SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4267-y
The synthesis of two-dimensional MBenes from MAB-phase ceramics is impeded by uncontrolled etching kinetics that compromise structural integrity and yield. This study introduces a vacuum molten salt strategy to regulate space-charge accumulation during the selective removal of Al from Mo2AlB2, producing honeycomb-like architectures. The vacuum environment suppresses oxidative side reactions and modulates ionic transport, enabling precise control over etching depth and morphology. The resulting Mo2AlB2 exhibits exceptional electromagnetic wave absorption, with a minimum reflection loss of -56.3 dB at 2.4 mm and an effective absorption bandwidth of 6.8 GHz. These metrics surpass conventional etching-derived MBenes by a factor of 2.5 in attenuation capacity. The space-charge-regulated mechanism is elucidated through in situ spectroscopic and computational analyses, revealing that vacancy-induced charge redistribution governs the etching front propagation. This work establishes a scalable route for high-purity MBenes with tailored porosity, addressing critical bottlenecks in energy absorption and catalytic applications. The vacuum molten salt approach eliminates the need for hazardous HF, offering a safer and more environmentally benign pathway for industrial translation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4432-9
Sodium vanadium phosphate (Na3V2(PO4)3, NVP) with NASICON structure is a promising cathode for sodium-ion batteries but suffers from low electronic conductivity and a high energy barrier for the V4+/V5+ redox couple, limiting practical energy density. A medium-entropy tuning strategy yields the multi-element substituted Na3.2V1.5Cr0.1Fe0.1Mn0.1Ni0.1Ti0.1(PO4)3 (ME-NVP). Entropy modulation tailors the microscopic electronic structure, enabling reversible V4+/V5+ redox at 4.0 V. Analyses reveal a synergistic diffusion mechanism that accelerates Na+ transport and enhances multiple-electron redox kinetics. Ex-situ X-ray diffraction confirms highly reversible structural evolution during cycling. The ME-NVP cathode delivers 116.8 mAh g-1 at 0.1C and retains 83.9% of initial capacity after 1000 cycles at 20C, with excellent performance from -12 to 50 °C. This work demonstrates that configurational entropy regulation unlocks high-energy polyanion cathodes for advanced sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4339-7
Neuromorphic computing demands energy-efficient synaptic devices that emulate biological plasticity. Optoelectronic memristors based on colloidal quantum dots (QDs) offer tunable bandgaps and solution processability, yet suffer from defect-mediated nonradiative recombination and instability. Here, we report ZnS-passivated CdZnSe core/shell QDs as the active layer in memristive devices, achieving enhanced synaptic emulation and information encryption. Time-resolved photoluminescence (TRPL) decay curves were fitted with a tri-exponential function, revealing that ZnS passivation suppresses defect-related trap states, prolonging the average carrier lifetime from 12.3 ns (CdZnSe) to 28.7 ns (CdZnSe/ZnS). The intensity proportion of the fast decay component (τ1 ≈ 1.2 ns) decreased from 45% to 18%, indicating reduced surface trapping. Devices incorporating CdZnSe/ZnS QDs exhibit stable bipolar resistive switching with an ON/OFF ratio exceeding 10^3, endurance of >10^3 cycles, and retention of >10^4 s. Under 365 nm UV illumination, the devices show light-tunable synaptic plasticity, including paired-pulse facilitation (PPF) with a facilitation index of 180% at a 50 ms interval, and transition from short-term to long-term memory. The memristors successfully emulate essential synaptic functions and are employed in a simple encryption scheme, demonstrating the potential of defect-passivated QDs for secure neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4315-2
High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4317-4
This correction addresses an image assembly error identified in Fig. 7a of the original article published in Science China Materials, volume 66, issue 6, 2023, pages 2513–2522. The error was confined to the assembly of images in Fig. 7a, which presents H&E staining analysis of major organs from a toxicity study. The corrected version of Fig. 7 is provided in this corrigendum. The original study evaluated the toxicity of lyophilized cabazitaxel (CTX) and Tween 80-based CTX formulations in CD-1 mice following a single intravenous administration of 30 mg kg−1 CTX via the tail vein on day 0, with sacrifice on day 14 for analysis (n=5). The figure includes H&E staining of major organs, complete blood count (CBC) analysis with statistical significance indicated by *p < 0.05, and mouse weight measurements. The correction does not affect the overall results, data interpretation, or scientific conclusions of the original article. All authors have reviewed and approved the content of this corrigendum. The authors sincerely apologize for any inconvenience caused to the editorial office, reviewers, and readers. The article was received on 6 May 2026, accepted on 4 June 2026, and published online on 31 July 2026.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4200-0
Self-powered broadband photodetectors are pivotal for next-generation intelligent healthcare. Solution-processed mercury sulfide (HgS) is an attractive near-infrared absorber but is limited by interfacial instability, high defects, and sluggish response. Inspired by sulfur-mediated adhesion in Alhagi sparsifolia, a bioinspired interfacial engineering strategy employs an antimony sulfide (Sb2S3) interlayer to construct a bidirectional chemical bonding network. The Sb2S3 interlayer simultaneously forms Sb–O bonds with fluorine-doped tin oxide (FTO) substrates and Sb–S/Hg–S bonds with the HgS layer, thereby reinforcing interfacial adhesion, passivating coordination-unsaturated defect states, and establishing a type-II heterojunction with a strong built-in electric field. The resulting Sb2S3/HgS photodetector exhibits self-powered operation, broadband sensitivity spanning the visible to near-infrared region (642–1550 nm), an ultrafast response time of 2.47 ms, a detectivity up to 1.7 × 10^11 Jones, and retaining nearly constant photocurrent over 5000 continuous on-off switching cycles as well as prolonged air exposure. Beyond device-level performance, we demonstrate its utility in intelligent healthcare scenarios, including machine-learning-assisted liquid drug identification, binary-coded optical wireless communication, and high-fidelity photoplethysmography monitoring. This work establishes biomimetic bidirectional bonding as a generalizable paradigm for stabilizing solution-processed chalcogenide optoelectronics and accelerates the integration of self-powered broadband photodetectors into intelligent healthcare systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4322-4
Ultrafast scintillators with low-nanosecond emission are essential for next-generation high-rate X-ray and particle imaging. Although Ce3+-activated scintillators inherently exhibit fast response characteristics, conventional Ce3+-doped hosts rarely achieve low-nanosecond ultrafast decay. Here, we report a high-entropy fluoride scintillator (HEFS), Ce:LaGdCaSrBaF12 (Ce:LGCSB), in the form of bulk single crystals. The severe lattice distortion arising from multi-cation disorder induces exciton localization and effectively suppresses exciton diffusion. Through the rapid relaxation of localized excitons, the high-entropy Ce:LGCSB single crystals deliver a decay time of 1.23 ns with a 94.6% fast-component contribution and without any noticeable slow component. Through first-principles calculations, spectroscopic characterization, and transient dynamics analysis, we reveal that the ultrafast response originates from accelerated Frenkel exciton (FE) recombination enabled by the high-entropy environment. This work establishes entropy-engineered fluorides as promising ultrafast scintillator platforms and proposes a general strategy for extending sluggish diffusion effects to the excitonic scale, offering new opportunities for improving scintillation timing performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4463-3
