SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4286-4
Multifunctional nanoplatforms capable of efficiently regulating both emerging and classical cell death mechanisms, thereby overcoming the adaptive resistance of malignant cells to certain cell death modalities, remain a significant challenge. Herein, we propose a new concept for the self-assembly of zinc-cystine coordination networks on curcumin (Cur) drug nanocrystals (DNCs) to construct Cur@PDA@GOx/Zn-Cys (CPGZC) nanoplatforms, enabling enhanced antitumor therapy through multicomponent synergistic modulation of both newly identified disulfidptosis and classical apoptosis. At tumor site, GOx-mediated glucose depletion reduces nicotinamide adenine dinucleotide phosphate (NADPH) levels, which can impair the intracellular conversion of cystine to cysteine. Combined with the exogenous cystine delivered by CPGZC NPs, rapid intracellular disulfide accumulation strongly activates disulfidptosis. Simultaneously, the reduction in NADPH levels inhibits GSH biosynthesis, augmenting the intracellular ROS levels elicited by Cur DNCs within the CPGZC nanoplatforms. Moreover, the elevated oxidative stress, in synergy with the excessive Zn2+ introduced, aggravates mitochondrial damage, thereby further amplifying apoptosis. Consequently, the synergistic modulation of disulfidptosis and apoptosis induces a potent antitumor response, as validated by comprehensive in vitro and in vivo investigations. This study opens new avenues for the development of multifunctional nanoplatforms for enhanced cancer therapy through the effective integration of both emerging and classical cell death mechanisms, which may serve as a promising strategy to advance our comprehension of synergistic utilization of various cell death mechanisms and combat with complex cancers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4279-0
Inkjet printing has emerged as a viable additive manufacturing route for organic light-emitting diodes (OLEDs), offering drop-on-demand patterning, high material utilization, and compatibility with large-area flexible substrates. This review critically examines the formulation science, printhead physics, and drying kinetics that govern the quality of inkjet-printed organic layers. We analyze the rheological window required for stable jetting, typically 1–20 mPa·s viscosity and 25–45 mN/m surface tension, and the dimensionless Ohnesorge number (0.1 < Z < 1) that defines satellite-free droplet formation. The coffee-ring effect, driven by capillary flow and solvent evaporation gradients, remains the dominant failure mode for pixel non-uniformity; binary solvent systems and substrate temperature control (40–60 °C) mitigate this. We survey recent progress in printed hole-transport, emissive, and electron-transport layers, with particular attention to cross-linkable hole-transport materials that resist interlayer dissolution. Device performance metrics from printed OLEDs now reach external quantum efficiencies of 15–20% for fluorescent emitters and >25% for phosphorescent systems, with operating lifetimes (T95) exceeding 1,000 hours at 1,000 cd/m². We identify remaining bottlenecks: nozzle clogging from aggregated nanoparticles, film thickness variation across large panels, and the absence of standardized ink formulations. The review concludes with a roadmap for industrial adoption, emphasizing in-line metrology and closed-loop process control as prerequisites for yield parity with vacuum-deposited OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4313-7
Liquid-to-vapor mass transfer is central to energy and environmental processes. Conventional distillation relies on vapor-liquid equilibrium and device-level optimization, with materials playing passive structural roles. Non-boiling processes such as membrane distillation and interfacial solar evaporation localize phase change at confined interfaces, making mass transfer a materials-mediated transport phenomenon where interfacial structure and chemistry dictate evaporation kinetics, vapor escape, and solute rejection. Janus interface materials, featuring spatially separated hydrophilic and hydrophobic domains, introduce architectural asymmetry to regulate liquid-to-vapor mass transfer. This review summarizes recent advances, highlighting mechanisms including the cooperative pump-valve effect, nanoconfinement-enhanced transport, and mitigation of fouling and scaling. Representative applications in membrane distillation, solar-driven evaporation, and personal thermal-moisture management are systematically discussed. Key challenges and future opportunities are outlined, particularly in advancing fundamental understanding, scalable fabrication, and practical implementation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4294-4
Room-temperature phosphorescence (RTP) polymer materials are attractive for flexible electronics and information encryption due to their tunability and processability. However, achieving polymeric RTP systems that simultaneously exhibit high thermal sensitivity, reversible multicolor emission, and long phosphorescence lifetime (τPhos) with high quantum yield (ΦPhos) remains challenging. Here, we report an in-situ cross-linked self-assembly strategy that converts flexible polymers into rigid polymer microspheres, yielding long τPhos, high ΦPhos, and thermally and time-dependent tunable RTP. The resulting microspheres (PM0.1-0.01-1) exhibit a maximum τPhos of 1754 ms and ΦPhos of 42.83%, markedly superior to previously reported intrinsic polymer RTP materials. At 77 K, they display ultralong green emission with a lifetime of 6019 ms and visible afterglow lasting up to 99 s. The cross-linked microspheres enable time-dependent, continuously tunable RTP and thermally responsive color switching, while maintaining excellent phosphorescence stability in aqueous and high-temperature environments. This provides a versatile platform for dynamic information encryption, full-color afterglow LEDs, and temperature sensing. The strategy establishes a general design principle for developing multidimensional, controllable, and stable high-performance polymer RTP materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4493-8
Metal halide perovskite photovoltaics have achieved power conversion efficiencies rivaling crystalline silicon, yet their transition from laboratory-scale devices to commercial deployment requires a paradigm shift toward application-specific engineering and macroscopic system integration. This review systematically evaluates the customized deployment of perovskite solar cells (PSCs) across diverse operational theaters, including building-integrated photovoltaics (BIPV), portable Internet of Things (IoT) systems, agricultural photovoltaics (Agri-PV), vehicle-integrated photovoltaics (VIPV), utility-scale tandems, and extreme space environments. Despite these opportunities, critical challenges persist in translating laboratory achievements into industrial-scale production. We critically evaluate primary bottlenecks hindering gigawatt-scale commercialization, focusing on the performance gap inherent in large-area manufacturing. Additionally, we analyze intrinsic material instabilities driven by dynamic ion migration and multi-scale lattice strain under realistic outdoor conditions. To conclude, we outline a strategic roadmap for overcoming these barriers, emphasizing lattice strain regulation, rigorous dynamic environmental testing protocols, and comprehensive sustainable lifecycle management. By synergizing mechanistic insights with scalable manufacturing and ecological assessments, this review provides a holistic framework to accelerate the ubiquitous commercialization of customizable, stable, and high-efficiency perovskite energy systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4269-4
Self-assembled molecular interlayers (SAMs) are promising hole-selective contacts for high-efficiency organic solar cells (OSCs) due to their well-defined energy alignment and minimal parasitic absorption. However, their intrinsically limited mechanical robustness often leads to structural degradation and performance loss under mechanical deformation, restricting their application in flexible devices. Here, we report a nanoparticle-reinforced self-assembled composite interface that simultaneously enhances mechanical reliability and optoelectronic performance. Uniformly dispersed SiO2 nanoparticles are introduced as high-modulus reinforcing building blocks without disturbing molecular self-assembly. In contrast to NiOx nanoparticles, which suffer from aggregation and parasitic absorption, SiO2 nanoparticles exhibit excellent dispersion and optical transparency, enabling formation of a structurally compatible hybrid interface. Mechanistic studies reveal that SiO2 nanoparticles redistribute interfacial stress and form dynamic hydrogen-bond networks with phosphonic acid groups of 2PACz, providing efficient energy dissipation during cyclic deformation. Meanwhile, modulation of interfacial polarity extends the crystallization time window of the active layer, resulting in enhanced molecular ordering and improved charge transport. As a result, devices based on the SiO2/2PACz composite interface achieve a power conversion efficiency of 20.14% for rigid devices and 19.30% for flexible devices, placing the flexible devices among the highest-performing flexible OSCs reported to date, while retaining over 90% of their initial efficiency after repeated bending cycles. This work establishes a general strategy for overcoming the trade-off between electronic selectivity and mechanical robustness in ultrathin self-assembled molecular interfaces, providing design insights for high-performance flexible organic optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4342-3
Electron acceptors containing single-bond-linked building blocks offer attractive advantages for organic solar cells owing to their synthetic simplicity and structural modularity. However, achieving backbone planarity without compromising electronic compatibility remains a persistent challenge. Conventional conformational locking strategies based on alkoxy substitution can effectively suppress torsional freedom but often elevate the highest occupied molecular orbital energy level, limiting compatibility with widely used donor polymers. Here, we report a partially fused electron acceptor design that achieves intrinsic backbone planarity through heterocycle selection rather than side-chain-assisted conformational locking. By incorporating a benzodifuran core and furan-thiophene linkages, the resulting acceptors exhibit a near-coplanar backbone geometry as revealed by density functional theory calculations, without the need for electronically perturbing alkoxy groups. Devices based on the optimized acceptor (BDF-1) deliver a binary power conversion efficiency of 12.2%, and further improvement to 19.5% is achieved in a ternary blend with PM6 and BTP-eC9. The enhanced performance is accompanied by favorable morphology, balanced charge transport, and suppressed recombination losses. This work provides molecular-level insight into partially fused acceptor design and demonstrates that heteroatom-guided conformational locking offers a viable strategy for expanding the design space of acceptors with single-bond-linked building blocks while maintaining compatibility with mainstream donor systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4337-2
Silica aerogels are recognized as leading super-insulating materials due to their ultralow thermal conductivity, yet their intrinsic brittleness and poor processability restrict practical deployment in complex industrial and extreme environments. This study introduces a macro-scale 'stiff–soft' synergistic strategy, combining a macroscopically processable, soft-and-tough framework as the load-bearing component with hard-and-brittle polymethylsilsesquioxane (PMSQ) aerogels as the insulating component. A pressure-driven assembly process enables viscosity-tunable PMSQ gel inks to be controllably infused into various hollow frameworks, including honeycomb panels, wheat straws, and hollow fibers. Guided by a modified Hagen–Poiseuille model, ink viscosity is precisely matched to the geometric parameters of the hollow structures. The resulting composites achieve compressive strength of 2.5 MPa, flexural strength of 6.25 MPa, and tensile strength of 40 MPa, while maintaining excellent thermal insulation. This versatile and scalable approach offers a new design paradigm for mechanically adaptive silica aerogel composites in thermal management applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3828-y
