SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4343-7
Piezoelectric materials interconvert mechanical and electrical energy, but piezoceramics are brittle while PVDF-based ferroelectric polymers exhibit low piezoelectric coefficients (d33 ≈ -30 pC N-1). Chemical modification via morphotropic phase boundary (MPB) engineering has raised d33 in P(VDF-TrFE) to -63.5 pC N-1, and to -69 pC N-1 with stretching, but intrinsic piezoelectricity in relaxor terpolymers remains limited. Here, relaxor ferroelectric P(VDF-TrFE-CFE) with varying C=C double bond (DB) content is synthesized via dehydrochlorination. Structural and electrical characterization reveals that increasing DB content stabilizes long-range ferroelectric order while suppressing short-range relaxor characteristics, forming a trans/helix phase boundary. At a critical DB content of 2.0 mol%, a markedly enhanced intrinsic d33 of -129.0 pC N-1 is achieved, outperforming previous MPB approaches. This finding addresses the fundamental bottleneck of low piezoelectric response in flexible ferroelectric polymers and provides a viable route for high-performance wearable electromechanical devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4306-5
Olefin-paraffin separation is a critical and energy-intensive process in the petrochemical industry, with ethylene and propylene purification alone consuming 0.3% of global energy. Current distillation methods are energy-inefficient, and polymer membranes exhibit inadequate separation performance. Metal-organic frameworks (MOFs), particularly ZIF-8, offer precise molecular sieving due to their uniform pore aperture (~3.4 Å), which lies between the kinetic diameters of propylene and propane. Despite excellent lab-scale performance, ZIF-8 membranes face scalability challenges, with effective areas typically below 10 cm², far from the tens of thousands to millions of square meters required industrially. This paper reviews a recent breakthrough by Weihong Xing, Yichang Pan, and colleagues, who developed a micro-space transformation process (MSTP) for scalable fabrication of heterostructured ZIF-8 (HZIF-8) membranes. Using sealed inner lumens of tubular ceramic supports as confined reaction spaces, they achieved single-tube areas of ~200 cm² and total fabricated areas exceeding 4.6 m². The membranes demonstrated stable separation performance over 30 days at 17 bar and 55 °C with a feed flow of 20 Nm³ d⁻¹. This work represents a significant step toward industrial application, addressing critical bottlenecks in membrane area expansion, defect control, and mechanical stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4211-y
Small interfering RNA (siRNA) holds promise for selective silencing of oncogenic drivers, yet its clinical translation is hindered by endosomal entrapment and inefficient cytosolic delivery. This review systematically examines the biological barriers to siRNA function, emphasizing that successful gene silencing requires not only cellular uptake but also endosomal escape, carrier dissociation, and RISC loading. We categorize current delivery strategies into carrier-free systems and stimuli-responsive carriers. Carrier-free approaches utilize coordination chemistry, molecular self-assembly, or peptide conjugation to form stable siRNA complexes that undergo intracellular dissociation. Stimuli-responsive carriers exploit endogenous tumor cues (e.g., acidic pH, elevated glutathione, specific enzymes, ATP) or exogenous triggers (e.g., light, ultrasound, magnetic fields) to achieve spatiotemporally controlled release. The review highlights recent advances in both strategies, with a focus on their application in cancer therapy. We critically assess the challenges that remain, including heterogeneity of tumor microenvironments, scalability of synthesis, and in vivo stability. Finally, we outline future directions for translating siRNA-based therapies into clinical practice, emphasizing the need for rational design of delivery systems that integrate multiple stimuli-responsiveness and active targeting to overcome biological barriers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4394-x
Spiral graphene, characterized by Bernal-stacked layers and unique electronic properties, holds promise for advanced quantum and optoelectronic devices. However, its controlled synthesis remains challenging. Here, we report the self-assembly growth of single-crystal spiral graphene on a liquid heterogeneous substrate via chemical vapor deposition (CVD). A 50-μm-thick Cu foil was placed on a Ni support and heated to 1083 °C, the melting point of pure Cu, ensuring a fully molten Cu layer on solid Ni. Growth proceeded for 30 minutes under optimized conditions. The resulting spiral graphene exhibits a uniform Bernal stacking configuration, as confirmed by transmission electron microscopy and selected-area electron diffraction. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) depth profiling and isotope-labeling experiments reveal that carbon incorporation occurs predominantly at the spiral step edges, following a self-assembly mechanism driven by the liquid substrate's dynamic surface. Control experiments on solid Cu-Ni alloys yield no spiral morphology, underscoring the critical role of the liquid phase. The liquid heterogeneous substrate facilitates rapid carbon diffusion and step-edge attachment, enabling the growth of high-quality single-crystal spirals with controlled layer number. This work provides a scalable route to synthesize spiral graphene with tailored stacking, advancing its application in twistronics and high-performance electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4213-x
Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3700-7
Photocatalytic synthesis has been considered a promising technology for solar-to-chemicals conversion. Here, a series of novel photocatalysts was synthesized by decorating uranyl sites on imine-based covalent organic frameworks (i-COF) and proved functioning for the uniformly boosted H2O2 production by 1.6–10.1 folds compared with the bare i-COFs in a wide pH range from 2 to 11. Typically, an optimal H2O2 production rate of 1435.9 μmol g−1 h−1, i.e., 28.72 mmol g(U)−1 h−1, was realized over uranyl decorated TTa-COFs under visible light. Systematic investigations reveal that the universally and remarkably promoted performance is attributed to the outstanding electron-transfer ability, accelerated activation of molecular oxygen and favored formation of ·O2− and *OOH as the key intermediate by virtue of the decorated uranyl ions; thus the two-step single-electron oxygen reduction reaction (ORR) for H2O2 photo-generation is significantly facilitated. This work paves a new way for the uranyl-decorated COFs as a novel photocatalyst and provides in-depth insight to the reaction mechanism for photocatalytic H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3617-x
Macrophages are pivotal in infection resolution and tissue repair via dynamic M1-to-M2 phenotypic polarization. Although various nano-biomaterials can modulate macrophage polarization, achieving sequential M1-to-M2 transition using a single nanoformulation remains challenging. Here, we propose a strategy employing transition metal carbide/nitride (MXene) nanosheets, internalized by macrophages, as the sole regulator to induce sequential polarization. Under a rotating magnetic field, the high electrical conductivity and magnetoelectric activity of endocytosed MXene generate electrical signals and reactive oxygen species (ROS), driving M1 polarization. Upon magnetic field removal, the inherent bioactivity of MXene facilitates repolarization to the M2 phenotype. Mechanistically, this transition involves inhibition of the NF-κB signaling pathway and activation of the JAK-STAT signaling pathway. In vivo, MXene nanosheets under on-off rotating magnetic field stimulation enabled sequential M1-to-M2 polarization, promoting bacterial clearance and tissue regeneration in infected wounds. This two-step sequential strategy targeting macrophages offers a promising therapeutic approach for infected wound healing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3432-8
