SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4464-9
Topological polarization textures have transitioned from theoretical predictions to experimental observations over two decades, yet their stabilization has remained largely confined to low-dimensional architectures where geometric confinement balances depolarization, strain, and gradient energies. Extending these textures into bulk ferroelectrics and quantitatively linking them to macroscopic electromechanical properties constitutes a persistent challenge. Wu et al. address this by engineering vortex and antivortex domains in bulk rhombohedral 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-30PT) crystals. Phase-field simulations reveal that increasing vortex core density from 6 to 27 μm⁻² enhances the dielectric constant (ε33/ε0) and piezoelectric coefficient (d33) by approximately 3.5-fold and 3.4-fold, respectively, correlating with increased polarization curl. Experimentally, a mechanically assisted direct-current poling (MDCP) strategy elevates vortex core density from 0.01 to 21 μm⁻², boosting d33 from 1380 to 1820 pC·N⁻¹ and ε33/ε0 from 4,630 to 6,230. This mechanically driven approach enables controllable manipulation of topological domain architectures in bulk crystals without nanoscale confinement, offering a scalable route for functional optimization. The work establishes bulk ferroelectrics as a platform for topology-mediated electromechanical design, introducing an additional degree of freedom for enhancing piezoelectric performance in three-dimensional crystals.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4418-7
Glioblastoma (GBM) remains the most lethal primary brain tumor, with the blood-brain barrier (BBB) severely restricting effective treatment options. Immunotherapy has achieved remarkable success in cancers such as lung cancer and melanoma, yet its efficacy in GBM is constrained by the immunosuppressive tumor microenvironment and a paucity of tumor-infiltrating T cells. This study developed a biomimetic nanocomposite for the co-delivery of an immunogenic cell death (ICD) inducer and an indoleamine 2,3-dioxygenase 1 (IDO-1) inhibitor to overcome these challenges. Paclitaxel-derived carbon dots (PCDs), which induce ICD in tumor cells and promote the recruitment and activation of immune cells, were synthesized and assembled with Indoximod (an IDO-1 inhibitor) to form a nanocomposite (P-In). A biomimetic coating was subsequently applied to create M@P-In. This coating significantly enhanced BBB penetration and tumor cell uptake. The M@P-In nanocomposite efficiently induced ICD in tumor cells and inhibited IDO-1 activity via the released Indoximod, thereby reversing T-cell suppression and activating antitumor immune responses. Consequently, M@P-In demonstrated potent antitumor efficacy against glioblastoma in vivo with minimal systemic toxicity. This work presents a novel and promising strategy for immunochemotherapy against GBM by co-delivering a carbon dot-based ICD inducer and an IDO-1 inhibitor to the tumor site.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4309-8
Iridium-doped cobalt oxide nanosheets derived from a ZIF template were evaluated as oxygen evolution reaction (OER) catalysts for proton exchange membrane water electrolysis (PEMWE). Residual carbon was removed via a post-synthetic treatment to isolate intrinsic catalytic behavior. The Ir0.23Co0.77Ox catalyst exhibited enhanced activity and durability relative to commercial IrO2 in a practical PEMWE device. Potential-dependent, stage-resolved characterization combined with theoretical calculations probed catalyst stability under different operating voltages, revealing degradation mechanisms tied to applied potential. Contact angle measurements showed that the Ir0.23Co0.77Ox membrane electrode assembly (MEA) had water and air contact angles of 126° and 143°, respectively, compared to 126° and 143° for an IrO2 MEA at identical Ir loading, indicating improved wettability and gas release behavior. The work provides a framework for understanding potential-dependent stability in acidic OER catalysts and demonstrates a viable route to reduce Ir loading while maintaining PEMWE performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4262-7
The escalating demands of artificial intelligence, machine learning, and neural computing necessitate multifunctional optoelectronic devices capable of integrating sensing, memory, and processing. Two-dimensional van der Waals heterostructures (vdWHs) offer unique advantages, yet their practical deployment is hindered by complex architectures and inefficient mode-switching. Here, we demonstrate a MoTe2/SnS2 anti-ambipolar heterojunction device enabling single-gate reconfiguration among frequency doubling, broadband photodetection, and neuromorphic computing. The device exhibits a peak-to-valley ratio (PVR) of 465, ensuring efficient frequency doubling. As a photodetector, it operates across an exceptionally broad spectral range of 520–2200 nm, with outstanding responsivity and detectivity. Furthermore, the device emulates complete synaptic behaviors, including short-term plasticity (STP), long-term plasticity (LTP), and paired-pulse facilitation (PPF). Integrated into a reservoir computing (RC) system trained on a vehicle motion dataset, it achieves a directional recognition accuracy of 98.7%. This work establishes a paradigm for multifunctional integration and low-power neuromorphic computing, advancing next-generation intelligent optoelectronic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4235-6
Fluorite-structured oxides (HfO2, ZrO2) are promising for resistive random-access memory (RRAM) due to their scalability and tunable properties. However, achieving high resistive switching on/off ratios remains challenging. Here, we report a collaborative strategy combining Hf/Zr ratio optimization and Lu3+ doping to regulate band structure and oxygen vacancy concentration in Hf0.4Zr0.6O2 (LHZO) thin films. The resulting LHZO devices exhibit a resistive switching ratio of 8.4 × 10^4, two orders of magnitude higher than that of ZrO2 (1.2 × 10^3). Electrical characterization and synchrotron radiation photoemission spectroscopy reveal that Lu doping widens the bandgap to 4.95 eV, downshifts the valence band, and introduces defect states, collectively suppressing p-type conductivity and reducing off-state leakage current. Simultaneously, Lu3+ doping enriches oxygen vacancies, stabilizing ohmic conductive filaments in the on-state. This co-optimization of band structure and oxygen vacancies effectively enhances insulating properties in the high-resistance state and ohmic conductivity in the low-resistance state, leading to superior resistive switching performance with robust retention (>10^4 s). Our findings establish a fundamental strategy for tailoring electronic properties of doped HfZrO2 thin films toward high-performance RRAM applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4194-2
Lanthanide-doped upconversion nanoparticles (UCNPs) exhibit distinctive optical characteristics, including excellent photostability, large anti-Stokes shifts, narrow emission bands, and tunable luminescence lifetimes. Despite their advantages, UCNPs suffer from inherently weak light absorption because of the 4f-4f transitions of lanthanide ions. Near-infrared dye-sensitization has emerged as an effective strategy to enhance their absorption, yet the photoconversion performance remains constrained by photobleaching and interfacial energy losses. In this review, we systematically analyze the surface coordination environments and energy transfer pathways that govern dye-sensitized UCNPs. We evaluate critical molecular parameters, such as dye frameworks, surface binding affinity, and triplet-state energy alignment, in conjunction with nanoparticle structural features, including dopant concentration, core-shell architectures, and surface electronic configurations. By providing a fundamental assessment of these photophysical and photochemical processes, we propose targeted optimization strategies to enhance the performance and stability of these hybrid materials for advanced applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3607-9
Enhancing light olefin selectivity and extending catalytic durability remain critical challenges for ZSM-5 zeolites in methanol-to-olefins (MTO) conversion, primarily due to inherent diffusion restrictions along the MFI b-axis and poor coke accommodation. Here, we report a hierarchically single-crystalline ZSM-5 sheet architecture featuring interconnected multiscale porosity and a remarkably reduced b-axis thickness (<50 nm), quantitatively verified by three-dimensional electron tomography. Real-time confocal laser scanning microscopy tracking demonstrated significantly enhanced molecular diffusivity compared to conventional micron-sized ZSM-5 (Micro-ZSM-5). This engineered structure distributes abundant aluminum sites on highly accessible diffusion pathways, achieving an enlarged coke accommodation of 16.31 wt% with a coke deposition rate of 0.59 mg g−1 h−1, only one third of that in Micro-ZSM-5. In continuous MTO operation, the hierarchical ZSM-5 sheet (Hier-ZSM-5-S) maintained an average ethylene and propene selectivity of 63.5% for 22.2 hours (WHSV = 3.6 h−1, T = 480°C), which was 19% higher and 6.5 times longer than Micro-ZSM-5, respectively. This hierarchically shortened b-axis structure establishes a generalizable paradigm for enhanced diffusion and coke accommodation in precisely designed pore systems, applicable to various reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3660-5
