SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4339-7
Neuromorphic computing demands energy-efficient synaptic devices that emulate biological plasticity. Optoelectronic memristors based on colloidal quantum dots (QDs) offer tunable bandgaps and solution processability, yet suffer from defect-mediated nonradiative recombination and instability. Here, we report ZnS-passivated CdZnSe core/shell QDs as the active layer in memristive devices, achieving enhanced synaptic emulation and information encryption. Time-resolved photoluminescence (TRPL) decay curves were fitted with a tri-exponential function, revealing that ZnS passivation suppresses defect-related trap states, prolonging the average carrier lifetime from 12.3 ns (CdZnSe) to 28.7 ns (CdZnSe/ZnS). The intensity proportion of the fast decay component (τ1 ≈ 1.2 ns) decreased from 45% to 18%, indicating reduced surface trapping. Devices incorporating CdZnSe/ZnS QDs exhibit stable bipolar resistive switching with an ON/OFF ratio exceeding 10^3, endurance of >10^3 cycles, and retention of >10^4 s. Under 365 nm UV illumination, the devices show light-tunable synaptic plasticity, including paired-pulse facilitation (PPF) with a facilitation index of 180% at a 50 ms interval, and transition from short-term to long-term memory. The memristors successfully emulate essential synaptic functions and are employed in a simple encryption scheme, demonstrating the potential of defect-passivated QDs for secure neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4292-4
The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4192-y
Electrochemical water splitting is pivotal for scalable green hydrogen production, yet its practical deployment hinges on cost-effective electrocatalysts with high activity and durability. This study introduces a low-cost, three-dimensional (3D) nanoporous ZrVFeCoNi material fabricated via chemical dealloying, at merely 0.16% of the cost of Pt. The structure-activity relationship between its microstructure and hydrogen evolution reaction (HER) performance was systematically explored. Lattice defect effects from multiphase intermetallic compounds, combined with multi-metal synergy, optimize H+ adsorption energy and electron transfer kinetics. The 3D nanoporous architecture provides a high electrochemical surface area with abundant active sites, enhancing electrolyte penetration and reducing interfacial mass transfer resistance. Consequently, the ZrVFeCoNi electrode exhibits outstanding HER performance, requiring only a 38 mV overpotential to reach 10 mA cm−2 and maintaining stable operation for 1000 h at 500 mA cm−2. Integrated into a full water electrolyzer (ZrVFeCoNi || IrO2/Ni), the system achieves a cell voltage of 1.60 V at a current density of 400 mA cm−2. Advanced characterization and density functional theory (DFT) calculations reveal that interfacial interactions and charge transfer at heterointerfaces drive catalytic activity, showcasing the potential of 3D nano-structured multiphase intermetallic compounds as high-performance electrocatalysts for green hydrogen systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3432-8
This correction addresses an error in the labeling of author affiliations in the original publication (Sci China Mater, 2025, 68: 1561, DOI: 10.1007/s40843-024-3290-9). The corrected affiliations are as follows: Fuxia Huang, Feng Wang, Ya Liu, and Liejin Guo are affiliated with the International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Yifei Liu is affiliated with the School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. The correction was made upon the request of the authors and with approval from the respective institutions. The original article focused on crystal defects engineering of BiOI to enhance photocatalytic CO2 reduction to C2 products, a critical area for sustainable fuel synthesis. This correction ensures accurate attribution and institutional recognition, which is essential for research integrity and reproducibility. No changes were made to the scientific content or conclusions of the original study.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3670-7
Proton exchange membrane fuel cells (PEMFCs) are a promising sustainable energy conversion technology due to their environmental friendliness and high efficiency. However, the sluggish kinetics of the four-electron oxygen reduction reaction (ORR) necessitate cathode catalysts requiring over five times the amount of precious metal Pt compared to the anode, limiting widespread PEMFC application. The U.S. Department of Energy emphasizes developing non-precious metal-based catalysts as cost-effective alternatives. Transition metal single atoms (Mn, Co, Cu) anchored on nitrogen-doped carbon (M–N–C) have been developed as efficient ORR electrocatalysts, but most exhibit excellent performance only in alkaline media. The typical MN4 planar coordination renders the central metal vulnerable to hydrogen