The rapid development of halogen-free solvent-processed organic solar cells (OSCs) has been enabled by side-chain modification on small molecular acceptors, yet the structure-property relationship between inner/outer chain lengths and device performance remains unclear. This study systematically investigates five non-fullerene acceptors (NFAs) with varied side-chain positions and architectures, clarifying the effects of inner versus outer modifications on energy level distribution, film morphology, and carrier dynamics. Notably, longer alkyl chains are not always superior; excessive solubility reduces molecular packing order. The optimized PM6:BTP-TO12 blend achieves a power conversion efficiency (PCE) of 18.2%. Furthermore, ternary OSCs incorporating BTP-TO12 as a guest material reach a remarkable PCE of 19.5%, enhancing the performance of L8-BO-based devices processed with green solvents. This improvement is attributed to the low energy loss and well-controlled aggregation behavior of BTP-TO12 in environmentally friendly toluene. These findings establish a design guideline for side-chain engineering in green-solvent-processed OSCs, achieving state-of-the-art performance and advancing scalable, eco-compatible photovoltaic technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3579-8
Metal sulfides such as CdS are promising for solar-driven H2O2 production but suffer from rapid charge recombination and severe photocorrosion. This study introduces a dual-functional strategy synergizing sulfur vacancy (Sv) engineering and polydopamine (PDA) coating to overcome these limitations. Sv-CdS nanorods were hydrothermally synthesized with tunable vacancy concentrations, followed by in-situ PDA deposition to construct a direct Z-scheme heterojunction. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations reveal that the introduction of S vacancies reduces the work function of CdS, facilitating energy level alignment with PDA and enabling efficient electron transfer from CdS to PDA. By tuning the concentration of S vacancies, the charge transfer efficiency can be maximized. As a result, the photocatalytic H2O2 production rate reaches 2539.5 μmol g−1 h−1 under visible light, and further increases to 4395.5 μmol g−1 h−1 after PDA encapsulation—15.6 times higher than that of pristine CdS. Concurrently, PDA enhances O2 adsorption and protects Sv-CdS from photocorrosion. Sv-CdS@PDA exhibited superior photostability compared to Sv-CdS after three consecutive photocatalytic cycles. Mechanistic studies suggest that the Z-scheme heterojunction effectively separates electron-hole pairs: electrons in the conduction band of CdS reduce O2 to ·O2−, which is subsequently converted to H2O2, while holes in the valence band of Sv-CdS oxidize water to replenish O2. This work provides fundamental insights into engineering charge transfer and stability in sulfide-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3700-7
Photocatalytic synthesis has been considered a promising technology for solar-to-chemicals conversion. Here, a series of novel photocatalysts was synthesized by decorating uranyl sites on imine-based covalent organic frameworks (i-COF) and proved functioning for the uniformly boosted H2O2 production by 1.6–10.1 folds compared with the bare i-COFs in a wide pH range from 2 to 11. Typically, an optimal H2O2 production rate of 1435.9 μmol g−1 h−1, i.e., 28.72 mmol g(U)−1 h−1, was realized over uranyl decorated TTa-COFs under visible light. Systematic investigations reveal that the universally and remarkably promoted performance is attributed to the outstanding electron-transfer ability, accelerated activation of molecular oxygen and favored formation of ·O2− and *OOH as the key intermediate by virtue of the decorated uranyl ions; thus the two-step single-electron oxygen reduction reaction (ORR) for H2O2 photo-generation is significantly facilitated. This work paves a new way for the uranyl-decorated COFs as a novel photocatalyst and provides in-depth insight to the reaction mechanism for photocatalytic H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3559-5
Polyamide (PA) membranes are promising for lithium extraction from spent lithium-ion battery (LIB) leachate but face a trade-off between selectivity and permeability. Here, we demonstrate that nascent PA membranes post-grafted with triaminoguanidinium (TAG) monomers (PA-TAG membranes) gain expanded ion passage channels (0.8–7.1 Å) and enhanced positive charge, achieving high-performance lithium separation. The PA-TAG membrane exhibits a pure water permeance (PWP) of 15.5 L m−2 h−1 bar−1, superior divalent ion rejection (~98%), and an excellent separation factor (~30), significantly outperforming pristine PA membranes. In a simulated acidic battery leachate, the PA-TAG membrane achieved a relative volumetric lithium recovery rate of 48.2% after a two-stage nanofiltration process, with the Li+/M2+ mass ratio of the second permeate reaching 53.35, 445 times that of the feed (0.12). The membrane maintained stable performance over 45 hours of nanofiltration and resisted acidic conditions (pH=2) for at least 20 days. These results highlight the potential of PA-TAG membranes for efficient lithium extraction from acidic battery leachate, addressing the critical need for sustainable recycling of spent LIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3648-2
Transient energy storage devices represent an emerging class of biodegradable power systems that provide temporary energy for implantable medical electronics before safely degrading in vivo. From early transient primary batteries to contemporary rechargeable batteries integrated with wireless charging systems, these devices have evolved to enable stable prolonged power supply. Through rational transient design and structural engineering, they achieve desirable electrochemical performance, tunable degradation rates, and mechanical compatibility with soft, irregular, and dynamic biological tissues. This work provides a critical review of state-of-the-art transient energy storage devices, including transient primary batteries, transient secondary batteries, and transient supercapacitors, with emphasis on their electrodes, electrolytes, encapsulation materials, fabrication processes, and applications. We critically analyze material selection strategies, transient design principles, and architecture design for various transient batteries and capacitors. Finally, we discuss existing challenges and outline future directions to guide the clinical translation of biodegradable power solutions for biomedical implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3682-6
Metal single-atoms with optimized coordination structure on highly accessible substrate can maximize the metal utilization efficiency along with enhancing catalytic activities. Herein, axial nitrogen-coordinated Fe-N5 sites on N-doped carbon (denoted as FeN5@N-C) hollow microplates are fabricated via a unique Fe3+-chelated polydopamine assisted hollowing strategy using ZIF-L microplates as multifunctional templates. Due to the powerful chelating and adhesive ability of polydopamine, this hollow-carbon strategy can be extended to fabricate single-atom Fe-N-C hollow structures with different shapes and encapsulate other transition-metal single atoms (Ni, Co, Mn, and Cu) into the N-doped carbon hollow microplates. The FeN5@N-C hollow microplates exhibit outstanding oxygen reduction reaction (ORR) capability with an impressive half-wave potential of 0.93 V vs. reversible hydrogen electrode and high stability, which can serve as air-cathode catalysts for high-performance Zn-air batteries with high peak power density of 225.3 mW cm−2 and stable cyclability of up to 400 h. Comprehensive analysis and theoretical calculations elucidate that axial nitrogen coordination in Fe-N5 catalytic sites, unlike the planar Fe-N4 configuration, can compete well with the bonding of OH* through additional 3d-2p orbital hybridization, thereby giving moderate bonding strength to enhance the ORR activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3761-7
Ruthenium-based materials, including metallic Ru and RuO2, are promising electrocatalysts for electrochemical water splitting (EWS) due to their high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, their practical application is hindered by the relatively strong adsorption of reaction intermediates on Ru surfaces and the oxidative dissolution of RuO2 under operating conditions. This review provides a comprehensive overview of recent progress and challenges in Ru-based electrocatalysts for EWS. We first summarize the fundamentals of EWS, including reaction mechanisms and activity descriptors. Then, we detail typical synthesis methods such as hydrothermal/solvothermal syntheses, organic ligand-assisted syntheses, pyrolysis, acid etching, cation exchange, and molten salt-assisted syntheses. Subsequently, we focus on enhancement strategies, including alloying, doping, structure design, interface engineering, single-atom catalyst design, high-entropy alloy design, phase engineering, and defect engineering, with typical examples illustrating structure-property correlations. Finally, we address remaining challenges and future prospects for the development of efficient and durable Ru-based electrocatalysts for sustainable hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3762-9
The integration of interfacial photothermal conversion and hydrovoltaic effects into bifunctional evaporators offers a promising route to simultaneously address freshwater scarcity and energy demands. However, the development of low-cost bifunctional evaporators and elucidation of the underlying co-generation mechanism remain challenging. Here, we report a porous carbon derived from waste polyester via a metal-organic framework (MOF)-assisted carbonization strategy, which is subsequently fabricated into a bifunctional evaporator for freshwater and hydroelectricity co-generation. The porous carbon exhibits a high specific surface area of 904 m² g⁻¹, hierarchical micro- and mesopores, and abundant oxygen-containing groups. The resulting evaporator demonstrates broadband light absorption, localized thermal management, good hydrophilicity, and high flexibility. Under 1 sun illumination, it achieves an open-circuit voltage of 250 mV, a short-circuit current of 14 μA, and an evaporation rate of 2.34 kg m⁻² h⁻¹, ranking among the most efficient freshwater-hydroelectricity co-generators. The weakened hydrogen-bonding network reduces the water evaporation enthalpy to 1.7 kJ g⁻¹. Mechanistic studies, including molecular dynamics simulations, reveal that selective Na⁺ interaction induces differential ion migration rates, generating a streaming potential. Additionally, the photothermal effect enhances voltage output by promoting interfacial ion concentration gradients. Outdoor tests confirm stable voltage output of 250 mV and freshwater production of 2.34 kg m⁻². This work provides a scalable platform for fabricating advanced evaporators from waste plastics and unravels the co-generation mechanism, offering a sustainable strategy to mitigate freshwater and energy crises.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3788-9
Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization. Here, we introduce 2-iodoimidazole (IIZ) into the perovskite precursor, enabling the formation of an air-stable pure δ-phase intermediate, which, upon annealing, fully transforms into a highly oriented α-phase perovskite film with reduced defects and variability. Leveraging this approach, we achieve a stabilized power conversion efficiency of 20.9% for 927.5 cm2 perovskite solar modules with high reproducibility. The encapsulated modules meet stringent international photovoltaic testing standards (IEC61215:2021), demonstrating excellent stability under continuous operation, thermal cycling (−40 to 85 °C) and damp heat (85 °C and 85% relative humidity).
