SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4467-x
Conventional eye-movement interaction systems depend on video capture, infrared tracking, and image recognition, which impose inherent constraints on accuracy, response latency, and stability. This study introduces an eyelash-guided signal interaction system based on a triboelectric nanogenerator (PF-TENG) using PDMS-FDTS thin films. The system employs eyelash movements as interactive inputs, eliminating the need for complex optical acquisition devices. A CNN-LSTM hybrid neural network classifies distinct eyelash movement patterns with a classification accuracy exceeding 98.5%. The PF-TENG device exhibits ultra-flexibility and transparency, enabling seamless integration onto eyeglasses without obstructing the user's field of view. Experimental validation demonstrates real-time monitoring of ocular states for driving fatigue detection, accurately identifying fatigue signs and enhancing application potential in intelligent driving. The system offers a natural, comfortable input modality and significant advantages for human-machine interaction, with broad prospects in eye-movement control and intelligent transportation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4351-8
Breaking intrinsic structural symmetry is a fundamental prerequisite for pronounced nonlinear optical responses. Low-symmetry semiconductors with inherent anisotropy enable self-powered optoelectronic conversion and polarization-sensitive functionalities. This work reports the synthesis of low-dimensional van der Waals chain TeSe2 crystals with intrinsic inversion and C3 symmetry breaking. Angle-resolved polarized Raman spectroscopy and second-harmonic generation measurements confirm crystalline anisotropy and nonlinear optical performance. Electrical transport studies reveal p-type conduction with a room-temperature field-effect mobility of 122 cm2 V-1 s-1. The TeSe2 photodetector achieves self-powered detection and linearly polarized light detection across 405–1064 nm, with a photoresponsivity of 77.3 mA/W at 532 nm. The linear photogalvanic effect response is effectively modulated by gate voltage. Density functional theory calculations attribute p-type doping to Te and Se vacancies, while the nonlinear optical origin is linked to strong Berry curvature. Applications in polarization encoding communication and polarization imaging are demonstrated, indicating potential for low-energy-consuming, highly sensitive, on-chip integrated linear polarized photodetectors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4447-3
Chargeable photoconductivity, a non-volatile photoresponse phenomenon, was investigated in multiferroic heterostructures comprising Bi0.85La0.15FeO3 (BLFO) and a quasi-two-dimensional electron gas (Q2DEG). Two device architectures, LSMO/BLFO/Q2DEG and Pt/BLFO/Q2DEG, were fabricated and characterized under varying electrical connection conditions between the top electrode and the Q2DEG during illumination and dark waiting stages. Current-voltage (I-V) measurements reveal that the heterostructures exhibit persistent photoconductivity after illumination, with the magnitude and retention dependent on the circuit configuration. Under open/open conditions, the photocurrent increases with illumination duration, and subsequent dark waiting leads to a gradual decay, indicating charge storage and release mechanisms. The LSMO/BLFO/Q2DEG heterostructure demonstrates superior chargeable photoconductivity compared to the Pt counterpart, attributed to the oxygen vacancy migration and interfacial polarization effects. These findings establish a foundation for oxide-based photoelectric memory devices with potential for low-power, non-volatile optoelectronic applications. The results provide critical insights into the interplay between ferroelectric polarization, oxygen vacancy dynamics, and charge trapping at the BLFO/Q2DEG interface, offering a pathway for designing advanced multiferroic optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4381-5
Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4159-y
The electrocatalytic oxidation of ethylene glycol (EG) derived from polyethylene terephthalate (PET) waste to valuable glycolic acid (GA) represents an attractive route for waste resource upcycling. However, achieving high selectivity remains challenging due to the difficulty in steering the complex reaction pathway. In this study, PdPtCuInBi high-entropy intermetallic metallene (HEI-PdPtCuInBiene) is reported to precisely control EG oxidation reaction (EGOR) pathway for GA production by constructing multiple active sites at the atomic scale. In PET hydrolysate, it achieves a Faradaic efficiency of 99.87% and a production rate of 1.47 mmol h−1 cm−2, along with excellent stability. Mechanistic studies reveal that the high-entropy structure induces strong p-d orbital hybridization, which optimizes the electronic structure of active sites, thus weakening the adsorption of key carbonyl intermediates and suppressing C–C bond cleavage. The synergistic electronic effect among Pd, Pt, and Cu further enables differential adsorption of distinct intermediates on diverse active sites, enhancing the selective formation of GA. Techno-economic analysis exhibits high profitability (~$784.9 t−1 PET) of this route, demonstrating the great potential of high-entropy intermetallic metallene in regulating electrocatalytic upcycling of PET waste and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3607-9
Enhancing light olefin selectivity and extending catalytic durability remain critical challenges for ZSM-5 zeolites in methanol-to-olefins (MTO) conversion, primarily due to inherent diffusion restrictions along the MFI b-axis and poor coke accommodation. Here, we report a hierarchically single-crystalline ZSM-5 sheet architecture featuring interconnected multiscale porosity and a remarkably reduced b-axis thickness (<50 nm), quantitatively verified by three-dimensional electron tomography. Real-time confocal laser scanning microscopy tracking demonstrated significantly enhanced molecular diffusivity compared to conventional micron-sized ZSM-5 (Micro-ZSM-5). This engineered structure distributes abundant aluminum sites on highly accessible diffusion pathways, achieving an enlarged coke accommodation of 16.31 wt% with a coke deposition rate of 0.59 mg g−1 h−1, only one third of that in Micro-ZSM-5. In continuous MTO operation, the hierarchical ZSM-5 sheet (Hier-ZSM-5-S) maintained an average ethylene and propene selectivity of 63.5% for 22.2 hours (WHSV = 3.6 h−1, T = 480°C), which was 19% higher and 6.5 times longer than Micro-ZSM-5, respectively. This hierarchically shortened b-axis structure establishes a generalizable paradigm for enhanced diffusion and coke accommodation in precisely designed pore systems, applicable to various reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3582-9
Perovskite quantum dots (PQDs) hold great potential for brain-like neuromorphic computing. However, the development of PQDs-based synaptic devices is hindered by interfacial defects and limited stability. Here, we demonstrate a high-performance Cs2AgBiBr6 QDs/organic single crystal heterojunction synaptic device, fabricated via a novel space-confined vertical growth technique combined with a polymer-free transfer process. Vertically grown organic single crystals enable superior carrier mobility and facilitate the formation of low-defect interfaces with PQDs. The heterojunction exhibits remarkable photosensitivity (7.22 × 10^5 at 425 nm) and detectivity (2.15 × 10^15 Jones), owing to the strong optical absorption of PQDs coupled with the superior charge transport characteristics of organic single crystals. Notably, the device achieves dual-functional light adaptation, emulating synaptic behaviour under blue light while exhibiting photo-switching under green/red light. This unique capability enables smart blue-light hazard protection. This work not only provides a versatile platform for high-performance PQDs-based synaptic devices but also advances the development of brain-inspired neuromorphic systems for next-generation computing and intelligent sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3564-9
Sluggish water dissociation kinetics in the alkaline hydrogen evolution reaction (HER) hamper its practical production. Here, a heterojunction electrocatalyst featuring Ru-Ni(OH)2 interfaces on nickel foam (NF) with self-engineered built-in electric fields (BIEF) was synthesized via a simple in situ galvanic replacement reaction. The hierarchical Ru-Ni(OH)2/NF exhibits a record overpotential of 9.6 mV at 10 mA cm−2 for alkaline HER, surpassing most reported catalysts and commercial Pt/C. It also shows exceptional activity for hydrazine oxidation reaction (HzOR) at 100 mA cm−2 with a remarkably low potential of ca. 0.015 V vs. RHE. The assembled overall hydrazine splitting (OHzS) system integrating HER and HzOR requires a cell voltage of about 0.09 V to reach 50 mA cm−2, which is 1.637 V lower than the corresponding overall water splitting (OWS) device. Systematic analysis and calculation reveal that the BIEF induces redistribution of interfacial electrons for Ru, facilitating H2O dissociation and intermediate conversion, delivering ultra-high electrocatalytic performance. This work provides an avenue for design and preparation of electric field-mediated catalysts towards sustainable energy conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3672-8
