SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4467-x
Conventional eye-movement interaction systems depend on video capture, infrared tracking, and image recognition, which impose inherent constraints on accuracy, response latency, and stability. This study introduces an eyelash-guided signal interaction system based on a triboelectric nanogenerator (PF-TENG) using PDMS-FDTS thin films. The system employs eyelash movements as interactive inputs, eliminating the need for complex optical acquisition devices. A CNN-LSTM hybrid neural network classifies distinct eyelash movement patterns with a classification accuracy exceeding 98.5%. The PF-TENG device exhibits ultra-flexibility and transparency, enabling seamless integration onto eyeglasses without obstructing the user's field of view. Experimental validation demonstrates real-time monitoring of ocular states for driving fatigue detection, accurately identifying fatigue signs and enhancing application potential in intelligent driving. The system offers a natural, comfortable input modality and significant advantages for human-machine interaction, with broad prospects in eye-movement control and intelligent transportation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4383-8
Conventional cancer therapies remain constrained by undruggable oncogenic proteins and acquired resistance. Proteolysis targeting chimeras (PROTACs) have emerged as a transformative modality that harnesses the ubiquitin-proteasome system to selectively degrade target proteins, offering advantages over traditional small-molecule inhibitors. However, clinical translation of PROTACs is impeded by intrinsic physicochemical limitations: high molecular weight, poor bioavailability, and lack of tumor-specific delivery. Integrating PROTACs with nanotechnology has yielded advanced nano-PROTACs platforms. Nanocarriers enhance solubility and stability, optimize pharmacokinetics, and enable spatiotemporally controlled drug release through passive or active targeting. This review systematically summarizes recent advances in engineering multifunctional nano-PROTACs for cancer therapy, with particular emphasis on design strategies by which nanoengineering enhances PROTAC performance. We evaluate how these platforms improve anticancer efficacy and minimize systemic toxicity while exploring their therapeutic potential in monotherapy and synergistic treatment settings. Finally, we discuss current challenges and future perspectives, providing a theoretical and technical foundation for next-generation nano-PROTACs as a precise and potent strategy in precision oncology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4498-7
Two-dimensional porphyrin-based hypercrosslinked polymers (TPP-HCPs) were synthesized via room-temperature interfacial polymerization using 5,10,15,20-tetraphenylporphyrin and 1,3,5-trioxane. The resulting TPP-HCPs exhibited a BET surface area of 548 m2 g-1 and a CO2 uptake of 7.97 wt% at 1 bar and 298 K. CuO/TPP-HCPs nanospheres were fabricated by thermal conversion of Cu(NO3)2·3H2O in DMF at 135 °C, using TPP-HCPs as dynamic templates. This in-situ strategy generated CuO nanoparticles within the conjugated porous matrix, facilitating electron transfer and enhancing CO2 access to catalytic centers. In CO2 electroreduction, the composite achieved a total gas Faradaic efficiency exceeding 90% at ~500 mA cm-2 (-1.4 V vs. RHE), with 40.9% for C2H4, 8.2% for CH4, 31.9% for CO, and 12.3% for H2. The catalyst maintained stability over 24 h in an H-cell. These results demonstrate that 2D conjugated polymer-templated catalysts can sustain high-rate CO2 conversion to value-added products, offering a viable route for industrial CO2 utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4138-5
Electrocoagulation (EC) has emerged as a promising electrochemical technology for wastewater treatment, offering distinct advantages over conventional chemical coagulation and membrane processes. This review systematically summarizes recent advancements in EC, focusing on the underlying mechanisms, key operating parameters, and diverse technical applications. The EC process involves three stages: electrolytic oxidation and in-situ coagulant formation, destabilization of contaminants, and floc formation. Unlike chemical coagulation, EC requires no external chemical additives, and process control is achieved by adjusting current density, voltage, or electrode materials, enabling adaptation to varying wastewater qualities. The review highlights the influence of dissolved organic matter (DOM) on EC efficiency, as clarified by Luo et al. (Water Research, 2025). Furthermore, it discusses reactor design innovations, including continuous-flow and cascade-type configurations, and the role of current waveforms in mitigating electrode passivation. The integration of EC with membrane bioreactors and forward osmosis is also examined, demonstrating enhanced treatment performance and fouling mitigation. Key challenges, such as energy consumption and electrode scaling, are addressed, along with future research directions. This comprehensive analysis provides a critical framework for optimizing EC systems and scaling them for industrial wastewater treatment, emphasizing the need for holistic reactor design and process integration to achieve sustainable water reuse.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4359-0
Organic solar cells (OSCs) require cathode interlayers (CILs) that combine high charge transport, defect passivation, and thickness insensitivity for scalable manufacturing. Here, we report the synthesis of a novel A-D-A-A'-type polymer, PDPP2F-NDI-N, via the green and efficient direct arylation polymerization (DArP) method. The multiple electron-deficient units in the backbone confer strong electron-withdrawing character, effective work function modulation, enhanced built-in potential, high crystallinity, and ordered molecular packing. PDPP2F-NDI-N exhibits a high electron mobility of 1.01 × 10⁻³ cm² V⁻¹ s⁻¹ and electrical conductivity of 3.13 × 10⁻³ S m⁻¹, facilitating efficient charge extraction and transport. Its interfacial modification capability suppresses interfacial defects and reduces non-radiative recombination losses. In ternary OSCs, PDPP2F-NDI-N achieves a high power conversion efficiency (PCE) of 20.44%, with outstanding thickness insensitivity retaining 92.8% of peak PCE at a 30 nm CIL thickness, and a T80 lifetime exceeding 1700 hours under photo-thermal aging. This work demonstrates that poly(A-D-A-alt-A') backbone design combined with DArP synthesis provides an effective strategy for developing high-performance, thickness-insensitive, and stable polymeric CILs, advancing efficient, stable, and scalable OSC applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4112-6
Radiostrontium remediation is crucial for ecological protection and sustainable development of nuclear energy. However, efficient removal of 90Sr from complex radioactive liquid waste, especially under acidic conditions, remains challenging due to material instability and intense proton competition. Herein, the rapid and highly selective capture of Sr2+ in neutral and even acidic solutions has been achieved by a layered potassium phosphatoantimonate KSbP2O8 with excellent radiation and thermal stability. Under neutral conditions, it possesses high maximum adsorption capacity (qmSr = 110.25 mg g−1), rapid adsorption kinetics (the removal rate (RSr) of 91.54% within 30 min), and excellent selectivity for Sr2+, and facile regeneration. Particularly, even under acidic conditions (pH 2.0), KSbP2O8 still maintains excellent Sr2+ removal capacity (qmSr = 79.38 mg g−1), fast kinetics, and high selectivity. A mechanism study by multiple characterizations reveals that the efficient Sr2+ removal of KSbP2O8 mainly stems from ion exchange between Sr2+ and interlayer K+ in KSbP2O8, which is attributed to the synergy between the Sb5+-induced Brønsted acidity and the high charge density of the anionic framework. This study demonstrates the exceptional capability of phosphatoantimonates to selectively capture Sr2+ under acidic conditions, highlighting the potential of phosphatoantimonates as effective scavengers for radiostrontium remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4200-0
