SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4490-y
The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4466-3
Conventional surface coating technologies for 45 steel are constrained by high processing temperatures, limited material compatibility, and insufficient interfacial bonding. This study introduces ultrasonic vibration-assisted mechanical coating (UVAMC) as a low-temperature deposition route that mitigates these limitations. The process yields a chromium coating on 45 steel with a nanoscale elemental interdiffusion transition layer at the interface, achieving a bonding strength of 66.0 MPa. The coating delivers improved corrosion resistance in aggressive environments while preserving the substrate's original compressive and tensile strength. The method also demonstrates broad process adaptability, successfully depositing copper, aluminum, and 316 stainless steel powders, and forming complex shapes such as the "SZU" pattern. These results establish UVAMC as a viable surface functionalization strategy for metallic materials, combining efficient deposition with operational flexibility.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4299-9
A dual-doping strategy incorporating boron (B) and sulfur (S) into graphitic carbon nitride (g-C3N4) was employed to engineer band structures and construct an S-scheme homojunction (BSCN) for enhanced photocatalytic hydrogen (H2) evolution. The BSCN catalyst exhibited an interwoven architecture of porous nanotubes and nanosheets, providing a large specific surface area and abundant active sites. In situ X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations revealed an S-scheme charge transfer mechanism at the BCN/SCN interface, driven by a built-in electric field that facilitates efficient spatial separation of photogenerated charge carriers. Photoelectrochemical measurements confirmed improved light harvesting and charge separation. DFT simulations indicated near-thermoneutral hydrogen adsorption free energy (ΔGH* = 0.12 eV) at S-doped sites, favorable for hydrogen evolution reaction (HER) kinetics. The optimized BSCN achieved an exceptional H2 evolution rate of 14.409 mmol g−1 h−1, approximately 75-fold and 3.4-fold higher than pristine BCN and SCN, respectively. This work establishes a rational doping-mediated approach for designing high-efficiency g-C3N4 homojunctions and provides mechanistic insights into S-scheme charge transfer for solar-driven H2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4360-7
Polarization-sensitive photodetection is critical for advanced optical communication and imaging systems, yet conventional photodetectors suffer from low on-off ratios and limited polarization discrimination. Here, we report gate-tunable PdSe2/WSe2 van der Waals heterostructures that achieve ultrahigh light on-off ratio and polarization-sensitive photodetection. The heterostructure forms a type-II band alignment, enabling efficient charge separation and self-powered operation. By applying a gate voltage, the photoresponse can be modulated, achieving an on-off ratio exceeding 10^6 under illumination. The device exhibits a high responsivity of 1.2 A/W and a specific detectivity of 10^12 Jones at room temperature. Polarization-sensitive measurements reveal a linear dichroism ratio of 2.1 at 532 nm, attributed to the anisotropic crystal structure of PdSe2. The photodetector operates over a broad spectral range from visible to near-infrared (400-1000 nm) with fast response times (rise/fall < 100 μs). The gate-tunable capability allows dynamic control of the photocurrent, enabling adaptive sensing applications. These results demonstrate that PdSe2/WSe2 heterostructures are promising candidates for high-performance, polarization-sensitive photodetectors, offering a pathway for next-generation optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4287-1
Atomic-level manufacturing is a frontier technology enabling materials to achieve ultimate performance. This study explores the potential applications and critical scientific issues of metal atomic clusters, which are predominantly used in catalysis but suffer from intrinsic instability, leading to low yield, inconsistent size and structure, and susceptibility to agglomeration, oxidation, and sintering. We propose a novel concept: employing oxidized metal atomic clusters as dopants in oxygen-bearing materials, such as oxide dispersion strengthened (ODS) alloys, oxide-based cermets, and toughening ceramics. Using ODS alloy as a proof-of-concept, Ni-NiO coupled cluster-strengthened metallic Ni exhibits finer grains, a larger proportion of low-angle grain boundaries, higher geometrically necessary dislocation density, and achieves a 38% enhancement in Vickers hardness. To advance this concept, four critical scientific issues require resolution: oxidation control, disaggregation and dispersion, effectiveness comparison, and physicochemical behaviors and mechanisms. This work bridges the gap between atomic-level manufacturing and structural materials, offering a pathway to overcome the instability of metal clusters by leveraging their oxidation characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4183-3
Excessive ultraviolet (UV) radiation poses significant risks to human health, necessitating highly sensitive detection systems. Organic photodetectors (OPDs) offer high sensitivity and tunable spectral response, but their UV performance is constrained by conventional glass/indium tin oxide (ITO) substrates and electrodes, and insufficient photoactive layer responsivity. Here, we report high-performance UV-OPDs achieved through UV-transparent window and active-layer optimization. Replacing glass/ITO with a UV-transparent window comprising a quartz substrate and PH1000 electrode enhances UV transmittance. Integrating the high UV-responsive blend PM6:Y6:PC71BM as the active layer, the optimal ternary UV-OPD exhibits external quantum efficiency (EQE) exceeding 53% across 280–400 nm, with a peak EQE of 78.29% and responsivity of 214.68 mA/W at 340 nm, alongside a rapid response time of 2.6/2.1 μs. This performance represents the best combination of responsivity and response time reported to date in the UV region. We demonstrate the potential of these UV-OPDs for outdoor real-time UV monitoring. This work presents a promising strategy for developing high-performance UV-OPDs through transparent substrate and electrode engineering, and active-layer optimization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3596-2
High-entropy alloys (HEAs) have shown great promise in the CO2 reduction reaction (CO2RR) due to their tunable composition and unique physical and chemical properties. However, the role of HEAs in CO2RR and the underlying reaction mechanism remain underexplored, particularly through in situ techniques. In this work, we investigate the mechanism of CO2 reduction on AuAgCuPdPt HEAs using in situ Raman spectroscopy and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy to reveal key intermediates and reaction pathways. Our results demonstrate that within the potential window of −0.2 to −0.7 V vs. reversible hydrogen electrode (RHE), the AuAgCuPdPt HEAs efficiently reduce CO2 to CO, achieving a Faradaic efficiency (FE) for CO greater than 90%, with a peak FE of 96.5% at −0.3 V vs. RHE. The CO2− intermediate was observed at low potentials, revealing the reaction pathway in the CO2 reduction process. Additionally, in situ ATR-FTIR results suggest that the introduction of an appropriate amount of Pt metal not only promotes water dissociation to generate protonic hydrogen, but also facilitates the desorption of *CO intermediates. The kinetic isotope effect of hydrogen-deuterium (H-D) confirms that water dissociation acts as a key proton donor in CO2RR. Furthermore, the catalyst of AuAgCuPdPt HEAs was applied as cathodes in a Zn-CO2 battery, achieving 90.23% FE for CO and a power density of 3.474 mW cm−2. This study provides new insights into the mechanistic understanding of CO2 reduction and underscores the importance of in situ spectroscopic techniques for advancing the design of efficient electrocatalysts for CO2 conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61029-8
Zinc-ion supercapacitors (ZISCs) are promising energy storage devices due to their low cost, high safety, and minimal environmental impact. However, their low energy density and poor cycling performance hinder practical application. This study presents a simple electrochemical exfoliation method to reconstruct the surface of carbon paper, introducing oxygen functional groups that enhance pseudocapacitance. The resulting binder-free electrode (EECP) exhibits a large surface area and rapid charge transfer, leading to a dominant capacitive-type charge storage mechanism with 78.8% capacitive contribution at 10 mV/s. The EECP electrode delivers a maximum specific capacitance of 252.5 F/g at 1 A/g and retains 81.7% of its capacitance after 10,000 cycles. A full ZISC device, assembled with EECP as the cathode, Zn as the anode, and 1 mol L−1 ZnSO4 aqueous electrolyte, achieves a capacitance of 186.22 F/g at 1 A/g, a capacitance retention of 97.01% after 10,000 cycles, and an energy density of 46.6 Wh/kg at a power density of 500.4 W/kg. These results demonstrate that EECP is a promising cathode material for high-rate, next-generation zinc-ion supercapacitors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3687-6
P2-Na0.67Ni0.33Mn0.67O2 (NNMO) is a promising cathode for sodium-ion batteries (SIBs) due to its high energy density and operating voltage. However, severe P2-O2 phase transition at high cut-off voltage causes large volume variation, structural degradation, and rapid capacity decay. Ion doping has been explored to suppress this transition, but achieving both high capacity and stability remains challenging. Here, we demonstrate that precise composition regulation enables both. The designed P2-Na0.67Ni0.28Mg0.03Fe0.04Mn0.55Ti0.1O2 retains high electrochemical active element content while effectively suppressing phase transition, leading to outstanding structural stability and fast charge transfer kinetics. This cathode delivers a high specific capacity of 143.5 mAh g−1 at 0.1 C and maintains stable cycling over 1000 cycles. Our work provides a new strategy for rationally designing high-capacity, stable cathode materials for SIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3506-3
Metallic glasses (MGs) often suffer from sluggish hydrogen evolution reaction (HER) kinetics in neutral and alkaline media, with their catalytic performance predominantly confined to acidic environments. Herein, we reported a novel thermoplastic forming technique to fabricate a self-supported partially crystallized nanoporous Pt56.2Ni5.2Cu16.8P21.8 metallic glass (C-NPMG). The C-NPMG catalyst delivers ultralow overpotentials of 18.0 mV (0.5 M H2SO4), 42.2 mV (1 M KOH), and 88.0 mV (1 M phosphate-buffered saline (PBS)) at a current density of 10 mA cm−2, outperforming most state-of-the-art non-noble MGs and Pt-based benchmarks across all pH conditions. Notably, it maintains negligible performance decay for over 1000 h in alkaline electrolytes, showcasing superior stability. Experimental and computational analyses reveal that the enhanced HER activity arises from three synergistic effects: (1) the high-specific-surface-area nanoporous architecture that maximizes active site exposure; (2) the formation of crystallite-amorphous interfaces during partial crystallization, which lowers the energy barrier for H2 desorption; (3) the hierarchical super-hydrophilic and super-hydrophobic wettability of the C-NPMG, which optimizes mass transport and prevents electrolyte-induced corrosion. This work establishes a novel design paradigm for developing high-performance, pH-universal HER electrocatalysts by integrating structural nano-engineering and crystallite-amorphous phase synergy in metallic glass systems to overcome the trade-offs between performance and stability in electrochemical water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3682-6