High-sensitivity piezoelectric ceramics with high piezoelectric constants (d33) are crucial for miniaturized, low-power, and high-efficiency transducers. However, conventional performance enhancement relies on intrinsic parameter modulation, which is limited and blind. This study introduces a performance-driven metamaterials creation model to develop structure-function-integrated piezoelectric materials. We systematically investigated the effects of metastructure design on d33 across two-dimensional straight rod (SR) structures, three-dimensional dot-matrix (Octa) structures, complex triply periodic minimal surface (TPMS) structures, and hybrid Octa&SR structures. The results demonstrate that metastructures combining high polarization charge conversion efficiency with low compression modulus (stiffness) effectively enhance d33. The SR structure exhibited optimal polarization charge conversion, the Fks-Shellular (FksS) structure within TPMS showed low stiffness, and the Octa&SR structure combined both properties. Notably, all three structures displayed exceptional piezoelectric performance. Specifically, the FksS structure achieved a substantial d33 of 194 pC/N, a 24% enhancement over conventional solid BaTiO3, while maintaining isotropic and stress-insensitive properties. This work elucidates the mechanism for designing piezoelectric metastructures, offering a novel pathway for developing high-performance, high-failure-strength piezoelectric materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3625-3
Zirconia (ZrO2)-based fluorite ferroelectric materials are promising for nonvolatile memory and logic devices due to their CMOS compatibility and cost advantages over hafnium oxide (HfO2). However, the metastable nature of the ferroelectric orthorhombic phase (o-phase) hinders practical application. Here, we report the strain-mediated stabilization of the ferroelectric o-phase in ZrO2 thin films grown on niobium-doped strontium titanate (NSTO) substrates with different crystallographic orientations via chemical solution deposition. Systematic structural and ferroelectric characterization, combined with simulation, reveals that substrate orientation controls in-plane tensile strain, selectively promoting epitaxial growth of the o-phase. The ZrO2 film on NSTO(110) exhibits the highest o-phase content, achieving a remanent polarization (2Pr) of 92.64 μC/cm², which remains as high as 88.54 μC/cm² after resistive-capacitive (RC) delay calibration. The device shows endurance of approximately 10^7 cycles with favorable fatigue characteristics. X-ray absorption spectroscopy (XAS) further indicates distortion of Zr-O tetrahedra, providing microscopic insight into the ferroelectricity. This work presents a novel strategy for property tuning of ZrO2 films and supports their application in storage and logic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3699-1
Dual-atom (DA) catalysts have exhibited great potential in regulating the catalytic performance of CO2 reduction. However, precise construction of DAs on a support remains challenging. Herein, we report the precise immobilization of M-DAs (M = Ru, Rh, Pt) onto the Zr-oxo cluster of a 2D porphyrinic metal-organic framework (2D-Ni-PCN-222) via a dimetallic complex pre-coordination strategy. The resultant M-DAs/2D-Ni-PCN-222 catalysts were applied to CO2 photoreduction using ammonia borane as the H* donor. Under visible light, the optimal catalyst, Ru-DAs/2D-Ni-PCN-222, exhibited a HCOO− production rate of 35.4 mmol g−1 h−1 with nearly 100% selectivity and a turnover frequency of 691 h−1. Kinetic isotope experiments demonstrated that the coupling rate between H* and CO2 governed the production efficiency of HCOO−. In situ experiments and density functional theory calculations disclosed that Ru-DAs with highly delocalized d electrons could accept photogenerated electrons from 2D-Ni-PCN-222 and inject them into inert CO2 molecules. Ab initio molecular dynamics simulations revealed that adaptive shortening of Ru–O coordination bonds during CO2 adsorption played a crucial role in facilitating deeper activation and the formation of an optimal η3–O,C,O adsorption mode of CO2. This work provides a precise strategy for constructing dual-atom catalysts on MOFs and elucidates the mechanism of CO2 photoreduction, offering insights for the design of efficient photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3657-9
Perovskite/silicon tandem solar cells (TSCs) have achieved power conversion efficiencies (PCE) up to 34.9%, surpassing the Shockley-Queisser limit of single-junction devices. The interconnection layer (ICL) critically bridges top and bottom subcells, enabling charge carrier recombination. Conventional indium oxide (In2O3)-based TCOs suffer from high-energy ion bombardment during sputtering, damaging amorphous silicon subcells and reducing open-circuit voltage (VOC) and fill factor (FF). Additionally, indium scarcity and cost necessitate indium-free alternatives. Here, we introduce a highly degenerate indium-free samarium-doped cadmium oxide (CdO:Sm) TCO as the ICL for perovskite/SHJ TSCs, deposited via low-damage reactive plasma deposition (RPD). The ultrathin CdO:Sm film (~3 nm) exhibits average transmittance of 85% (400–1200 nm) and 90% (800–1200 nm), enabling efficient near-infrared absorption in the bottom subcell. High doping concentration and mobility ensure excellent electrical conductivity. The low work function (4.04 eV) of CdO:Sm facilitates carrier tunneling and efficient recombination. Devices employing CdO:Sm ICL achieved approximately 1% higher efficiency compared to those with indium-based TCO ICLs. Detailed characterization including contact resistivity (1.68 mΩ cm2), conductive atomic force microscopy, Kelvin probe force microscopy, and photoluminescence quenching confirm enhanced carrier transport and extraction. This work demonstrates a viable indium-free ICL for high-efficiency perovskite/SHJ TSCs, addressing both performance and sustainability challenges.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60607-4
The methanation of biomass gasification syngas (H2/CO = 3:1) was investigated over Ni/Al2O3 monolithic catalysts supported on cordierite, with a nominal Ni loading of 15 wt%. Catalysts were modified by treatment with 10% NaOH solution for 1 h and 2 h. Physicochemical properties were characterized by BET, TEM, H2-TPR, XRD, CO2-TPD, and TG. Results showed that the 2 h modification (15%Ni/Al2O3-2h) increased specific surface area, enhanced catalytic activity, and increased alkaline site density compared to the unmodified catalyst. Under optimized conditions (H2/CO volume ratio 3:1, space velocity 10000 mL/(g·h), temperature 400 °C), the 15%Ni/Al2O3-2h catalyst achieved a CO conversion of 97% and CH4 selectivity of 100%. Stability tests over 2 h showed that the CO conversion remained stable at approximately 98%, indicating excellent catalytic stability. The study demonstrates that alkali modification with 10% NaOH for 2 h significantly improves both the methanation performance and stability of Ni/Al2O3 monolithic catalysts, offering a promising route for synthetic natural gas production from biomass.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512072
Drainage pipeline defect detection predominantly relies on closed-circuit television (CCTV) inspection, which is labor-intensive, inefficient, and prone to missed detections. Although deep learning-based object detection has been applied, it suffers from low precision, recall, and speed in practical scenarios. This study proposes an engineering-oriented detection scheme achieving high recall and low miss rates. The annotation phase employs a cross-frame strategy combining manual labeling of first and last frames with interpolation and tracking-based refinement. Data preprocessing introduces perceptual hashing to identify similar images, enhancing training efficiency. For detection, a Faster R-CNN model is enhanced with Focal Loss to focus on hard examples, defect classification and grading, and a dynamic threshold strategy to improve recall. Validated on 5,068.72 m of real pipeline data, the method achieves a recall rate exceeding 98% across 16 defect categories, a miss rate of only 2% for grade 4 defects, and a 425% improvement in per-segment detection efficiency compared to manual screening. These results demonstrate the method's effectiveness in balancing recall, miss rate, and speed for engineering deployment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102403
The rapid combustion of soot at low temperatures is critical for diesel engine cold-start emission control. This study investigates the effects of water vapor (H2O) and nitrogen oxides (NOx) on electricity-pulse-sparked catalysis (EPSC) for soot combustion over a ceramic filter paper-based potassium-supported antimony-doped tin oxide (K/ATO/CP) monolithic catalyst. Under EPSC with 2000 J pulses, the presence of H2O and NOx adversely affected soot combustion performance, yet average reaction rates remained high at 12.0 μmol·gcat−1·s−1 and 9.53 μmol·gcat−1·s−1, respectively, exceeding conventional thermal catalysis (<8 μmol·gcat−1·s−1). In situ Raman and concentration profiles revealed that electricity pulses promote rapid H2O desorption, effectively alleviating H2O poisoning and restoring catalyst activity. In contrast, NOx adsorption forms stable nitrates (e.g., KNO3) that desorb slower than the soot combustion process, leading to incomplete recovery of activity. These findings highlight the importance of adsorbate desorption kinetics in EPSC and suggest that using weakly basic alkaline-earth metals (e.g., Mg, Ca, Sr) with lower nitrate decomposition temperatures could mitigate NOx poisoning. The results provide guidance for advancing EPSC technology in hybrid vehicle exhaust aftertreatment systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604007