This correction addresses an error in the labeling of author affiliations in the original publication (Sci China Mater, 2025, 68: 1561, DOI: 10.1007/s40843-024-3290-9). The corrected affiliations are as follows: Fuxia Huang, Feng Wang, Ya Liu, and Liejin Guo are affiliated with the International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Yifei Liu is affiliated with the School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. The correction was made upon the request of the authors and with approval from the respective institutions. The original article focused on crystal defects engineering of BiOI to enhance photocatalytic CO2 reduction to C2 products, a critical area for sustainable fuel synthesis. This correction ensures accurate attribution and institutional recognition, which is essential for research integrity and reproducibility. No changes were made to the scientific content or conclusions of the original study.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3740-y
The continuous advancement of bionanomaterial technology has driven significant strategic transformations in the design and fabrication of biomimetic nanocarriers. This review systematically traces the evolution from single-cell membrane nanovesicles to hybrid cell membrane nanovesicles integrating multiple cell membranes, culminating in cell membrane hybrid lipid nanoparticles (CM-LNPs) that combine natural cell membranes or membrane proteins with engineered synthetic phospholipids. This technological progression enables the synergistic retention of multicellular biological functions while incorporating advantageous synthetic material properties, such as enhanced engineering flexibility and surface modifiability. The article critically evaluates the advantages and limitations of traditional extrusion and ultrasonication methods for preparing cell membrane nanovesicles, highlighting the benefits and development prospects of novel microfluidic techniques in CM-LNP fabrication. Furthermore, it explores future application prospects and challenges of CM-LNPs in the biomedical field, particularly in drug delivery systems and precision medicine. The review underscores the potential of CM-LNPs to overcome clinical limitations of conventional liposomes, such as poor stability, rapid drug leakage, and inadequate targeting, by leveraging the natural homing effect of cell membranes and the tunability of synthetic lipids. Emphasis is placed on the role of microfluidics in achieving precise, scalable, and reproducible fabrication, which is critical for clinical translation. The abstract synthesizes current knowledge and identifies key research gaps, offering a forward-looking perspective on the engineering of biomimetic nanoparticles for advanced therapeutic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3780-3
Real-time health monitoring and ongoing evaluation of physiological conditions are becoming increasingly vital for the advancement of future medical diagnostics and personalized healthcare solutions. Given that certain illnesses necessitate prompt and accessible detection methods, wearable chemical sensors have garnered considerable interest for their capability to monitor health through physiological signals and chemical indicators. This review delivers a thorough examination of recent developments in four primary categories of wearable chemical sensors: biosensors, humidity sensors, gas sensors, and ion sensors. We explore the representative materials, device structures, operating mechanisms, and various application scenarios for each type of sensor. By investigating the latest innovations in these technologies, we aim to provide a detailed overview of the current research landscape, highlight existing challenges, and present potential future directions of wearable chemical sensors in healthcare monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3773-7
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells suffer from significant open-circuit voltage (VOC) deficits due to severe interfacial and bulk recombination, restricting their power conversion efficiency (PCE) far below the Shockley-Queisser limit. This work proposes a low-temperature annealing strategy during ITO sputtering (SA) to synergistically address these challenges. The temperature applied during ITO sputtering not only improves the crystallinity, carrier concentration, and optical transmittance of the ITO layer but also promotes the diffusion of In from ITO into both CdS and CZTSSe layers. Consequently, lattice matching at the CZTSSe/CdS interface is optimized, enabling epitaxial growth. And a favorable ITO/In:CdS/In&Cd:CZTSSe structure with optimal band alignment is obtained. As a result, a champion device with a PCE of 14.29% was achieved. The SA-treating also enabled the CZTSSe solar cells to achieve the highest VOC reported to date, exceeding 590 mV. This underscores the essential role of SA processing in optimizing interface engineering and suppressing defects, thus promoting the development of low-cost, high-performance kesterite photovoltaics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010203
The production and disposal of lithium batteries release not only hazardous metals and particulates but also substantial amounts of harmful organic pollutants. This study focuses on N-methyl-2-pyrrolidone (NMP) to investigate the environmental release and human exposure of organic pollutants throughout the lithium battery lifecycle. Using liquid chromatography-high-resolution mass spectrometry (LC-HRMS), NMP was quantified in environmental samples from battery production and dismantling facilities, as well as in pyrolysis products from simulated thermal recovery of mainstream lithium batteries. Key release stages were identified: slurry mixing and coating/drying during production; shredding, electrolyte volatilization, and high-temperature pyrolysis during disposal. In unprotected occupational settings, estimated NMP exposure via dust ingestion exceeded reference doses, underscoring the need for health impact assessments and evaluation of protective measures. This research provides critical insights into the environmental release and population exposure of organic pollutants across the lithium battery lifecycle, informing health policy for vulnerable populations.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024103107
Quantitative structure-activity relationship (QSAR) models were developed to predict the reaction rate constants (kO3) of aromatic compounds with ozone in water. Molecular descriptors were screened using a combination of genetic algorithm and stepwise regression. Multiple linear regression (MLR), support vector machine (SVM), and projection pursuit regression (PPR) were employed to construct local models. The PPR model exhibited superior performance with a goodness-of-fit R2 of 0.923, leave-one-out cross-validation Q2LOO of 0.836, and external validation Q2ext of 0.873. The model was interpreted using SHapley Additive exPlanations (SHAP), revealing that ozone attack is hindered by the presence of dssC (=C<) fragments and chlorine atoms. The applicability domain was characterized using Williams plots. Tree manifold approximation and projection (TMAP) was used to visualize structural similarity and diversity, and Arithmetic Residuals in K-groups Analysis (ARKA) identified potential activity cliffs. The model adheres to OECD principles for QSAR validation, providing a robust tool for predicting kO3 of untested or novel aromatic compounds and extendable to other environmental applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112102
