SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4112-6
Radiostrontium remediation is crucial for ecological protection and sustainable development of nuclear energy. However, efficient removal of 90Sr from complex radioactive liquid waste, especially under acidic conditions, remains challenging due to material instability and intense proton competition. Herein, the rapid and highly selective capture of Sr2+ in neutral and even acidic solutions has been achieved by a layered potassium phosphatoantimonate KSbP2O8 with excellent radiation and thermal stability. Under neutral conditions, it possesses high maximum adsorption capacity (qmSr = 110.25 mg g−1), rapid adsorption kinetics (the removal rate (RSr) of 91.54% within 30 min), and excellent selectivity for Sr2+, and facile regeneration. Particularly, even under acidic conditions (pH 2.0), KSbP2O8 still maintains excellent Sr2+ removal capacity (qmSr = 79.38 mg g−1), fast kinetics, and high selectivity. A mechanism study by multiple characterizations reveals that the efficient Sr2+ removal of KSbP2O8 mainly stems from ion exchange between Sr2+ and interlayer K+ in KSbP2O8, which is attributed to the synergy between the Sb5+-induced Brønsted acidity and the high charge density of the anionic framework. This study demonstrates the exceptional capability of phosphatoantimonates to selectively capture Sr2+ under acidic conditions, highlighting the potential of phosphatoantimonates as effective scavengers for radiostrontium remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4258-0
High-entropy noble-metal-based catalysts (HENCs) have emerged as a frontier in electrocatalysis, leveraging the synergistic effects of high-entropy alloys and noble metals to achieve exceptional atomic utilization, tunable electronic structures, and vast compositional space. Their anisotropic architectures confer superior dissolution resistance, rapid electron/mass transfer, and abundant active sites. This review systematically categorizes advanced structural regulations—grain boundary engineering, single-atom alloys, intermetallic compounds, amorphous structures, and core@shell configurations—and evaluates their impact on electrocatalytic performance. By modulating surface electronic states and lattice strain, these strategies optimize reaction kinetics and durability. Notable applications include oxygen reduction (ORR), oxygen evolution (OER), hydrogen evolution (HER), and CO2 reduction (CO2RR). Despite progress, challenges persist in scalable synthesis, mechanistic understanding, and long-term stability. This review underscores the potential of HENCs to bridge laboratory innovation and industrial deployment, providing a roadmap for future catalyst design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3520-1
Solution-processed metal halide perovskite light-emitting diodes (PeLEDs) have advanced rapidly due to high color purity, tunable emission, and low cost, with external quantum efficiencies (EQEs) surpassing 30%. However, high EQEs are typically achieved at low brightness, suffering severe efficiency roll-off at high current densities due to Auger recombination and Joule heating. Three-dimensional (3D) perovskites offer superior charge transport but suffer from low photoluminescent quantum yield (PLQY) and efficiency roll-off. The fundamental roll-off mechanism remains poorly understood. Recently, Yao and co-workers developed a molecule-in-lattice-enabled intragrain heterostructure in 3D perovskite to promote carrier confinement. Using device-level ultrafast spectroscopy, they identified hole leakage as the origin of efficiency roll-off in pure-red CsPbI3−xBrx PeLEDs. A strong bonding small molecule with multiple anchor groups was introduced to penetrate the lead halide octahedron framework, constructing wide bandgap barriers inside perovskite grains, reducing hole leakage without compromising carrier transport. This approach enabled ultrabright, highly efficient, and stable pure-red PeLEDs with extremely low efficiency roll-off. The work provides a new strategy for achieving high brightness and efficiency simultaneously, advancing PeLED technology toward practical applications in displays and lighting.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61075-X
The proliferation of electronic devices has intensified electromagnetic radiation pollution, necessitating advanced microwave absorption materials. This study presents the electrospinning fabrication of FeNiCo/carbon nanofiber (FeNiCo/CNF) composites with exceptional microwave absorption properties. The FeNiCo/CNFs achieved a minimum reflection loss (RLmin) of −55.5 dB at 14.24 GHz with an ultrathin matching thickness of only 1.6 mm. Microstructural analysis and electromagnetic parameter testing revealed that the superior absorption stems from the synergistic interaction between the carbon nanofiber network and FeNiCo alloy nanoparticles, which promotes multiple reflections and efficient energy dissipation. The precise control of coercivity and permeability via systematic modulation of magnetic metal composition enabled enhanced impedance matching and optimized magnetic-dielectric synergy. Furthermore, radar cross-section (RCS) simulations confirmed the material's capability to significantly reduce RCS values across a wide angular range, validating its potential for stealth technology applications. This work introduces a cost-effective and sustainable approach for developing ultralight, high-performance microwave absorbers, addressing the limitations of conventional materials such as high density and poor stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3623-y
Organic light-emitting diodes (OLEDs) are an advanced technology for full-color displays, yet the low efficiency of blue OLEDs remains a critical bottleneck. Here, we report a new strategy to design robust Pt(II) emitters with enhanced molecular rigidity and increased locally excited character. The resulting Pt(II) emitter exhibits an extremely narrow emission spectrum peaking at 458.6 nm with a full-width at half-maximum (FWHM) of 16.0 nm and a small Huang-Rhys factor of 0.278, together with a high photoluminescence quantum efficiency of 95%. When doped into an OLED, the device emits at 464 nm with high color purity (FWHM = 19 nm) and achieves high external quantum efficiencies (EQEs) of 32.6%, 29.4%, and 26.9% at luminances of 123, 1000, and 5000 cd/m2, respectively. Notably, the device attains a record-high maximum brightness of 84,895 cd/m2 among reported deep-blue OLEDs with Commission Internationale de l'Éclairage (CIE) y-coordinate < 0.15. This work demonstrates one of the highest-performing deep-blue OLEDs reported to date, addressing the dual challenges of efficiency and brightness in this spectral region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3684-4
The efficient conversion of dinitrogen (N2) to ammonia (NH3) under mild conditions remains a critical challenge for sustainable nitrogen fixation. This study reports a rationally designed ternary heterojunction, GO/MXene/UiO-66 (GM/UiO-66), which achieves directed charge transfer for enhanced photocatalytic nitrogen fixation. The internal electric field at the heterointerface drives anisotropic migration of photogenerated charges, leading to rapid separation of electron–hole pairs and suppression of interfacial recombination. The intrinsic defect structure of graphene oxide (GO) provides active sites for N2 adsorption and activation, while π–π interactions between GO and UiO-66 accelerate electron transfer. Additionally, the Schottky junction between UiO-66 and MXene facilitates hole (h+) transfer. The incorporation of GO and MXene extends visible-light absorption of UiO-66. Under simulated solar illumination, GM/UiO-66 exhibits an NH3 generation rate of 25.1 μmol g−1 h−1, which is 1.9 times higher than that of pristine UiO-66 (13.5 μmol g−1 h−1). This work presents a novel strategy for designing ternary heterojunction composites that optimize charge transfer and significantly improve photocatalytic performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3663-6
