SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4292-4
The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4179-x
Perylene diimide (PDI) radical anions exhibit poor environmental stability, restricting their generation efficiency and practical application. Here, a PDI-functionalized bispillar[5]arene (PDI-P5) was designed to construct stable and high-efficiency photothermal radicals. Intramolecular charge transfer (ICT) between PDI and bispillar[5]arene narrows the energy gap. Under 455 nm ultraviolet light irradiation and diethylamine (DEA) vapor exposure, photoinduced electron transfer (PET) efficiently generates PDI-P5·− radicals, which possess broad near-infrared (NIR) absorption, enhanced non-radiative transitions, and excellent stability. Notably, PDI-P5·− can rapidly reach 90 °C under 0.20 W cm−2 simulated sunlight irradiation. Moreover, it exhibits superior multi-step photothermal anti-counterfeiting performance. This work provides a novel strategy for the development of stable radical-based photothermal materials, which holds great potential for anti-counterfeiting and bioimaging applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3775-3
The urgent imperative for carbon-neutral chemical production has accelerated the development of solar-driven catalytic technologies that convert abundant C1 feedstocks (CO2 and CH4) into value-added C2+ molecules. Standalone photocatalysis remains constrained by rapid charge-carrier recombination and poor C–C coupling selectivity. This review critically examines multi-field-coupled catalysis—a transformative paradigm synergistically integrating solar energy with auxiliary thermal, electric, and magnetic fields. Through mechanistic dissection of photothermal, photoelectrochemical, and photomagnetic field cooperativities, it is summarized that thermal gradients attenuate phonon scattering to enhance charge-carrier drift mobility while vibrationally stabilizing reactive intermediates, electric potentials drive vectorial charge transport via Coulomb-force-directed separation and band alignment, and magnetic fields modulate spin-selective electron transfer through Zeeman splitting-mediated polarization to boost reaction specificity. This synergistic multi-field integration circumvents intrinsic limitations of single-mode photocatalysis by collectively reconfiguring reaction coordinates for selective C–C coupling. We further address persistent challenges in resolving ultrafast interfacial charge-transfer dynamics, scaling integrated field reactors for industrial deployment, and advancing in situ operando characterization of multiscale processes. Strategic research priorities are proposed to advance sustainable multi-field-coupled catalytic production of fuels and platform chemicals.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3676-3
Perovskite solar cells (PerSCs) have achieved remarkable efficiencies, yet their performance is limited by defect states and non-radiative recombination. Here, pyromellitic diimide (PD) is introduced as an additive to passivate bulk defects in perovskite films. PD forms hydrogen bonds with formamidinium (FA+) ions and coordinates with Pb2+ ions, effectively suppressing non-radiative recombination and reducing energy loss. The PD-treated perovskite films exhibit enhanced crystallinity and uniformity. Consequently, 1.55 eV PerSCs achieve a high open-circuit voltage (VOC) of 1.193 V and a power conversion efficiency (PCE) of 25.79%. Moreover, unencapsulated PD-treated devices retain 96% of their initial efficiency after 2000 h under nitrogen atmosphere, whereas control devices retain only 74%. Under ISOS-D-2I accelerated aging (65±5°C in N2), PD-treated devices show less than 5% PCE attenuation after 288 h, compared to ~30% for controls. This work provides a viable strategy for defect passivation in perovskite solar cells, enhancing both efficiency and stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3677-9
The demand for high-performance scintillators in high-temperature applications, such as industrial flaw detection and oil exploration, necessitates materials with both high efficiency and thermal robustness. This work reports Tb3+-doped oxyfluoride glass scintillators exhibiting anti-thermal-quenching radioluminescence (RL). Three synergistic strategies were employed: (i) an oxyfluoride glass host providing a low-phonon-energy environment, (ii) increased structural densification of the glass network, and (iii) thermally enhanced energy transfer from Ce3+ to Tb3+. The resulting scintillators achieve an optical transmittance exceeding 88% at 542 nm, a record RL intensity of 350% relative to a standard Bi4Ge3O12 (BGO) crystal, and an imaging resolution of 24 lp mm−1. Notably, the RL intensity at 633 K reaches 143% of its room-temperature (303 K) value, demonstrating significant anti-thermal-quenching behavior. In contrast, commercial BGO and CsI:Tl scintillators exhibit RL intensities dropping to approximately 1% under identical conditions. These results establish the potential of Tb3+-doped glass scintillators for high-temperature X-ray imaging and provide a strategic framework for developing thermally robust scintillating materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3642-4
High-density glass scintillators are promising alternatives to crystals for next-generation radiation detection due to their low cost, excellent physical and chemical stability, and processability. In this study, a series of Ce3+-activated gadolinium gallium borosilicate (GGBS x) glasses were synthesized via vacuum melt-quenching. With increasing Gd2O3 content, glass density increased from 5.86 to 6.05 g/cm3, and molar volume from 36.43 to 39.79 cm3/mol. Extended X-ray absorption fine structure (EXAFS) analysis revealed that in GGBS 1 glass, Ce3+ exclusively adopts a hexahedral [CeO6] configuration, while Gd3+ exhibits both hexahedral and octahedral coordination with a bond length of 2.35±0.1 Å and Debye-Waller factor σ2 of 0.0122±0.0015 Å2. As Gd2O3 content increased, shallow trap depth rose from 0.804 to 0.858 eV, while deep trap depth first increased from 0.948 to 1.434 eV then decreased to 1.010 eV. GGBS 1 glass exhibited high transmittance (~80%) in the visible range and a photoluminescence quantum yield of 78.4%. Under X-ray irradiation, its X-ray excited luminescence intensity reached 128.5% of that of Bi4Ge3O12 (BGO) crystal, with a spatial resolution of 29.1 lp/mm, approaching the highest reported for glass scintillators. Under γ-ray excitation, it achieved a light yield of 1058 photons/MeV and an energy resolution of 23.7% at 662 keV. These results indicate that GGBS 1 glass scintillator warrants further development for applications in X-ray imaging and γ-ray spectroscopy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3503-9
This correction addresses an image misuse in the original publication (Sci China Mater, 2025, 68(6): 2095, DOI: 10.1007/s40843-025-3311-6). Specifically, a fluorescent image in Fig. 4d, depicting live/dead cells after treatment with MPDA@TMZ without laser irradiation, was erroneously presented. The corrected Fig. 4 is provided, and the authors confirm that the results and conclusions of the original paper remain unaffected. The correction ensures the integrity of the reported data, particularly the cell viability and apoptosis assays. The study focuses on mesoporous bowl-shaped polydopamine (MPDA) nanoparticles co-loaded with temozolomide (TMZ) and indocyanine green (ICG) for synergistic glioblastoma therapy. The corrected figure includes CLSM images of G422 cells after incubation with various formulations (ICG, sPDA@ICG, mPDA@ICG, MPDA@ICG), cell viability curves, quantitative fluorescence intensity, live/dead staining, and apoptosis quantification. Statistical significance is denoted as ****p < 0.01. The correction maintains the scientific validity of the findings, which demonstrate the potential of MPDA-based nanoplatforms for combined chemo-photothermal therapy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3685-7