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3689-9
Converting body heat into electricity presents an appealing route for sustainably powering wearable electronics; however, conventional thermoelectric materials face significant drawbacks, including high ionic concentrations, toxicity, and limited thermoelectric efficiency. Here, we report an ionic thermoelectric hydrogel designed through precise supramolecular chemistry, utilizing dual molecular interactions: host-guest complexation of α-cyclodextrin (α-CD) with I3− ions and hydrogen bonding between polyvinyl alcohol (PVA) polymer chains and I3−. This molecularly tailored approach markedly amplifies thermoelectric performance, achieving a high thermopower of 2.21 mV/K and a tenfold enhancement in peak power output at an exceptionally low iodine concentration (10 mmol/L I− + 2.5 mmol/L I3−). The hydrogel maintains excellent biocompatibility and mechanical robustness, suitable for direct skin contact. Demonstrated applications include flexible thermoelectric devices generating nearly 100 mV from body heat and sensor arrays capable of motion and spatial temperature sensing. These results underscore the substantial potential of supramolecularly designed ionic thermoelectric hydrogels for wearable energy harvesting, personalized healthcare monitoring, and advanced human-computer interfaces.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508004
Industrial processes generate substantial low-grade waste heat and cold, which can be harnessed via thermoelectric generators (TEGs) based on the Seebeck effect. However, the low-voltage output of TEGs poses application challenges. This study investigates a TEG-driven electrodeposition system for efficient treatment of low-concentration copper-containing wastewater from electroplating, integrated circuit, and energy industries. The TEG system, comprising two series-connected semiconductor modules, achieved a maximum power of 0.36 W at a temperature difference (ΔT) of 130 °C. Optimal operating parameters for the coupled system were determined: ΔT = 90 °C, counter-current flow (two-side inlet), flow rate of 20 mL·min⁻¹, initial Cu²⁺ concentration of 500 mg·L⁻¹, and electrode gap of 0.7 cm. Under these conditions, after 60 min of electrodeposition, copper removal efficiency reached 99.42%, current efficiency was 67.93%, and the energy conversion efficiency of the TEG-electrodeposition system was 36.96%. The system also treated real copper-containing wastewater, achieving 95.83% removal within 100 min. Characterization via SEM, XRD, and XPS revealed that the electrodeposited product consisted of metallic copper and cuprous oxide, with metallic copper accounting for approximately 60%. This work provides a promising approach for utilizing industrial waste heat and cold to achieve low-energy, high-efficiency treatment of heavy metal wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506020
The rotary kiln roasting of lepidolite for lithium extraction faces challenges of unstable lithium conversion rates and high energy consumption. To address this, a multi-objective optimization method coupling improved neural network simulation with a multi-objective genetic algorithm was proposed, targeting the synergistic optimization of lithium conversion rate (TRLi) and natural gas consumption intensity (EIng). Using long-term industrial time-series data of batching parameters and kiln operating variables, back-propagation (BP) neural network and its particle swarm optimization (PSO) improved variant were developed to model TRLi and EIng. The PSO-BP model demonstrated superior accuracy in capturing the complex nonlinear relationships, reducing mean absolute percentage errors (MAPE) to 0.278 and 0.284 for TRLi and EIng, respectively. Subsequently, the non-dominated sorting genetic algorithm II (NSGA-II) was employed to construct a multi-objective optimization model, yielding a Pareto-optimal set of process parameters that maximize TRLi and minimize EIng. The results revealed that under NSGA-II optimized conditions, TRLi could be stabilized between 82.45% and 87.96%, an average increase of 3.61 percentage points over baseline operations, while EIng could be reduced to 53.7 m3 per ton of clinker. For an annual processing capacity of 3.2×105 tons of lepidolite concentrate and sulfate mixture, this corresponds to an additional 127.1 tons of lithium metal recovery, a reduction of 1,964,912 m3 in natural gas consumption, and a decrease of 3,763.84 tons in CO2 emissions annually. This study provides theoretical and technical support for the green, high-quality, and low-carbon supply of critical raw materials for the lithium battery new energy industry.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507057
This study presents a novel electrochemical sensor for the rapid detection of trace lead ions (Pb(II)) in water, utilizing a rod-shaped bismuth-based electrode. The electrode was fabricated by modifying a glassy carbon electrode (GCE) with basic bismuth nitrate [Bi6O5(OH)3](NO3)5·3H2O, synthesized via a chemical precipitation method. The sensor was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), electron probe microanalysis (EPMA), and energy-dispersive X-ray spectroscopy (EDS), confirming the rod-like morphology and composition. Electrochemical detection was performed using differential pulse voltammetry (DPV) in a 0.1 mol·L−1 NaAc-HAc buffer (pH 4.3). The sensor exhibited a linear detection range for Pb(II) from 1 to 90 μg·L−1, with a detection limit of 0.34 μg·L−1 and a sensitivity of 106 μA·(μmol·L−1)−1. The electrode demonstrated excellent anti-interference capability and reproducibility. Recovery tests in real water samples (tap water and campus lake water) yielded high recovery rates, indicating practical applicability. This work provides a simple, cost-effective, and reliable method for monitoring trace Pb(II) in environmental water, particularly relevant for public swimming pools and similar aquatic facilities.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025121602
This study characterized the body burden of polybrominated diphenyl ethers (PBDEs) in a physical examination population in Shenzhen and evaluated its impact on thyroid function. Serum samples from 368 residents were analyzed for eight PBDE congeners using atmospheric pressure gas chromatography-tandem mass spectrometry (APGC-MS/MS). The median concentration of ∑8PBDEs was 10.2 ng·g⁻¹ lipid weight (lw), ranging from 0.13 to 2089.4 ng·g⁻¹ lw, with BDE-209 predominating (59.7% of total). Multiple linear regression revealed that a 1.7-fold increase in serum BDE-153 was associated with a 0.4% increase in free triiodothyronine (FT3) (P<0.05), while a 1.7-fold increase in BDE-183 was associated with a 0.9% decrease in total triiodothyronine (T3) and a 0.7% decrease in FT3 (P<0.05). Bayesian kernel machine regression (BKMR) indicated a negative correlation between mixed PBDE exposure and thyroid-stimulating hormone (TSH) at high exposure levels. Weighted quantile sum (WQS) regression showed that mixed exposure was associated with decreased T3 levels and T3/FT3 ratio, with BDE-153 and BDE-183 as the primary contributors. These findings suggest that PBDE exposure may adversely affect thyroid function and disrupt thyroid hormone homeostasis, with BDE-183 and BDE-153 playing key roles. This study provides a scientific basis for PBDE health risk assessment and thyroid protection.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025101101
Acetamiprid, a representative neonicotinoid insecticide, persists in soil and water, posing ecological risks. This study evaluated its transgenerational toxicity in Caenorhabditis elegans exposed to 1, 10, and 100 μg·L−1. Direct exposure (F0) caused neurobehavioral abnormalities, with head swing frequency significantly increased by 23.86% even at 1.0 μg·L−1, correlating with disrupted acetylcholinesterase and γ-aminobutyric acid. Reproduction, development, metabolism, and intestinal barrier were impaired, with reactive oxygen species elevated by 30.42%–48.28%, indicating oxidative stress as a mechanism. Effects transmitted to unexposed T1–T3 generations: at 1.0 μg·L−1, body width inhibition persisted to T2; fat accumulation and intestinal permeability effects intensified with concentration. Among oxidative stress biomarkers, superoxide dismutase showed highest sensitivity and transgenerational persistence. This study reveals multidimensional transgenerational toxicity, informing soil ecological risk assessment of neonicotinoids.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604022
The resource utilization of food waste contributes to reducing environmental pollution, driving nutrient cycling and biomass energy development, and promoting the resource recycling industry, achieving a win-win outcome for environment and economy. This study evaluated the resource recovery performance and environmental impacts of producing carbon sources for wastewater treatment through hydrolysis and acidification of food waste, comparing with two conventional alternatives: anaerobic fermentation and incineration. Results showed that among the three technologies, hydrolysis for carbon source production ranked middle in resource recycling efficiency, but its environmental benefits were superior to incineration and anaerobic fermentation. The hydrolysis process did not produce additional wastewater requiring treatment, and its greenhouse gas emissions and solid waste generation intensity were relatively low, at -40.7 kg CO2-eq/t and 9.3%, respectively. Carbon sources derived from food waste can replace commercial alternatives, reducing wastewater treatment costs and promoting synergies between pollution reduction and carbon mitigation. Sensitivity analysis revealed that water content in food waste significantly influences solid impurity generation and energy recovery efficiency of hydrolysis technology. In regions with high food waste generation and carbon source demand, hydrolysis technology is recommended to facilitate large-scale synergistic treatment of wastewater and food waste.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3464-4