ion attack, challenging activity and durability in acidic media. Recent studies propose that axial-N coordination enhances stability of atomically dispersed Fe sites for acidic ORR by creating a barrier to Fe dissolution. The induced square-pyramidal crystal field diminishes spin polarization in dz2, dxz, and dyz orbitals, enhancing electronic delocalization of the Fe atom, allowing adsorbed O2 to maintain a low-energy triplet ground state, facilitating activation and reduction. Wang and coworkers constructed a novel curved-surface Fe–N–C (CS Fe/N–C) catalyst with FeN4 single atoms distributed within graphitized multilayered nanoprotrusions on 2D carbon layers. The nanoprotrusions have a mean diameter of ~10 nm and protrude ~4 nm. The curved regions exhibit a high Fe site density of ~1.6 No. nm−2, with 97.6% located deep in the fourth layer, contrasting with lower and more random distribution in planar regions and 2D Fe/N–C. This distribution aligns with iron atom diffusion from core to outer layers during pyrolysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3838-5
Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics, including breathable wearables, on-skin devices, and bio-integrated electronics. However, conventional metallization strategies, such as sputtering and ink-printing, often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks, leading to device short-circuiting, operational failure, and limited vertical integration. Here, we present a solvent-selective dissolution-assisted transfer printing strategy to achieve surface-confined metallization of ultrathin, lightweight, and gas-permeable nanofibrous networks, enabling lateral conductivity while maintaining vertical insulation. This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding. Meanwhile, the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity (2 Ω cm) and vertical insulativity (10^11 Ω cm). The resulting anisotropic conductive networks enable low-voltage wearable heaters, high-sensitive pressure sensors, and ultralight temperature sensors. A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification. The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable, ultrathin, and lightweight wearable electronics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60604-9
CO2 capture and utilization (CCU) technologies are critical for mitigating global warming and promoting resource circularity. Carbon-based materials, with tunable pore structures, abundant active sites, high specific surface area, and excellent chemical stability, show significant potential for CO2 capture and conversion. This review systematically analyzes the adsorption behaviors and performance variations of activated carbon, porous carbon, graphene, and carbon nanotubes in CO2 capture. For utilization, recent advances in catalytic applications for methanation, reverse water-gas shift (RWGS), dry reforming of methane (DRM), and alcohol synthesis are emphasized. The benefits and drawbacks of carbon materials regarding adsorption capacity, catalytic activity, and stability are evaluated, and their potential in integrated CCU technologies is discussed. Key strategies for enhancing performance through structural modulation and surface modification are elucidated. This review provides theoretical guidance for future development and large-scale implementation of carbon-based materials in CCU.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0026
The catalytic hydrogenation of carbon dioxide (CO2) to light olefins (C2–C4) represents a pivotal route for mitigating greenhouse gas emissions while producing high-value chemical feedstocks. This review systematically examines the two principal technological pathways: CO2-Fischer-Tropsch synthesis (CO2-FTO) and CO2-methanol-to-olefins (CO2-MTO). The CO2-FTO route couples reverse water-gas shift (RWGS) with Fischer-Tropsch synthesis, whereas CO2-MTO proceeds via methanol intermediate. Key challenges arise from the thermodynamic stability of CO2 (C=O bond dissociation energy ~750 kJ/mol) and kinetic limitations. The review critically evaluates the influence of catalyst promoters (e.g., Na, Mn, Cu), support structures, and surface defect site concentrations on CO2 activation and olefin selectivity. For zeolite-based catalysts, pore architecture and acidity are shown to govern methanol conversion to olefins. Representative data from the literature indicate that Fe-based catalysts with Na promotion achieve CO2 conversion up to 40% with olefin selectivity exceeding 50% under optimized conditions. The review underscores the necessity of integrating catalyst design with reactor engineering to overcome thermodynamic constraints and achieve industrially viable performance.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225185