Based on the 2022 activity data of non-road mobile sources in Hebei Province, this study employed the emission factor method recommended by the Guidelines to estimate emissions of CO, HC, NOx, PM2.5, PM10, and SO2. A comprehensive emission inventory was established, followed by spatial and uncertainty analyses. Scenario analysis, aligned with the 14th Five-Year Plan policies, was used to project emissions for 2030. The results indicate that non-road mobile sources in Hebei emitted 76.1×10^3 t of CO, 20.6×10^3 t of HC, 164.0×10^3 t of NOx, 8.5×10^3 t of PM2.5, 9.0×10^3 t of PM10, and 2.4×10^3 t of SO2. Agricultural machinery was the dominant contributor to CO, HC, PM2.5, and PM10, accounting for over 60.0% of CO emissions. Railway locomotives were the primary source of NOx, contributing 50.9%. For SO2, agricultural machinery and railway locomotives contributed 39.0% and 44.4%, respectively. The highest emitting cities were Tangshan (21.3%), Shijiazhuang (15.7%), Cangzhou (11.6%), and Handan (11.6%). Ship emissions were concentrated in Tangshan Port; civil aviation emissions were mainly in Shijiazhuang, Tangshan, Qinhuangdao, and Handan; railway emissions were distributed in Shijiazhuang, Baoding, and Handan. Under the updated emission standard scenario, NOx and PM10 emissions in 2030 could be reduced by approximately 35.0%. The phase-out of old machinery yielded the largest reduction in CO (36.0%), while both electrification and phase-out scenarios significantly impacted HC emissions.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508092
Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants with high environmental stability and bioaccumulation potential, posing risks to soil ecosystems and human health. To systematically map research hotspots and evolutionary trends, a bibliometric analysis was conducted on 1,459 publications from the Web of Science Core Collection and CNKI (1985–2025) using VOSviewer and Python. Keyword clustering identified four primary research themes: (1) transport and transformation of PFAS in soil, (2) bioaccumulation and toxic effects, (3) environmental fate and risk assessment of novel PFAS, and (4) remediation strategies for legacy PFAS. Temporal trend analysis using a trend factor (T) revealed a shift from early toxicological studies to policy-driven growth post-2006, with recent emphasis on remediation technologies, migration mechanisms, and bioconcentration. Future research priorities include understanding the fate of novel substitutes in complex media, developing green and sustainable remediation technologies, and establishing robust validation frameworks. The study provides a comprehensive knowledge map to guide scientific prevention and efficient governance of PFAS contamination.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507088
Methanol is highly biodegradable, yet its efficient and stable anaerobic treatment is constrained by prolonged microbial adaptation to toxic substances, narrow microbial community structure, and poor sludge granulation. This study applied two functional additives—sodium bicarbonate (NaHCO3) as an inorganic carbon source (IC) and an amino-acid-rich organic functional supplement (FS)—to accelerate the startup of two upflow anaerobic sludge blanket (UASB) reactors. UASB-A received 3,000 mg·L−1 NaHCO3 and 127 mg·L−1 FS, while UASB-B received only 3,000 mg·L−1 NaHCO3. Both additives enabled rapid startup and granulation by shortening hydraulic retention time (HRT) and increasing organic loading rates (4, 6, 9, 15, 20, and 30 g COD·L−1·d−1). Granulation was evidenced by increased total suspended solids (TSS), volatile suspended solids (VSS), and particle size distribution. Microbial community analysis at HRT 0.2 d revealed highest relative abundances of Acetobacterium at 30.2% (UASB-A) and 36.9% (UASB-B). NaHCO3 supplementation enhanced syntrophy between Acetobacterium and the acetoclastic methanogen Methanothrix, while FS significantly increased the abundance of Sporomusa, establishing a novel syntrophic relationship with Methanothrix. These interactions promoted sludge granulation. The study demonstrates that functional additives facilitate rapid startup and granulation in methanol anaerobic treatment, offering a strategy to overcome process bottlenecks.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507081
Coal chemical waste salt, a solid residue from evaporative crystallization of high-salinity wastewater, poses significant environmental risks and challenges for resource utilization due to its complex composition. This study systematically analyzes its composition and environmental hazards, highlighting its typical "mixed salt" nature and the potential threats of organic pollutants and heavy metals to soil, water, and ecosystems. It reviews mainstream treatment pathways, including organic degradation, inorganic impurity removal, and salt separation, with a focus on the resource utilization of sodium chloride and sodium sulfate and their industrial prospects. The current pollution control technical specifications and product quality standards are examined, comparing the scope and technical points of relevant standards such as the "Technical Specification for Pollution Control of Chemical Waste Salt." Finally, countermeasures are proposed to address challenges including difficult treatment of mixed salts, insufficient resource utilization incentives, and incomplete standard systems, emphasizing technological innovation, policy guidance, and standard improvement.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508021
Coal chemical industry waste salt, generated from high-salinity wastewater treatment, poses a bottleneck for green transformation under the 'dual carbon' strategy due to its low value and high complexity. This study investigated a typical coal chemical industrial park in Northwest China, using principal component analysis (PCA) on actual waste salt samples to identify pollutant characteristics and assess resource utilization potential. Results showed total organic carbon (TOC) ranged from 707.9 to 7,737.9 mg·kg⁻¹, with benzo(a)pyrene concentrations frequently exceeding the limits of the 'Identification Standards for Hazardous Wastes' (GB 5085.3). Hardness ions and metal ions also surpassed relevant product standards. PCA classified the waste salts into three types: sodium sulfate type, sodium chloride type, and high-complexity mixed salt, each corresponding to distinct resource utilization pathways. The study proposes differentiated technical routes based on PCA classification, providing a feasible reference for classified management and technology selection. This research supports the national policy of 'harmless pretreatment + resource utilization' for waste salt, contributing to green and high-quality development of the coal chemical industry.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010802