Photocatalytic conversion of atmospheric CO2 (0.03%) into multi-carbon fuels remains a grand challenge due to the high energy barrier of C–C coupling and the low concentration of CO2. Here, we report the construction of multiple metal pair sites on metal oxide nanosheets to steer C–C coupling, enabling efficient photoreduction of air-concentration CO2 to ethane (C2H6). As a prototype, Au nanoparticles were anchored on Bi4Ti3O12 nanosheets (Au-Bi4Ti3O12). High-resolution transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the formation of Au-Ti metal pair sites at the interface. In situ Fourier transform infrared spectroscopy revealed the presence of *OCCOH intermediate on Au-Bi4Ti3O12 during CO2 photoreduction, which was absent on pristine Bi4Ti3O12. Density functional theory calculations showed that the Gibbs free energy for *CO–COH formation on Au-Bi4Ti3O12 is 2.23 eV, significantly lower than that on Bi4Ti3O12 (3.59 eV), indicating facilitated C–C coupling. Consequently, Au-Bi4Ti3O12 exhibited a C2H6 evolution rate of 2.58 μmol g−1 h−1 under 0.03% CO2, whereas Bi4Ti3O12 produced only C1 products (CO and CH4). This work demonstrates the first single-catalyst photoreduction of atmospheric CO2 to C2H6, highlighting the effectiveness of engineered multiple active sites in overcoming the C–C coupling bottleneck.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61106-7
Hard carbon anodes for sodium-ion batteries suffer from limited capacity, low initial Coulombic efficiency, and poor long-term cycling stability. To address these issues, we report a dual-stabilization strategy that combines micropore confinement and chemical bonding to control sulfur species in coal-derived hard carbon. Bituminous coal, with its naturally condensed aromatic framework, serves as the carbon precursor. A two-step thermal process first constructs a microporous carbon framework, followed by gas-phase sulfidation to introduce sulfur. The sulfur is confined within micropores and forms stable covalent C–S bonds with the carbon matrix, providing synergistic physical–chemical stabilization. This suppresses sulfur migration, prevents interfacial side reactions, and introduces additional redox-active sites. The optimized sample (HC-10) delivers a high reversible capacity of 450 mAh/g after 800 cycles at a current density of 1 A/g, with excellent rate capability and cycling stability. Mechanistic analysis reveals that the stabilized sulfur species reversibly participate in sodium-ion storage and improve interfacial kinetics. This work provides an effective strategy for stabilizing sulfur in coal-derived carbon materials and offers insights into the design of high-performance anodes for sodium-ion batteries.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508041
Lead oxide nanoparticles (PbO NPs) are increasingly released into aquatic environments from industrial processes, posing ecological risks. Duckweed (Landoltia punctata) is a known lead hyperaccumulator, but its physiological and biochemical responses to PbO NPs remain unexplored. This study synthesized PbO NPs via a plant-mediated biosynthesis method and exposed L. punctata to concentrations of 0 (control), 10, 20, 30, and 40 mg·L−1 in hydroponic culture for 7 days. Results showed concentration-dependent effects: low concentrations (10–20 mg·L−1) stimulated growth, while high concentrations (≥30 mg·L−1) inhibited fresh weight, growth rate, and root length. Chlorophyll b content decreased significantly at ≥20 mg·L−1 (by 14.09%, 10.79%, and 18.48% at 20, 30, and 40 mg·L−1, respectively), while carotenoid content increased. Malondialdehyde content and activities of superoxide dismutase, peroxidase, and catalase increased with PbO NPs concentration, indicating oxidative stress. Lead accumulation reached 1265.65 mg·kg−1 at 30 mg·L−1 and 2030.01 mg·kg−1 at 40 mg·L−1, with bioconcentration factors >1 and lead removal rates above 68.94%. Subcellular distribution showed lead predominantly in the cell wall fraction, followed by soluble components and organelles. These findings demonstrate that L. punctata exhibits strong PbO NPs accumulation and stress tolerance, supporting its use in phytoremediation of metal nanoparticle-contaminated waters.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508021
Coal chemical industry waste salt, generated from high-salinity wastewater treatment, poses a bottleneck for green transformation under the 'dual carbon' strategy due to its low value and high complexity. This study investigated a typical coal chemical industrial park in Northwest China, using principal component analysis (PCA) on actual waste salt samples to identify pollutant characteristics and assess resource utilization potential. Results showed total organic carbon (TOC) ranged from 707.9 to 7,737.9 mg·kg⁻¹, with benzo(a)pyrene concentrations frequently exceeding the limits of the 'Identification Standards for Hazardous Wastes' (GB 5085.3). Hardness ions and metal ions also surpassed relevant product standards. PCA classified the waste salts into three types: sodium sulfate type, sodium chloride type, and high-complexity mixed salt, each corresponding to distinct resource utilization pathways. The study proposes differentiated technical routes based on PCA classification, providing a feasible reference for classified management and technology selection. This research supports the national policy of 'harmless pretreatment + resource utilization' for waste salt, contributing to green and high-quality development of the coal chemical industry.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010608
This study investigated the occurrence and distribution of 27 per- and polyfluoroalkyl substances (PFAS) in surface water and sediment of the Fuchun River, a tributary of the Qiantang River Basin. Surface water samples were analyzed using ultra-performance liquid chromatography coupled with high-resolution mass spectrometry. Total PFAS concentrations (∑PFAS) in surface water ranged from 30.04 to 105.26 ng/L, with mean and median values of 59.64 ng/L and 51.43 ng/L, respectively. The dominant compounds were perfluorooctanoic acid (PFOA), hexafluoropropylene oxide dimer acid (GenX), and perfluorobutanoic acid (PFBA). Concentrations generally decreased from upstream to downstream, consistent with previous studies. Notably, GenX levels were significantly elevated compared to earlier reports. In sediment, ∑PFAS concentrations ranged from not detected (ND) to 0.59 ng/g dry weight, with mean and median values of 0.14 ng/g and 0.11 ng/g, respectively. PFOA and perfluorooctanesulfonic acid (PFOS) were the primary sediment contaminants. Source apportionment indicated that industrial wastewater discharge and sewage treatment plant effluents were the main sources of PFAS in the river. Risk assessment using risk quotients suggested low ecological risks to aquatic organisms for most detected PFAS. However, the presence of short-chain and novel PFAS warrants further investigation due to potential unknown risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010803
Global aquaculture is expanding rapidly, with China leading in production and being the only country where aquaculture output exceeds wild catch. This growth raises concerns about environmental contamination, particularly mercury (Hg), and the safety of aquaculture products. This study investigated Hg accumulation and trophic transfer in a typical ecological mariculture area in Tangshan, Hebei Province, by measuring species-specific Hg concentrations in sediments and various aquatic organisms. Sediment total mercury (THg) levels were extremely low, averaging 4.0 ± 1.3 ng·g−1 dry weight (n=56), attributed to sandy/silty sediments with low adsorption capacity and minimal external/internal Hg inputs. In aquaculture fish, muscle THg and methylmercury (MeHg) concentrations were 59.7 ± 30.0 and 53.8 ± 29.2 ng·g−1 wet weight (n=7), respectively, comparable to wild fish from the same area. This is due to efficient trophic transfer and biomagnification of Hg, especially MeHg, along the food chain, influenced by food chain structure, primary consumer accumulation, and metabolic rates. At three seafood consumption levels (41.6–255.6 g·d−1), estimated daily intakes (EDI) of MeHg for Chinese adults ranged from 0.01 to 0.40 μg·kg−1·d−1, with target hazard quotients (THQ) from 0.13 to 3.98. Except for Penaeus monodon and Metapenaeus ensis, all other aquaculture products at high consumption levels exceeded the USEPA safety threshold for MeHg EDI and had THQ > 1, indicating potential health risks.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605010
The underwater light environment is a critical limiting factor for the colonization of submerged macrophytes and the ecological restoration of shallow lakes. Previous studies rarely quantified the contribution of aquatic environmental factors to the water quality–underwater light–macrophyte relationship, nor did they comprehensively consider factor correlations or establish thresholds for macrophyte colonization. This study, conducted in a typical national wetland nature reserve (Hongze Lake), measured photosynthetically active radiation, light attenuation coefficient (Kd), euphotic depth (Zeu), water transparency (SD), total suspended solids (TSS), chlorophyll-a (Chl-a), total nitrogen (TN), and total phosphorus (TP). A simulation model for Kd was developed, spatial distributions of environmental factors were analyzed, and contribution rates to light attenuation were quantified. Results showed that the mean Kd was 10.31±3.76 m⁻¹, and the mean Zeu (0.53±0.24 m) was lower than the mean water depth (0.94±0.29 m), with a spatial pattern of shallower Zeu in the west and deeper in the east. TSS and Chl-a were the primary direct influencing factors, while TN acted mainly indirectly. To achieve effective macrophyte colonization under average water depth conditions, thresholds were determined: Zeu ≥ 0.94 m, SD ≥ 0.41 m, Kd ≤ 4.95 m⁻¹, and Chl-a ≤ 3.8 μg/L. These findings provide quantitative guidance for lake restoration and water quality management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605009