Escalating global climate change has precipitated a dramatic surge in building cooling/heating energy demands, critically undermining urban sustainability. Although dynamic thermal management technologies show potential for reducing architectural carbon footprints, prevailing active regulation systems remain constrained by energy-intensive mode-switching mechanisms and unsustainable operational costs. Here, we develop a zebra-inspired radiative modulator (ZIRM) that achieves climate-customized building thermal management through spatially partitioned integration of radiative cooling (RC) and heating (RH) functional units. The material breakthrough resides in a hybrid thin-film architecture combining a cellulose acetate/Zeolitic imidazolate framework-L (ZIF-L) porous membrane (solar reflectance ~95%, thermal emissivity ~0.88) with an MXene/ZIF-67 derived carbon-based absorption layer (solar absorption ~93%, thermal emissivity ~0.37), resolving the opto-thermal coupling limitations inherent to conventional materials. Experimental verification demonstrates that programmable regulation of the RC/RH area ratio enables broad-range temperature differential control from −4.3 to 12.1 °C during daytime operation. Building energy simulations reveal ZIRM’s annual energy consumption of 1.45×10^10 GJ, corresponding to 9.9% and 2.7% reductions compared to pure RC and RH systems, respectively. The established “configuration-environment-performance” predictive model pioneers a paradigm-shifting solution for carbon-neutral architecture, synergizing material innovation with climate-customized engineering strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3616-8
Negative stiffness (NS) structures exploit multi-stable mechanisms to achieve energy absorption, yet their practical application is limited by material and manufacturing constraints that compromise load-bearing capacity, reusability, and energy absorption efficiency. This study addresses these limitations by employing continuous carbon fiber reinforced thermoplastic polymers (CCFRTP) and three-dimensional (3D) printing to fabricate NS structures with cosine beam cells. A wet twisting method for continuous carbon fiber (CCF) was developed to enhance mechanical properties and elucidate failure behaviors and interfacial adhesion mechanisms. The resulting CCF/PLA/PVDF composites exhibited significant improvements in mechanical properties compared to untreated counterparts, with failure analysis revealing characteristic fiber breakage due to enhanced interfacial adhesion, as opposed to fiber pull-out and irregular fracture in untreated samples. A one-stroke path planning model was used to investigate bistability principles and energy absorption mechanisms. Displacement-controlled loading/unloading experiments assessed energy absorption in both energy-locked and repetitive modes. A dual-unit assembly structure was fabricated to validate the feasibility of a negative stiffness honeycomb structure. Composite layup simulations via Abaqus confirmed the deformation process and energy absorption mechanisms. The findings demonstrate that CCFRTP-based NS structures offer considerable potential for large deformation energy absorption applications in aerospace and naval fields.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3686-6
Fused silica (SiO2) exhibits exceptional thermal stability and dielectric properties, making it an attractive material for aerospace and military applications. However, its relatively poor mechanical performance has limited its widespread practical utilization. This study proposed an innovative approach to fabricate SiO2-hexagonal boron nitride (hBN) composite ceramics via spark plasma sintering (SPS), leveraging the high-temperature phase transformation of cubic boron nitride (cBN) to introduce randomly oriented hBN as a reinforcing phase within the SiO2 matrix. The randomly oriented hBN nanoplates allow cracks to propagate along stronger grain boundaries, rather than along weaker interlayers of hBN, significantly improving the overall strength and fracture toughness of the composite. The maximum flexural strength and fracture toughness achieved are 183.4 MPa and 2.06 MPa m1/2 respectively, which are 3.6 times and 4 times that of fused SiO2. Concurrently, the composites exhibit low dielectric constants (ε = 3.58–3.69) and dielectric losses (tan δ < 0.0087) at 1 MHz. This work successfully enhanced the mechanical performance of fused SiO2 while preserving its excellent dielectric characteristics, opening new possibilities for its potential applications in advanced structural and functional fields.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3789-x
Wearable sensors have attracted significant attention due to their superior sensitivity, safety, and adaptability compared with conventional detection technologies. However, developing sustainable sensing materials that combine excellent performance with environmental friendliness remains a significant challenge. In this study, Juncus effusus (JE), a natural fiber featuring a unique internal three-dimensional (3D) network structure, was employed as the substrate. Conductive polyaniline was loaded onto the JE structure to impart electrical conductivity, and Ecoflex encapsulation provided high elasticity. Based on this approach, a JE-based resistive flexible sensor (PHE-JE) was successfully fabricated. The PHE-JE sensor exhibits high stability under various strain conditions, along with excellent flexibility and durability. Moreover, benefiting from its complex 3D structure and synergistic material interactions, the PHE-JE sensor enables accurate detection of diverse motion types, showing promising potential for future wearable sensing applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507029
This study systematically evaluates the environmental risks associated with the resource utilization of municipal solid waste incineration (MSWI) fly ash in the production of aerated concrete, co-prepared with multiple solid wastes. The focus is on the leaching behavior and total content of heavy metals (Cr, Pb, Cd, Cu, Zn) under CO2 curing and chelating agent stabilization. Water washing pretreatment parameters (liquid-to-solid ratio, washing time, ash-to-slag ratio) were optimized for chloride removal. Results demonstrate that CO2 curing suppresses the leaching of most metals; leaching concentrations of Cr, Pb, Cd, and Zn decrease with reduced fly ash content, whereas Cu leaching increases when fly ash is absent. The addition of 17.5% organic sulfur stabilizer (DTC) significantly outperforms inorganic sulfide (Na2S) in immobilizing heavy metals, achieving compliance with national standards without compromising compressive strength or carbon sequestration. Water washing effectively reduces soluble chloride content to below 1% (mass fraction), meeting the HJ 1134-2020 regulatory limit. Optimal parameters include a liquid-to-solid ratio of 5, washing time of 20 min, and a raw material ratio of incineration bottom slag:fly ash:slag = 40:20:40. Under these conditions, the final product exhibits a compressive strength of 1.50 MPa, with heavy metals and soluble chlorides fully compliant. This work provides key technical support for the safe recycling of MSWI fly ash in building materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60613-X
This study systematically optimized the preparation of Co-modified Ce/TiO2 catalysts and investigated the effects of preparation method and Co loading on their low-temperature denitrification activity. The sol-gel method with a Co/Ti mass ratio of 0.025 (Ce-Co0.025/TiO2-SG) yielded superior performance compared to impregnation and co-precipitation methods. The catalyst maintained NO conversion above 95% in the 225–350 °C range and exhibited high N2 selectivity. Characterization via BET, XRD, XPS, H2-TPR, and in situ DRIFTS revealed that the enhanced activity was attributed to abundant surface oxygen vacancies, a high proportion of Ce3+ species, and prominent acidic sites. The catalyst followed the Eley-Rideal mechanism, effectively inhibiting nitrate intermediate formation and promoting NO-to-NO2 oxidation. This work provides a reference for developing efficient low-temperature denitrification catalysts for industrial applications such as cement production, which emitted 722,000 tons of NOx in 2020, accounting for 17.3% of industrial emissions.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112104