Ozone (O3) pollution is a prominent issue in the Guanzhong Plain, necessitating effective control of its precursors, particularly volatile organic compounds (VOCs). However, studies on VOC pollution characteristics at the county level are scarce. To investigate the summer VOC pollution characteristics and sources in high-altitude towns of the Guanzhong Plain, continuous monitoring of 53 typical VOC species was conducted at two sites in Changwu County, Xianyang City (elevation 1200 m). The spatiotemporal variations of ambient VOCs and their ozone formation potential (OFP) were analyzed, and source apportionment was performed using the Positive Matrix Factorization (PMF) model. Results showed that average total VOC (TVOCs) concentrations at the Changwu Government and Changwu Middle School sites were 60.04×10⁻⁹ and 83.28×10⁻⁹, respectively. Oxygenated VOCs (OVOCs) dominated, accounting for 55.14% and 62.91% of TVOCs, followed by alkenes, aromatic hydrocarbons, and halogenated hydrocarbons. Industrial sources contributed the most (43.2%) to VOC emissions in Changwu County, but site-specific differences were observed: the Government site was primarily influenced by solvent use (30.7%) and motor vehicles (19.1%), while the Middle School site was dominated by domestic sources (27.6%) and motor vehicles (20.0%). The average OFP values at the Government and Middle School sites were 258.84×10⁻⁹ and 378.04×10⁻⁹, respectively, with alkenes and OVOCs as the main contributors, originating from industrial emissions, solvent use, and biogenic sources. EKMA curves indicated that Changwu County was in a VOC-limited regime during the observation period, confirming the effectiveness of VOC control for ozone mitigation. These findings provide scientific guidance for local ozone management and offer a paradigm for precise ozone pollution control in county-level regions of the Guanzhong Plain.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225264
The high cost of high-purity hydrogen necessitates the utilization of low-cost industrial by-product hydrogen as an alternative gas source to reduce hydrogen storage costs. Industrial by-product hydrogen typically contains impurities such as H2S and CO, yet the poisoning mechanisms of these gases on superlattice hydrogen storage alloys during hydrogen absorption/desorption remain poorly understood. This study systematically investigates the poisoning effects and regeneration behavior of La0.65Mg1.32Ca1.03Ni9Y0.17 superlattice hydrogen storage alloy in atmospheres containing 10^-3 H2S and CO. The experimental protocol comprised 10 poisoning cycles followed by 1 regeneration, repeated to total 20 poisoning cycles and 2 pure hydrogen regenerations. Results show that in pure hydrogen, the alloy's hydrogen storage capacity gradually decreases after 22 cycles but is effectively restored after dehydrogenation at 473 K. In the presence of impurity gases, the hydrogen storage capacity retention rates after 10 poisoning cycles with H2S and CO are 3.56% and 2.71%, respectively; after 20 cycles, these decrease to 3.68% and 1.73%, respectively. After dehydrogenation at 473 K, retention rates recover to 40.35% and 98.27%, respectively. This indicates that poisoning severity follows the order CO > H2S, while regeneration difficulty follows H2S > CO. X-ray diffraction analysis reveals that after poisoning, the main phase transforms from AB3 to AB3H, but reverts to AB3 after high-temperature dehydrogenation. X-ray photoelectron spectroscopy shows that after H2S poisoning, CaS and CaSO4 form on the alloy surface, indicating irreversible chemical adsorption. In contrast, after CO poisoning, no new substances are detected, indicating reversible adsorption. This study clarifies the differentiated poisoning mechanisms of impurity gases and provides theoretical support for the application of rare-earth superlattice hydrogen storage alloys in complex atmospheres.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3938-0
Chirality is a fundamental property ubiquitous in nature, playing a pivotal role across physics, chemistry, biology, and materials science. With the advent of nanotechnology, chiral research has extended to the nanoscale, where chiral quantum dots have attracted attention due to high photoluminescence quantum yields and stability. However, conventional II–VI quantum dots often contain toxic heavy metals, exhibit poor water solubility and biocompatibility, and require complex preparation. Carbon dots (CDs), a novel class of carbon-based nanomaterials under 10 nm, offer low toxicity, straightforward synthesis, and excellent biocompatibility. Chiral carbon dots (Ch-CDs) combine the advantages of CDs with intrinsic chirality, endowing them with circularly polarized luminescence (CPL) and distinctive photophysical and chemical properties. This review systematically refines and summarizes construction strategies for Ch-CDs, including one-step synthesis, surface modification, and assembly methods. It comprehensively elaborates on recent advances in optical properties, focusing on tunable multicolor CPL, CPL enhancement, and triplet-state emission, addressing a gap in reviews on triplet-related chiral functionalities. The challenges and future perspectives for diversified applications are proposed. Ch-CDs have been extensively applied in photoelectric detection, optical devices, biomedicine, information anti-counterfeiting, and encryption. This review aims to summarize current achievements and stimulate further research, fostering rapid development in the Ch-CDs field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3829-7
Circularly polarized luminescence (CPL) is pivotal for advanced photonic applications, yet achieving concurrent high emission efficiency and large dissymmetry factors remains challenging. Here, we report a chiral reticular chemistry strategy to construct homochiral porous metal-organic frameworks (MOFs) as efficient CPL-active materials. By co-assembling enantiopure R/S-binol with achiral luminescent ligands, three pairs of enantiomeric pillar-layered MOFs were synthesized. These frameworks exhibit significantly amplified CPL responses, with |g_lum| values enhanced by up to two orders of magnitude compared to free ligands, reaching levels comparable to state-of-the-art chiral assemblies, while maintaining high photoluminescence efficiencies (Φ_PL up to 67%). Mechanistic investigations reveal that CPL originates primarily from the global chirality of the hierarchical frameworks rather than the intrinsic chirality of the precursors. This work establishes a robust design principle for porous CPL-active materials, offering new insights into chirality transfer and opening avenues to integrate strong luminescence with stable chirality in extended frameworks.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3858-8
High-quality β-Ga2O3 membranes are pivotal for fabricating high-performance memristive devices. Here, vertical Ag/β-Ga2O3/Pt memristors built on high-crystalline-quality β-Ga2O3 membranes via lattice epitaxy engineering and a sacrificial-layer-assisted exfoliation strategy are reported. The resulting β-Ga2O3-based device demonstrates a high ON/OFF ratio exceeding 10^8, low SET/RESET voltages of 0.13 V/−0.11 V, low programming current of 10^-10 A, stable data retention beyond 4 × 10^4 s, and excellent subthreshold characteristics of ~0.47 mV/dec. Adjustable compliance current enables the coexistence of volatile and non-volatile switching modes. Additionally, the resistive switching versatility is predominantly governed by the migration of Ag ions, as supported by electrical characterizations and first-principles calculations. Furthermore, a β-Ga2O3 memristor-based circuit that functions as a reconfigurable and non-volatile exclusive OR (XOR) logic gate has been designed and simulated, enabling both image encryption/decryption and edge detection. This work not only demonstrates lattice-engineered, high-quality β-Ga2O3 membranes for fabricating advanced memristors but also extends their applicability to digital logic and reconfigurable image processing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3840-3