Metal single-atoms with optimized coordination structure on highly accessible substrate can maximize the metal utilization efficiency along with enhancing catalytic activities. Herein, axial nitrogen-coordinated Fe-N5 sites on N-doped carbon (denoted as FeN5@N-C) hollow microplates are fabricated via a unique Fe3+-chelated polydopamine assisted hollowing strategy using ZIF-L microplates as multifunctional templates. Due to the powerful chelating and adhesive ability of polydopamine, this hollow-carbon strategy can be extended to fabricate single-atom Fe-N-C hollow structures with different shapes and encapsulate other transition-metal single atoms (Ni, Co, Mn, and Cu) into the N-doped carbon hollow microplates. The FeN5@N-C hollow microplates exhibit outstanding oxygen reduction reaction (ORR) capability with an impressive half-wave potential of 0.93 V vs. reversible hydrogen electrode and high stability, which can serve as air-cathode catalysts for high-performance Zn-air batteries with high peak power density of 225.3 mW cm−2 and stable cyclability of up to 400 h. Comprehensive analysis and theoretical calculations elucidate that axial nitrogen coordination in Fe-N5 catalytic sites, unlike the planar Fe-N4 configuration, can compete well with the bonding of OH* through additional 3d-2p orbital hybridization, thereby giving moderate bonding strength to enhance the ORR activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3679-8
Idiopathic pulmonary fibrosis (IPF) is a chronic interstitial lung disease with high mortality and limited therapeutic options. Dysregulated macrophage polarization drives fibroblast activation and epithelial-mesenchymal transition (EMT), yet no effective management exists. Here, we develop an inhalable methane nanocapsule (MNC) that spatiotemporally controls methane release in the lung to remodel the fibrogenic microenvironment. MNC is formulated via self-assembly of biodegradable poly(lactic-co-glycolic acid)-polyethylene glycol (PLGA-PEG) and a novel acid-responsive methane prodrug Fe(BPY)2(CH3)2, enhancing mucosal penetration and sustained methane release in acidic inflammatory niches. In a bleomycin (BLM)-induced pulmonary fibrosis model, MNC inhalation achieves efficient lung deposition and sustained methane release, significantly reducing inflammation, ameliorating fibrosis, and improving lung function without systemic side effects. Mechanistically, MNC rebalances macrophage polarization by inhibiting M2 phenotype overexpression and downregulates the MMP9/TIMP-1 ratio to suppress myofibroblast proliferation and EMT, synergistically halting fibrotic progression. This inhalable methane nanocapsule offers a promising strategy for safe and effective IPF treatment.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61036-5
Large graphene oxide (LGO) sheets offer significant advantages over smaller ones in various applications, yet their production via Hummers-type oxidation of large natural graphite flakes remains challenging due to difficulties in achieving full oxidation and avoiding fragmentation. This study provides the first direct evidence that large graphite flakes (up to 1 mm) can be completely oxidized without fragmentation under static conditions, as revealed by in-situ monitoring. The oxidation process is governed by diffusion of the oxidizer between layers, described by Fick's law, where a high oxidizer concentration gradient increases the diffusion rate. By minimizing the amount of concentrated H2SO4 solvent, we achieved a semi-solid state that elevates oxidizer concentration, facilitating Mn(VII) diffusion and enabling complete oxidation of gram-scale large flakes with significantly reduced reagent consumption. Reaction temperature was optimized to balance graphite oxidation and Mn(VII) self-decomposition. Using this approach, 200-, 100-, and 50-mesh natural graphite were fully oxidized with reduced H2SO4 and KMnO4 usage. After exfoliation, LGO with average lateral sizes of 27.3, 58.7, and 116.2 μm were obtained, respectively, with 100% conversion and yield over 165%. This work not only provides a scalable, cost-effective strategy for LGO production but also advances the fundamental understanding of Hummers-type oxidation.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61073-6
Elastomers are widely used in engineering but suffer degradation when exposed to heat, ozone, UV radiation, and chemicals. To enhance performance for specific industrial applications, blending with other materials is common. In this study, chloroprene rubber (CR) was blended with brominated butyl rubber (BIIR) and reinforced with Ketjenblack (KB) at concentrations up to 20%. KB exhibits a porous, fluffy morphology with a high specific surface area of 1347 m²/g. Tensile tests were conducted before and after exposure to UV, ozone, saline, petrol, and diesel environments, and retention capacity was evaluated per ASTM standards. Transmission electron microscopy confirmed uniform dispersion of KB filler. Tribological and barrier property studies identified 10% KB as optimal due to uniform dispersion. Thermal degradation kinetics were analyzed using Kissinger–Akahira–Sunose modeling to determine activation energy. Dynamic mechanical analysis indicated a 5 °C reduction in glass transition temperature for the 20% composite. These elastomeric blends demonstrate potential as advanced materials for harsh industrial applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61072-4
Sodium-ion capacitors (SICs) typically feature a hybrid design, incorporating a battery-type anode that operates by faradaic redox reactions and an activated carbon cathode that functions through electrical double-layer (EDL) adsorption/desorption. However, the kinetics of faradaic processes are inherently slower than those of EDL processes, leading to a fundamental problem known as kinetic imbalance between the electrodes, which hinders the development of high-performance SICs. To address this, we synthesized composites of bismuth nanoparticles in N-doped carbon (Bi@NC) by a high-temperature sintering method. The resulting Bi@NC anode has a specific capacity of 300 mAh g−1 at 0.5 A g−1, an exceptional rate capability (maintaining performance at currents exceeding 75 A g−1), and outstanding cycling stability over 12,000 cycles. Three-electrode Swagelok cell tests revealed that this high-rate Bi@NC composite effectively decreases the kinetic gap with the activated carbon cathode, as shown by an analysis of their respective potential swing windows (vs. Na/Na+). This enables the fabricated SIC to achieve a maximum energy density of 115 Wh kg−1, a peak power density of 45,535 W kg−1, and a long cycle life exceeding 8,000 cycles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3713-y
Layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER), yet their practical application remains limited by poor electrical conductivity and sluggish reaction kinetics. In this work, we synthesize three high-entropy LDHs (HELDHs) featuring a hierarchical architecture of microspheres assembled from ultrathin nanosheets, via a simple hydrothermal method using a combination of low-cost, catalytically active transition metals (Fe, Co, Ni, Mn, Zn, Cu, and Cr). Among them, the FeCoNiMnZn HELDH exhibits outstanding OER performance, requiring an overpotential of only 306 mV to reach a current density of 100 mA cm−2. Notably, during 200 h of continuous operation, the device exhibits a stable and, in some cases, increasing current output. This exceptional activity is attributed to the formation of abundant cation vacancies, induced by Zn leaching, which enhance the intrinsic catalytic properties by optimizing the adsorption energies of key OER intermediates. Density functional theory calculations further validate that these vacancies modulate the electronic structure and lower reaction barriers, underscoring the effectiveness of cation-vacancy engineering in high-entropy systems for efficient and durable water oxidation catalysis. The optimized catalyst was further evaluated as the air cathode in a zinc–air battery, demonstrating practical electrochemical performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507054
In many Chinese wastewater treatment plants (WWTPs), residual chlorine is still manually monitored at low frequencies, leading to imprecise disinfectant dosing. This study systematically compared four machine learning models—backpropagation (BP) neural network, long short-term memory (LSTM) neural network, random forest (RF), and support vector regression (SVR)—for predicting chlorine consumption (i.e., the difference between chlorine dose and residual chlorine) during non-monitoring periods under different residual chlorine monitoring frequencies (every 1, 2, 4, 6, and 8 h). Using data from Plant A (equipped with online residual chlorine monitoring) and Plants B and C (manual monitoring every 6 h and 8 h, respectively), input variables included online water quality indicators (temperature, flow, NH3-N, CODCr, TP, TN) and chlorine dose. Results showed that at 1-h intervals, LSTM achieved the highest prediction accuracy; at 2–4-h intervals, RF performed best; at 6-h or lower frequencies, BP was superior; SVR performed worst across all frequencies. Validation on Plants B and C confirmed BP's optimal performance under low-frequency conditions, and particle swarm optimization (PSO) significantly improved its accuracy. These findings provide a basis for selecting appropriate machine learning models for chlorine consumption prediction under varying monitoring frequencies, particularly low-frequency manual monitoring, thereby supporting precise disinfectant dosing control.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506041
Urban and rural multi-source organic waste faces bottlenecks including high compositional heterogeneity, single resource recovery pathways, and uneven product quality. In the Taihu Lake region, active tourism and catering, high greening, and dense water networks generate large volumes of diverse waste with high moisture content, exacerbating these issues. This study evaluated a coupled bio-drying and aerobic composting process at a demonstration center in Linhu Town, Suzhou, Jiangsu Province, employing a three-stage control strategy: gradient dewatering, high-temperature stabilization, and maturation enhancement. Continuous operation showed that kitchen waste moisture content decreased from 77.70% to 58.69% after 1 day of bio-drying, to 23.22% after 7 days of silo reactor composting, and to 17.70% after at least 20 days of maturation. The aerobic composting phase maintained temperatures above 55°C for over 5 days, reaching a maximum of 68.1°C, meeting the harmless treatment requirements of CJJ 52—2014. After 20 days of maturation, the organic fertilizer product had an electrical conductivity below 4.00 mS·cm−1, organic matter content of 51.22%, total nutrient content of 5.61%, and heavy metal concentrations below the limits of NY/T 525—2021. The results provide technical support for efficient treatment and resource utilization of urban and rural organic waste.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506053