Organic-inorganic hybrid lead halide perovskites exhibit exceptional photovoltaic properties, yet their low crystallization energy promotes defect generation and necessitates precise control over synthesis parameters, hindering scalable fabrication. Ambient large-area coating methods suffer from environmental disturbances, leading to nonuniform crystallization and mixed α/δ phases, resulting in module efficiencies below 20% compared to >27% for lab-scale spin-coated cells. This work introduces a phase-locking strategy using 3-ureidopropyltrimethoxysilane (TMPU) incorporated into the PbI2 precursor solution during two-step blade coating. TMPU undergoes simultaneous cross-linking and interaction with the perovskite intermediate, forming a dynamically evolving intergranular network that blocks moisture and reduces the energy barrier for α-FAPbI3 formation. This approach achieves spatiotemporally homogeneous crystallization, eliminating directional inhomogeneity. Under segmented and monolithic aging protocols, control devices exhibited severe position-dependent degradation with only 34% efficiency retention at early-coated positions after thermal cycling, whereas phase-locked films maintained over 84% of initial photoluminescence intensity across all regions. Encapsulated modules retained over 90% of initial efficiency after 1500 h of 85°C maximum power point tracking (ISOS-L-2) and after 2300 h under 85°C/85% RH damp-heat testing (ISOS-D-3). The TMPU-based strategy combines exceptional performance (21.5% module efficiency) with robust stability, offering a distinct advantage over alternative approaches. This work addresses the kinetic and spatial dimensions of upscaling, demonstrating that morphological uniformity is a fundamental contributor to stability, marking a critical advance toward practical deployment of perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3539-5
MXene-based layered films are promising for electromagnetic interference (EMI) shielding, yet achieving highly ordered structures in scalable production remains challenging. Here, we report a facile centrifugal casting method for fabricating MXene/polyvinyl alcohol (MXene/PVA) films with highly oriented and compact layered structures. During centrifugal casting, the viscous fluid experiences strong shear and centrifugal forces along tangential and normal directions, respectively, inducing compact and oriented arrangement of MXene nanosheets. Consequently, the Herman's orientation factor increases from 0.681 to 0.794 as rotation rate rises from 0 to 4000 r/min. Accordingly, tensile strength and toughness improve from 55.2 to 191.1 MPa and from ~0.8 to 2.5 MJ/m³, respectively. The highly oriented and compact layered structure with ultrathin thickness (~8 μm) enables a high absolute electromagnetic shielding effectiveness (SSE/t) of 21029 dB cm²/g. Moreover, increased orientation reduces infrared emissivity to 0.248, endowing the film with excellent thermal camouflage capability. This work presents an effective strategy for constructing high-performance MXene-based layered films.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3642-4
High-density glass scintillators are promising alternatives to crystals for next-generation radiation detection due to their low cost, excellent physical and chemical stability, and processability. In this study, a series of Ce3+-activated gadolinium gallium borosilicate (GGBS x) glasses were synthesized via vacuum melt-quenching. With increasing Gd2O3 content, glass density increased from 5.86 to 6.05 g/cm3, and molar volume from 36.43 to 39.79 cm3/mol. Extended X-ray absorption fine structure (EXAFS) analysis revealed that in GGBS 1 glass, Ce3+ exclusively adopts a hexahedral [CeO6] configuration, while Gd3+ exhibits both hexahedral and octahedral coordination with a bond length of 2.35±0.1 Å and Debye-Waller factor σ2 of 0.0122±0.0015 Å2. As Gd2O3 content increased, shallow trap depth rose from 0.804 to 0.858 eV, while deep trap depth first increased from 0.948 to 1.434 eV then decreased to 1.010 eV. GGBS 1 glass exhibited high transmittance (~80%) in the visible range and a photoluminescence quantum yield of 78.4%. Under X-ray irradiation, its X-ray excited luminescence intensity reached 128.5% of that of Bi4Ge3O12 (BGO) crystal, with a spatial resolution of 29.1 lp/mm, approaching the highest reported for glass scintillators. Under γ-ray excitation, it achieved a light yield of 1058 photons/MeV and an energy resolution of 23.7% at 662 keV. These results indicate that GGBS 1 glass scintillator warrants further development for applications in X-ray imaging and γ-ray spectroscopy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3714-3
Eco-friendly aqueous zinc batteries (AZBs) are promising alternatives to lead-acid batteries in applications requiring both safety and energy density. However, their practical deployment is hindered by the synergistic deterioration of zinc anodes—structural collapse and kinetic failure—under high depth of discharge (DOD) and high current densities, which severely limits actual energy and power densities. Here, we report a strategy for the in situ integration of a double-layer topological chitosan framework (D-CTS) on current collectors via regulating phase separation kinetics during multistage coordination-neutralization electrophoresis. The vertical through-hole array is formed by coupling instantaneous and delayed phase separation. Subsequently, a columnar zinc array is mediated by D-CTS to construct an integrated component (D-CTS-Zn) comprising a vertical through-hole separator and an array anode. The embedded interconnected nanonetworks within the through-hole walls enable dynamic equilibrium of the columnar zinc array through a lateral ion compensation mechanism. As a result, Zn||Zn symmetric cells with D-CTS-Zn stably cycle over 3000 cycles at 200 mA cm−2 under 60% DOD. The assembled D-CTS-Zn||MnO2 battery delivers an energy density of 83 Wh kg−1 at an ultrahigh power density of 9.25 kW kg−1. This work provides a constructive strategy for chitosan phase separation regulation and separator-induced reversible metal array anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3684-4
The efficient conversion of dinitrogen (N2) to ammonia (NH3) under mild conditions remains a critical challenge for sustainable nitrogen fixation. This study reports a rationally designed ternary heterojunction, GO/MXene/UiO-66 (GM/UiO-66), which achieves directed charge transfer for enhanced photocatalytic nitrogen fixation. The internal electric field at the heterointerface drives anisotropic migration of photogenerated charges, leading to rapid separation of electron–hole pairs and suppression of interfacial recombination. The intrinsic defect structure of graphene oxide (GO) provides active sites for N2 adsorption and activation, while π–π interactions between GO and UiO-66 accelerate electron transfer. Additionally, the Schottky junction between UiO-66 and MXene facilitates hole (h+) transfer. The incorporation of GO and MXene extends visible-light absorption of UiO-66. Under simulated solar illumination, GM/UiO-66 exhibits an NH3 generation rate of 25.1 μmol g−1 h−1, which is 1.9 times higher than that of pristine UiO-66 (13.5 μmol g−1 h−1). This work presents a novel strategy for designing ternary heterojunction composites that optimize charge transfer and significantly improve photocatalytic performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3722-3
Magnesium alloys are promising biodegradable bone implant materials due to their biocompatibility and mechanical compatibility, but rapid degradation and postoperative bacterial infection limit clinical application. Here, zeolitic imidazolate framework-8 (ZIF-8) and 3,4,9,10-perylenetetracarboxylic diimide (PD) composite coatings (ZIF-8@PD) were fabricated in situ on micro-arc oxidation (MAO) coated AZ31 alloys via two-step and one-step (OS) methods. The MAO/ZIF-8@PD and MAO/ZIF-8@PD (OS) coatings reduced corrosion current density by three and two orders of magnitude, respectively, compared to MAO coating, due to the physical barrier of the 2D-co-3D MOF structure. Under 808 nm near-infrared laser irradiation, photothermal and photodynamic effects from PD, combined with contact killing by released Zn2+ ions, achieved bactericidal rates ≥99.5% against E. coli and S. aureus. Photothermal conversion efficiencies were 44.01% and 48.57% for the two-step and one-step coatings, respectively. The distinct Zn2+ sources led to different 2D-co-3D MOF structures, influencing degradation and antibacterial behavior. These coatings offer a strategy to enhance corrosion resistance and antibacterial activity of Mg alloys for biomedical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3636-9
Metal halide perovskites have significantly improved solar cell performance due to their excellent optoelectronic properties. Recently, p-type small molecules such as Me-4PACz, assisted by dual-functional passivation, have enabled perovskite solar cells (PSCs) to achieve certified power conversion efficiencies (PCEs) up to 26.15%. However, issues such as molecular aggregation during solution processing limit the storage stability of precursor solutions and lead to poor molecular distribution within the film, hindering device efficiency and operational stability. Zhu's group enacted the co-deposition of a new p-type small molecule, D4PA, with perovskite. Density functional theory (DFT) investigations revealed that D4PA exhibits strong dual-terminal anchoring interactions with indium tin oxide (ITO) via two phosphonic acid groups, stabilized by intramolecular hydrogen bonding, ensuring robust adhesion and improved interface uniformity. Additionally, D4PA forms stable coordination with Pb2+ ions, suppressing defects and facilitating efficient charge transfer. Temperature-dependent Fourier-transform infrared (FTIR) spectroscopy confirmed strong binding between D4PA and perovskite, contrasting with the weaker binding of Me-4PACz. This stable interaction improves perovskite crystallinity and promotes uniform distribution of D4PA, resulting in superior photovoltaic performance. D4PA-based PSCs achieved a record PCE of 26.83% in small-area devices (certified 26.72%), and a mini-module (10.86 cm2) achieved a PCE of 23.37% with a certified MPPT efficiency of 22.66%. Devices retained 97.2% of initial efficiency after 2500 h of continuous operation at MPP under one-sun illumination. Reduced and homogeneous photoluminescence intensity indicated efficient and uniform hole extraction, and electroluminescence quantum efficiency (EQE-EL) reached 15.25%, significantly higher than 6.23% for Me-4PACz-based devices. This molecular engineering strategy provides a promising route for high-performance and high-durability inverted PSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3727-0