Sulfur hexafluoride (SF6), widely used as an insulating gas in high-voltage electrical equipment, possesses a global warming potential (GWP) 25,200 times that of CO2, necessitating efficient degradation technologies. This study employed computational fluid dynamics (CFD) to simulate the thermal catalytic degradation of SF6 in a fixed-bed reactor, integrating models for porous media, heat transfer, turbulence, and chemical kinetics. The simulations revealed significant radial non-uniformities in pressure, velocity, temperature, and species concentration distributions, with temperature identified as the dominant factor influencing degradation efficiency. Radial temperature gradients caused uneven reaction rates, with degradation rates near the wall substantially exceeding those at the central axis, thereby reducing overall SF6 conversion. To address this, structural optimizations were implemented, including reducing the reactor tube diameter and incorporating inert porous media with high thermal conductivity at both ends of the catalytic section. These modifications enhanced radial heat transfer, homogenized the temperature field, and improved the uniformity of reaction rates and species concentrations. Parametric studies on inlet gas velocity showed that both excessively low and high flow rates were detrimental: low velocities led to underutilization of the downstream catalyst and increased energy consumption, while high velocities deteriorated heat transfer and exacerbated radial temperature gradients. The optimal inlet velocity range was determined to be 0.4–0.8 m/s for a reactor tube inner diameter of 10 mm, balancing catalyst utilization, energy consumption, and degradation efficiency. This research provides data-driven guidance for the design and scale-up of SF6 catalytic degradation reactors.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010306
Sulfur autotrophic denitrification (SAD) has attracted increasing attention due to its low cost, no need for external carbon sources, and low sludge production. This review systematically examines the reaction principles and key material elements of various electron donors for SAD, including elemental sulfur, sulfide, thiosulfate, and iron sulfide. It discusses recent research progress on different SAD processes and the influence of environmental factors. A comparative analysis between heterotrophic denitrification and SAD highlights SAD's advantages in reaction rate, secondary pollution, and cost-effectiveness, underscoring its promising application prospects. Notably, iron sulfide-based autotrophic denitrification maintains stable pH and produces fewer by-products (e.g., sulfate, nitrous oxide). When developed into an aggregate sulfur concrete system, it can purify nitrogen and phosphorus from secondary effluent standards to Class IV surface water standards within a hydraulic retention time of only 0.5–2 hours, addressing the contradiction between SAD reaction rate and engineering demands. This enables efficient simultaneous nitrogen and phosphorus removal, making it viable for groundwater remediation, advanced wastewater treatment, eutrophication control, and deep nitrogen removal. The national 'Dual Carbon Strategy' (carbon neutrality and peak) positions SAD as a promising method for wastewater treatment plants to meet increasingly stringent nitrogen and phosphorus discharge standards.
Environmental Chemistry•2026•DOI: 10.0000/202605-1
A method for the determination of hydrazoic acid and sodium azide in workplace air was established using ion chromatography with suppressed conductivity detection. Vapor and mist states of hydrazoic acid were collected in 40 mg·L−1 KOH absorption solution, while sol states of hydrazoic acid or sodium azide were collected on microporous membranes and eluted with 40 mg·L−1 KOH. Separation was performed on a Dionex IonPac™ AS11-HC (250 mm × 4.0 mm) anion analytical column with KOH gradient elution, followed by suppressed conductivity detection. The azide ion (N3−) exhibited good linearity in the range of 0.005–0.5 mg·L−1, with a correlation coefficient (r) of 0.9997. The limit of detection (S/N=3) was 0.002 mg·L−1, and the limit of quantification (S/N=10) was 0.005 mg·L−1. The minimum quantifiable concentrations in air were 0.00256 mg·m−3 for hydrazoic acid and 0.00387 mg·m−3 for sodium azide, based on a 10.0 mL sample solution and a 20 L air sample. Spiked recoveries ranged from 92.0% to 100.4%, with relative standard deviations (RSD, n=6) between 0.76% and 2.51%. The method is efficient, accurate, and sensitive, suitable for monitoring and safety assessment of hydrazoic acid and sodium azide in workplace air.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3820-5