Pore-tuning engineering is an effective strategy for designing catalysts for energy storage and conversion. Here, we report a rhombic dodecahedral iron and nitrogen co-doped carbon (Fe-N-C) material with hierarchical micro-mesoporous structures, synthesized using mesoporous silica as both pore template and iron source. The resulting catalyst (m-Fe/NC) exhibits significantly enhanced oxygen reduction reaction (ORR) activity, with half-wave potentials of 0.81 V and 0.88 V in acidic and alkaline media, respectively. When employed as a cathode in zinc-air batteries, m-Fe/NC delivers a superior specific capacity of 815 mAh g_Zn^-1 and a stable cell voltage of 1.31 V at a current density of 10 mA cm^-2. Advanced characterization and theoretical calculations reveal that the mesoporous structure not only increases active site exposure but also induces a curvature-induced strain effect on concave surfaces, which enhances intrinsic activity. This work provides insights for developing innovative nanoporous electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3807-8
Electrocatalytic co-reduction of CO2 and nitrate offers a sustainable route for urea synthesis, valorizing nitrogenous waste and CO2. However, achieving high-performance urea electrosynthesis under ambient conditions remains challenging due to the need for simultaneous activation of CO2 and efficient H2O dissociation to supply active *H for *NOx hydrogenation, ultimately forming key C- and N-containing intermediates for C–N coupling. Here, we report a bifunctional Pd-single-atom-modified Cu (Pd1Cu) nanorod catalyst that synergistically promotes adsorption and stepwise activation of CO2 and H2O, steering the reaction pathway toward selective urea synthesis. Integrating experimental evidence, in situ spectroscopy, and computational analyses, we disclose that atomically dispersed Pd sites kinetically favor co-generation of *CO and *NH2 via H2O dissociation-driven proton transfer, forming an optimal intermediate balance. The dual metal active sites enhance C–N coupling via combined electronic and geometric effects, substantially lowering the reaction energy barrier and improving selectivity. This work provides a rational design strategy for advanced multifunctional catalysts for urea electrosynthesis, contributing to carbon neutrality and waste nitrogen valorization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3815-0
The development of bifunctional electrocatalysts capable of integrating biomass-derived platform molecule oxidation with organic reduction offers a promising strategy for simultaneously enhancing energy efficiency and generating high-value chemicals. However, designing catalysts that exhibit both high activity and stability in integrated systems remains a significant challenge. Herein, we report a self-supported electrode composed of nitrogen-doped carbonized wood (NCW) supported NiCo nanosheets (NiCo 0.3/NCW) that enables the electrocatalytic 5-hydroxymethylfurfural oxidation to produce 2,5-furandicarboxylic acid (FDCA) and the nitrobenzene reduction to yield aniline in an integrated electrochemical cell. The NiCo 0.3/NCW electrode achieves the production of FDCA and aniline at a low cell voltage of 1.7 V, with ~99% anodic and ~92% cathodic Faradaic efficiencies, respectively. Experimental characterizations disclose that the hierarchical porous NCW architecture promotes the dispersion of active sites, while nitrogen doping strengthens metal–support interactions. In-situ spectroscopic experiments combined with density functional theory (DFT) calculations reveal that cobalt incorporation tunes the electronic structure of nickel, thus optimizing substrate and intermediate adsorption, and lowering energy barriers. These effects ultimately enhance the performance of the natural wood-derived catalyst in integrated biomass valorization and selective organic electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3678-1
Reed membrane, a natural cellulosic material traditionally used in musical instruments, holds promise in flexible electronics due to its abundance, low cost, and excellent biocompatibility. However, its native form contains water-soluble ions and lipid-soluble waxes that hinder performance in acoustic and electronics by compromising electrical insulation and mechanical stability. Here, supercritical fluid superposition purification (SCSP-WA) is introduced, which utilizes supercritical CO2 with water and acetone as bipolar co-solvents to selectively remove these impurities. Post-SCSP-WA treatment, the reed membrane exhibits significant enhancements in mechanical strength and electrical insulation, achieving a 4-fold increase in elongation at break, improved tensile strength and Young’s modulus, and a 98.5% reduction in leakage current, all while maintaining low and stable capacitance. These improvements stem from the restructuring of the fibrous network into a porous, interconnected microstructure. Material characterization (X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM)) confirmed the effective removal of magnesium and waxy functional groups, along with enhanced fiber crosslinking. Cytotoxicity tests further validated the biocompatibility of the SCSP-WA-treated membranes. This environmentally sustainable approach expands the potential of reed membranes in flexible bioelectronics and bio-integrated acoustic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3760-y
Layered chalcogenide compounds have attracted considerable attention for optoelectronic applications due to their rich structural diversity and unique physical properties, including high carrier mobility, ferromagnetism, ferroelectricity, and outstanding optoelectronic and thermoelectric performance. Their tunable bandgaps and strong light absorption render them highly suitable for next-generation photodetectors. However, the environmental instability of many 2D chalcogenides poses a critical challenge for practical applications. In this work, we report a high-performance, polarization-sensitive photodetector based on an air-stable ternary chalcogenide FeIn2Se4. Angle-resolved polarized Raman spectroscopy reveals that the four characteristic Raman modes exhibit a 60° periodic variation in intensity, highlighting the material's pronounced in-plane anisotropy. Benefiting from its strong absorption over a broad spectral range (510–1028 nm), the FeIn2Se4-based device demonstrates reliable photoresponse under multiple excitation wavelengths (405, 473, 515, and 638 nm), showcasing its wideband detection capabilities. Furthermore, XPS measurements after prolonged air exposure confirm the enhanced chemical stability of FeIn2Se4 compared to binary chalcogenides. These findings demonstrate that 2D ternary FeIn2Se4 is an excellent candidate for advanced anisotropic optoelectronic devices, offering broadband photodetection, robust polarization sensitivity, and excellent environmental resilience.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507085
This study investigates the spatiotemporal differentiation of suspended particulate matter (SPM) characteristics, sources, and their impacts on water quality between the Middle Route (closed artificial channel) and East Route (open natural water system) of the South-to-North Water Diversion Project. Thirty sampling sites (13 on the Middle Route, 17 on the East Route) were established, and samples were collected during dry and wet seasons. Water quality parameters and SPM characteristics were analyzed, including particle size distribution, total suspended solids (TSS), chlorophyll a, and stable carbon and nitrogen isotopes. Results show that the Middle Route maintains good and stable water quality, with SPM dominated by coarse particles (>63 μm, 61.43%–94.68%), total phosphorus (TP) <0.01 mg·L−1, and a significant positive correlation between chlorophyll a and coarse particles (r=0.60), indicating algal aggregation dominates particle formation. In contrast, the East Route exhibits high and fluctuating nitrogen and phosphorus concentrations, with SPM dominated by fine particles (<20 μm, 51.26%–88.61%), TP ranging from 0.03 to 1.11 mg·L−1, and a positive correlation with fine particles, suggesting significant external inputs. Carbon and nitrogen isotope analysis reveals that Middle Route SPM primarily originates from autochthonous algae (contribution >46.75%), while East Route SPM is influenced by both terrestrial C3 plants and algae. The distinct engineering and management approaches of the two routes lead to significant differences in SPM characteristics and sources, thereby affecting water quality dynamics. The Middle Route requires an 'algal reduction and hydrodynamic optimization' strategy to control algal-derived coarse particle deposition, whereas the East Route benefits from 'retention-sedimentation and wetland purification' to reduce external fine particles and pollutant inputs. This research provides theoretical support and practical guidance for differentiated SPM management in long-distance water diversion systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604010
