SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4267-y
The synthesis of two-dimensional MBenes from MAB-phase ceramics is impeded by uncontrolled etching kinetics that compromise structural integrity and yield. This study introduces a vacuum molten salt strategy to regulate space-charge accumulation during the selective removal of Al from Mo2AlB2, producing honeycomb-like architectures. The vacuum environment suppresses oxidative side reactions and modulates ionic transport, enabling precise control over etching depth and morphology. The resulting Mo2AlB2 exhibits exceptional electromagnetic wave absorption, with a minimum reflection loss of -56.3 dB at 2.4 mm and an effective absorption bandwidth of 6.8 GHz. These metrics surpass conventional etching-derived MBenes by a factor of 2.5 in attenuation capacity. The space-charge-regulated mechanism is elucidated through in situ spectroscopic and computational analyses, revealing that vacancy-induced charge redistribution governs the etching front propagation. This work establishes a scalable route for high-purity MBenes with tailored porosity, addressing critical bottlenecks in energy absorption and catalytic applications. The vacuum molten salt approach eliminates the need for hazardous HF, offering a safer and more environmentally benign pathway for industrial translation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4269-4
Self-assembled molecular interlayers (SAMs) are promising hole-selective contacts for high-efficiency organic solar cells (OSCs) due to their well-defined energy alignment and minimal parasitic absorption. However, their intrinsically limited mechanical robustness often leads to structural degradation and performance loss under mechanical deformation, restricting their application in flexible devices. Here, we report a nanoparticle-reinforced self-assembled composite interface that simultaneously enhances mechanical reliability and optoelectronic performance. Uniformly dispersed SiO2 nanoparticles are introduced as high-modulus reinforcing building blocks without disturbing molecular self-assembly. In contrast to NiOx nanoparticles, which suffer from aggregation and parasitic absorption, SiO2 nanoparticles exhibit excellent dispersion and optical transparency, enabling formation of a structurally compatible hybrid interface. Mechanistic studies reveal that SiO2 nanoparticles redistribute interfacial stress and form dynamic hydrogen-bond networks with phosphonic acid groups of 2PACz, providing efficient energy dissipation during cyclic deformation. Meanwhile, modulation of interfacial polarity extends the crystallization time window of the active layer, resulting in enhanced molecular ordering and improved charge transport. As a result, devices based on the SiO2/2PACz composite interface achieve a power conversion efficiency of 20.14% for rigid devices and 19.30% for flexible devices, placing the flexible devices among the highest-performing flexible OSCs reported to date, while retaining over 90% of their initial efficiency after repeated bending cycles. This work establishes a general strategy for overcoming the trade-off between electronic selectivity and mechanical robustness in ultrathin self-assembled molecular interfaces, providing design insights for high-performance flexible organic optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4202-3
Carbon dots (CDs) with absorption in the second near-infrared window (NIR-II, 900-1700 nm) hold promise for tumor theranostics, yet existing synthesis methods often involve complex procedures, harsh conditions, or lack precise control. Here we report a 'self-photooxidation-restructuring' strategy that enables structural reorganization of the carbon core in CDs, achieving a significant redshift of absorption into the NIR-II region. Under ultraviolet (UV) light irradiation, the precursor (B-CDs, absorption in UV region) generates singlet oxygen, which self-oxidizes aldehyde groups and the carbon skeleton of B-CDs to stronger electron-withdrawing carboxyl groups and carbon radicals, respectively. These processes facilitate the formation of new C=C bonds between isolated aromatic domains, thereby transforming B-CDs into novel CDs (N-CDs) characterized by enhanced donor-acceptor interactions and a redshift in absorption toward the NIR-II window. Various experimental data, including high-resolution XPS, FTIR, NMR, EPR, have proved the proposed formation mechanism. The novel N-CDs afforded a high photothermal conversion efficiency of up to 71.33%, which enabled 1064 nm laser-activated photoacoustic imaging (PAI)-guided photothermal therapy (PTT) in tumors. This work opens a new avenue for the synthesis and modulation of CDs in the NIR-II region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4367-4
Single-crystalline Cs3Cu2I5 has attracted considerable interest owing to its excellent scintillation performance and favorable stability. Nevertheless, second phases induced by peritectic reactions during melt growth give rise to deteriorated scintillation properties and promote crystal cracking. In this work, the effects of non-stoichiometric ratios of raw material (n(CsI)=0.57, 0.62, and 0.63) on the crystallization behavior and scintillation properties were systematically investigated. The results show that the crystal quality is optimal at n(CsI)=0.62, featuring high transparency, absence of macroscopic inclusions, and cracking free, with a PLQY of 79.3%. Temperature-dependent photoluminescence verifies the self-trapped exciton emission mechanism with strong exciton-phonon coupling, giving an exciton binding energy of 473.9 meV and a Huang-Rhys factor S of 79.8. The as-grown crystal exhibits an optimized light yield of 24,380 photons/MeV, an energy resolution of 3.8% for 137Cs (662 keV) γ-rays, a dominant decay time of 957 ns, and excellent linear response in the medium-to-high energy region. Precise regulation of the raw material stoichiometry can effectively suppress the formation of second phases, yielding high-quality Cs3Cu2I5 single crystals whose comprehensive performance demonstrates promising application potential in γ-ray detection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4369-1
Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries for large-scale energy storage due to sodium's abundance and low cost. Among cathode materials, polyanionic compounds like Na3V2(PO4)2O2F (NVPOF) offer high energy density and dual voltage plateaus at ~3.6 and 4.0 V, but suffer from low electronic conductivity and sluggish Na+ diffusion. Here, we report a dual-modulation strategy combining high-valence Nb5+ doping and polydopamine-derived carbon coating to synthesize Na3V1.94Nb0.06(PO4)2O2F-C (NVPOF-Nb-C) via a hydrothermal route. X-ray diffraction and Rietveld refinement confirm that Nb5+ doping induces slight lattice expansion without altering the tetragonal I4/mmm framework. Density functional theory calculations reveal that Nb5+ doping optimizes the crystal structure and reduces the Na+ diffusion barrier, while the uniform carbon coating enhances electron transport. Consequently, NVPOF-Nb-C exhibits remarkably improved electrochemical performance, including high reversible capacity, excellent rate capability, and ultralong cycling stability. In a full cell with hard carbon anode, it delivers a high energy density of 487.2 Wh kg−1 at 1C and retains 91.51% capacity after 3000 cycles at 20C. This work provides a synergistic strategy to overcome the intrinsic limitations of polyanionic cathodes for practical SIB applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4106-8
Perovskite/organic tandem solar cells (PO-TSCs) have emerged as a compelling photovoltaic architecture to transcend the Shockley-Queisser limit of single-junction devices. By monolithically stacking a wide-bandgap (WBG) perovskite top cell and a narrow-bandgap (NBG) organic bottom cell, PO-TSCs enable broad spectral utilization and reduced thermalization loss, offering a viable pathway toward efficiencies beyond 30%. Their solution processability, compatibility with orthogonal solvents, and potential for lightweight, flexible, and semi-transparent modules further make them attractive for building integrated and portable electronics. However, the realization of high-performance PO-TSCs critically depends on precise carrier regulation across the entire multilayer stack, where inefficient charge transport, recombination losses, and interfacial bottlenecks often limit the overall power conversion efficiency (PCE) and stability. This review systematically examines the carrier-regulation strategies essential for advancing PO-TSCs, focusing on defect and phase-control in WBG perovskites, the design of optically transparent and electrically efficient interconnecting layers, and the enhancement of charge generation and collection in organic subcells. The integration of these approaches has recently enabled efficiencies exceeding 26%, demonstrating the rapid progress of the field. Ultimately, we conclude with an outlook on the remaining challenges in scalability, operational stability, and manufacturability, providing a roadmap for future research toward commercially viable tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3617-x