Carboxyl-modified polystyrene microplastics (PS-COOH) are negatively charged particles formed by surface oxidation and functional group modification of polystyrene microplastics (PS), widely used in biomedical and analytical chemistry. However, studies on their neurotoxic effects on aquatic organisms are scarce. This study employed zebrafish (Danio rerio) as a model organism, exposing embryos to environmentally relevant concentrations (0.1, 1, 10, 100 μg·L−1) of PS and PS-COOH. Neurotoxic effects were assessed by measuring tail coiling frequency at 24 hpf and swimming velocity under alternating light/dark cycles at 120 hpf. Results demonstrated that both PS and PS-COOH induced neurotoxicity, with PS-COOH significantly reducing tail coiling frequency and average swimming speed compared to PS (P<0.05). Exposure to 10 μg·L−1 PS-COOH disrupted neurotransmitter homeostasis, altering levels of acetylcholine (ACh), serotonin (5-HT), and γ-aminobutyric acid (GABA). Transgenic zebrafish Tg(huc:EGFP) fluorescence assays revealed that PS-COOH (0.1–100 μg·L−1) caused damage to central neurons. These findings indicate that PS-COOH exposure impairs cholinergic, serotonergic, and GABAergic neurotransmission, induces neuronal damage, and exerts neurotoxic effects on zebrafish larvae. This study provides a theoretical basis for assessing the ecological and health risks of modified microplastics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112102
Based on the 2022 activity data of non-road mobile sources in Hebei Province, this study employed the emission factor method recommended by the Guidelines to estimate emissions of CO, HC, NOx, PM2.5, PM10, and SO2. A comprehensive emission inventory was established, followed by spatial and uncertainty analyses. Scenario analysis, aligned with the 14th Five-Year Plan policies, was used to project emissions for 2030. The results indicate that non-road mobile sources in Hebei emitted 76.1×10^3 t of CO, 20.6×10^3 t of HC, 164.0×10^3 t of NOx, 8.5×10^3 t of PM2.5, 9.0×10^3 t of PM10, and 2.4×10^3 t of SO2. Agricultural machinery was the dominant contributor to CO, HC, PM2.5, and PM10, accounting for over 60.0% of CO emissions. Railway locomotives were the primary source of NOx, contributing 50.9%. For SO2, agricultural machinery and railway locomotives contributed 39.0% and 44.4%, respectively. The highest emitting cities were Tangshan (21.3%), Shijiazhuang (15.7%), Cangzhou (11.6%), and Handan (11.6%). Ship emissions were concentrated in Tangshan Port; civil aviation emissions were mainly in Shijiazhuang, Tangshan, Qinhuangdao, and Handan; railway emissions were distributed in Shijiazhuang, Baoding, and Handan. Under the updated emission standard scenario, NOx and PM10 emissions in 2030 could be reduced by approximately 35.0%. The phase-out of old machinery yielded the largest reduction in CO (36.0%), while both electrification and phase-out scenarios significantly impacted HC emissions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3449-5
The escalating demand for high-performance lithium-ion batteries (LIBs) in portable electronics and electric vehicles has driven extensive research into advanced electrolytes. Ionic liquids (ILs) and their derived electrolytes, including poly(ionic liquids), ionogels, and IL-functionalized systems, offer significant potential for enhancing the safety and electrochemical performance of LIBs due to their unique properties such as non-volatility, wide electrochemical windows, and excellent thermal stability. These properties enable safer, high-energy, and long-lasting batteries. This review conducts a thorough analysis of the physicochemical properties of ILs and their versatile applications in electrolytes, particularly emphasizing their adaptability to fulfill the specific needs of different battery systems. In liquid electrolyte systems, ILs can function as solvents, interfacial modifiers, and critical components for constructing artificial solid electrolyte interphase (SEI). In (quasi-)solid-state electrolyte systems, ILs can be polymerized to form poly(ionic liquid)s or integrated with organic, inorganic, or composite materials to develop IL-based electrolytes, demonstrating multifunctional electrochemical performance. Finally, the review critically examines the challenges and opportunities in this field, offering insightful perspectives for future advancements.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61100-6
Sodium-ion capacitors (SICs) are attractive for low-cost and safe energy storage, but their practical development is limited by sluggish Na+ storage kinetics and structural instability of anodes. Control of both bulk structure and surface chemistry can address these limitations. We report a heteroatom-rich porous carbon (HRPC) derived from spores via hydrothermal pretreatment, low-temperature carbonization, and acid-mediated functionalization. The optimized GLSHC-HNO3 anode exhibits hierarchical porosity and multi-element co-doping, enabling rapid ion/electron transport, improved electrolyte wettability, and abundant Na+ adsorption sites. Density functional theory calculations reveal distinct contributions of different heteroatom configurations to sodium adsorption. The HRPC anode delivers an ultrahigh reversible capacity of 446.1 mAh g−1 at 50 mA g−1, retains 237.3 mAh g−1 at 2 A g−1, and shows excellent cycling stability. A full SIC with a polyaniline-derived porous carbon cathode achieves an energy density of 114.4 Wh kg−1 at 290 W kg−1, 43.1 Wh kg−1 at 1450 W kg−1, and a maximum power density of 5800 W kg−1, with 84.3% capacity retention after 5000 cycles and nearly 100% Coulombic efficiency. This work establishes a scalable, sustainable route for converting biomass into high-value carbon anodes, providing a new pathway for high-performance sodium-ion energy storage.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025101901
Hexachlorobutadiene (HCBD) is a persistent organic pollutant (POP) regulated under the Stockholm Convention. Chlorinated chemical production processes are major sources of unintentional HCBD emissions, posing potential threats to ecosystems and human health. This study systematically reviews the formation, emission, and environmental impact of HCBD from such processes. HCBD is widely generated as a by-product during chlorination stages of producing carbon tetrachloride, dichloroacetylene, tri-/tetrachloroethylene, and chlorobenzene, via free-radical mechanisms. It is released through waste gas, wastewater, and solid waste. In the environment, HCBD exhibits multimedia distribution, undergoing long-range atmospheric transport and adsorbing onto soil and sediments, thereby becoming secondary pollution sources. HCBD shows significant bioaccumulation and food-chain magnification; it is toxic to aquatic organisms and causes hepatic and renal damage with potential carcinogenicity in mammals. Effective pollution control requires combined process improvements and end-of-pipe treatments, supplemented by stringent emission standards and life-cycle management. Future research should focus on developing precise emission inventories, elucidating multi-media transport and transformation mechanisms, and assessing composite ecotoxicological effects, thereby providing scientific support for implementing international conventions and formulating effective prevention strategies.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60622-0
Photocatalytic production of hydrogen peroxide (H2O2) from sustainable biomass-derived carbon catalysts offers a renewable route to valuable chemicals, yet the regulatory role of surface functional groups on reaction kinetics remains underexplored. Here, hydrothermal carbon spheres (CS) rich in oxygen-containing functional groups demonstrated a remarkably high H2O2 production rate of 653 μmol/(g·h) in both pure water and actual seawater, without any sacrificial agent. The catalyst also exhibited outstanding activity in visible-light-driven photocatalytic oxidation of benzylamine to imines, achieving 92% conversion and >99% selectivity. Comprehensive analysis revealed that CS was rich in surface oxygen-containing functional groups, a feature strongly associated with its high photocatalytic efficiency. The observed positive Zeta potential of CS in seawater likely diminished electrostatic repulsion against positively charged intermediates, facilitating their accumulation at the liquid-solid interface. This work proposes a strategic framework for developing metal-free photocatalysts from biomass, offering a sustainable pathway for photocatalytic applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010201