Guar gum production wastewater contains 1,2-propanediol, which in conventional anaerobic treatment causes propionate accumulation and microbial inhibition. Microaerobic conditions foster fermentative bacterial metabolism, enhancing organic substrate conversion, while biochar promotes anaerobic microbial aggregation and oxygen tolerance. This study treated actual guar gum wastewater using three configurations: blank control, anaerobic, and microaerobic-biochar (O2/BC) coupled systems. Under mesophilic conditions (37 °C), with micro-aeration at 0.2 mL/(g VS·d) and biochar dosage of 15 g/L, the O2/BC system achieved a COD removal efficiency of 90%, 10.6 percentage points higher than the anaerobic control. Effluent COD and propionate concentrations dropped to 3800 mg/L and 0.15 g/L, respectively, representing reductions of 49.6% and 98.4% versus the control. Biogas production was 1.64 times that of the control, with a maximum methane concentration of 77.2%. Fourier transform infrared spectroscopy (FT-IR) indicated increased abundance of –OH, –CH2–, and C–O functional groups on sludge surfaces, revealing biochar's adsorption enhancement. Scanning electron microscopy (SEM) showed dense microbial aggregates dominated by long bacilli, distinct from conventional anaerobic sludge. Microbial community analysis revealed increased abundance of Clostridium and Comamonas, modulating the propionate-to-acetate ratio and optimizing acidification efficiency, thereby promoting complex organic degradation. This study provides a novel technical pathway for biological treatment of alcohol-rich organic wastewater.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604023
Fly ash, a byproduct of coal combustion, poses severe environmental challenges. This study synthesizes A- and H-type zeolites from fly ash via hydrothermal treatment and evaluates their adsorption performance for low-concentration acidic gases (SO2, CO2, NO) at 1000 mg/m3. The zeolites exhibited pore sizes of 3–5 nm, with specific surface areas of 18.59 m2/g (A-type) and 22.32 m2/g (H-type). At 20 °C, A-type zeolite achieved maximum saturated adsorption capacities of 1.07 mmol/g for SO2, 0.26 mmol/g for CO2, and 0.048 mmol/g for NO; H-type zeolite showed higher capacities: 1.12, 0.29, and 0.053 mmol/g, respectively. In-situ DRIFTS revealed that T–O (T=Si/Al) groups serve as key active sites, with adsorption energies for A-type zeolite calculated as -5.11 kJ/mol (SO2), -4.07 kJ/mol (CO2), and -1.41 kJ/mol (NO). Kinetic analysis indicated conformity to the Arrhenius equation. The results demonstrate that fly ash-based zeolites are promising adsorbents for acidic gas removal, with H-type outperforming A-type due to larger surface area and more silanol sites. This work provides a theoretical basis for utilizing fly ash in gas purification, contributing to the circular economy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3857-1
High-Be Cu-Be alloys exhibit dendritic segregation and brittle β/γ phases, complicating processing and applications. This study investigates the influence of cooling path on eutectoid transformation, microstructure, and mechanical properties in Cu-2.8Be and Cu-3.8Be alloys. A two-step homogenization treatment effectively eliminates segregation and suppresses the formation of harmful acicular phases. Diffusion-kinetic and thermodynamic analyses demonstrate that both the initial temperature and cooling rate determine eutectoid morphology and extent. Crystallographic and Eshelby-based analyses reveal that the β → γ transformation involves an isotropic contraction of ~3.9%, producing much lower strain energy than the anisotropic β → α transformation (~28.5% expansion and ~9.2% contraction), thus explaining the preferential nucleation of γ. Rapid cooling promotes incomplete eutectoid decomposition along grain boundaries, forming fine α/γ lamellae with interlamellar spacing down to ~7 nm. Lattice strain analysis confirms considerable distortions at α/γ interfaces (ε_xx = 0.0167, ε_yy = 0.0095). The mechanical incompatibility and high internal strain at these interfaces cause stress concentration and crack initiation. This work establishes a process-microstructure-property-mechanism framework essential for controlling the performance of high-Be Cu-Be alloys.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3634-0
Messenger RNA-lipid nanoparticle (mRNA-LNP) vaccines have demonstrated extraordinary efficacy against severe acute respiratory syndrome coronavirus 2, establishing LNPs as the premier platform for mRNA therapeutics. However, the pervasive presence of anti-polyethylene glycol (PEG) antibodies undermines PEGylated LNP performance by diminishing therapeutic efficacy. To address this challenge, we synthesized a panel of lipid-poly(2-oxazoline) (lipid-POx) conjugates as alternatives to lipid-PEG and systematically evaluated how their polymer backbone, degree of polymerization, and lipid tail structure influence LNP physicochemical properties and mRNA delivery performance. Among POx-LNPs formulated with heptadecan-9-yl 8-((2-hydroxyethyl)(6-oxo-6-(undecyloxy)hexyl)amino)octanoate (SM-102) as the base lipid, those constructed with single-tailed C18-POx exhibited smaller particle sizes and superior freeze-thaw stability. These C18-POx-LNPs maintained comparable in vivo transfection efficiency to PEG-LNPs even when fully replacing 1,2-dimyristoyl-sn-glycero-3 (DMG)-PEG. Notably, in mice bearing pre-existing anti-PEG antibodies, C18-POx-LNPs demonstrated over 200-fold higher transfection efficiency than PEG-LNPs. Additionally, repeated administration of POx-LNPs induced dose-dependent anti-POx immunoglobulin M (IgM) and IgG responses, with antibody titers inversely correlated with POx hydrophilicity. This study underscores the effectiveness of substituting PEG with POx in LNP construction to address the transfection efficiency in populations with pre-existing anti-PEG antibodies, and would inspire the development of more hydrophilic polymers for LNP formulation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506084
Groundwater is a vital drinking and irrigation source in the loess regions of northwestern China. In Guyuan, a densely populated area in southern Ningxia, systematic assessments of groundwater pollution risks are lacking. This study collected 60 groundwater samples and employed the Nemerow index, heavy metal pollution index (HPI), and health risk assessment models to evaluate pollution levels and health risks of eight elements including Cr, As, and Hg. Results show that the groundwater is generally Class IV quality, with a mean TDS of 1350.9 mg·L−1. Average concentrations of As, Cr, and Mn are 4.39, 29.87, and 45.77 μg·L−1, respectively. The Nemerow index indicates moderate pollution. The mean HPI is 10.56, but a local sample (PS1-51-下) reaches 36.15, indicating severe pollution. Health risk assessment reveals that carcinogenic risks from Cr and As for adults and children are 8.037×10−6 a−1 and 3.863×10−6 a−1, respectively, below US EPA limits but above recommended levels by Swedish and Dutch agencies, with children at higher risk. Hydrogen and oxygen isotopes and principal component analysis suggest that groundwater is primarily recharged by atmospheric precipitation. Cr, Zn, and Mn mainly originate from regional copper ore belts, coal mining, and agricultural activities. This study fills a gap in multidimensional groundwater assessment in populated loess areas, identifies pollution characteristics distinct from typical loess regions, and provides a scientific basis for regional water resource risk management and sustainable development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3993-y
Conventional liquid-phase in-situ synthesis of Cu-TiB2 composites often suffers from coarse and non-uniformly distributed reinforcements, stemming from insufficient understanding and control over the in-situ nucleation and growth mechanisms of TiB2 particles. This study introduces a novel melt dispersion-turbulent mixing (MDTM) in-situ reaction technology to fabricate high-performance Cu-TiB2 composites. The MDTM strategy synergistically refines reaction micro-regions by reducing the initial melt droplet size via melt dispersion while enhancing solute convection via turbulence, promoting high-density nucleation and refinement of TiB2 particles. Based on turbulence characteristics and in-situ reaction kinetics, we optimized the melt disperser parameters and established a quantitative model linking particle size to disperser rotation speed and reactant solute concentration. It was found that disperser rotation speed governs three distinct nucleation and growth mechanisms for TiB2 particles. Low-density nucleation at low disperser rotation speeds (0–50 r/min) leads to coarse TiB2 particles. At medium rotation speeds (100–150 r/min), the refinement of micro-regions in the dual-melt reaction achieves high-density TiB2 nucleation. Conversely, at high rotation speeds (150–200 r/min), intense turbulence weakens the nucleation driving force and induces TiB2 particle coarsening. This work provides new insights into liquid-phase in-situ reaction mechanisms and offers a novel, controllable route for fabricating high-performance micro/nano particle-reinforced metal matrix composites.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3833-1
Developing plasmonic nanomaterials with compositions beyond noble metals is crucial for expanding their applications. Transition metal nitrides, such as titanium nitride (TiN), exhibit excellent plasmonic optical properties and photothermal conversion efficiency, showing promise in catalysis, photothermal therapy, and seawater desalination. However, the structure-property relationship governing their plasmonic optical properties remains unclear. Here, we constructed Au@TiN core-shell nanostructures and systematically investigated the tunability of their geometry, composition, and optical properties. By varying the Au core size and TiN shell thickness, we achieved precise control over the localized surface plasmon resonance (LSPR) from visible to near-infrared wavelengths. Single-particle scattering spectroscopy revealed distinct plasmon hybridization modes, with experimental spectra matching theoretical simulations. The Au@TiN nanostructures exhibited enhanced photothermal conversion efficiency (η = 78.5%) under 808 nm laser irradiation, significantly outperforming pure TiN nanoparticles (η = 45.2%). This work demonstrates multi-factor control over plasmonic effects in TiN, providing insights for designing TiN-based plasmonic nanomaterials for catalysis and sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3763-9