Macrophages are pivotal in infection resolution and tissue repair via dynamic M1-to-M2 phenotypic polarization. Although various nano-biomaterials can modulate macrophage polarization, achieving sequential M1-to-M2 transition using a single nanoformulation remains challenging. Here, we propose a strategy employing transition metal carbide/nitride (MXene) nanosheets, internalized by macrophages, as the sole regulator to induce sequential polarization. Under a rotating magnetic field, the high electrical conductivity and magnetoelectric activity of endocytosed MXene generate electrical signals and reactive oxygen species (ROS), driving M1 polarization. Upon magnetic field removal, the inherent bioactivity of MXene facilitates repolarization to the M2 phenotype. Mechanistically, this transition involves inhibition of the NF-κB signaling pathway and activation of the JAK-STAT signaling pathway. In vivo, MXene nanosheets under on-off rotating magnetic field stimulation enabled sequential M1-to-M2 polarization, promoting bacterial clearance and tissue regeneration in infected wounds. This two-step sequential strategy targeting macrophages offers a promising therapeutic approach for infected wound healing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3746-x
The polyanionic compound Na3V2(PO4)2O2F (NVPOF) possesses a stable three-dimensional framework, high theoretical specific capacity, and favorable operating voltage, yet its sluggish Na+ diffusion kinetics and low electronic conductivity impede industrial application. This study proposes a dual regulation strategy combining carbon coating and heat treatment temperature to synergistically enhance crystallinity and electrochemical performance. NVPOF@C-400 and NVPOF@C-600 were synthesized via in-situ dopamine hydrochloride coating followed by heat treatment at 400 °C and 600 °C, respectively. Carbon coating at 600 °C significantly improved crystallinity and increased electronic conductivity by three orders of magnitude through the carbon layer's conductive network. The ~4.5 nm carbon layer effectively suppressed abnormal grain growth and secondary crystallization aggregation at high temperatures, maintaining uniform particle size of approximately 0.36 μm, which shortens Na+ diffusion pathways and prevents ion transport obstruction. Consequently, NVPOF@C-600 delivered a high discharge capacity of 102.5 mAh g−1 at 20 C and retained 96.5% capacity after 10,000 cycles. In a full-cell configuration with hard carbon (HC), NVPOF@C-600//HC achieved an impressive 89.3% capacity retention after 9,000 cycles. This work provides critical insights for practical implementation of high-performance NVPOF cathodes in sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3725-1
Conductive hydrogel-based stretchable electronics have been extensively investigated, with strain sensors being the most prominently studied. While mechanical properties significantly affect device performance, the systematic correlation between specific mechanical parameters and sensing performance remains rarely explored. This work compares the influences of Young’s modulus and mechanical hysteresis on sensing performance between highly entangled PAM-Li and double-network PAM-Li-Agar-3 strain sensors. Owing to the brittle agar network, which imparts a higher Young’s modulus and pronounced mechanical hysteresis to the double-network PAM-Li-Agar-3 hydrogel, the corresponding sensor requires a greater driving force for deformation and yields signals with poor reproducibility. In contrast, the PAM-Li hydrogel, characterized by highly entangled polymer chains, exhibits a lower Young’s modulus and negligible mechanical hysteresis. Consequently, signals from the PAM-Li strain sensor demonstrate enhanced sensitivity and stability. Therefore, this work demonstrates that a low Young’s modulus and minimal mechanical hysteresis are critical factors for achieving superior sensing performance in strain sensors, as systematically validated through comparative analyses across diverse application scenarios.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507085
This study investigates the spatiotemporal differentiation of suspended particulate matter (SPM) characteristics, sources, and their impacts on water quality between the Middle Route (closed artificial channel) and East Route (open natural water system) of the South-to-North Water Diversion Project. Thirty sampling sites (13 on the Middle Route, 17 on the East Route) were established, and samples were collected during dry and wet seasons. Water quality parameters and SPM characteristics were analyzed, including particle size distribution, total suspended solids (TSS), chlorophyll a, and stable carbon and nitrogen isotopes. Results show that the Middle Route maintains good and stable water quality, with SPM dominated by coarse particles (>63 μm, 61.43%–94.68%), total phosphorus (TP) <0.01 mg·L−1, and a significant positive correlation between chlorophyll a and coarse particles (r=0.60), indicating algal aggregation dominates particle formation. In contrast, the East Route exhibits high and fluctuating nitrogen and phosphorus concentrations, with SPM dominated by fine particles (<20 μm, 51.26%–88.61%), TP ranging from 0.03 to 1.11 mg·L−1, and a positive correlation with fine particles, suggesting significant external inputs. Carbon and nitrogen isotope analysis reveals that Middle Route SPM primarily originates from autochthonous algae (contribution >46.75%), while East Route SPM is influenced by both terrestrial C3 plants and algae. The distinct engineering and management approaches of the two routes lead to significant differences in SPM characteristics and sources, thereby affecting water quality dynamics. The Middle Route requires an 'algal reduction and hydrodynamic optimization' strategy to control algal-derived coarse particle deposition, whereas the East Route benefits from 'retention-sedimentation and wetland purification' to reduce external fine particles and pollutant inputs. This research provides theoretical support and practical guidance for differentiated SPM management in long-distance water diversion systems.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506021
To elucidate the seasonal variation in cadmium (Cd) accumulation in ratoon rice and its relationship with root surface iron plaque, this study compared Cd concentrations in brown rice and the characteristics of iron plaque components (amorphous Fe, Am-Fe; crystalline Fe, Cry-Fe) between the main and ratoon crops of six rice varieties under different stubble heights. A field experiment was conducted in a Cd-contaminated paddy in Liuyang, Hunan (soil total Cd: 0.56 ± 0.06 mg·kg⁻¹). Ratoon crop treatments included low stubble (20 cm) and high stubble (60 cm). Brown rice Cd concentrations varied by variety, season, and stubble height. Low stubble generally increased brown rice Cd in the ratoon crop compared to high stubble; high stubble reduced Cd in most varieties relative to the main crop. Health risk assessment indicated that low stubble in the ratoon crop posed higher non-carcinogenic risk than the main crop and high stubble, while carcinogenic risks exceeded acceptable levels across all treatments. Iron plaque Am-Fe and Cry-Fe concentrations in the ratoon crop were generally lower than in the main crop, with Am-Fe consistently exceeding Cry-Fe. In the main crop, total Fe, Am-Fe, and Cry-Fe on root surfaces were significantly negatively correlated with brown rice Cd (P < 0.05), but correlations were not significant in the ratoon crop. High stubble reduced Cd accumulation and non-carcinogenic risk in most varieties, yet carcinogenic risk remained. Iron plaque significantly impeded Cd uptake in the main crop but its effect weakened in the ratoon crop. Selecting low-Cd-accumulating varieties and optimizing stubble height are key strategies for safe ratoon rice production in Cd-contaminated areas.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507043