Two novel N-heterocyclic carbene (NHC)-based ligands featuring rigid boron-oxygen (BO) fused-ring units, named Bpmi and Bpmb, and the two corresponding homoleptic meridianal iridium complexes, namely mer-Ir(Bpmi)3 and mer-Ir(Bpmb)3, were designed and synthesized. Single-crystal structures revealed a meridional coordination geometry for both complexes. Shorter Ir–C carbene bond lengths and rigid planar BO-fused ring units contribute to enhanced stability. Both complexes exhibit efficient green phosphorescence (λem = 536/521 nm in toluene, ΦPL > 78%) with short lifetimes (τ = 846/1083 ns), leading to high radiative rate constants (Kr = 10.04 × 10^5 and 7.29 × 10^5 s−1, respectively). Theoretical calculations indicate significantly increased metal-to-ligand charge transfer (MLCT) character (21.69% for mer-Ir(Bpmi)3; 17.30% for mer-Ir(Bpmb)3) compared to reference complexes (13.01% for mer-Ir(pmi)3; 15.99% for mer-Ir(pmb)3). Both complexes exhibit exceptional thermal stability with decomposition temperatures of 491°C (mer-Ir(Bpmi)3) and 540°C (mer-Ir(Bpmb)3). OLED devices using mer-Ir(Bpmb)3 and mer-Ir(Bpmi)3 as emitters demonstrate maximum external quantum efficiencies of 20.0% and 15.6%, respectively. This research pioneers boron-fused ring-containing NHCs and their phosphorescent iridium(III) complexes, establishing a novel design strategy for high-performance NHC-based OLED phosphorescent emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3942-2
Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3851-3
Aqueous zinc-ion batteries (AZIBs) face critical challenges from zinc anode instability, including corrosion, hydrogen evolution reaction (HER), parasitic byproduct formation, and uncontrolled dendrite growth. To address these issues, we developed a multifunctional cerium-based metal-organic framework (Ce-MOF) coating for zinc anodes. The coating features an ordered porous structure and inherent properties that mitigate HER, suppress side reactions, and inhibit dendrite formation. Symmetric cells using Ce-MOF/Zn demonstrated exceptional cycling stability for over 2060 h at 0.5 mA cm−2 with a low hysteresis polarization of 26 mV. In full cells with an I2@AC cathode, the Ce-MOF/Zn||I2@AC achieved outstanding cycling stability of 28,550 cycles at 5 A g−1, with 91% capacity retention (109.6 mAh g−1). Through integrated characterization employing in-situ optical microscopy, ex-situ XRD, SEM, and DFT calculations, we elucidated the multifunctional mechanism: the Ce-MOF coating facilitates preferential (002)-oriented Zn deposition to suppress dendrites, reduces Zn2+ desolvation energy to enhance deposition kinetics, and modulates interfacial chemistry to mitigate HER and corrosion. This work establishes Ce-MOF coatings as a simple yet powerful strategy for developing high-performance zinc anodes, providing critical insights for advancing practical AZIB technologies.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60676-7
Landfilled municipal solid waste (MSW) in China exceeds 8 billion tons, with high moisture (30–50%) and ash content (>50%), complicating conventional treatment. Slag gasification offers a clean and resource-oriented route, but heavy metal leaching from the resulting slag poses environmental risks. This study investigates the effect of rice husk addition (5–15%) on the vitrification of landfilled-waste slag and the immobilization of heavy metals (Cr, Zn, Cu). Results show that adding 5–10% rice husk lowers the slag flow temperature to a minimum of 1213 °C, attributed to active SiO2 reacting with CaO and Fe2O3 to form low-melting eutectics like anorthite. Leaching concentrations of Cr and Zn decrease from 41.60 and 108.00 mg/L to 5.89 and 7.10 mg/L, respectively, with 10–15% rice husk. The amorphous SiO2 enhances silicate polymerization (Q3, Q4 networks), promoting physical encapsulation and chemical incorporation of heavy metals into stable phases such as Zn2SiO4 and CuFe2O4, increasing the residual fraction and reducing bioavailability. At temperatures >1400 °C, volatilization of Cu and Zn increases, with residual rates dropping to 33–60% and 31–55%, respectively, while Cr remains stable (70–123%). This work elucidates the mechanistic role of rice husk in slag structure modulation and heavy metal immobilization, providing a theoretical basis for the co-treatment of landfilled waste and biomass via a 'treating waste with waste' strategy.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026051001
Haikou, a representative tropical city in China, experiences air pollution influenced by both local emissions and regional transport. This study analyzed O3 and PM2.5 concentrations, emission sources, and meteorological fields from Haikou and Guangdong-Guangxi cities in 2024, employing correlation analysis and the Weighted Potential Source Contribution Function (WPSCF) to systematically investigate spatial-temporal patterns, regional linkages, and transport mechanisms. Results revealed distinct pollution characteristics: Hainan exhibited prominent O3 pollution in autumn and winter, while the Pearl River Delta (PRD) in Guangdong suffered significant O3 pollution year-round, positioning it as the core control area. Guangxi was characterized by severe PM2.5 pollution in winter with extensive high concentration areas. Haikou's O3 and PM2.5 concentrations