NiMo-based catalysts are promising for the hydrogen evolution reaction (HER), yet optimizing their electronic structure and enhancing mass transfer remain challenging. Here, we report a route to synthesize two-dimensional (2D) porous Mo2N-Ni heterojunction nanosheets with tuned Ni/Mo ratio for enhanced alkaline HER. The precursor is assembled from polyoxometalate clusters (PMo12) and layered Ni(OH)2. The interaction between PMo12 and Ni(OH)2 suppresses particle agglomeration during pyrolysis, yielding 2D porous sheets composed of small Mo2N-Ni units. Electron transfer from Ni to Mo2N redistributes electrons at the heterojunction, optimizing intermediate adsorption/desorption. The porous structure enhances mass transfer, reducing catalyst impedance. The optimized catalyst exhibits an overpotential of 19 mV at 10 mA cm−2, comparable to commercial Pt/C. An anion exchange membrane (AEM) electrolyzer pairing this catalyst with NiFe-LDH achieves 500 mA cm−2 at 1.80 V and operates stably for 300 h. This assembly method offers a scalable strategy for efficient catalyst production.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506031
The production of activated carbon from waste biomass such as cyanobacteria from Lake Taihu represents a promising resource utilization route. However, existing studies are mostly confined to laboratory scale, and the gap between laboratory processes and industrial production hinders the evaluation of technical feasibility and economic viability. This study optimized the process for producing cyanobacteria-based columnar activated carbon by co-processing cyanobacteria with garden waste (sawdust), and validated the process on an engineering-scale production line with a daily capacity of 5 t of raw materials. Economic feasibility was also assessed. Results showed that the optimized activated carbon exhibited a particle strength of 91.3% and a specific surface area of 571.44 m2·g−1. The engineering-scale line processed 5 t of raw materials daily, yielding approximately 1.18 t of activated carbon with stable quality: strength of 94.3% and specific surface area of 471.42 m2·g−1, featuring a microporous-dominant structure with coexisting micropores and mesopores. Cost analysis indicated a production cost of 3,595.65 CNY per ton of activated carbon, demonstrating favorable economic benefits. This work provides a basis for larger-scale production and application of cyanobacteria-based activated carbon.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507057
This study presents a novel electrochemical sensor for the rapid detection of trace lead ions (Pb(II)) in water, utilizing a rod-shaped bismuth-based electrode. The electrode was fabricated by modifying a glassy carbon electrode (GCE) with basic bismuth nitrate [Bi6O5(OH)3](NO3)5·3H2O, synthesized via a chemical precipitation method. The sensor was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), electron probe microanalysis (EPMA), and energy-dispersive X-ray spectroscopy (EDS), confirming the rod-like morphology and composition. Electrochemical detection was performed using differential pulse voltammetry (DPV) in a 0.1 mol·L−1 NaAc-HAc buffer (pH 4.3). The sensor exhibited a linear detection range for Pb(II) from 1 to 90 μg·L−1, with a detection limit of 0.34 μg·L−1 and a sensitivity of 106 μA·(μmol·L−1)−1. The electrode demonstrated excellent anti-interference capability and reproducibility. Recovery tests in real water samples (tap water and campus lake water) yielded high recovery rates, indicating practical applicability. This work provides a simple, cost-effective, and reliable method for monitoring trace Pb(II) in environmental water, particularly relevant for public swimming pools and similar aquatic facilities.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024092906
Microplastic pollution in rivers and lakes has become a research hotspot, yet studies in Anhui Province have predominantly focused on northern and central regions, leaving southern Anhui under-investigated. This study addresses that gap by examining the Xin'an River in Huangshan City, a typical river in southern Anhui. Surface water and sediment samples were collected in December 2023. In surface water, microplastic concentrations ranged from 350 to 3700 n·m−3, with particles of 0–0.5 mm dominating (33.93%). Fibrous shapes were most prevalent (59.83%), and colored particles accounted for 50.27%. In sediments, concentrations ranged from 25 to 200 n·kg−1, with 0–0.5 mm particles again dominant (49.63%). Fibers comprised 47.08% of sediment microplastics, and white particles accounted for 34.74%. Polymer analysis identified polyethylene terephthalate (PET) as the most abundant material (36.61%), followed by polyamide (PA) (23.22%). Source analysis suggests that fibrous microplastics originate primarily from fiber-based products such as clothing, home textiles, and fishing nets. These findings provide essential baseline data for water resource management, pollution assessment, and ecological remediation of the Xin'an River.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122101
Bicarbonate and carbonate ions (HCO3−/CO3^2−) are ubiquitous in wastewater and readily scavenge strong oxidants, leading to the formation of carbonate radicals (CO3·−) in radical-based advanced oxidation processes. This study investigated the influence of HCO3−/CO3^2− on the degradation kinetics of sulfamethazine (SMR) in a UV/TiO2 system. The presence of HCO3−/CO3^2− enhanced the degradation rate of SMR by sixfold compared to UV/TiO2 alone. Radical quenching experiments identified CO3·− as the primary reactive species responsible for the enhanced degradation, with hydroxyl radicals (·OH) also contributing. To quantitatively delineate the roles of reactive species and account for water matrix effects, a kinetic model was constructed using Kintecus software. The model accurately predicted SMR degradation over time and the contributions of individual radicals, demonstrating good predictive capability. Application of the model to real wastewater predicted that CO3·− is the dominant radical responsible for SMR degradation. These findings highlight the critical role of carbonate radicals in UV/TiO2 processes and provide a robust modeling framework for predicting the fate of pharmaceuticals in carbonate-rich waters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4094-8
Deep-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency, high color purity, and high brightness are critically important for next-generation OLED displays, yet remain challenging due to severe aggregation and host-guest interactions in the solid state. Herein, we report a core-encapsulating molecular design strategy in which bulky and non-conjugated peripheral groups are introduced to sterically encapsulate a blue-emitting MR core, thereby suppressing intermolecular π-π interactions without perturbing its intrinsic electronic structure. Two new emitters, DNa-BN and QNa-BN, featuring half-encapsulated and fully encapsulated MR-core architectures, respectively, were developed. Owing to its fully encapsulated structure, QNa-BN exhibits pronounced aggregation resistance at high doping concentrations, maintaining photoluminescence quantum yields exceeding 96%, radiative decay rate constants on the order of 10^8 s−1, and fast reverse intersystem crossing rates (~10^5 s−1). Consequently, sensitizer-free OLEDs based on QNa-BN deliver narrowband deep-blue emission at 458 nm with a full width at half maximum of 22 nm, CIE coordinates of (0.142, 0.085), a maximum external quantum efficiency (EQE_max) of 34.4%, and a maximum luminance exceeding 20,000 cd m−2. Furthermore, by adopting a hyperfluorescence architecture, the EQE_max is further boosted to 38.7% with significantly suppressed efficiency roll-off. This work demonstrates that steric encapsulation of the MR core provides an effective and general approach to achieving aggregation-resistant, high-efficiency, and high-brightness deep-blue MR-TADF emitters for OLED applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3595-7