Municipal sludge with high moisture content and strong viscosity tends to form a dense crust during conventional rotary drum drying, reducing heat and mass transfer efficiency and prolonging drying time. This study proposes a thermal steel ball-enhanced rotary drum drying method that introduces high heat capacity, high thermal conductivity steel balls to achieve synergistic contact heat conduction and mechanical disturbance. An evaluation system incorporating dimensionless moisture ratio (MR), drying rate (DR), characteristic drying time (tdry), effective moisture diffusivity (Deff), and volumetric evaporation intensity (U) was established. Results show that compared with conventional drying, steel ball-enhanced drying increased maximum drying rate (DRmax) by 22.59%–41.19%, U by 38.06%–93.43%, and shortened tdry by 27.56%–48.30%, with more pronounced advantages under high load conditions. Deff was significantly higher throughout the process, with maximum increase up to 48.30%, indicating that ball rolling and collision effectively disrupt the crust and promote moisture migration. Mechanistic analysis reveals that the performance enhancement arises from the dual action of thermal-mechanical coupling and mechanical disturbance, which enhances local heat flux via contact conduction and dynamically renews the drying interface, shortening diffusion paths. This study elucidates the heat and mass transfer mechanisms of thermal steel ball-enhanced sludge drying, providing theoretical support and technical reference for efficient sludge volume reduction and dryer design optimization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025121001
Ion chromatography (IC) is the core analytical method for qualitative and quantitative determination of anions in complex water environments, and its separation efficiency highly depends on the performance of the stationary phase. This review systematically summarizes recent progress in the preparation and functionalization of IC stationary phases, addressing the urgent need for high selectivity and sensitivity in water anion analysis. The characteristics of organic polymer-based and inorganic-based matrices are compared, highlighting the advantages of polymer matrices such as poly(methacrylate), poly(vinyl alcohol), polystyrene-divinylbenzene (PS-DVB), and ethylvinylbenzene-divinylbenzene (EVB-DVB) in terms of wide pH tolerance (e.g., pH 0–14 for PS-DVB) and organic solvent compatibility, which allow the use of strong acid or base eluents. Various functionalization strategies are discussed, including the introduction of quaternary ammonium groups, hydrophilic modifications, and grafting of functional layers, which enhance separation selectivity and detection capability. The review also covers the development of hybrid stationary phases and the application of IC in monitoring trace pollutants in water, such as bromate, chlorite, chlorate, fluoride, and nitrate, as regulated by Chinese standards (GB 5749—2022). Future trends are projected, focusing on novel materials for precise identification and high-throughput monitoring. The paper provides a comprehensive reference for the design of high-performance stationary phases, emphasizing the importance of matrix selection and surface chemistry in achieving robust and sensitive anion analysis.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604004
Tire wear particles (TWPs) are emerging pollutants and constitute the dominant type of microplastics (MPs) in urban stormwater runoff, accounting for up to 90% of MPs in some cases. They are characterized by small size, high mobility, complex composition, and significant toxicity. Current research on TWPs remains fragmented, lacking a comprehensive understanding of their environmental behaviors and pollution control in aquatic systems. This review systematically analyzes the enrichment and vectoring roles of TWPs for coexisting pollutants, and their environmental fate, including ecotoxicological impacts, detection methodologies, release of intrinsic additives, and aggregation and sedimentation behaviors. Drawing on insights from other microplastic studies, the paper explores control technologies across the pollution pathway—source, transport, and terminal treatment—and proposes feasible management strategies. Key findings indicate that TWPs can adsorb heavy metals and organic contaminants, with adsorption capacities influenced by aging processes. Their aggregation is governed by solution chemistry, with critical coagulation concentrations varying with ionic strength and pH. The release of additives such as zinc and benzothiazoles is significant, posing ecological risks. Future research should focus on real-water aggregation mechanisms, additive release under natural conditions, long-term performance of treatment facilities like constructed wetlands under TWPs stress, enzymatic degradation pathways, and integration of AI, big data, and IoT for cost-effective detection and risk modeling. This review provides a scientific basis for developing targeted pollution control measures for TWPs in aquatic environments.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604025
To meet the minute-level early-warning requirements for odor and multi-pollutant emissions at waste treatment facilities, this study proposed a multivariate short-term time-series prediction framework applicable to multi-tier scenarios covering source and boundary points (i.e., workshops and plant boundaries). Based on continuous online monitoring data with a 5-second resolution, a long short-term memory (LSTM) model using a sliding-window and recursive multi-step prediction strategy was constructed to jointly model odor concentration (OU) and pollutants including VOCs, NH3, H2S, and CH3SH (mg/m³). An evaluation protocol aligned with environmental supervision practice was established, incorporating mean absolute error (MAE), root mean square error (RMSE), goodness-of-fit (R²), skill scores (SS) relative to a persistence baseline, and threshold-based error stratification to characterize uncertainty during peak emission periods. The results showed that at workshop monitoring sites with relatively stable operating conditions, VOCs, NH3, H2S, and CH3SH exhibited a high goodness of fit and low prediction errors. In contrast, at boundary sites affected by plume arrival delays and diffusion-dilution non-stationarity, OU and VOCs displayed significantly amplified errors during peak episodes, and the skill score advantage over the baseline became unstable at certain sites. Stratified analysis consistently revealed that non-peak periods outperformed peak periods, indicating that event-driven fluctuations were the main sources of error. Accordingly, this study suggested incorporating exogenous variables such as wind speed and direction, ventilation and gate access control, and operational rhythms, along with peak-sensitive loss functions, into the model to enhance its capacity to characterize and provide early warnings for transient emission pulses. Overall, this study established a reusable methodological baseline and evaluation paradigm for minute-scale multi-pollutant prediction, providing quantitative support for the operational management and source-to-boundary coordinated control of waste treatment facilities.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225191
Mg3Sb2-based materials, featuring a unique layered crystal structure, exhibit a favorable combination of low thermal conductivity, high Seebeck coefficient, and decent carrier mobility, establishing them among the most promising mid-temperature thermoelectric systems under active investigation. However, p-type Mg3Sb2 derivatives demonstrate a comparatively lower thermoelectric figure of merit (zT) compared to their n-type counterparts. Enhancing the zT performance of p-type Mg3Sb2 is therefore essential for the development of high-efficiency thermoelectric devices based on this material system. This review systematically summarizes the critical factors governing the thermal transport properties of p-type Mg3Sb2, including intrinsic characteristics such as chemical bonding and crystal structure, as well as extrinsic parameters such as carrier concentration, mobility, point defects, microstructure, and temperature dependence effects. Furthermore, it highlights recent advances in strategies designed to optimize thermal conductivity (κ) and improve zT, mainly including point defect engineering (such as Mg-site doping, Sb-site doping, dual-site co-doping, as well as doping-assisted composite modification), low-dimensional and nanostructural design, and advanced preparation technologies. Experimental studies demonstrate that these targeted strategies, particularly the synergistic introduction of multi-scale defects, can effectively suppress phonon propagation and significantly reduce lattice thermal conductivity (κL). Consequently, substantial improvements in the overall zT of p-type Mg3Sb2-based materials have been realized, providing a robust scientific and technical foundation for accelerating the practical application of Mg3Sb2-based thermoelectric devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3882-y