Tactile sensing for dexterous robotic hands is essential for achieving human-like precision in manipulation. However, current tactile sensors face challenges such as insufficient durability, limited coverage, and poor conformability to curved, jointed surfaces. This study presents a stretchable distributed tactile sensor array designed for dexterous robotic hands. The array comprises 18 sensing units distributed across the hand, incorporating quasi-homogeneous functional layers interconnected by crosslinked interpenetrating networks, and composite electrodes combining high conductivity with stretchability. This design yields a thin, soft, transparent, and stretchable sensor array that integrates seamlessly with a commercial dexterous hand. The sensor array exhibits high interlayer tensile strength, high sensitivity, low hysteresis, and excellent long-term reliability over 10,000 loading cycles. Experimental results demonstrate accurate detection of tactile force across the entire robotic hand during object grasping. Using convolutional neural network algorithms, the sensor array identifies different object types with 90.1% accuracy, with results displayed in real time on a digital twin interface. The proposed sensor array holds significant potential for embodied intelligence and robotics in adaptive grasping, safe manipulation, and remote teleoperation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60648-2
The influence of mixing modes on the integrated process of co-pyrolysis of Naomaohu coal (NMH) and elm (ELM) with CO2 reforming of methane (CP-CRM) was investigated over Ni-based catalysts prepared by ball milling. Three mixing modes—NMH/ELM, ELM/NMH, and Blends—were examined and compared with co-pyrolysis under N2 (CP-N2). Results show that product distribution was significantly affected by mixing mode. The Blends mode achieved the highest tar yield, increasing by 35.29% compared with CP-N2. Light oil content in tar was higher, while pitch content was lower for Blends relative to layered modes. Phenols content in tar from Blends was 19.52% higher than CP-N2, and free radical concentration in tar was higher, attributed to enhanced heat and mass transfer between particles by mechanical mixing, promoting complete pyrolysis and efficient utilization of hydrogen-rich free radicals (·H, ·CHx) to suppress secondary cracking and polymerization. In contrast, NMH/ELM mode in CP-CRM improved phenols content by 33.27% over CP-N2. Free radical concentration in tar during CP-CRM was lower than in CP-N2, indicating timely stabilization of pyrolysis radicals by reforming-generated radicals. These findings provide guidance for regulating tar yield and composition in co-pyrolysis processes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031905
Land use types profoundly influence the accumulation, speciation, and ecological risk of heavy metals through differences in human activity intensity, pollution input pathways, and soil self-regulation capacity. This study investigated soils of different land use types in Longhua County, downstream of the Yixun River Basin, central Chengde City, Hebei Province. Using the Nemerow Index and Potential Ecological Risk Index, the overall regional pollution was mild (Pn=1.65) with low ecological risk (RI=121.17). Main pollutants were Cd, Pb, Zn, and Hg, with Cd and Hg as primary ecological risk factors. Construction land exhibited moderate pollution and medium risk, with a Nemerow Index of 2.37 and average RI of 190.78, significantly exceeding other land use types. PMF model identified four pollution sources: pedogenic parent material natural source (43.54% contribution) dominating Cr, Cu, Ni, Zn enrichment; metallogenic parent material natural source (19.88%) controlling Cd spatial differentiation; agricultural-transportation mixed source (24.79%) driving As and Pb accumulation; and industrial source (11.93%) causing local Hg enrichment. Natural sources contributed 63.42% of total heavy metals, being the primary contributor. As was generally below background values, not constituting pollution; Pb exceeded standards but posed low ecological risk; industrial Hg enrichment in construction land presented high pollution and ecological risk, requiring priority control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4011-7
Biomass-derived room-temperature phosphorescence (RTP) carbon dots (CDs) hold great promise for anti-counterfeiting and information encryption. However, achieving solid-state matrix-free long-lived CDs with time-dependent phosphorescence colors (TDPC) remains challenging due to aggregation-induced quenching. Here, solid-state matrix-free RTP phosphorus-doped CDs (P-CDs) are developed via one-step hydrothermal treatment of feather powder and phytic acid. The resulting P-CDs powder exhibits bright blue fluorescence under UV illumination and unprecedented TDPC shifting from yellow to green after UV removal, with afterglow lasting 12 s (average lifetime 1.15 s). Enhanced RTP is attributed to increased triplet-state excitons via spin-orbit coupling induced by P-doping. A dual-mode luminescent ink formulated by combining P-CDs with polyvinyl alcohol (PVA) is successfully applied to commercial A4 paper, showing pronounced TDPC (light-yellow to green) with improved RTP lifetime (1.31 s) after ceasing UV irradiation. The P-CDs/PVA ink demonstrates excellent anti-counterfeiting and information encryption capabilities, outstanding luminescent durability, and broad practicability on cellulosic substrates including fabric and paper. These findings provide a strategy for exploiting matrix-free solid-state RTP P-CDs with distinctive TDPC properties and offer a sustainable route to converting feather wastes into high-value materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511095
To address the low temporal resolution of conventional monthly dustfall monitoring and the lack of component information, this study proposed a daily dustfall measurement method that adds a filtration step to the Chinese standard method, referencing international standards. Using a sand-core filtration device with quartz or mixed cellulose ester membranes, the method achieved a spiked recovery of 101.1% ± 1.2%, good parallelism (y = 0.95x + 0.28), and satisfactory temporal closure. During autumn–winter (November 2020 to March 2021) at a representative site in Xicheng District, Beijing, daily dustfall ranged from 0.06 to 2.33 t·(km²·d)−1. Days with daily dustfall exceeding 0.7 t·(km²·d)−1 accounted for only 4% of the sampling days but contributed 25% of the total dustfall, with high values mainly occurring in January, March, and December. The insoluble fraction averaged 83% ± 12%, and a logarithmic model (y = 9.36ln(x) + 99.98) was established to estimate the insoluble proportion from insoluble dustfall (x, ≤1.00). Daily dustfall showed a strong positive correlation with average wind speed, and an exponential prediction model (y = 0.06e0.61x) was derived. Windy conditions (≥3 on the Beaufort scale) significantly amplified dustfall. The study recommends suspending earthwork, covering bare ground, and increasing watering frequency during high-wind alerts to mitigate dust pollution. This work provides a reliable method for high-resolution dustfall monitoring and insights for targeted pollution control in urban core areas.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512015