Low C/N ratios in wastewater treatment plant effluent necessitate external carbon sources for denitrification, but conventional liquid carbon sources are costly and unstable. This study prepared nine composite solid-phase carbon sources by combining PHBV with natural cellulose materials (straw, sawdust, corncob) at different mass ratios. Dynamic release experiments, DOC analysis, UV-Vis spectroscopy, and EEM fluorescence were employed to characterize carbon release. Results showed that increasing cellulose proportion in corncob-based sources led to release patterns opposite to those of straw- and sawdust-based sources. For straw and sawdust, higher cellulose ratios accelerated release rates, increased total release and duration, reduced aromaticity and molecular weight of released DOM, and promoted protein-like components (tryptophan, tyrosine), indicating enhanced bioavailability. Under identical ratios, corncob-based sources exhibited moderate total release, release durations exceeding 134 h, lower DOM aromaticity and molecular weight, and lower humic substance proportion, indicating superior bioavailability and engineering potential. Among the nine sources, JG5, MX5, and CC4 (PHBV:cellulose mass ratios of 4:5, 4:5, and 1:1, respectively) showed optimal comprehensive performance with low theoretical maximum release, long release periods, and high mass transfer coefficients. EEM-PARAFAC identified three DOM components (protein-like C1, C2; humic-like C3), with protein-like components dominating. This study validates the relationship between cellulose proportion and release kinetics and reveals synergistic regulation of DOM components, offering guidance for designing effective solid-phase carbon sources.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604022
The resource utilization of food waste contributes to reducing environmental pollution, driving nutrient cycling and biomass energy development, and promoting the resource recycling industry, achieving a win-win outcome for environment and economy. This study evaluated the resource recovery performance and environmental impacts of producing carbon sources for wastewater treatment through hydrolysis and acidification of food waste, comparing with two conventional alternatives: anaerobic fermentation and incineration. Results showed that among the three technologies, hydrolysis for carbon source production ranked middle in resource recycling efficiency, but its environmental benefits were superior to incineration and anaerobic fermentation. The hydrolysis process did not produce additional wastewater requiring treatment, and its greenhouse gas emissions and solid waste generation intensity were relatively low, at -40.7 kg CO2-eq/t and 9.3%, respectively. Carbon sources derived from food waste can replace commercial alternatives, reducing wastewater treatment costs and promoting synergies between pollution reduction and carbon mitigation. Sensitivity analysis revealed that water content in food waste significantly influences solid impurity generation and energy recovery efficiency of hydrolysis technology. In regions with high food waste generation and carbon source demand, hydrolysis technology is recommended to facilitate large-scale synergistic treatment of wastewater and food waste.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605002
The single-phase partial nitrification and anammox (SPN/A) process has seen limited widespread application due to its slow startup and difficulties in enriching anaerobic ammonium-oxidizing bacteria (AnAOB). This study utilized high-ammonia nitrogen wastewater to initiate and enhance the SPN/A process in a pilot-scale integrated fixed-film activated sludge (IFAS) reactor. By establishing an IFAS-SPN/A coupled system based on the symbiotic relationship between biofilm and sludge, rapid startup and efficient AnAOB enrichment were achieved. An innovative sludge inoculation strategy was employed: first, conventional nitrifying sludge was inoculated to initiate shortcut nitrification and allow ammonia-oxidizing bacteria (AOB) to colonize blank carriers; subsequently, anammox sludge was inoculated to promote efficient AnAOB enrichment on the AOB biofilm. The influent was low-temperature shift condensation water from a synthetic ammonia workshop, with an average ammonium nitrogen concentration of 2300 mg/L and COD ranging from 50 to 200 mg/L. The 180-day experiment comprised three stages: shortcut nitrification startup, SPN/A startup, and load intensification. The system successfully started up SPN/A within 120 days, achieving total nitrogen removal efficiency and removal load of (90.21±2.18)% and (0.31±0.07) kg/(m³·d), respectively, through synergistic biofilm and suspended microorganisms. During load intensification, AnAOB relative abundances in biofilm and flocs reached 18.8% and 35.3%, respectively, and removal load increased to (0.64±0.11) kg/(m³·d). Stable influent quality is a prerequisite for efficient and stable nitrogen removal; a surge in influent ammonium concentration caused nitrite accumulation imbalance and deteriorated performance. Adding an equalization tank before the aeration tank mitigates water quality fluctuations, and a 'dilution-reconstruction' strategy for low-ammonia wastewater facilitates rapid recovery after performance deterioration.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605013
The escalating eutrophication of aquatic systems has intensified algal blooms, leading to substantial release and accumulation of algal-derived dissolved organic matter (ADOM), which profoundly influences carbon cycling and pollutant transport. Iron minerals, particularly ferrihydrite, are recognized as critical mediators of DOM sequestration, yet the adsorption fractionation of ADOM under varying environmental conditions remains poorly understood. This study systematically investigated the effects of pH (2.0–10.0) and initial dissolved organic carbon (DOC) concentration (2–100 mg C/L) on the adsorption capacity and selectivity of ADOM onto ferrihydrite, employing UV-Vis spectroscopy and excitation-emission matrix fluorescence with parallel factor analysis (EEM-PARAFAC). Results demonstrated that adsorption capacity increased with pH from 2.0 to 7.0, reaching a maximum of 21.59 mg C/g at pH 7.0, followed by a decline at pH > 7.0 due to enhanced electrostatic repulsion. Within the environmentally relevant pH range of 3.0–9.0, selective fractionation intensified with increasing pH, favoring highly aromatic, high-molecular-weight chromophoric DOM (CDOM) and protein-like/aromatic amino acid fluorescent DOM (FDOM) with high humification and autochthonous characteristics. With increasing initial DOC concentration, adsorption exhibited non-linear growth, with preferential uptake of low-aromaticity, high-molecular-weight CDOM and protein-like FDOM of lower humification and stronger autochthonous features. These findings elucidate that ferrihydrite can effectively sequester reactive ADOM components via pH- and concentration-dependent selective adsorption, potentially altering DOM composition and reactivity in eutrophic waters, thereby providing fundamental data for understanding iron mineral-mediated internal carbon sequestration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3973-9
Circularly polarized luminescence (CPL) is a phenomenon where chiral molecules emit light with distinct left or right circular polarizations upon excitation. Unlike conventional luminescent materials, chiral materials produce light with inherent helicity, leading to unique applications in chiral optoelectronics, quantum technologies, and biophotonics. This review systematically explores the theoretical and computational foundations of CPL, focusing on the interplay between molecular chirality, transition dipole moments, and photoluminescence quantum yield. A major challenge in designing efficient CPL-active materials is optimizing the luminescence dissymmetry factor (g_lum) while maintaining high photoluminescence efficiency. This review comprehensively summarizes how first-principles computational methods, by establishing robust predictive frameworks, have significantly advanced the design of CPL molecules. Even though significant progress has been made in modeling monomeric systems, the effective integration of first-principles calculations to describe CPL in aggregated states remains an ongoing challenge. The review also highlights the promising synergy between computational models, experimental validation, and emerging data-driven techniques such as machine learning (ML) for guiding the design of novel high-performance CPL materials. In conclusion, further research is needed to overcome current computational limitations and develop more effective strategies for CPL material design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3827-3