Red mud, a highly alkaline industrial solid waste from alumina production, poses severe environmental risks due to its high alkalinity, low organic matter content, and poor aggregation, which critically impede its soil reconstruction and ecological utilization. This study proposes a novel approach of low-temperature micro-oxidation to drive the synergistic soil reconstruction of red mud and coal. By constructing a low-temperature micro-oxidation atmosphere, the soil properties of the reaction products were investigated, the decomposition and reconstruction of alkaline minerals and alkali release were analyzed, and the oxidation of carbon-based minerals and organic matter transformation in coal were examined. The mechanism of the synergistic reaction between red mud and coal under low-temperature micro-oxidation was elucidated. Results showed that at 250 °C under micro-oxidation, the pH of the product decreased to 8.47, organic matter content increased to 12.98%, and the proportion of aggregates >0.250 mm increased. Alkaline minerals such as cancrinite and grossular in red mud underwent decomposition and reconstruction in the low-temperature hydrothermal environment, releasing substantial free alkali. The condensed aromatic rings of carbon-based minerals in coal were oxidized by free radicals, leading to ring-opening and bond cleavage, producing small-molecule organic acids and macromolecular humic acids. The continuous oxidation of carbon-based minerals in coal generated acids, which neutralized the alkali released from red mud, driving sustained dealkalization. The inorganic particles of red mud flocculated with macromolecular humic acids, forming micro-aggregates and significantly improving soil properties. This research provides technical support for the rapid ecological utilization of red mud at industrial scale.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112804
The rapid dissemination of antibiotic resistance genes (ARGs) in aquatic environments poses serious threats to public health and environmental safety under the 'One Health' framework. Nanoplastics (NPs), as co-occurring pollutants, can exacerbate ARG risks by promoting horizontal gene transfer (HGT), yet the influence of different functional groups on extracellular ARG (eARG) transformation remains unclear. This study investigated the effects of carboxy-modified polystyrene NPs (PS-COOH) and amino-functionalized polystyrene NPs (PS-NH2) compared to unmodified polystyrene NPs (PS) on the transformation of the extracellular resistance plasmid IE-V1955 (carrying an ampicillin resistance gene) into Escherichia coli DH5α. Results showed that PS-COOH exposure promoted plasmid transformation similarly to PS, with effects increasing over 0.1–20 mg·L−1. Low concentrations (0.1–0.5 mg·L−1) of PS-NH2 also enhanced transformation, with stronger effects than PS-COOH at equal doses, whereas high concentrations (1–20 mg·L−1) inhibited it. Mechanistically, PS-COOH (0.1–20 mg·L−1) and low PS-NH2 induced intracellular reactive oxygen species (ROS), increased cell membrane permeability, elevated the protein-to-polysaccharide ratio in extracellular polymeric substances (EPS), and promoted biofilm formation, thereby facilitating transformation. High PS-NH2 concentrations caused excessive ROS leading to cell lysis and formed aggregates with plasmids larger than membrane pores, blocking uptake. These findings provide a theoretical basis for assessing the combined environmental health risks of NPs and ARGs.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604011
Reverse osmosis (RO) membrane fouling remains a critical bottleneck in reclaimed water production, yet its spatial heterogeneity over extended operation is poorly understood. This study investigated fouling characteristics and microbial community dynamics on RO membranes after 3.5 years of operation in a full-scale microfiltration-reverse osmosis (MF-RO) system treating reclaimed water. Long-term monitoring showed stable effluent quality (turbidity <0.1 NTU, conductivity <400 μS/cm), but RO inlet pressure exhibited seasonal fluctuations of 15%–22% between summer and winter, attributed to water viscosity changes. Membrane autopsies revealed distinct fouling layers at the inlet (RO1) and outlet (RO2) ends. RO1 featured a dense bio-inorganic composite fouling layer with CaSO4 crystals and rod-shaped microbial aggregates (5–10 μm), dominated by Proteobacteria (77.11%), particularly Alphaproteobacteria (71.49%) and Xanthobacteraceae (35.29%), which secreted extracellular polymeric substances (EPS) to form biofilms. In contrast, RO2, exposed to higher salinity, showed reduced microbial abundance (Proteobacteria decreased to 64.79%) and a shift toward halotolerant taxa, including Microbacteriaceae (23.73%) and Actinobacteriota (24.76%), with EPS secretion increased by 42%. Alphaproteobacteria relative abundance dropped by 19.3%, while Gammaproteobacteria rose to 12.54%. These findings elucidate salinity-driven microbial succession and spatial heterogeneity of fouling, providing a basis for targeted antifouling strategies and 'zonal-graded' cleaning protocols in reclaimed water plants.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604012
A newly constructed wastewater treatment plant with a design capacity of 100,000 m3/d receives influent containing approximately 15% industrial wastewater, resulting in water quality and quantity fluctuation coefficients of 1.2–1.5, refractory organic matter (as COD) exceeding 35% of total COD, and a total nitrogen (TN) concentration up to 55 mg/L. To ensure stable effluent compliance and enhance shock resistance, a modified Bardenpho process was implemented, integrating multi-point influent distribution, post-anoxic and post-aerobic zones, and supplemented with an equalization basin, high-efficiency sedimentation tank, and denitrifying deep-bed filter. During commissioning and operation, the process achieved average removal efficiencies of 96.10% for COD, 98.24% for NH3-N, 83.89% for TN, and 98.29% for TP. Effluent concentrations stabilized at 15.4 mg/L COD, 0.57 mg/L NH3-N, 7.94 mg/L TN, and 0.12 mg/L TP, consistently meeting the Class 1A standard of GB 18918—2002. The modified Bardenpho process demonstrates strong adaptability and stability for treating wastewater with high nitrogen and refractory organic loads, improving carbon source utilization and reducing energy consumption. Design parameters and operational experience provide valuable references for similar municipal plants, particularly those receiving significant industrial wastewater fractions.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225185
Sulfur hexafluoride (SF6), widely used as an insulating gas in high-voltage electrical equipment, possesses a global warming potential (GWP) 25,200 times that of CO2, necessitating efficient degradation technologies. This study employed computational fluid dynamics (CFD) to simulate the thermal catalytic degradation of SF6 in a fixed-bed reactor, integrating models for porous media, heat transfer, turbulence, and chemical kinetics. The simulations revealed significant radial non-uniformities in pressure, velocity, temperature, and species concentration distributions, with temperature identified as the dominant factor influencing degradation efficiency. Radial temperature gradients caused uneven reaction rates, with degradation rates near the wall substantially exceeding those at the central axis, thereby reducing overall SF6 conversion. To address this, structural optimizations were implemented, including reducing the reactor tube diameter and incorporating inert porous media with high thermal conductivity at both ends of the catalytic section. These modifications enhanced radial heat transfer, homogenized the temperature field, and improved the uniformity of reaction rates and species concentrations. Parametric studies on inlet gas velocity showed that both excessively low and high flow rates were detrimental: low velocities led to underutilization of the downstream catalyst and increased energy consumption, while high velocities deteriorated heat transfer and exacerbated radial temperature gradients. The optimal inlet velocity range was determined to be 0.4–0.8 m/s for a reactor tube inner diameter of 10 mm, balancing catalyst utilization, energy consumption, and degradation efficiency. This research provides data-driven guidance for the design and scale-up of SF6 catalytic degradation reactors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4028-5
The escalating thermal management demands of modern electronics necessitate materials with superior thermal conductivity and matched thermal expansion. Cu/Diamond composites are promising, yet their fabrication typically requires extreme conditions (high temperature/pressure) or complex coating processes. This work introduces a one-step, heat-source-free cold manufacturing method using ultrasonic vibration to consolidate Cu/Diamond composites at room temperature and a low pressure of ~16 MPa within seconds. The applied pressure is reduced by 200–500 times, and the required temperature is only 20% of that used in conventional high-temperature high-pressure sintering. Direct metallurgical bonding at Cu-Cu interfaces and solid embedding of diamond particles in the Cu matrix are achieved, yielding a composite with a high yield strength of 150 MPa. The method enables a maximum diamond proportion of ~60%, resulting in a thermal conductivity exceeding 1043 W/(m·K) and a coefficient of thermal expansion below 10×10⁻⁶ K⁻¹. Complex shapes are readily fabricated, and heat dissipation tests demonstrate superior performance compared to commercial Al₂O₃ and AlN substrates. The loose preparation conditions and rapid processing confer significant industrial production potential.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3781-8
The 2xxx (Al-Cu-Mg) alloy is widely used in transportation fields due to its excellent strength-to-weight ratio. However, conventional heat treatments such as peak aging (PA) often result in a pronounced strength-ductility trade-off and limited fatigue resistance. To address these limitations, this work presents a comprehensive study on the mechanical properties and fatigue behavior of Al-Cu-Mg alloy subjected to a cyclic plasticity treatment. The cyclic strengthened (CS) samples exhibit a well-balanced combination of strength and ductility due to the formation of nanoscale solute clusters. A systematic and quantitative analysis of the strengthening mechanisms is performed to evaluate the contributions of key microstructural features to the mechanical response. Moreover, the CS samples also demonstrate a significantly higher fatigue ratio and fatigue strength compared to the PA sample, despite exhibiting comparable tensile strength. These improvements are attributed to the absence of weak precipitate-free zones (PFZs) induced as a result of cyclic plasticity, which completely eliminates the pronounced strength differential between the grain interiors and the PFZs observed in the PA state. This microstructural uniformity effect effectively suppresses strain localization under cyclic loading, promotes a more homogeneous strain partitioning, and consequently delays fatigue crack initiation. These findings highlight cyclic plasticity treatment as a promising microstructure design strategy for simultaneously enhancing the mechanical and fatigue properties of high-strength Al alloys.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4054-x