The co-contamination of cadmium (Cd), lead (Pb), and zinc (Zn) in agricultural soils near mining areas poses significant risks to ecosystems and human health. Conventional stabilization materials often exhibit insufficient performance for Zn, particularly in multi-metal systems. This study synthesized a novel composite biochar (PFMBC) by loading phosphate and iron-manganese oxides onto biochar via phosphoric acid impregnation followed by secondary pyrolysis at 600 °C. The stabilization efficiency of PFMBC was evaluated against pristine biochar (BC) and iron-manganese modified biochar (FMBC) in a soil collected from a lead-zinc mining area (total Cd: 43.77 mg·kg−1, Pb: 3355.94 mg·kg−1, Zn: 1296.57 mg·kg−1). After 60 days of incubation with 5% PFMBC, the DTPA-extractable (bioavailable) fractions of Cd, Pb, and Zn decreased by 73.44%, 90.10%, and 69.33%, respectively, significantly outperforming BC and FMBC. Sequential extraction indicated that PFMBC promoted the transformation of Cd, Pb, and Zn from acid-soluble and reducible fractions to more stable residual fractions. Characterization via FTIR, SEM, and XRD revealed enhanced surface functional groups and the formation of stable mineral phases. The synergistic effects of phosphate precipitation, iron-manganese oxide adsorption, and surface complexation contributed to the superior stabilization, particularly overcoming the challenge of Zn immobilization. These findings demonstrate that PFMBC is a promising amendment for the remediation of Cd-Pb-Zn co-contaminated soils, offering high efficiency and long-term stability.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60752-9
Methanol steam reforming (MSR) is a pivotal process for efficient hydrogen production. This study employs density functional theory (DFT) calculations to comparatively analyze the MSR reaction mechanism on PdCu(111) and PtCu(111) bimetallic surfaces. The investigation unveils how alloying modulates reaction pathways and overall catalytic performance. Notably, Cu sites stabilize adsorption of OH and CH2O species, whereas Pd/Pt sites exhibit preferential affinity for CO. This spatial site separation facilitates progression along the formate pathway. PdCu(111) demonstrates superior overall catalytic performance compared to PtCu(111), with water dissociation identified as the rate-determining step (RDS), featuring an activation energy of only 0.74 eV. The bimetallic synergy breaks the inherent contradiction between activity and selectivity of monometallic catalysts: Cu sites serve as a source of hydroxyl groups, while Pd/Pt sites enhance C–H bond cleavage efficiency, ultimately enabling high methanol conversion alongside low CO formation. From the perspectives of electronic structure and geometric configuration, this study establishes a theoretical framework to guide rational design of high-performance bimetallic catalysts for MSR.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60762-1
The CO2 dry reforming of methane (DRM) is pivotal for CO2 utilization within the dual-carbon framework, offering advantages in carbon reduction and value-added chemical production. However, shaped catalysts suitable for industrial-scale DRM remain limited. This work constructs a monolithic catalyst using honeycomb cordierite as the structural support, systematically investigating the effects of organic and inorganic binders on coating structure and catalytic performance. Comparative studies reveal that the active coating fabricated with inorganic aluminum sol exhibits a continuous uniform morphology and excellent adhesion strength. During high-temperature calcination, elemental diffusion within Al2O3 networks bridges the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This creates robust metal-support interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provides superior pore confinement, contributing to strong coating adhesion, enhanced activity, and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, coatings derived from inorganic silica sol suffer from detachment and activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrate inferior performance in macroscopic coating uniformity, adhesion strength, mesoporous confinement, and localized electronic effects, resulting in the poorest catalytic performance. By optimizing aluminum sol coating parameters—binder content, active component dosage, and coating cycles—a synergistic balance between coating thickness and mass transfer is achieved. The optimized catalyst demonstrates excellent DRM performance, providing insights for constructing high-performance shaped catalysts with cordierite coatings.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042103
This study investigated the spatiotemporal distribution, ecological risk, and sources of seven heavy metals (Cr, Cd, Cu, Ni, Pb, Zn, As) in surface sediments of Ranwu Lake, Xizang. Twelve samples were collected during the glacial ablation period (July 2024) and late glacial ablation period (November 2024). Concentrations were determined and analyzed using inverse distance weighting (IDW) for spatial patterns, geo-accumulation index (Igeo) and potential ecological risk index (RI) for risk assessment, and correlation analysis (CA), principal component analysis (PCA), and absolute principal component score-multiple linear regression (APCS-MLR) for source apportionment. Results showed that during glacial ablation, mean Cr, Cd, Pb, and As exceeded Xizang soil background values, while in the late ablation period only Cd, Pb, and As remained elevated. Spatial distribution varied between periods, with high concentrations in the middle and lower lake during ablation, shifting to the lower lake in the late period. Igeo and RI indicated overall low ecological risk, with Cd as the primary risk factor; mean RI values were 81.79 and 98.30 for the two periods, respectively. Source apportionment revealed that heavy metals mainly originated from natural and transportation sources, with traffic emissions being the major contributor to ecological risk. Specifically, Cr, Ni, and As were predominantly natural, Cd and Pb were mainly traffic-related, and Cu and Zn were influenced by both natural and traffic sources.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022402
Graphene oxide–silver nanoparticle (GO-AgNPs) nanocomposites synergistically combine the high specific surface area and biocompatibility of graphene oxide with the potent antibacterial and optical properties of silver nanoparticles. This review systematically examines current synthetic strategies—physical, chemical, and biological—and their influence on nanocomposite morphology, loading efficiency, and stability. The biomedical applications of GO-AgNPs are critically analyzed, focusing on antimicrobial activity, anticancer therapy, drug delivery, and biosensing. Mechanistic insights reveal that antimicrobial action involves membrane disruption, oxidative stress, and damage to biomolecules, while anticancer effects are mediated through reactive oxygen species (ROS) generation. The review also addresses challenges such as AgNP aggregation and stability, which are mitigated by GO support. Future directions emphasize the development of multifunctional nanomedicine platforms, with a need for standardized toxicity assessments and scalable synthesis. This comprehensive overview aims to guide further research and clinical translation of GO-AgNPs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3951-4