Developing near-infrared (NIR) organic phototheranostic agents with aggregation-induced emission (AIE) is crucial for precise diagnosis and synchronous cancer treatment by regulating excited-state energy dissipation. However, the distorted molecular configuration of AIE systems poses a challenge to achieving both high fluorescence quantum yield (QY) and large molar extinction coefficient (ε). Herein, a series of donor-acceptor-donor (D-A-D) AIE small molecules with bright NIR emission and high photothermal conversion efficiency (PCE) were developed through an acceptor planarization and donor rotation molecular engineering strategy. Upon encapsulation into water-dispersible nanoparticles (NPs), SVD NPs exhibited strong molar absorptivity (ε = 3.92 × 10^4 M^-1 cm^-1), high QY of 4%, and improved photothermal performance (PCE × ε = 2.2 × 10^4), enabling effective NIR fluorescence imaging-guided phototherapy for successful ablation of subcutaneous tumors. This study offers valuable insights into the simultaneous enhancement of bright NIR luminescence and exceptional photothermal performance in AIE phototheranostic agents, propelling advancements in tumor diagnosis and treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509049
This study systematically compared three virus enrichment and concentration methods—polyethylene glycol (PEG) precipitation, aluminum salt coagulation, and centrifugal ultrafiltration—for detecting SARS-CoV-2 in high-turbidity, high-strength wastewater from inbound flights. The aluminum salt coagulation method exhibited the best overall performance, achieving an average recovery rate of 25.95% for SARS-CoV-2 pseudovirus, significantly higher than PEG precipitation (12.91%) and centrifugal ultrafiltration (0.22%) (P<0.05). Its detection limit reached 10 copies·mL⁻¹, whereas centrifugal ultrafiltration suffered severe membrane fouling, limiting detection to 1,000 copies·mL⁻¹. Considering the high pH buffering of flight wastewater, the aluminum salt method was optimized by adjusting pH to 6.00±0.4, employing rapid magnetic stirring, and reducing mixing time to 1 minute, yielding an average recovery of 27.56% (not significantly different from the original 25.95%, P>0.05). An automated enrichment device was developed based on the optimized method, reducing processing time per sample from 115 min to 60 min while maintaining comparable recovery and improved repeatability. Applied to 1,309 wastewater samples from inbound flights between January 2024 and May 2025, the average detection rate of SARS-CoV-2 was 45.45%, with trends consistent with national COVID-19 epidemiological data. The automated device demonstrates suitability for routine surveillance, providing technical support for port epidemic prevention.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509053
The escalating global generation of waste plastics necessitates robust recycling strategies to mitigate environmental impact and advance low-carbon development. This study employs life cycle assessment (LCA) and emission factor methodologies to quantify the carbon footprints of six distinct waste plastic valorization pathways: mechanical recycling, pyrolysis, alcoholysis, co-coking, solid fuel production, and direct incineration. The functional unit is one tonne of waste plastic, with system boundaries encompassing transportation, pretreatment, and resource utilization. The model accounts for indirect emissions from energy consumption, direct emissions from plastic decomposition, and carbon offsets from material or energy recovery. Results indicate that pyrolysis yields the highest carbon offset of approximately -3,024 kgCO2e per tonne, while mechanical recycling achieves an 88% material recovery rate and a net carbon offset of -991.4 kgCO2e. Net carbon emissions per tonne of waste plastic rank as follows: direct incineration (1,104 kgCO2e) > co-coking (185.8 kgCO2e) > solid fuel (115.4 kgCO2e) > alcoholysis (-259.5 kgCO2e) > mechanical recycling (-991.4 kgCO2e) > pyrolysis (-2,592 kgCO2e). These findings demonstrate that pyrolysis offers superior carbon reduction benefits compared to incineration, exhibiting a net-negative carbon footprint across its life cycle. The study provides a scientific basis for selecting low-carbon waste plastic valorization routes and informs carbon trading and emission reduction strategies in the solid waste sector.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510041
This study presents a full-scale engineering practice of retrofitting an idle upflow anaerobic sludge blanket (UASB) reactor into an aerobic granular sludge (AGS) system for treating low-strength municipal wastewater. The design capacity was 20,000 m3/d (maximum 24,000 m3/d), achieving separate treatment of industrial and domestic wastewater to reduce operational costs. Systematic analysis covered hydraulic capacity enhancement, effluent quality, pollutant removal efficiencies, sludge granulation progress, and operational costs. Results showed rapid start-up: the system reached 75% of design capacity by day 10 and 90% by day 26. During a 4-month operation, average removal efficiencies for COD, NH4+-N, TN, and SS were 83.2%, 97.0%, 75.9%, and 94.4%, respectively, even under low influent BOD5/TN ratios (typically below 4). Granulation progressed quickly: by day 44, average particle size was 2.6 times that of the inoculum and over 4 times that of flocs, with granules (>200 μm) accounting for 17.3%; by day 110, these values increased to 3.2 times and 5 times, with granule proportion reaching 33.4%. Compared to the previous year (June–August), the AGS process reduced electricity consumption, chemical consumption, and sludge production by 77.3%, 25.4%, and 30.4%, respectively, while saving 65.6% of footprint. This ten-thousand-ton case provides a practical basis for AGS technology application in China.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3864-4
Organic room temperature phosphorescence (RTP) materials, particularly those emitting in the near-infrared (NIR) region, hold great promise for bioimaging due to their deep-tissue penetration and minimal autofluorescence interference. However, achieving efficient NIR RTP with long lifetimes remains challenging due to inefficient triplet exciton utilization. Herein, we propose a dark triplet state activation strategy to achieve efficient NIR RTP by leveraging host–guest energy transfer. Using benzophenone derivatives (BP, OBP, MBP, PBP) as rigid host matrices with high intersystem crossing (ISC) efficiency and an NIR fluorophore (MPTCF) as the guest, we achieve efficient Dexter-type triplet-triplet energy transfer (TTET) that converts non-emissive host triplets into guest-centered NIR phosphorescence. Systematic optimization of the host–guest system has shown that PBP/MPTCF exhibits exceptional performance, including long phosphorescence centered at 705 nm, an ultralong phosphorescence lifetime (210.3 ms), and high ISC efficiency (44.4%). When fabricated into nanoparticles (NPs), PBP/MPTCF exhibits superior performance, featuring prolonged phosphorescence signals (>120 s), deep tissue penetration capability (>2 mm), and excellent biocompatibility (cell viability >95% at 300 μM). In addition, this system enables high-contrast subcutaneous imaging with excellent dispersibility and stable in vivo imaging capability. More importantly, PBP/MPTCF NPs demonstrate precise lymph node mapping through time-gated phosphorescence imaging and efficient tumor visualization within 4 h post-injection with a high tumor-to-liver ratio of 2.8. The successful activation of dark triplet states through this host–guest approach provides a general design principle for developing high-performance NIR RTP materials, while the demonstrated biomedical applications highlight their significant potential for advanced bioimaging and precision diagnostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3942-2
Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3943-y
Biodegradable polymers are promising for bioelectronic materials, yet simultaneously improving their mechanical, electrical, and optical performance remains a major challenge. Poly(3-hydroxybutyrate-co-4-hydroxyvalerate) (P34HB), a microbially synthesized polyhydroxyalkanoate (PHA), exhibits excellent biocompatibility and degradability but suffers from poor chain length control, limiting its functional performance. Here, we report a low-temperature, non-destructive supercritical ethyl alcohol-assisted polymerization (SEAP) strategy to enhance P34HB at the molecular level. Operating at 40 °C and 1500 psi, SEAP combines the permeability of supercritical CO2 with ethanol-mediated catalysis to promote in situ dehydration polymerization and efficiently remove impurities. Post-treatment, P34HB exhibits a 16% increase in number-average molecular weight, along with a record-high Young's modulus of 51.08 GPa and a 144% increase in elongation at break, overcoming the conventional trade-off between stiffness and ductility. Optical performance is also improved, with transmittance rising by 44% and refractive index increasing to 1.2. Material analyses confirm a higher ester group density and reduction of residual impurities. Electrical insulation is notably enhanced, with leakage current reduced by 50% to below 1 pA and reduced dielectric loss to 0.06. Cytotoxicity assays further verify excellent biocompatibility. This work establishes SEAP as a sustainable strategy for functionalizing P34HB, enabling its deployment in next-generation bioelectronics and flexible electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3885-8