Reservoir CO2 emissions are a critical component of the global carbon cycle, yet existing prediction models often neglect reservoir size stratification, mixing data from large, medium, and small reservoirs. This study addresses this gap by constructing a training dataset exclusively for large and medium reservoirs in China and developing a neural network-based CO2 flux prediction model. The model revealed significant latitudinal zonation, with CO2 fluxes in southern low-latitude basins (e.g., Yangtze, Pearl) substantially higher than in northern high-latitude basins (e.g., Yellow, Songliao). Statistical analysis identified total phosphorus (TP) content as the strongest driver, exhibiting a positive exponential correlation with CO2 flux (p < 0.01). Reservoir age and latitude showed significant negative correlations, while physical parameters such as reservoir area, pre-impoundment submersion ratio, and average water depth showed no significant national-scale correlation. The study underscores the heterogeneity of dominant drivers across basins and proposes differentiated carbon mitigation strategies: for southern high-emission basins, controlling phosphorus inputs through wastewater treatment and restricting aquaculture; for northern basins, enhancing soil conservation to reduce carbon-rich sediment influx; and for new reservoirs, implementing vegetation clearance before impoundment and optimizing flood discharge schedules. These findings provide a theoretical basis for carbon emission characterization and support low-carbon management of large and medium reservoirs in China.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605014
Chlorinated aliphatic hydrocarbons (CAHs) are prevalent groundwater contaminants at industrial sites in China. This pilot-scale study evaluated in-situ anaerobic bioremediation of CAHs-contaminated groundwater in a low-permeability bedrock fracture zone at depths up to 40 m. A self-developed anaerobic dechlorinating culture (BS-1), containing Dehalococcoides, Desulfitobacterium, and Dehalogenimonas, was injected alongside carbon sources (sodium citrate and emulsified vegetable oil) and nutrients. Pressurized nitrogen gas injection enhanced the distribution of amendments, achieving a radius of influence of 5.0 m. Over 399 days of monitoring, the combined use of slow-release and soluble carbon sources maintained anaerobic conditions (ORP < -100 mV) for over one year, providing sustained electron donors. The emulsified vegetable oil reduced injection frequency and operational costs. The BS-1 culture effectively dechlorinated vinyl chloride, cis-1,2-dichloroethylene, trichloroethylene, and chloroform, achieving removal efficiencies exceeding 95%. At times, groundwater quality met the Class IV standard of GB/T 14848-2017. This study demonstrates a green, economical, and effective solution for CAH-contaminated site remediation, with significant engineering application potential.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605016
BiOX (X=Cl, Br, I) photocatalytic materials were synthesized via a chemical precipitation method. Their structures and properties were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption-desorption, and ultraviolet-visible diffuse reflectance spectroscopy. Results showed that BiOBr exhibits a flower-like nanomicrosphere structure composed of nanosheets, providing a more three-dimensional morphology, larger specific surface area, and moderate light absorption range, resulting in superior visible light absorption. Consequently, BiOBr demonstrated the best photocatalytic degradation of NO under xenon lamp irradiation. The study further investigated the effects of light intensity, NO flow rate, and oxygen presence on the NO degradation performance of BiOBr. Optimal NO removal rate of 58% was achieved under conditions of a light source distance of 15 cm, NO flow rate of 15 mL/min, and in the presence of oxygen. The degradation rate constant for BiOBr was 11×10⁻⁴ min⁻¹, significantly higher than that of BiOCl and BiOI. BiOBr also exhibited good reusability and stability. These findings provide an important experimental basis for the application of BiOBr in the photocatalytic degradation of NO.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4046-6
The deliberate control of framework dimensionality represents a powerful yet underexplored strategy for tailoring the functionality of homochiral metal-organic frameworks (HMOFs). Herein, we report a logical dimensional evolution from 1D and 2D to 3D HMOFs, achieved by tuning the connectivity of the auxiliary ligand. Employing a planar, three-connected ligand, 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine (Tpt), together with enantiopure tetracarboxylate of cyclohexane diamide linkers ((1R,2R/1S,2S)-cyclohexane-1,2-dicarbonyl bis(azanediyl)diisophthalate) (R,R/S,S-CHCAIP) and Zn2+ salts, a pair of 3D porous HMOFs (P/M-HMOF-5) was successfully constructed. The 3D framework features unique heart-shaped channels and a novel 4-(3,3,3,6)-connected topology. Structural analyses reveal trinuclear Zn3(μ3-O) clusters that, upon activation, generate open metal sites. These Lewis acid sites, synergizing with Lewis basic sites from the framework, confer efficient acid-base bifunctional heterogeneous catalysis for the synthesis of 2,3-dihydroquinazolinones in excellent yields (90%–98%). Furthermore, P/M-HMOF-5 serve as highly sensitive and enantioselective fluorescent sensors for amino acids and α-hydroxy carboxylic acids, with the highest discrimination observed for phenylalanine (KBH(D-Phe)/KBH(L-Phe) = 5.85 for M-HMOF-5). This work demonstrates how rational ligand connectivity steers dimensional evolution, enabling the integration of distinct catalytic and sensing functions within a single chiral platform, thereby providing a blueprint for the design of advanced multifunctional materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3834-x
Lithium metal anodes face critical barriers to practical application due to dendritic growth and interfacial instability, which cause short cycle life and safety hazards. This work introduces a highly stable and ultrahigh-rate lithium metal anode using a lithiophilic Sm2S3-modified carbonaceous host. The in situ formation of a Li2S-reinforced interphase layer enables highly reversible lithium plating/stripping and uniform deposition. The modified anode achieves an ultrahigh rate capability of 20 mA cm−2 and ultralong cycling stability of 7440 cycles with dendrite-free morphology. In a 4.5 V anode-less Li||LiCoO2 cell with an areal capacity of ~1.93 mA h cm−2, the system sustains over 1100 cycles with 87.2% capacity retention under harsh conditions: an ultralow negative-to-positive capacity ratio (N/P) of ~0.26 and lean electrolyte of ~5 g Ah−1. Furthermore, an anode-less pouch cell with an ultrahigh areal capacity of ~6.01 mA h cm−2 delivers superior cycling performance even at an ultra-low N/P ratio of ~0.71 and ultra-lean electrolyte of ~1 g Ah−1, achieving a high energy density of 505 Wh kg−1. This work provides a scalable and effective strategy for advancing reliable, practical lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3818-4
The electrocatalytic reduction of carbon dioxide (CO2RR) to multi-carbon (C2+) products is of significant interest due to its implications for chemical manufacturing and carbon neutrality. However, the competitive hydrogen evolution reaction (HER) and sluggish C–C coupling kinetics impede selectivity at industrial current densities. Here, we report an interfacial nanoconfinement strategy using N-(2-acetamido)iminodiacetic acid (ADA) to engineer a series of capping layer-covered Cu catalysts (Cu@ADA-x). A volcano-type correlation between capping layer thickness and C2+ selectivity is observed. The optimized Cu@ADA-m catalyst achieves a maximum Faradaic efficiency for C2+ products (FE C2+) of 86.8% and maintains over 80% of its initial FE C2+ after 42 hours at 200 mA cm−2, with an energy efficiency of 38.5%. In-situ Raman spectroscopy and density functional theory (DFT) calculations reveal that the capping architecture stabilizes metastable Cu species and optimizes gas adsorption, enhancing *CO intermediate utilization and lowering C–C coupling energy barriers. This work provides a catalyst design principle for industrial-scale carbon-neutral electrochemical production of multi-carbon products.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3826-9
Cyclic molecular architectures offer unparalleled functional diversity and assembly advantages, holding significant promise for applications in nanomedicine. Here, we propose a cyclic molecular engineering strategy designed to address the hydrophobicity of organic dyes while simultaneously enhancing their phototherapeutic efficacy. Through esterification of the boron dipyrromethene (BDP) core with adipic acid (CB-c) or dithiodiacetic acid (CB-s), we developed self-assembling nanoparticles (NPs) with exceptional colloidal stability (>60 d) and microenvironment-responsive dissociation. CB-s NPs exhibited unique antiparallel dimeric packing in crystallographic studies, enabling robust H-aggregation. The redox-sensitive disulfide bonds in CB-s NPs conferred tumor-selective disassembly (90% dissociation within 30 h), facilitating spatiotemporally controlled therapeutic activation. In vivo studies demonstrated superior synergistic photodynamic/photothermal therapy (PDT/PTT) efficacy, achieving 92% tumor suppression. This work establishes cyclic architecture-driven supramolecular organization as a paradigm-shifting approach for developing multifunctional nanomaterials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021401
This study investigated the occurrence, distribution, sources, and ecological risks of 19 organophosphate triesters (OPEs) and 8 diesters (di-OPEs) in surface water and sediments from the Hangzhou section of the Qiantang River. Samples were analyzed using liquid chromatography-high resolution mass spectrometry. Concentrations of ΣOPEs in water ranged from 31.5 to 98.9 ng/L, and in sediments from 10.8 to 341 ng/g dry weight (dw). Σdi-OPEs ranged from 2.19 to 104 ng/L in water and 0.437 to 106 ng/g dw in sediments, indicating moderate to low contamination. TCIPP and TCEP dominated OPEs in water, while TEHP was the predominant OPE in sediments. DBP was the major di-OPE in water, and DPHP in sediments. Source apportionment via correlation and principal component analysis identified industrial production and human activities, including household, tire, plastic manufacturing, and agricultural practices, as primary sources. Ecological risk assessment revealed negligible risks for most OPEs in water, but notable risks in sediments: TEHP and EHDPP posed risks to crustaceans, and TPHP to algae. Moreover, combined toxicity at multiple sediment sampling sites raised concern, warranting further attention.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022501