Chiral functional materials, characterized by intrinsic spatial asymmetry, hold transformative potential in photonics, enantioselective synthesis, quantum technologies, and biomedicine. However, their rational design and discovery are impeded by the vast chemical space and complex structure-property relationships, rendering traditional trial-and-error approaches inefficient and costly. This review critically examines the paradigm-shifting role of artificial intelligence (AI) in accelerating the discovery and optimization of chiral functional materials. We highlight recent AI-driven breakthroughs, emphasizing machine learning (ML) algorithms that excel in identifying patterns within high-dimensional data, thereby enabling rapid virtual screening and elucidation of intricate structure-property correlations. Key applications span from predicting enantioselectivity in asymmetric catalysis to designing circularly polarized luminescent materials and chiral metamaterials. Notably, ML models have achieved predictive accuracies exceeding 90% in classifying chiral structures and have reduced computational screening times by orders of magnitude. The integration of AI with automated synthesis platforms further enables closed-loop optimization, as demonstrated in the autonomous discovery of optically active chiral perovskite nanocrystals. This review underscores that AI not only accelerates materials discovery but also fosters cross-disciplinary innovation, positioning itself as an indispensable tool for the next generation of chiral functional materials. By synthesizing recent progress, we provide a roadmap for leveraging AI to navigate the complex landscape of chiral materials, ultimately expediting the translation of laboratory innovations into practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3877-7
Circularly polarized (CP) photodetectors are pivotal for optical communication, polarization imaging, and target recognition. Chiral organic materials offer structural tunability, solution processability, and compatibility with flexible substrates, yet their development is hindered by synthetic challenges, enantiomeric separation difficulties, and intrinsically weak chiroptical responses. Recent advances in molecular design and solid-state assembly have markedly enhanced device performance. This review summarizes developments in chiral organic materials for CP photodetection, focusing on molecular design and supramolecular engineering. It highlights strategies such as chiral non-fullerene acceptors, cooperative supramolecular polymerization, and chiral 2D supramolecular organization in single crystals, which amplify dissymmetry factors and enable high-performance detection across UV to near-infrared regions. Potential applications in spin-encoded communication, biological sensing, and quantum computing are discussed. The review aims to deepen understanding and foster interdisciplinary research in this emerging field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3801-1
Traditional phase transition gel platforms face significant challenges in achieving time-gated information encryption and decryption. Here, we report a photocleavable gel that enables time-gated information encryption and decryption, enhancing information storage security. The gel is synthesized by copolymerization of hydrophobic ortho-nitrobenzyl acrylate (NA) and acrylamide. Upon ultraviolet (UV) irradiation, hydrophobic NA units partially cleave to yield orange-colored o-nitrosobenzaldehyde (NSBA) molecules and hydrophilic acrylic acid groups, altering local color and hydrophilicity. Information is spatially encoded using a photomask. The written information is encrypted by dissolving NSBA molecules in dimethyl sulfoxide (DMSO). Upon aqueous immersion, differential hydrophilicity between irradiated and non-irradiated zones triggers localized phase separation, facilitating decryption. Notably, photolysis kinetics is time-gated, ensuring decryption only within a specific time window in water. This method surpasses traditional gel constraints, offering a novel paradigm for secure information storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3876-5
Electromagnetic interference (EMI) shielding technology is evolving from traditional bulky metal enclosures toward ultrathin, conformable, and flexible films. However, as the thickness of the shielding layer decreases, the electromagnetic wave absorption efficiency significantly deteriorates, leading to a marked decline in overall shielding performance. To overcome this intrinsic 'thickness–performance dilemma', porous structural designs are often employed to enhance multiple internal reflections and absorption. Nevertheless, such strategies typically suffer from uncontrollable thickness, poor spatial uniformity, and low process compatibility. To address these challenges, a joint team from the Gwangju Institute of Science and Technology and Seoul National University proposed an embedded MXene-in-metal (EXIM) shielding strategy. By embedding a non-porous MXene layer within a metallic film, a metal–MXene–metal heterolamellar architecture was constructed. Remarkably, this ultrathin structure achieves an EMI shielding effectiveness of ~70 dB at only ~1 μm thickness (up to 80 dB at 1.9 μm), breaking the conventional trade-off between reduced thickness and performance degradation. The superior performance originates from the conductivity contrast between the metal and MXene layers, which forms electromagnetic confinement wells. The localized electromagnetic waves undergo multiple polarization losses induced by interfacial dipoles, resulting in efficient energy absorption at thin thicknesses. The study further reveals that the EMI shielding performance of EXIM films primarily depends on the number of metal–MXene heterointerfaces rather than the total thickness. Multilayer stacking (e.g., Cu/Ti3C2Tx/Cu) notably enhances absorption efficiency while imparting excellent isotropy and flexibility. Moreover, introducing a Cr–Al dual-metal passivation layer effectively suppresses MXene oxidation, ensuring long-term operational reliability. The EXIM films are compatible with conventional fabrication and packaging techniques, including physical vapor deposition and spray coating, enabling scalable and large-area production. Practical demonstrations in USB 3.0 chips and flexible Schottky diodes confirm their outstanding capability in mitigating Bluetooth interference and blocking electromagnetic noise. This work is pioneering in that it introduces a new shielding mechanism based on conductivity contrast-induced electromagnetic confinement, achieves ultrahigh shielding effectiveness and mechanical flexibility within an ultrathin (<2 μm) structure, and elucidates a dipole-dominated interfacial polarization loss mechanism that provides theoretical insights into the design of 2D-material-based heterostructured shielding systems. Moreover, it opens up a new path for EMI shielding to shift from 'thick structure reflection' to 'heterogeneous interface confined absorption', providing a novel solution for realizing free-form, interference-free intelligent electronic packaging.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025092801
Urban river water quality is critically influenced by outfall discharges, yet the seasonal dynamics of dissolved organic matter (DOM) and its linkage to water quality remain poorly constrained. This study collected outfall water samples seasonally during 2023–2024 along the Nanfei River and Banqiao River in Hefei, Anhui Province. Parallel factor analysis of excitation-emission matrices identified three fluorescent components: fulvic acid-like C1, tryptophan-like (protein-like) C2, and terrestrial humic-like C3. Seasonal variations were pronounced: protein-like C2 dominated in winter and spring, whereas summer and autumn showed lower C2 proportions due to rainwater dilution and urban nonpoint source runoff inputs. Water quality indices decreased in summer and autumn, primarily attributed to dilution by rainfall runoff. Fluorescence index (FI > 1.9) and biological index (BIX > 1.0) indicated predominantly autochthonous DOM sources. During summer and autumn, humification index (HIX) and specific UV absorbance (SUVA) increased, while spectral slope ratio (SR) decreased, suggesting enhanced terrestrial and urban runoff influence. Significant positive correlations were observed between protein-like C2 and terrestrial humic-like C3 with water quality parameters, indicating their utility as precise indicators of pollution sources and seasonal water quality variations. These findings provide a scientific basis for integrated management of urban outfalls.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606011
Hexavalent chromium (Cr(VI)) contamination in chromite ore processing residue (COPR) and associated soils poses a persistent environmental challenge. This study developed a dispersedly stabilized iron-sulfur-based slurry (DSS-ISB) modified with an inorganic dispersant to enhance nanoparticle suspension stability and interfacial reactivity. The slurry, with a particle size of approximately 200 nm, efficiently reduced and immobilized Cr(VI) without pH adjustment. Under optimal conditions (liquid-to-solid ratio of 5 mL:10 g, DSS-ISB dosage of 1.8 mg/g, reaction time of 20 h), the removal efficiency exceeded 97%, reducing the leaching concentration from 15.03 mg/L to 0.03 mg/L, well below the GB 5085.3—2007 limit of 5 mg/L. X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analyses revealed a synergistic mechanism of chemical reduction (Fe2+/S2- as dual electron donors) and surface adsorption, converting toxic Cr(VI) to stable Cr(III). Compared with traditional reductants ferrous sulfate (FeSO4) and sodium sulfide (Na2S), DSS-ISB increased removal efficiency by 28.24% and 6.23%, respectively, and unit mass removal capacity by 92.43% and 77.08%. The reagent cost per ton of COPR was reduced to RMB 36.40, achieving savings of 33.82% and 26.02% versus FeSO4 (RMB 55.00) and Na2S (RMB 49.20). The process eliminates pH adjustment and subsequent passivation, simplifying remediation. DSS-ISB offers an economical and green solution for Cr(VI) remediation in both industrial residues and contaminated soils.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3963-5