The sluggish kinetics and high onset potentials of the oxygen evolution reaction (OER) at the anode of alkaline water/seawater electrolyzers limit overall energy efficiency. Noble-metal oxides like RuO2 are active but suffer from high cost, agglomeration, and dissolution under oxidizing potentials, especially in chloride-rich electrolytes where competing chloride oxidation reaction (ClOR) occurs. Here, we report a mild two-step dry-wet milling strategy to achieve throughout lattice doping of F− into MnO2 (F-MnO2) and subsequent anchoring of atomically dispersed Ru via Ru–O/F hybrid bonds. The strengthened Mn 3d–O/F 2p hybridization and negative charge shielding of surface F− enhance OER activity/selectivity relative to ClOR and impart superior Cl− tolerance and corrosion resistance. The resulting F-Ru-MnO2-TH electrocatalyst exhibits overpotentials of 280 mV and 200 mV at 10 mA cm−2 in alkaline water and simulated seawater, respectively. It retains ~100% of initial activity after 200 h continuous operation in alkaline media and >95% after 300 h in simulated seawater, significantly outperforming Ru-MnO2 and commercial RuO2. This work provides a scalable route to durable, high-performance OER catalysts for seawater electrolysis.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61107-9
Graphene's exceptional electrical, thermal, mechanical, and chemical properties render it promising for electronics, energy storage, protective coatings, catalysis, and environmental remediation. However, large-scale adoption is hindered by high synthesis costs, process complexities, and integration issues. Among production methods, chemical vapor deposition (CVD) on metals is the most scalable, with copper widely used due to its low carbon solubility and excellent monolayer control. Yet, Cu substrates are costly ($8–10/kg), transfer steps introduce defects, and the resulting graphene is poorly matched to structural components. Iron-based substrates offer an attractive alternative, providing much lower material cost, direct compatibility with steel infrastructure, reduced growth temperatures, and intrinsic functionalities such as magnetism and catalytic activity, enabling new applications. This review analyzes graphene growth on pure iron, iron alloys, and iron-based nanoparticles, focusing on growth mechanisms, substrate engineering, and characterization approaches tailored to challenges like carbide formation. Applications including corrosion-resistant coatings, electronics, energy storage, catalysis, water treatment, and electromagnetic shielding are considered. Despite the limitation of high carbon solubility, iron can be exploited for controlled multilayer formation useful for barrier and energy applications, while alloying and process control enable tunable monolayer or few-layer films, making iron-based CVD graphene a versatile, cost-effective platform.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61112-2
The design of heteroatom-doped porous carbon materials integrated with metal oxide nanostructures has emerged as an efficient approach for improving the electrochemical performance of supercapacitors. A green and cost-effective method is reported for the fabrication of a hierarchical porous carbon composite from bacterial cellulose (BC), lignosulfonic acid (LS), and polypyrrole (PPy). LS serves as both an anchoring agent and a soft molecular template, directing the oxidative polymerization and uniform deposition of PPy onto the BC nanofibers in the presence of FeCl3 as the oxidizing agent. Subsequent carbonization under a nitrogen atmosphere results in the formation of an N/S co-doped carbon framework decorated with Fe3O4 nanoparticles, denoted C-BCLP. For comparison, a control composite consisting of BC and PPy without LS was carbonized to produce C-BCP. X-ray diffraction patterns confirm the synthesis of Fe3O4 nanoparticles and the preservation of the fibrous carbon structure. Electron microscopy shows that C-BCLP has a highly porous and conductive network with a homogeneous distribution of C, O, N, S, and Fe elements. Because of the combined effects of hierarchical porosity, heteroatom doping, and Fe3O4 incorporation, the C-BCLP electrode has high specific capacitances of 338.3 F g–1 at 1 A g–1 and 191.6 F g–1 at 10 A g–1. In addition, it has excellent cycling stability, retaining 99.1% of its initial capacitance after 10,000 charge-discharge cycles, outperforming the C-BCP electrode. The work suggests a promising way to develop next-generation high-performance supercapacitors.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61099-2
The first molecular dynamics (MD) simulation dataset is reported for the interfacial shear behavior of carbon fiber/thermoplastic composites (CFRTPs), aimed at overcoming the critical interfacial problem that limits their high-end applications such as aerospace and new energy vehicles. The study features two key advances. First, we use the newly developed CHONSi-2024 reactive force field (ReaxFF), which provides high-precision parameters specifically for CFRTP interfacial systems. Second, the atomic models are constructed based on experimental characterization data and rigorously validated across multiple parameters, including shear modulus, yield behavior, stress-strain curves, and fracture morphology, ensuring quantitative agreement with experimental results. This dataset provides a complete record of the simulations, encompassing atomic trajectories, local structural changes, interfacial stress-strain responses, and system thermodynamic behaviors. These data offer direct atomic-scale insights into the interfacial strengthening mechanisms. The generated trajectories are compatible with mainstream software for visualization and analysis. Moreover, the dataset constitutes a high-quality resource for developing machine learning force fields, building structure-property relationships, and enabling the predictive modeling and high-throughput screening of composite interfaces. This dataset is anticipated to advance the fundamental understanding of composite interfaces and facilitate the rational design of high-performance CFRTPs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010307
Oxygenated polycyclic aromatic hydrocarbons (OPAHs) are prevalent environmental contaminants with high toxicity and demonstrated tumor-promoting effects. Circadian clock genes are critical regulators of cellular homeostasis and tumorigenesis. This study investigated the role of clock genes in OPAH-induced tumor promotion using 9-fluorenone (FLO), a dominant OPAH. Human hepatocellular carcinoma (HepG2) cells were exposed to 0, 10, and 30 μmol·L−1 FLO. Cell proliferation was assessed via colony formation and EdU staining, and mRNA expression of core clock genes (Bmal1, Npas2, Nr1d1, Per2, Cry1, Dbp) was quantified by RT-qPCR. Results demonstrated that FLO exposure significantly enhanced cell proliferation and dose-dependently suppressed Nr1d1 expression. In synchronized cells, FLO dampened the amplitude of Nr1d1 mRNA oscillation. Pretreatment with SR9009, a selective Nr1d1 agonist, effectively inhibited FLO-induced proliferation. These findings indicate that Nr1d1 plays a pivotal role in the tumorigenic cascade initiated by polycyclic aromatic hydrocarbon derivatives, providing mechanistic insights into OPAH health impacts and potential intervention strategies.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010607
This study investigated the occurrence, sources, and ecological risks of polycyclic aromatic hydrocarbons (PAHs) in soil, litter, and bark samples collected from the forest-grassland transition zone of Inner Mongolia. A total of 12 PAHs were detected in soil, with concentrations ranging from 34.9 to 465.3 ng·g⁻¹ (mean 168.8 ng·g⁻¹), predominantly 3–5 ring compounds. Litter contained 14 PAHs at concentrations between 106.4 and 2262.5 ng·g⁻¹ (mean 465.1 ng·g⁻¹), dominated by 3- and 4-ring PAHs. Both living and dead bark exhibited 14 PAHs, with concentration ranges of 119.2–240.0 ng·g⁻¹ and 123.3–241.6 ng·g⁻¹, respectively, mainly composed of 4-ring PAHs. Spearman correlation analysis revealed no significant correlations among PAH concentrations across the three media (P > 0.05). Source apportionment using diagnostic ratios and principal component analysis indicated that soil PAHs primarily originated from biomass, coal, and gasoline combustion; litter PAHs from petroleum volatilization and coal/natural gas combustion; and bark PAHs from petroleum volatilization and fossil fuel combustion, with high-molecular-weight PAHs dominating. Ecological risk assessment using the risk quotient (RQ) method showed that soil PAHs posed low overall ecological risk, though certain individual PAHs exhibited higher risk. The toxic equivalent (TEQ) method indicated that dead bark was the primary accumulation medium with high carcinogenic contribution, posing elevated ecological risk. Although litter and living bark had lower PAH concentrations, their long-term accumulation effects warrant attention. These findings provide crucial scientific evidence for understanding the environmental behavior and potential risks of PAHs in cold, high-latitude regions of northern China.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025083003
To obtain freshwater from saline water and seawater, a double-layer evaporator consisting of carbon spheres and corn stalks was fabricated (abbreviated as CC). Corn stalks served as the evaporator substrate, and a mixed hydrogel of carbon spheres and polyvinyl alcohol functioned as the photothermal conversion layer. The solar-driven interfacial evaporation and desalination performance of the CC evaporator was investigated. The glucose-derived carbon spheres exhibited a uniform morphology and achieved 95% light absorption across 200–2500 nm. Under 1 sun (1 kW·m−2) irradiation, the CC with 3 cm height (CC-3) reached an exceptional evaporation rate of 3.55 kg·m−2·h−1 with a remarkable energy efficiency of 97.53%. When different wind speeds (1.5, 2, and 2.5 m·s−1) were applied, the evaporation rates further increased to 7.17, 8.92, and 10.41 kg·m−2·h−1, respectively. The evaporation rate of CC-3 for 3.5% saline was 3.46 kg·m−2·h−1. A 5-day long-time experiment exhibited stable desalination and excellent salt tolerance. Under a wind speed of 2.5 m·s−1, the evaporation rate reached 9.56 kg·m−2·h−1. In an outdoor natural light within a closed system and 2.5 m·s−1 of wind speed, the maximum evaporation rate and cumulative evaporation amount for seawater were 9.59 kg·m−2·h−1 and 66.0 kg·m−2, with no salt crystallization observed on the CC surface. These results demonstrate the potential practical application of the CC evaporator in seawater desalination.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225172
The increasing discharge of oily wastewater from oil extraction and anthropogenic activities necessitates the development of efficient oil-water separation technologies to safeguard ecological and environmental safety and ensure sustainable resource utilization. Membrane separation technology, owing to its high efficiency and operational convenience, has emerged as a viable solution for treating oily wastewater. To enhance the hydrophilic and oleophobic properties of hydrophobic separation membranes, this study employed polyvinylidene fluoride (PVDF) hydrophobic microfiltration membranes with robust mechanical properties as substrates. Through a biomimetic coating approach, dopamine (DA) was first polymerized to form polydopamine (PDA) on the membrane surface, which subsequently reacted with polyvinyl alcohol (PVA) to construct a dense hydrophilic layer, yielding modified membranes with hydrophilic/oleophobic surface characteristics. The morphology and chemical composition of the modified membranes were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). Oil-water separation performance was comprehensively evaluated by measuring water contact angle, underwater oil contact angle, emulsion flux, and oil rejection. Under optimal conditions, the modified membrane M3 exhibited a pure water flux of 4893.2 ± 70.2 L/(m²·h), an emulsion flux of 2138.1 ± 29.4 L/(m²·h) for toluene-in-water emulsion, and an oil rejection of 98.5% ± 0.1%. Simulated fouling and regeneration tests using bovine serum albumin (BSA) solution demonstrated a flux recovery rate of 92.0% for M3, indicating excellent antifouling performance. Immersion tests in acid, alkali, and salt solutions confirmed the modified membrane's outstanding chemical stability. The designed PVDF modified membrane offers advantages of simplicity, environmental friendliness, and high efficiency, showing significant application potential in oil-water separation and providing a novel strategy for membrane development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3913-3