Cu(I) complexes exhibiting thermally activated delayed fluorescence (TADF) have emerged as promising alternatives to noble-metal-based emitters for organic light-emitting diodes (OLEDs). However, the development of red-emitting Cu(I) complexes has been hindered by slow radiative decay and fast nonradiative decay. In this study, a linear two-coordinate Cu(I) complex, ICuTMC, was designed and synthesized. By pairing a pyrazine-fused N-heterocyclic carbene and a tetra-methylcarbazolyl ligand, a strong ligand-to-ligand charge transfer excited state is generated. Single-crystal structure authenticates close intramolecular C–H···Cu contacts, providing good steric shielding to the metal center. C–H···π interactions between ligands are also revealed. The complex exhibits highly efficient red TADF with emission maximum at 622 nm, photoluminescence quantum yield of 76%, and short delayed fluorescence lifetime of 0.24 μs. This is enabled by a large oscillator strength from the coplanar donor-Cu-acceptor conformation, a small singlet-triplet energy gap from spatial separation of frontier molecular orbitals, and strong spin-orbit coupling from the metal center. Vacuum-deposited OLEDs based on ICuTMC achieve a peak external quantum efficiency of 25.9% and a significantly small roll-off of 1.9% at 10,000 cd m−2. These performances demonstrate a way to overcome the energy gap law for linear coinage metal complexes toward red OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3745-1
Short-wavelength infrared (SWIR) organic photodetectors (OPDs) have attracted considerable attention due to their potential to overcome the limitations of inorganic counterparts. However, developing organic semiconductors with strong SWIR detection remains a significant challenge. Herein, we design and synthesize a new conjugated pyrrolic polysquaraine (PSQ-COT) by integrating a pyrrolic squaraine unit with a strong electron-donating moiety, achieving an absorption onset extending to 1.2 μm. To evaluate its detection performance, we fabricated two types of PSQ-COT-based SWIR OPDs with PC61BM and BTP-eC9 as the electron acceptors, respectively. The resulting PSQ-COT:PC61BM OPD exhibited superior detection performance compared with the BTP-eC9 counterpart, achieving an impressive specific detectivity of 1.08 × 10^12 Jones at 1030 nm under zero bias. This enhanced performance is due to the lower degree of energetic disorder and reduced trap density in the PSQ-COT:PC61BM device. Furthermore, we successfully integrated the PSQ-COT:PC61BM OPD into a high-pixel-density image array (640 × 512 pixels), enabling clear matter identification under SWIR light irradiation. This work provides valuable insights into designing high-performance organic semiconductors for SWIR light detection and imaging applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61102-X
Silicon-carbon composites prepared by chemical vapor deposition (CVD) are promising anode materials for high-energy-density lithium-ion batteries. However, the influence of the pore structure of the porous carbon (PC) carrier on silicon deposition behavior, and the impact of surface silicon on cycling stability, remain unclear. This study systematically investigates these effects using nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Porous carbons with varying pore architectures were synthesized by adjusting KOH activator ratios. Results show that increased micropore volume facilitates higher silicon mass loading, but also elevates the content of surface floating silicon due to greater silane exposure. Moderately increasing mesopores in high-microporosity carbon promotes deeper silicon deposition, reducing surface floating silicon. Excessive surface floating silicon hinders lithium-ion diffusion kinetics, leading to accumulation of active lithium, accelerated SEI growth, and electrode degradation. Electrochemical testing reveals that the optimized silicon-carbon composite maintains a high specific capacity of 693.1 mAh/g after 150 cycles at 0.5 C (900 mA/g). This work provides new insights into the development and failure mechanisms of CVD-derived silicon-carbon composite anodes, emphasizing the critical role of pore structure in mitigating surface silicon and enhancing cycling stability.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510028
This study investigates the aging mechanism of polystyrene microplastics (PS MPs) induced by ultraviolet (UV)-activated potassium persulfate (KPS) and its influence on the adsorption of norfloxacin (NOR). Results show that aged PS exhibited yellowing, increased surface roughness and specific surface area, enhanced oxygen-containing functional groups, and elevated negative surface charge, along with the generation of environmentally persistent free radicals (EPFRs). Compared with UV alone, UV+KPS induced more pronounced aging due to the generation of reactive oxygen species (ROS) including hydroxyl radicals (·OH) and superoxide radicals (O2·−). Adsorption kinetics and isotherm data revealed that UV+KPS-aged PS significantly enhanced NOR adsorption, with a maximum adsorption capacity of (2.539±0.032) mg·g−1, which was 4.20 times higher than that of pristine PS. The adsorption mechanism was governed by hydrogen bonding, electrostatic interactions, and pore filling. Solution pH modulated the electrostatic interactions by affecting NOR speciation and PS surface charge, thereby influencing NOR adsorption. This study systematically reveals the accelerated aging of coexisting MPs and EPFRs generation during UV+KPS treatment, contributing to a comprehensive understanding of MPs environmental behavior and potential ecological risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011302
Heavy metal contamination in soil severely compromises the quality and safety of Alisma orientale medicinal materials, and consumption of contaminated herbal preparations poses health risks. To characterize contamination and risks in Sichuan's genuine producing areas, 159 paired soil and plant samples were collected. Concentrations of Cu, Zn, Pb, Cd, and Ni were determined via ICP-OES. Soil pollution was assessed using the Single Pollution Index (Pi), Nemerow Comprehensive Index (Pn), and Potential Ecological Risk Index (RI). Human health risks from heavy metals in Alisma were evaluated via Target Hazard Quotient (THQ) and Hazard Index (HI). Mean soil concentrations were Cu 29.57, Zn 61.86, Pb 29.51, Cd 1.77, and Ni 28.08 mg·kg−1. Except for Cd, all elements were below agricultural soil screening values. Pi and Pn confirmed Cd contamination, with Cd posing slight to strong potential ecological risks. Cu, Cd, Pb, and Ni showed highly significant positive correlations, indicating common origins. Heavy metal concentrations in Alisma did not exceed pharmacopeial limits. The plant exhibited strong Zn enrichment but weak accumulation of Cu, Cd, and Pb, and negligible Ni enrichment. THQ and HI values indicated no potential health risks under current exposure. Quantitative assessment is critical for soil pollution control, safe cultivation, and medication safety.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605005