showed strong correlations with those in Zhanjiang and Maoming throughout the year, particularly in winter. Regional transport analysis indicated that O3 pollution in Haikou depended on stable cross-regional precursor transport coupled with intense photochemical conditions, whereas PM2.5 exhibited diverse transport pathways across seasons. Lag effect analysis confirmed that pollution exceedance days were substantially influenced by upwind transport from the previous day, highlighting the dominant role of cross-regional physical transport. Autumn pollution was driven by stable surface northeasterly winds and upper-level uniform pressure fields. Potential source areas were highly consistent with the MEIC emission inventory, confirming distinct contributions of transport pathways for O3 and PM2.5. These findings provide a scientific basis for differentiated collaborative control of air pollution in tropical coastal cities.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4032-x
This study introduces a dual-compatibility third component as an interfacial modifier to precisely regulate the active layer morphology of bulk heterojunction organic solar cells (BHJ-OSCs). This approach successfully suppresses excessive phase separation, significantly enhancing the performance of thick-film devices. The interface-styling strategy enhances donor–acceptor interactions, optimizes vertical phase separation morphology, extends exciton diffusion length, improves exciton dissociation efficiency, facilitates efficient charge transport, and effectively suppresses trap-assisted recombination. The ternary device based on PM6:PCN3:PY-IT achieved a power conversion efficiency (PCE) of 19.41%, which was much higher than that of the PM6:PY-IT binary system (18.67%). The device maintains excellent performance at an active layer thickness of 200 nm, achieving a high PCE of 18.25%. This study demonstrates the significance of using dually compatible molecules for interface modification in all-polymer solar cells (all-PSCs), providing theoretical guidance for the fabrication of high-performance thick-film devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3978-0
All-polymer solar cells (all-PSCs) are promising for flexible and wearable electronics due to their excellent stability and mechanical stretchability. However, achieving high performance remains challenging due to difficulties in controlling the morphology of polymer blend films. In this study, a novel polymer donor, PBDTF-DTP, incorporating a weak electron-withdrawing yet large-dipole-moment dithienylphthalimide (DTP-2T) unit, was rationally designed and synthesized for ternary all-PSCs. Introducing PBDTF-DTP as a guest donor enables complementary light absorption and deepens the highest occupied molecular orbital level, simultaneously improving short-circuit current density (J_SC) and open-circuit voltage (V_OC). The large dipole moment of DTP-2T increases the dielectric constant, suppressing non-radiative energy loss and further boosting V_OC. Notably, PBDTF-DTP exhibits a relatively higher molecular electrostatic potential than the host donor, effectively tuning compatibility with both polymer donor and acceptor, regulating blend morphology, and promoting formation of a nanoscale fibrillar network. This optimized morphology facilitates efficient charge generation and transport while suppressing charge recombination. Consequently, ternary all-PSCs based on PM6:PBDTF-DTP:PYIT achieve a synergistic enhancement in J_SC, V_OC, and fill factor, yielding a remarkable power conversion efficiency of 18.01%, significantly higher than that of binary PM6:PYIT devices (15.51%). This study demonstrates that combining electrostatic potential optimization with a ternary strategy provides an effective approach to regulate morphology and achieve high-efficiency all-PSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4009-0
Micro light-emitting diode (Micro-LED) display technology is a promising next-generation display technology due to its high brightness, high contrast, low power consumption, long life, and fast response. However, aggressive downscaling of Micro-LEDs to a few microns makes lift-off fabrication of metal bumps for soldered joints between Micro-LEDs and driver substrates increasingly difficult, challenging high-yield bump arrays under high-density conditions. This study innovatively replaces conventional metal bumps with a photosensitive conductive polymer (PCP), enabling fabrication of polymeric micro-bump arrays via well-established photolithography, bypassing complex lift-off processes and reducing short-circuit risk. Isopropyl alcohol regulates developer wettability for optimal development, yielding bump arrays with bump size 20 μm × 12 μm and height (1.9288 ± 0.0213) μm on thin-film transistor (TFT) drivers with yield over 99.99%. The issue of low bonding yield from polydimethylsiloxane (PDMS) thermal expansion was resolved by adjusting chip spacing on the temporary substrate, achieving bonding yield exceeding 99.8%. A 0.99-inch full-color Micro-LED display with density 114 pixels per inch (PPI) and brightness 5537 cd/m² was fabricated. High-yield bump arrays, Micro-LED arrays, and high bonding yield are highly reproducible, promoting development of Micro-LED displays and related fields.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4085-9