Self-powered broadband photodetectors are pivotal for next-generation intelligent healthcare. Solution-processed mercury sulfide (HgS) is an attractive near-infrared absorber but is limited by interfacial instability, high defects, and sluggish response. Inspired by sulfur-mediated adhesion in Alhagi sparsifolia, a bioinspired interfacial engineering strategy employs an antimony sulfide (Sb2S3) interlayer to construct a bidirectional chemical bonding network. The Sb2S3 interlayer simultaneously forms Sb–O bonds with fluorine-doped tin oxide (FTO) substrates and Sb–S/Hg–S bonds with the HgS layer, thereby reinforcing interfacial adhesion, passivating coordination-unsaturated defect states, and establishing a type-II heterojunction with a strong built-in electric field. The resulting Sb2S3/HgS photodetector exhibits self-powered operation, broadband sensitivity spanning the visible to near-infrared region (642–1550 nm), an ultrafast response time of 2.47 ms, a detectivity up to 1.7 × 10^11 Jones, and retaining nearly constant photocurrent over 5000 continuous on-off switching cycles as well as prolonged air exposure. Beyond device-level performance, we demonstrate its utility in intelligent healthcare scenarios, including machine-learning-assisted liquid drug identification, binary-coded optical wireless communication, and high-fidelity photoplethysmography monitoring. This work establishes biomimetic bidirectional bonding as a generalizable paradigm for stabilizing solution-processed chalcogenide optoelectronics and accelerates the integration of self-powered broadband photodetectors into intelligent healthcare systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3696-3
The development of substitutable meniscus implants that can effectively protect articular cartilage remains a great challenge. Herein, a polyurethane with chemical crosslinking and sulfobetaine extenders containing hydrophobic chains (PU-CL-hSB) is developed, which could improve comprehensive properties and long-term stability simultaneously. By regulating the mole ratio of functional groups, PU-CL-hSB with appropriate mechanical properties, excellent tribological properties, and good fatigue resistance is used to prepare substitutable meniscus implant by hot-pressing. Due to the synergistic effect of functional groups, PU-CL-hSB meniscus implant presents comparable or even superior properties to native meniscus. It withstands a maximum force of 26.08 N versus 25.14 N for native meniscus, an energy dissipation from 45.93 to 39.17 N mm compared to 28.83 to 19.11 N mm for native meniscus over 300 cycles, and a friction coefficient from 0.08 to 0.19 compared to 0.11 to 0.26 for native meniscus. This PU-CL-hSB meniscus implant is further implanted into live rabbit knee joints for 8 and 25 weeks by a new approach, and in vivo data indicate that PU-CL-hSB meniscus implant not only protects articular cartilage from severe damage without eliciting inflammatory responses, but also can maintain normal physiological activities in the native state. Our findings present a substitutable meniscus implant that could be applied in vivo and propose evaluation methodologies for meniscus implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4217-y
Rational design and construction of effective photocatalysts is a promising way for green and sustainable chemistry, but still a great challenge. Herein, taking triphenylamine-containing aldehydes as reactants, two covalent triazine frameworks (CTFs), tris(4-formylphenyl)amine (TPA)-CTF and tris(4-formylbiphenyl)amine (TBPA)-CTF, were rationally constructed. The strong electron donor property of the triphenylamine moieties derived from the initial reactants and the strong electron acceptor nature of the in-situ formed built-in triazine rings in CTFs endowed these robust triphenylamine-based CTFs with donor-acceptor (D-A) or donor-π-acceptor (D-π-A) structure features. Photocatalytic experiments revealed that, compared with the controlled phenyl analogue CTF, 1,3,5-tri(p-formylphenyl)benzene (TFPB)-CTF, both of the triphenylamine-based CTFs exhibited superior photocatalytic activity not only in photocatalytic hydrogen peroxide generation, but also in photocatalytic aerobic oxidations of diverse organic substrates. Theoretical studies further confirmed that their enhanced photocatalytic performance should be attributed to their unique D-A or D-π-A features in the constructed triphenylamine-based CTFs. This work successfully demonstrated that rational selection of reactants containing electron donor moieties to construct CTFs should be a reliable way for the construction of effective photocatalysts for photocatalytic oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3712-2
Electrochemical potential and ion diffusion of electrode materials restrain the energy and power densities of lithium-ion batteries, and these challenges also remain in the intercalation-type Li3VO4 (LVO). In this work, the local [VO4] coordination symmetry in LVO is broken by a higher concentration of oxygen vacancies (Vö), resulting in an increased average V–O bond length and a larger ligand field splitting. These alterations reduce the energy level of the lowest unoccupied orbitals (e*) and lift the electrochemical potential, resulting in a higher voltage output. Additionally, the broken local symmetry in Vö-LVO is found to reduce the band gap and expand the ion transport channels, which favors enhancing electronic conductivity and facilitates ion diffusion, thereby improving the electrochemical kinetics in the energy storage process. The local symmetry broken sample (Vö-LVO) achieves a significantly improved capacity of 532 mAh/g at 0.1 A/g in comparison with 394 mAh/g of pristine LVO, and long cycling stability with retained capacity of 398 mAh/g at 1 A/g over 500 cycles compared with 236 mAh/g of the pristine LVO. The fundamental understanding paves the way to exploit high-performance electrodes via ligand field engineering for next-generation rechargeable batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3733-2
Irreversible sodium loss, primarily caused by solid electrolyte interphase (SEI) formation during initial cycling, significantly degrades the capacity of sodium-ion batteries by depleting active sodium. While pre-sodiation mitigates initial sodium loss, it fails to address continuous loss throughout the battery lifecycle. To overcome this limitation, we propose a sustained sodium compensation strategy utilizing activation-releasing systems. Key to this approach are high-capacity sodium compensators, Na2C2O4 and Na2C4O4, supported on a B and N co-doped Mo2C-W2C (MoW-C) heterostructure catalyst. This configuration enables efficient sodium release at charging voltages of 3.53 and 3.78 V, respectively. By integrating the sodium supplement agent onto the separator, and precisely controlling voltage and charge, multiple sodium replenishment is achieved over the entire battery lifecycle. This strategy reduces initial active sodium loss by 36.53%. Furthermore, a single activation during subsequent usage provides an additional 0.115 mAh cm−2 of active sodium. As a result, the cell exhibits exceptional cycling stability, with a capacity loss of only 0.059% per cycle over 350 cycles at 0.5 C.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3762-9