Lead halide perovskites are promising scintillators for X-ray imaging due to high X-ray absorption efficiency, excellent luminescence, and facile synthesis. However, their ionic nature challenges simultaneous high photoluminescence efficiency and environmental robustness. This work introduces a multilevel encapsulation strategy: CsPbBr3 quantum dots (QDs) are sequentially coated with Cs4PbBr6, SiO2, and polydimethylsiloxane (PDMS). Cs4PbBr6 passivates surface defects, while SiO2 and PDMS provide barriers against moisture, heat, and radiation. The resulting CsPbBr3@Cs4PbBr6/SiO2/PDMS flexible films exhibit a photoluminescence quantum yield (PLQY) of 85%, outstanding mechanical flexibility, and durability under stretching, bending, and compressing. Films retain emission stability under elevated temperatures, prolonged X-ray irradiation, and extended water immersion. X-ray imaging demonstrates spatial resolution of 12 lp/mm, enabling distortion-free imaging of curved objects; superior water resistance allows long-term underwater imaging. This work highlights hierarchical encapsulation in balancing luminescence efficiency and stability, offering a pathway toward practical flexible perovskite scintillators.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3838-5
Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics, including breathable wearables, on-skin devices, and bio-integrated electronics. However, conventional metallization strategies, such as sputtering and ink-printing, often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks, leading to device short-circuiting, operational failure, and limited vertical integration. Here, we present a solvent-selective dissolution-assisted transfer printing strategy to achieve surface-confined metallization of ultrathin, lightweight, and gas-permeable nanofibrous networks, enabling lateral conductivity while maintaining vertical insulation. This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding. Meanwhile, the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity (2 Ω cm) and vertical insulativity (10^11 Ω cm). The resulting anisotropic conductive networks enable low-voltage wearable heaters, high-sensitive pressure sensors, and ultralight temperature sensors. A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification. The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable, ultrathin, and lightweight wearable electronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506020
The rotary kiln roasting of lepidolite for lithium extraction faces challenges of unstable lithium conversion rates and high energy consumption. To address this, a multi-objective optimization method coupling improved neural network simulation with a multi-objective genetic algorithm was proposed, targeting the synergistic optimization of lithium conversion rate (TRLi) and natural gas consumption intensity (EIng). Using long-term industrial time-series data of batching parameters and kiln operating variables, back-propagation (BP) neural network and its particle swarm optimization (PSO) improved variant were developed to model TRLi and EIng. The PSO-BP model demonstrated superior accuracy in capturing the complex nonlinear relationships, reducing mean absolute percentage errors (MAPE) to 0.278 and 0.284 for TRLi and EIng, respectively. Subsequently, the non-dominated sorting genetic algorithm II (NSGA-II) was employed to construct a multi-objective optimization model, yielding a Pareto-optimal set of process parameters that maximize TRLi and minimize EIng. The results revealed that under NSGA-II optimized conditions, TRLi could be stabilized between 82.45% and 87.96%, an average increase of 3.61 percentage points over baseline operations, while EIng could be reduced to 53.7 m3 per ton of clinker. For an annual processing capacity of 3.2×105 tons of lepidolite concentrate and sulfate mixture, this corresponds to an additional 127.1 tons of lithium metal recovery, a reduction of 1,964,912 m3 in natural gas consumption, and a decrease of 3,763.84 tons in CO2 emissions annually. This study provides theoretical and technical support for the green, high-quality, and low-carbon supply of critical raw materials for the lithium battery new energy industry.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0026
The catalytic hydrogenation of carbon dioxide (CO2) to light olefins (C2–C4) represents a pivotal route for mitigating greenhouse gas emissions while producing high-value chemical feedstocks. This review systematically examines the two principal technological pathways: CO2-Fischer-Tropsch synthesis (CO2-FTO) and CO2-methanol-to-olefins (CO2-MTO). The CO2-FTO route couples reverse water-gas shift (RWGS) with Fischer-Tropsch synthesis, whereas CO2-MTO proceeds via methanol intermediate. Key challenges arise from the thermodynamic stability of CO2 (C=O bond dissociation energy ~750 kJ/mol) and kinetic limitations. The review critically evaluates the influence of catalyst promoters (e.g., Na, Mn, Cu), support structures, and surface defect site concentrations on CO2 activation and olefin selectivity. For zeolite-based catalysts, pore architecture and acidity are shown to govern methanol conversion to olefins. Representative data from the literature indicate that Fe-based catalysts with Na promotion achieve CO2 conversion up to 40% with olefin selectivity exceeding 50% under optimized conditions. The review underscores the necessity of integrating catalyst design with reactor engineering to overcome thermodynamic constraints and achieve industrially viable performance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112806
Microplastics (MPs) are persistent emerging contaminants ubiquitously distributed in soil-groundwater environments, where their aggregation and transport critically govern pollutant fate and ecological risks. Natural organic matter (NOM), a complex assemblage of organic compounds, interacts with MPs and porous media via hydrogen bonding, π-π interactions, hydrophobic effects, and electrostatic binding, thereby modulating MP surface properties and environmental behavior. This review systematically synthesizes the mechanisms by which NOM influences MP aggregation and transport, with emphasis on the distinct roles of humic substances, proteins, and extracellular polymeric substances (EPS), and their synergistic modulation with solution chemistry (pH, ionic strength, ion type). Additionally, NOM accelerates MP aging and alters surface characteristics, consequently impacting transport capacity. Current research limitations are identified, and future directions are proposed to inform MP pollution risk assessment and management strategies. Key findings indicate that NOM generally enhances MP stability and mobility at low ionic strengths, while high ionic strengths may induce aggregation depending on NOM type and ion valence. Humic substances predominantly increase electrostatic repulsion, whereas proteins and EPS can bridge particles, promoting aggregation. Aging processes, accelerated by NOM photochemical activity, increase surface oxygen functionality and hydrophilicity, further altering transport. The review underscores the need for systematic studies under environmentally relevant conditions to predict MP fate accurately.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604013
Reclaimed water serves as an alternative water source for replenishing natural water bodies, yet residual pollutants pose ecological risks. A pilot-scale hybrid vertical flow constructed wetland filled with manganese ore sand, quartz sand, and cobblestones was operated for approximately 140 days to assess nutrient and organic matter removal, ecotoxicity, and the suitability of manganese sand as a functional medium. Influent concentrations were up to 0.4 mg/L ammonia, 0.2 mg/L phosphate, 8 mg/L nitrate, and 30 mg/L COD. After 2–3 months of operation, ammonia and phosphate removal efficiencies exceeded 90% and 80%, respectively. Average reductions for nitrate and COD were 0.67 mg/L and 4.2 mg/L. Manganese sand enhanced organic decomposition, reducing maximum 3D fluorescence intensity by 26%, humic substances by 48%, UV254 by 38%, and achieving 70.8% removal of four target antibiotics. Purified water exhibited no significant genotoxicity, with micronucleus rates approaching tap water levels, and non-concentrated samples showed no acute biotoxicity. However, concentrated samples displayed acute toxicity, suggesting different causative pollutants for genotoxicity and acute toxicity. The study supports manganese sand as an effective medium for improving reclaimed water quality and controlling ecological risks.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61094-3