The Guanzhong region, traversed by the Wei River Basin, is one of the most industrially, agriculturally, and medically advanced and densely populated areas in Northwest China, has seen increasing attention paid to the pollution of perfluoroalkyl substances (PFASs) in its surface water environment. This study systematically investigated the pollution characteristics of PFASs in the surface water of this region and their ecological and health risks. By optimizing the online solid-phase extraction-liquid chromatography-tandem quadrupole mass spectrometry (Online SPE-LC/MS/MS), efficient detection of 19 PFASs was achieved, with the method detection limits ranging from 0.2 ng·L−1 to 0.3 ng·L−1, linear correlation coefficients all ≥ 0.990, and spiked recoveries between 75.2% and 130.0%. Monitoring data indicated that PFBA, PFPeA, PFHxA and PFOS, short-chain perfluorinated compounds, were the main pollutants in this region, with high detection frequencies and concentrations, but the overall content was lower than that in most areas of China. The concentrations of PFASs in surface water showed significant seasonal variations, with the highest concentrations during the dry season (∑19PFASs:126.1 — 2584.3 ng·L−1), followed by the normal season (∑19PFASs:3.5—3567.6 ng·L−1), and the lowest during the wet season (∑19PFASs:26.3—294.6 ng·L−1). Ecological risk assessment showed that, except for PFDoDA in the dry season, the ecological risk quotient (RQ) of all other PFASs was < 1. Although the water of the Wei River is not used as direct drinking water, health risk assessment indicated that all PFASs posed low risks, with only PFOA and PFOS showing potential risks (HR > 0.1) to adults and children at some sites during dry/normal seasons. This study provides a scientific basis for PFASs pollution control in the Wei River Basin.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011302
Heavy metal contamination in soil severely compromises the quality and safety of Alisma orientale medicinal materials, and consumption of contaminated herbal preparations poses health risks. To characterize contamination and risks in Sichuan's genuine producing areas, 159 paired soil and plant samples were collected. Concentrations of Cu, Zn, Pb, Cd, and Ni were determined via ICP-OES. Soil pollution was assessed using the Single Pollution Index (Pi), Nemerow Comprehensive Index (Pn), and Potential Ecological Risk Index (RI). Human health risks from heavy metals in Alisma were evaluated via Target Hazard Quotient (THQ) and Hazard Index (HI). Mean soil concentrations were Cu 29.57, Zn 61.86, Pb 29.51, Cd 1.77, and Ni 28.08 mg·kg−1. Except for Cd, all elements were below agricultural soil screening values. Pi and Pn confirmed Cd contamination, with Cd posing slight to strong potential ecological risks. Cu, Cd, Pb, and Ni showed highly significant positive correlations, indicating common origins. Heavy metal concentrations in Alisma did not exceed pharmacopeial limits. The plant exhibited strong Zn enrichment but weak accumulation of Cu, Cd, and Pb, and negligible Ni enrichment. THQ and HI values indicated no potential health risks under current exposure. Quantitative assessment is critical for soil pollution control, safe cultivation, and medication safety.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011503
This study investigated odor emissions from a large-scale ink manufacturing enterprise through comprehensive analyses of odor concentration, substance concentration, and characteristic odor compounds across all exhaust stacks. The aim was to assess odor dispersion patterns and identify critical odor-generating processes to inform strategic upgrades of air pollution control systems. The results showed that acrolein, hydrogen sulfide, isobutyraldehyde, m-xylene, p-xylene, and ethanol were screened as typical odor substances, with acrolein being ubiquitously present across all emission processes. The odor dispersion radius extended 1.4–2.6 km beyond the facility boundary. Vertical odor impact at a sensitive point 1 km from the plant boundary revealed a parabolic profile: concentrations initially increased with height, peaked at 30 m (equivalent to a 10-story building), then decreased at higher heights. The exhaust stack of the sewage treatment station accounted for 53.26% of total odor emissions, establishing this system as the priority control node for implementing enhanced air purification technologies in industrial air quality management.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225264
The high cost of high-purity hydrogen necessitates the utilization of low-cost industrial by-product hydrogen as an alternative gas source to reduce hydrogen storage costs. Industrial by-product hydrogen typically contains impurities such as H2S and CO, yet the poisoning mechanisms of these gases on superlattice hydrogen storage alloys during hydrogen absorption/desorption remain poorly understood. This study systematically investigates the poisoning effects and regeneration behavior of La0.65Mg1.32Ca1.03Ni9Y0.17 superlattice hydrogen storage alloy in atmospheres containing 10^-3 H2S and CO. The experimental protocol comprised 10 poisoning cycles followed by 1 regeneration, repeated to total 20 poisoning cycles and 2 pure hydrogen regenerations. Results show that in pure hydrogen, the alloy's hydrogen storage capacity gradually decreases after 22 cycles but is effectively restored after dehydrogenation at 473 K. In the presence of impurity gases, the hydrogen storage capacity retention rates after 10 poisoning cycles with H2S and CO are 3.56% and 2.71%, respectively; after 20 cycles, these decrease to 3.68% and 1.73%, respectively. After dehydrogenation at 473 K, retention rates recover to 40.35% and 98.27%, respectively. This indicates that poisoning severity follows the order CO > H2S, while regeneration difficulty follows H2S > CO. X-ray diffraction analysis reveals that after poisoning, the main phase transforms from AB3 to AB3H, but reverts to AB3 after high-temperature dehydrogenation. X-ray photoelectron spectroscopy shows that after H2S poisoning, CaS and CaSO4 form on the alloy surface, indicating irreversible chemical adsorption. In contrast, after CO poisoning, no new substances are detected, indicating reversible adsorption. This study clarifies the differentiated poisoning mechanisms of impurity gases and provides theoretical support for the application of rare-earth superlattice hydrogen storage alloys in complex atmospheres.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225162
The effects of tempering temperature on the microstructure, strength-toughness balance, and precipitates of a quenched Cu-Cr-Ni ultra-high strength weathering steel were systematically investigated. The steel was austenitized at 920°C, quenched, and then tempered at 500°C, 550°C, and 600°C. Microstructural characterization was performed using optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), while mechanical properties were evaluated via tensile and low-temperature impact tests. Results showed that as the tempering temperature increased from 500°C to 600°C, the microstructure transformed from lath-shaped tempered sorbite to a non-lath morphology. The fraction of rod-like cementite decreased, while spheroidized cementite increased, and the size of MC (M = Ti, Nb, V, Mo) precipitates decreased from an average of 12.2 nm to 9.9 nm. Consequently, yield strength and tensile strength decreased from 935 MPa and 958 MPa to 866 MPa and 888 MPa, respectively, whereas total elongation and impact energy at -40°C increased continuously, reaching maximum values of 5.0% and 280 J at 600°C. When tempered at 550°C, the steel exhibited a yield strength of 895 MPa, tensile strength of 921 MPa, elongation of 4.3%, and impact energy of 271 J at -40°C, demonstrating an optimal combination of strength and toughness. This improvement is primarily attributed to the spheroidization of cementite and the uniform dispersion of fine MC precipitates, which alleviate stress concentration, along with the softening of the acicular ferrite matrix during tempering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3717-6
Poly(ethylene oxide) (PEO)-based all-solid-state polymer electrolytes (SPEs) hold significant promise for high-specific-energy and high-safety Li batteries, yet suffer from poor mechanical robustness and low Li+-conducting efficiency. Aramid nanofibers (ANFs), with exceptional mechanical strength and abundant intramolecular/intermolecular interactions, are effective additives, but their strictly symmetric interchain interactions generate a highly ordered hydrogen-bond network, producing inert aggregates that compromise electrolyte stability. Here, we construct a poly(ethylene glycol) (PEG)-mediated asymmetric interaction between ANF chains. PEG chains introduce weaker H-bonding acceptor sites, higher steric hindrance, and abundant lithiophilic groups, simultaneously disrupting strong symmetric ANF-ANF interactions and creating rapid Li-ion channels. The resulting electrolyte maintains excellent mechanical properties (yield stress of 3.25 MPa) and enables stable cycling of Li||Li symmetric cells for over 1600 h with low polarization voltage. In LCO||Li cells, the electrolyte achieves a capacity retention of 82.7% after 300 cycles at 1 C, markedly higher than the unmodified counterpart (35.5%). This synergistic optimization of interfacial compatibility and mechanical performance demonstrates a practical route toward safe, high-energy-density all-solid-state polymer batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3876-5