Organic semiconductor crystals with well-defined morphologies are highly desirable for high-performance optoelectronic devices, yet precise control over their growth remains a challenge. Here, a novel donor-acceptor (D-A) molecule, TQDPT, has been successfully developed, featuring a rigid π-conjugated acceptor core composed of thiazoloquinoxaline and naphthalene, coupled with phenylphenothiazine donors. This study presents a temperature-mediated crystallization strategy for precisely controlling the morphology and carrier transport properties of TQDPT single crystals. By systematically investigating the growth kinetics across a controlled temperature range (15–35°C), we reveal a distinct transition from needle-like structures to plate-like crystals, with tunable average widths spanning from around 2.8 to 30.1 μm. This morphological evolution is driven by temperature-dependent molecular diffusion and nucleation kinetics. Significantly, the plate-like crystals grown at 25°C exhibit an order-of-magnitude enhancement in mobility compared to needle-like counterparts, while higher temperatures of 35°C yield broader crystals with improved carrier mobility and device stability. This work highlights the critical role of temperature as a pivotal parameter in the dimensional and electronic optimization of organic crystals, offering an attractive approach to optimize functional materials for advanced optoelectronics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026020803
The governance of new pollutants is a major strategic deployment made by China after fully building a moderately prosperous society and embarking on a new journey to comprehensively build a modern socialist country. Guided by the new development philosophy, it adheres to high-quality development, promotes economic structural transformation, and safeguards people's livelihood. This paper divides China's new pollutant governance process from the beginning of the 21st century to 2035 into four progressive stages: compliance-driven local exploration, systematic construction of strategic transformation, comprehensive implementation and in-depth layout, and long-term control and modernization improvement. It systematically reviews the development of management systems, technical standards, and basic research in each stage, clarifying the strategic position of new pollutant governance in coordinating development and security. At the critical transition between the 14th and 15th Five-Year Plans, the paper summarizes achievements and shortcomings based on the implementation of the Action Plan for the Governance of New Pollutants, proposing optimization paths for the 15th Five-Year Plan period. Key recommendations include establishing a national data sharing platform to integrate monitoring, toxicological, and governance data, implementing a diversified evaluation system to distinguish basic research from management support research, and guiding differentiated local implementation to avoid a one-size-fits-all approach. The paper emphasizes the need for international promotion to enhance China's discourse power in global environmental governance, and suggests building a multi-dimensional international communication system. These measures aim to improve the quality and efficiency of new pollutant governance, providing theoretical and practical guidance for building a Beautiful China.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010604
Groundwater is a vital component of Beijing's water supply, yet elevated sulfide concentrations restrict its utilization. This study employed principal component analysis (PCA) and absolute principal component-multiple linear regression (APCS-MLR) to apportion sulfide sources and quantify their contributions in the middle and lower reaches of the Chaobai-Wenyu alluvial-proluvial fan. Sulfur and oxygen isotopes (δ34S and δ18O) were used to identify sulfate sources and discern anthropogenic versus natural influences. Results showed that high-sulfide groundwater predominantly occurred in Na-type water, with sulfide accumulation from desulphidation widespread, particularly in Shunyi and within the first, second, and third aquifers, independent of wet/dry seasons. Isotopic analysis indicated sulfate mainly originated from evaporite dissolution, and sulfides from desulphidation were of geological background origin. PCA extracted four principal components: leaching-enrichment (F1), natural dissolution of iron-manganese oxides (F2), water desulphidation (F3), and CaF2 dissolution equilibrium (F4). F3 exhibited the highest factor loading for sulfide (0.418), while other components had small negative loadings. APCS-MLR revealed F3 contributed 21.32% of sulfide, while indigenous sources (e.g., acid-volatile sulfide dissolution, elemental sulfur disproportionation, geothermal activity, well casing materials) contributed 63.66%. Overall, sulfide in the study area is a geological background factor, with limited anthropogenic influence.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3819-7
Selective solar-driven aerobic oxidation of biomass derivatives into valuable chemicals under ambient conditions is pivotal for sustainable chemical manufacturing but faces challenges from the conflict between O2 activation kinetics and selective C–H bond cleavage. This work demonstrates a spatial decoupling strategy in a precisely-engineered 2D/2D g-C3N4/ZnIn2S4 architecture, where ZnIn2S4 domains selectively activate O2, while adjacent g-C3N4 modulates electron transfer to O2 and tailors 5-hydroxymethylfurfural (HMF) binding configuration for selective C–H bond cleavage. This enables efficient selective conversion of HMF to 2,5-diformylfuran (DFF) via ambient aerobic photooxidation. When used alone, ZnIn2S4 produces mixed reactive oxygen species (·O2−/·OH) due to uncontrolled electron transfer during O2 activation. In-situ spectroscopy, Kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations demonstrate that the 2D/2D heterojunction, driven by its directed electric field, selectively activates O2 into ·O2− at ZnIn2S4 domains while suppressing ·OH generation by moderate electron transfer, mitigating over-oxidation. Adjacent g-C3N4 domains precisely anchor HMF via –OH group interactions, steering selective DFF formation. This spatial decoupling achieves a remarkable HMF-to-DFF photo-conversion rate of 1517.5 μmol g−1 h−1 with 99.4% selectivity under ambient air, outperforming many reported state-of-the-art catalysts and maintaining durable cycling performance. The work establishes a spatial decoupling principle to overcome O2 activation kinetics and site competition thermodynamics, paving the way for advanced catalyst design for sustainable energy and the environment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3798-x
Ulcerative colitis (UC) is a chronic inflammatory disorder of the colorectal mucosa, where conventional enema therapies suffer from poor retention and limited inflammation modulation. Here, we report a highly fluid probiotic-containing enema solution (s-BSA-Fe+EcN) integrating bovine serum albumin (BSA), Fe2+, and probiotic Escherichia coli Nissle 1917 (EcN). The solution's high fluidity enables comprehensive coverage of irregular colorectal mucosa. Upon encountering reactive oxygen species (ROS)-rich inflamed lesions, Fe2+ mediates H2O2 scavenging and hydroxyl radical generation, triggering BSA crosslinking and in situ gelation into a conformal hydrogel (h-BSA-Fe+EcN). This targeted adhesion mitigates oxidative damage to host tissues and preserves probiotic viability. In a porcine model, endoscopic imaging confirmed inflammation-targeted gelation in vivo. In a dextran sulfate sodium-induced mouse colitis model, h-BSA-Fe+EcN demonstrated excellent therapeutic efficacy, reducing disease activity index and restoring colonic architecture. This strategy addresses the dual challenges of fluid perfusion and rapid ROS-responsive gelation, offering an advanced transanal treatment for UC.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506064
To address the challenges of high salinity, recalcitrance, limited mass transfer, and coating detachment in traditional anodes for textile wastewater treatment, a porous RuO2@r-TiO2 nanotube array (NTA) anode was fabricated via anodic oxidation, electrochemical reduction, and thermal decomposition. A flow-through electrochemical oxidation system was constructed using this anode and a graphite felt cathode. The material's morphology and physicochemical properties were characterized by SEM, XRD, and XPS. Congo red (CR) was used as a model pollutant to evaluate degradation performance under various conditions. Optimal conditions were identified as current density 5 mA·cm−2, permeate flux 480 L·(m2·h)−1, initial CR concentration 0.15 mmol·L−1, and NaCl concentration 75 mmol·L−1. Under these conditions, the system achieved 91% decolorization within 20 min and 82% mineralization within 60 min. Mass transfer tests showed a rate constant of 2.23×10−4 m·s−1 in flow-through mode, three times higher than conventional mode, with active chlorine and H2O2 production increased by 32.8% and 66.7%, respectively. Radical quenching experiments indicated that singlet oxygen (1O2) was the primary reactive species. The degradation mechanism was proposed based on quenching and UV spectral analysis. The system achieved >90% decolorization for five typical dye pollutants with an energy consumption of only 0.16 kWh·m−3. Cyclic voltammetry confirmed long-term stability. These findings provide theoretical support for applying electrochemical advanced oxidation to high-salinity textile wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510004