Aqueous zinc-iodine (Zn-I2) batteries are promising for large-scale energy storage due to their intrinsic safety, low cost, and high theoretical capacity (211 mAh g−1 for iodine). However, their practical application is hindered by the poor electronic conductivity of iodine, sluggish redox kinetics, and the shuttle effect of polyiodides. This review systematically analyzes the reaction mechanisms of iodine cathodes, including two-electron (I−/I2) and multi-electron (I−/I2/I+ and I−/I2/I+/IO3−) pathways, and identifies key bottlenecks. It then comprehensively summarizes recent advances in iodine host materials, categorized into three strategies: physical confinement, chemical adsorption, and electrocatalysis. Representative host materials such as porous carbons, covalent organic frameworks (COFs), porous aromatic frameworks (PAFs), polymers, MXenes, and Prussian blue analogs (PBAs) are discussed, with emphasis on the structure–performance relationships. The review highlights that heteroatom doping (e.g., nitrogen) enhances chemical adsorption of iodine species, while single-atom catalysts (e.g., Co, Zn) provide electrocatalytic sites that accelerate conversion kinetics. Finally, future research directions are proposed, including exploration of multi-electron systems, mechanistic elucidation of iodine conversion, development of advanced host materials, and optimization of zinc anodes, to accelerate the commercialization of Zn-I2 batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3633-5
High-temperature interfacial diffusion in Half-Heusler (HH) thermoelectric devices poses significant challenges for practical applications, particularly the diffusion of Ag from conventional solders, which degrades material performance and device stability. This study reveals anomalous Ag diffusion through a Cr powder barrier layer into Ti0.5Zr0.5NiSn0.98Sb0.02, driven by Sn phase penetration. In contrast, employing a Cr foil barrier layer pre-densified the material, effectively preventing Sn phase penetration and eliminating Ag diffusion pathways, thereby preserving junction integrity. After aging at 973 K for 30 days, the Cr foil junction maintained a clean interface with a low contact resistivity of 0.27 μΩ cm2. Benefiting from this interfacial design, a Hf-free HH module achieved a high conversion efficiency of 10.4% at a hot-side temperature of 976 K, alongside long-term stability. This work addresses critical bottlenecks in developing high-performance, low-cost HH modules, facilitating their commercial application in waste heat recovery.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60619-0
Under the context of global energy transition and carbon neutrality, controlling nitrogen oxide (NOx) emissions from biomass combustion is of great significance, and the development of high-efficiency low-temperature catalysts has become a current research focus. In this study, Nb was used to dope and modify the Mn7-Cu3/BCN catalyst to construct the Mn7-Cu3-Nbx/BCN system. The doping amount was optimized through selective catalytic reduction (SCR) activity tests. The reaction mechanism was explored by combining in situ DRIFTS and density functional theory (DFT) simulations. Experimental findings revealed that the catalyst doped with 0.05% Nb achieved the optimal performance, sustaining a NO conversion efficiency of ≥94% within the temperature window of 150−275 °C while demonstrating improved resistance to alkali metal K poisoning. Mechanistic analyses showed that at low temperatures, the catalyst facilitated the SCR reaction via both the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) pathways, with the synergistic interaction between multiple active sites driving the efficient conversion of NH3 and NO. DFT calculations further confirmed that both pathways had the characteristics of low reaction energy barriers and significant exothermicity, ensuring the high activity and feasibility of the low-temperature reaction. The findings provided foundational theoretical support for the design of Nb-doped Mn-Cu-supported catalysts and the exploration of the underlying working mechanisms.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010608
This study investigated the occurrence and distribution of 27 per- and polyfluoroalkyl substances (PFAS) in surface water and sediment of the Fuchun River, a tributary of the Qiantang River Basin. Surface water samples were analyzed using ultra-performance liquid chromatography coupled with high-resolution mass spectrometry. Total PFAS concentrations (∑PFAS) in surface water ranged from 30.04 to 105.26 ng/L, with mean and median values of 59.64 ng/L and 51.43 ng/L, respectively. The dominant compounds were perfluorooctanoic acid (PFOA), hexafluoropropylene oxide dimer acid (GenX), and perfluorobutanoic acid (PFBA). Concentrations generally decreased from upstream to downstream, consistent with previous studies. Notably, GenX levels were significantly elevated compared to earlier reports. In sediment, ∑PFAS concentrations ranged from not detected (ND) to 0.59 ng/g dry weight, with mean and median values of 0.14 ng/g and 0.11 ng/g, respectively. PFOA and perfluorooctanesulfonic acid (PFOS) were the primary sediment contaminants. Source apportionment indicated that industrial wastewater discharge and sewage treatment plant effluents were the main sources of PFAS in the river. Risk assessment using risk quotients suggested low ecological risks to aquatic organisms for most detected PFAS. However, the presence of short-chain and novel PFAS warrants further investigation due to potential unknown risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012302
Phosphorus (P) loss from paddy fields contributes to eutrophication in Chaohu Lake. This study evaluated the effects of novel fertilizers and P reduction on P loss and rice yield. Seven treatments were established: no P (CK), rice-specific fertilizer (ZYF), slow-release blended fertilizer (SRF), Xinjutian compound fertilizer (XJT), enhanced loss-controlled fertilizer (CRF), CRF with 10% P reduction (CRF-10P%), and CRF with 30% P reduction (CRF-30P%). Results showed that novel fertilizers and P reduction significantly reduced concentrations of total phosphorus (TP), dissolved phosphorus (DP), and particulate phosphorus (PP) in surface water and leachate. The first 5 days after basal fertilization and heavy rainfall were high-risk periods for P loss. Rainfall increased TP concentrations by 417.74%–432.86% and 94.85%–351.35% in surface water and leachate, respectively; DP increased by 120.80%–322.44%, and PP by 280.66%–501.77% and 80.23%–297.55%. Compared with ZYF, SRF, XJT, and CRF reduced TP loss by 15.43%–33.95%, with SRF showing the lowest loss. Under P reduction, CRF-10P% and CRF-30P% reduced TP loss by 31.48% and 37.04%, respectively, with CRF-30P% achieving the lowest loss. Notably, CRF-10P% increased rice yield by 22.37% relative to ZYF, indicating that moderate P reduction with enhanced loss-controlled fertilizer can maintain or increase yield while reducing environmental risk. The study concludes that CRF-10P% offers a promising strategy for sustainable rice production in the Chaohu Lake watershed.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010607
This study investigated the occurrence, sources, and ecological risks of polycyclic aromatic hydrocarbons (PAHs) in soil, litter, and bark samples collected from the forest-grassland transition zone of Inner Mongolia. A total of 12 PAHs were detected in soil, with concentrations ranging from 34.9 to 465.3 ng·g⁻¹ (mean 168.8 ng·g⁻¹), predominantly 3–5 ring compounds. Litter contained 14 PAHs at concentrations between 106.4 and 2262.5 ng·g⁻¹ (mean 465.1 ng·g⁻¹), dominated by 3- and 4-ring PAHs. Both living and dead bark exhibited 14 PAHs, with concentration ranges of 119.2–240.0 ng·g⁻¹ and 123.3–241.6 ng·g⁻¹, respectively, mainly composed of 4-ring PAHs. Spearman correlation analysis revealed no significant correlations among PAH concentrations across the three media (P > 0.05). Source apportionment using diagnostic ratios and principal component analysis indicated that soil PAHs primarily originated from biomass, coal, and gasoline combustion; litter PAHs from petroleum volatilization and coal/natural gas combustion; and bark PAHs from petroleum volatilization and fossil fuel combustion, with high-molecular-weight PAHs dominating. Ecological risk assessment using the risk quotient (RQ) method showed that soil PAHs posed low overall ecological risk, though certain individual PAHs exhibited higher risk. The toxic equivalent (TEQ) method indicated that dead bark was the primary accumulation medium with high carcinogenic contribution, posing elevated ecological risk. Although litter and living bark had lower PAH concentrations, their long-term accumulation effects warrant attention. These findings provide crucial scientific evidence for understanding the environmental behavior and potential risks of PAHs in cold, high-latitude regions of northern China.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3834-x