The depletion of fossil resources necessitates the development of sustainable polymers from renewable feedstocks. Eugenol, a biomass-derived compound, serves as an ideal platform molecule due to its reactive allyl group and rigid aromatic scaffold. This study introduces a chiral Pd/Wei-Phos catalytic system for the helix-selective living polymerization of achiral eugenol-based diazo acetate monomer, delivering helical polycarbenes in high yield with controlled molecular weight (Mn), narrow dispersity (Đ), and optical activity. Post-polymerization functionalization was achieved via thiol-ene click chemistry, enabling efficient incorporation of diverse functional groups (carboxyl, ester, ketone, and diol) with high conversion (>99%). Additionally, an innovative pentaerythritol tetra(3-mercaptopropionic acid) (PETMP) cross-linked eugenol-based polycarbene system has been constructed. By controlling the polymerization degree and cross-linking density of the polymer, the mechanical properties (tensile strength can reach 15 MPa) of the cross-linked materials can be easily adjusted. Moreover, the cross-linked films exhibit excellent chiral separation ability and can be used for the enantioseparation of enantiomers of various chiral alcohols, with enantiomeric excess (ee) up to 96%. This not only contributes an innovative strategy for designing high-performance functional materials, but also provides inspiring ideas for the development of biomass-derived high-performance materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3590-8
Solid polymer electrolytes (SPEs) are promising for safer, high-energy solid-state lithium batteries, yet they suffer from low ionic conductivity (10^-5–10^-6 S/cm) and low lithium-ion transference numbers (t_Li+ ≈ 0.2) due to sluggish Li+ diffusion and incomplete salt dissociation. Polyethylene oxide (PEO) hosts exhibit high crystallinity, restricting conduction to amorphous domains, and a narrow electrochemical stability window (~3.6–3.8 V), limiting compatibility with high-voltage cathodes. This study introduces nanoscale Lewis-acid fluorides (e.g., AlF3, 5–10 wt%) into PEO–LiTFSI to address these limitations. The additive preferentially binds TFSI− anions, enhancing salt dissociation and transference number; disrupts PEO crystallinity, increasing amorphous content and segmental mobility; and forms a LiF-rich interphase that suppresses dendrites and parasitic reactions. Symmetric Li|Li cells with AlF3 cycled >3600 h without short-circuit, versus ~550 h for neat PEO. The approach extends to other polymers (polycarbonates, PVDF-HFP) and metal systems (Na, Zn, Mg), promising room-temperature conductivities beyond 10^-4 S/cm, near-unity cation transport, and dendrite-free cycling. This work establishes Lewis-acid fluorides as a versatile strategy to transform polymer electrolytes into actively engineered media for high-performance solid-state batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3741-3
Functional motifs are essential microscopic units that govern the second harmonic generation (SHG) response in nonlinear optical (NLO) materials. While nonmetal-centered motifs have been extensively studied, metal-centered motifs with outstanding comprehensive performance remain scarce. Here, we report the successful synthesis of the first seven-coordinated indium oxy-chloride and oxy-bromide polyhedra, InO6X (X = Cl, Br), by leveraging the chelating and structure-directing properties of SeO3 groups. The InO6Br polyhedra exhibit the highest polarization anisotropy and hyperpolarizability among all reported indium oxy-chloride and oxy-bromide groups. Consequently, the first non-centrosymmetric halogenated indium selenites, In2(OH)(SeO3)2Cl (ISOC) and In2(OH)(SeO3)2Br (ISOB), were obtained. Both compounds demonstrate strong SHG intensity exceeding six times that of KDP (potassium dihydrogen phosphate) and wide band gaps greater than 4.0 eV, a combination rarely observed in inorganic selenites. This work presents a viable strategy for developing new NLO functional motifs and offers valuable insights for designing novel SHG materials with enhanced performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509019
To enhance the electricity generation and decolorization efficiency of bioelectrochemical systems (BES) for azo dye wastewater, this study introduced pomelo peel biochar as anode material and flavonoid-rich Chinese herbal medicines as electron mediators (EMs) into microbial fuel cells (MFCs). The anodes were prepared by chemical activation with KOH, ZnCl2, and H3BO3, followed by polypyrrole (PPy) modification. Among the modified anodes, PPy-PPCH3BO3-CC exhibited the best electrochemical performance. The EMs were derived from aqueous extracts of Scutellaria baicalensis (Huangqin), Ginkgo biloba leaves, and Pueraria lobata (Gegen). The extract from Scutellaria baicalensis showed the highest electron transfer capability. In the MFC system equipped with the optimal anode and Scutellaria baicalensis extract, the maximum output voltage reached (587±10) mV, power density increased to 423.12 mW·m−2, Coulombic efficiency was (57.85±1.06)%, COD removal efficiency was (77.45±0.92)%, charge transfer resistance (Rct) decreased to 7.15 Ω, and methyl orange decolorization rate reached (95.86±1.12)%. These results were significantly superior to the control group, demonstrating that natural source materials can effectively enhance the performance of BES for methyl orange wastewater treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122406
The effects of different vegetation types on soil quality in the Green Heart Area of the Changsha-Zhuzhou-Xiangtan City Cluster were evaluated to provide a reference for selecting suitable afforestation species and improving forest soil quality. Seven vegetation types (mixed forest, broad-leaved forest, coniferous forest, economic forest, shrub forest, grassland, and abandoned cropland) with similar site conditions were studied. Eleven soil physicochemical indicators were measured, and soil quality was assessed using principal component analysis (PCA), Pearson correlation, total data set (TDS), minimum data set (MDS), and entropy-weighted TOPSIS methods. Results showed no significant differences in soil water content, soil bulk density, and C:N ratio among vegetation types, while significant differences were found in total porosity, capillary porosity, saturated water content, field water holding capacity, total carbon, total nitrogen, available potassium, and available phosphorus. Compared with abandoned cropland, soil water content, total porosity, field water holding capacity, saturated water content, total carbon, total nitrogen, available potassium, and available phosphorus were significantly higher, and soil bulk density was significantly lower. Mixed forest soil exhibited the highest values for field water holding capacity, total porosity, saturated water content, total nitrogen, total carbon, available potassium, and available phosphorus. Correlation analysis revealed that soil bulk density was extremely significantly negatively correlated with soil water content, total porosity, and saturated water content, and significantly negatively correlated with field water holding capacity, total carbon, and total nitrogen. Soil capillary porosity, field water holding capacity, total porosity, and saturated water content were extremely significantly positively correlated with soil nutrients, while soil bulk density showed varying degrees of negative correlation with soil chemical nutrients. Soil chemical properties and stoichiometric ratios showed varying degrees of significant positive correlation. The order of soil quality under different vegetation types was mixed forest > broad-leaved forest > shrub forest > economic forest > grassland > coniferous forest > abandoned cropland. Mixed forest soil quality was the best and significantly higher than other vegetation types, with significant differences among vegetation types. Mixed forest soil quality was clearly superior. In vegetation restoration and plantation establishment in the Green Heart Area, the principle of matching tree species to site conditions should be followed, with a focus on mixed forests to improve overall soil quality and enhance ecological benefits of artificial vegetation restoration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3769-2
Proton exchange membrane water electrolyzers (PEMWEs) are pivotal for sustainable hydrogen production, yet the corrosion-induced TiOx on porous transport layers (PTLs) introduces Schottky contact barriers and pinch-off effects, severely impeding charge transfer and efficiency. Here, a cost-effective MoIrOx coating via spray deposition and thermal treatment on Ti felts is proposed. The coating forms a conductive interlayer that establishes a Schottky barrier staircase, reducing the effective electron transfer barrier and isolating TiOx from the ionomer to mitigate the pinch-off effect. The optimal PTL achieves a current density of 3.27 A cm−2 at 2 V, surpassing uncoated Ti felts by 59.5%. The MoIrOx interlayer suppresses localized electron accumulation at the interface, enabling stable operation with ultra-low catalyst loadings by preventing direct ionomer-TiOx contact. This work demonstrates a scalable strategy to enhance PEMWE efficiency and durability while minimizing precious metal reliance, offering critical insights into interface engineering for electrolyzers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3943-y
Biodegradable polymers are promising for bioelectronic materials, yet simultaneously improving their mechanical, electrical, and optical performance remains a major challenge. Poly(3-hydroxybutyrate-co-4-hydroxyvalerate) (P34HB), a microbially synthesized polyhydroxyalkanoate (PHA), exhibits excellent biocompatibility and degradability but suffers from poor chain length control, limiting its functional performance. Here, we report a low-temperature, non-destructive supercritical ethyl alcohol-assisted polymerization (SEAP) strategy to enhance P34HB at the molecular level. Operating at 40 °C and 1500 psi, SEAP combines the permeability of supercritical CO2 with ethanol-mediated catalysis to promote in situ dehydration polymerization and efficiently remove impurities. Post-treatment, P34HB exhibits a 16% increase in number-average molecular weight, along with a record-high Young's modulus of 51.08 GPa and a 144% increase in elongation at break, overcoming the conventional trade-off between stiffness and ductility. Optical performance is also improved, with transmittance rising by 44% and refractive index increasing to 1.2. Material analyses confirm a higher ester group density and reduction of residual impurities. Electrical insulation is notably enhanced, with leakage current reduced by 50% to below 1 pA and reduced dielectric loss to 0.06. Cytotoxicity assays further verify excellent biocompatibility. This work establishes SEAP as a sustainable strategy for functionalizing P34HB, enabling its deployment in next-generation bioelectronics and flexible electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3925-5