Water quality prediction is essential for river basin management, yet existing models often struggle with non-stationary, noisy monitoring data. This study collected water quality data from two city-level control sections in southern China from December 2020 to June 2024, including eight indicators: water temperature, turbidity, pH, conductivity, dissolved oxygen (DO), ammonia nitrogen (NH4+-N), total phosphorus (TP), and permanganate index (CODMn). To predict four key indicators (DO, NH4+-N, TP, CODMn), we developed hybrid models combining seasonal trend decomposition (STD), Bayesian hyperparameter optimization, and either random forest (RF) or XGBoost. STD smoothed and denoised the data while extracting seasonal factors; Bayesian optimization tuned model hyperparameters. Evaluation showed that the STD-Bayesian-XGBoost model achieved smaller bias errors and higher prediction accuracy than STD-Bayesian-RF. Specifically, XGBoost reduced root mean square error (RMSE) by 15-20% across all four indicators and improved the coefficient of determination (R²) to above 0.90, compared to RF's 0.85-0.88. The models were validated on southern river data, but the methodology is generalizable to other climatic and hydrological settings. This work provides a technical reference for pollution reduction and carbon management in regional watersheds.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605020
To address the high CO2 emission proportion in the industrial sector, distillers' grain waste was converted into biochar for CO2 adsorption from flue gas. Raw biochar suffers from weak pore adsorption and poor selectivity at elevated temperatures. This study employed ash self-templating and particle self-assembly to create hierarchical pores and simultaneously load amine groups onto distillers' grains-derived biochar, yielding amine-functionalized hierarchical porous carbon spheres. The amine loading significantly increased, providing more CO2 adsorption sites, while retaining macroporosity (total pore volume 0.0030–0.0066 cm3/g after amine loading), which enhanced morphological stability and CO2 mass transfer. The optimal sample, 0.2PW-K-CNF-PEI, exhibited a CO2 adsorption capacity of 1.03 mmol/g at 100 °C, a CO2 diffusion coefficient of 0.0495 min−1, and a selective adsorption capacity of 44 mg/g at 80 °C. This work offers a solution for valorizing distillers' grain by-products and capturing CO2 from low-temperature flue gas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3784-9
Symmetry-breaking charge separation (SB-CS) is a fundamental process in natural photosynthesis and holds promise for organic semiconductor applications. However, the influence of SB-CS on excited-state chirality has remained unexplored. Here, we employ femtosecond time-resolved circularly polarized luminescence (TRCPL) and transient absorption (TA) spectroscopy to investigate the excited-state chirality dynamics of a chiral perylenediimide bichromophore (Cy-PDI 2). Our results reveal that the locally excited (LE) state decays to a symmetry-breaking charge-separated (SB-CS) state within 88 ps in tetrahydrofuran (THF), while this process is strongly quenched in toluene (TOL). Time-dependent emission dissymmetry factor g_lum(t) extracted from TRCPL kinetics demonstrates a one-order-of-magnitude enhancement of circularly polarized luminescence after SB-CS, directly reflecting the asymmetry of electron cloud distribution on an ultrafast timescale. This work provides the first direct observation of excited-state chirality evolution during SB-CS and proposes a mechanistic framework. Our findings offer deeper insight into the origin of excited-state chirality, which is crucial for understanding efficient energy transfer, enantiospecific recognition, and asymmetric catalysis in biological and chemical systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3818-4
The electrocatalytic reduction of carbon dioxide (CO2RR) to multi-carbon (C2+) products is of significant interest due to its implications for chemical manufacturing and carbon neutrality. However, the competitive hydrogen evolution reaction (HER) and sluggish C–C coupling kinetics impede selectivity at industrial current densities. Here, we report an interfacial nanoconfinement strategy using N-(2-acetamido)iminodiacetic acid (ADA) to engineer a series of capping layer-covered Cu catalysts (Cu@ADA-x). A volcano-type correlation between capping layer thickness and C2+ selectivity is observed. The optimized Cu@ADA-m catalyst achieves a maximum Faradaic efficiency for C2+ products (FE C2+) of 86.8% and maintains over 80% of its initial FE C2+ after 42 hours at 200 mA cm−2, with an energy efficiency of 38.5%. In-situ Raman spectroscopy and density functional theory (DFT) calculations reveal that the capping architecture stabilizes metastable Cu species and optimizes gas adsorption, enhancing *CO intermediate utilization and lowering C–C coupling energy barriers. This work provides a catalyst design principle for industrial-scale carbon-neutral electrochemical production of multi-carbon products.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3993-y
Conventional liquid-phase in-situ synthesis of Cu-TiB2 composites often suffers from coarse and non-uniformly distributed reinforcements, stemming from insufficient understanding and control over the in-situ nucleation and growth mechanisms of TiB2 particles. This study introduces a novel melt dispersion-turbulent mixing (MDTM) in-situ reaction technology to fabricate high-performance Cu-TiB2 composites. The MDTM strategy synergistically refines reaction micro-regions by reducing the initial melt droplet size via melt dispersion while enhancing solute convection via turbulence, promoting high-density nucleation and refinement of TiB2 particles. Based on turbulence characteristics and in-situ reaction kinetics, we optimized the melt disperser parameters and established a quantitative model linking particle size to disperser rotation speed and reactant solute concentration. It was found that disperser rotation speed governs three distinct nucleation and growth mechanisms for TiB2 particles. Low-density nucleation at low disperser rotation speeds (0–50 r/min) leads to coarse TiB2 particles. At medium rotation speeds (100–150 r/min), the refinement of micro-regions in the dual-melt reaction achieves high-density TiB2 nucleation. Conversely, at high rotation speeds (150–200 r/min), intense turbulence weakens the nucleation driving force and induces TiB2 particle coarsening. This work provides new insights into liquid-phase in-situ reaction mechanisms and offers a novel, controllable route for fabricating high-performance micro/nano particle-reinforced metal matrix composites.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509051
Recyclables constitute a significant fraction of municipal solid waste (MSW) and hold substantial potential for resource utilization and greenhouse gas (GHG) emission reduction, contributing to carbon peak and carbon neutrality goals. However, reported GHG emission factors (EFs) for various recyclables vary widely across databases and literature, ranging from -19,110 to -125 kgCO2-eq·t⁻¹, with significant differences both among categories and within the same category, complicating accurate accounting. This study systematically integrates literature data on EFs for different recyclable categories, focusing on identifying factors causing intra-category variability. Data were collected from global databases (ecoinvent, WARM, CPCD, NAEI) and peer-reviewed studies over the past two decades, normalized to a functional unit of 1 tonne of recyclable. Statistical analysis (mean ± standard deviation) provided reference ranges for each category. Results show paper recyclables EFs range from -3,140 to 270 kgCO2-eq·t⁻¹, with corrugated cardboard and writing paper exhibiting higher absolute values than packaging paper due to structural strength and resource value. Plastic recyclables EFs range from -3,096 to -566 kgCO2-eq·t⁻¹, with EPS showing the highest reduction potential, followed by PET and PVC, then HDPE, LDPE, PP, and other plastics. Key influencing factors include functional unit definition, accounting scenario, system boundary, electricity emission factor selection, and calculation assumptions. The study recommends selecting EFs matching the specific accounting scenario and performing error analysis. Data gaps remain for LDPE, EPS, and other plastics, necessitating further experimental or field data. To enhance accuracy, calibration methods such as process-level and life-cycle inventory data calibration are proposed. This work provides a scientific basis for EF selection and calibration in GHG accounting of recyclables.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509001