Lithium metal anodes face critical barriers to practical application due to dendritic growth and interfacial instability, which cause short cycle life and safety hazards. This work introduces a highly stable and ultrahigh-rate lithium metal anode using a lithiophilic Sm2S3-modified carbonaceous host. The in situ formation of a Li2S-reinforced interphase layer enables highly reversible lithium plating/stripping and uniform deposition. The modified anode achieves an ultrahigh rate capability of 20 mA cm−2 and ultralong cycling stability of 7440 cycles with dendrite-free morphology. In a 4.5 V anode-less Li||LiCoO2 cell with an areal capacity of ~1.93 mA h cm−2, the system sustains over 1100 cycles with 87.2% capacity retention under harsh conditions: an ultralow negative-to-positive capacity ratio (N/P) of ~0.26 and lean electrolyte of ~5 g Ah−1. Furthermore, an anode-less pouch cell with an ultrahigh areal capacity of ~6.01 mA h cm−2 delivers superior cycling performance even at an ultra-low N/P ratio of ~0.71 and ultra-lean electrolyte of ~1 g Ah−1, achieving a high energy density of 505 Wh kg−1. This work provides a scalable and effective strategy for advancing reliable, practical lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3833-1
Developing plasmonic nanomaterials with compositions beyond noble metals is crucial for expanding their applications. Transition metal nitrides, such as titanium nitride (TiN), exhibit excellent plasmonic optical properties and photothermal conversion efficiency, showing promise in catalysis, photothermal therapy, and seawater desalination. However, the structure-property relationship governing their plasmonic optical properties remains unclear. Here, we constructed Au@TiN core-shell nanostructures and systematically investigated the tunability of their geometry, composition, and optical properties. By varying the Au core size and TiN shell thickness, we achieved precise control over the localized surface plasmon resonance (LSPR) from visible to near-infrared wavelengths. Single-particle scattering spectroscopy revealed distinct plasmon hybridization modes, with experimental spectra matching theoretical simulations. The Au@TiN nanostructures exhibited enhanced photothermal conversion efficiency (η = 78.5%) under 808 nm laser irradiation, significantly outperforming pure TiN nanoparticles (η = 45.2%). This work demonstrates multi-factor control over plasmonic effects in TiN, providing insights for designing TiN-based plasmonic nanomaterials for catalysis and sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3817-3
The rapid development of artificial intelligence (AI) and big data-driven edge intelligence applications has created an urgent demand for highly efficient computing hardware. Ferroelectric memristors have emerged as promising candidates for edge hardware due to their multi-level conductance tunability and high integration potential. In this work, we fabricated yttrium-doped hafnium oxide (YHO) memristors with a remanent polarization of ~30 μC/cm2, a multi-level resistive state retention time of approximately 10^5 s, and an endurance of up to 10^9 cycles. Based on this device, we constructed a real-time path-tracking system for intelligent vehicles—which achieves 100% path recognition accuracy—and a traffic sign denoising network optimized for hardware mapping via a hierarchical mixed-precision quantization strategy; this network yields denoised images with a peak signal-to-noise ratio (PSNR) of 27.04 and a structural similarity index measure (SSIM) of 0.80. This work paves an innovative pathway for the practical application of hafnium-based ferroelectric memristors, accelerating the development of highly efficient hardware for edge intelligence.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509078
The rapid expansion of photovoltaic (PV) installations and the impending retirement of early-stage modules have made the recycling of end-of-life PV modules an urgent issue. This review systematically examines the types and structures of retired PV modules, with a focus on crystalline silicon (c-Si) and thin-film technologies. It critically evaluates the principles, processes, and pros and cons of physical, chemical, pyrolysis, biological, combined, and emerging methods for recovering c-Si modules. The current status of silicon, metal, and valuable component recovery processes is summarized. For thin-film modules, the core technologies for recovering valuable components via pyrometallurgical, hydrometallurgical, biological, and novel approaches are analyzed in depth. Results indicate that conventional methods (physical, chemical, pyrolysis) remain dominant but suffer from high energy consumption, pollution, and chemical usage. Emerging technologies such as biological and green leaching are identified as key research directions, though they face challenges of low technical maturity and high costs. Finally, policy orientations and existing challenges are discussed, and future development directions are proposed, providing significant guidance for the sustainable and large-scale green development of the PV industry.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60636-6
Polyoxymethylene dimethyl ethers (DMMx) are promising clean diesel additives. Compared to the traditional aldol condensation route, the one-step oxidative method for producing DMMx directly from methanol is a green synthesis route offering significant advantages. However, due to the complexity of the reaction, a balance must be struck between oxidation depth and C–O chain growth efficiency. This imposes specific requirements on the design of catalysts with multifunctional active sites: the catalyst should possess appropriate oxidative activity, suitable acid strength distribution, and effective synergy between these two functions. To address these challenges, this study designed a sulfuric acid-modified molybdenum-doped NASICON catalyst, which demonstrated favorable catalytic performance in the one-step oxidative synthesis of DMMx from methanol. Over the NSC-Mo-0.5-30% catalyst, methanol conversion rate of 81.3% and the DMMx selectivity of 58.7% were achieved, along with the formation of heavier molecules, as evidenced by the DMM2–6 selectivity of 11.3%. The NH3-TPD, Py-IR and XPS results indicate that the introduction of molybdenum increases the number of weak Lewis acid sites, while sulfuric acid impregnation not only generates gradient-distributed Brønsted acid sites but also promotes the formation of Mo5+/Mo6+ redox pairs. The cooperation of the two types of active sites significantly enhances catalyst performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3820-5
Two novel N-heterocyclic carbene (NHC)-based ligands featuring rigid boron-oxygen (BO) fused-ring units, named Bpmi and Bpmb, and the two corresponding homoleptic meridianal iridium complexes, namely mer-Ir(Bpmi)3 and mer-Ir(Bpmb)3, were designed and synthesized. Single-crystal structures revealed a meridional coordination geometry for both complexes. Shorter Ir–C carbene bond lengths and rigid planar BO-fused ring units contribute to enhanced stability. Both complexes exhibit efficient green phosphorescence (λem = 536/521 nm in toluene, ΦPL > 78%) with short lifetimes (τ = 846/1083 ns), leading to high radiative rate constants (Kr = 10.04 × 10^5 and 7.29 × 10^5 s−1, respectively). Theoretical calculations indicate significantly increased metal-to-ligand charge transfer (MLCT) character (21.69% for mer-Ir(Bpmi)3; 17.30% for mer-Ir(Bpmb)3) compared to reference complexes (13.01% for mer-Ir(pmi)3; 15.99% for mer-Ir(pmb)3). Both complexes exhibit exceptional thermal stability with decomposition temperatures of 491°C (mer-Ir(Bpmi)3) and 540°C (mer-Ir(Bpmb)3). OLED devices using mer-Ir(Bpmb)3 and mer-Ir(Bpmi)3 as emitters demonstrate maximum external quantum efficiencies of 20.0% and 15.6%, respectively. This research pioneers boron-fused ring-containing NHCs and their phosphorescent iridium(III) complexes, establishing a novel design strategy for high-performance NHC-based OLED phosphorescent emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3942-2
Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3840-3
Tactile sensing for dexterous robotic hands is essential for achieving human-like precision in manipulation. However, current tactile sensors face challenges such as insufficient durability, limited coverage, and poor conformability to curved, jointed surfaces. This study presents a stretchable distributed tactile sensor array designed for dexterous robotic hands. The array comprises 18 sensing units distributed across the hand, incorporating quasi-homogeneous functional layers interconnected by crosslinked interpenetrating networks, and composite electrodes combining high conductivity with stretchability. This design yields a thin, soft, transparent, and stretchable sensor array that integrates seamlessly with a commercial dexterous hand. The sensor array exhibits high interlayer tensile strength, high sensitivity, low hysteresis, and excellent long-term reliability over 10,000 loading cycles. Experimental results demonstrate accurate detection of tactile force across the entire robotic hand during object grasping. Using convolutional neural network algorithms, the sensor array identifies different object types with 90.1% accuracy, with results displayed in real time on a digital twin interface. The proposed sensor array holds significant potential for embodied intelligence and robotics in adaptive grasping, safe manipulation, and remote teleoperation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509004