Photocatalytic production of hydrogen peroxide (H2O2) via oxygen reduction reaction (ORR) and water oxidation reaction (WOR) from water and air offers a sustainable alternative to conventional anthraquinone processes. However, the intrinsic kinetic mismatch—fast ORR (microseconds to milliseconds) versus sluggish WOR (seconds)—limits overall efficiency. Here, we report aliphatic acylhydrazone covalent organic frameworks (AA-COFs) synthesized by coupling aliphatic hydrazides with benzotrithiophene motifs via acylhydrazone linkages. The pore walls are decorated with abundant S, O, and N heteroatoms, enhancing affinity toward both O2 and H2O, thereby improving the kinetics of both half-reactions. Through single-carbon atomic engineering, the optimized AA-COF achieves a trade-off between ORR and WOR kinetics, enabling efficient overall H2O2 photosynthesis from water and air without sacrificial agents. The material exhibits a H2O2 production rate of 4777 μmol g−1 h−1 and an O2 utilization/conversion efficiency of 99.3%. This work demonstrates that rational design of heteroatom-rich COFs can synchronize ORR and WOR, overcoming a major bottleneck in artificial photosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4061-5
The dynamic modulation of magnetic properties by external stimuli represents a paradigm shift in materials science, enabling non-contact, reversible control of spin states for applications in optical switching, sensing, and low-power spintronics. Prussian blue analogues (PBAs) are versatile platforms for photo-responsive magnetism, yet their photomagnetic response is highly sensitive to transition metal selection, alkali ions, vacancies, and water content, complicating targeted synthesis. Here, we introduce a generalizable strategy by incorporating the photo-responsive organic cation methyl viologen (MV2+) into PBA frameworks, yielding hybrids MVPB, MVPB-Co, and MVPB-Ni. Upon Xe lamp irradiation, MV2+ undergoes reduction to the radical cation MV+•, which acts as a spin carrier coupling to the magnetic moments of the metal ions. This mechanism decouples the photomagnetic response from the inorganic lattice, overcoming stoichiometric limitations. Irradiation leads to a substantial enhancement of magnetization, followed by partial relaxation under prolonged exposure, attributed to the generation and accumulation of MV+• radicals. These radicals function as dynamic magnetic modifiers, distinct from conventional light-induced charge transfer in PB frameworks. The approach is applicable across diverse cyanide-bridged metal pairs, irrespective of alkaline cations, vacancies, or water content, establishing a robust route for designing light-responsive magnetic materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511047
Ultra-high voltage (UHV) transmission lines are critical infrastructure for China's energy strategy. Compared with conventional voltage lines, UHV lines exhibit nonlinear growth in resource and capital consumption, complex supply chains, and strong spatiotemporal heterogeneity in carbon emission factors, resulting in substantial and uncertain construction-phase emissions. Accurate accounting is essential for achieving carbon peaking and carbon neutrality goals in the power sector. To address issues of ambiguous system boundaries, weak characterization of input parameter uncertainty, and poor cross-year applicability of input-output carbon intensities, this study defines the accounting boundary using budget quotas and develops a hybrid life cycle assessment (HLCA) model. For easily traceable emission sources, process-based LCA (PLCA) is applied, with uncertainty analysis via distribution fitting and Monte Carlo simulation. For difficult-to-trace sources, input-output LCA (IO-LCA) is used with carbon intensity correction. A case study of a ±800 kV transmission line yields a construction-phase carbon emission intensity of 1,858.91 t·km⁻¹ (CO₂ equivalent), with a 95% confidence interval of [1,379.73, 2,486.45] t·km⁻¹. Sobol global sensitivity analysis identifies key emission reduction pathways. The method's validity is confirmed by comparison with existing studies, providing quantitative support for low-carbon design, construction optimization, and carbon auditing of UHV projects.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509031
This study establishes a carbon footprint calculation method and an environmental benefit assessment model for the dismantling process of waste televisions (TVs) based on life cycle assessment (LCA). Activity data on energy consumption and material flows were collected from typical treatment enterprises via field investigation. The ReCiPe 2016 model was applied to quantify midpoint and endpoint environmental impacts. Results show that the dismantling and recycling process yields net environmental benefits in most impact categories. At the midpoint level, significant reductions were observed in fossil resource scarcity (−26,494.23 kg oil eq), freshwater ecotoxicity (−2.21×10^4 kg 1,4-DCB), and greenhouse gas emissions (−956.53 kg CO2 eq). At the endpoint level, reductions in human health damage (−1.59×10^4 DALY), ecosystem damage (−2.35×10^4 species·yr), and resource depletion costs (−4.22×10^4 USD) were achieved. Carbon footprint analysis indicates that the carbon footprint per TV ranges from 0.231 to 0.247 kg CO2 eq per unit, with electricity consumption as the dominant emission source. Sensitivity analysis reveals that electricity consumption significantly influences the carbon footprint. Finally, emission reduction recommendations are proposed from aspects of equipment upgrade and energy management, providing theoretical basis and practical guidance for low-carbon treatment of electronic waste.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511002
To treat large-air-volume, low-concentration volatile organic compounds (VOCs) containing tetrachloroethylene (PCE) generated from rubber-metal bonding, this study systematically investigated the adsorption-desorption behavior and interaction mechanisms of PCE, toluene, and methyl isobutyl ketone (MIBK) on granular activated carbon (GAC). Static adsorption experiments showed that PCE adsorption capacity reached 556.6 mg·g−1, while dynamic multi-component adsorption capacity was 179.6 mg·g−1. Kinetic analysis indicated that PCE adsorption was controlled by both intraparticle diffusion and external surface adsorption, whereas toluene and MIBK were primarily intraparticle diffusion-limited. During high-temperature nitrogen desorption, PCE underwent dechlorination, hydrogenation, and recombination, producing trichloroethylene, 1,2-dichloroethane, 1,2-dichloropropane, and HCl, with HCl accounting for 3.61% of the chlorine molar content in adsorbed PCE. After four adsorption-desorption cycles, the iodine value of GAC dropped below the industry standard of 600 mg·g−1; however, water washing and alkali immersion extended the cycle life to 8 and 9 cycles, respectively. The HCl generation pattern in co-adsorption systems was consistent with single-PCE systems. A regeneration process combining alkali immersion and water washing was proposed and integrated into an engineering strategy. Compared to conventional activated carbon adsorption coupled with RTO incineration, the proposed classification strategy reduced annual costs by 49.5×10⁴ CNY. This work provides a cost-effective and safe solution for Cl-VOCs treatment.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026031202
Liquid crystal monomers (LCMs) are a novel class of organic compounds primarily used in the manufacturing of electronic devices such as liquid crystal displays (LCDs). LCMs can enter the environment and organisms through various pathways, and due to their persistence, bioaccumulation potential, and toxicity, they pose significant threats to ecosystems and human health, emerging as a concerning category of organic pollutants. Current research focuses on developing standardized, high-throughput, and highly sensitive analytical methods based on chromatography-mass spectrometry for quantifying LCMs across multiple environmental media. By integrating exposomics and long-term dynamic monitoring, exposure mapping is used to identify characteristic LCMs in different regions. Through screening LCM-exposed biomarkers and integrating human metabolic kinetic models, the assessment methodology is transitioning from environmental concentration-based external exposure estimation to biologically effect-based internal exposure risk evaluation. This research provides a scientific foundation for improving exposure monitoring systems and control measures for LCMs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040708
Bisphenol S (BPS), a substitute for bisphenol A (BPA), is widely used in food packaging, plastics, and dental fillings. BPS enters and accumulates in the human body via respiratory, digestive, and dermal routes, posing increasing health risks. Epidemiological and animal studies link BPS exposure to metabolic disorders. This review systematically summarizes BPS pollution status and its mechanisms in obesity, non-alcoholic fatty liver disease, diabetes, cardiovascular diseases, and immune system disorders. BPS detection rates reach 78.5% in food samples (up to 67.1 μg·kg−1) and 81.67% in fish (up to 65.31 μg·kg−1). In indoor dust, BPS levels reach 26.6 μg·g−1, with adult daily exposure estimated at 0.78 ng·kg−1 in China. Mechanistically, BPS disrupts lipid and glucose metabolism, induces oxidative stress and inflammation, and alters nuclear receptor signaling. The review highlights the need for molecular target identification and metabolic network interaction studies to develop intervention strategies.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032004
