SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4204-4
Heterodimensional superlattices, integrating materials of different dimensionalities (e.g., 0D, 1D, 2D) within a periodic structure, have attracted significant attention due to their unique electronic structures and emergent properties arising from inter-dimensional coupling. This review comprehensively summarizes the state-of-the-art preparation strategies, distinctive physical properties, and diverse applications of these emerging systems. Beyond conventional epitaxial growth and chemical intercalation methods, recent advances include van der Waals assembly and phase engineering, enabling precise control over layer stacking and interfacial interactions. Key properties discussed include tunable electronic band structures, enhanced spin-orbit coupling, and emergent phenomena such as the in-plane Hall effect, which are promising for spintronic devices. The review also highlights applications in energy storage and conversion, where heterodimensional superlattices exhibit improved ion transport and catalytic activity. Challenges remain in scalable fabrication and structural stability, but the field holds potential for next-generation electronics and energy technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4359-0
Organic solar cells (OSCs) require cathode interlayers (CILs) that combine high charge transport, defect passivation, and thickness insensitivity for scalable manufacturing. Here, we report the synthesis of a novel A-D-A-A'-type polymer, PDPP2F-NDI-N, via the green and efficient direct arylation polymerization (DArP) method. The multiple electron-deficient units in the backbone confer strong electron-withdrawing character, effective work function modulation, enhanced built-in potential, high crystallinity, and ordered molecular packing. PDPP2F-NDI-N exhibits a high electron mobility of 1.01 × 10⁻³ cm² V⁻¹ s⁻¹ and electrical conductivity of 3.13 × 10⁻³ S m⁻¹, facilitating efficient charge extraction and transport. Its interfacial modification capability suppresses interfacial defects and reduces non-radiative recombination losses. In ternary OSCs, PDPP2F-NDI-N achieves a high power conversion efficiency (PCE) of 20.44%, with outstanding thickness insensitivity retaining 92.8% of peak PCE at a 30 nm CIL thickness, and a T80 lifetime exceeding 1700 hours under photo-thermal aging. This work demonstrates that poly(A-D-A-alt-A') backbone design combined with DArP synthesis provides an effective strategy for developing high-performance, thickness-insensitive, and stable polymeric CILs, advancing efficient, stable, and scalable OSC applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4110-9
Flexible tactile sensors are pivotal for human-machine interaction, yet accurate decoupled sensing of three-dimensional (3D) forces and integration into functional systems remain challenging. Here, we present a piezoresistive 3D force sensor based on ionic hydrogels that detects and analyzes multi-directional forces. The sensor exhibits a linear response to normal forces from 1 to 25 N (R²=0.99) and maintains stable sensitivity for shear forces within 0–4 N. By incorporating both force magnitude and direction, the sensor enables multidimensional password input, expanding traditional one-dimensional passwords into numeric, alphabetic, and Morse code formats. Experimental results demonstrate significant potential for enhancing information security. The sensor's simple structure, mature fabrication, and ease of integration with flexible electronics underscore its practicality. This work addresses the bottleneck of unidirectional sensing in conventional flexible pressure sensors, offering a robust solution for multidimensional force acquisition in human-machine interfaces, soft robotics, and biomechanical monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61066-9
Carbon materials suffer from limited dielectric loss, resulting in poor impedance matching and inadequate microwave attenuation. To address this, hierarchical structures with synergistic loss mechanisms are sought. Here, biomass cattail serves as a sustainable precursor for nitrogen-doped carbon nanotube arrays decorated with Fe3C nanoparticles via chemical vapor deposition, yielding Fe3C@NCNTs/CMTs composites. The crystallinity, tuned by calcination temperature, critically influences microwave absorption. At 800 °C, the composite achieves a minimum reflection loss of –35.8 dB and an effective absorption bandwidth of 7.02 GHz at a thickness of only 1.7 mm, with an ultralow filler loading of 10 wt%, covering the entire Ku band and part of the X band. This performance stems from enhanced magnetic loss and multiple dielectric polarization mechanisms. The study demonstrates a promising strategy for designing biomass-derived carbon-based broadband microwave absorbers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3807-8