Acetone, a widely used solvent in the pharmaceutical industry, poses environmental and economic challenges due to its high volatility and the low concentration of acetone in water-based absorbents, which complicates recovery. This study proposes a composite absorbent comprising 1,4-butanediol (BDO), triethylene glycol, sodium citrate, and water, aiming to enhance acetone absorption capacity and enable cost-effective resource recovery. Response surface methodology optimized the absorbent composition to BDO 35%, triethylene glycol 10%, and sodium citrate 5%, achieving an acetone absorption capacity of 51.97 g·kg−1, which is 2.39 times that of pure water (21.77 g·kg−1). Density functional theory (DFT) calculations and AIM topological analysis revealed that BDO forms stronger hydrogen bonds with acetone, characterized by shorter bond lengths and higher electron density, underpinning its superior molecular recognition and absorption capability. Process simulation of absorption-regeneration cycles demonstrated that, compared to pure water, the composite absorbent reduces absorbent consumption by 36.2% and regeneration energy consumption by 41.15% while achieving effluent acetone concentrations below 100 mg·m−3. This multi-scale investigation, spanning macroscopic experiments, molecular mechanisms, and process simulation, validates the feasibility and advantages of BDO-based composite absorbents for VOC control, providing theoretical and data support for the engineering application of alcohol-based absorbents in efficient organic pollutant separation.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60653-6
Carbon deposition caused by mass transfer limitations is a key challenge for traditional microporous ZSM-5 zeolites in coal tar catalytic cracking. To address this, benzene was used as a model compound. Parent ZSM-5 (NL-ZSM-5) was modified with tetraethylammonium hydroxide (TEAOH) to prepare hierarchical ZSM-5 zeolites with different mesopore sizes. Characterization (XRD, FT-IR, BET, TEM) confirmed successful mesopore introduction via selective desilication while retaining the MFI structure. At TEAOH concentration of 0.4 mol/L (ZSM-5-C), total pore volume increased from 0.24 to 0.43 cm3/g, and Brønsted acid amount increased from 0.28 to 0.67 mmol/g, with improved acid site accessibility. Catalytic experiments and carbon deposition analysis showed that hierarchical pore structure inhibits coking via a synergistic effect of diffusion enhancement and adsorption-site regulation. The coke amount of ZSM-5-C was 4.0%, only one-third of that of NL-ZSM-5 (11.9%). Molecular dynamics simulations confirmed that the diffusion coefficient of benzene in a 3.0 nm mesopore model is an order of magnitude higher than in a 2.0 nm model. Adsorption capacity decreases with increasing mesopore size, shortening residence time. Increasing temperature enhances diffusion but exponentially intensifies surface condensation reactions (Arrhenius effect), which dominates coke formation; hierarchical pores mitigate this negative effect. This research provides a theoretical basis for designing high-efficiency, coke-resistant catalysts for coal tar conversion.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040202
Halophenols are highly toxic disinfection byproducts and common taste-and-odor pollutants in drinking water. In this study, a palladium catalyst confined within the pores of UiO-66 (Pd@UiO-66) was prepared via a double-solvent method and applied for the catalytic hydrodechlorination of 4-chlorophenol (4-CP). A surface-supported catalyst (Pd/UiO-66) was synthesized by deposition-precipitation as a benchmark. Comprehensive characterization using ICP-OES, XRD, TEM, EDX mapping, XPS, and in situ CO-IR revealed that Pd@UiO-66 exhibited smaller Pd particle sizes, higher Pd dispersion, and a greater proportion of cationic Pd species (Pdn+) compared to Pd/UiO-66. These features enhanced the activation and cleavage of the C–Cl bond. Catalytic tests demonstrated that Pd@UiO-66 achieved >90% removal of 4-CP within 15 minutes, with phenol as the sole degradation product, showing significantly lower predicted toxicity (ECOSAR) than the parent compound. The kinetics followed the Langmuir-Hinshelwood model. Pd@UiO-66 exhibited 2.1 times higher initial activity and 1.2 times higher turnover frequency than Pd/UiO-66. Moreover, the pore confinement effect imparted high stability, with no significant loss in initial activity (within 10%) after five reaction cycles. These results highlight the potential of confined Pd catalysts for efficient removal of halophenolic odorants from water.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3983-4
Refrigeration is essential for modern society, supporting applications from household appliances and industrial manufacturing to microelectronics and biopharmaceutical cold chains. Conventional refrigeration technologies are constrained by environmental impact and low energy efficiency, emphasizing the importance of developing sustainable alternatives. Solid-state caloric refrigeration, particularly electrocaloric (EC) devices, offers a promising route owing to their high cooling efficiency, rapid electric-field-driven response, and potential for miniaturization. Significant progress has been achieved in various EC device configurations. However, EC devices still face challenges in achieving large temperature spans, high cooling power, and effective integration for specific applications. This review systematically summarizes these developments, focusing on device design and performance enhancement. It elucidates the fundamental and shared design strategies, classifies EC devices into fluid-based heat-transfer type, solid-based heat-transfer type, and thermal-resistance-modulated heat-switch architectures, and analyzes representative device structures, performance metrics, and application scenarios. Finally, energy-recovery strategies and future optimization directions toward more efficient EC systems are discussed. This work provides a comprehensive reference for the design innovation and practical implementation of EC-based solid-state refrigeration technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3982-6
Skin wounds are refractory due to antibiotic-resistant bacterial infection. Although photodynamic therapy (PDT) offers noninvasiveness, high efficiency, and no drug resistance, its therapeutic effect is constrained by the complex structure of wound tissue and diffuse drug distribution. The proinflammatory cytokine tumor necrosis factor-like weak inducer of apoptosis (TWEAK) regulates tissue repair by engaging its receptor Fn14, which is highly expressed in wounds. In this study, we developed a novel photosensitizer, the selenoviologen-TWEAK conjugate (SeV-Tp), to enhance selective enrichment and synergistically promote wound healing. In vitro analyses demonstrated that SeV-Tp, under visible light, generated high levels of reactive oxygen species, resulting in potent antibacterial activity against both Gram-positive and Gram-negative bacteria. Notably, SeV-Tp selectively bound to Fn14 and amplified fibroblast activation via photodynamic cooperation. In a mouse model of antibiotic-resistant Pseudomonas aeruginosa-infected wound, SeV-Tp accelerated healing by reducing bacterial burden, modulating the immune microenvironment, promoting collagen deposition, and stimulating hair follicle regeneration. Moreover, SeV-Tp preferentially accumulated within wound tissues with minimal adverse effects. SeV-Tp represents a strategy that selectively enriches and harnesses synergistic benefits from both components, positioning SeV-Tp as a promising photosensitizer for the treatment of refractory wounds.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511046
To evaluate the carbon footprint differences between the emerging ex-situ remediation facility mode and the conventional on-site remediation mode in China, this study employed the SEFA tool to calculate greenhouse gas (GHG) emissions and energy consumption for four typical remediation scenarios. Results indicate that the carbon emission intensity of solidification/stabilization (S/S) in the remediation facility is 12.00% higher than that of on-site S/S, with unit carbon intensities of 66.74 and 59.59 kgCO2e·m−3, respectively, and total energy consumption 11.90% higher. The soil transport segment in the facility S/S contributes 13% of carbon emissions, being the primary reason for its higher total carbon footprint. Conversely, thermal desorption (TD) in the facility exhibits 11.10% lower carbon emissions than on-site TD, with unit intensities of 269.16 and 302.78 kgCO2e·m−3, and total energy consumption 3.97% lower, mainly due to the utilization of landfill biogas as renewable energy for heat and power generation, while soil transport contributes only 3% of emissions. The reagent segment in S/S and the heat supply segment in TD account for 77%–86% and 70%–72% of total GHG emissions, respectively. The study demonstrates that remediation facilities, leveraging advantages such as landfill biogas, can actively aggregate contaminated soil from surrounding areas for centralized thermal desorption, which is beneficial for regional carbon emission reduction in soil remediation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511050
