of urban solid waste systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012605
Synthetic phenolic antioxidants (SPAs) are widely used, leading to environmental contamination and human exposure. However, studies on their effects on adipocyte differentiation and underlying mechanisms, particularly for emerging SPAs, are limited. This study evaluated the impacts of 4-tert-octylphenol (4-t-OP) and three novel antioxidants (AO 3114, AO 1135, AO 702) on adipogenesis using the mouse 3T3-L1 preadipocyte differentiation model. Lipid staining, triglyceride measurement, differentiation-related gene expression analysis, and transcriptomic approaches were employed. All four SPAs significantly promoted differentiation of 3T3-L1 cells into mature adipocytes and upregulated expression of peroxisome proliferator-activated receptor gamma (Pparγ) and mature adipocyte marker genes. Transcriptomic analysis revealed differential effects on gene transcription during early differentiation. GO and KEGG enrichment analyses indicated that these SPAs promoted adipogenesis by enhancing energy metabolism and protein synthesis, as well as regulating PPAR and other signaling pathways. In conclusion, the tested SPAs promote adipogenesis and disrupt lipid metabolism through distinct mechanisms, suggesting long-term exposure may cause metabolic disorder risks and pose a public health threat.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608017
Carbon monoxide (CO) is a significant gaseous pollutant emitted during high-carbon ferrochrome (HCFeCr) production, yet measured emission factors for different furnace types remain scarce, hindering accurate emission inventories and pollution control assessments. This study addresses this gap by investigating four typical HCFeCr production facilities in Ulanqab, Inner Mongolia, China, comprising two semi-closed submerged arc furnaces (SAFs) and two closed SAFs. A hybrid methodology combining manual stack sampling and continuous emission monitoring system (CEMS) data was employed. A characteristic CO-to-NOx concentration ratio was established from manual measurements, which was then applied to continuous NOx data to estimate CO emissions and product-based emission factors. Results revealed substantial process-dependent variability: semi-closed SAFs (Facilities A and B) exhibited CO emission factors of 7.06 kg/t and 3.66 kg/t, respectively, whereas closed SAFs (Facilities C and D) with associated pelletizing processes showed notably lower factors of 1.41 kg/t and 0.51 kg/t. On average, semi-closed furnaces emitted approximately six times more CO per tonne of product than closed furnaces. Furnace sealing degree and raw material ratios were identified as key determinants. These findings underscore the inadequacy of using a single average emission factor for HCFeCr production and advocate for furnace-type-specific factors to improve emission accounting accuracy. This study provides essential measured data for developing refined CO emission inventories and supporting pollution reduction policies in the ferroalloy industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608026
Biochar and microbial inoculants are widely used for agricultural soil amendment. To investigate the effects of different straw biochars and Bacillus subtilis inoculant, applied individually or combined, on nitrogen transformation in dryland soil, a 60-day laboratory incubation experiment was conducted with six treatments: control (CK), 4% rice straw biochar (S), 4% rapeseed straw biochar (Y), 4% rice straw biochar plus 5 mg/kg inoculant (SJ), 4% rapeseed straw biochar plus 5 mg/kg inoculant (YJ), and inoculant alone (J). Results showed that rice straw biochar significantly increased soil nitrate nitrogen content by 148.74%–152.68% compared to CK, enhancing nitrification. Combined application with inoculant further increased average net nitrogen mineralization rate by 77.28%–99.38%. Conversely, rapeseed straw biochar decreased nitrate nitrogen by 51.66%–57.61%, and combined application reduced net nitrogen mineralization rate by 82.07%–84.73%. Treatments S, Y, SJ, and YJ promoted microbial biomass nitrogen (MBN) synthesis, with S and Y increasing MBN by 2.02- and 2.20-fold over CK, respectively. Combined treatments further increased MBN by 103.26%–149.44% relative to single biochar treatments. These findings indicate that biochar type governs nitrification and net nitrogen mineralization, while combined application exerts synergistic effects on MBN. For comprehensive dryland soil improvement, YJ treatment is optimal, reducing inorganic nitrogen loss risk and enhancing microbial nitrogen activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3998-8
Constitutional isomerism in covalent organic frameworks (COFs) has emerged as a powerful strategy to tailor material properties for photocatalytic applications. Here, we report the design and synthesis of two isomeric multicomponent COFs (MC-COFs) via Schiff-base condensation followed by Povarov reaction, converting imine linkages into quinoline structures. These isomeric MC-COFs exhibit opposing C=N bond orientations and distinct phenyl group alignments within the COF pores, leading to different torsion angles in the COF layers. Structural analyses reveal that enhanced planarity promotes π-π stacking and electron delocalization, resulting in favorable band structures and reduced exciton binding energies. Consequently, the optimized COF achieves a superior hydrogen peroxide (H2O2) production rate of 3128 μmol g−1 h−1 under visible light irradiation. This work underscores the critical influence of structural isomerism on the photocatalytic efficiency of MC-COFs and provides insights for rational design of high-performance COF-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4039-1