The pretreatment of trace emerging contaminants in environmental matrices is challenging due to diverse methods and uncertain applicability. This study compared solid-phase extraction (SPE) and liquid-liquid extraction (LLE) for extracting endocrine-disrupting compounds (EDCs), particularly phthalate esters (PAEs), using laboratory-spiked blank samples. LLE achieved satisfactory recoveries for PAEs at spike levels below 4 μg·L−1, enabling detection of five PAEs including diisodecyl phthalate (DIDP), with improved efficiency via repeated extraction. SPE offered lower detection and quantification limits, higher accuracy and sensitivity, and achieved high recoveries for 12 EDCs and 10 antibiotics at spike levels ≥0.2 μg·L−1, with detection limits as low as 0.1–6.4 ng·L−1. The developed SPE coupled with liquid chromatography-Orbitrap mass spectrometry (LC-Orbitrap MS) method was applied to industrial wastewater samples. Across five industrial sectors (coatings, rubber, pharmaceuticals, inks, and materials technology), five antibiotics and ten EDCs were detected, with total concentrations ranging from 0.03–0.56 μg·L−1 and 0.07–1.91 μg·L−1, respectively. Sector-specific profiles emerged: rubber industry effluent was dominated by dibutyl phthalate (DBP) at 1.07 μg·L−1, while pharmaceutical effluent featured sulfamonomethoxine (SMM) at 0.34 μg·L−1. This systematic evaluation demonstrates that SPE-LC-Orbitrap MS is robust for complex matrices, providing a technical foundation for accurate quantification of emerging contaminants in industrial wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3886-1
Organic-inorganic hybrid Mn(II) halides have attracted considerable attention for optoelectronic applications due to their environmental friendliness and high photoluminescence quantum yield (PLQY) originating from the d-d transition (4T1(G) → 6A1) of Mn2+. However, complex synthesis processes restrict their potential for low-cost, large-scale production. In this study, the Mn(II) halide (C22H22O2P)2MnBr4 was synthesized via a simple and efficient mechanochemical ball-milling approach, achieving high photoluminescence efficiency and production yield. The halide exhibits intense green emission centered at 520 nm with a PLQY of up to 96.1%. Combined experimental and theoretical characterizations confirm that the strong light emission originates from the synergistic interaction between organic cations and inorganic framework components. A white light-emitting diode (WLED) device based on (C22H22O2P)2MnBr4 was fabricated, exhibiting bright white light emission and a wide color gamut of 113% NTSC. Furthermore, a scintillation screen based on (C22H22O2P)2MnBr4 was fabricated and utilized to investigate internal structures of various objects. The screen demonstrates a high relative light yield of 70546 photons MeV−1, a low detection limit of 33.8 nGy air s−1, and a spatial resolution of up to 12.36 lp mm−1. Finally, by integrating the scintillation screen with a thin-film transistor (TFT) backplane, the resulting X-ray detector successfully enables simulated medical imaging of dental caries. This work establishes a robust foundation for large-scale synthesis of highly efficient luminescent Mn(II) halides and highlights their potential in multifunctional light-emitting applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3842-8
The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510081
Electrochemical two-electron oxygen reduction (2e−ORR) for hydrogen peroxide (H2O2) synthesis faces challenges of low cathodic catalytic efficiency and complex catalyst preparation. This study prepared nitrogen-vacancy (Nv) rich carbon nitride via one-step pyrolysis, composited with carbon nanotubes (CNT), and loaded onto graphite felt (GF) to fabricate a non-precious metal gas diffusion electrode Nv-C3N4-CNT/GF. The electrode exhibited a three-dimensional fibrous skeleton with interconnected micro-nano hierarchical pores, facilitating efficient electron transport. Electrochemical impedance spectroscopy revealed a low charge transfer resistance of 13.26 Ω, indicating superior electrocatalytic activity and charge transfer efficiency. Single-factor experiments and response surface methodology (RSM) optimization determined optimal conditions: calcination temperature 300 °C, catalyst mass ratio 3:1, Nv-C3N4-CNT loading 0.1 g, current density 40 mA·cm−2, pH 7, and aeration rate 0.1 L·min−1. Under these conditions, H2O2 accumulation reached 1622.73 mg·L−1 after 90 min, which was 1.3 and 1.5 times higher than g-C3N4-CNT/GF and CNT/GF electrodes, respectively. Stability tests showed that after 6 cycles, H2O2 production remained at 1400.52 mg·L−1, and within 960 min, the maximum production reached 2014.04 mg·L−1 with a highest Faradaic efficiency of 54.86%. These results demonstrate the electrode's potential for cyclic use. This study provides a new approach for developing efficient, low-cost electrodes for electrosynthesis of H2O2, offering a reference for green H2O2 production.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021301
Lithium cobalt oxide (LCO) nanoparticles (NPs), generated during the lifecycle of LCO batteries via mechanical wear, pose respiratory health risks. This study systematically assessed LCO NPs' physicochemical properties, ion release, and immunotoxicity using multi-scale models. LCO NPs exhibited irregular morphology, layered crystal structure, good dispersion, and negative surface charge. Cobalt ion release was minimal: 1.03% in deionized water and 0.11% in cell culture medium. In vitro, LCO NPs significantly induced reactive oxygen species (ROS) production and secretion of pro-inflammatory cytokines (IL-6, IL-1β, TNF-α) in macrophages, promoting M1 polarization. In vivo, intranasal exposure caused dose-dependent pulmonary accumulation, alveolar destruction, inflammatory cell infiltration, and elevated cytokines in bronchoalveolar lavage fluid (BALF). Transcriptomic analysis revealed significant enrichment of NF-κB, JAK-STAT, and Toll-like receptor signaling pathways, implicating these in macrophage activation and inflammation amplification. This multi-level study elucidates LCO NPs' immunotoxicity mechanisms, providing a scientific basis for environmental health risk assessment and management of lithium-ion battery materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607002
In municipal solid waste (MSW) incineration simulation, the traditional FLIC-Fluent coupling method suffers from long iteration cycles across multiple operating conditions and significant errors due to data mapping at the coupling interface. This study developed a fully coupled bed combustion simulation program based on Fluent User-Defined Functions (UDF). By integrating four modules—dynamic regulation of particle emissivity, zonal motion control of the grate, bed drag shielding, and wall collision-induced fragmentation—the program achieved fully coupled calculation of solid waste particle movement, bed combustion, and furnace flow fields within a single Fluent platform, completely replacing the bed calculation functions of FLIC software. A 750 t/d reverse-inclined forward-feeding grate furnace in a Chinese waste-to-energy plant was selected for engineering validation. The model was calibrated using continuous operational data from 12 on-site measurement points. Results showed that the computational time per operating condition was reduced by 71.4% compared to the traditional FLIC-Fluent coupling method. The relative error between simulated furnace temperatures and on-site measurements was ≤4.10%, significantly outperforming the 9.68% maximum relative error of the traditional method. The proposed method provides a reliable engineering simulation solution for optimizing operating conditions and screening blending schemes in co-incineration of multi-source solid waste.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3941-2
The precise and directed assembly of multicomponent aggregates remains a central challenge in materials chemistry, particularly the integration of neutral clusters. This study introduces a 'cation-mediated co-crystallization' strategy to overcome electrostatic assembly barriers between neutral aluminum molecular rings and polyoxometalates (POMs). By controllably functionalizing the rings with cationic moieties, the approach bypasses traditional 'ion-pair' limitations, enabling incorporation of diverse neutral clusters. The strategy exhibits structural extensibility, with cationic sites adjustable on ring exteriors or interiors, and potential extension to various polyanionic systems. The resulting hybrid materials demonstrate outstanding solution processability. When incorporated as dielectric dopants in a polymer matrix, they achieve a synergistic '1+1>2' effect: aluminum rings contribute high capacitance density (~11.19) and low dielectric loss (~0.03), while POMs provide high breakdown strength (~740 MV m−1). This work establishes a paradigm for directed macroscopic functional assembly via molecular-level cluster interaction 'encoding'.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3921-2
Moisture-enabled energy harvesting technologies offer a promising route for self-powered strain sensing, yet conventional generators suffer from slow response, poor recovery, and limited multidirectional resolution. Here, we report a stretchable thermoplastic polyurethane (TPU) nanofiber moisture-enabled electric generator (MEG) with highly aligned ion channels. A carbon black/sodium dodecylbenzene sulfonate (CB/SDBS) layer is coated on the TPU membrane, while carboxymethyl cellulose (CMC) and acidified poly(sodium 4-styrenesulfonate) (HPSS) are applied on opposite sides, establishing lateral hydrophilicity and ion gradients to drive directional ion migration. The planar MEG is lightweight, flexible, and requires no fully covered electrodes, enabling conformity to complex deformations. The aligned channels reduce ion migration tortuosity, enhancing ion transport efficiency and flux. As a result, the aligned MEG (ATMEG) delivers 0.2 V and 0.51 μA cm−2 at ~90% relative humidity, corresponding to 400% and 287% enhancements compared with the unaligned MEG (UATMEG). The ATMEG also exhibits ultrafast response (0.16 s) and recovery (0.08 s). Utilizing its anisotropic characteristics, a multidirectional self-powered strain sensor is developed, capable of distinguishing both the amplitude and direction of human motion, demonstrating strong potential for adaptive wearable electronics and intelligent motion monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4000-1