The integration of interfacial photothermal conversion and hydrovoltaic effects into bifunctional evaporators offers a promising route to simultaneously address freshwater scarcity and energy demands. However, the development of low-cost bifunctional evaporators and elucidation of the underlying co-generation mechanism remain challenging. Here, we report a porous carbon derived from waste polyester via a metal-organic framework (MOF)-assisted carbonization strategy, which is subsequently fabricated into a bifunctional evaporator for freshwater and hydroelectricity co-generation. The porous carbon exhibits a high specific surface area of 904 m² g⁻¹, hierarchical micro- and mesopores, and abundant oxygen-containing groups. The resulting evaporator demonstrates broadband light absorption, localized thermal management, good hydrophilicity, and high flexibility. Under 1 sun illumination, it achieves an open-circuit voltage of 250 mV, a short-circuit current of 14 μA, and an evaporation rate of 2.34 kg m⁻² h⁻¹, ranking among the most efficient freshwater-hydroelectricity co-generators. The weakened hydrogen-bonding network reduces the water evaporation enthalpy to 1.7 kJ g⁻¹. Mechanistic studies, including molecular dynamics simulations, reveal that selective Na⁺ interaction induces differential ion migration rates, generating a streaming potential. Additionally, the photothermal effect enhances voltage output by promoting interfacial ion concentration gradients. Outdoor tests confirm stable voltage output of 250 mV and freshwater production of 2.34 kg m⁻². This work provides a scalable platform for fabricating advanced evaporators from waste plastics and unravels the co-generation mechanism, offering a sustainable strategy to mitigate freshwater and energy crises.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3815-0
The development of bifunctional electrocatalysts capable of integrating biomass-derived platform molecule oxidation with organic reduction offers a promising strategy for simultaneously enhancing energy efficiency and generating high-value chemicals. However, designing catalysts that exhibit both high activity and stability in integrated systems remains a significant challenge. Herein, we report a self-supported electrode composed of nitrogen-doped carbonized wood (NCW) supported NiCo nanosheets (NiCo 0.3/NCW) that enables the electrocatalytic 5-hydroxymethylfurfural oxidation to produce 2,5-furandicarboxylic acid (FDCA) and the nitrobenzene reduction to yield aniline in an integrated electrochemical cell. The NiCo 0.3/NCW electrode achieves the production of FDCA and aniline at a low cell voltage of 1.7 V, with ~99% anodic and ~92% cathodic Faradaic efficiencies, respectively. Experimental characterizations disclose that the hierarchical porous NCW architecture promotes the dispersion of active sites, while nitrogen doping strengthens metal–support interactions. In-situ spectroscopic experiments combined with density functional theory (DFT) calculations reveal that cobalt incorporation tunes the electronic structure of nickel, thus optimizing substrate and intermediate adsorption, and lowering energy barriers. These effects ultimately enhance the performance of the natural wood-derived catalyst in integrated biomass valorization and selective organic electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3767-9
Progressive skin fibrosis ultimately results in irreversible contractures, causing both joint dysfunction and cosmetic deformity. The key pathological features of skin fibrosis include persistent inflammation and abnormal accumulation of the extracellular matrix (ECM), with epithelial-mesenchymal transition (EMT) playing a critical role in disease progression. However, current therapeutic strategies for cutaneous fibrosis are largely palliative and often require repeated interventions, with limited efficacy. Celastrol (Cel) exerts anti-inflammatory and anti-fibrotic effects in skin tissue, but its clinical application is limited by poor bioavailability and a narrow therapeutic window. Tetrahedral framework nucleic acid (tFNA), a novel nanocarrier system, exhibits multiple advantages, including enhanced cellular uptake, improved cell viability, and intrinsic anti-fibrotic and anti-inflammatory properties. Therefore, this study applied tFNA-Cel complex (TCC) as an advanced nanotherapeutic agent, designed to exert a synergistic anti-fibrotic effect. In this study, an in vitro model of skin fibrosis was established using human keratinocyte (HaCaT) cells treated with 5 ng mL−1 transforming growth factor beta (TGF-β) for 24 h. The results showed that TCC significantly inhibited EMT progression by reducing α-smooth muscle actin (α-SMA) levels and increasing E-cadherin level. Compared to tFNA or Cel alone, TCC exhibited superior anti-fibrotic effects in the fibrosis model, as evidenced by modulation of SMAD family member 2 (SMAD2) signaling and collagen I expression. Furthermore, the TCC group showed lower levels of nuclear factor κB p65 (NF-κB p65), BCL-2-associated X protein (Bax), and reactive oxygen species (ROS) compared to the Cel or tFNA groups. These findings highlight TCC as a promising treatment for skin fibrosis, with its synergistic anti-fibrotic effects providing new therapeutic avenues.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3728-5
Biological intelligence achieves exceptional energy efficiency and environmental adaptability, exemplified by the human brain's ~20 W resting power consumption. A key strategy is the use of multi-ions as signal carriers for transduction and processing. Iontronics, employing ions instead of electrons, offer a promising route to low-energy, heat-dissipation-free devices for memory, sensing, and neuromorphic computing. However, conventional iontronics require external voltage bias to drive ion motion, complicating miniaturization and integration. Here, we highlight a recent breakthrough by Guo et al. reporting a bias-free iontronic memory sensor ('memsensor') that operates by controlling surface ion migration. The device couples vanadium dioxide (VO2) with a low-work-function indium (In) patch. Upon immersion in NaCl solution, In3+ ions generated electrochemically within the Debye length are driven by the intrinsic surface electric field to diffuse into the VO2 surface, inducing an insulator-to-metal phase transition and a measurable, non-volatile change in surface conductance. This conductance state correlates with NaCl concentration and can be reversibly restored by H2O2 treatment. The memsensor emulates the gustatory plasticity of C. elegans, mimicking the response dynamics of ASEL and ASER neurons. In a proof-of-concept, a model boat equipped with the memsensor exhibits adaptive chemotaxis: after 'starvation' training in high NaCl concentration, it avoids high-concentration zones; conversely, after training in low concentration, it migrates toward high-concentration zones. This work demonstrates a bias-free strategy for programmable memory and sensing, potentially advancing autonomous microsystems and bioinspired electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3772-y