This study proposes an integrated source apportionment framework that synergistically integrates pollution source classification, atmospheric dispersion modeling, backward trajectory analysis, weighted trajectory clustering, and forward contribution estimation to accurately target peak reduction at localized air pollution hotspots. Applied at the County-Town Scale in Beijing, this method was employed to investigate pollution episodes at the Tongzhou Dongguan monitoring site. Source classification relied on a pollution fingerprint database and temporal concentration profiles, while local contributions were quantified through combined air quality modeling and monitoring data. Forward and backward trajectory analyses enabled the identification of potential source regions and key contributors. Results indicate that construction dust, road dust, and emissions from the catering industry were the dominant local sources, with construction and road dust contributing most prominently to PM2.5 concentrations. Furthermore, abnormal PM2.5 increases were closely linked to low boundary layer height, weak winds, and high humidity, emphasizing the role of meteorological conditions in pollution accumulation. The proposed framework proves effective in pinpointing local pollution sources and offers a scientific basis for targeted air quality management at finer spatial scales.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032001
This study investigates the variation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and their monomer components during low-temperature thermal decomposition (250–500 °C) of municipal solid waste incineration fly ash from a typical mechanical grate furnace. Results demonstrate that pyrolysis temperature and time significantly affect the solid-phase removal rates of PCDD/F mass concentration and toxic equivalent (TEQ) concentration. The influence weights of temperature on mass and TEQ removal rates are 20.86 and 21.41, respectively, while those of time are 4.27 and 3.36. Response surface analysis identifies optimal conditions at 380 °C for 1.0 h. At 250–300 °C, both PCDFs and PCDDs concentrations increase synchronously, indicating enhanced formation. At 300 °C for 2.0 h, high-chlorinated congeners undergo dechlorination to low-chlorinated ones, notably increasing 2,3,7,8-T4CDD (I-TEF=1.0) and 1,2,3,7,8-P5CDD (I-TEF=0.5). From 350 °C upward, significant degradation occurs; at 380 °C (1.0 h), degradation rates for PCDDs and PCDFs reach 97.8% and 97.6%, respectively, effectively reducing TEQ-contributing congeners. The process proceeds in two stages: initial dechlorination, followed by destruction of dioxin-like compounds at higher temperatures. 2,3,7,8-T4CDD emerges as a critical component for detoxification. These findings provide a scientific basis for optimizing thermal treatment of fly ash to minimize environmental and health risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032801
A highly sensitive and accurate method using liquid-liquid extraction (LLE) coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed for simultaneous quantification of nine neonicotinoid insecticides and their metabolites in human urine and serum. Samples underwent enzymatic hydrolysis followed by ethyl acetate extraction, effectively enriching target analytes. Gradient elution and optimized mass spectrometry conditions enabled simultaneous determination. The method exhibited excellent linearity with correlation coefficients >0.999. In urine, limits of detection (LOD) ranged from 0.001 to 0.010 μg·L−1 and limits of quantification (LOQ) from 0.004 to 0.035 μg·L−1. In serum, LODs were 0.0004–0.02 μg·L−1 and LOQs 0.0014–0.07 μg·L−1. Average spiked recoveries were 89.3%–115.0% in urine and 83.0%–115.0% in serum, with relative standard deviations (RSD) of 0.5%–8.0% and 2.5%–9.5%, respectively. Analysis of paired urine and serum samples from 123 Guangzhou residents revealed detection rates of 94.3%–100% for the nine analytes in urine, with clothianidin showing the highest median concentration (1.89 μg·L−1). In serum, detection rates for clothianidin, thiacloprid, acetamiprid, imidacloprid-olefin, and 5-hydroxy-imidacloprid were below 60%, while the remaining four analytes ranged from 74.8% to 99.2%. Urinary concentrations of all nine analytes were significantly higher than serum concentrations (P<0.05). Significant positive correlations between urine and serum concentrations were observed for clothianidin, thiamethoxam, imidacloprid, and N-desmethyl-acetamiprid, with N-desmethyl-acetamiprid showing the strongest correlation. The LLE-UPLC-MS/MS method efficiently and accurately detects neonicotinoids and metabolites in urine and serum, providing a reliable tool for human exposure assessment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026030202
High nitrogen (N) inputs, low N use efficiency, and substantial greenhouse gas emissions constrain sustainable double-cropping rice production in the middle and lower reaches of the Yangtze River. To evaluate whether humic acid urea (HAU) can reconcile yield stability with N reduction and carbon mitigation, a field experiment was conducted in a double-cropping rice system. Five treatments were established: conventional urea at the recommended N rate (U), HAU at the recommended N rate (HAU), conventional urea with a 20% reduction in N input (U-20), HAU with a 20% reduction in N input (HAU-20), and a no-N control (CK). Rice yield, N uptake and utilization, and the full life-cycle carbon footprint were quantified. Results showed that HAU significantly increased double-cropping rice yield by 6.46% (early rice) and 8.76% (late rice) compared to U (P < 0.05). HAU-20 maintained yield equivalent to U, while U-20 significantly reduced yield. HAU-20 significantly improved nitrogen fertilizer apparent utilization rate, agronomic efficiency, and partial factor productivity. Specifically, apparent utilization rate increased by 9.24 percentage points (early rice) and 7.80 percentage points (late rice); agronomic efficiency increased by 18.51% and 26.69%, and partial factor productivity by 22.79% and 25.58% for early and late rice, respectively (P < 0.05). Life-cycle carbon footprint was significantly reduced by 26.25% (early rice) and 40.38% (late rice) under HAU-20 compared to U, with per-unit product carbon footprint reduced by 0.22 t CO2-eq·t−1 and 0.86 t CO2-eq·t−1, respectively. The reduction was primarily attributed to decreased CH4 and N2O emissions: early rice CH4 and N2O cumulative emissions decreased by 28.92% and 44.34%, and late rice by 44.46% and 63.85% (P < 0.05). In conclusion, HAU with 20% N reduction sustains yield, enhances N use efficiency, and significantly lowers carbon footprint, offering a viable path for green and low-carbon double-cropping rice production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4076-x
The transition from laboratory-scale to industrial hydrogen peroxide (H2O2) production hinges on achieving ultra-high photocatalytic efficiency. Herein, we demonstrate a nitrogen-substitution engineering strategy for photocatalysts by replacing partial carbon atoms in benzene-1,3,5-triamine with nitrogen atoms, showing dual synergistic effects: (1) electronic structure modification upon electronegativity and dipole moment of the building blocks, creating built-in electric fields that promote charge separation and interfacial electron transfer; (2) enhancement in adsorption of reaction intermediates significantly boosting oxygen reduction reaction (ORR) and water oxidation reaction (WOR) kinetics. This dual-modification system exhibits broadband light absorption extending to 700 nm (near-infrared), enabling outstanding performance under ambient conditions with a H2O2 production rate of 12099 μmol g−1 h−1 from water and O2 without any sacrificial agent, an apparent quantum efficiency (AQE) of 19% at 500 nm, and a solar-to-chemical energy (SCC) efficiency of 1.38%. This work establishes atom-engineered nitrogen substitution as a general approach for designing high-performance photocatalysts, offering a viable pathway for large-scale H2O2 production with solar-driven chemical synthesis paradigm.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3990-6
Sustainable bio-sourced functional materials are pivotal for advancing wastewater treatment technologies. This study reports a lignin-based carbon nanofiber (CNF) scaffold engineered with a Bi2WO6 (BWO) and ZnIn2S4 (ZIS) Z-scheme heterojunction via coaxial electrospinning and hydrothermal synthesis. The resulting all-component photocatalytic nanomembrane exhibits superior mechanical robustness under wet conditions, with a Young's modulus of 20.38 MPa and toughness of 2.48 kJ/m3. Stabilization kinetics are accelerated 10-fold (1°C/min), yielding significant energy savings. Using methylene blue (MB) as a model pollutant, the CNFs@BWO/ZIS membrane achieves 94.4% degradation efficiency (k = 0.01664 min−1) after 120 min of solar irradiation, maintaining excellent recyclability over five successive cycles. Systematic mechanistic studies elucidate the Z-scheme charge-transfer pathway, which optimizes interfacial photoexcited carrier separation and reduces energy loss. This work demonstrates a sustainable biomass-derived photocatalytic system with high mechanical integrity and catalytic performance, offering a viable route for efficient wastewater treatment and contributing to carbon neutrality goals.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512015