Formamidine lead-based perovskites (FAPbI3) exhibit significant potential in optoelectronic applications. Nevertheless, they encounter challenges related to δ-phase instability and reliance on toxic solvents. In this study, we present a green solvent-additive synergy strategy that employs γ-valerolactone (GVL) in conjunction with reductive acids like oxalic acid (OA), to stabilize α-FAPbI3 single crystals (SCs). GVL enhances the stability of the precursors through the formation of FA+-GVL hydrogen bonds and high-valence [PbIx]2−x clusters, resulting in ambient-stable α-phase SCs, yielding a marked improvement in stability compared to SCs prepared with the toxic solvent γ-butyrolactone (GBL). Additive modulation demonstrates that H+ and reductive groups play a critical role in regulating crystallization, suppressing the δ-phase by promoting FA+ dissociation and inhibiting MA+ deprotonation. A solvent-involved intermediate, δ-FAPbI3-GVL, has been identified; this intermediate evolves into α-FAPbI3 at a low temperature of 60 °C, thereby reducing the energy barriers associated with the α to δ phase transition. In contrast, non-reductive acids and reductive ionic liquids do not inhibit δ-phase formation, with the latter even promoting the crystallization of pure δ-FAPbI3. By utilizing low-volatility OA as an additive, optimized FA0.9MA0.1PbI3 single crystal thin films exhibit a low defect density of 8.3 × 10^11 cm−3. Subsequently, a photodetector was fabricated. Under zero bias voltage and 780 nm illumination, the device exhibited a responsivity of 14.5 mA/W, a detectivity of 3.75 × 10^10 Jones, and a response speed of 149/65 μs. Moreover, without any encapsulation, the device’s performance diminished by only 17% after 30 days of storage in ambient conditions, indicating remarkable stability.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512059
Recovery of palladium from Pd-bearing wastewater is economically and environmentally significant. Adsorption is a promising method due to its simplicity, low cost, and high efficiency. In this study, a novel thiol-modified adsorbent (CHT-SH) was synthesized via one-step functionalization of inexpensive chitin (CHT) with thioglycolic acid. At room temperature and pH=2, CHT-SH exhibited an experimental adsorption capacity of 223.67 mg·g−1 for Pd(II), which was approximately 7 times higher than that of pristine CHT (30.6 mg·g−1). Kinetic and isotherm studies indicated that the adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model, with a maximum theoretical adsorption capacity of 248.89 mg·g−1, suggesting monolayer chemisorption. Characterization (FTIR, SEM, XPS, XRD) and density functional theory (DFT) calculations revealed that the adsorption mechanism primarily involved synergistic coordination of nitrogen and sulfur atoms, along with electrostatic interactions. Furthermore, CHT-SH demonstrated good reusability, retaining stable adsorption capacity after five adsorption-desorption cycles. Compared to other adsorbents that rely on redox mechanisms and are costly, CHT-SH offers comprehensive advantages. This work provides a cost-effective and efficient adsorbent for Pd(II) recovery from wastewater, offering technical support and theoretical reference for practical applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042702
This study estimated initial volume mixing ratios of volatile organic compounds (VOCs) in Dalian from June 1 to August 31, 2024, using a photochemical age-based parameterization method, and performed source apportionment with positive matrix factorization (PMF). Observed average TVOCs concentration was 12.49×10⁻⁹, comprising alkanes (84.2%), alkenes (10.4%), and aromatics (5.4%). Corrected initial TVOCs was 14.93×10⁻⁹, indicating a loss rate of 16.4%. Loss rates were highest for alkenes (53.2%), followed by aromatics (23.3%) and alkanes (6.8%). Ozone formation potential (OFP) averaged 21.31×10⁻⁹ (observed) and 38.75×10⁻⁹ (initial), with an OFP loss rate of 45.0%, distributed as alkenes (56.4%), aromatics (32.7%), and alkanes (10.3%). During ozone pollution episodes, TVOCs chemical loss was 1.9 times that of non-pollution periods, with alkene loss reaching 61.6%; OFP loss was 1.2 times higher, with alkenes contributing 88.4% to TVOCs loss. Secondary organic aerosol (SOA) formation potential from 08:00–17:00 was 1.51×10⁻¹ μg·m⁻³, with 99.4% from aromatics and toluene contributing 68.3%. PMF identified five sources: motor vehicles (49.6%), oil and gas volatilization (20.7%), petrochemical enterprises (12.6%), industrial processes (11.2%), and solvent use (5.9%). OFP modeling indicated motor vehicles contributed most to ozone formation (41.1%), followed by petrochemical enterprises (35.8%). During ozone pollution, PMF based on initial concentrations showed petrochemical sources had the highest OFP contribution (42.5%), whereas observed concentrations indicated motor vehicles as the top contributor (42.5%). This discrepancy underscores the necessity of correcting for photochemical losses in source apportionment studies.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608007
The Minjiang River Basin, subjected to combined pollution from domestic, agricultural, and industrial sources, has become a typical sensitive area for studying the environmental behavior of emerging contaminants such as antibiotics. This study conducted a cross-year comparative analysis of the composition and concentrations of antibiotics in water samples from nine sampling sites during the dry season in November 2022 and 2024. The findings revealed: 1) After the implementation of the "National Action Plan for Reducing Antimicrobial Use in Livestock", the detection concentrations of tetracycline antibiotics (TCs) decreased (e.g., doxycycline concentrations dropped from 7.75 ng/L to undetectable levels), and the mixed risk quotient (MRQ) across the entire basin transitioned from medium to low risk. However, lincomycin (up to 4.6 ng/L), clarithromycin (1.3 ng/L), and florfenicol (0.6 ng/L) have emerged, indicating an increasing hidden ecological risk from substitution. 2) High-concentration antibiotic zones transferred from urban residential areas in 2022 to intensive aquaculture zones and upstream reservoir areas in 2024. The reduction in dry-season water flow intensified pollutant accumulation, synergistically enhancing the effects of tidal drag. Additionally, the conversion of agricultural land to aquaculture ponds led to increased use of alternative drugs (e.g., sulfamethazine), while policy interventions mitigated the exacerbation of urban antibiotic pollution by construction land. This study elucidates the migration patterns of antibiotic pollution under the synergistic effects of policy regulation and natural processes, emphasizing the need to address hidden risks of substitute drugs and the driving role of land-use changes, providing scientific basis for watershed-scale risk assessment and precise management of emerging pollutants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4063-2
Quantum dot light-emitting diodes (QLEDs) are emerging as a leader in next-generation display technology. In principle, the efficiency of QLEDs is highly reliant on the radiative recombination rate of injected electrons and holes in the QD emissive layer. Within a solitary light-emitting cycle, a pre-negative-charged QD bursts into a fleeting sparkle upon encountering a hole, much like a lighted piston within a roaring engine. More pistons bring higher horsepower. The challenge of achieving highly efficient QLED lies in how to increase the number of pre-negatively charged QDs. To address these limitations, we developed a ZnO@ZnMgO core-shell nanoparticle (NP)-based electron transport layer (ETL). This design synergistically combines the high conductivity of ZnO core and the low defect density of the ZnMgO shell. Measured by electron-excited transient absorption, the average electron population (<N_e>) in the emissive layer for ZnO@ZnMgO and ZnMgO-based QLEDs was 0.61 and 0.33 at 4 V, respectively, which greatly increases the carrier recombination efficiency. As a result, green QLEDs achieve a peak EQE of 30.66%, maximum luminance of 1,615,039.85 cd/m2, and a low turn-on voltage of approximately 2 V. The T95 operational lifetime exceeded 29,000 h at 1,000 cd/m2. Currently, all parameters are at the top level within the QLED region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3974-1
MAB-phase-derived compounds exhibit promising electromagnetic wave (EMW) absorption properties due to their unique layered structure and desirable physicochemical characteristics. Among them, Cr2AlB2 is particularly attractive owing to its excellent thermal and electrical conductivity. However, conventional synthesis of Cr2AlB2 requires inert gas protection to prevent oxidation, significantly increasing production costs and limiting its application in EMW absorption. To overcome this bottleneck, we report the successful synthesis of high-purity Cr2AlB2 in ambient air using the molten salt shielded synthesis (MS3) method. This approach not only isolates the material from oxygen interference but also reduces the synthesis temperature, offering a cost-effective and scalable route. The as-synthesized Cr2AlB2 exhibits outstanding EMW absorption performance: a minimum reflection loss (RLmin) of -42.10 dB at 12.6 GHz and a maximum effective absorption bandwidth (EABmax) of 3.44 GHz at a thickness of 1.9 mm. This work not only facilitates the large-scale production of Cr2AlB2 but also provides critical insights into its practical application as a high-performance EMW absorber.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4059-3
Deuterium (D2) is indispensable for isotope tracing, neutron scattering, and fusion reactions, yet its separation from hydrogen (H2) remains challenging due to their nearly identical physicochemical properties. Adsorptive separation exploiting the kinetic quantum sieving (KQS) effect at cryogenic temperatures offers a promising route, but demands precise pore engineering. Here, we report a biomass-derived carbon molecular sieve that permits rapid D2 transport while imposing a significant diffusion barrier for H2, enabling effective separation from D2/H2 mixtures. The molecular sieving micropores are generated by transforming cellulose components into slit-type carbon micropores, with lignin acting as a pore-size modifier. At 77 K, the diffusion rate of D2 is 1.8 times that of H2, leading to a D2 concentration in the recovered gas approximately 10% higher than that achieved with conventional microporous carbons. Aspen adsorption simulations demonstrate that D2 can be enriched to 90.1% from a 1.0% D2/H2 mixture within 12 successive cycles following a two-bed cryogenic pressure swing adsorption process. These findings advance the development of effective adsorbents for kinetic D2/H2 separation, offering a sustainable, low-cost route to deuterium enrichment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4044-3