Electromagnetic interference (EMI) shielding technology is evolving from traditional bulky metal enclosures toward ultrathin, conformable, and flexible films. However, as the thickness of the shielding layer decreases, the electromagnetic wave absorption efficiency significantly deteriorates, leading to a marked decline in overall shielding performance. To overcome this intrinsic 'thickness–performance dilemma', porous structural designs are often employed to enhance multiple internal reflections and absorption. Nevertheless, such strategies typically suffer from uncontrollable thickness, poor spatial uniformity, and low process compatibility. To address these challenges, a joint team from the Gwangju Institute of Science and Technology and Seoul National University proposed an embedded MXene-in-metal (EXIM) shielding strategy. By embedding a non-porous MXene layer within a metallic film, a metal–MXene–metal heterolamellar architecture was constructed. Remarkably, this ultrathin structure achieves an EMI shielding effectiveness of ~70 dB at only ~1 μm thickness (up to 80 dB at 1.9 μm), breaking the conventional trade-off between reduced thickness and performance degradation. The superior performance originates from the conductivity contrast between the metal and MXene layers, which forms electromagnetic confinement wells. The localized electromagnetic waves undergo multiple polarization losses induced by interfacial dipoles, resulting in efficient energy absorption at thin thicknesses. The study further reveals that the EMI shielding performance of EXIM films primarily depends on the number of metal–MXene heterointerfaces rather than the total thickness. Multilayer stacking (e.g., Cu/Ti3C2Tx/Cu) notably enhances absorption efficiency while imparting excellent isotropy and flexibility. Moreover, introducing a Cr–Al dual-metal passivation layer effectively suppresses MXene oxidation, ensuring long-term operational reliability. The EXIM films are compatible with conventional fabrication and packaging techniques, including physical vapor deposition and spray coating, enabling scalable and large-area production. Practical demonstrations in USB 3.0 chips and flexible Schottky diodes confirm their outstanding capability in mitigating Bluetooth interference and blocking electromagnetic noise. This work is pioneering in that it introduces a new shielding mechanism based on conductivity contrast-induced electromagnetic confinement, achieves ultrahigh shielding effectiveness and mechanical flexibility within an ultrathin (<2 μm) structure, and elucidates a dipole-dominated interfacial polarization loss mechanism that provides theoretical insights into the design of 2D-material-based heterostructured shielding systems. Moreover, it opens up a new path for EMI shielding to shift from 'thick structure reflection' to 'heterogeneous interface confined absorption', providing a novel solution for realizing free-form, interference-free intelligent electronic packaging.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511034
Ionizing radiation (IR) is an emerging advanced oxidation process for degrading recalcitrant organic pollutants in water, but its efficiency is often hampered by matrix effects from coexisting substances in real wastewater. This study coupled three pretreatments—coagulation sedimentation, adsorption, and biological oxidation—with electron beam IR to treat a model cephalosporin wastewater containing cefotaxime sodium (CTX) and typical coexisting components. The results showed that all coupled systems significantly improved treatment performance compared to direct IR: COD removal increased by 19%–42% and CTX removal by 8.4%–19%. Under the tested conditions, the optimal coagulant was polymeric ferric sulfate (PFS), the optimal adsorbent was activated carbon, and the optimal aeration time for biological oxidation was 6 h. All three pretreatments reduced matrix effects, with adsorption, biological oxidation, and coagulation sedimentation lowering the matrix effect by 17%, 11%, and 9%, respectively. Quantum chemical calculations and LC-MS analysis predicted radical reaction sites on CTX and revealed five possible degradation pathways. The study demonstrates that pretreatment-IR coupling is an effective strategy to mitigate matrix effects and enhance the targeted degradation of antibiotics in complex wastewater matrices.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510018
Scientific assessment and prediction of the stabilization process in aged municipal solid waste (MSW) landfills are critical for reliable risk evaluation and remediation decision-making. Existing methods often fail under data-scarce conditions and lack temporal predictive capability. This study establishes a 'spatial characterization–temporal prediction' framework to address these gaps. The methodology integrates grid-based sampling, laboratory analysis of biological stability indicators (AT4), and LandGEM model simulations to assess current stabilization states and predict completion timelines. Applied to a landfill in southwest China, results reveal significant spatial heterogeneity in waste stabilization, strongly correlated with waste age and influenced by leachate recirculation of membrane concentrate. None of the landfill zones had reached full stabilization; predicted times to completion were: Zone D (17 years), Zone C (13 years), Zone B (8 years), and Zone A (1 year). Based on these findings, a systematic management strategy is proposed, including zoned gradient management, targeted control of lag zones, and dynamic planning. This study provides a theoretical basis for site-specific management and serves as a reference for similar landfills.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030501
Coastal areas serve as critical ecological interfaces for the migration of terrestrial microplastics (MPs) into the ocean, and characterizing their pollution is essential for integrated coastal management. This study investigated the occurrence, sources, and ecological risks of MPs in surface waters of nearshore areas and river estuaries around Hainan Island, a typical tropical tourist island. MPs abundance ranged from 316.67 to 1300 n·m−3 in seawater and from 400 to 5416.67 n·m−3 in river water. In seawater, the dominant polymer was polyethylene terephthalate, with fibers being the predominant shape, size class 500–1000 μm, and white/transparent color. In river water, polypropylene-ethylene copolymer dominated, also as fibers, but with size class 100–500 μm and white/transparent color. Seawater MP abundance showed a significant positive correlation with tourist numbers, and distribution across functional areas followed: tourism areas > natural areas > aquaculture areas > residential areas. Multiple correspondence analysis identified household plastic waste, laundry wastewater, aquaculture, and fishery products as primary sources of seawater MPs. Principal component analysis indicated homologous characteristics between seawater and river MPs, suggesting rivers are a major pathway for terrestrial MP transport to coastal zones. Ecological risk assessment revealed low pollution loads, with potential ecological risks moderate for seawater and medium-low for river water. Notably, 15% of seawater sampling sites exhibited polymer risk level Ⅳ, primarily driven by polyacrylonitrile's high biological toxicity. These findings provide a scientific basis for developing MP pollution control strategies in Hainan Island.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030403