The co-contamination of cadmium (Cd), lead (Pb), and zinc (Zn) in agricultural soils near mining areas poses significant risks to ecosystems and human health. Conventional stabilization materials often exhibit insufficient performance for Zn, particularly in multi-metal systems. This study synthesized a novel composite biochar (PFMBC) by loading phosphate and iron-manganese oxides onto biochar via phosphoric acid impregnation followed by secondary pyrolysis at 600 °C. The stabilization efficiency of PFMBC was evaluated against pristine biochar (BC) and iron-manganese modified biochar (FMBC) in a soil collected from a lead-zinc mining area (total Cd: 43.77 mg·kg−1, Pb: 3355.94 mg·kg−1, Zn: 1296.57 mg·kg−1). After 60 days of incubation with 5% PFMBC, the DTPA-extractable (bioavailable) fractions of Cd, Pb, and Zn decreased by 73.44%, 90.10%, and 69.33%, respectively, significantly outperforming BC and FMBC. Sequential extraction indicated that PFMBC promoted the transformation of Cd, Pb, and Zn from acid-soluble and reducible fractions to more stable residual fractions. Characterization via FTIR, SEM, and XRD revealed enhanced surface functional groups and the formation of stable mineral phases. The synergistic effects of phosphate precipitation, iron-manganese oxide adsorption, and surface complexation contributed to the superior stabilization, particularly overcoming the challenge of Zn immobilization. These findings demonstrate that PFMBC is a promising amendment for the remediation of Cd-Pb-Zn co-contaminated soils, offering high efficiency and long-term stability.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202408057
Urban waterlogging, exacerbated by climate change and rapid urbanization, poses increasing risks, particularly in coastal low-lying areas with dense river networks. This study simulated waterlogging in the Shajing River drainage area of the Maozhou River basin, Shenzhen, using the SOBEK hydrodynamic model. Under a 5-year return period rainfall, 47 manholes overflowed and 31.29% of stormwater pipes operated at full capacity. Twelve waterlogging-prone points were identified: eight due to insufficient drainage capacity and five due to river backflow from low elevation. Two optimization schemes were compared: enlarging pipe diameters and implementing Low Impact Development (LID) measures. Pipe enlargement reduced overflowing manholes by 32 and full-flow pipe length by 20%, effectively decreasing surface ponding. LID measures reduced overflowing manholes by only 4 and full-flow pipe length by 1.5%, but decreased maximum flooding depth by nearly 1 m, alleviating drainage system burden. The study highlights the complex causes of coastal urban waterlogging, especially river backflow under tidal influence, and recommends considering sea-level rise and storm surge in drainage design. The findings provide valuable references for attributing waterlogging causes and planning drainage network upgrades in coastal cities.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60665-2
Levulinic acid (LA) is a promising platform product with wide industrial applications. Efficient conversion of cellulose into LA has become a research hotspot, yet traditional experimental optimization is time-consuming and inefficient. This study integrates multidimensional data—reaction conditions, solvent properties, and physicochemical characteristics of metal salts—to construct a systematic dataset. Six machine learning models (decision tree, gradient boosting regression, K-nearest neighbors, multilayer perceptron, random forest, and support vector machine) were developed to predict LA yield. The gradient boosting regression (GBR) model achieved the best performance, with a test-set determination coefficient (R²) of 0.94 and the lowest root-mean-square error (RMSE). SHapley Additive exPlanations (SHAP) and partial dependence analysis identified water fraction, catalyst dosage, and reaction temperature as the key factors influencing LA formation. By integrating the GBR model with particle swarm optimization (PSO), RuCl₃ was identified as an efficient catalyst under high-temperature and short-reaction-time conditions. This study demonstrates the potential of machine learning in cellulose conversion research, providing a data-driven strategy and theoretical guidance for efficient and green LA production.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608010
Under the synergistic advancement of the Dual Carbon Strategy and circular economy, high-value utilization of coal fly ash and multiscale pollutant remediation are critical. Direct synthesis of hierarchical porous zeolite A from coal fly ash, integrating microporous framework and mesoporous channels, faces challenges due to complex impurities and difficulty in controlling crystal growth and pore architecture. To overcome bottlenecks of conventional microporous zeolite A—narrow pores, mass-transfer limitations, and inefficiency in removing larger pollutants—this study used acid-treated coal fly ash as silica-alumina source and a soft-template-assisted alkali fusion-hydrothermal method to synthesize hierarchical porous zeolite A with three-dimensionally interconnected mesoporous network. Effects of template type and dosage on crystalline phase, morphology, and pore structure were systematically investigated. With 3% dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (TPOAC) as template, the zeolite exhibited step-like rough cubic morphology formed by self-assembly of nanocrystals. Its specific surface area and total pore volume reached 57.0 m²/g and 0.1351 cm³/g, respectively, approximately three- and four-fold increases over conventional microporous zeolite A. Using aqueous ammonia nitrogen and gaseous acetone as probe pollutants, differential responses were revealed: for ammonia nitrogen (ion-exchange mechanism), hierarchical pores mainly improved mass transfer, yielding adsorption capacity comparable to microporous zeolite A; for acetone (molecular sieving effect), hierarchical zeolite leveraged developed mesoporosity to overcome steric hindrance and induce capillary condensation, increasing adsorption capacity from 12 mg/g (microporous) to 59 mg/g—a 3.9-fold enhancement. This study elucidates structure-activity relationships and provides theoretical and technical support for large-scale fly ash utilization and design of materials for complex pollutant remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4060-5
Organic solar cells (OSCs) offer unique advantages for wearable electronics due to their light weight and mechanical flexibility. However, achieving both high optoelectronic performance and mechanical robustness in organic semiconductors remains challenging, compromising the efficiency and durability of stretchable OSCs. Here, we report a cross-linked conjugated polyelectrolyte (CPE)-polyoxometalate (POM) anode interlayer (AIL), PTN-POM, constructed via strong electrostatic interactions between ammonium groups and POM. The PTN-POM film exhibits an electrical conductivity of 3.30×10−3 S/m and high stretchability, significantly outperforming the classic PEDOT:PSS AIL in mechanical strength. Binary OSCs modified with PTN-POM achieve a power conversion efficiency (PCE) of 19.59%, the highest reported for OSCs using a cross-linked AIL. Notably, PTN-POM enables fabrication of water-proof OSCs that show no performance degradation after underwater storage for 42 days. Furthermore, stretchable OSCs incorporating PTN-POM demonstrate enhanced mechanical robustness, retaining 81% of initial PCE under a large tensile strain of 50%. This work significantly enhances the photovoltaic, waterproof, and mechanical properties of OSCs, advancing their potential for wearable photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4014-3
Laser-induced graphene (LIG) methods, including photothermal and photochemical approaches, are promising for flexible electronics yet face distinct limitations. Photothermal methods often produce graphene with uncontrolled structural and functional properties, while photochemical methods are restricted to a narrow range of precursors. To address these limitations, we propose a pressure-driven LIG (P-LIG) method that uses transient laser-generated pressure fields as an additional control parameter to improve graphene quality. An integrated framework combining ultrafast pump–probe interferometric imaging, large-scale molecular dynamics (MD) simulations, and explainable artificial intelligence (XAI) was developed to investigate this approach. Time-resolved measurements reveal the generation of transient pressure fields during femtosecond laser irradiation of polyimide films, confirming pressure as an intrinsic feature of the process. MD simulations under controlled pressure conditions demonstrate that pressure promotes the nucleation and stacking of graphene layers, resulting in more continuous and planar graphitic networks. XAI analysis quantitatively identifies the important contributions of pressure. These results confirm that the transient pressure introduced by the P-LIG method plays a key role in promoting more ordered, continuous, and planar graphene networks, and enhancing structural integrity and material quality beyond traditional methods. This provides a practical pathway for improving the performance and reliability of LIG-based flexible electronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4003-7