Conformal contact between functional electronic films and biological surfaces is critical for long-term device stability, high signal sensitivity, and favorable signal-to-noise ratio. Traditional transfer methods, such as soft stamps and pad printing, often involve mechanical pressing, leading to poor conformality, localized stress concentration, or structural failure. Alternative strategies, including geometric engineering of non-stretchable materials or using stretchable organic alternatives, mitigate these issues but increase design complexity and reduce fabrication efficiency. Here, we highlight a novel 'drop-printing' strategy introduced by Li et al. that leverages capillary force to manipulate a water droplet to pick up a thin film, transfer it to a target substrate, and print it onto the surface. As the droplet evaporates, the film conformally wraps the surface. The droplet acts as a lubricating layer, while interfacial liquid penetrating microstructures generates capillary pressure, facilitating shape-adaptive deformation and significantly reducing stress concentration. The final positioning and conformality are governed by droplet behavior on the target surface. This approach achieves positional deviation of less than 20 μm via regulation of three-phase contact lines. The strategy enables damage-free conformal wrapping of non-stretchable films onto three-dimensional biological surfaces, as demonstrated by drop-printed silicon microfilm conformally wrapping on a rat brain, with successful NIR laser stimulation triggering forelimb movement and synchronized brain electrophysiological signals. This gentle, high-precision method addresses the pressing need for low-stress conformal bioelectronics, offering a general solution for diverse biological interfaces.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61069-4
Four-directional dual-matrix C/C composites were fabricated from PAN-based carbon fibers using a combined approach of soft-hard hybrid weaving preform molding, chemical vapor infiltration (CVI) of pyrolytic carbon (PyC), and high-pressure impregnation and carbonization of pitch-derived carbon. The ablation resistance was evaluated in a dual-pulse solid rocket motor, and the ablation behavior was investigated. The carbon rods, formed by twisting and carbonizing fiber bundles, exhibited a hexagonal cross-section, surrounded by a dense PyC 'wall' structure. The linear ablation rates after pulse I and pulse II were 0.068 mm/s and 0.113 mm/s, respectively. A cellular-like PyC layer and nanowire structures were deposited on the surface of the throat convergent section during the post-combustion cooling phase, while cracks and delamination occurred on and within the divergent section. The ablation process involved ultra-high temperatures, high-speed gas scouring, oxygen-containing thermochemical ablation, and thermal shock. This work elucidates the ablation behaviors under dual-pulse conditions and provides technical guidance for designing C/C composites for extreme environments.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507110
Algal-derived taste and odor compounds (2-methylisoborneol, 2-MIB, and geosmin, GSM) in drinking water sources are poorly removed by conventional treatment. This study systematically evaluated the standalone and combined performance of ozone micro-nano bubbles (O3-MNBs) oxidation and powdered activated carbon (PAC) adsorption for removing 2-MIB, GSM, and algal cells from source water. Results showed that O3-MNBs pre-oxidation achieved >97.5% removal of odorants at 400 ng·L−1 and 67.2% algal cell removal within 30 min. When applied as a deep treatment stage, the degradation rate constant (k) was 10.1%–25.6% higher than in pre-oxidation due to lower background matrix interference. Both pre-oxidation and deep treatment reduced effluent concentrations of 2-MIB and GSM to below 10 ng·L−1, with oxidation kinetics fitting pseudo-first-order models (R²>0.95). PAC adsorption of both compounds followed pseudo-second-order kinetics (R²>0.99), with GSM equilibrium adsorption capacity approximately 20.0% higher than that of 2-MIB. In pure water, adsorption capacity increased by >10.0% compared to raw water. Based on kinetic models, a quantitative prediction method was established for O3-MNBs oxidation and PAC adsorption processes, aiming to achieve efficient odorant removal and cost optimization, providing theoretical support for advanced drinking water purification and smart water plant construction.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506019
Acidic in-situ leaching of sandstone-type uranium deposits leaves residual acid and uranium in groundwater, posing environmental risks. This study investigated the feasibility of loading hydroxyapatite (HAP) onto aquifer sandstone particles for in-situ remediation. Sandstone particles were collected from an aquifer and reacted with a HAP-generating solution for 52 days to produce sandstone/HAP composite. Batch experiments examined the effects of initial pH, initial uranium concentration, composite dosage, and interfering ions on uranium removal. Results showed successful HAP loading on sandstone surfaces. At initial pH 3, uranium concentration 5 mg/L, composite dosage 3 g/L, and 24 h reaction, uranium removal reached 95.6%. Interfering ions suppressed removal in the order Fe3+ > Mn2+ > Ca2+ > Mg2+ > SO4^2-. Removal mechanisms included electrostatic adsorption, ion exchange, and dissolution-reprecipitation, with good stability of immobilized uranium. This work validates the concept of in-situ HAP loading in aquifers and provides a basis for practical application in acidic uranium-contaminated groundwater remediation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506020
The rotary kiln roasting of lepidolite for lithium extraction faces challenges of unstable lithium conversion rates and high energy consumption. To address this, a multi-objective optimization method coupling improved neural network simulation with a multi-objective genetic algorithm was proposed, targeting the synergistic optimization of lithium conversion rate (TRLi) and natural gas consumption intensity (EIng). Using long-term industrial time-series data of batching parameters and kiln operating variables, back-propagation (BP) neural network and its particle swarm optimization (PSO) improved variant were developed to model TRLi and EIng. The PSO-BP model demonstrated superior accuracy in capturing the complex nonlinear relationships, reducing mean absolute percentage errors (MAPE) to 0.278 and 0.284 for TRLi and EIng, respectively. Subsequently, the non-dominated sorting genetic algorithm II (NSGA-II) was employed to construct a multi-objective optimization model, yielding a Pareto-optimal set of process parameters that maximize TRLi and minimize EIng. The results revealed that under NSGA-II optimized conditions, TRLi could be stabilized between 82.45% and 87.96%, an average increase of 3.61 percentage points over baseline operations, while EIng could be reduced to 53.7 m3 per ton of clinker. For an annual processing capacity of 3.2×105 tons of lepidolite concentrate and sulfate mixture, this corresponds to an additional 127.1 tons of lithium metal recovery, a reduction of 1,964,912 m3 in natural gas consumption, and a decrease of 3,763.84 tons in CO2 emissions annually. This study provides theoretical and technical support for the green, high-quality, and low-carbon supply of critical raw materials for the lithium battery new energy industry.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112804
The rapid dissemination of antibiotic resistance genes (ARGs) in aquatic environments poses serious threats to public health and environmental safety under the 'One Health' framework. Nanoplastics (NPs), as co-occurring pollutants, can exacerbate ARG risks by promoting horizontal gene transfer (HGT), yet the influence of different functional groups on extracellular ARG (eARG) transformation remains unclear. This study investigated the effects of carboxy-modified polystyrene NPs (PS-COOH) and amino-functionalized polystyrene NPs (PS-NH2) compared to unmodified polystyrene NPs (PS) on the transformation of the extracellular resistance plasmid IE-V1955 (carrying an ampicillin resistance gene) into Escherichia coli DH5α. Results showed that PS-COOH exposure promoted plasmid transformation similarly to PS, with effects increasing over 0.1–20 mg·L−1. Low concentrations (0.1–0.5 mg·L−1) of PS-NH2 also enhanced transformation, with stronger effects than PS-COOH at equal doses, whereas high concentrations (1–20 mg·L−1) inhibited it. Mechanistically, PS-COOH (0.1–20 mg·L−1) and low PS-NH2 induced intracellular reactive oxygen species (ROS), increased cell membrane permeability, elevated the protein-to-polysaccharide ratio in extracellular polymeric substances (EPS), and promoted biofilm formation, thereby facilitating transformation. High PS-NH2 concentrations caused excessive ROS leading to cell lysis and formed aggregates with plasmids larger than membrane pores, blocking uptake. These findings provide a theoretical basis for assessing the combined environmental health risks of NPs and ARGs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010203