Immunosuppressive metabolites are major drivers of tumor immune suppression. Among these, kynurenine (Kyn) is produced through the catalysis of tryptophan (Trp) 2,3-dioxygenase (TDO) in hepatocellular carcinoma. However, TDO inhibition alone is often insufficient because residual pathway flux sustains the accumulation of the downstream immunosuppressive metabolite quinolinic acid (QA). Here, we propose a strategy to disrupt residual kynurenine pathway activity to enhance metabolism-driven tumor immunotherapy. We develop acid-responsive metal-organic complex nanoparticles (APAP@TDOi-Zn, ATZn) that integrate the TDO inhibitor (TDOi) and Zn2+, while encapsulating acetaminophen (APAP) to inhibit 3-hydroxyanthranilate 3,4-dioxygenase (HAAO), thereby limiting QA production and simultaneously suppressing the residual immunosuppressive metabolite. QA suppression limits M2 macrophage polarization, whereas Kyn inhibition and Zn2+ supplementation promote T cell proliferation and cytotoxicity. Consequently, ATZn rewires Trp-Kyn metabolism and augments antitumor immunotherapy. This work enhances the efficacy of metabolic checkpoint blockade and provides a strategy to overcome metabolism-driven immune resistance.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60692-5
Long persistent luminescence materials (LPLMs) have demonstrated significant potential in photo- and electro-catalysis due to their unique capability of storing and controllably releasing photogenerated charge carriers. These materials offer innovative solutions for environmental remediation and sustainable energy technologies. This review systematically summarizes recent advances in the application of LPLs in photo- and electro-catalysis, outlining their developmental history and underlying mechanisms. Emphasis is placed on their applications in organic pollutant degradation, photocatalytic hydrogen evolution, and photovoltaic cells. Furthermore, design strategies and research frameworks for LPLs are discussed. The current limitations and challenges in this field are examined, and future research directions are proposed to facilitate the transition of LPLMs from fundamental research to practical applications in energy and the environment. Key materials such as SrAl2O4:Eu2+,Dy3+ exhibit afterglow lasting up to 30 hours, enabling round-the-clock catalytic activity. Composite systems like g-C3N4@Au@SrAl2O4:Eu2+,Dy3+ and Cu|CuO/SrAl2O4:Eu2+,Dy3+ have achieved efficient degradation and simultaneous hydrogen evolution. Z-scheme heterojunctions, e.g., Sr2MgSi2O7:Eu2+,Dy3+/Ag3PO4, demonstrate enhanced performance. The review highlights the potential of LPLMs to overcome the limitation of intermittent light sources, providing a pathway for continuous catalytic processes.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60667-6
The introduction of an appropriate amount of Cu effectively enhances the catalytic performance of ZnO-ZrO2 solid solution catalysts in CO2 hydrogenation to methanol. However, systematic studies on the effect of Cu content in ZnO-ZrO2 solid solution catalysts remain limited. In this work, a ZnO-ZrO2 solid solution and a series of Cu/ZnO/ZrO2-x catalysts (x = 0.3, 0.7 and 0.9, denoting the molar ratio of Cu/(Cu+Zn+Zr)) were prepared by co-precipitation method. Among these catalysts, the Cu/ZnO/ZrO2-0.7 catalyst exhibited the optimal catalytic performance, with a space-time yield of methanol (162.7 g/(kg·h)) that was 6.6 times higher than that of the ZnO-ZrO2 solid solution catalyst (24.8 g/(kg·h)) at 250 °C. Structural characterizations reveal that the introduction of an appropriate amount of Cu led to the coexistence of a solid solution and individual metal oxides, and promoted the formation of medium-strength basic sites. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results further confirm that Cu introduction facilitated the conversion of key reaction intermediates. This work provides a systematic investigation of the influence of Cu content on the methanol synthesis performance of ZnO-ZrO2 solid solution catalysts and elucidates the promotional mechanism induced by Cu incorporation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4146-8