Metal additive manufacturing (MAM) enables integrated one-piece fabrication of parts, high material utilization efficiency, and unparalleled design freedom. However, problems such as low production efficiency, difficulties in ensuring quality stability and defect control limit the large-scale industrial application of AM. In-situ active modulation for AM enables dynamic regulation of parts during the fabrication process, thereby enhancing the quality of the final fabricated parts without introducing extra processing steps. In-situ active regulation enables direct intervention during defect nucleation, providing better effectiveness than post-printing repairs while avoiding performance degradation risks associated with post-processing. Based on the difference of core factors directly affected during regulation, in-situ active regulation is categorized into the following. (1) Process and path parameter optimization, where regulation directly impacts manufacturing-related procedural rules. It is the simplest method of control and the preferred approach, with widespread attention focused on its effects on microstructure and mechanical properties. (2) Laser beam shaping, where regulation directly influences the energy carrier morphology. To address issues such as edge over-melting and localized energy deficiency caused by non-uniform energy distribution, laser beam shaping should be employed. (3) Additional physical field modulation achieved by superimposing supplementary physical fields. When optimal process and path parameters still fail to obtain the desired microstructure and mechanical properties, additional physical field control may be considered. Meanwhile, this work summarized the effects of different additional physical fields on the mechanical properties of various metallic base materials. The future trends of in-situ modulation in additive manufacturing are also discussed.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606018
Swine wastewater, a high-strength organic effluent, offers a viable substrate for anaerobic biohydrogen production, aligning with clean energy recovery. This study compared hydrogen production in three anaerobic sequencing batch reactors (ASBRs) treating: raw wastewater (R1), supernatant after MAP (magnesium ammonium phosphate) precipitation for nitrogen and phosphorus recovery (R2), and the same supernatant with anaerobic sludge heat-treated at 75°C for 0.5 h (R3). Without pH adjustment, hydrogen production in R1 remained below 0.50 mmol/(kg·d). At an influent COD of 1800 mg/L, R2 and R3 achieved hydrogen production rates of 48.17 and 71.44 mmol/(kg·d), respectively. At COD 2400 mg/L, methane concentrations in R1, R2, and R3 were 10.8%, 14.2%, and 9.1%, respectively, indicating MAP pretreatment enhanced both hydrogen and methane production. As COD increased, R1's methane concentration rose to 14.6%, while average COD removal efficiencies for R1, R2, and R3 were 78.9%, 70.8%, and 52.5%, respectively. Under pH adjustment, all reactors peaked at pH 4.0, with hydrogen production rates of 0.10, 7.74, and 8.83 mol/(kg·d) for R1, R2, and R3, respectively. These findings demonstrate that MAP pretreatment combined with sludge heat treatment significantly enhances biohydrogen production, offering a promising strategy for swine wastewater valorization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3893-y
Perovskite photolithography, an emerging research frontier, combines the unique properties of perovskite materials with lithographic processes for advanced optoelectronic applications. Currently, bottom-up photolithography is preferred due to perovskites’ intrinsic characteristics, while top-down photolithography offers better compatibility with mature semiconductor manufacturing workflows. In this study, we innovatively propose an integrated technology that merges top-down photolithography with in situ phase-transition strategy. Utilizing non-emissive Cs4PbBr6 perovskite single crystals (SCs) as both structural templates and reaction sources, we achieve spatially selective patterning by precise wet and dry etching, followed by inductively coupled plasma (ICP)-induced Cs4PbBr6 to CsPbBr3 phase transition. This process facilitates the direct fabrication of highly emissive CsPbBr3/Cs4PbBr6 microstructure patterns inside Cs4PbBr6 SCs. Such a synergistic approach simplifies perovskite photolithography procedures and enables rapid, large-scale manufacturability. Furthermore, its integration with machine learning optimization algorithms showcases promising application potential in intelligent anti-counterfeiting. This novel approach, integrating perovskite SCs homologous substrate with customized photolithography, provides a new strategy for fabricating high-performance perovskite optoelectronic devices and is expected to promote technological advancement.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202505106
Open-pit coal mining causes severe soil nutrient depletion, limiting vegetation restoration. This study, conducted in the Baiyinhua No.2 mining area (Inner Mongolia), evaluated the effects of different fertilization strategies on soil nitrogen (N) and phosphorus (P) availability and microbial community responses. A field experiment was established in May 2023 with five treatments: low (L), medium (M), and high (H) phosphorus inorganic fertilizers, green manure (GM), and a microbial fertilizer (MF) containing nitrogen-fixing and rhizobia bacteria, compared to a control (CK). Results showed that MF significantly increased total carbon (TC) from 8.47 to 10.17 g·kg⁻¹ and total nitrogen (TN) from 0.37 to 0.56 g·kg⁻¹, while H significantly increased available phosphorus (AP) from 9.78 to 26.28 mg·kg⁻¹. Both treatments significantly altered fungal community structure, with increased relative abundances of Gibberella and Alternaria. The study concludes that MF and H improve soil nutrient availability by modulating fungal communities, with MF offering a sustainable biological approach for mine reclamation. These findings provide targeted fertilization strategies for restoring degraded mining soils and advancing green mining practices.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202505108
Open-pit mining in high-cold regions causes severe ecological degradation, including vegetation loss, soil structure destruction, and frequent freeze-thaw disturbances, complicating ecosystem recovery. This review systematically synthesizes the current status, theories, and key restoration technologies for degraded ecosystems in high-cold mining areas. Comparative analysis with typical high-cold degraded ecosystems worldwide reveals that high-cold mining areas face challenges such as frequent freeze-thaw cycles, hydrological disruption, wind erosion, and difficult vegetation establishment. We propose strengthening aboveground-belowground synergistic restoration: (1) aboveground restoration should focus on screening cold-resistant native plants and optimizing mixed community configurations, combined with plant growth-promoting multi-microbial consortia to facilitate vegetation recovery; (2) belowground restoration should be based on engineering soil profile reconstruction, integrating physical-chemical-biological multi-dimensional remediation techniques to achieve aboveground and belowground community reconstruction and functional recovery; (3) a progressive restoration framework is established, with short-term goals targeting soil stabilization and structure improvement, medium-term goals focusing on constructing multifunctional plant-soil communities, and long-term goals achieving self-sustaining, maintenance-free restored ecosystems. Finally, addressing the unclear mechanisms of aboveground-belowground synergistic interactions and insufficient environmental adaptability of restoration technologies, two prospects are proposed: (1) deepening research on aboveground-belowground synergistic mechanisms to reveal interactions between cold-tolerant microorganisms and plants; (2) advancing the development of characteristic restoration technologies adapted to high-cold environments.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202503016
Open-pit coal mining severely damages soil and plant community structure and function, causing soil nutrient loss and ecological degradation. Vegetation reconstruction is a key measure for restoring degraded mining ecosystems, with the core challenge being the selection of suitable plant species and optimization of plant configurations. This study focused on the degraded ecosystem of the Baiyinhua open-pit mine in Inner Mongolia, screening native plant species for vegetation reconstruction experiments to investigate early-stage changes in soil nutrient availability and the underlying microbial mechanisms. Results showed that soil physicochemical properties and fungal community diversity exhibited strong adaptability during early reconstruction. However, soil fungal community composition and the relative abundance of saprotrophic fungi differed significantly among plant configurations. Leymus chinensis significantly increased the proportion of soil saprotrophic fungi from 67.28% in the control to 81.63%, while reducing the relative proportion of pathogenic fungi from 15.63% to 4.33%, demonstrating its potential to enhance soil health. Medicago rivularis improved soil microbial community composition and increased soil available phosphorus content, highlighting its capacity as an excellent pioneer species for optimizing soil nutrient availability. Furthermore, mixed sowing of grasses and legumes showed potential to enhance the nitrogen-fixing effect of legumes. Given the significant positive correlation between soil fungal community composition and total nitrogen and available nitrogen, the effects of different plant configurations on soil nutrient availability and biological health likely stem largely from the regulation of soil fungal community composition. In conclusion, achieving the goal of selecting optimal plant configurations still requires long-term continuous observation and analysis, particularly for optimizing configurations between high-quality grasses like Leymus chinensis and legumes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040401