The production and disposal of lithium batteries release not only hazardous metals and particulates but also substantial amounts of harmful organic pollutants. This study focuses on N-methyl-2-pyrrolidone (NMP) to investigate the environmental release and human exposure of organic pollutants throughout the lithium battery lifecycle. Using liquid chromatography-high-resolution mass spectrometry (LC-HRMS), NMP was quantified in environmental samples from battery production and dismantling facilities, as well as in pyrolysis products from simulated thermal recovery of mainstream lithium batteries. Key release stages were identified: slurry mixing and coating/drying during production; shredding, electrolyte volatilization, and high-temperature pyrolysis during disposal. In unprotected occupational settings, estimated NMP exposure via dust ingestion exceeded reference doses, underscoring the need for health impact assessments and evaluation of protective measures. This research provides critical insights into the environmental release and population exposure of organic pollutants across the lithium battery lifecycle, informing health policy for vulnerable populations.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604012
A newly constructed wastewater treatment plant with a design capacity of 100,000 m3/d receives influent containing approximately 15% industrial wastewater, resulting in water quality and quantity fluctuation coefficients of 1.2–1.5, refractory organic matter (as COD) exceeding 35% of total COD, and a total nitrogen (TN) concentration up to 55 mg/L. To ensure stable effluent compliance and enhance shock resistance, a modified Bardenpho process was implemented, integrating multi-point influent distribution, post-anoxic and post-aerobic zones, and supplemented with an equalization basin, high-efficiency sedimentation tank, and denitrifying deep-bed filter. During commissioning and operation, the process achieved average removal efficiencies of 96.10% for COD, 98.24% for NH3-N, 83.89% for TN, and 98.29% for TP. Effluent concentrations stabilized at 15.4 mg/L COD, 0.57 mg/L NH3-N, 7.94 mg/L TN, and 0.12 mg/L TP, consistently meeting the Class 1A standard of GB 18918—2002. The modified Bardenpho process demonstrates strong adaptability and stability for treating wastewater with high nitrogen and refractory organic loads, improving carbon source utilization and reducing energy consumption. Design parameters and operational experience provide valuable references for similar municipal plants, particularly those receiving significant industrial wastewater fractions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3599-5
Layered transition metal tellurides (TMTs) are promising cathode materials for aqueous zinc ion batteries (AZIBs) due to their graphite-like layered structure and weak van der Waals interactions, which facilitate rapid ion transport. However, their holistic performance—specific capacity, rate capability, and cycling stability—remains insufficient for practical applications. Here, we report a straightforward NaBH4-assisted chemical etching method to introduce abundant Te vacancies on the surface of Bi2Te3 (denoted H-Bi2Te3). Experimental and theoretical analyses reveal that these Te vacancies refine the band structure, enhance electrical conductivity, and significantly reduce the diffusion barrier for Zn2+ ions. Additionally, the vacancies provide increased storage sites for Zn ions. Consequently, H-Bi2Te3 exhibits superior zinc storage performance: a high Zn2+ diffusion coefficient of 3.98×10−11 cm2 s−1, a specific capacity of 325 mAh g−1 at 0.1 A g−1, a rate capability of 217 mAh g−1 at 1 A g−1, and exceptional cycling stability with 70 mAh g−1 retained after 10,000 cycles at 1 A g−1. This work introduces a novel vacancy defect engineering strategy for TMT-based cathodes in AZIBs and expands the potential applications of vacancy-rich TMT materials.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61093-1
Advanced catalyst structures with good active site accessibility and strong metal-support interactions are crucial for oxygen reduction reaction (ORR) catalysis. A hierarchically porous Pt catalyst supported on honeycomb-like nitrogen-doped carbon (Pt/HNC-400, where 400 denotes the optimal dosage (mg) of the sacrificial SiO2 hard template used during synthesis) was fabricated by combining template-assisted pyrolysis and alcohol reduction. The fabrication involves the template-assisted pyrolysis of ZIF-67 (which provides the N-dopant through its 2-methylimidazole ligand) followed by HF etching to completely remove the SiO2, yielding a 3D interconnected porous carbon support. Compared to a commercial Pt/C, it had an exceptional ORR performance with a half-wave potential of 0.901 V (41 mV higher), a mass activity at 0.9 V that was 15.3 times higher, and significantly improved durability (a half-wave potential decay of 25 mV vs. 80 mV after 10,000 accelerated durability tests (ADTs)). Mechanistic investigations showed that this superior performance is due to the combined effects of the 3D porous structure, ultrafine Pt nanoparticles with strong metal-support interactions, and in-situ formed Co-Nx moieties from the pyrolysis of precursor ZIF-67. After 10,000 ADTs it was shown to have excellent structural integrity, retaining 87.4% of its initial electrochemically active surface area (102.7 m2 g−1). This study may assist the development of new high-performance ORR catalysts.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508053
Polycyclic aromatic hydrocarbons (PAHs) in industrial soils pose significant risks due to their hydrophobicity and low bioavailability, limiting the efficacy of bioremediation. This study investigated the enhancement of an in-situ electrokinetic-biological barrier (EK-BB) system for PAH-contaminated soil using biosurfactants. Three biosurfactants—rhamnolipid (RL), alkyl polyglycoside (APG), and saponin (SAP)—were applied individually and in combinations at 10× critical micelle concentration (CMC), and the optimal RL+APG mixture was further tested at 2.5, 5.0, 7.5, and 10× CMC. Results showed that biosurfactant application improved soil electrical current, moisture retention, and PAH removal. Combined surfactants outperformed single ones, with the 10× CMC RL+APG treatment (Exp IV) achieving the highest average current intensity and moisture content, 1.31 and 1.12 times that of the control (CK), respectively, and a PAH removal of 106.02 mg·kg⁻¹. Biosurfactants also promoted bacterial growth in both contaminated soil and the biobarrier layer; the 10× CMC RL+APG treatment increased bacterial counts by 6.24-fold and 44.8%, respectively. However, excessive surfactant concentrations led to PAH accumulation in the biobarrier and clean soil. The 5× CMC RL+APG treatment provided optimal balance, maximizing PAH removal while maintaining barrier effectiveness. These findings confirm that appropriate biosurfactant concentrations can enhance EK-BB remediation, offering technical support for PAH-contaminated site remediation and safe reuse.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011804