To address low nitrogen removal efficiency in wastewater treatment plant (WWTP) effluent due to insufficient carbon sources and weak reoxygenation in conventional constructed wetlands (CWs), a tidal flow-subsurface flow integrated CW using iron-loaded biochar (BC-TF) as substrate was developed, with zeolite-based CW as control. Simulated wastewater experiments, water quality monitoring, nitrification/denitrification intensity assays, and high-throughput sequencing were employed. Results showed that tidal flow operation significantly enhanced removal of total nitrogen (TN) and ammonia nitrogen (NH4+-N), and increased nitrification intensity. Addition of iron-loaded biochar significantly improved TN and nitrate nitrogen (NO3−-N) removal, with BC-TF achieving an average TN removal of 86.03%, significantly higher than other groups (P<0.001). Microbial analysis revealed Proteobacteria, Actinobacteria, and Bacteroidetes as key phyla; iron-loaded biochar increased microbial abundance and diversity in tidal flow wetlands, while tidal flow alone reduced bacterial diversity. Pilot-scale experiments confirmed that tidal flow increased dissolved oxygen and nitrogen removal. This study is the first to combine iron-loaded biochar with tidal flow-subsurface flow CWs, systematically revealing the synergistic nitrogen removal mechanism of 'iron-loaded biochar-tidal flow-microorganisms', clarifying the role of iron-nitrogen coupling, and validating engineering applicability via pilot tests. The combination enhances reoxygenation, supplements carbon sources, and optimizes microbial community structure, effectively improving deep nitrogen purification of WWTP effluent, providing technical reference for tailwater treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025120801
The interaction between microplastic-derived dissolved organic matter (PSDOM) and iron oxides in soil environments can modulate its photosensitization effects, yet the underlying mechanisms remain elusive. This study investigated the influence of hematite with distinct morphologies—flake-shaped (HNPs) and cubic (HNCs)—on the photosensitization of polystyrene-derived dissolved organic matter (PSDOM). Under 500 W mercury lamp irradiation, both hematite morphologies promoted PSDOM degradation, with HNCs exhibiting superior performance: total organic carbon (TOC) decreased from 18.4 mg·L−1 to 12.3 mg·L−1 within 90 min, compared to 13.3 mg·L−1 for HNPs. Three-dimensional fluorescence spectroscopy indicated that hematite alters the humification process, thereby modifying photosensitization. Electron paramagnetic resonance (EPR) spectroscopy identified the generation of singlet oxygen (1O2), hydroxyl radicals (·OH), and carbon-centered radicals (CH3C(=O)OO·). HNCs significantly enhanced 1O2 production, while HNPs favored ·OH generation; both inhibited CH3C(=O)OO· formation. Quantitative analysis via high-performance liquid chromatography revealed that the steady-state concentration of 1O2 was highest with HNCs, reaching 2.80 times that of the PSDOM control, whereas ·OH concentration peaked with HNPs at 1.98 times the control. Notably, the steady-state concentration of 1O2 was approximately three orders of magnitude higher than that of ·OH. These findings elucidate the morphology-dependent role of hematite in PSDOM photosensitization, providing mechanistic insights into the environmental fate of microplastic-derived organic matter in complex soil systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030602
In the context of accelerated urbanization, regional air composite pollution in medium and large urban agglomerations is primarily characterized by PM2.5-O3 compound pollution. To elucidate the meteorological causes of PM2.5-O3 compound pollution in the Yangtze River Delta (YRD) region over the recent seven years (2017–2023), this study analyzed monitoring data from typical cities (Nanjing, Shanghai, Hangzhou, and Hefei) using Pearson and partial correlation coefficients. Results indicate: (1) PM2.5 pollution exhibited a significant downward trend across all four cities, with notable improvement during the COVID-19 pandemic in 2020, underscoring the effectiveness of air pollution control measures. Conversely, O3 pollution remained elevated or increased in some cities, indicating persistent challenges in O3 control. (2) During O3 pollution episodes, PM2.5 and O3 concentrations were positively correlated, whereas during PM2.5 pollution episodes, they were negatively correlated. (3) Compound pollution days were predominantly observed from February to October, with the highest frequency (20 days) occurring from April to June. (4) The significant reduction in PM2.5 weakened the aerosol 'umbrella effect', enhancing surface radiation and promoting near-surface O3 formation. Concurrently, changes in the NOx/VOCs ratio weakened O3 titration, and climate warming accelerated O3 precursor generation and potentially altered boundary layer structure, collectively contributing to O3 accumulation in the cold season and an increasing frequency of compound pollution during that period. (5) The formation mechanisms of PM2.5 and O3 are driven by distinct meteorological conditions, with low overall concentration correlation; however, under compound meteorological conditions such as high temperature, stagnant air, and weak diffusion, both pollutants tend to rise synchronously, indicating that compound pollution events are typically driven by multiple adverse meteorological factors. This study demonstrates that from 2017 to 2023, PM2.5 pollution significantly decreased while O3 pollution showed an increasing trend. Compound pollution was concentrated in April–June and influenced by high temperature, stagnant air, and weak diffusion. With effective PM2.5 control, enhanced surface radiation and changes in O3 precursors led to O3 accumulation in the cold season, increasing compound pollution frequency. Overall, compound pollution is driven by multiple meteorological factors, posing complex challenges for control.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021901
To assess the impact of the Air Pollution Prevention and Control Action Plan (APPCAP) on the chemical composition of PM2.5, this study analyzed the concentrations, existing forms, and sources of water-soluble ions in PM2.5 collected during summer (June–August) in the northern suburbs of Nanjing for the years 2012, 2013, 2017, and 2019. The results demonstrate a significant reduction in total water-soluble ion concentrations in 2017–2019 compared to 2012, indicating the effectiveness of APPCAP in mitigating PM2.5 pollution. Sulfate (SO4^2−), nitrate (NO3^−), and ammonium (NH4^+) (collectively SNA) were the dominant ionic species, contributing 69.98%–92.58% of the total ion mass, with SO4^2− being the most abundant. In the summers of 2013 and 2017, PM2.5 exhibited alkaline properties, and SNA primarily existed as NH4NO3 and (NH4)2SO4. Conversely, in 2019, PM2.5 became acidic, with SNA present as NH4NO3 and NH4HSO4. The nitrogen oxidation ratio (NOR) and sulfur oxidation ratio (SOR) indicated that NO3^− and SO4^2− predominantly originated from secondary reactions, with SO2 undergoing secondary conversion more readily than NO2, and the degree of secondary conversion increasing annually. Source apportionment revealed a shift from long-range transport in 2013 to local and regional sources by 2017. These findings underscore the success of APPCAP in reducing primary emissions and altering the chemical speciation of secondary inorganic aerosols, while highlighting the persistent dominance of sulfate and the need for continued SO2 emission controls.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606004