Silicon anodes offer an ultrahigh theoretical capacity (4200 mAh g−1) but suffer from >300% volumetric expansion during cycling and unstable solid electrolyte interphase (SEI) formation, leading to rapid capacity fading. Here, we design a hierarchical composite p-cSi@aSi@MgSiN2@C featuring a porous crystalline-amorphous silicon core (p-cSi@aSi), an in-situ MgSiN2 transition layer, and an outer nitrogen-doped carbon shell. The 3D interconnected pores accommodate volume expansion, while amorphous silicon enables isotropic lithiation-induced strain, eliminating crystalline phase transition barriers. The MgSiN2 layer transforms into a tough Li3N-rich SEI with ultra-fast ion channels, and the carbon shell provides mechanical confinement and electronic conductivity. This synergistic interface engineering achieves an initial coulombic efficiency (ICE) of 81.4%, a charge transfer resistance of 16.4 Ω after 200 cycles (64% reduction), and a Li+ diffusion coefficient of 1.72×10−11 cm2 s−1. The anode delivers 1719.3 mAh g−1 at 0.2 C after 200 cycles and 823.8 mAh g−1 at 0.5 C after 500 cycles. The molten salt electrolysis synthesis achieves a current efficiency of 68.12% and specific energy consumption of 12.76 kWh kg−1, with an estimated electricity cost of 1154.69 USD ton−1, only 20% of commercial Si/C anodes. This work resolves the ICE-cycle life trade-off and provides a scalable, cost-effective approach for next-generation high-energy batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4100-9
Shape memory droplet manipulation platforms have attracted significant attention due to their programmable droplet control capabilities. Current research primarily focuses on superhydrophobic surfaces and slippery lubricant-infused porous surfaces (SLIPS); however, these approaches suffer from vulnerable surface micro/nanostructures and loss of lubricant oils. Here, we report a shape memory quasi-liquid polydimethylsiloxane (PDMS) brush surface that overcomes these limitations. The surface is fabricated by introducing a SiO2 layer as a 'bridge' on a shape memory epoxy substrate, providing abundant functional groups for grafting PDMS brushes. By precisely controlling the SiO2 layer thickness and grafting conditions, the surface exhibits good shape memory properties and low adhesion to diverse liquids with varying surface tensions. Reversible anisotropic/isotropic droplet sliding control for both water and organic droplets is demonstrated through dynamic introduction/removal of groove structures, proving excellent droplet manipulation based on the combination of shape memory and low adhesion of PDMS brushes. Furthermore, the material can be applied as a functional coating on diverse substrates to impart anti-fouling and self-cleaning properties. This work introduces a nanoscale SiO2 layer as a 'bridge', offering a strategy to graft PDMS brushes onto polymer surfaces. Given the advantages of quasi-liquid PDMS brushes and programmable controllability of shape memory polymers, this work provides fresh ideas for developing droplet manipulation platforms.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3998-8
Constitutional isomerism in covalent organic frameworks (COFs) has emerged as a powerful strategy to tailor material properties for photocatalytic applications. Here, we report the design and synthesis of two isomeric multicomponent COFs (MC-COFs) via Schiff-base condensation followed by Povarov reaction, converting imine linkages into quinoline structures. These isomeric MC-COFs exhibit opposing C=N bond orientations and distinct phenyl group alignments within the COF pores, leading to different torsion angles in the COF layers. Structural analyses reveal that enhanced planarity promotes π-π stacking and electron delocalization, resulting in favorable band structures and reduced exciton binding energies. Consequently, the optimized COF achieves a superior hydrogen peroxide (H2O2) production rate of 3128 μmol g−1 h−1 under visible light irradiation. This work underscores the critical influence of structural isomerism on the photocatalytic efficiency of MC-COFs and provides insights for rational design of high-performance COF-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4045-x
The release of radioactive iodine from nuclear accidents and nuclear medicine poses significant environmental and health risks. Here, we report the design and synthesis of two cross-linked macrocycle-based porous organic polymers (P1 and P2) with different functionalities for efficient and rapid capture of radioactive iodine. P1 achieves complete iodine adsorption within 5 minutes, with an exceptional adsorption rate constant (k_obs) of 18.92 g g−1 min−1 (8.24 g g−1 min−1 for P2), representing a record-high iodine removal rate among state-of-the-art porous organic polymers. P1 demonstrates superior iodine adsorption efficacy in dynamic flow-through experiments, achieving a remarkable efficiency of 96.4% for radioactive 131I removal, greatly minimizing radiation contamination. Experimental and modelling techniques reveal that the superior iodine adsorption performance originates from electron-rich functional groups, hydrophobic surface, and porous structure of P1, thus exhibiting remarkable iodine capture capabilities through charge transfer, halogen bonding, and hydrophobic effects. The adsorbents show excellent stability and performance under complex and harsh conditions (pH 2–10) and can be easily regenerated, confirming their excellent reusability and potential for practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4033-1
Photodetectors are critical components in modern optoelectronic systems, underpinning applications in optical communication, low-altitude economy, environmental monitoring, and national defense. Layered two-dimensional (2D) materials such as MoS2, WS2, black phosphorus (BP), and ReS2 have attracted extensive attention due to their remarkable electronic and optical properties, including facile mechanical exfoliation and tunable characteristics via thickness engineering. The absence of dangling bonds enables the construction of van der Waals (vdW) heterostructures free from lattice-matching constraints, promoting efficient charge transport, enhanced light absorption, and suppressed dark current. Among layered materials, semimetals such as graphene, PdTe2, MoTe2, and TaIrTe4 exhibit narrow or zero bandgaps, enabling ultrabroadband spectral responses from ultraviolet (UV) to terahertz (THz). ZrTe3, a layered gapless semimetal, demonstrates pronounced carrier transport features, including robust excitons and ultrafast carrier relaxation times, making it an ideal candidate for photodetection. However, pure ZrTe3-based photodetectors suffer from substantial dark current due to the absence of an energy bandgap, degrading signal-to-noise ratio and specific detectivity (D*). This work reports a high-performance broadband photodetector based on a ZrTe3/CuInP2Se6 heterostructure. By exploiting an asymmetric contact configuration that introduces a Schottky barrier, the device effectively suppresses dark current while enhancing photoresponse. The photodetector exhibits broad spectral sensitivity from UV to near-infrared (355–1177 nm), microsecond-level response speed, and high responsivity and specific detectivity. Beyond conventional photodetection, an optoelectronic information encryption-decryption application is demonstrated, where modulated light and bias voltage serve as dual input channels to encode and decode ASCII signals. This study resolves the challenge of high dark current in semimetal-based photodetectors and introduces a multifunctional platform for secure optoelectronic communication, highlighting the potential of ZrTe3 for next-generation photonic and quantum information technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4039-1