Per- and polyfluoroalkyl carboxylic acids (PFCAs) are persistent organic pollutants whose isomers exhibit distinct environmental behaviors, bioaccumulation potentials, and toxic effects due to structural variations. Accurate identification of PFCA isomers is critical for risk assessment and pollution control, yet existing detection methods predominantly rely on standard references, posing challenges for precise analysis of isomers with subtle structural differences. Single-molecule electrochemical sensing via nanopores offers a standard-free approach by correlating molecular volume with current blockade, but its capability to distinguish PFCA isomers remained unverified. This study targeted three sets of PFCA isomers: 4,5,5-trifluoropent-4-enoic acid vs. 4,4,4-trifluoro-3-methylbut-2-enoic acid; 3,3,3-trifluoro-2-methylpropanoic acid vs. 4,4,4-trifluorobutanoic acid; and 2-(trifluoromethoxy)acetic acid, 3,3,3-trifluorolactic acid, and (2R)-3,3,3-trifluoro-2-hydroxypropanoic acid. By engineering nanopore interfaces (WT, R220N, R220Q Aerolysin) and extracting multi-dimensional characteristic parameters, the method achieved near 100% accuracy in identifying all seven isomers. Feature selection further enabled high classification accuracy with low data volumes, laying the foundation for rapid single-molecule detection of PFAS and other emerging contaminants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3822-y
Precise control over supramolecular chirality and circularly polarized luminescence (CPL) is achieved through fluorene-content engineering of alkylated fluorene-quinoxaline copolymers. By systematically varying the fluorene ratio, three polymers (F8QX, F8QX-II, F8QX-III) are synthesized and co-assembled with a chiral inducer (R/S-5011). Thermal annealing induces highly ordered, crosslinked superstructures with strong chiroptical activity, where the dissymmetry factor (g_lum) decreases with increasing fluorene content. The optimal system, (F8QX)0.7-(R/S-5011)0.3, achieves a high |g_lum| of 0.52. Structural analyses and molecular dynamics (MD) simulations reveal that lower fluorene ratios facilitate tighter π–π stacking and more efficient chirality amplification. This system further serves as an excellent host for a narrowband multi-resonance thermally activated delayed fluorescence (TADF) emitter (DBN-ICZ) via Förster resonance energy transfer, yielding ternary co-assemblies with narrowband green emission (FWHM = 25 nm) and strong CPL with g_lum of 0.43. Circularly polarized organic light-emitting diodes (CP-OLEDs) based on (F8QX)0.7-(R/S-5011)0.3-(DBN-ICZ)0.005 exhibit yellow circularly polarized electroluminescence with |g_EL| value of 0.12. This work provides a comprehensive strategy integrating molecular design, hierarchical assembly, and energy transfer toward high-performance chiral optoelectronic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3850-3
Chiral nanomaterials have attracted considerable attention for antibacterial applications due to their unique chiroptical properties. Here, we report a novel spatiotemporally precise synergistic photodynamic therapy (PDT) and photothermal therapy (PTT) strategy using circularly polarized light (CPL)-activated chiral molybdenum-doped carbon dots (L-Mo-CDs and D-Mo-CDs). These chiral carbon dots were synthesized using chiral tartaric acid as a precursor. Notably, D-Mo-CDs selectively respond to left-handed CPL (LCP), while L-Mo-CDs respond to right-handed CPL (RCP). Under CPL irradiation, D-Mo-CDs exhibit enhanced reactive oxygen species (ROS) generation and a higher photothermal conversion efficiency (PCE) compared to L-Mo-CDs. In vitro antibacterial assays demonstrate that D-Mo-CDs possess excellent bactericidal efficacy against both Gram-positive and Gram-negative bacteria. In vivo wound healing studies in a mouse model reveal remarkable therapeutic efficacy, attributed to reduced inflammation, accelerated angiogenesis, and enhanced collagen deposition. This work introduces a paradigm for utilizing chiral carbon dots in precision antibacterial therapy, addressing the limitations of conventional chiral nanomaterials such as poor biocompatibility and low photothermal conversion. The findings underscore the potential of metal-doped chiral carbon dots for advanced biomedical applications, offering a spatiotemporally controllable approach to combat bacterial infections without promoting resistance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3933-9
The global cold chain consumes vast amounts of energy and emits greenhouse gases, while many regions lack proper refrigeration. To address this, we developed a dual-layer electrospun membrane (PZ-PML) for energy-free fruit preservation. The top PVDF-HFP/ZIF-8 layer offers 97.64% solar reflectance and 92.5% mid-infrared emissivity, providing 70 W/m2 radiative cooling. The bottom PAN/MIL-101/LiCl layer, with 2.18 g/g water uptake at 80% RH, delivers ~156 W/m2 evaporative cooling, lowering surface temperature by 6.1 °C under ~400 W/m2 irradiation. The membrane also shows ≥99% antibacterial efficiency against E. coli and S. aureus. Applied to strawberries, it reduced dehydration to 20.2% after 9 days, compared to 68.2% and 74.4% in controls. Additionally, it demonstrates durability, superhydrophobicity, and UV stability. This scalable solution offers energy-free fruit cooling, reducing postharvest losses while maintaining quality and safety.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3763-9
Developing near-infrared (NIR) organic phototheranostic agents with aggregation-induced emission (AIE) is crucial for precise diagnosis and synchronous cancer treatment by regulating excited-state energy dissipation. However, the distorted molecular configuration of AIE systems poses a challenge to achieving both high fluorescence quantum yield (QY) and large molar extinction coefficient (ε). Herein, a series of donor-acceptor-donor (D-A-D) AIE small molecules with bright NIR emission and high photothermal conversion efficiency (PCE) were developed through an acceptor planarization and donor rotation molecular engineering strategy. Upon encapsulation into water-dispersible nanoparticles (NPs), SVD NPs exhibited strong molar absorptivity (ε = 3.92 × 10^4 M^-1 cm^-1), high QY of 4%, and improved photothermal performance (PCE × ε = 2.2 × 10^4), enabling effective NIR fluorescence imaging-guided phototherapy for successful ablation of subcutaneous tumors. This study offers valuable insights into the simultaneous enhancement of bright NIR luminescence and exceptional photothermal performance in AIE phototheranostic agents, propelling advancements in tumor diagnosis and treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606017
Against the backdrop of global green transition and tightening resource constraints, China's Dual Carbon Goals and Zero-Waste City initiative have positioned waste valorization as a critical pathway for sustainable development. Zinc, a fundamental metal, faces high external dependence and nearing primary resource limits, making the regenerated zinc industry essential. However, the previous standard YS/T 1093-2015 lagged in classification, technical indicators, and environmental requirements. This paper analyzes the revision to YS/T 1093-2024, which renames the standard to 'Recycled Zinc Raw Materials' and clarifies its role as front-end smelting intermediate feedstock. The new standard establishes a classification system covering six typical zinc-bearing materials, expanding utilization of low-grade complex materials (zinc content 5%-15%). It tightens limits on harmful elements (fluorine, chlorine, lead, arsenic) and introduces moisture control and appearance evaluation indicators, enhancing operability and environmental risk control. Compared with EU standards, it shows systematic improvements in raw material coverage, process adaptability, and environmental risk prevention. The revision is expected to drive the regenerated zinc industry toward intensification, high-value utilization, and clean production, improving resource recycling efficiency and supporting China's zinc resource strategic security and low-carbon development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3864-4