Bone defects remain a prevalent clinical challenge, and regenerative medicine based on bone tissue engineering offers promising solutions. Traditional osteogenic materials rely on bioactive macromolecules like growth factors, which suffer from poor stability and stringent storage requirements. From a structural perspective, bone tissue resides in a phosphorylated microenvironment, with 65–70% of inorganic components composed of hydroxyapatite. Inorganic phosphorylated materials induce osteogenic differentiation but exhibit high stiffness, brittleness, slow degradation, and limited mechanical tunability. Synthetic phosphorylated polymers with excellent mechanical properties and biocompatibility have been developed to address these issues. In this work, we developed a series of phosphorylated polymers derived from poly(glycerol sebacate) (PGS), a biocompatible and biodegradable material. Leveraging the hydroxyl-rich backbone of PGS, we demonstrated an efficient method for controllable phosphorylation of PGS side chains, enabling synthesis of PGS-based phosphorylated (PGS-P) polymers with tunable phosphorus contents. The optimized phosphorylated polyester, PGS-P4, exhibited strong ability to promote osteogenic differentiation of rat BMSCs, and its porous three-dimensional scaffolds showed favorable properties for bone regeneration. BMSCs cultured for one week and observed by fluorescence microscopy showed enhanced BSP protein expression on PGS-P2, PGS-P4, and PGS-P6 groups compared with PLGA and PGS, with PGS-P4 displaying the most intense signal. In summary, we present a simple and controllable method for preparation of functionalized polyesters and their porous scaffolds with tunable phosphorus content, validating its effectiveness in promoting osteogenic differentiation of rat BMSCs. All phosphorylated polyesters exhibit enhanced differentiation-promoting effects compared to non-phosphorylated PGS; however, the degree of enhancement does not increase monotonically with phosphorus content. PGS-P4, containing an optimal phosphorus level, shows the most pronounced biological functions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4332-3
This correction addresses an error in the affiliations of the authors of the article 'Intrinsic pseudocapacitive Na0.44MnO2 prepared by novel ion-exchange method for high rate and robust sodium-ion batteries' originally published in Science China Materials, volume 66, issue 10, 2023, pages 3810–3816. In the original publication, one affiliation of the first author (Yuge Cao) was missing, and the affiliations of the authors were incorrectly labeled. The corrected affiliations are as follows: Yuge Cao is affiliated with the State Key Laboratory of High-Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; the Beijing National Laboratory for Molecular Sciences and State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China; and the Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China. The other authors' affiliations are also corrected accordingly. The corresponding authors are Hui Bi ([email protected]) and Fuqiang Huang ([email protected]). This correction does not affect the scientific content of the original article.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3551-5
Flexible photonic crystal (PC) materials exhibit exceptional optical properties but suffer structural degradation under repeated mechanical stress, leading to photonic band gap impairment and limited sustainability. This study introduces a self-healing thermoplastic polyurethane (STPU) with an inverse-opal PC structure, inspired by natural structural coloration and self-healing mechanisms. Synergistic dynamic covalent disulfide bonds and hydrogen bonds enable reversible mechanical adjustment, yielding a tensile strength of 26.76 MPa and elongation at break of 2000%. The inverse opal structure facilitates reversible color transitions in response to solvents (water, ethanol) and mechanical strain (0–70%) via lattice spacing modulation. Incorporating an interpenetrating network of polyacrylamide hydrogel and carbon nanotubes enhances strain sensitivity and structural color stability. The material demonstrates broad potential in flexible sensors, adaptive optical devices, bioinspired robotic skins, and dynamic anti-counterfeiting encryption, overcoming traditional PC limitations such as high fragility and single functionality. This strategy advances durable intelligent sensing materials with enhanced environmental adaptability and multifunctional integration.