Microplastics (MPs) act as vectors for co-migrating antibiotics and heavy metals, forming complex pollution systems with potential joint toxicity. However, the differential adsorption behaviors and underlying mechanisms of MPs toward organic versus inorganic pollutants remain insufficiently understood. This study selected polypropylene (PP) microplastics, a major component of agricultural plastic films, and investigated the adsorption of sulfamethoxazole (SMX) and Cr(VI) onto aged PP under varying environmental conditions. Results demonstrated that aging increased the maximum adsorption capacity by 2–3 times for both pollutants. Notably, aged PP exhibited approximately 30 times higher adsorption capacity for SMX than for Cr(VI). Characterization revealed that aging introduced oxygen-containing functional groups (e.g., carbonyl) on the MP surface, enhancing adsorption. Mechanistic analysis indicated that hydrogen bonding and electrostatic interactions dominated SMX adsorption, while Cr(VI) adsorption was primarily governed by electrostatic interactions and pore-filling. The stronger intermolecular forces for SMX compared to reversible pore-filling for Cr(VI) explained the observed differences. Increasing pH induced electrostatic repulsion, reducing adsorption of both pollutants. High concentrations of Na+ and Mg2+ caused charge shielding, potentially enhancing Cr(VI) adsorption but inhibiting SMX adsorption due to competition for active sites. The presence of organic matter (humic acid) had negligible effects on Cr(VI) adsorption but reduced SMX adsorption, likely due to complexation. These findings elucidate distinct molecular-level pathways for organic versus inorganic pollutant adsorption on aged MPs, highlighting the roles of hydrogen bonding and pore-filling in driving differential behaviors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3929-4
Hydrogels are extensively utilized in biomedical fields such as drug delivery, tissue engineering, and wound dressings due to their excellent biocompatibility, high water content, and tunable physicochemical properties. However, conventional hydrogels often undergo uncontrolled swelling in physiological environments, leading to mechanical degradation, structural destabilization, and functional failure, which severely restricts their long-term applicability. Recent advances have focused on developing anti-swelling hydrogels with equilibrium swelling ratios typically below 150%, achieved through strategies including the introduction of hydrophobic interactions, enhancement of cross-linking density, and incorporation of nanocomposite structures. These approaches significantly improve dimensional stability and mechanical integrity under physiological conditions. This review systematically summarizes the common preparation strategies for anti-swelling hydrogels and highlights their latest progress in biomedical applications, including wound dressings, tissue adhesives, and implantable devices. The advantages and future directions, such as smart responsiveness and multifunctional integration, are critically discussed. The review aims to provide theoretical guidance and technical references for the development of next-generation high-performance medical hydrogel materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3823-4
The global demand for chlorine gas continues to rise, driven by its indispensable role in chemical synthesis, disinfection, and wastewater treatment. Electrocatalytic chlorine evolution from seawater presents a promising alternative to the energy-intensive chlor-alkali process, yet it is hampered by the competing oxygen evolution reaction and the sluggish kinetics of chlorine evolution on conventional catalysts. Here, we report a novel hollow porous CoNiSe2/NiSe2 heterostructure nanosheet array synthesized via ion exchange and calcination, which exhibits exceptional catalytic activity and selectivity for the chlorine evolution reaction in acidic seawater-like electrolytes. The unique hollow porous morphology provides a high specific surface area, facilitating mass transport and exposing abundant active sites. Crucially, the heterointerface between CoNiSe2 and NiSe2 promotes d-p orbital hybridization between Co/Ni 3d and Se 4p states, which lowers the reaction energy barrier for chlorine evolution. The catalyst achieves a low overpotential of 108 mV to reach a current density of 100 mA cm−2 in 4.0 M NaCl acidic medium, with excellent stability and Cl2 selectivity. This work demonstrates the potential of non-noble metal selenides as efficient and durable catalysts for chlorine production, offering a pathway toward more sustainable chlor-alkali technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3976-x
The discovery of high-temperature superconductivity in bilayer nickelate La3Ni2O7−δ (La-327) under high pressure and in thin films at ambient pressure has opened new avenues in superconductivity research. However, La-327 exhibits a narrow phase stability range, leading to stacking faults that suppress bulk superconductivity. Chemical substitutions, particularly at the A-site with smaller rare-earth ions, have been shown to enhance phase purity and reduce stacking faults, while also increasing the orthorhombic distortion and chemical pressure. In this work, we apply the high-entropy (HE) strategy to stabilize the 327 phase with reduced average A-site ionic radius (rA). We successfully synthesized medium-entropy La1.2Pr0.6Nd0.6Sm0.6Ni2O7−δ (ME-327) and high-entropy La0.67Pr0.67Nd0.67Sm0.33Eu0.33Gd0.33Ni2O7−δ (HE-327) polycrystalline samples. These compositions satisfy medium- and high-entropy criteria, with rA values of 1.181 Å and 1.164 Å, respectively. The samples are phase-pure and homogeneous. HE-327 exhibits the lowest cell volume, largest orthorhombicity, and shortest interlayer Ni-Ni distance among reported bilayer nickelates. Physical property measurements reveal low electrical conductivity and a high density-wave (DW) transition temperature. Under high pressure, HE-327 shows a resistivity anomaly at 103 K under 31 GPa, suggesting a possible superconducting transition. Extrapolation indicates that Tc under high pressure exceeds 100 K for HE-327, correlating with reduced rA and enhanced interlayer coupling. Our results demonstrate the ionic size effect and the effectiveness of the HE approach in stabilizing bilayer nickelates, providing a new avenue for developing superconducting materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607007
Printing and dyeing sludge (PDS) fly ash is often classified as hazardous waste due to its high content and diversity of heavy metals (HMs). This study co-disposed PDS fly ash and heavy metal-contaminated soil to produce sintered ceramsites, investigating the effects of sintering conditions on physical properties and HM migration/transformation, and elucidating the immobilization mechanisms. The optimal sintering process was identified as preheating at 400 °C for 10 min, followed by sintering at 1150 °C for 10 min. The resulting ceramsites exhibited a 1-h water absorption of 2.7%, a bulk density of 830 kg/m³, HM volatilization rates below 15%, and a residual fraction (F4) proportion exceeding 86%. Characterization revealed that during sintering, HMs were encapsulated by the glassy phase and reacted with amorphous silica-alumina to form stable silico-aluminates, synergistically reducing HM mobility. However, sintering temperatures ≥1200 °C destabilized the ceramsite structure, causing secondary HM release. This research provides an efficient and simple route for the resource utilization of dyeing sludge fly ash and contaminated soil.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3892-2
Single-atom co-catalysts on semiconductor substrates offer a cost-efficient route to enhance photocatalytic performance with minimal precious metal loading. However, precise tuning of local coordination environments and construction of efficient single-atom co-catalysts remain challenging for overall water splitting. Here, we employ an icing-assisted photochemical reduction strategy to anchor atomically dispersed Pt species as hydrogen evolution co-catalysts on Al3+-doped SrTiO3 (Pt SA-STO). The optimized Pt SA-STO exhibits remarkable activity, with hydrogen and oxygen evolution rates of 13.62 and 6.71 mmol h−1 g−1, respectively, and a turnover frequency (TOF) of 2114.5 h−1. We pioneer the use of nuclear magnetic resonance (NMR) spectroscopy to quantitatively track the temporal evolution of Pt4+ to Pt2+ under continuous irradiation during the icing-assisted photoreduction. Advanced characterizations and theoretical calculations confirm that single-atom Pt co-catalysts facilitate directional transfer and extraction of photogenerated charge carriers, effectively suppressing surface recombination. This work provides insights into designing novel single-atom co-catalysts by deepening understanding of electronic configurations and active sites in photocatalytic overall water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3982-6