Municipal solid waste (MSW) management in Inner Mongolia has long relied on landfilling, facing land scarcity and leachate management challenges. This study addresses the region's dry, cold climate, high proportion of agricultural and livestock waste, fluctuating moisture content, and weak leachate treatment capacity. An engineering optimization was implemented on an 80 t·d−1 vertical rotary gasification-incineration system featuring a dual-combustion-chamber design (primary chamber for medium-temperature pyrolysis-gasification at 550–650 °C and secondary chamber for high-temperature oxidation above 900 °C), coupled with in-situ leachate recirculation. Field measurements showed improved processing capacity and continuous operation stability. Under the project's leachate yield, in-situ recirculation achieved on-site disposal without significant adverse effects on gasification-incineration conditions, providing buffering against moisture fluctuations. During the monitoring period, major gaseous pollutant emissions remained below current national standards. The results provide engineering references for the co-processing and stable operation of small-scale county-level MSW treatment facilities.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608008
Medium-chain fatty acids (MCFAs), including caproate and caprylate, are promising biobased products with high energy density, hydrophobicity, and chemical conversion value, serving as key intermediates linking organic waste valorization to circular economy development. Compared to conventional anaerobic digestion for methane, chain elongation (CE) via reverse β-oxidation (RBO) converts short-chain intermediates (e.g., acetate, lactate, ethanol) into higher-value carboxylic acids, offering a novel route for resource recovery from sewage sludge, food waste, agricultural residues, livestock manure, and high-strength organic wastewater. However, natural mixed-culture CE systems face constraints from substrate composition fluctuations, electron donor competition, methanogenic carbon diversion, insufficient product selectivity, product toxicity, and high separation costs, hindering stable, efficient, and targeted MCFA production. This review systematically summarizes the metabolic mechanisms, artificial regulation strategies, and engineering bottlenecks in CE-based MCFA production, emphasizing directed recovery of carbon and electron resources from organic wastes. Future directions include stable continuous-flow operation, product separation and recovery, techno-economic assessment, and life cycle evaluation. The review aims to provide insights for high-value organic waste utilization and synergistic optimization of carbon and energy recovery.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4124-x
Aerogel fibers, featuring distinct porous architecture and fiber flexibility, have emerged as leading materials for personal thermal protection; however, complex drying processes and singular thermal insulation mechanisms limit their use in complex environments. Here, aramid nanofiber/carbon nanotube (ANF/CNT) aerogel fibers integrating passive thermal insulation and active solar heating were fabricated via wet-spinning and ambient-pressure drying (APD). The incorporation of CNT and Ca2+ generates abundant physical and chemical crosslinking points, strengthening the nanofiber network skeleton and reducing structural collapse during APD to only 8.9% shrinkage. The resulting ANF/CNT aerogel textiles exhibit low thermal conductivity of 33.8–40.4 mW/(m K) and thermal insulation capability from −196 to 400 °C. The photothermal effect of CNT enables active solar heating, effectively supplementing passive insulation and allowing survival in extremely cold environments. In real tests, the synergistic effect improved skin temperature by up to 5.9 °C, significantly higher than 1.6 °C from passive insulation alone. These ANF/CNT aerogel fibers combine flexibility, mechanical strength, and flame retardancy, demonstrating promising potential for smart, controllable personal thermal management applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4032-x
This study introduces a dual-compatibility third component as an interfacial modifier to precisely regulate the active layer morphology of bulk heterojunction organic solar cells (BHJ-OSCs). This approach successfully suppresses excessive phase separation, significantly enhancing the performance of thick-film devices. The interface-styling strategy enhances donor–acceptor interactions, optimizes vertical phase separation morphology, extends exciton diffusion length, improves exciton dissociation efficiency, facilitates efficient charge transport, and effectively suppresses trap-assisted recombination. The ternary device based on PM6:PCN3:PY-IT achieved a power conversion efficiency (PCE) of 19.41%, which was much higher than that of the PM6:PY-IT binary system (18.67%). The device maintains excellent performance at an active layer thickness of 200 nm, achieving a high PCE of 18.25%. This study demonstrates the significance of using dually compatible molecules for interface modification in all-polymer solar cells (all-PSCs), providing theoretical guidance for the fabrication of high-performance thick-film devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3974-1
MAB-phase-derived compounds exhibit promising electromagnetic wave (EMW) absorption properties due to their unique layered structure and desirable physicochemical characteristics. Among them, Cr2AlB2 is particularly attractive owing to its excellent thermal and electrical conductivity. However, conventional synthesis of Cr2AlB2 requires inert gas protection to prevent oxidation, significantly increasing production costs and limiting its application in EMW absorption. To overcome this bottleneck, we report the successful synthesis of high-purity Cr2AlB2 in ambient air using the molten salt shielded synthesis (MS3) method. This approach not only isolates the material from oxygen interference but also reduces the synthesis temperature, offering a cost-effective and scalable route. The as-synthesized Cr2AlB2 exhibits outstanding EMW absorption performance: a minimum reflection loss (RLmin) of -42.10 dB at 12.6 GHz and a maximum effective absorption bandwidth (EABmax) of 3.44 GHz at a thickness of 1.9 mm. This work not only facilitates the large-scale production of Cr2AlB2 but also provides critical insights into its practical application as a high-performance EMW absorber.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4144-y
Developing efficient strategies for electrically manipulating two-dimensional magnetism at room temperature is a key challenge in contemporary spintronics. In this study, we demonstrate giant electromechanical control over the magnetism of the room-temperature van der Waals ferromagnet Fe3GaTe2 by integrating it with the ferroelectric α-In2Se3. Modest gate voltages lead to an almost complete suppression of the coercive field by 96.5%, corresponding to a remarkable peak modulation sensitivity of ~8.1 mT V−1, which stands out among existing van der Waals magnetoelectric systems. Importantly, this substantial magnetoelectric response is predominantly unaffected by voltage polarity, as both positive and negative gate voltages induce similar magnetic modulation effects. To elucidate the underlying mechanism, we tracked the voltage-induced Raman spectral changes, revealing a peak shift of 1.7 cm−1 that accurately represents an effective in-plane tensile strain of ~1.42% under an equivalent bias, demonstrating polarity independence as well. The synchronized magnetic response and strain variation unequivocally indicate that the induced tensile strain serves as the fundamental physical driver behind the magnetic modulation. Additionally, density functional theory calculations corroborate that the reduction in magnetic anisotropy induced by tensile strain results in a decrease in the coercive field. Our work establishes a novel and efficient approach for achieving voltage control of magnetism at room temperature in van der Waals multiferroic heterostructures, highlighting their significant potential for applications in ultra-low-power magnetic logic and sensing technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4068-2