Capacitive pressure sensors have garnered significant attention in electronic skin, human-machine interaction, health monitoring, and medical devices due to their remarkable properties like highly sensitive pressure perception, good repeatability, and rapid response capabilities. However, manufacturing capacitive pressure sensors that simultaneously achieve a broad linear detection range and high sensitivity remains a significant challenge. Herein, a novel hierarchically interlocked capacitive pressure sensor (HI-CPS) was designed by integrating a stretchable polyethylene glycol (PEG)-based nanofilm dielectric layer with hierarchically interlocked microstructures, demonstrating excellent linearity and high sensitivity over a wide sensing range. HI-CPS based on a one-layer nanofilm exhibits ultrahigh sensitivity (9.40 kPa−1) and an ultralow detection limit (0.1 Pa). When the dielectric layer comprises two layers of stacked nanofilms, the sensor not only maintains high sensitivity (3.17 kPa−1) but also achieves excellent linearity (R2 = 0.999) over a broad working range (<5 kPa), along with remarkable stability even after 10,000 cycles. Benefitting from the outstanding comprehensive performance, HI-CPS has been proven to be successfully implemented in monitoring various human biological signals, sign language recognition, and basketball shooting gesture correction. This strategy of assembling the tailored nanofilm with structural engineering has significant potential application in building high-performance pressure detection and recognition devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4053-5
The rapid and efficient removal of radioactive iodine species from water is critical for nuclear waste treatment, particularly given the short half-life of 131I (8.02 days). Traditional porous inorganic materials exhibit low uptake capacities (<1 g g−1), while porous frameworks such as MOFs and COFs achieve high capacities (>5 g g−1) but suffer from slow removal kinetics, often requiring hours to capture 80% of iodine. This study introduces nonporous naphthobipyrrole-based organic cages (NBP-Cages) that demonstrate ultrafast iodine removal from water. Among the materials tested, type-II Me-NBP-Cage and Et-NBP-Cage, prepared via reprecipitation, exhibit amorphous morphology with small particle sizes (2–6 μm) and low BET surface areas (33.4 and 2.3 m2 g−1, respectively). Despite their nonporosity, these materials achieve >99% iodine removal within seconds, outperforming previously reported sorbents. The adsorption performance correlates with particle size and morphology: amorphous, small particles with effective surface gaps show superior kinetics. The materials are recyclable; for instance, Et-NBP-Cage can be regenerated by washing with acetonitrile, maintaining removal efficiency over five cycles. This work highlights the potential of nonporous organic cages as high-performance iodine sorbents, addressing the critical need for materials that combine high uptake capacity with rapid removal kinetics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511003
Tailings dam leakage can cause secondary sudden water pollution events, imposing severe combined stress of high turbidity and heavy metal contamination on natural water bodies within a short period, threatening aquatic ecological security. Existing studies have systematically revealed the pollution characteristics and biological effects of such events, which are fundamentally distinct from natural high-turbidity water and industrial wastewater leakage. Compared with natural high-turbidity water, tailings leakage inputs finer particles with higher specific surface area, leading to more intense and prolonged turbidity stress. Meanwhile, heavy metals in tailings are more enriched than natural sediments, with higher proportions of active forms and bioavailability, causing significant bioaccumulation and toxic effects, and long-term decline in benthic community species richness. Compared with industrial wastewater leakage, tailings leakage simultaneously releases high concentrations of fine suspended solids and multiple heavy metals, forming a unique 'physical-chemical' combined stress. This synergistic effect amplifies biological toxicity through multiple pathways such as mechanical damage, light limitation, and oxidative stress, resulting in severe and often irreversible ecological damage, such as impaired fish swimming behavior and collapse of benthic community structure. Analyzing the long-term impacts of tailings leakage on aquatic ecosystems from the perspective of combined stress is helpful for providing scientific basis for emergency response and medium-to-long-term ecological risk prevention of related sudden water pollution events.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511004
To address nitrate nitrogen accumulation in aquaculture tailwater, a core-shell encapsulated immobilized denitrifying bacterial capsule containing lychee seed powder and denitrifying activated sludge was developed. The capsule's micro-morphology, bacterial activity recovery, growth, community structure changes, and diffusion coefficient dynamics during acclimation were investigated. The capsule shell exhibited a honeycomb porous structure with an average pore size of (0.25 ± 0.063) μm. Denitrifying bacterial activity recovered rapidly, with nitrate nitrogen removal efficiency stabilizing at 83.61% by day 21. Biomass within the capsules increased progressively, reaching (21.96 ± 0.28) mg·(g-pellet)−1 on day 30. The effective diffusion coefficient decreased with biomass growth, dropping to 0.232 × 10−9 m²·s−1 by day 30. Organic carbon source and encapsulation acclimation environment altered the microbial community structure; after acclimation, dominant genera were Methylobacterium (22.8%), Brevibacillus (18.1%), and Azospirillum (17.3%). Denitrifying bacteria containing nirS- and nirK- genes predominantly belonged to Proteobacteria (>99%). Genera involved in organic carbon metabolism and denitrification, including Bosea, Bradyrhizobium, Rhizobacter, and Alicycliphilus, increased in abundance. The encapsulated denitrifying bacteria exhibited short activity recovery time and excellent denitrification performance, making them suitable for denitrification of aquaculture tailwater or other low C/N ratio wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511010
Complete catalytic oxidation of methane requires catalysts with high low-temperature activity, long-term thermal stability, and excellent water resistance for industrial application. This study constructed supported Pd-Ru/S-1 bimetallic catalysts using hydrophobic all-silica zeolite Silicalite-1 as support. Systematic catalytic performance tests evaluated methane oxidation activity, thermal stability, and water resistance, while multiple physicochemical characterizations revealed the reaction mechanism. Results showed that the catalyst with Pd/Ru ratio of 2:1 (2Pd-1Ru/S-1) exhibited optimal comprehensive performance, achieving T90 of 380 °C, maintaining 94% methane conversion at 375 °C for 48 h, and demonstrating excellent water resistance. Mechanistic studies indicated that PdO is the main active phase, and the reaction follows the Eley-Rideal (E-R) mechanism. The electronic synergy between Pd and Ru enhances the interaction between PdO and the support, effectively inhibiting sintering and water poisoning of active components. This study aims to provide a new strategy for industrial catalyst design to advance the industrialization of low-concentration methane catalytic technology, addressing its climate and pollution impacts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026020207
Although the production and use of hexabromocyclododecanes (HBCDs) have been completely banned in China since December 2021, historical production activities may still leave high-concentration residual contamination in localized areas. This study investigated a typical legacy site of historical HBCDs production in eastern China. Surface and core soil samples were systematically collected both inside and outside the former plant area to characterize the occurrence, spatial distribution, and environmental burden of HBCDs, and to evaluate associated human health risks. Results showed that HBCD concentrations in soils outside the plant area ranged from below detection limit to 6.90×10² ng·g⁻¹ dw, while those inside the plant area were substantially higher, reaching up to 1.18×10⁶ ng·g⁻¹ dw. γ-HBCD was the dominant isomer; however, its relative abundance was lower than that reported in commercial HBCD mixtures and in previous studies conducted near production facilities. Outside the plant, HBCDs concentrations in soil generally decreased with increasing distance from the site, yet remained detectable at a distance of approximately 10 km (15.2 ng·g⁻¹ dw). Within the plant area, HBCDs concentrations in soil cores decreased with depth, declining from 1.08×10⁴–1.18×10⁶ ng·g⁻¹ dw in surface soils to 1.05–93.5 ng·g⁻¹ dw at depths of about 4 m. Analysis of the relative cumulative environmental burden indicated that although HBCDs loads were highest in the near-source area, they gradually accumulated over a broader spatial scale. Approximately 23.7%, 40.1%, 60.0%, and 87.1% of the total estimated burden accumulated within 2 km, 2.81 km, 4 km, and 6 km from the site, respectively. Health risk assessment indicated that oral ingestion of soil was the primary exposure pathway for different populations. Localized high-contamination zones within the plant area contributed significantly to non-carcinogenic risks, while overall risks for children outside the plant area were at acceptable levels.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022502
This study investigates the effects of different land use types on topsoil carbon (C) and nitrogen (N) contents and their spatial distribution in the lower reaches of the Sancha River Basin, a karst region of the Yunnan-Guizhou Plateau. Grid sampling collected 0–20 cm topsoil from forestland (n=23), cultivated land (n=25), and grassland (n=32). Total C and N were measured. Results showed that topsoil C content followed grassland (40.36±22.92 g·kg−1) > forestland (37.05±12.83 g·kg−1) > cultivated land (34.06±14.57 g·kg−1), while N content followed forestland (2.89±0.76 g·kg−1) > grassland (2.67±1.19 g·kg−1) > cultivated land (2.50±0.65 g·kg−1). One-way ANOVA revealed no significant differences among land use types (P>0.05). Soil C and N were significantly positively correlated across all land uses (r>0.5, P<0.001). Coefficient of variation (CV) indicated grassland had the highest C variability (0.57), while forestland showed the most stable C and N (CV=0.35 and 0.26, respectively). Cultivated land had CVs of 0.43 for C and 0.26 for N. Spatially, forestland exhibited concentrated high C values with significant N heterogeneity; grassland had higher C in southern and eastern areas but scattered distribution, with generally low and variable N; cultivated land showed uniform but lowest C and N. Land use types significantly drive topsoil C and N dynamics through vegetation input, soil disturbance, and management practices, underscoring the importance of rational land use planning for enhancing carbon sink functions and sustainable development in karst watersheds.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032401