Conventional zero-valent iron (ZVI) suffers from limited electron transfer due to its dense surface oxide layer. This study introduces a mechanochemical ball-milling strategy incorporating sodium chloride (NaCl) with ZVI to fabricate chloride-modified ZVI (Cl-ZVIbm). Using hexavalent chromium (Cr(VI)) as a model pollutant, Cl-ZVIbm exhibited a 76.5-fold enhancement in removal kinetics (0.0306 min−1 vs. 0.0004 min−1) compared to ball-milled ZVI (ZVIbm), achieving complete removal of 2 mg·L−1 Cr(VI) within 120 min. Spectroscopic characterization and density functional theory (DFT) calculations revealed dual regulation mechanisms: (1) Cl− substitution of surface hydroxyl groups alters coordination environments, enabling Cr(VI) adsorption via a bidentate binuclear configuration with adsorption energy reduced from –0.28 eV to –1.64 eV; (2) The strong electron-withdrawing effect of Cl− drives directional electron migration from the iron core to the surface, increasing surface Fe(II) content by 26.9% (67.5% vs. 53.2%) and facilitating direct electron transfer to reduce 99.5% of Cr(VI) into low-toxicity Cr(III). Notably, chloride leaching during reactions was only 0.0126 mmol·L−1, far below industrial wastewater discharge standards, confirming environmental compatibility. This work provides atomic-scale insights into chloride-mediated electronic modulation on ZVI surfaces, offering novel principles for interfacial engineering of environmental functional materials and a theoretical basis for heavy metal remediation technologies.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040104
The oxidative transformation of 2,6-dichlorophenol (2,6-DCP) was investigated in three typical zonal soils: black soil, red soil, and brown soil. Results demonstrated that 2,6-DCP underwent oxidative coupling in all soils, yielding hydroxylated polychlorinated diphenyl ethers (OH-PCDEs) and hydroxylated polychlorinated biphenyls (OH-PCBs) as primary products. The highest oxidative efficiency occurred in black soil, with approximately 85.1% of 2,6-DCP transformed within three days. In contrast, red and brown soils exhibited lower efficiencies, indicating a strong dependence on soil properties. Thermodynamic analysis revealed that the oxidative coupling reaction is endothermic, with elevated temperatures favoring reaction progress. Furthermore, soil microorganisms and dissolved oxygen were identified as critical controlling factors, acting synergistically to drive the reaction. This study provides the first evidence of natural oxidative coupling of 2,6-DCP in soil, forming OH-PCDEs and OH-PCBs. These findings offer significant scientific insight into the environmental fate of halogenated phenolic pollutants in terrestrial systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607004
Pelletizing technology is widely applied in biomass and coal fuel processing, offering advantages in transport, storage, and energy density. Coal gasification fine slag (CGFS), a carbon-rich coal-based solid waste, holds potential as a fuel. This study prepared centimeter-scale composite pellets by blending CGFS with various biomass types under 6 MPa at room temperature for 2 minutes. Combustion and emission characteristics were investigated using a self-developed flat-flame macro-thermogravimetric reactor simulating high heating rate conditions. Results showed that biomass type significantly influenced combustion due to chemical composition differences. Introducing biomass altered fuel particle composition, enhancing combustion rates of single-component fuels by 3–5 times during volatile combustion. Co-combustion reduced NOx and CO emissions by over 50% compared to pure CGFS. Higher biomass ratios accelerated volatile release and shortened burnout time but increased NO emissions due to higher volatile nitrogen content. Conversely, CO emissions decreased due to improved char combustion conditions. These findings provide critical experimental support for optimizing clean and efficient solid fuel production from CGFS and biomass.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607009
Resource utilization of food waste is a key measure for implementing waste classification and constructing zero-waste cities in China. However, the technical route based on anaerobic digestion currently faces developmental bottlenecks. In this study, engineering-scale facilities located in Northeast, North, Northwest, and Southeast China were selected, and material flow analysis was employed to comprehensively assess the current status of anaerobic digestion of food waste. The results indicated that, during the pretreatment stage, both leachate and organic slurry from all surveyed regions exhibited high COD/TN ratios, and the leachate contained high concentrations of lipids. Following three-phase (oil-water-solid) separation, the oil recovery rate could reach over 98%. Anaerobic digestion of each ton of food waste from the four regions generated approximately 70 to 80 Nm³ of biogas, while simultaneously producing liquid digestate accounting for 69% to 80% of the total mass and solid digestate accounting for 2.7% to 3.6%. However, the annual continuous production of digestate was not aligned with the seasonal demand for land use, thereby restricting the pathway for resource utilization. Converting food waste into an external carbon source can significantly enhance its resource utilization efficiency, with the economic benefits increasing by more than 203% compared to the methanogenesis pathway. The selection of the carbon source production technology route should be comprehensively determined by taking into account factors such as the specific nitrogen removal requirements of the target wastewater treatment process, the quality requirements for the carbon source products, and the substitution rate of commercial carbon sources.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607020
Kitchen waste (KW) and excess sludge (ES) are urban biowastes with resource recovery potential, commonly treated via anaerobic digestion (AD) for methane production. However, KW mono-digestion suffers from acidification, while ES yields low methane. This study employed semi-continuous reactors to simulate practical AD, co-digesting KW and ES at a 4:1 volatile solids ratio with biochar addition (0.5, 1.0, 2.5, 5.0, 10.0 g/L). The optimal biochar dosage was 2.5 g/L, achieving cumulative biogas and methane volumes of 17.53 L and 11.63 L, respectively, representing 42.10% and 39.47% increases over the biochar-free control, and 34.45% and 43.30% enhancements relative to thermally hydrolyzed sludge. The methanogenic lag phase decreased from (5.65±0.11) d to (4.33±0.12) d. Process stability improved, with average volatile fatty acids (VFAs) during stable operation dropping from 1708 mg/L to 1033 mg/L. Microbial analysis revealed enhanced diversity and enrichment of Synergistetes and Syntrophomonas, indicating direct interspecies electron transfer (DIET) promotion. Biochar at low concentrations enhances AD by immobilizing microbes and facilitating electron transfer, while high concentrations (10 g/L) may inhibit methanogenesis due to fatty acid degradation blockage, yet total methane production remained above control. These findings demonstrate that biochar addition at 2.5 g/L effectively enhances methane production and process stability in KW-ES co-digestion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3965-5
Liquid crystal elastomers (LCEs) have emerged as a promising material platform for soft robotics, effectively integrating programmable molecular orientation with the inherent flexibility of elastomers. This unique combination enables significant, reversible deformations responding to external stimuli, including heat, light, electric, and magnetic fields. Due to these characteristics, LCEs serve as an ideal material system for bridging biological principles with engineered soft robotic applications, enabling the development of adaptive and multifunctional systems with enhanced biomimetic capabilities. However, the mechanisms of bioinspired motion and the effective integration of biomimetic functions in LCE-based robots remain insufficiently explored. This review systematically examines recent advances in LCE-based biomimetic soft robots, focusing on multimodal actuation strategies, including contraction, crawling, rolling, jumping, swimming, and plant-inspired motions. It highlights integrated functional enhancements achieved via innovative material compositions, structural designs, and advanced manufacturing techniques. These developments have enabled novel robotic functionalities, including programmable actuation, self-healing and recycling, color morphing and camouflage, and tunable bioinspired surface characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3895-7