Ammonium salt crystallization-induced blockage of the regenerative heat exchanger in regenerative thermal oxidizers (RTOs) remains a critical operational challenge, particularly in pharmaceutical applications where NH4Cl constitutes up to 70% of the fouling deposits. This study employs computational fluid dynamics (CFD) to systematically simulate six purging configurations, varying injection angle and pipe arrangement, and quantifies purging effectiveness via a novel evaluation method based on characteristic observation planes. Using the Realizable k-ε turbulence model coupled with a porous media model, we analyze the velocity distribution and low-velocity failure zones at the gas chamber–regenerator interface. Results demonstrate that a single-pipe 45° oblique injection achieves the highest effective purging area of 57.6%, a 35.7% improvement over conventional horizontal purging. Increasing pipe diameter significantly enhances flow uniformity, yielding an efficiency gain of approximately 40%, outperforming mere increases in gas velocity. A synergistic optimization strategy is proposed, prioritizing high-performance purging structures with coordinated parameter tuning. The recommended configuration—single-pipe 45° injection, 280 mm pipe diameter, and 14 m·s−1 gas velocity—achieves 88.2% purging efficiency without additional fan power, representing a 45.6% improvement over conventional modes. These findings provide a theoretical basis and engineering solution for RTO purging system design and operational optimization.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0031
The high-temperature behavior of biomass ash critically influences gasifier operational efficiency. This study investigates the differential high-temperature behaviors of corn straw ash (CSA) and wheat straw ash (WSA) using an intelligent ash fusion analyzer, high-temperature rotating viscometer, X-ray diffraction (XRD), SEM-EDS, and FactSage thermodynamic simulations. Both ashes contain high K2O (>30%) and exhibit flow temperatures below 1300 °C. Despite higher K2O and lower SiO2, CSA exhibits a higher flow temperature (1241 °C) than WSA, attributed to elevated CaO (10.39%) and MgO (7.33%) that promote formation of high-melting silicates (K2MgSiO4, K2Ca2Si2O7, CaSiO3). In contrast, WSA with lower CaO (4.92%) and MgO (2.82%) tends to form low-melting potassium silicates. At high temperatures, both slags are typical crystalline slags, with viscosity rising sharply below a critical temperature. For CSA, rapid nucleation and coarsening of silicate crystals (e.g., KAlSiO4 grain size increases from 20.5 nm at 1350 °C to 192.9 nm at 1050 °C) cause abrupt viscosity increase. For WSA, a high P2O5 content (10.05%) induces a 'chemical dilution effect', leading to persistent KAlSiO4 during cooling and elevated viscosity, especially at the final cooling stage. This study elucidates how ash chemical composition governs high-temperature phase equilibrium and non-equilibrium kinetics, thereby macroscopically affecting ash fusion and rheological behavior, providing a theoretical basis for deeper understanding of biomass ash high-temperature characteristics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60649-4
To achieve efficient conversion of lignin-derived phenolic compounds into high-value hydrocarbon fuels, a series of NiCo bimetallic catalysts with N-doped biochar and Al2O3 composite supports (NiCo/NC-Al2O3) were designed and synthesized. Comprehensive characterizations (XRD, TEM, XPS, H2-TPD) revealed the superior catalytic activity in the hydrodeoxygenation (HDO) of lignin-derived phenolic compounds. The optimized Ni8Co2/NC-Al2O3 catalyst exhibited good metal dispersion and excellent hydrogen dissociation adsorption capacity. Under mild reaction conditions (240°C, 1 MPa H2, 4 h), it achieved complete conversion of guaiacol and 99.9% selectivity to cyclohexane, significantly outperforming monometallic Ni10/NC-Al2O3 and Co10/NC-Al2O3 catalysts. Comparative studies indicated a synergistic effect between Ni and Co, where the introduction of Co effectively promoted aromatic ring hydrogenation and C−O bond cleavage. The catalyst maintained high activity after four reuse cycles, demonstrating outstanding structural stability. This study elucidates the regulatory mechanism of the Ni-Co synergistic effect on catalytic performance, providing new insights for the development of efficient non-noble metal HDO catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025092801
Urban river water quality is critically influenced by outfall discharges, yet the seasonal dynamics of dissolved organic matter (DOM) and its linkage to water quality remain poorly constrained. This study collected outfall water samples seasonally during 2023–2024 along the Nanfei River and Banqiao River in Hefei, Anhui Province. Parallel factor analysis of excitation-emission matrices identified three fluorescent components: fulvic acid-like C1, tryptophan-like (protein-like) C2, and terrestrial humic-like C3. Seasonal variations were pronounced: protein-like C2 dominated in winter and spring, whereas summer and autumn showed lower C2 proportions due to rainwater dilution and urban nonpoint source runoff inputs. Water quality indices decreased in summer and autumn, primarily attributed to dilution by rainfall runoff. Fluorescence index (FI > 1.9) and biological index (BIX > 1.0) indicated predominantly autochthonous DOM sources. During summer and autumn, humification index (HIX) and specific UV absorbance (SUVA) increased, while spectral slope ratio (SR) decreased, suggesting enhanced terrestrial and urban runoff influence. Significant positive correlations were observed between protein-like C2 and terrestrial humic-like C3 with water quality parameters, indicating their utility as precise indicators of pollution sources and seasonal water quality variations. These findings provide a scientific basis for integrated management of urban outfalls.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606003
Membrane separation technology, offering high separation efficiency, low energy consumption, and operational flexibility, is promising for lithium recovery. However, selective lithium extraction from complex matrices such as salt lake brines and battery leachates remains challenging. Traditional membrane development relies on empirical trial-and-error, suffering from low efficiency and the permeability-selectivity trade-off. This review systematically delineates machine learning (ML)-based frameworks for membrane material development, including high-throughput rational screening, inverse design of synthesis protocols, and high-fidelity performance prediction. We elucidate how advanced ML algorithms decipher structure-activity relationships at the molecular level, enabling breakthroughs in performance ceilings and guiding bottom-up fabrication of next-generation membranes. Critical challenges are assessed: scarcity of high-quality standardized datasets, limited model interpretability, and poor generalizability to industrial scales. Future directions emphasize physics-informed hybrid models, open-source global databases, and full-process system optimization to bridge laboratory innovation and industrial deployment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606021
To provide a theoretical basis for energy-saving combustion of regenerative thermal oxidizers (RTOs), this study analyzes energy nodes during RTO operation, refines heat balance accounting, and establishes an overall energy system. Taking a three-chamber RTO as the research object, the enthalpy of exhaust gas at different stages is calculated, and a whole-process heat balance model is developed to systematically analyze exhaust gas preheating, combustion, heat recovery, and heat loss transfer. An improved energy accounting method is proposed to address dynamic heat exchange inside heat accumulators, coupling of multiple gas streams, and boundary heat loss under complex conditions. The longitudinal temperature distribution function of heat accumulators is introduced to overcome difficulties in heat accounting within the accumulator chamber. A thermodynamic system covering 11 key internal energy nodes is constructed. Combined with design characteristics of RTO operation across industries, the application scope of the overall energy system is analyzed; equilibrium terms can be adjusted according to actual conditions, ensuring wide applicability. Validation via an RTO energy system for a glove manufacturing plant demonstrates that outlet temperature prediction accuracy improves from 14.3% to 2.8%, providing a theoretical foundation for future intelligent energy-saving combustion research.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3774-3