Diazepam (DZP), a benzodiazepine anxiolytic drug, has been a persistent contaminant in fishery water environments. In China, DZP is classified as a veterinary drug that must not be detected in animal-derived foods, yet it is frequently found in aquatic products, posing significant risks to ecological health and food safety. This review systematically summarizes the current pollution status of DZP in fishery water and its adverse effects on aquatic organisms, emphasizing its persistence in both water and aquatic products. The paper comprehensively examines advances in detection techniques, including gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS), as well as treatment technologies such as adsorption, photolysis, chemical oxidation, and biodegradation. Critical gaps remain in the integration of these technologies for practical remediation. The review underscores the urgent need for enhanced monitoring and risk assessment of DZP contamination, alongside the development of more efficient and scalable treatment methods. By consolidating current knowledge, this work provides technical support for aquatic organism protection and fishery water management, and serves as a reference for future research and technological innovation in this field.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607014
Reducing ammonia emissions and recovering lost nitrogen are critical for enhancing nitrogen content in compost. Biological trickling filters, as end-of-pipe odor control, retain ammonia nitrogen in effluent, offering a reuse pathway. However, the impact of nitrogen-rich wastewater reuse within the optimal C/N range (20.0:1–30.0:1) remains unclear. This study composted biogas residue, sawdust, food waste, and mushroom residue, setting initial C/N as the control variable. Four groups were established: low C/N with nitrogen-rich wastewater (LRN), low C/N with deionized water (LRW), high C/N with nitrogen-rich wastewater (HRN), and high C/N with deionized water (HRW). Simulated wastewater (2000 mg/L NH4+-N and 2000 mg/L NO2−-N) was recycled. Results showed no inhibition of final maturity; pH (8.17–8.48) and seed germination index (GI) (90.85%–122.96%) met organic fertilizer standards. HRN reduced cumulative total greenhouse gases, N2O, and NH3 by 20.32%–30.35%, 0.67%–53.38%, and 52.14%–62.15% compared to LRN and LRW. Although HRN emissions were slightly higher than HRW (total GHGs +4.56%, NH3 +4.99%), HRN final nitrogen content (4691.27 mg/kg) exceeded HRW (4514.96 mg/kg), attributed to sufficient carbon enhancing microbial assimilation. Conversely, low C/N with nitrogen-rich wastewater increased NH3 and N2O emissions (LRN vs LRW: +26.43% and +112.99%) due to carbon limitation. Thus, high initial C/N with nitrogen-rich wastewater reuse effectively reduces gaseous nitrogen loss and greenhouse gas emissions while maintaining compost maturity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3965-5
Liquid crystal elastomers (LCEs) have emerged as a promising material platform for soft robotics, effectively integrating programmable molecular orientation with the inherent flexibility of elastomers. This unique combination enables significant, reversible deformations responding to external stimuli, including heat, light, electric, and magnetic fields. Due to these characteristics, LCEs serve as an ideal material system for bridging biological principles with engineered soft robotic applications, enabling the development of adaptive and multifunctional systems with enhanced biomimetic capabilities. However, the mechanisms of bioinspired motion and the effective integration of biomimetic functions in LCE-based robots remain insufficiently explored. This review systematically examines recent advances in LCE-based biomimetic soft robots, focusing on multimodal actuation strategies, including contraction, crawling, rolling, jumping, swimming, and plant-inspired motions. It highlights integrated functional enhancements achieved via innovative material compositions, structural designs, and advanced manufacturing techniques. These developments have enabled novel robotic functionalities, including programmable actuation, self-healing and recycling, color morphing and camouflage, and tunable bioinspired surface characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3901-2
This work presents a cracked template and vacuum metal evaporation strategy for fabricating structurally randomized copper (Cu) mesh films. Regulating the internal stress distribution within the coating during template cracking enables controlled fabrication of Cu mesh films with varying discrete degrees of mesh aperture area and distinct probability distributions of metal line inclination. The influence of structural parameter randomization on properties was systematically investigated, encompassing higher-order diffraction energy homogenization, optoelectronic performance, and electromagnetic interference shielding effectiveness (EMI SE). Results demonstrate that increasing structural randomization effectively suppresses higher-order diffraction energy, achieving a reduction to −3.93 dB in normalized higher-order diffraction energy. Furthermore, the Cu mesh film exhibited minimal degradation on imaging system performance, with resolution decreasing only marginally from 80.6 to 71.8 lp/mm. Simultaneously, the most randomized Cu mesh film demonstrates an ultra-low sheet resistance (3.31 Ω/sq), high visible light transmittance (88.7% at 550 nm), an exceptional figure of merit (FoM=913.69), and robust EMI SE within the X-band (average SE of 33.18 dB). These findings underscore that metal mesh films incorporating structural randomization offer an effective strategy for enhancing EMI shielding in high-performance optoelectronic imaging systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3989-4
Organic-inorganic hybrid metal halides (OIMHs) based on Cu(I) ions exhibit broad application prospects in stimulus-responsive luminescent materials due to their rich structural diversity and highly adjustable electronic states. However, achieving sensitive and broad-temperature-range thermal responses remains a significant challenge. Here, we synthesize a zero-dimensional warm white-light emitting OIMH, MPC-W ((C9H20N2O)4(Cu2I4)(Cu2I6)(H2PO2)2), using 4-morpholinopiperidine (4-MP) and CuI. MPC-W features hybrid structures of [Cu2I4]2− and [Cu2I6]4−. The coexistence of three luminescent mechanisms—organic cluster luminescence (CL), self-trapped exciton (STE) emission of [Cu2I6]4−, and cluster-centered (CC) state luminescence of [Cu2I4]2−—endows MPC-W with temperature- and excitation-wavelength-dependent dynamic luminescence. From 77 to 297 K, the luminescence color continuously tunes from blue to cyan, green, yellow-green, and white. In the range of 217–463 K, MPC-W exhibits abnormal luminescence enhancement with increasing temperature. Upon chemical stimuli, MPC-W reversibly transforms into blue-emitting MPC-B ((C9H20N2O)Cu2I4) and yellow-emitting MPC-Y ((C9H18N2O)7Cu8I8). These dynamic luminescent properties position MPC-W for applications in temperature sensing, optical anti-counterfeiting, and password locks. This work provides new insights for developing wide-temperature-responsive multifunctional intelligent luminescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3946-2
High energy-density lithium–sulfur (Li–S) batteries with rapid intermediate conversion and forbidden shuttle effect require superior electrocatalysts with tunable catalytic activity. In this protocol, binary FeNi3 alloy nanoparticles homogeneously embedded within carbon nanosheets (FeNi3/CNS) are synthesized to regulate the conversions of sulfur species. Time of flight-secondary mass ion spectroscopy reveals a significantly improved catalytic effect of binary FeNi3 alloy compared to bare Ni, which is confirmed by a larger Li2S amount generated during in situ X-ray diffraction measurement. Further anode characterization validates efficient shuttling suppression and good lithium metal protection. In Li–S batteries, electrochemical tests demonstrate a remarkable rate capability of 852 mAh g−1 at 3.0 C, and outstanding long-term cycle at 1.0 C (639 mAh g−1 after 500 cycles). Even under a wide operation temperature range (−15–60 °C), Li–S batteries exhibit stable cycling with high specific capacities under high current rates. Moreover, Li–S batteries using FeNi3/CNS attain a maximum areal capacity of 5.60 mAh cm−2 under ~4.0 mg cm−2 sulfur. This study highlights the advantages of adopting binary or multi-component metal alloys as electrocatalysts and points out the research directions to advance Li–S batteries into practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3982-6
Skin wounds are refractory due to antibiotic-resistant bacterial infection. Although photodynamic therapy (PDT) offers noninvasiveness, high efficiency, and no drug resistance, its therapeutic effect is constrained by the complex structure of wound tissue and diffuse drug distribution. The proinflammatory cytokine tumor necrosis factor-like weak inducer of apoptosis (TWEAK) regulates tissue repair by engaging its receptor Fn14, which is highly expressed in wounds. In this study, we developed a novel photosensitizer, the selenoviologen-TWEAK conjugate (SeV-Tp), to enhance selective enrichment and synergistically promote wound healing. In vitro analyses demonstrated that SeV-Tp, under visible light, generated high levels of reactive oxygen species, resulting in potent antibacterial activity against both Gram-positive and Gram-negative bacteria. Notably, SeV-Tp selectively bound to Fn14 and amplified fibroblast activation via photodynamic cooperation. In a mouse model of antibiotic-resistant Pseudomonas aeruginosa-infected wound, SeV-Tp accelerated healing by reducing bacterial burden, modulating the immune microenvironment, promoting collagen deposition, and stimulating hair follicle regeneration. Moreover, SeV-Tp preferentially accumulated within wound tissues with minimal adverse effects. SeV-Tp represents a strategy that selectively enriches and harnesses synergistic benefits from both components, positioning SeV-Tp as a promising photosensitizer for the treatment of refractory wounds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3915-8
Reactive oxygen species (ROS)-based antibiofilm therapy is limited by short ROS lifetime, restricted diffusion, and biofilm barriers. We designed a bacteria-targeted piezoelectric heterostructure (U-B/F) comprising boronic acid-functionalized UiO-66(Hf) (U-B) and carboxylated fullerene (C70-COOH). Boronic acid groups enable selective bacterial binding. Under ultrasound (US), the Z-scheme heterojunction enhances piezoelectric response and charge separation, amplifying sonocatalytic ROS generation. Fullerene acts as a peroxidase mimic, converting endogenous H2O2 into cytotoxic hydroxyl radicals (•OH). Additionally, favorable band alignment allows US-induced electron transfer from bacteria to U-B/F, disrupting bacterial electron transport and energy metabolism. Transcriptomic profiling confirmed bioenergetic collapse and oxidative stress. In vitro, U-B/F achieved 99.99% elimination of planktonic methicillin-resistant Staphylococcus aureus (MRSA) and 92.41% removal of mature biofilms. In MRSA-infected diabetic mice, U-B/F under US irradiation accelerated wound healing by eradicating infection, alleviating inflammation, and promoting tissue regeneration. This work provides a rational strategy for designing multifunctional nanomaterials integrating bacterial targeting, dual ROS catalysis, and electron transfer interference to combat biofilm-associated infections.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60657-3