To identify optimal watershed remediation pathways under environmental and economic dimensions, an integrated environmental-economic impact assessment framework combining life cycle assessment (LCA) and life cycle costing (LCC) based on openLCA was established, using 1 m³ of treated wastewater as the functional unit. This framework comprehensively evaluated the environmental impacts and economic costs of three ecological buffer measures—constructed wetlands, ecological intercepting ditches, and vegetation restoration projects—in non-point source pollution control. The results indicated that constructed wetlands offer the optimal environmental-economic profile, featuring the lowest comprehensive cost (¥1.01 yuan/m³) and the lowest load across most environmental impact categories, with only slightly higher land resource consumption intensity. Ecological intercepting ditches exhibited higher impacts in areas such as metal resource consumption due to the use of rebars and base fertilizer inputs, resulting in a moderate comprehensive cost (¥1.57 yuan/m³). Vegetation restoration projects incurred the highest comprehensive cost (¥61.14 yuan/m³) and produced the most significant environmental impacts, with elevated indicators such as human carcinogenic toxicity. This primarily stemmed from the extensive use of concrete grass pavers and base fertilizer in rural river sections. These findings provide quantitative references for environmental-economic integrated evaluation and decision-making regarding ecological buffer zone engineering schemes in similar watersheds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3820-5
Two novel N-heterocyclic carbene (NHC)-based ligands featuring rigid boron-oxygen (BO) fused-ring units, named Bpmi and Bpmb, and the two corresponding homoleptic meridianal iridium complexes, namely mer-Ir(Bpmi)3 and mer-Ir(Bpmb)3, were designed and synthesized. Single-crystal structures revealed a meridional coordination geometry for both complexes. Shorter Ir–C carbene bond lengths and rigid planar BO-fused ring units contribute to enhanced stability. Both complexes exhibit efficient green phosphorescence (λem = 536/521 nm in toluene, ΦPL > 78%) with short lifetimes (τ = 846/1083 ns), leading to high radiative rate constants (Kr = 10.04 × 10^5 and 7.29 × 10^5 s−1, respectively). Theoretical calculations indicate significantly increased metal-to-ligand charge transfer (MLCT) character (21.69% for mer-Ir(Bpmi)3; 17.30% for mer-Ir(Bpmb)3) compared to reference complexes (13.01% for mer-Ir(pmi)3; 15.99% for mer-Ir(pmb)3). Both complexes exhibit exceptional thermal stability with decomposition temperatures of 491°C (mer-Ir(Bpmi)3) and 540°C (mer-Ir(Bpmb)3). OLED devices using mer-Ir(Bpmb)3 and mer-Ir(Bpmi)3 as emitters demonstrate maximum external quantum efficiencies of 20.0% and 15.6%, respectively. This research pioneers boron-fused ring-containing NHCs and their phosphorescent iridium(III) complexes, establishing a novel design strategy for high-performance NHC-based OLED phosphorescent emitters.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026020207
Although the production and use of hexabromocyclododecanes (HBCDs) have been completely banned in China since December 2021, historical production activities may still leave high-concentration residual contamination in localized areas. This study investigated a typical legacy site of historical HBCDs production in eastern China. Surface and core soil samples were systematically collected both inside and outside the former plant area to characterize the occurrence, spatial distribution, and environmental burden of HBCDs, and to evaluate associated human health risks. Results showed that HBCD concentrations in soils outside the plant area ranged from below detection limit to 6.90×10² ng·g⁻¹ dw, while those inside the plant area were substantially higher, reaching up to 1.18×10⁶ ng·g⁻¹ dw. γ-HBCD was the dominant isomer; however, its relative abundance was lower than that reported in commercial HBCD mixtures and in previous studies conducted near production facilities. Outside the plant, HBCDs concentrations in soil generally decreased with increasing distance from the site, yet remained detectable at a distance of approximately 10 km (15.2 ng·g⁻¹ dw). Within the plant area, HBCDs concentrations in soil cores decreased with depth, declining from 1.08×10⁴–1.18×10⁶ ng·g⁻¹ dw in surface soils to 1.05–93.5 ng·g⁻¹ dw at depths of about 4 m. Analysis of the relative cumulative environmental burden indicated that although HBCDs loads were highest in the near-source area, they gradually accumulated over a broader spatial scale. Approximately 23.7%, 40.1%, 60.0%, and 87.1% of the total estimated burden accumulated within 2 km, 2.81 km, 4 km, and 6 km from the site, respectively. Health risk assessment indicated that oral ingestion of soil was the primary exposure pathway for different populations. Localized high-contamination zones within the plant area contributed significantly to non-carcinogenic risks, while overall risks for children outside the plant area were at acceptable levels.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607009
Resource utilization of food waste is a key measure for implementing waste classification and constructing zero-waste cities in China. However, the technical route based on anaerobic digestion currently faces developmental bottlenecks. In this study, engineering-scale facilities located in Northeast, North, Northwest, and Southeast China were selected, and material flow analysis was employed to comprehensively assess the current status of anaerobic digestion of food waste. The results indicated that, during the pretreatment stage, both leachate and organic slurry from all surveyed regions exhibited high COD/TN ratios, and the leachate contained high concentrations of lipids. Following three-phase (oil-water-solid) separation, the oil recovery rate could reach over 98%. Anaerobic digestion of each ton of food waste from the four regions generated approximately 70 to 80 Nm³ of biogas, while simultaneously producing liquid digestate accounting for 69% to 80% of the total mass and solid digestate accounting for 2.7% to 3.6%. However, the annual continuous production of digestate was not aligned with the seasonal demand for land use, thereby restricting the pathway for resource utilization. Converting food waste into an external carbon source can significantly enhance its resource utilization efficiency, with the economic benefits increasing by more than 203% compared to the methanogenesis pathway. The selection of the carbon source production technology route should be comprehensively determined by taking into account factors such as the specific nitrogen removal requirements of the target wastewater treatment process, the quality requirements for the carbon source products, and the substitution rate of commercial carbon sources.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607019