Electrocatalytic co-reduction of CO2 and nitrate offers a sustainable route for urea synthesis, valorizing nitrogenous waste and CO2. However, achieving high-performance urea electrosynthesis under ambient conditions remains challenging due to the need for simultaneous activation of CO2 and efficient H2O dissociation to supply active *H for *NOx hydrogenation, ultimately forming key C- and N-containing intermediates for C–N coupling. Here, we report a bifunctional Pd-single-atom-modified Cu (Pd1Cu) nanorod catalyst that synergistically promotes adsorption and stepwise activation of CO2 and H2O, steering the reaction pathway toward selective urea synthesis. Integrating experimental evidence, in situ spectroscopy, and computational analyses, we disclose that atomically dispersed Pd sites kinetically favor co-generation of *CO and *NH2 via H2O dissociation-driven proton transfer, forming an optimal intermediate balance. The dual metal active sites enhance C–N coupling via combined electronic and geometric effects, substantially lowering the reaction energy barrier and improving selectivity. This work provides a rational design strategy for advanced multifunctional catalysts for urea electrosynthesis, contributing to carbon neutrality and waste nitrogen valorization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3581-2
Radiotherapy (RT) is a standard cancer treatment that directly kills tumor cells and promotes systemic immune responses. However, RT can exacerbate tumor hypoxia, which suppresses dendritic cell (DC) antigen presentation and weakens systemic anti-tumor immunity. Here, we report oxygen-loaded in situ gels carrying bacterial outer membrane (MOGel) that slowly degrade to release oxygen and bacterial outer membrane (OM). Oxygen release alleviates tumor hypoxia, while OM continuously activates DCs, enhancing their antigen-presenting capability. In vitro, MOGel combined with RT induced the strongest tumor cell apoptosis. In an orthotopic colon cancer model, MOGel+RT achieved an 80% tumor suppression rate. Notably, MOGel+RT elicited an enhanced abscopal effect, with hypoxia relief and enhanced DC activation contributing to systemic immune responses. These findings suggest that OM-based oxygen gels offer a novel strategy to enhance systemic immune responses to RT.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3912-0
This erratum corrects an error in the Chinese name of co-first author Tianxiao Xiao (肖天孝) as originally published in the article 'A multi-modal smart chest patch for real-time cardiopulmonary monitoring and anomaly detection' (Sci China Mater, 2025, 68(12): 4413–4422). The corrected Chinese name is 肖天笑. The correction applies solely to the author's name and does not affect the scientific content, experimental data, or conclusions of the original paper. The authors and publisher apologize for any inconvenience caused.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024121201
A method for the simultaneous determination of 19 sulfonamide antibiotics in environmental aqueous samples was developed by integrating solid-phase extraction (SPE) and gel permeation chromatography (GPC) with ultra-performance liquid chromatography–triple quadrupole mass spectrometry (UPLC-MS/MS). Aqueous samples were filtered through 0.45 μm membranes, adjusted to pH 6, and treated with Na2EDTA at 2.5 mg·L−1 to mitigate matrix effects. Analytes were enriched on Oasis HLB cartridges, purified by GPC, and separated on a Hypersil GOLD C18 column (2.1 mm ID × 100 mm, 1.9 μm) using gradient elution with 0.05% (V/V) formic acid in water and methanol. Detection was performed in multiple reaction monitoring (MRM) mode with internal standard quantification. Under optimal conditions, limits of detection (LOD) and quantification (LOQ) ranged from 0.7–4.4 ng·L−1 and 2.8–17.6 ng·L−1, respectively. Recoveries from spiked real samples at 10, 200, and 400 ng·L−1 were 44.5%–102%, 47.7%–97.5%, and 51.4%–115%, with relative standard deviations (RSDs) of 1.8%–10%, 0.64%–5.9%, and 0.71%–4.6%, respectively. The method was applied to three surface waters and three municipal wastewater treatment plant effluents, detecting five sulfonamides at concentrations ranging from 1.82 to 3864 ng·L−1. The combined SPE-GPC cleanup effectively reduced matrix suppression, offering high sensitivity, precision, and robustness for routine monitoring of sulfonamide antibiotics in environmental waters.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012501