Flexible transparent electrodes are vital for next-generation electronics, but conventional silver nanowire (AgNW) networks suffer from non-uniform current and “hot spots” due to their random arrangement. To address this, we present a facile rubber pressure treatment that enables the controlled self-assembly of ordered AgNW micromesh (Ag NMs) on hydrophilic surfaces. This simple physical treatment simultaneously modifies surface energy and topography through molecular chain transfer from the rubber, creating optimal wetting conditions for coffee-ring assembly. This dual modification transforms droplet evaporation from constant contact angle to constant contact radius mode, enabling the universal fabrication of well-defined Ag NMs on diverse substrates like glass, polymers, and even curved surfaces. The resulting Ag NMs/colorless polyimide (CPI) electrodes (2 cm × 2 cm, ~30 Ω/sq), fabricated via single-step transfer and embedding, demonstrate desirable uniform sheet resistance distribution (<5% variation), outstanding mechanical durability, and environmental stability. These electrodes exhibit superior performance in practical applications, including stable electrical heating (159 ± 3°C at 8 V) with uniform temperature distribution and excellent electromagnetic interference (EMI) shielding (26.4 dB), while maintaining high optical transparency (~78%). This scalable approach offers a promising platform for advanced flexible electronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510042
Given China's escalating municipal solid waste (MSW) generation and the limitations of current classification schemes, this study proposes a novel waste classification model centered on mid-end intelligent sorting technology. The approach integrates targeted pretreatment with multimodal visual recognition and robotic grasping to efficiently sort complex household waste, while compact equipment innovations adapt to the low-value characteristics of recyclables. An engineering demonstration case shows that the technology can effectively recover low-value recyclables comprising 15%–30% of mixed MSW. If applied at 5% of a case city's waste transfer stations, approximately 5×10^4 t of recyclables could be sorted annually. Preliminary estimates indicate a 20% return on investment for operators at an 80 t·d−1 scale. The study demonstrates that mid-end intelligent sorting offers a technically feasible and economically sustainable solution to reduce fiscal expenditure on waste classification while improving efficiency.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512014
Mining activities cause severe soil degradation and microbial diversity loss, impeding ecological restoration. This study evaluated the effects of a novel soil amendment, microporous bio-gravel (MBG), on bacterial and fungal community structure and function in degraded soil from the Baiyinhua open-pit mine, Inner Mongolia. A pot experiment with four MBG-to-soil volume ratios (CK, L=1:3, M=1:2, H=1:1) was conducted, with a simplified plant community and uniform fertilization. After 180 days, soil samples were analyzed via high-throughput sequencing and bioinformatics. Results showed that the medium ratio (M) significantly increased fungal Shannon index and evenness, while the high ratio (H) negatively affected bacterial communities. At phylum and genus levels, MBG promoted enrichment of Cyanobacteria and specific functional groups (e.g., nitrogen-fixing bacteria, Bacillus). Co-occurrence network analysis revealed peak complexity, modularity, and average degree in bacterial and fungal networks under the M treatment. Functional prediction indicated significant enrichment of pathways related to lipopolysaccharide biosynthesis, nitrotoluene degradation, and plant-pathogen interactions, alongside increased abundance of saprotrophic and ectomycorrhizal fungi. Mantel and VPA analyses showed that MBG indirectly regulated microbial community structure by improving soil physicochemical properties and plant traits, with stronger effects on fungi than bacteria. In conclusion, MBG optimizes the soil microhabitat and plant-soil-microbe interactions, modulating microbial diversity, network complexity, and functional potential. The medium ratio (1:2) was most effective, demonstrating potential for ecological restoration of degraded mine soils.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041804
Ethylene diamine tetra (methylene phosphonic acid) sodium (EDTMPS), an organic phosphonate scale and corrosion inhibitor, is widely used in industrial recirculating cooling water systems. Its efficient degradation in blowdown water is critical for water reuse. This study employed a plate-frame electrochemical advanced oxidation (EAOP) system with a boron-doped diamond (BDD) anode to degrade EDTMPS. The effects of operating conditions (temperature, voltage, liquid flow rate) and water quality parameters (pH, electrolyte concentration, chloride ion concentration) were systematically investigated. Optimal degradation efficiency of 99.48% was achieved at 50 °C, 300 mL·min−1, 7.0 V, pH 10, and 0.05 mol·L−1 Na2SO4. Electron paramagnetic resonance (EPR) characterization of chloride-containing systems indicated that reactive species included hydroxyl radicals, sulfate radicals, and possibly chlorine radicals. In a coexisting system with benzotriazole (BTA), EAOPs degraded EDTMPS and BTA with comparable efficiencies. The results demonstrate that BDD-based EAOPs is effective for removing organic phosphonates from low-chloride, low-hardness cooling water, offering a promising approach for blowdown water treatment and reuse.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041505
To combat severe air pollution, China has implemented a series of air pollution control action plans since 2013, effectively alleviating PM2.5 pollution. However, PM2.5 concentrations in most cities within the Fenwei Plain still exceed national standards. This study systematically evaluates PM2.5 concentration changes across two policy phases (2013–2020) using the Community Multiscale Air Quality (CMAQ) model, quantifying contributions of meteorology and emissions, and analyzing sectoral source changes. Results show that annual average PM2.5 concentration declined cumulatively by 19% during 2013–2020. In the first phase (2013–2017), regional PM2.5 decreased by 3% annually, with most improvement in winter; however, due to unfavorable meteorology, concentrations increased in Xi'an and Xianyang. In the second phase (2017–2020), PM2.5 declined by an additional 16%, with more effective control measures, particularly in spring and autumn. Emission reductions dominated in both phases, with stronger effects in the second phase (−8 μg·m−3), significantly outweighing adverse meteorological contributions (+3.5 μg·m−3). Nevertheless, many cities still face challenges from unfavorable meteorology, highlighting the need for future policies to account for meteorological influences. Emissions from industrial, energy, and agricultural sources decreased significantly across both phases. However, during winter heating periods, residential emissions emerged as a source equal in importance to industrial emissions, becoming a key target for future emission controls.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4035-5
Electrocatalytic CO2 reduction reaction (CO2RR) to formate offers a promising pathway for storing renewable electricity in chemical fuels and enabling carbon recycling. The development of efficient and stable catalysts for this specific pathway, however, remains a central challenge. Heteroatom doping can significantly tune the interaction between active sites and key intermediates, boosting catalytic performance. Conventional doping in Bi-based catalysts often relies on uncontrollable in-situ electrochemical processes, leading to ineffective bulk incorporation. Here, we present a simple pre-doping strategy that enables precise doping at surface active sites, thereby enhancing electrochemical performance. The resulting catalyst achieves >95% Faradaic efficiency for formate across 100–500 mA cm−2 in a flow cell and maintains >95% efficiency for over 70 h at 100 mA cm−2 in a membrane electrode assembly, outperforming pure Bi and Bi2S3. A solar-driven system further demonstrates a 4.4% solar-to-formate conversion efficiency. Mechanistic studies reveal that sulfur doping increases electron density, stabilizes the key *OCHO intermediate, and suppresses hydrogen evolution. These findings provide valuable insights into the precise pre-doping modulation of surface active sites for designing highly efficient and stable CO2RR catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4032-x
This study introduces a dual-compatibility third component as an interfacial modifier to precisely regulate the active layer morphology of bulk heterojunction organic solar cells (BHJ-OSCs). This approach successfully suppresses excessive phase separation, significantly enhancing the performance of thick-film devices. The interface-styling strategy enhances donor–acceptor interactions, optimizes vertical phase separation morphology, extends exciton diffusion length, improves exciton dissociation efficiency, facilitates efficient charge transport, and effectively suppresses trap-assisted recombination. The ternary device based on PM6:PCN3:PY-IT achieved a power conversion efficiency (PCE) of 19.41%, which was much higher than that of the PM6:PY-IT binary system (18.67%). The device maintains excellent performance at an active layer thickness of 200 nm, achieving a high PCE of 18.25%. This study demonstrates the significance of using dually compatible molecules for interface modification in all-polymer solar cells (all-PSCs), providing theoretical guidance for the fabrication of high-performance thick-film devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4051-x