Skin wounds are refractory due to antibiotic-resistant bacterial infection. Although photodynamic therapy (PDT) offers noninvasiveness, high efficiency, and no drug resistance, its therapeutic effect is constrained by the complex structure of wound tissue and diffuse drug distribution. The proinflammatory cytokine tumor necrosis factor-like weak inducer of apoptosis (TWEAK) regulates tissue repair by engaging its receptor Fn14, which is highly expressed in wounds. In this study, we developed a novel photosensitizer, the selenoviologen-TWEAK conjugate (SeV-Tp), to enhance selective enrichment and synergistically promote wound healing. In vitro analyses demonstrated that SeV-Tp, under visible light, generated high levels of reactive oxygen species, resulting in potent antibacterial activity against both Gram-positive and Gram-negative bacteria. Notably, SeV-Tp selectively bound to Fn14 and amplified fibroblast activation via photodynamic cooperation. In a mouse model of antibiotic-resistant Pseudomonas aeruginosa-infected wound, SeV-Tp accelerated healing by reducing bacterial burden, modulating the immune microenvironment, promoting collagen deposition, and stimulating hair follicle regeneration. Moreover, SeV-Tp preferentially accumulated within wound tissues with minimal adverse effects. SeV-Tp represents a strategy that selectively enriches and harnesses synergistic benefits from both components, positioning SeV-Tp as a promising photosensitizer for the treatment of refractory wounds.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60672-X
Dry reforming of methane (DRM) converts CH4 and CO2 into syngas, offering a route to mitigate greenhouse gases. Ni-based catalysts suffer from sintering and carbon deposition at high temperatures. This work employs MgO-MgAl2O4 composite supports to regulate Ni loading and introduces Ce, La, and Zr as promoters to investigate their effects on DRM activity, structural stability, and surface oxygen species. Optimal Ni loading of 12.5% yields highest CH4 and CO2 conversions. Promoter introduction slightly suppresses low-temperature activity but substantially modifies support local structure and metal-support interface, improving NiO dispersion and increasing surface oxygen vacancies and active oxygen species (Oβ). These changes enhance CO2 adsorption-activation and suppress carbon deposition. After 20 h DRM, Ce-promoted catalyst shows smallest Ni particle growth (6.23→8.07 nm) and lowest carbon deposition, demonstrating superior stability and anti-coking capability. The study elucidates how Ce, La, and Zr enhance sintering and coking resistance via interfacial electronic modulation and improved oxygen storage/release, guiding rational design of stable Ni-based DRM catalysts.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60762-1
The CO2 dry reforming of methane (DRM) is pivotal for CO2 utilization within the dual-carbon framework, offering advantages in carbon reduction and value-added chemical production. However, shaped catalysts suitable for industrial-scale DRM remain limited. This work constructs a monolithic catalyst using honeycomb cordierite as the structural support, systematically investigating the effects of organic and inorganic binders on coating structure and catalytic performance. Comparative studies reveal that the active coating fabricated with inorganic aluminum sol exhibits a continuous uniform morphology and excellent adhesion strength. During high-temperature calcination, elemental diffusion within Al2O3 networks bridges the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This creates robust metal-support interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provides superior pore confinement, contributing to strong coating adhesion, enhanced activity, and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, coatings derived from inorganic silica sol suffer from detachment and activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrate inferior performance in macroscopic coating uniformity, adhesion strength, mesoporous confinement, and localized electronic effects, resulting in the poorest catalytic performance. By optimizing aluminum sol coating parameters—binder content, active component dosage, and coating cycles—a synergistic balance between coating thickness and mass transfer is achieved. The optimized catalyst demonstrates excellent DRM performance, providing insights for constructing high-performance shaped catalysts with cordierite coatings.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608008
Medium-chain fatty acids (MCFAs), including caproate and caprylate, are promising biobased products with high energy density, hydrophobicity, and chemical conversion value, serving as key intermediates linking organic waste valorization to circular economy development. Compared to conventional anaerobic digestion for methane, chain elongation (CE) via reverse β-oxidation (RBO) converts short-chain intermediates (e.g., acetate, lactate, ethanol) into higher-value carboxylic acids, offering a novel route for resource recovery from sewage sludge, food waste, agricultural residues, livestock manure, and high-strength organic wastewater. However, natural mixed-culture CE systems face constraints from substrate composition fluctuations, electron donor competition, methanogenic carbon diversion, insufficient product selectivity, product toxicity, and high separation costs, hindering stable, efficient, and targeted MCFA production. This review systematically summarizes the metabolic mechanisms, artificial regulation strategies, and engineering bottlenecks in CE-based MCFA production, emphasizing directed recovery of carbon and electron resources from organic wastes. Future directions include stable continuous-flow operation, product separation and recovery, techno-economic assessment, and life cycle evaluation. The review aims to provide insights for high-value organic waste utilization and synergistic optimization of carbon and energy recovery.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608025
To evaluate heavy metal contamination and human health risks in desert lakes, this study analyzed concentrations of seven heavy metals (Hg, Pb, Cu, Zn, Cd, Cr, As) in Hongjiannao Lake, Northern Shaanxi, from 2013 to 2024. The absolute principal component score-multiple linear regression (APCS-MLR) model quantitatively apportioned pollution sources, and a health risk assessment model evaluated non-carcinogenic and carcinogenic risks. Results showed average concentrations of the seven metals did not exceed background values, but 28.57% of sampling points exceeded background for As, with a maximum exceedance factor of 1.92. Total average concentration decreased from 112.51 μg/L (2013–2016) to 58.80 μg/L (2017–2024), attributed to the 2016 closure of small coal mines and ecological restoration around the 4A scenic area. Source apportionment identified four sources: industrial (35.44%), agricultural (24.67%), natural (23.65%), and traffic (16.23%), indicating industrial dominance. Non-carcinogenic risks were negligible, but carcinogenic risks exceeded the alert value (1×10⁻⁴), with adults at higher risk than children. Oral ingestion was the primary exposure pathway. As and Cd were key control elements, with exceedance rates of 100% and 16.67%, respectively. These findings provide a theoretical basis for health risk prevention and environmental management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3843-9
Lignocellulose-based electromagnetic interference (EMI) shielding materials are gaining prominence across multiple sectors, driven by the growing EMI issues associated with rapid advances in communication technologies and electronic devices. These materials have demonstrated significant superiority over traditional EMI shielding solutions, which are often hampered by high cost and environmental concerns. This review emphasizes the excellent potential of lignocellulose as a cost-effective and flexible alternative to deliver the hierarchical structures and functional properties that qualify it for EMI shielding applications. The underlying EMI shielding mechanisms are then elucidated, with a focus on the benefits conferred by lignocellulose in such material systems. Furthermore, typical fabrication strategies for lignocellulose-based EMI shielding materials are comprehensively summarized, along with a discussion of their emerging applications in diverse scenarios. Finally, the challenges encountered in developing lignocellulose-based EMI shielding materials and their significant prospects for future boosting high-performance design and application are also outlined. The insights presented herein are expected to promote the development of efficient and green lignocellulose-based EMI shielding materials that meet the evolving demands of modern society.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4007-x