Efficient sequestration of radioactive iodine species (I2, CH3I, I3−) is vital for nuclear safety and environmental protection. However, developing multifunctional adsorbents that remain effective under diverse conditions remains a significant challenge. Herein, we report two functionalized PD-COFs (PD-WS and PD-WY) with moderate crystallinity, outstanding thermal stability, and robust chemical resistance. They exhibit superior adsorption performance in both gas and liquid phases. Specifically, at 75°C, PD-WY achieves capacities of 4.88 g g−1 for I2, 1.55 g g−1 for CH3I, and 5.55 g g−1 for the I2/CH3I mixture, while high capacities are also retained at room temperature. In solution, PD-WY adsorbs up to 3.56 g g−1 of I3− in water and 2.00 g g−1 of iodine in cyclohexane. These COFs display rapid kinetics (K80% = 3.25 g g−1 h−1 for I2 and 7.89 g g−1 h−1 for I3−) and excellent selectivity. Mechanistic studies indicated that the excellent iodine affinity of PD-COFs arises from their rich electronic structures, abundant active sites, and charge transfer interactions. These findings position PD-COFs as highly promising adsorbents for nuclear waste treatment and environmental remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4058-4
Bacterial infection following endometrial injury delays tissue regeneration and may progress to endometritis and other reproductive disorders. Photodynamic therapy (PDT) offers a promising antibacterial strategy in the post-antibiotic era, yet its efficacy is often limited by rapid recombination of photogenerated charge carriers and poor penetration of visible excitation light. Here, we report a previously unexplored upconversion-mediated, Type I dominant photodynamic antibacterial uterine scaffold specifically designed for infection-associated endometrial injury. The core innovation is the construction of a Schottky Ag0-Ag2S heterojunction on NaYF4:Yb,Tm nanoparticles using ZIF-8 as a sacrificial precursor, enabling efficient charge separation and oxygen-independent hydroxyl radical generation, overcoming the oxygen dependence of conventional Type II PDT under hypoxic uterine conditions. The upconversion core permits deep-tissue-penetrable near-infrared (NIR) activation. Beyond instantaneous PDT, dynamic release of Ag+ ions provides synergistic bactericidal activity, enabling spatiotemporally coordinated biofilm disruption. These nanostructures were incorporated into patient-customizable, biodegradable poly(L-lactic acid) (PLLA) scaffolds fabricated by selective laser sintering, achieving simultaneous antibacterial therapy and endometrial regeneration in a single platform. This integration of an oxygen-independent PDT mechanism, MOF-templated heterojunction engineering, and 3D printed personalized uterine implants constitutes a comprehensive therapeutic strategy not previously reported for treating infection and endometrial injury.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4052-0
Cutaneous wound infections affect millions of patients annually worldwide, and early diagnosis is critical for timely anti-infection treatment. Bacterial infections alter wound pH, offering a promising diagnostic approach. Here, a diagnostic smart dressing (CMC-PDBI) is developed by ultraviolet-initiated crosslinking of a pH-responsive indicator coating, incorporating modified bromothymol blue, onto a carboxymethyl cellulose substrate. The dressing exhibits superior pH-triggered color-changing performance in both phosphate buffer solution and bacterial cultures across the pH range associated with wound infection (orange at pH 6.0, green from pH 6.5 to 7.5, blue at pH 8.0). In a murine wound infection model, CMC-PDBI indicates infection two days before symptomatic manifestation. Early therapy guided by the dressing accelerates wound healing and reduces inflammation. A smartphone application (InfectSense) assists in identifying infection risk. This work presents a novel early-warning platform for qualitative visual diagnosis of wound infections before clinical symptom onset, with high potential for clinical and home care settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4074-6
Achieving carbon neutralization relies heavily on green hydrogen and electrochemical carbon-nitrogen cycles. However, the complexity of these systems and the cost of traditional Edisonian trial-and-error methods hinder rapid progress. Artificial intelligence (AI) has emerged as a transformative tool, enabling high-throughput data processing and dynamic adaptation. This review surveys the landscape of AI-driven electrochemistry, bridging the gap from atomic-scale design to industrial-scale implementation. Specifically, we focus on three areas: atomic structure-function decoding, fully automated “self-driving” laboratories, and macro-scale simulations for device durability. Furthermore, we elucidate the critical challenges in integrating AI with materials science. By mapping current trends and future directions, this work aims to unlock the full transformative potential of AI in next-generation energy storage and conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4099-2
Lithium (Li)-metal batteries (LMBs) are promising next-generation energy storage systems due to their high theoretical capacity (3860 mAh g−1) and low electrochemical potential (−3.04 V vs. standard hydrogen electrode). However, uncontrollable Li dendrite growth and volume fluctuations during cycling cause low Coulombic efficiency, safety hazards, and rapid capacity decay. Conventional 3D current collectors mitigate these issues by increasing surface area and providing void space, but they suffer from top-heavy deposition and underutilization of internal space. Emerging Janus/gradient anode structures, featuring asymmetric or gradient properties in lithiophilicity, conductivity, or porosity, enable bottom-up Li plating and efficient space utilization. This review systematically summarizes design principles, operational mechanisms, and recent progress in lithiophilic-lithiophobic Janus designs, conductivity-gradient frameworks, and dual-gradient configurations. These structures collectively improve Coulombic efficiency, cyclic longevity, and safety. The review concludes with future research directions, underscoring the potential of Janus/gradient anodes for high-energy-density and durable LMBs.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60686-X
This study reports a streamlined route for synthesizing plate-like α-Al2O3 via co-combustion activation of coal gangue and corn stalk, enabling high-value utilization of solid wastes. The introduction of corn stalk significantly reduces the apparent activation energy of coal gangue combustion and increases the acid leaching yield of aluminum to 81.9%. Mechanism analysis reveals that titanium and iron ions in the co-combustion ash leachate act as natural morphology regulators, facilitating the formation of a plate-like structure in the alumina product, with titanium exhibiting leaching behavior consistent with that of aluminum. Furthermore, a high content of AlO6 structural units in the precursor effectively promotes the direct conversion into dense α-Al2O3 crystals during thermal treatment, thereby enhancing product density. Under optimized conditions (800 °C, 1 h), the as-prepared α-Al2O3 exhibits a plate-like morphology, with a median particle size (d50) of 5.70 μm and a density of 4.94 g/cm3. This work provides a new approach for the synergistic resource utilization of coal gangue and biomass waste.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60669-X
Dry reforming of methane (DRM) converts CH4 and CO2 into syngas with a unity H2/CO ratio, but suffers from catalyst deactivation via sintering and carbon deposition at high temperatures. This study addresses these challenges by employing UiO-66 as a precursor to modify Pt-based catalysts. A series of Pt/CeO2-ZrO2 catalysts were synthesized via incipient wetness impregnation using supports with varying Ce/Zr ratios prepared hydrothermally. Comprehensive characterization—including CO2-TPD, CH4-TPD, XPS, XAFS, in situ DRIFTS, TG, and Raman spectroscopy—revealed a volcano-type correlation between DRM performance and Ce/Zr ratio. Optimal activity and stability were achieved with Pt/3CeO2-ZrO2 (Ce/Zr = 3:1). This catalyst features highly dispersed platinum, primarily as single atoms and thermally stable PtOx clusters. It exhibits the highest concentration of Ce3+ and Zr3+ species, abundant oxygen vacancies, and high defect density, indicating strong metal-support interaction. Mechanistically, stable DRM is facilitated by oxygen-assisted CH4 dissociation and hydrogen-assisted CO2 dissociation. At 800 °C, CH4 and CO2 conversions reached 86% and 93%, respectively, with H2/CO ratio near unity. A 10 h stability test showed no detectable carbon deposition. These results confirm that the catalyst enhances reaction kinetics while demonstrating superior activity, stability, and resistance to coking and sintering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3643-8
Inverted perovskite solar cells (PSCs) suffer from defect-mediated nonradiative recombination and inefficient charge extraction, particularly at the buried interface and grain boundaries (GBs), which limit power conversion efficiency (PCE) and operational stability. This study introduces a multifunctional phosphonic acid molecule, (2-(3,6-bis(trifluoromethoxy)-9H-carbazol-9-yl)ethyl)phosphonic acid (M28), as an additive in the perovskite precursor solution. M28 spontaneously segregates toward the buried interface and GBs, fulfilling three roles: (1) slowing crystallization to enlarge grains and improve film quality, (2) passivating defects to suppress charge recombination, and (3) inducing p-type doping to create an extra electric field that promotes hole transport. Devices incorporating M28 achieve a champion PCE of 25.96% and retain 80% of initial efficiency after 1500 h of maximum power point tracking. This work demonstrates the efficacy of multifunctional phosphonic acid additives in addressing buried-interface and GB defects, offering a viable route to high-performance, stable inverted PSCs.