Dibutyl phthalate (DBP) is a ubiquitous environmental pollutant posing potential risks to aquatic ecosystems. This study assessed the developmental toxicity of DBP in Japanese medaka (Oryzias latipes) embryos. Embryos were exposed to gradient DBP concentrations (1, 5, 50, 500 μg·L−1, and 5 mg·L−1) for 15 days. Endpoints included embryonic heart rate, hatching time, survival rate, larval swimming behavior, and expression of genes related to cardiovascular, nervous, thyroid, antioxidant systems, and estrogenic effects. Results showed that 5 mg·L−1 DBP significantly reduced embryonic heart rate (P < 0.0001), leading to hatching failure and mortality. Exposure to 500 μg·L−1 DBP significantly reduced hatching rate (P < 0.01) and survival rate (P < 0.0001). DBP exposure caused developmental delay, cardiovascular hemorrhage, spinal curvature, yolk sac edema, and inhibited larval swimming behavior. At the molecular level, DBP significantly altered expression of atrap, dkk1, bnpa, fx, and dvl mRNA, affecting cardiovascular development; downregulated trha, mbp, and elavl3 mRNA, indicating endocrine disruption and neurotoxicity; upregulated cat, gpx2, and gsta mRNA, inducing oxidative stress; and upregulated vtg1, erβ1, and chgl mRNA, demonstrating estrogenic effects. This study demonstrates that DBP exposure adversely affects growth, development, hatching, survival, swimming behavior, and gene expression in Japanese medaka embryos, highlighting ecological risks of DBP pollution in aquatic environments.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010201
The Guanzhong region, traversed by the Wei River Basin, is one of the most industrially, agriculturally, and medically advanced and densely populated areas in Northwest China, has seen increasing attention paid to the pollution of perfluoroalkyl substances (PFASs) in its surface water environment. This study systematically investigated the pollution characteristics of PFASs in the surface water of this region and their ecological and health risks. By optimizing the online solid-phase extraction-liquid chromatography-tandem quadrupole mass spectrometry (Online SPE-LC/MS/MS), efficient detection of 19 PFASs was achieved, with the method detection limits ranging from 0.2 ng·L−1 to 0.3 ng·L−1, linear correlation coefficients all ≥ 0.990, and spiked recoveries between 75.2% and 130.0%. Monitoring data indicated that PFBA, PFPeA, PFHxA and PFOS, short-chain perfluorinated compounds, were the main pollutants in this region, with high detection frequencies and concentrations, but the overall content was lower than that in most areas of China. The concentrations of PFASs in surface water showed significant seasonal variations, with the highest concentrations during the dry season (∑19PFASs:126.1 — 2584.3 ng·L−1), followed by the normal season (∑19PFASs:3.5—3567.6 ng·L−1), and the lowest during the wet season (∑19PFASs:26.3—294.6 ng·L−1). Ecological risk assessment showed that, except for PFDoDA in the dry season, the ecological risk quotient (RQ) of all other PFASs was < 1. Although the water of the Wei River is not used as direct drinking water, health risk assessment indicated that all PFASs posed low risks, with only PFOA and PFOS showing potential risks (HR > 0.1) to adults and children at some sites during dry/normal seasons. This study provides a scientific basis for PFASs pollution control in the Wei River Basin.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225162
The effects of tempering temperature on the microstructure, strength-toughness balance, and precipitates of a quenched Cu-Cr-Ni ultra-high strength weathering steel were systematically investigated. The steel was austenitized at 920°C, quenched, and then tempered at 500°C, 550°C, and 600°C. Microstructural characterization was performed using optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), while mechanical properties were evaluated via tensile and low-temperature impact tests. Results showed that as the tempering temperature increased from 500°C to 600°C, the microstructure transformed from lath-shaped tempered sorbite to a non-lath morphology. The fraction of rod-like cementite decreased, while spheroidized cementite increased, and the size of MC (M = Ti, Nb, V, Mo) precipitates decreased from an average of 12.2 nm to 9.9 nm. Consequently, yield strength and tensile strength decreased from 935 MPa and 958 MPa to 866 MPa and 888 MPa, respectively, whereas total elongation and impact energy at -40°C increased continuously, reaching maximum values of 5.0% and 280 J at 600°C. When tempered at 550°C, the steel exhibited a yield strength of 895 MPa, tensile strength of 921 MPa, elongation of 4.3%, and impact energy of 271 J at -40°C, demonstrating an optimal combination of strength and toughness. This improvement is primarily attributed to the spheroidization of cementite and the uniform dispersion of fine MC precipitates, which alleviate stress concentration, along with the softening of the acicular ferrite matrix during tempering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4046-6