Lithium-air capacitor batteries (LACBs) integrate the rapid charge-discharge capability of supercapacitors into conventional lithium-oxygen batteries, significantly enhancing power density. However, their cycling stability remains unsatisfactory. In this study, we incorporated redox mediators (RMs) into an LACB featuring a dual-cathode configuration. This design facilitates sustained electron transfer between the electrode and Li2O2/Oxygen, thereby delaying RM deactivation caused by electrode passivation and improving overall electrochemical performance. The RM-enhanced battery achieved over 250 cycles at 2 mA cm−2 with a limited capacity of 0.5 mAh cm−2, while exhibiting a 0.54 V reduction in charging voltage at 0.1 mA cm−2 compared to the RM-free system. Furthermore, application of an aluminum foil sealing technique enabled a power density of 13.8 mW cm−2 at 6 mA cm−2, overcoming mass transport limitations inherent in open-cell configurations. We also investigated the influence of oxygen barrier films with varying barrier capabilities on LACB performance. Results indicate that films with superior oxygen resistance better maintain a clean capacitor electrode surface, thereby providing more stable electron supply to the RMs and enhancing rate capability and cycling performance. These findings underscore the potential of redox mediators in improving the performance and longevity of LACBs, offering a promising strategy for their future development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3880-8
Formaldehyde oxidation reaction (FOR) demonstrates significant potential in energy conversion and chemical synthesis, yet developing catalysts for efficient operation at high current densities remains a challenge. Herein, we fabricated a Cu/Cu2O heterostructure nanowire catalyst on copper foam (Cu/Cu2O@CF) via interface engineering and investigated its FOR performance. Electrochemical tests show that Cu/Cu2O@CF exhibits excellent activity: it achieves 100 mA cm−2 at an ultra-low potential of −0.05 V (vs. RHE), outperforming most reported catalysts. Notably, this catalyst overcomes the deactivation limitation of conventional Cu-based catalysts above 0.5 V, maintaining a current density of 735 mA cm−2 at 0.6 V with excellent stability during long-term electrolysis. SCN−-induced Cu0 poisoning experiments confirm that Cu/Cu2O@CF retains a Cu/Cu2O mixed structure at 0.6 V, where Cu0-Cu+ synergy dominates its high activity. Density functional theory (DFT) calculations reveal two key advantages of this structure: it weakens OH− adsorption to avoid active site occupation, and reduces C–H bond cleavage barriers while promoting H* combination into H2. Product analysis shows Faradaic efficiencies for formate and H2 production are both ~100%. When coupled with the hydrogen evolution reaction (HER), the system's hydrogen production energy consumption is as low as 0.57 kWh m−3 H2, much lower than traditional water electrolysis. This work elucidates the regulatory mechanism of interface engineering on the FOR performance of Cu-based catalysts, expands the application of Cu-based heterostructures in high-current FOR, and guides the development of industrial-grade electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3862-x
Hexagonal boron nitride (hBN) is indispensable for next-generation electronics and quantum technologies, yet controlled synthesis of isotopically engineered hBN with macroscopic scalability and atomic-level precision remains challenging. Here, we present a plasma-enhanced chemical vapor deposition (PECVD) method using elemental boron (B) and nitrogen (N) precursors to achieve wafer-scale growth and precise isotopic control of hBN films. High-quality hBN films are synthesized on Cu substrates via optimized B evaporation and N2 plasma activation. The growth mechanism involves an oxygen-mediated pathway for B transport and a layer-by-layer (Frank-van der Merwe) mode for multilayer formation. By employing isotopically enriched B powders (10B and 11B) and N2 gases (14N2 and 15N2), we demonstrate tunable isotopic compositions with phonon mode shifts quantitatively matching harmonic oscillator predictions. Furthermore, we realize unprecedented in-plane h10BN-h11BN heterostructures through dynamic B source switching during growth. This PECVD strategy establishes a transformative synthesis platform merging industrial-scale production capacity with atomic-scale isotopic precision, enabling new opportunities to engineer thermal transport, optical response, and quantum coherence in two-dimensional materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607006
This study evaluates the global warming potential (GWP) of three typical air pollution control device (APCD) configurations in municipal solid waste (MSW) incineration under ultra-low emission standards. The configurations are APCD1 (SNCR+SDS+DS+ACI+FF), APCD2 (SNCR+SDS+DS+ACI+FF+SCR+WS), and APCD3 (SNCR+SDS+DS+ACI+FF+WS+SCR). Life cycle assessment (LCA) was applied to quantify GWP. Results indicate that APCD3 exhibits the highest GWP due to increased electricity consumption, yet it achieves the lowest pollutant emissions among the three. APCD1 shows the highest NOx emissions, contributing significantly to GWP, and requires technological upgrades. APCD2 consumes more resources but does not proportionally reduce emissions, suggesting inefficiencies. Electricity consumption is the dominant factor influencing GWP across all processes; reducing electricity use and improving energy efficiency are critical for mitigating environmental impact. The study recommends further research on CO2 reduction strategies and adoption of more efficient DeNOx technologies to align MSW incineration with ultra-low emission and low-carbon goals.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607023
The rapid population growth and accelerating urban development have made the comprehensive utilization of municipal sludge (MS) an urgent challenge. MS contains substantial organic matter and essential nutrients for crop growth, making it a promising soil amendment for the ecological restoration of mine waste rock. However, research evaluating the impact of MS application on soil health and ecological safety from a soil microbiology perspective remains understudied. Therefore, this study investigated the effects of MS and composted municipal sludge (CMS) on the ecological restoration of mine waste rock soil through pot experiments. High-throughput sequencing technology was employed to analyze changes in soil microbial community structure and diversity. Finally, network analysis and correlation heatmaps were utilized to elucidate the microbial driving mechanisms. The results indicated that after MS and CMS application, organic matter content increased from 20.38 g/kg (Level 3) to 38.52 g/kg (Level 2). The levels of available nitrogen, phosphorus, and potassium rose from Level 4, 6, 2, to Level 1, 4, 1, respectively. Fresh weight, aboveground height, root length, and stem diameter of ryegrass all increased significantly. Venn diagram and heatmap analyses indicated that lower application rates (<1.5 kg/m²) enhanced microbial community richness and diversity. This study confirms municipal sludge as an effective amendment for mine waste rock soil. It is recommended to limit application rates below 1.5 kg/m² in practical mine ecological restoration projects, with particular attention to long-term dynamics of heavy metals and salinity to ensure safe and sustainable land reuse.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510017
Municipal solid waste (MSW) is a significant source of urban carbon emissions. This study integrates life cycle assessment (LCA) and system dynamics (SD) to construct a multi-subsystem LCA-SD model covering economy, population, waste generation, transportation, treatment, and resource utilization, using Fuzhou City as a case study. The model was validated against historical data and uncertainty analysis. Carbon emissions from MSW transportation, treatment, and resource utilization during 2013–2023 were calculated, and emission trends under seven reduction scenarios for 2024–2035 were predicted. Results show that Fuzhou's MSW treatment evolved through three stages: 'landfill+incineration', 'treatment structure adjustment', and 'incineration+kitchen waste resource utilization', corresponding to emission growth, fluctuation, and reduction periods. In 2023, total net carbon emissions were 1.07×10^6 t CO2-eq, with incineration being the largest contributor (9.93×10^5 t), followed by transportation (2.93×10^4 t), leachate treatment (2.14×10^4 t), and kitchen waste treatment (7.90×10^3 t, negative emission). Scenario analysis indicates that without further measures, carbon neutrality cannot be achieved. Synergistic enhancement of kitchen waste separation and incineration power generation efficiency can significantly boost reduction, potentially achieving carbon neutrality by 2032. The study provides a dynamic accounting and scenario assessment framework for low-carbon transition of urban solid waste systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042703