Graphite lubricants are critical for high-quality and high-efficiency drawing of refractory metal wires, yet inadequate dispersion stability frequently challenges their practical application. Inspired by the bio-surfactant synergic mechanism that combines different bio-surfactants to collectively reduce surface energy and friction, a binary anionic surfactant system comprising sodium dodecyl benzene sulfonate (SDBS) and sodium lignosulfonate (SL) was engineered to enhance dispersion and stability via a synergistic effect. The synergistic parameter β was calculated to be −2.34, indicating strong synergism. The resulting graphite lubricants maintained homogeneous dispersion for up to 60 days. Molecular dynamics (MD) simulations combined with density functional theory (DFT) calculations confirmed that the synergistic effects originate from steric hindrance, electrostatic repulsion, π-π stacking, and hydrogen bonding. These hierarchical secondary interactions collectively increased the interfacial formation energy at the graphite/surfactant/water tri-phase interface, thereby effectively wetting particle powders and enhancing stability. During metal wire drawing, the graphite lubricants reduced the friction coefficient between the die and metal wires to 0.06, ultimately enabling drawn tungsten wires with superior surface integrity, expanded loop diameter, and enhanced tensile strength relative to single-surfactant benchmarks. This study provides experimental and theoretical guidance to design effective graphite lubricants for high-quality drawn metal wires.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4081-y
The evolution of precision medicine has propelled multimodal imaging-guided phototheranostics to the forefront for precise tumor diagnosis and therapy. Low-temperature photothermal therapy (PTT) offers a promising approach for the treatment of melanoma due to its non-invasiveness and minimal damage to normal tissues. However, its efficacy is limited by cancer cell thermal tolerance. To address this, a new type of multifunctional energy disruptor (CAMeO-Q NPs) is developed featuring homologous targeting and mitochondria targeting, and synergistically enhancing low-temperature PTT in melanoma by reversing heat shock protein 90 (Hsp90)-mediated thermal tolerance and blocking mitochondrial adenosine triphosphate (ATP) biosynthesis. The multifunctional energy disruptor enables precise trimodal imaging (fluorescence imaging/FLI, photoacoustic imaging/PAI, and photothermal imaging/PTI) guidance for low-temperature PTT. Comprising a mitochondria-targeting photothermal agent and an Hsp90 inhibitor, CAMeO-Q NPs induce selective mitochondrial damage under 660 nm laser irradiation and downregulate cellular HSP expression by ATP inhibition and Hsp90 inhibitor. This multifunctional energy disruptor provides a novel strategy for enhancing multimodal imaging-guided low-temperature photothermal therapy through combined homologous targeting, mitochondria-targeting, and Hsp90 inhibition.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60668-8
A series of Co-based molecular sieve catalysts with varying Si/Al ratios was synthesized via impregnation. Microstructural properties of Co active sites were characterized by XRD, TEM, Raman, H2-TPR, Py-FTIR, and XPS. Results indicate that surface Co species predominantly exist as CoOx nanoclusters and isolated Co2+, with the latter exhibiting superior N2O decomposition activity. Decreasing the Si/Al ratio of the MFI zeolite promotes the formation of isolated Co2+ active sites, thereby enhancing catalytic performance. Compared to Co/S-1 (pure silica support), the Co/HZ60 catalyst (low Si/Al ratio ZSM-5) lowers the temperature for complete N2O decomposition by 80 °C and demonstrates excellent resistance to O2 and NO. The strong interaction between the zeolite framework and Co2+ inhibits oxidation to Co3+, improving N2O adsorption and activation. This work provides a rational design strategy for efficient and stable Co-based catalysts for N2O abatement in industrial tail gases.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4048-x
Selective oxidation of aromatic alkanes is a key reaction to produce high-value chemicals in the chemical industry. However, the strong C–H bonds and inert chemical properties of aromatic alkanes render the oxidation process difficult, thereby making the development of promising and sustainable catalysts highly desirable. Herein, a resin-assisted coordination co-assembly strategy is developed to synthesize heterometal-doped mesoporous Co3O4 with abundant oxygen vacancies, enabling precise control over both composition and pore structure. The site-specific Mn doping at octahedral sites of mesoporous Co3O4 promotes the formation of oxygen vacancy with enhanced activity. Density functional theory calculations further demonstrate that Mn doping in mesoporous Co3O4 reduces the oxygen vacancy formation energy, induces the electronic structure modifications and introduces the defect energy levels, finally promoting the efficient catalytic oxidation of a series of aromatic alkanes. Representatively, Mn-doped mesoporous Co3O4 exhibits remarkably outstanding catalytic activity, achieving 37% conversion of ethylbenzene and 97% selectivity for acetophenone under solvent-free conditions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4096-7
Hexagonal boron nitride (h-BN) nanomaterials exhibit exceptional properties but suffer from severe aggregation due to undesirable surface characteristics, limiting their application in polymer nanocomposites. Existing covalent functionalization methods often compromise between time efficiency, energy consumption, and structural integrity. This study presents a rapid, room-temperature catalytic grafting strategy using tris(pentafluorophenyl)borane (B(C6F5)3) to functionalize h-BN nanoflakes bearing edge hydroxyl groups. The reaction between B–OH groups and activated Si–H bonds of hydrosilanes proceeds under mild conditions, preserving the structural integrity of h-BN. Density functional theory (DFT) calculations confirm the catalytic feasibility and elucidate two possible reaction pathways: backside-attack and flank-attack mechanisms. The modified h-BN exhibits significantly improved dispersibility in low-polarity solvents and tunable surface properties. This efficient method offers a versatile platform for h-BN surface engineering, facilitating broader practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4062-2
Metalloimmunology, an emerging interdisciplinary field, is reshaping our understanding of the immune system at an unprecedented pace. This review systematically elaborates on the core roles of metal ions as critical signaling molecules and metabolic regulators in both innate and adaptive immunity. Special focus is placed on the molecular mechanisms by which metal ions modulate key immune signaling pathways, as well as their mediation of novel immunogenic cell death modalities including ferroptosis, cuproptosis, and pyroptosis. Furthermore, we comprehensively review innovative metal ion-based therapeutic strategies, encompassing metal nanoadjuvants, metal-organic frameworks and nanozymes, along with their cutting-edge applications in cancer, infectious diseases, autoimmune disorders, and tissue repair. Finally, this review delves into the challenges faced by this field in targeted delivery, biosafety, and clinical translation, and provides an outlook on its future development directions with particular emphasis on the immense potential of precisely regulating metal homeostasis for the treatment of autoimmune diseases.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4146-8
The conventional trial-and-error approach for the research and development (R&D) of high-performance super-hydrophilic coatings presents long-standing challenges, including data scarcity, unclear structure-activity relationships, and lack of design guidelines. In this study, an innovative multi-model framework that synergistically integrates a specialized polymer large language model (PolyLLM) and a polymer machine learning model (PolyML) for intelligent R&D of super-hydrophilic coating systems is designed and demonstrated. During the hydrophilic polymer research phase, the multi-model leverages the domain-specific insights and chemical tool capabilities of the fine-tuned PolyLLM to systematically screen 852 hydrophilic monomers and generate 3880 hypothetical polymer architectures. By utilizing the PolyML, the multi-model enables precise performance predictions and quantitative evaluations of feature importance to facilitate efficient high-throughput screening of optimal structures from the generated polymer database. Experimental validation confirms that the multi-model achieves a mean absolute error (MAE) below 10% across various polymer property prediction tasks compared to experimental data. This approach leads to the rapid discovery of hydrophilic polymers with exceptional anti-swelling and wear-resistance. In developing super-hydrophilic coatings, the multi-model effectively combines PolyLLM's guidance for large-scale synthesis with PolyML's capabilities for precise formulation optimization and curing parameter adjustments. The effectiveness of multi-model is demonstrated by the accelerated development of high-performance anti-fogging coatings for swim goggles and optical films with outstanding water- and wear-resistance that significantly outperform leading commercial products. This multi-model offers a flexible approach for advanced polymer coatings, leading to a seamless connection between laboratory research and industrial development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3631-1
Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.