The escalating electromagnetic (EM) pollution necessitates the development of high-performance microwave absorbers (MAs) with integrated functionalities. However, it is still a difficult problem to integrate more related high performances into the designed MAs. Herein, a sustainable strategy was reported for fabricating three-dimensional (3D) porous magnetic Ni@C-anchored carbon foams (Ni@C/CFs) with abundant heterointerfaces and magnetic Ni@C nanoparticles using 3D porous chitosan foams and Ni-nitrilotriacetic acid chelate (Ni-NAC) as precursors. The modulation of carbonization temperature and concentration of Ni-NAC solution contributed to the tunable carbon graphitization, Ni crystallinity and magnetic Ni@C nanoparticles loading, which effectively improved their EM properties and EM wave absorption performances (EMWAPs). The optimized 3D porous magnetic Ni@C/CFs not only exhibited exceptional EMWAPs with a minimum reflection loss (RL min) of −27.58 dB and an ultra-wide effective absorption bandwidth (EAB) of 7.20 GHz, but also presented efficient thermal insulation and strong antibacterial activity (>95% inhibition against E. coli), which mainly originated from their excellent magnetic-dielectric synergies and unique 3D hierarchical porous structures. Consequently, this work delivers a coherent design strategy for next-generation multifunctional absorbers with potential applications in EM protection, thermal management, and adaptive stealth technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4144-y
Developing efficient strategies for electrically manipulating two-dimensional magnetism at room temperature is a key challenge in contemporary spintronics. In this study, we demonstrate giant electromechanical control over the magnetism of the room-temperature van der Waals ferromagnet Fe3GaTe2 by integrating it with the ferroelectric α-In2Se3. Modest gate voltages lead to an almost complete suppression of the coercive field by 96.5%, corresponding to a remarkable peak modulation sensitivity of ~8.1 mT V−1, which stands out among existing van der Waals magnetoelectric systems. Importantly, this substantial magnetoelectric response is predominantly unaffected by voltage polarity, as both positive and negative gate voltages induce similar magnetic modulation effects. To elucidate the underlying mechanism, we tracked the voltage-induced Raman spectral changes, revealing a peak shift of 1.7 cm−1 that accurately represents an effective in-plane tensile strain of ~1.42% under an equivalent bias, demonstrating polarity independence as well. The synchronized magnetic response and strain variation unequivocally indicate that the induced tensile strain serves as the fundamental physical driver behind the magnetic modulation. Additionally, density functional theory calculations corroborate that the reduction in magnetic anisotropy induced by tensile strain results in a decrease in the coercive field. Our work establishes a novel and efficient approach for achieving voltage control of magnetism at room temperature in van der Waals multiferroic heterostructures, highlighting their significant potential for applications in ultra-low-power magnetic logic and sensing technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4085-9
Bone defects remain a prevalent clinical challenge, and regenerative medicine based on bone tissue engineering offers promising solutions. Traditional osteogenic materials rely on bioactive macromolecules like growth factors, which suffer from poor stability and stringent storage requirements. From a structural perspective, bone tissue resides in a phosphorylated microenvironment, with 65–70% of inorganic components composed of hydroxyapatite. Inorganic phosphorylated materials induce osteogenic differentiation but exhibit high stiffness, brittleness, slow degradation, and limited mechanical tunability. Synthetic phosphorylated polymers with excellent mechanical properties and biocompatibility have been developed to address these issues. In this work, we developed a series of phosphorylated polymers derived from poly(glycerol sebacate) (PGS), a biocompatible and biodegradable material. Leveraging the hydroxyl-rich backbone of PGS, we demonstrated an efficient method for controllable phosphorylation of PGS side chains, enabling synthesis of PGS-based phosphorylated (PGS-P) polymers with tunable phosphorus contents. The optimized phosphorylated polyester, PGS-P4, exhibited strong ability to promote osteogenic differentiation of rat BMSCs, and its porous three-dimensional scaffolds showed favorable properties for bone regeneration. BMSCs cultured for one week and observed by fluorescence microscopy showed enhanced BSP protein expression on PGS-P2, PGS-P4, and PGS-P6 groups compared with PLGA and PGS, with PGS-P4 displaying the most intense signal. In summary, we present a simple and controllable method for preparation of functionalized polyesters and their porous scaffolds with tunable phosphorus content, validating its effectiveness in promoting osteogenic differentiation of rat BMSCs. All phosphorylated polyesters exhibit enhanced differentiation-promoting effects compared to non-phosphorylated PGS; however, the degree of enhancement does not increase monotonically with phosphorus content. PGS-P4, containing an optimal phosphorus level, shows the most pronounced biological functions.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60664-0
The selective hydrogenation of biomass-derived furfural (FAL) to high-value chemicals such as furfuryl alcohol (FOL) or tetrahydrofurfuryl alcohol (HFOL) is pivotal yet challenging due to the need for precise control over reaction pathways. In this study, a Ni2Al-LDO (layered double oxide) catalyst with highly dispersed surface NiO was synthesized via structural topological transformation of layered double hydroxides. The catalyst exhibited excellent performance in furfural hydrogenation, achieving a 91.42% yield of FOL at 160 °C and 1.4 MPa H2. Gradual reduction of Ni2Al-LDO produced Ni/NiO mixtures, enabling a tunable shift from FOL to HFOL as NiO content decreased and metallic Ni content increased. After reduction at 700 °C for 2 hours, the HFOL yield reached 93.95% under identical conditions. CO2-TPD, NH3-TPD, and FT-IR analyses revealed that variations in reduction degree influenced furfural adsorption behavior. NiO species selectively adsorb the C=O group of furfural, with isopropanol serving as the hydrogen source via the Meerwein-Ponndorf-Verley (MPV) pathway, yielding FOL. In contrast, metallic Ni0 surfaces facilitate flat adsorption, enabling simultaneous activation of both the furan ring and carbonyl group, and can activate both H2 and isopropanol, with H2 as the primary hydrogen source, leading to complete hydrogenation to HFOL. This work elucidates a clear structure-activity relationship centered on the metal oxidation state and provides a practical reduction-engineering approach for designing adaptable catalysts in biomass upgrading.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4101-5
Single-atom catalysts (SACs) represent a frontier in catalytic science, offering theoretically 100% atom utilization, tunable electronic structures, and coordination microenvironments, with broad prospects in energy conversion and high-end chemical synthesis. However, atomic-scale challenges—disordered active site distribution, constrained electronic structures, metal atom agglomeration, limited loading capacity, and insufficient coordination environment precision—severely restrict performance optimization and practical deployment. This review systematically analyzes the mechanistic interconnections among these challenges, framing them as a multi-level, coupled systemic problem rather than isolated issues. It summarizes recent regulation strategies including support engineering, coordination regulation, spatial confinement, and dynamic synthesis, emphasizing the value of multi-strategy synergy for performance breakthroughs. Future research directions include developing in-situ characterization with high spatial and temporal resolution, exploring multi-site synergistic catalytic mechanisms, and constructing standardized databases and rational design platforms. These efforts aim to enable large-scale advances in clean energy and green chemical processes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4096-7
Hexagonal boron nitride (h-BN) nanomaterials exhibit exceptional properties but suffer from severe aggregation due to undesirable surface characteristics, limiting their application in polymer nanocomposites. Existing covalent functionalization methods often compromise between time efficiency, energy consumption, and structural integrity. This study presents a rapid, room-temperature catalytic grafting strategy using tris(pentafluorophenyl)borane (B(C6F5)3) to functionalize h-BN nanoflakes bearing edge hydroxyl groups. The reaction between B–OH groups and activated Si–H bonds of hydrosilanes proceeds under mild conditions, preserving the structural integrity of h-BN. Density functional theory (DFT) calculations confirm the catalytic feasibility and elucidate two possible reaction pathways: backside-attack and flank-attack mechanisms. The modified h-BN exhibits significantly improved dispersibility in low-polarity solvents and tunable surface properties. This efficient method offers a versatile platform for h-BN surface engineering, facilitating broader practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.