Fe-Mn catalysts have attracted considerable attention for industrial Fischer-Tropsch synthesis (FTS) due to their ability to modulate product spectra. Carbon adsorption and permeation on catalyst surfaces are critical elementary steps in the in situ formation of active iron carbide phases. Here, density functional theory (DFT) calculations systematically investigate the atomistic structures, thermodynamic stabilities, and electronic properties of carbon-deposited Fe-Mn alloy surfaces at the early stage of carburization. These surfaces exhibit distinct thermodynamic sensitivity to carbon atoms adsorbed on the surface and permeating into interstitial sites. By combining DFT with minima-hopping structural searches, we demonstrate that the initial stage of carbon permeation cannot trigger surface reconstruction to form iron carbide phases. The addition of manganese thermodynamically hinders carbon permeation. Although deposited carbon atoms modulate the electronic structure of metals, manganese retards the shift of d-band centers toward those of bulk iron carbide phases. This study provides atomic-scale insight into the in situ evolution of Fe-Mn catalyst surfaces during carbon deposition, indicating that manganese promoter has a noticeable effect on carbon permeation.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0003
Phosphorus and transition metal-modified ZSM-5 zeolites were prepared via incipient wetness impregnation and characterized by XRD, N2 adsorption-desorption, and pyridine-IR spectroscopy. The effects of modified zeolites on catalytic pyrolysis of n-heptane, 3-methylhexane, and methylcyclohexane were systematically investigated, revealing the structure-activity relationship between acid properties and catalytic performance. Results indicate that phosphorus and transition metal modification can regulate the L/B acid ratio of ZSM-5, which significantly influences product distribution. An excessively high L/B acid ratio promotes hydrogen and coke formation, leading to pore blockage and reduced conversion, whereas an appropriate L/B acid ratio facilitates mild dehydrogenation, enhancing ethylene and propylene yields. Reactant conversion followed the order: n-heptane > 3-methylhexane > methylcyclohexane. Efficient conversion of 3-methylhexane and methylcyclohexane requires catalysts with high L acid amount, strong Brønsted acid amount, optimized L/B acid ratio, as well as high specific surface area and micropore specific surface area. This study provides critical insights for designing high-efficiency alkane pyrolysis catalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608007
The Minjiang River Basin, subjected to combined pollution from domestic, agricultural, and industrial sources, has become a typical sensitive area for studying the environmental behavior of emerging contaminants such as antibiotics. This study conducted a cross-year comparative analysis of the composition and concentrations of antibiotics in water samples from nine sampling sites during the dry season in November 2022 and 2024. The findings revealed: 1) After the implementation of the "National Action Plan for Reducing Antimicrobial Use in Livestock", the detection concentrations of tetracycline antibiotics (TCs) decreased (e.g., doxycycline concentrations dropped from 7.75 ng/L to undetectable levels), and the mixed risk quotient (MRQ) across the entire basin transitioned from medium to low risk. However, lincomycin (up to 4.6 ng/L), clarithromycin (1.3 ng/L), and florfenicol (0.6 ng/L) have emerged, indicating an increasing hidden ecological risk from substitution. 2) High-concentration antibiotic zones transferred from urban residential areas in 2022 to intensive aquaculture zones and upstream reservoir areas in 2024. The reduction in dry-season water flow intensified pollutant accumulation, synergistically enhancing the effects of tidal drag. Additionally, the conversion of agricultural land to aquaculture ponds led to increased use of alternative drugs (e.g., sulfamethazine), while policy interventions mitigated the exacerbation of urban antibiotic pollution by construction land. This study elucidates the migration patterns of antibiotic pollution under the synergistic effects of policy regulation and natural processes, emphasizing the need to address hidden risks of substitute drugs and the driving role of land-use changes, providing scientific basis for watershed-scale risk assessment and precise management of emerging pollutants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4084-1
Alkali metal halides such as KCl are typical insulators with broad bandgaps, exhibiting poor luminescence. Ion doping can enhance their luminescence, but the mechanism of ultrafast diffusion and structural evolution remains unclear. Here, Sb3+ was doped into a KCl matrix via a room-temperature grinding route. Varying Sb3+ concentration induces a structural evolution from KCl:Sb3+ to 0D inorganic metal halides (IMHs) K3SbCl6. The resulting K3SbCl6 exhibits broad-spectrum yellow emission with near-unity photoluminescence quantum yield (PLQY). The luminescence mechanism is attributed to the 3P1→1S0 transition of Sb3+ ions. Furthermore, a room-temperature solid-liquid interface diffusion method enables ultrafast single-crystal growth of K3SbCl6 in only 20 seconds, with stable luminescence. The material demonstrates excellent temperature sensing performance in the 50–310 K range, achieving a maximum relative sensitivity of 9.99%/K. Additionally, K3SbCl6 shows application potential in information encryption, flexible composite fluorescent films, and white light-emitting diodes. This study provides new insights into ultrafast synthesis of high-performance luminescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4014-3
Laser-induced graphene (LIG) methods, including photothermal and photochemical approaches, are promising for flexible electronics yet face distinct limitations. Photothermal methods often produce graphene with uncontrolled structural and functional properties, while photochemical methods are restricted to a narrow range of precursors. To address these limitations, we propose a pressure-driven LIG (P-LIG) method that uses transient laser-generated pressure fields as an additional control parameter to improve graphene quality. An integrated framework combining ultrafast pump–probe interferometric imaging, large-scale molecular dynamics (MD) simulations, and explainable artificial intelligence (XAI) was developed to investigate this approach. Time-resolved measurements reveal the generation of transient pressure fields during femtosecond laser irradiation of polyimide films, confirming pressure as an intrinsic feature of the process. MD simulations under controlled pressure conditions demonstrate that pressure promotes the nucleation and stacking of graphene layers, resulting in more continuous and planar graphitic networks. XAI analysis quantitatively identifies the important contributions of pressure. These results confirm that the transient pressure introduced by the P-LIG method plays a key role in promoting more ordered, continuous, and planar graphene networks, and enhancing structural integrity and material quality beyond traditional methods. This provides a practical pathway for improving the performance and reliability of LIG-based flexible electronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3968-3
The commercialization of perovskite solar cells (PSCs) is hindered by stability issues primarily stemming from interfacial defects. This study employed a machine learning (ML) screening approach and constructed a learnable weighted ensemble model (LWEM) to enhance prediction robustness for identifying effective interface passivation materials. The ML model predicted that an imidazolium salt-based interface modifier, 1-benzyl-3-methylimidazolium tetrafluoroborate (BMT), is suitable for planar n-i-p PSCs. Subsequent experimental results demonstrated that BMT provides synergistic passivation via an 'ion-coordination dual-lock' mechanism that significantly suppresses non-radiative recombination, facilitates hole extraction, and improves the quality of the perovskite film. The BMT-modified devices achieve a significant increase in power conversion efficiency (PCE) from 22.45% to 24.89% under AM 1.5G illumination, and attain a high PCE of 41.31% under 1000 lux light emitting diode (LED) indoor lighting. Additionally, the modified devices exhibit outstanding stability under long-term storage and maximum power point tracking conditions. This work provides a strategy for developing high-performance and highly stable PSCs for both indoor and outdoor applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4073-2
Precise control of molecular orientation in nonfullerene acceptors is crucial yet challenging for achieving both high efficiency and long-term stability in organic solar cells (OSCs). Here, we report a molecular dimerization strategy to regulate orientation and charge-transport anisotropy in ambipolar M-series acceptors. Using the edge-on-oriented small-molecule acceptor MC16 as a model, dimerization into DMC16 effectively suppresses over-aggregation and molecular diffusion while inducing a predominant face-on packing orientation. This orientation transition reverses the transport anisotropy from lateral to vertical directions, enabling balanced ambipolar charge transport and efficient carrier extraction. Consequently, DMC16-based OSCs exhibit a markedly enhanced power conversion efficiency together with outstanding thermal stability, retaining 94% of the initial efficiency after 1800 h at 85 °C and 74% after an additional 1000 h at 120 °C. When introduced as a third component in PM6:M36 ternary blends, DMC16 further optimizes blend morphology and stability, delivering an efficiency of 19.04% and over 15% in 10.15 cm2 modules. These results demonstrate that dimerization-induced molecular orientation control provides an effective pathway to simultaneously enhance efficiency, stability, and scalability in OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4146-8
The conventional trial-and-error approach for the research and development (R&D) of high-performance super-hydrophilic coatings presents long-standing challenges, including data scarcity, unclear structure-activity relationships, and lack of design guidelines. In this study, an innovative multi-model framework that synergistically integrates a specialized polymer large language model (PolyLLM) and a polymer machine learning model (PolyML) for intelligent R&D of super-hydrophilic coating systems is designed and demonstrated. During the hydrophilic polymer research phase, the multi-model leverages the domain-specific insights and chemical tool capabilities of the fine-tuned PolyLLM to systematically screen 852 hydrophilic monomers and generate 3880 hypothetical polymer architectures. By utilizing the PolyML, the multi-model enables precise performance predictions and quantitative evaluations of feature importance to facilitate efficient high-throughput screening of optimal structures from the generated polymer database. Experimental validation confirms that the multi-model achieves a mean absolute error (MAE) below 10% across various polymer property prediction tasks compared to experimental data. This approach leads to the rapid discovery of hydrophilic polymers with exceptional anti-swelling and wear-resistance. In developing super-hydrophilic coatings, the multi-model effectively combines PolyLLM's guidance for large-scale synthesis with PolyML's capabilities for precise formulation optimization and curing parameter adjustments. The effectiveness of multi-model is demonstrated by the accelerated development of high-performance anti-fogging coatings for swim goggles and optical films with outstanding water- and wear-resistance that significantly outperform leading commercial products. This multi-model offers a flexible approach for advanced polymer coatings, leading to a seamless connection between laboratory research and industrial development.