The conventional trial-and-error approach for the research and development (R&D) of high-performance super-hydrophilic coatings presents long-standing challenges, including data scarcity, unclear structure-activity relationships, and lack of design guidelines. In this study, an innovative multi-model framework that synergistically integrates a specialized polymer large language model (PolyLLM) and a polymer machine learning model (PolyML) for intelligent R&D of super-hydrophilic coating systems is designed and demonstrated. During the hydrophilic polymer research phase, the multi-model leverages the domain-specific insights and chemical tool capabilities of the fine-tuned PolyLLM to systematically screen 852 hydrophilic monomers and generate 3880 hypothetical polymer architectures. By utilizing the PolyML, the multi-model enables precise performance predictions and quantitative evaluations of feature importance to facilitate efficient high-throughput screening of optimal structures from the generated polymer database. Experimental validation confirms that the multi-model achieves a mean absolute error (MAE) below 10% across various polymer property prediction tasks compared to experimental data. This approach leads to the rapid discovery of hydrophilic polymers with exceptional anti-swelling and wear-resistance. In developing super-hydrophilic coatings, the multi-model effectively combines PolyLLM's guidance for large-scale synthesis with PolyML's capabilities for precise formulation optimization and curing parameter adjustments. The effectiveness of multi-model is demonstrated by the accelerated development of high-performance anti-fogging coatings for swim goggles and optical films with outstanding water- and wear-resistance that significantly outperform leading commercial products. This multi-model offers a flexible approach for advanced polymer coatings, leading to a seamless connection between laboratory research and industrial development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4118-0
Polymer composite dielectrics are key materials for high-temperature film capacitors, yet their energy storage capability is severely constrained at elevated temperatures. Molecular fillers that simultaneously integrate deep-level trapping (high electron affinity, Ea), strong insulation (large bandgap, Eg), and high thermal stability are rarely available, posing a major challenge for improving high-temperature energy storage performance. To address this challenge, we screen and identify hexaazatriphenylene hexacarbonitrile (HAT-CN) as a promising candidate that fulfills the above critical requirements from numerous commercial organic molecules. When incorporated into a high glass transition temperature (Tg) polymer fluorene polyester (FPE), the resulting all-organic composite exhibits simultaneously suppressed high-temperature conduction loss and preserved mechanical robustness. Consequently, the optimized composite achieves record-high discharged energy densities of 7.31 J cm−3 at 150 °C and 6.14 J cm−3 at 200 °C (η≥90%) with a low cost and scalable process. This work demonstrates that the filler design based on synergistic key properties provides a potent pathway to break the longstanding high-temperature performance bottleneck in polymer dielectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4125-8
Perovskite solar cells (PSCs) require advanced interfacial modification materials to mitigate defects and ion migration that limit efficiency and stability. This study presents a low-cost, highly efficient screening methodology based on density functional theory (DFT) calculations to identify superior interface modifiers. The effectiveness of this method is experimentally validated. Methyl 1H-1,2,4-triazole-3-carboxylate (TZMC) is screened as a superior molecule that simultaneously passivates perovskite defects and suppresses ion migration through a synergistic effect: coordination with Pb2+ via carbonyl oxygen and imidazole nitrogen, and stabilization of I− via N–H···I hydrogen bonding. This mechanism reduces non-radiative recombination, enhancing both open-circuit voltage (VOC) and fill factor (FF). TZMC-modified PSCs achieve a champion power conversion efficiency (PCE) of 25.44% and significantly improved operational stability under continuous illumination and resistance to water/oxygen. Comprehensive characterization confirms reduced defect density and increased ion migration barriers. This work demonstrates the success of DFT-guided design in advancing interfacial modification materials for high-performance PSCs, transforming interface engineering from trial-and-error to rational design and providing a framework for high-throughput screening.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4123-0
Aqueous aluminum-ion batteries (AAIBs) are promising for large-scale energy storage due to safety, sustainability, and theoretical high capacity. However, sluggish electron/ion transport in conventional cathodes limits rate capability. Here, we first propose high-entropy engineering of metal oxides (HEOs) as cathodes in AAIBs, leveraging the 'cocktail effect' and abundant electron transport pathways to enhance rate-capacity. Atomic-level interactions between different metal atoms broaden the d-band with reduced electronic level degeneracy, facilitating rapid electron transport, achieving one of the best rate capabilities (119.4 mAh g−1 at 10.0 A g−1) among metal-oxide cathodes. The disordered layered oxides formed with a high-entropy framework alleviate electrostatic repulsion between aluminum ions and the fixed lattice, mitigating structural degradation and imparting excellent cycling stability (over 95.1 mAh g−1 after 500 cycles at 2.0 A g−1). The optimized HEO-Cr cathode (Fe0.6Co0.6Ni0.6Mn0.6Cr0.6O4) exhibits outstanding rate performance and cycling stability. DFT simulations and electrochemical tests reveal that multi-transition metal incorporation, bandgap narrowing, and unique lattice structure drastically enhance electron transport efficiency. The layered phase formed after cycling, based on a high-entropy framework, overcomes challenges from high charge density aluminum ions, significantly enhancing cycling stability. This work paves the way for high-performance AAIBs and other aqueous multivalent metal ion batteries by rationally designing high-entropy engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4150-2