Eutectic high-entropy alloys (EHEAs) combine multi-principal-element compositions with regular lamellar microstructures, offering exceptional high-temperature stability and mechanical properties. However, conventional casting yields random solidification microstructures and inhomogeneous phase distributions, constraining strength-ductility synergy. This study employs directional solidification (DS) on Al19Fe20Co20Ni41 EHEA to achieve precise microstructural control, constructing a multi-level lamellar architecture with a herringbone-like alternating arrangement. This tailored microstructure refines interlamellar spacing, eliminates detrimental isolated B2 phases, and promotes slip continuity at interfaces, enhancing coordinated dislocation motion and uniform distribution across multiple slip systems. Consequently, the DS EHEA exhibits superior mechanical properties compared to most reported thermomechanically processed and directionally solidified HEAs. Micro-mechanistic analysis reveals that homogenized geometrically necessary dislocation (GND) density, interface-assisted crack deflection, and multi-stage strain-hardening from sequential dislocation activation collectively contribute to outstanding strength-ductility synergy. This work demonstrates that programming solidification paths enables design of unique multi-level lamellar architectures, serving as intrinsic microstructural composites that optimize dislocation management and crack propagation, offering a novel paradigm for developing ultra-robust EHEAs for extreme service environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4051-x
Graphite lubricants are critical for high-quality and high-efficiency drawing of refractory metal wires, yet inadequate dispersion stability frequently challenges their practical application. Inspired by the bio-surfactant synergic mechanism that combines different bio-surfactants to collectively reduce surface energy and friction, a binary anionic surfactant system comprising sodium dodecyl benzene sulfonate (SDBS) and sodium lignosulfonate (SL) was engineered to enhance dispersion and stability via a synergistic effect. The synergistic parameter β was calculated to be −2.34, indicating strong synergism. The resulting graphite lubricants maintained homogeneous dispersion for up to 60 days. Molecular dynamics (MD) simulations combined with density functional theory (DFT) calculations confirmed that the synergistic effects originate from steric hindrance, electrostatic repulsion, π-π stacking, and hydrogen bonding. These hierarchical secondary interactions collectively increased the interfacial formation energy at the graphite/surfactant/water tri-phase interface, thereby effectively wetting particle powders and enhancing stability. During metal wire drawing, the graphite lubricants reduced the friction coefficient between the die and metal wires to 0.06, ultimately enabling drawn tungsten wires with superior surface integrity, expanded loop diameter, and enhanced tensile strength relative to single-surfactant benchmarks. This study provides experimental and theoretical guidance to design effective graphite lubricants for high-quality drawn metal wires.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4074-6
Achieving carbon neutralization relies heavily on green hydrogen and electrochemical carbon-nitrogen cycles. However, the complexity of these systems and the cost of traditional Edisonian trial-and-error methods hinder rapid progress. Artificial intelligence (AI) has emerged as a transformative tool, enabling high-throughput data processing and dynamic adaptation. This review surveys the landscape of AI-driven electrochemistry, bridging the gap from atomic-scale design to industrial-scale implementation. Specifically, we focus on three areas: atomic structure-function decoding, fully automated “self-driving” laboratories, and macro-scale simulations for device durability. Furthermore, we elucidate the critical challenges in integrating AI with materials science. By mapping current trends and future directions, this work aims to unlock the full transformative potential of AI in next-generation energy storage and conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4096-7
Hexagonal boron nitride (h-BN) nanomaterials exhibit exceptional properties but suffer from severe aggregation due to undesirable surface characteristics, limiting their application in polymer nanocomposites. Existing covalent functionalization methods often compromise between time efficiency, energy consumption, and structural integrity. This study presents a rapid, room-temperature catalytic grafting strategy using tris(pentafluorophenyl)borane (B(C6F5)3) to functionalize h-BN nanoflakes bearing edge hydroxyl groups. The reaction between B–OH groups and activated Si–H bonds of hydrosilanes proceeds under mild conditions, preserving the structural integrity of h-BN. Density functional theory (DFT) calculations confirm the catalytic feasibility and elucidate two possible reaction pathways: backside-attack and flank-attack mechanisms. The modified h-BN exhibits significantly improved dispersibility in low-polarity solvents and tunable surface properties. This efficient method offers a versatile platform for h-BN surface engineering, facilitating broader practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4104-4
Covalent organic frameworks (COFs) are promising adsorbents for gas adsorption and separation, yet identifying optimal structures among their vast design space requires efficient high-throughput screening. Conventional machine-learning predictors rely heavily on specific gas-related features, which are time-consuming and limit scalability, leading to inefficiency and labor-intensive processes. Here, we propose COFAP, a universal COFs adsorption prediction framework that extracts multi-modal structural and chemical features via deep learning and fuses these complementary features through a cross-modal attention mechanism. Without relying on explicit gas-specific thermodynamic descriptors, COFAP achieves state-of-the-art prediction performance on the hypoCOFs dataset under the conditions investigated, outperforming existing approaches. Based on COFAP, we found that high-performing COFs for gas separation concentrate within a narrow range of pore size and surface area. A weight-adjustable prioritization scheme is also developed to enable flexible, application-specific ranking of candidate COFs. Superior efficiency and accuracy render COFAP directly deployable in crystalline porous materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4163-y
Liquid metals (LMs) are promising catalyst systems due to their unique interfacial properties, yet migration and aggregation of active species cause performance degradation. Here, we report a composition optimization strategy using a Ga-In eutectic liquid metal support to reduce surface energy and achieve homogeneous incorporation of Cu species (GaIn-Cu). Comprehensive characterizations confirm uniform Cu dispersion, which inhibits migration and formation of CuGa2 intermetallic phases during CO2 electroreduction (CO2RR). The GaIn-10-Cu catalyst achieves a maximum CH4 Faradaic efficiency of 73.49% at -0.8 V vs. RHE, significantly higher than Ga-Cu (61.49%). Moreover, GaIn-10-Cu exhibits enhanced stability for CH4 generation over 40 h of continuous operation. In-situ spectroscopic studies reveal that GaIn-10-Cu favors formation and protonation of key *CHO and *OCH3 intermediates, steering selectivity toward CH4. This work demonstrates that tuning LM composition modulates catalytic site performance, offering a strategy for durable and selective LM-based electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4411-4
Wearable medical monitoring devices require conformal, long-term tissue integration, yet conventional rigid electronics fail to accommodate dynamic tissue deformation. This highlight examines the structural regulation logic of slidable van der Waals (vdW) layers as an instructive design paradigm for flexible bioelectronic materials. The approach leverages weak interlayer interactions to enable adaptive sliding, reducing interfacial stress and enhancing mechanical compliance. Key advances include spray-based fabrication, which offers scalability and cost-effectiveness for industrial translation. The strategy addresses bottlenecks in deep-tissue dynamic physiological monitoring, where existing interfaces suffer from mechanical mismatch and signal degradation. By tuning mechanical performance, enabling low-cost mass manufacturing, and integrating multi-hardware systems, this interface strategy promises to accelerate the transition from laboratory prototypes to clinical and consumer wearable devices. The highlight synthesizes recent literature, including a movable long-term implantable soft microfibre (Nature, 2025) and drawn-on-skin electronic tattoos (Sci Adv, 2026), to contextualize the vdW sliding approach. Quantitative metrics from these studies—such as mechanical compliance, operational stability, and fabrication throughput—are discussed to underscore industrial viability. The findings suggest that vdW layer sliding can be engineered to achieve fatigue resistance and conformal contact, critical for chronic implantation. This work provides a framework for designing next-generation bioelectronic interfaces, with implications for personalized medicine and remote health monitoring.