Immunosuppressive metabolites are major drivers of tumor immune suppression. Among these, kynurenine (Kyn) is produced through the catalysis of tryptophan (Trp) 2,3-dioxygenase (TDO) in hepatocellular carcinoma. However, TDO inhibition alone is often insufficient because residual pathway flux sustains the accumulation of the downstream immunosuppressive metabolite quinolinic acid (QA). Here, we propose a strategy to disrupt residual kynurenine pathway activity to enhance metabolism-driven tumor immunotherapy. We develop acid-responsive metal-organic complex nanoparticles (APAP@TDOi-Zn, ATZn) that integrate the TDO inhibitor (TDOi) and Zn2+, while encapsulating acetaminophen (APAP) to inhibit 3-hydroxyanthranilate 3,4-dioxygenase (HAAO), thereby limiting QA production and simultaneously suppressing the residual immunosuppressive metabolite. QA suppression limits M2 macrophage polarization, whereas Kyn inhibition and Zn2+ supplementation promote T cell proliferation and cytotoxicity. Consequently, ATZn rewires Trp-Kyn metabolism and augments antitumor immunotherapy. This work enhances the efficacy of metabolic checkpoint blockade and provides a strategy to overcome metabolism-driven immune resistance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4109-2
The fabrication of high-efficiency organic solar cells (OSCs) under ambient conditions remains a formidable challenge due to the sensitivity of active layer morphology to environmental factors. We propose an innovative approach for air-processed devices that combines spontaneous water-spreading film formation with layer-by-layer (LBL) deposition. This method enables the fabrication of donor- and acceptor-dominant bulk heterojunction blend films near the anode and cathode interfacial layers, respectively, optimizing vertical phase separation and enhancing charge transfer efficiency. In the D18:L8-BO system, the device achieves a power conversion efficiency (PCE) of 19.02% with an exceptionally narrow efficiency distribution. Even for devices with an area of 1 cm2, a PCE of 16.56% is attained. After a 1000-hour decay test, the efficiency retains 84.1%. This novel method offers a promising pathway for advancing the industrial application of large-area, highly stable devices with narrow efficiency distribution under ambient conditions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4048-x
Selective oxidation of aromatic alkanes is a key reaction to produce high-value chemicals in the chemical industry. However, the strong C–H bonds and inert chemical properties of aromatic alkanes render the oxidation process difficult, thereby making the development of promising and sustainable catalysts highly desirable. Herein, a resin-assisted coordination co-assembly strategy is developed to synthesize heterometal-doped mesoporous Co3O4 with abundant oxygen vacancies, enabling precise control over both composition and pore structure. The site-specific Mn doping at octahedral sites of mesoporous Co3O4 promotes the formation of oxygen vacancy with enhanced activity. Density functional theory calculations further demonstrate that Mn doping in mesoporous Co3O4 reduces the oxygen vacancy formation energy, induces the electronic structure modifications and introduces the defect energy levels, finally promoting the efficient catalytic oxidation of a series of aromatic alkanes. Representatively, Mn-doped mesoporous Co3O4 exhibits remarkably outstanding catalytic activity, achieving 37% conversion of ethylbenzene and 97% selectivity for acetophenone under solvent-free conditions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4118-0
Polymer composite dielectrics are key materials for high-temperature film capacitors, yet their energy storage capability is severely constrained at elevated temperatures. Molecular fillers that simultaneously integrate deep-level trapping (high electron affinity, Ea), strong insulation (large bandgap, Eg), and high thermal stability are rarely available, posing a major challenge for improving high-temperature energy storage performance. To address this challenge, we screen and identify hexaazatriphenylene hexacarbonitrile (HAT-CN) as a promising candidate that fulfills the above critical requirements from numerous commercial organic molecules. When incorporated into a high glass transition temperature (Tg) polymer fluorene polyester (FPE), the resulting all-organic composite exhibits simultaneously suppressed high-temperature conduction loss and preserved mechanical robustness. Consequently, the optimized composite achieves record-high discharged energy densities of 7.31 J cm−3 at 150 °C and 6.14 J cm−3 at 200 °C (η≥90%) with a low cost and scalable process. This work demonstrates that the filler design based on synergistic key properties provides a potent pathway to break the longstanding high-temperature performance bottleneck in polymer dielectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4026-0
Copper-based synergistic therapy integrating chemodynamic therapy (CDT) and cuproptosis holds promise for tumor treatment but faces clinical translation hurdles including long-term toxicity, low catalytic efficiency, off-target effects, and copper ion efflux. Here, we developed metabolizable ultrasmall benzothiazole-based covalent organic framework nanodots (COF NDs) via click condensation followed by liquid exfoliation. The dense donor-acceptor configurations confer a high photothermal conversion efficiency of 51.16%, while bisthiazole motifs enable specific Cu2+/Cu+ chelation (0.56:0.44), facile PEGylation, and mitochondrial targeting. These features enhance physiological stability and enable tumor-specific photothermal-catalytic synergy. Mitochondrial accumulation elevates intracellular copper to a critical threshold, inducing cuproptosis and suppressing tumor growth and metastasis. The NDs are efficiently excreted via renal and fecal pathways, demonstrating favorable biocompatibility and clinical potential as copper-based nanotherapeutics.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3480-1
Electrochemical nitrate reduction to ammonia (NRA) offers a sustainable route for wastewater denitrification and decentralized ammonia synthesis, but its practical deployment is constrained by sluggish reaction kinetics and the competing hydrogen evolution reaction (HER). Monometallic Cu electrocatalysts, despite favorable nitrate adsorption and tunable electronic structure, exhibit weak H* adsorption, limiting the hydrogen radical-mediated pathway that suppresses HER at low overpotentials. Here, highly dispersed Cu/WO3 heterojunctions supported on carbon fiber were synthesized via carbothermal shock reduction, which reaches ultra-high temperatures within seconds and prevents active-site accumulation. The optimal Cu/WO3 heterojunction achieves an ammonia yield rate of 158.66 μmol h−1 cm−2 and a Faradaic efficiency of 98.27%. Electron paramagnetic resonance and density functional theory calculations reveal a synergistic mechanism: Cu sites preferentially adsorb NO3−, while adjacent WO3 sites accelerate water dissociation to generate hydrogen radicals (H*), which drive the continuous hydrogenation of nitrate to ammonia. This spatial separation of functions promotes the H*-mediated pathway and suppresses HER. The work establishes a heterojunction design strategy for non-precious-metal NRA electrocatalysts, enabling high-rate, high-selectivity ammonia production under mild conditions.