Organic room temperature phosphorescence (RTP) materials, particularly those emitting in the near-infrared (NIR) region, hold great promise for bioimaging due to their deep-tissue penetration and minimal autofluorescence interference. However, achieving efficient NIR RTP with long lifetimes remains challenging due to inefficient triplet exciton utilization. Herein, we propose a dark triplet state activation strategy to achieve efficient NIR RTP by leveraging host–guest energy transfer. Using benzophenone derivatives (BP, OBP, MBP, PBP) as rigid host matrices with high intersystem crossing (ISC) efficiency and an NIR fluorophore (MPTCF) as the guest, we achieve efficient Dexter-type triplet-triplet energy transfer (TTET) that converts non-emissive host triplets into guest-centered NIR phosphorescence. Systematic optimization of the host–guest system has shown that PBP/MPTCF exhibits exceptional performance, including long phosphorescence centered at 705 nm, an ultralong phosphorescence lifetime (210.3 ms), and high ISC efficiency (44.4%). When fabricated into nanoparticles (NPs), PBP/MPTCF exhibits superior performance, featuring prolonged phosphorescence signals (>120 s), deep tissue penetration capability (>2 mm), and excellent biocompatibility (cell viability >95% at 300 μM). In addition, this system enables high-contrast subcutaneous imaging with excellent dispersibility and stable in vivo imaging capability. More importantly, PBP/MPTCF NPs demonstrate precise lymph node mapping through time-gated phosphorescence imaging and efficient tumor visualization within 4 h post-injection with a high tumor-to-liver ratio of 2.8. The successful activation of dark triplet states through this host–guest approach provides a general design principle for developing high-performance NIR RTP materials, while the demonstrated biomedical applications highlight their significant potential for advanced bioimaging and precision diagnostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3842-8
The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022502
This study investigates the effects of different land use types on topsoil carbon (C) and nitrogen (N) contents and their spatial distribution in the lower reaches of the Sancha River Basin, a karst region of the Yunnan-Guizhou Plateau. Grid sampling collected 0–20 cm topsoil from forestland (n=23), cultivated land (n=25), and grassland (n=32). Total C and N were measured. Results showed that topsoil C content followed grassland (40.36±22.92 g·kg−1) > forestland (37.05±12.83 g·kg−1) > cultivated land (34.06±14.57 g·kg−1), while N content followed forestland (2.89±0.76 g·kg−1) > grassland (2.67±1.19 g·kg−1) > cultivated land (2.50±0.65 g·kg−1). One-way ANOVA revealed no significant differences among land use types (P>0.05). Soil C and N were significantly positively correlated across all land uses (r>0.5, P<0.001). Coefficient of variation (CV) indicated grassland had the highest C variability (0.57), while forestland showed the most stable C and N (CV=0.35 and 0.26, respectively). Cultivated land had CVs of 0.43 for C and 0.26 for N. Spatially, forestland exhibited concentrated high C values with significant N heterogeneity; grassland had higher C in southern and eastern areas but scattered distribution, with generally low and variable N; cultivated land showed uniform but lowest C and N. Land use types significantly drive topsoil C and N dynamics through vegetation input, soil disturbance, and management practices, underscoring the importance of rational land use planning for enhancing carbon sink functions and sustainable development in karst watersheds.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607020
Kitchen waste (KW) and excess sludge (ES) are urban biowastes with resource recovery potential, commonly treated via anaerobic digestion (AD) for methane production. However, KW mono-digestion suffers from acidification, while ES yields low methane. This study employed semi-continuous reactors to simulate practical AD, co-digesting KW and ES at a 4:1 volatile solids ratio with biochar addition (0.5, 1.0, 2.5, 5.0, 10.0 g/L). The optimal biochar dosage was 2.5 g/L, achieving cumulative biogas and methane volumes of 17.53 L and 11.63 L, respectively, representing 42.10% and 39.47% increases over the biochar-free control, and 34.45% and 43.30% enhancements relative to thermally hydrolyzed sludge. The methanogenic lag phase decreased from (5.65±0.11) d to (4.33±0.12) d. Process stability improved, with average volatile fatty acids (VFAs) during stable operation dropping from 1708 mg/L to 1033 mg/L. Microbial analysis revealed enhanced diversity and enrichment of Synergistetes and Syntrophomonas, indicating direct interspecies electron transfer (DIET) promotion. Biochar at low concentrations enhances AD by immobilizing microbes and facilitating electron transfer, while high concentrations (10 g/L) may inhibit methanogenesis due to fatty acid degradation blockage, yet total methane production remained above control. These findings demonstrate that biochar addition at 2.5 g/L effectively enhances methane production and process stability in KW-ES co-digestion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3905-9
Heteroatom doping is a widely adopted strategy to enhance the electrocatalytic activity of transition metal compounds, yet the intrinsic role of dopants beyond conventional electronic effects remains unresolved. This study reveals a missed heteroatom-doping effect using a graphene-supported Co-doped FeS2 catalyst for the oxygen evolution reaction (OER). Comprehensive characterization and in situ Raman spectroscopy demonstrate that Co incorporation disrupts S–S bond symmetry and orbital matching within FeS2, generating abundant S2− species that accelerate surface reconstruction into active FeOOH under electrochemical conditions. After reconstruction, Co atoms remain integrated within the FeOOH lattice, upshifting its d-band center and optimizing oxygen intermediate adsorption, as confirmed by theoretical calculations. This dual functionality of Co dopants—facilitating rapid reconstruction in the pre-catalyst and modulating the electronic structure of the active phase—provides novel mechanistic insights into dopant-induced dynamic reconstruction for electrocatalysis. The findings challenge the conventional understanding of doping effects and offer a rational design principle for Fe-based OER electrocatalysts, potentially lowering overpotentials and improving stability for practical water splitting.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60762-1