This study investigated the effects of biochar on volatile fatty acids (VFAs) production, biogas composition, physicochemical properties of the fermentation broth, and microbial community structure through batch anaerobic fermentation experiments using food waste as the substrate. The results demonstrated that the addition of biochar (1 g/L) significantly enhanced VFAs production, with the total VFAs concentration reaching 2150 mg/L in the biochar group, which was 30.2% higher than that of the control group (1651 mg/L). Acetic acid, propionic acid, and butyric acid were identified as the primary VFAs components. In the fermentation system, biochar exhibited a notable pH-buffering effect, stabilizing the fermentation environment. Additionally, its porous structure adsorbed ions during the fermentation process, resulting in a slightly lower electrical conductivity compared to the control group. Microbial community analysis revealed that biochar addition enriched key acidogenic bacteria, such as Defluviitoga and norank_f__Family_XI, optimizing the microbial community structure, and thereby facilitating organic acid production. In summary, biochar effectively promoted the efficient accumulation of VFAs during anaerobic fermentation of food waste by improving the fermentation microenvironment, enhancing system buffering capacity, and regulating microbial community composition. These findings provide theoretical support for sustainable enhancement of resource utilization of food waste.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3922-2
Photocatalytic reduction of CO2 to syngas (CO and H2) is pivotal for Fischer-Tropsch synthesis and carbon neutrality, yet suffers from rapid charge carrier recombination. Here, we report a solvent-induced defect engineering strategy to fabricate nitrogen vacancy (Nv)-modified Fe3O4 (Fe3O4-Nv-12h). Under visible light (λ ≥ 420 nm), Fe3O4-Nv-12h achieves a total syngas production rate of 43.55 mmol g−1 h−1 with a near 1:1 CO/H2 ratio, representing an 805.2-fold enhancement over pristine Fe3O4 and surpassing state-of-the-art systems. Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) confirm that Nv introduction modulates the electronic structure, acting as electron traps to suppress recombination and enhance charge transport. In situ Fourier transform infrared (FTIR) spectroscopy identifies *COOH and *CO as key intermediates for CO formation. This work establishes an effective nitrogen vacancy modification strategy for efficient photocatalytic CO2 conversion to syngas, offering new avenues for high-performance catalyst design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3964-5
The escalating demand for personalized thermal-moisture comfort, coupled with the high energy consumption of conventional heating and cooling systems and the imperative for low-carbon energy conservation, has driven the development of shape memory smart fabrics that respond to environmental changes. However, existing shape memory thermal-moisture management fabrics suffer from excessively high response temperatures, inadequate response performance, and suboptimal thermal-moisture management. In this work, a dual-network shape memory polymer (SMP) was synthesized, and its shape memory transition temperature was tuned to align with the human thermal comfort range. The polymer was processed into fibers and subsequently into twisted-coiled artificial muscles to enhance reversible strain. Woven with wool into a plain fabric, the resulting textile exhibits adaptive thermal-moisture management, achieving a warp reversible strain of up to 17.5%. At elevated temperatures, the fabric contracts, exhibiting an air permeability of 1546 mm/s and thermal conductivity of 0.0518 W/(m·K); at lower temperatures, it elongates, with air permeability of 1322 mm/s and thermal conductivity of 0.0426 W/(m·K), thereby realizing 'warm when cool and cool when hot' functionality. Compared with commercial wool fabrics, this smart fabric lowers the skin microenvironment temperature by 1.5 °C and offers an energy savings potential of approximately 222.58 MJ/m² per year in capital cities such as Beijing. This work provides a novel technical pathway and design approach for future personalized comfort and low-carbon, energy-saving textiles.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511043
Zero-valent iron (ZVI) suffers from surface passivation and low electron utilization in reductive removal of nitrobenzene (NB). To address these issues, a ball-milled iron/digestate biochar composite (BM-Fe/DBC) was prepared and compared with a physically mixed counterpart (PM-Fe/DBC). Characterization revealed that ball milling tightly embedded ZVI particles into the carbon matrix, forming Fe–C chemical bonds and a strong interfacial coupling structure that established efficient electron transfer channels. This structure significantly enhanced the micro-galvanic effect between iron and carbon, yielding superior reduction performance across a wide pH range (3–9). Under optimal conditions (Fe:C mass ratio 2:1, dosage 1.0 g·L−1, pH 5), BM-Fe/DBC achieved 79.9% NB removal, and the generation of aniline (AN) was 1.85 times that of PM-Fe/DBC. Mechanistic studies indicated that the intimate Fe–C interfacial coupling promoted sustained ZVI corrosion and enhanced the production of indirect reducing species, including adsorbed Fe(II) and atomic hydrogen (H*). Electrochemical analyses showed that BM-Fe/DBC exhibited a lower corrosion potential, a higher corrosion current density (approximately 2.15 times higher), and lower charge transfer resistance, kinetically confirming its superior electron transfer capability. These findings reveal that constructing strong interfacial coupling in iron–carbon composites via mechanochemical methods can effectively overcome key limitations of ZVI in reduction reactions, providing a theoretical basis and practical pathway for designing high-performance water treatment materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608013
Eutrophication and cyanobacterial blooms threaten aquatic ecosystems and drinking water safety globally. This study evaluated the efficacy of a compound algicide (PQGA-126, PAC, and red soil) combined with submerged plants (Vallisneria natans and Hydrilla verticillata) for suppressing blooms and restoring eutrophic water. Indoor static experiments used algae-laden water from Nanhu Lake, Gongqingcheng, Jiangxi. Six treatments were established: control, V. natans alone, H. verticillata alone, algicide alone, algicide + V. natans, and algicide + H. verticillata. Results demonstrated that combined treatments significantly reduced total nitrogen (TN), total phosphorus (TP), chlorophyll-a (Chl-a), and turbidity, markedly lowering eutrophication within a short period. The combined approach outperformed single-plant treatments, with algicide + V. natans achieving the greatest reduction in the comprehensive trophic state index. Additionally, the algicide significantly enhanced V. natans growth rate and H. verticillata catalase (CAT) activity, indicating species-specific physiological responses. These findings suggest that integrating compound algicide with submerged plants, particularly V. natans, offers a promising strategy for rapid and effective eutrophic water remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4021-5
Lead-free halide double perovskites have attracted significant attention owing to their eco-friendliness, structural tunability, and self-trapped exciton emission. Nevertheless, achieving efficient and stable near-infrared-II (NIR-II) luminescence, especially in materials incorporating lanthanide ions, remains a considerable challenge in photonics research. Herein, we report a notable advance in the design and synthesis of Sb3+-sensitized Cs2NaLuCl6:Er3+ double perovskite single crystals, which exhibit an unprecedented external quantum efficiency of 45.3% for emission at 1542 nm. Sb3+ acts as a broadband ultraviolet absorber and transfers energy to Er3+ via self-trapped exciton emission. Moreover, at high concentrations of Er3+, Er3+-Er3+ cross relaxation (2H11/2 + 4I15/2 → 4I9/2 + 4I13/2) selectively populates the NIR-emitting 4I13/2 state, suppressing competitive visible emission pathways. This synergistic host-sensitizer-activator design strategy, supported by density functional theory calculations, addresses long-standing efficiency limitations and opens new avenues for high-performance NIR-II emitters in bioimaging, night vision, and optical communications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4058-4