Hydrogels, with their hydrophilicity, flexibility, and environmental friendliness, are highly desirable for moisture-electric generators (MEGs) that harness ubiquitous moisture to generate electrical energy. As the active material layer in MEGs, hydrogels play a crucial role in absorbing atmospheric moisture and converting chemical potential energy into electricity. However, the relatively low output current of the device and the instability of hydrogels pose challenges to the development of high-performance hydrogel-based MEGs. Herein, we introduce a straightforward, feasible, cost-effective, and versatile two-step solvent displacement strategy to overcome the barrier associated with the development of MEGs. Through tunable solvent interactions of glycerol and water, the moisture absorption capability and stability of the hydrogel can be improved, while promoting favorable ion migration. Such an effective processing route not only significantly boosts the output performances but also greatly improves the long-term durability of hydrogel-based MEGs. Notably, the current output and power density of the treated MEGs can increase by up to two orders of magnitude. The mechanisms behind the intriguing observation are investigated by various characterizations and theoretical calculations. This universal strategy holds promise to be extended to various hydrogel-based MEGs. Moreover, the MEGs can be used for energy harvesting, self-powered respiratory monitoring, and non-contact humidity detection. This work offers new opportunities for advancing green energy and self-powered technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4033-1
Photodetectors are critical components in modern optoelectronic systems, underpinning applications in optical communication, low-altitude economy, environmental monitoring, and national defense. Layered two-dimensional (2D) materials such as MoS2, WS2, black phosphorus (BP), and ReS2 have attracted extensive attention due to their remarkable electronic and optical properties, including facile mechanical exfoliation and tunable characteristics via thickness engineering. The absence of dangling bonds enables the construction of van der Waals (vdW) heterostructures free from lattice-matching constraints, promoting efficient charge transport, enhanced light absorption, and suppressed dark current. Among layered materials, semimetals such as graphene, PdTe2, MoTe2, and TaIrTe4 exhibit narrow or zero bandgaps, enabling ultrabroadband spectral responses from ultraviolet (UV) to terahertz (THz). ZrTe3, a layered gapless semimetal, demonstrates pronounced carrier transport features, including robust excitons and ultrafast carrier relaxation times, making it an ideal candidate for photodetection. However, pure ZrTe3-based photodetectors suffer from substantial dark current due to the absence of an energy bandgap, degrading signal-to-noise ratio and specific detectivity (D*). This work reports a high-performance broadband photodetector based on a ZrTe3/CuInP2Se6 heterostructure. By exploiting an asymmetric contact configuration that introduces a Schottky barrier, the device effectively suppresses dark current while enhancing photoresponse. The photodetector exhibits broad spectral sensitivity from UV to near-infrared (355–1177 nm), microsecond-level response speed, and high responsivity and specific detectivity. Beyond conventional photodetection, an optoelectronic information encryption-decryption application is demonstrated, where modulated light and bias voltage serve as dual input channels to encode and decode ASCII signals. This study resolves the challenge of high dark current in semimetal-based photodetectors and introduces a multifunctional platform for secure optoelectronic communication, highlighting the potential of ZrTe3 for next-generation photonic and quantum information technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4081-y
The evolution of precision medicine has propelled multimodal imaging-guided phototheranostics to the forefront for precise tumor diagnosis and therapy. Low-temperature photothermal therapy (PTT) offers a promising approach for the treatment of melanoma due to its non-invasiveness and minimal damage to normal tissues. However, its efficacy is limited by cancer cell thermal tolerance. To address this, a new type of multifunctional energy disruptor (CAMeO-Q NPs) is developed featuring homologous targeting and mitochondria targeting, and synergistically enhancing low-temperature PTT in melanoma by reversing heat shock protein 90 (Hsp90)-mediated thermal tolerance and blocking mitochondrial adenosine triphosphate (ATP) biosynthesis. The multifunctional energy disruptor enables precise trimodal imaging (fluorescence imaging/FLI, photoacoustic imaging/PAI, and photothermal imaging/PTI) guidance for low-temperature PTT. Comprising a mitochondria-targeting photothermal agent and an Hsp90 inhibitor, CAMeO-Q NPs induce selective mitochondrial damage under 660 nm laser irradiation and downregulate cellular HSP expression by ATP inhibition and Hsp90 inhibitor. This multifunctional energy disruptor provides a novel strategy for enhancing multimodal imaging-guided low-temperature photothermal therapy through combined homologous targeting, mitochondria-targeting, and Hsp90 inhibition.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60663-9
The catalytic hydrogenation of biomass-derived dimethyl succinate (DMS) to 1,4-butanediol (BDO) is a pivotal route for producing high-value C4 chemicals in green chemistry. Cu/SiO2 catalysts are known for high selectivity in hydrogenating ester groups, with performance correlated to copper species microstructure. Although calcination critically defines this active structure, systematic influence of calcination atmosphere remains underexplored. Here, Cu/SiO2 catalysts were prepared via urea-assisted hydrothermal method and calcined under different atmospheres to elucidate effects on physicochemical properties and hydrogenation performance. Comprehensive characterization (N2 physisorption, FT-IR, H2-TPR, XRD, TEM, N2O pulse chemisorption, XPS, NH3-TPD) revealed that calcination atmosphere profoundly alters metal-support interaction, regulating dispersion and chemical state of copper species. Specifically, air calcination promoted stronger metal-support interaction, enhancing copper dispersion and increasing proportion of key active Cu+ species. Consequently, air-calcined catalyst achieved 92.37% DMS conversion and 64.15% BDO yield under optimized conditions (210 °C, 5.0 MPa, WHSV 0.6 h−1, H2/DMS molar ratio 100). This work underscores calcination atmosphere engineering as potent strategy for optimizing metal-support interactions in heterogeneous catalysts for efficient hydrogenation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3510-0
The activity and stability of single-atom catalysts (SACs) are intimately associated with the structure of supports. Herein, by employing a van der Waals (vdW) heterostructure support, we construct a highly active and durable Pt SAC for hydrogen evolution reaction (HER). The unique support consists of monolayer MoS2 attaching on hierarchical N-doped carbon nanocages (hNCNC), on which Pt presents as individual single atoms on the hNCNC and as island-like single-atom layers on the MoS2. The optimized Pt1-MoS2/hNCNC demonstrates low overpotential (11 mV at 10 mA cm−2) and high mass activity (5.6 A mgPt−1 at −20 mV) in 0.5 M H2SO4 solution, outperforming commercial Pt/C. Impressively, the Pt1-MoS2/hNCNC exhibits improved long-term stability in proton exchange membrane water electrolyzer relative to commercial Pt/C. The excellent HER performance is attributed to the regulated electronic structure, robust interaction of Pt atoms with MoS2/hNCNC and facilitated charge transfer. This study establishes an innovative strategy to develop a highly active and durable Pt SAC using vdW heterostructure supports.