The CO2 dry reforming of methane (DRM) is pivotal for CO2 utilization within the dual-carbon framework, offering advantages in carbon reduction and value-added chemical production. However, shaped catalysts suitable for industrial-scale DRM remain limited. This work constructs a monolithic catalyst using honeycomb cordierite as the structural support, systematically investigating the effects of organic and inorganic binders on coating structure and catalytic performance. Comparative studies reveal that the active coating fabricated with inorganic aluminum sol exhibits a continuous uniform morphology and excellent adhesion strength. During high-temperature calcination, elemental diffusion within Al2O3 networks bridges the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This creates robust metal-support interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provides superior pore confinement, contributing to strong coating adhesion, enhanced activity, and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, coatings derived from inorganic silica sol suffer from detachment and activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrate inferior performance in macroscopic coating uniformity, adhesion strength, mesoporous confinement, and localized electronic effects, resulting in the poorest catalytic performance. By optimizing aluminum sol coating parameters—binder content, active component dosage, and coating cycles—a synergistic balance between coating thickness and mass transfer is achieved. The optimized catalyst demonstrates excellent DRM performance, providing insights for constructing high-performance shaped catalysts with cordierite coatings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3994-9
Electrokinetics, the study of charge transfer and mass transport under electric fields, is fundamental to advancing energy storage and electrocatalysis. Organic-inorganic composite materials synergistically combine the structural stability and conductivity of inorganic phases with the functional diversity of organic components, optimizing electrokinetic properties such as charge transfer, ionic mobility, and catalytic activity. This review systematically examines the intersection of electrokinetic phenomena and organic-inorganic composites, focusing on fundamental principles, design strategies, and performance optimization. Advanced materials including metal-organic frameworks (MOFs), organic-carbon hybrids, and single-atom catalysts are highlighted, with applications spanning batteries, fuel cells, wearable devices, and electrocatalytic systems. Emphasis is placed on advanced in situ and operando characterization techniques that probe electrokinetic processes, revealing the interplay between structure, interface, and transport dynamics. By bridging electrokinetic theory and material design, this work provides a roadmap for developing next-generation materials for sustainable energy technologies. The review consolidates recent progress, identifies remaining challenges, and proposes future directions for leveraging electrokinetic principles to achieve high-efficiency, durable energy systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4056-1
Nanoparticle-based therapeutics have been intensively explored for tumor treatment. However, developing convenient and specific strategies that do not rely on exogenous energy-guided activation remains challenging. Herein, an ion-exchange-driven chemodynamic therapy is proposed based on the TME K+-mediated cation exchangeability of layered ferrous silicates (LFSs). LFSs were prepared by a facile "in situ 3D-to-2D structural transformation" strategy through valence bond transition from SiO–H–OSi to Fe–O, providing extensive convenience compared to conventional exfoliation methods. The structure-activity relationship and mechanism between surrounding TME ions and the cation exchange behavior of LFSs were revealed by both experimental investigation of the cation-exchange process and DFT calculations of the adsorption hydration behavior. As a result, the interlayered Fe ions were selectively and preferentially exchanged by TME K+ rather than surrounding TME Na+, Mg2+, Ca2+, or Cl−, thereafter activating specific Fenton reaction together with TME H+, H2O2, and glutathione, demonstrating highly precise catalytic therapeutic efficacy both in vitro and in vivo. This study proposes an original tumor-specific therapy modality with high precision and safety through taking advantage of ionic exchangeability of layered silicate, and provides enlightenment to reverse the TME K+ disorder.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4072-3
All-inorganic, hole-transport-material-free (HTM-free), carbon-based perovskite solar cells (C-PSCs) have attracted significant attention due to their exceptional stability and low cost. However, their performance and commercial potential are constrained by poor interfacial contact, insufficient crystallinity, and energy level misalignment. In this work, we address these challenges via a molecular engineering strategy by introducing tetrakis(4-ethynylphenyl)methane (TEPM) as a multifunctional additive. The alkynyl moiety (C≡C) in TEPM coordinates with Pb2+ ions in perovskite precursors, synergistically slowing crystallization kinetics to regulate crystal growth and passivate deep-level defects. Consequently, CsPbI3 films exhibit larger grain sizes, improved crystallinity, and lower defect densities. Devices modified with TEPM achieved a record power conversion efficiency (PCE) of 20.01% (certified 19.58%). Additionally, unencapsulated devices retained 87.6% of their initial efficiency after 1080 h under ambient conditions (25 °C, 30% relative humidity), and maintained 94.0% of their initial efficiency after 730 h of continuous AM 1.5G illumination in air. This work sets a new efficiency benchmark for inorganic HTM-free C-PSCs and provides a versatile molecular engineering strategy for developing high-performance, stable perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4125-8
Perovskite solar cells (PSCs) require advanced interfacial modification materials to mitigate defects and ion migration that limit efficiency and stability. This study presents a low-cost, highly efficient screening methodology based on density functional theory (DFT) calculations to identify superior interface modifiers. The effectiveness of this method is experimentally validated. Methyl 1H-1,2,4-triazole-3-carboxylate (TZMC) is screened as a superior molecule that simultaneously passivates perovskite defects and suppresses ion migration through a synergistic effect: coordination with Pb2+ via carbonyl oxygen and imidazole nitrogen, and stabilization of I− via N–H···I hydrogen bonding. This mechanism reduces non-radiative recombination, enhancing both open-circuit voltage (VOC) and fill factor (FF). TZMC-modified PSCs achieve a champion power conversion efficiency (PCE) of 25.44% and significantly improved operational stability under continuous illumination and resistance to water/oxygen. Comprehensive characterization confirms reduced defect density and increased ion migration barriers. This work demonstrates the success of DFT-guided design in advancing interfacial modification materials for high-performance PSCs, transforming interface engineering from trial-and-error to rational design and providing a framework for high-throughput screening.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4026-0
Copper-based synergistic therapy integrating chemodynamic therapy (CDT) and cuproptosis holds promise for tumor treatment but faces clinical translation hurdles including long-term toxicity, low catalytic efficiency, off-target effects, and copper ion efflux. Here, we developed metabolizable ultrasmall benzothiazole-based covalent organic framework nanodots (COF NDs) via click condensation followed by liquid exfoliation. The dense donor-acceptor configurations confer a high photothermal conversion efficiency of 51.16%, while bisthiazole motifs enable specific Cu2+/Cu+ chelation (0.56:0.44), facile PEGylation, and mitochondrial targeting. These features enhance physiological stability and enable tumor-specific photothermal-catalytic synergy. Mitochondrial accumulation elevates intracellular copper to a critical threshold, inducing cuproptosis and suppressing tumor growth and metastasis. The NDs are efficiently excreted via renal and fecal pathways, demonstrating favorable biocompatibility and clinical potential as copper-based nanotherapeutics.