This study investigated phosphorus (P) exchange at the sediment-water interface and its microbial driving mechanisms in aquaculture ponds of Chinese mitten crab (Eriocheir sinensis). Using diffusive gradients in thin films (DGT), labile P concentrations in the upper sediment were significantly higher than in overlying water from late July to mid-August and in October, indicating sediment acts as a P source during these periods. The duration of aquaculture was a key factor; P diffusion flux declined from late July to mid-August and further decreased by October. Analyses of labile Fe, P-Fe correlations, and bacterial community composition and function suggested that dissimilatory Fe(III) reduction mediated by Fe-reducing bacteria and chemical Fe(III) reduction driven by sulfate-reducing bacteria metabolites were important mechanisms for P release. Additionally, bacterial-driven organic P mineralization and inorganic P dissolution contributed. The results indicate a high risk of P release from sediment to overlying water from late July to mid-August, potentially significantly affecting water P concentrations. Therefore, controlling sediment P release during this period is crucial.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042504
This study investigated the effect of co-aging with common cations/anions and humic acid (HA) on the combined use of Vallisneria natans (VN) and lanthanum-modified bentonite (LMB) for controlling phosphorus (P) release from sediment. Results showed that co-aging significantly reduced the phosphate adsorption capacity of LMB, with the maximum unit adsorption capacity decreasing by 33.8% compared to the unaged material. Under the combined application of VN and unaged LMB, P in sediment could still be released into pore water via dissimilatory iron(III) reduction mediated by iron-reducing bacteria and chemical reduction of iron(III) induced by sulfate-reducing bacteria metabolites, subsequently migrating to overlying water. However, the combined treatment effectively inhibited P release, achieving an average reduction efficiency of 57.1% for dissolved reactive phosphorus (SRP) in overlying water and 74.0% for labile P in sediment (measured by DGT) at an LMB dosage of 89 g·m−2. Co-aging with common ions and HA diminished the P control efficiency of the combined treatment, primarily due to reduced phosphate adsorption capacity of LMB. Therefore, mitigating the negative effects of co-aging is crucial for enhancing the long-term P control performance of the VN-LMB combined technology.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608013
Eutrophication and cyanobacterial blooms threaten aquatic ecosystems and drinking water safety globally. This study evaluated the efficacy of a compound algicide (PQGA-126, PAC, and red soil) combined with submerged plants (Vallisneria natans and Hydrilla verticillata) for suppressing blooms and restoring eutrophic water. Indoor static experiments used algae-laden water from Nanhu Lake, Gongqingcheng, Jiangxi. Six treatments were established: control, V. natans alone, H. verticillata alone, algicide alone, algicide + V. natans, and algicide + H. verticillata. Results demonstrated that combined treatments significantly reduced total nitrogen (TN), total phosphorus (TP), chlorophyll-a (Chl-a), and turbidity, markedly lowering eutrophication within a short period. The combined approach outperformed single-plant treatments, with algicide + V. natans achieving the greatest reduction in the comprehensive trophic state index. Additionally, the algicide significantly enhanced V. natans growth rate and H. verticillata catalase (CAT) activity, indicating species-specific physiological responses. These findings suggest that integrating compound algicide with submerged plants, particularly V. natans, offers a promising strategy for rapid and effective eutrophic water remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3951-4
Silicon anodes offer an ultrahigh theoretical capacity (4200 mAh g−1) but suffer from >300% volumetric expansion during cycling and unstable solid electrolyte interphase (SEI) formation, leading to rapid capacity fading. Here, we design a hierarchical composite p-cSi@aSi@MgSiN2@C featuring a porous crystalline-amorphous silicon core (p-cSi@aSi), an in-situ MgSiN2 transition layer, and an outer nitrogen-doped carbon shell. The 3D interconnected pores accommodate volume expansion, while amorphous silicon enables isotropic lithiation-induced strain, eliminating crystalline phase transition barriers. The MgSiN2 layer transforms into a tough Li3N-rich SEI with ultra-fast ion channels, and the carbon shell provides mechanical confinement and electronic conductivity. This synergistic interface engineering achieves an initial coulombic efficiency (ICE) of 81.4%, a charge transfer resistance of 16.4 Ω after 200 cycles (64% reduction), and a Li+ diffusion coefficient of 1.72×10−11 cm2 s−1. The anode delivers 1719.3 mAh g−1 at 0.2 C after 200 cycles and 823.8 mAh g−1 at 0.5 C after 500 cycles. The molten salt electrolysis synthesis achieves a current efficiency of 68.12% and specific energy consumption of 12.76 kWh kg−1, with an estimated electricity cost of 1154.69 USD ton−1, only 20% of commercial Si/C anodes. This work resolves the ICE-cycle life trade-off and provides a scalable, cost-effective approach for next-generation high-energy batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4014-3
Laser-induced graphene (LIG) methods, including photothermal and photochemical approaches, are promising for flexible electronics yet face distinct limitations. Photothermal methods often produce graphene with uncontrolled structural and functional properties, while photochemical methods are restricted to a narrow range of precursors. To address these limitations, we propose a pressure-driven LIG (P-LIG) method that uses transient laser-generated pressure fields as an additional control parameter to improve graphene quality. An integrated framework combining ultrafast pump–probe interferometric imaging, large-scale molecular dynamics (MD) simulations, and explainable artificial intelligence (XAI) was developed to investigate this approach. Time-resolved measurements reveal the generation of transient pressure fields during femtosecond laser irradiation of polyimide films, confirming pressure as an intrinsic feature of the process. MD simulations under controlled pressure conditions demonstrate that pressure promotes the nucleation and stacking of graphene layers, resulting in more continuous and planar graphitic networks. XAI analysis quantitatively identifies the important contributions of pressure. These results confirm that the transient pressure introduced by the P-LIG method plays a key role in promoting more ordered, continuous, and planar graphene networks, and enhancing structural integrity and material quality beyond traditional methods. This provides a practical pathway for improving the performance and reliability of LIG-based flexible electronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4003-7
The escalating electromagnetic (EM) pollution necessitates the development of high-performance microwave absorbers (MAs) with integrated functionalities. However, it is still a difficult problem to integrate more related high performances into the designed MAs. Herein, a sustainable strategy was reported for fabricating three-dimensional (3D) porous magnetic Ni@C-anchored carbon foams (Ni@C/CFs) with abundant heterointerfaces and magnetic Ni@C nanoparticles using 3D porous chitosan foams and Ni-nitrilotriacetic acid chelate (Ni-NAC) as precursors. The modulation of carbonization temperature and concentration of Ni-NAC solution contributed to the tunable carbon graphitization, Ni crystallinity and magnetic Ni@C nanoparticles loading, which effectively improved their EM properties and EM wave absorption performances (EMWAPs). The optimized 3D porous magnetic Ni@C/CFs not only exhibited exceptional EMWAPs with a minimum reflection loss (RL min) of −27.58 dB and an ultra-wide effective absorption bandwidth (EAB) of 7.20 GHz, but also presented efficient thermal insulation and strong antibacterial activity (>95% inhibition against E. coli), which mainly originated from their excellent magnetic-dielectric synergies and unique 3D hierarchical porous structures. Consequently, this work delivers a coherent design strategy for next-generation multifunctional absorbers with potential applications in EM protection, thermal management, and adaptive stealth technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4143-9