Bacterial infection and irregular wound morphology are major challenges in clinical wound management. Injectable hydrogels can conform to irregular wound geometries but often lack antimicrobial activity. Here, we report an injectable hydrogel (HPAu gel) formed by sequentially mixing phenylboronic acid-modified hyaluronic acid (HA-PBA) and chloroauric acid under alkaline conditions. The gel's internal multiple crosslinks enable uniform encapsulation of in situ-generated gold nanoparticles. Hydrogen bonds and phenylboronic acid ester bonds confer self-healing, injectability, and adhesion, allowing effective sealing of irregular cavities. In vitro, the hydrogel exhibits long-lasting photothermal stability and eliminates multiple bacterial strains. In a mouse dorsal full-thickness infected wound model, HPAu gel under near-infrared (NIR) irradiation eradicated Staphylococcus aureus, reduced inflammation (TNF-α fluorescence area significantly lower; IL-10 area 12.88‰ vs <2‰ in Blank), promoted vascular regeneration (CD31 and α-SMA expression increased), and accelerated wound healing. This work presents a promising strategy for treating irregular infected wounds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4216-7
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are promising for lightweight and mechanically pliable photovoltaics, yet their performance is limited by severe non-radiative recombination and residual stress. Here, we report a sealed constant temperature (SCT) annealing strategy that simultaneously optimizes the CZTSSe/CdS heterojunction and alleviates stress. Under uniform mild thermal conditions (85°C, 5 h), SCT annealing promotes gradient diffusion of Cd2+ into the absorber, partially substituting Zn2+, which optimizes band alignment, passivates interface defects, and suppresses near-interface CuZn defects. This reduces open-circuit voltage loss and improves fill factor. The flexible device achieves a power conversion efficiency of 13.07%, a significant improvement over the reference (12.1%). The SCT strategy also enhances mechanical flexibility by reducing residual stress. Our findings provide a controllable route to advance both efficiency and flexibility of flexible CZTSSe solar cells.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4169-9
Transition metal fluorides (TMFs) are promising cathode materials for lithium-ion batteries (LIBs) due to their high theoretical capacity and energy density, yet their practical application is hindered by low utilization rates stemming from particle sizes exceeding the effective Li+ transport distance (<20 nm). This work introduces a multiphase metal fluoride composite (MMFC) synthesized via a hydrothermal method, leveraging high-entropy concepts and interface engineering to enhance electrochemical performance. The MMFC, after annealing at 400°C (MMFC-400), exhibits high specific capacity, excellent rate capability, and cycling stability. The multiphase interfaces accelerate Li+ migration kinetics and provide additional active sites, addressing the limitations of conventional TMF cathodes. This study proposes a multiphase interfacial energy storage strategy for advanced TMF cathodes, offering a pathway to high-performance LIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4229-6
The escalating retirement of lithium-ion batteries (LIBs) necessitates efficient recycling technologies to recover cathode materials, particularly lithium iron phosphate (LFP), which dominates the traction battery market. Conventional pyrometallurgical and hydrometallurgical methods are energy-intensive and environmentally burdensome. Here, we report a fluorine doping-assisted direct regeneration strategy for spent LFP (SLFP) cathodes, yielding a regenerated LFP-F (RLFP-F) with a hybrid structure of ordered crystalline and disordered domains. Fluorine doping reduces the Li+ diffusion energy barrier, as evidenced by density functional theory calculations, and strengthens Fe–O bonding, suppressing Fe migration and anti-site defect formation. The O 2p band center shifts downward, increasing the Fe 3d–O 2p energy separation from 3.23 eV in pristine LFP to 3.46 eV in RLFP-F, enhancing structural stability and electronic conductivity. Electrochemical tests demonstrate that RLFP-F delivers a high-rate capability and excellent cycling stability. Life-cycle assessment reveals that direct regeneration consumes only 9.986 MJ kg−1 and emits 0.324 kg CO2-equivalent per kg of cell, significantly outperforming pyrometallurgy and hydrometallurgy. Economic analysis based on 2025 Chinese market prices indicates a net profit of $397.15 per ton of SLFP battery recycling, attributed to the closed-loop cathode-to-cathode design. This work provides a sustainable and economically viable route for upcycling spent LFP batteries.