Bacterial infection following endometrial injury delays tissue regeneration and may progress to endometritis and other reproductive disorders. Photodynamic therapy (PDT) offers a promising antibacterial strategy in the post-antibiotic era, yet its efficacy is often limited by rapid recombination of photogenerated charge carriers and poor penetration of visible excitation light. Here, we report a previously unexplored upconversion-mediated, Type I dominant photodynamic antibacterial uterine scaffold specifically designed for infection-associated endometrial injury. The core innovation is the construction of a Schottky Ag0-Ag2S heterojunction on NaYF4:Yb,Tm nanoparticles using ZIF-8 as a sacrificial precursor, enabling efficient charge separation and oxygen-independent hydroxyl radical generation, overcoming the oxygen dependence of conventional Type II PDT under hypoxic uterine conditions. The upconversion core permits deep-tissue-penetrable near-infrared (NIR) activation. Beyond instantaneous PDT, dynamic release of Ag+ ions provides synergistic bactericidal activity, enabling spatiotemporally coordinated biofilm disruption. These nanostructures were incorporated into patient-customizable, biodegradable poly(L-lactic acid) (PLLA) scaffolds fabricated by selective laser sintering, achieving simultaneous antibacterial therapy and endometrial regeneration in a single platform. This integration of an oxygen-independent PDT mechanism, MOF-templated heterojunction engineering, and 3D printed personalized uterine implants constitutes a comprehensive therapeutic strategy not previously reported for treating infection and endometrial injury.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3970-1
Dielectric elastomer actuators (DEAs) are promising artificial muscle technologies due to their large actuation strains, high energy density, and fast response. However, their practical application is hindered by a trade-off between increasing the relative dielectric constant (εr) and decreasing the Young's modulus (Y), which limits electromechanical sensitivity (εr/Y) to below 110 MPa⁻¹. Here, we report a hetero-cross-linking strategy to fabricate a semiseparated biphasic bicontinuous dielectric elastomer (SBE) using two commercial silicone elastomers: Elastosil P7676 (mechanical phase, M-phase) and Sylgard 170 (dielectric phase, D-phase). The M-phase provides an ultralow Young's modulus (~10 kPa), while the D-phase offers a high dielectric constant (3.6). With only 10% D-phase content (SBE-1), the material achieves a record-high electromechanical sensitivity of 360 MPa⁻¹. Under an electric field of 35 V μm⁻¹ without prestretching, SBE-1 exhibits a 90% area strain, significantly outperforming pure phases and previously reported DEAs. The interpenetrating phase structure also enhances breakdown strength. SBE-based artificial muscles demonstrate large displacement at high frequencies, achieving a power density of 2250 W kg⁻¹ at resonance (>200 Hz), surpassing natural muscle and prior DEA artificial muscles. A human-like robotic arm with one rotational joint and four pure-shear SBE-based artificial muscles was developed, capable of extending and bending actions. This work provides a versatile strategy for high-performance DEAs, advancing soft robotics applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4162-0
The urea oxidation reaction (UOR) offers a low-energy pathway for hydrogen production via water electrolysis, but Ni-based catalysts suffer from Ni self-oxidation reaction (NSOR) that wastes energy and poisons active sites via strong CO2 adsorption. Here, we design MoN/Ni heterostructures to optimize the electronic structure of Ni sites, suppressing NSOR. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy confirm the formation of electron-rich Mo and electron-deficient Ni active pairs. In-situ spectroscopy, electrochemical tests, and density functional theory calculations reveal that electron-rich Mo sites enhance urea adsorption, while electron-deficient Ni sites prevent NSOR, facilitating urea activation, intermediate conversion, and CO2 desorption. The synergistic effect yields a current density of 100 mA cm−2 at only 1.39 V vs. RHE in 1 M KOH + 0.33 M urea, outperforming many NiOOH-based catalysts. This work introduces a novel high-performance catalyst with electron-rich/electron-deficient active pairs for efficient UOR.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4067-4
Confined growth of metal halide perovskite quantum dots (QDs) in porous matrices yields improved stability and sensitivity for their implementation in luminescent chemical sensing applications. Here, we realized the synthesis of highly stable (water, photo, and thermal) and luminescent CsPbX3 QDs within nanoporous glass (NG). This is achieved by a nano-confined aqueous synthesis of CsPbBr3 QDs in Pb-anchored NG. Benefiting from strong Pb–O–Si chemical bonding between the perovskite QDs and the NG matrix, the stability of the encapsulated perovskite QDs is significantly enhanced. The emission of the perovskite NG can be tuned from 440 to 760 nm. By integrating green- and red-emitting perovskite NG onto a blue LED chip, stable WLEDs were successfully fabricated. This facile approach enables the integration of ultra-stable perovskite QDs within transparent porous monoliths toward diverse luminescent chemical sensing applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4098-8
Fluorescence image-guided photodynamic therapy (PDT) enables real-time monitoring of photosensitizer biodistribution and metabolism for optimized treatment timing. However, its application remains limited by reliance on high-end imaging systems. To address this, we designed three novel small-molecule photosensitizers (TTNb, TTAn, TTPh) based on a 2-vinylbenzoic acid scaffold, functionalized at the 5-position with nitro, amino, or hydrogen groups. Replacing the nitro group with amino or hydrogen switched aggregation behavior from aggregation-induced emission (AIE) to aggregation-caused quenching (ACQ), accompanied by a red-to-green fluorescence shift and subcellular relocation from liposomes to lysosomes. These findings establish design principles for ratiometric nitroreductase probes and enable systematic comparison between AIE and ACQ photosensitizers. Among these, TTAn exhibited superior cellular uptake (2800 times higher than Ce6 in Eca-109 cells), specific lysosomal targeting, balanced reactive oxygen species (singlet oxygen/superoxide anion) generation, and intense fluorescence. Under white light irradiation, TTAn achieved an IC50 of 21 nM, surpassing Ce6 by 50-fold. Notably, TTAn produced strong fluorescence in mice tumors under both one- and two-photon excitation, detectable using conventional imaging tools (smartphones, DSLR cameras) or even visible to the naked eye, confirming outstanding tumor specificity. Leveraging these advantages, TTAn enabled successful image-guided two-photon PDT in Eca-109 tumor-bearing mice with a single treatment, demonstrating potent therapeutic efficacy and biosafety. This work provides a strategic blueprint for developing small-molecule theranostic agents that operate without complex fluorescence imaging systems.