High-Ni (Ni ≥ 0.9) layered cathodes are being developed to endure high-voltage operations above 4.5 V to boost energy density. However, they face exacerbated chemo-mechanical and electrochemical degradation under high-voltage operation, primarily due to excessive lattice strain and phase distortion during cycling. Here, we engineer a high-Ni, Co-free cathode featuring a multicomponent complex doping-modulated bulk structure, coupled with surface modification via a multifunctional atomic layer deposition-coated LiAlO2 layer. Such a unique framework achieved by surface-to-bulk integrated modification can not only greatly prevent lattice stress-induced mechanical degradation but also effectively mitigate the accumulation of by-products due to surface side-reactions. Moreover, the LiAlO2 nanoshell with exceptional ion conductivity markedly enhances the sur-/interfacial Li-ion migration kinetics, thus rendering low electron/ion-diffusion resistance. The developed cathode breaks through existing voltage constraints without compromising on performance, achieving an exceptional balance between capacity and cycle stability during operation at 4.8 V. Notably, the pouch-type cells utilizing graphite and Li metal anodes demonstrate excellent cyclability under demanding conditions, even operating at high charging cut-off voltages of 4.5 and 4.6 V, respectively.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4123-0
Aqueous aluminum-ion batteries (AAIBs) are promising for large-scale energy storage due to safety, sustainability, and theoretical high capacity. However, sluggish electron/ion transport in conventional cathodes limits rate capability. Here, we first propose high-entropy engineering of metal oxides (HEOs) as cathodes in AAIBs, leveraging the 'cocktail effect' and abundant electron transport pathways to enhance rate-capacity. Atomic-level interactions between different metal atoms broaden the d-band with reduced electronic level degeneracy, facilitating rapid electron transport, achieving one of the best rate capabilities (119.4 mAh g−1 at 10.0 A g−1) among metal-oxide cathodes. The disordered layered oxides formed with a high-entropy framework alleviate electrostatic repulsion between aluminum ions and the fixed lattice, mitigating structural degradation and imparting excellent cycling stability (over 95.1 mAh g−1 after 500 cycles at 2.0 A g−1). The optimized HEO-Cr cathode (Fe0.6Co0.6Ni0.6Mn0.6Cr0.6O4) exhibits outstanding rate performance and cycling stability. DFT simulations and electrochemical tests reveal that multi-transition metal incorporation, bandgap narrowing, and unique lattice structure drastically enhance electron transport efficiency. The layered phase formed after cycling, based on a high-entropy framework, overcomes challenges from high charge density aluminum ions, significantly enhancing cycling stability. This work paves the way for high-performance AAIBs and other aqueous multivalent metal ion batteries by rationally designing high-entropy engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4208-8
Sodium-ion batteries (SIBs) are emerging as a cost-effective alternative to lithium-ion batteries due to the abundance of sodium resources. Among cathode materials, P2-type layered oxides (Na_xTMO_2) offer high ionic conductivity and rate capability but suffer from low initial sodium content and Na+/vacancy ordering, leading to structural degradation and capacity fading. This study proposes a synergistic strategy combining high sodium content with Li/Mg co-doping to enhance the cycling stability of P2-type cathodes. The high sodium content increases the sodium reservoir, reducing the depth of desodiation for a given capacity, while Li/Mg co-doping mitigates Na+/vacancy ordering and stabilizes the crystal structure. The optimized cathode exhibits significantly improved cycling performance, retaining 82.3% of its initial capacity after 500 cycles at 1C, compared to 65.4% for the undoped counterpart. Furthermore, the co-doped material demonstrates enhanced rate capability, delivering 112 mAh/g at 5C, and suppressed phase transitions, as evidenced by in-situ X-ray diffraction. This work provides a rational design pathway for high-performance P2-type cathodes, addressing key bottlenecks in SIB commercialization.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3491-6
Binary alloys have garnered significant attention for sodium-ion battery anodes due to their ability to combine the advantages of single-phase alloys. However, these materials often demonstrate limited electrochemical performance, and the relationship between their crystallization states and sodium storage properties remains poorly understood. Here, Bi-Sn binary alloys with various compositions were synthesized via phase-separation metallurgy to explore the sodium storage properties of different crystalline structures. The results indicate that hypo- and hyper-eutectic Bi-Sn alloys readily form a dendritic primary phase at the non-eutectic interface, which aggravates structural degradation and increases internal resistance. In contrast, Bi-Sn alloys with optimized eutectic interfaces effectively control dendritic growth and reduce defects, resulting in enhanced microstructural stability and superior electrochemical performance. The eutectic p-Bi57Sn43@C anode achieves a record-high specific capacity of 470.3 mAh g−1 at 1 C and exhibits remarkable long-term cycling stability, retaining 95.2% of its capacity after 1000 cycles at 20 C. The defect-free eutectic concept presented here establishes a valuable foundation for future studies of binary and polycrystalline eutectic alloys in electrochemical applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3499-6
Biomass-derived hard carbons (HCs) are promising anodes for sodium-ion batteries (SIBs) due to their low cost, renewable nature, and structural stability, yet their practical application is hindered by a low initial Coulombic efficiency (ICE) and inadequate rate capability. Herein, we report a tri-functional nitric acid treatment coupled with one-step carbonization to synthesize a hard carbon with a sp2-C-dominated structure. The process not only eliminates impurities but also selectively dissolves lignin in the biomass, thereby promoting the alignment of graphite microcrystals. At the same time, edge-N and C=O groups are grafted onto the carbon skeleton, which together produce an HC with an optimized interlayer spacing and abundant closed micropores. These structure modifications collectively increase Na+ adsorption kinetics in the sloping region and enable efficient sodium storage in the low-voltage plateau region, yielding a high ICE of 91.69% and a remarkable rate capability, with 83.9% capacity retention at 600 mA g−1. A full SIB cell using this HC anode with a Na3V2(PO4)3 cathode delivers an energy density of 213.14 Wh kg−1, demonstrating its practical potential. This work offers a simple and scalable engineering strategy to overcome the performance vs. manufacturing cost dilemma in developing HC anodes.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3494-2
Dense dual-phase Si3N4 ceramics combining high hardness and toughness were synthesized via high-pressure spark plasma sintering (SPS) at 1500–1560 °C. Using only 5 wt% liquid-phase additives, full densification was achieved at 150 and 200 MPa, whereas 50 MPa SPS at 1600 °C failed. The 200 MPa specimen exhibited stress-induced α→β phase transformation via coherent interface migration, yielding elongated β-columnar grains with embedded α particles. At 1560 °C and 200 MPa, the material achieved a hardness of 21.3±0.3 GPa and fracture toughness of 6.3±0.3 MPa·m1/2, surpassing the 150 MPa baseline which underwent grain coarsening and reduced toughness. The mechanism overcomes the thermodynamic disparity between α and β phases, enabling uniform microstructures with equiaxed and elongated grains. This pressure-regulated approach offers a scalable route for advanced structural ceramics in extreme environments.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3732-2
The exploration and utilization of marine resources demand advanced operational tools. At present, deep-sea vehicles equipped with manipulators serve as the primary platforms for underwater exploration. However, the pressure sensors responsible for detecting the subtle gripping forces of these manipulators still face significant technical challenges, primarily due to the extreme hydrostatic pressure, corrosive seawater environment, and stringent mechanical strength requirements. A dual-curing, waterproof digital light processing (DLP) resin has been developed to achieve micron-scale printing accuracy, excellent seawater resistance, and mechanical properties comparable to those of thermoplastic resins. More importantly, the deep-sea pressure sensor (DSPS) features a unique printed lattice structure that allows seawater to penetrate and equilibrate the internal and external pressures, effectively mitigating the effects of deep-sea hydrostatic pressure. Experimental results demonstrate that the sensor exhibits a wide detection range and high sensitivity, with a measured sensitivity of 0.77 kPa−1 under 30 MPa hydrostatic pressure and a signal fluctuation below 1.48%. Furthermore, both the sensitivity and detection range of the sensor can be tuned by adjusting the lattice parameters, providing a robust foundation for the advancement of marine resource exploration.