The deliberate control of framework dimensionality represents a powerful yet underexplored strategy for tailoring the functionality of homochiral metal-organic frameworks (HMOFs). Herein, we report a logical dimensional evolution from 1D and 2D to 3D HMOFs, achieved by tuning the connectivity of the auxiliary ligand. Employing a planar, three-connected ligand, 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine (Tpt), together with enantiopure tetracarboxylate of cyclohexane diamide linkers ((1R,2R/1S,2S)-cyclohexane-1,2-dicarbonyl bis(azanediyl)diisophthalate) (R,R/S,S-CHCAIP) and Zn2+ salts, a pair of 3D porous HMOFs (P/M-HMOF-5) was successfully constructed. The 3D framework features unique heart-shaped channels and a novel 4-(3,3,3,6)-connected topology. Structural analyses reveal trinuclear Zn3(μ3-O) clusters that, upon activation, generate open metal sites. These Lewis acid sites, synergizing with Lewis basic sites from the framework, confer efficient acid-base bifunctional heterogeneous catalysis for the synthesis of 2,3-dihydroquinazolinones in excellent yields (90%–98%). Furthermore, P/M-HMOF-5 serve as highly sensitive and enantioselective fluorescent sensors for amino acids and α-hydroxy carboxylic acids, with the highest discrimination observed for phenylalanine (KBH(D-Phe)/KBH(L-Phe) = 5.85 for M-HMOF-5). This work demonstrates how rational ligand connectivity steers dimensional evolution, enabling the integration of distinct catalytic and sensing functions within a single chiral platform, thereby providing a blueprint for the design of advanced multifunctional materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3928-4
Circularly polarized afterglow (CPA) materials provide an advanced optical signature to light emission, offering great potential for advanced photonic technologies. However, practical implementation remains challenging due to the lack of satisfactory performance, that is, high luminescence dissymmetry factor (g_CPA), long visualization time, and good processability. Here, we develop processable, full-color CPA materials composed of cholesteric liquid crystal polymers (CLCPs) and inorganic phosphors embedded in polymers, achieving a high g_CPA value of up to 0.74 and a long visualization time of 7 min. The materials are constructed with a bilayer structure comprising CLCPs and inorganic luminophors such as Y2O2S:Eu,Mg,Ti, SrAl2O4:Eu,Dy, and Sr2MgSi2O7:Eu. The CLCPs are synthesized from polymerizable liquid crystal monomer RM257, chiral dopants R/S5011, dipropylamine, photoinitiator Irgacure 651, cross-linker PETMP, and chain extender. The resulting materials exhibit excellent circularly polarized optics, enabling the implementation of circular polarization differential imaging (CPDI), where images are generated by subtracting two images captured through left- and right-handed circularly polarized filters. This work demonstrates the unique application of CPA in imaging, opening a new pathway for the use of purely inorganic solid-state luminophors in chiral functional materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511051
Photosynthetic bacteria (PSB) wastewater treatment technology is promising for simultaneous pollutant removal and resource recovery (e.g., single-cell protein, hydrogen). However, poor cell hydrophobicity and aggregation lead to low biomass retention and short sludge retention time, hindering engineering application. This study investigated the driving role and mechanism of upflow velocity as a key hydraulic selection pressure on PSB granulation under stepwise increasing organic loading rate (OLR). In laboratory up-flow photobioreactors (UPBR), comparative experiments were conducted with macro-index monitoring and micro-mechanism analysis. Results showed that under high upflow velocities of 3.00–6.30 m·h−1, PSB granular sludge with an average diameter of 285.58 μm and excellent settleability (sludge volume index, SVI = 22.73 mL·g−1) was successfully formed within approximately 60 days. Compared to the control, the granules in the experimental group were larger, with clear boundaries and compact structure, and significant enrichment of filamentous bacteria was observed. Mechanism analysis indicated that OLR provided nutritional driving force for microbial growth, while upflow velocity supplied high hydraulic shear force, physically screening and enriching settleable aggregates, and specifically inducing secretion of hydrophobic tryptophan-like proteins and humic acids (key extracellular polymeric substances, EPS). Additionally, core genera such as Xanthobacteraceae, possessing stress tolerance and EPS secretion functions, were enriched. This study reveals a chain mechanism of 'physical selection–biological response' centered on hydraulic selection, demonstrating that upflow velocity is a key controllable factor for PSB granulation, providing theoretical basis and technical pathway for solving PSB biomass washout and promoting resource-oriented treatment of high-strength organic wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509072
Accurate identification of pollutant emission source parameters is critical for effective pollution response. This study evaluates the performance of genetic algorithm (GA), Nelder-Mead simplex (NM), particle swarm optimization (PSO), and their coupled variants on multi-dimensional, multi-extremum benchmark functions, and develops a source parameter inversion technique integrating PSO-NM with a Gaussian dispersion model. Validation via sulfur hexafluoride (SF6) single-point and multi-point release experiments demonstrates that PSO-NM achieves mean values closest to theoretical optima on Shubert, Hartmann, and Shekel functions, with superior stability and precision. In single-point source experiments, the relative deviation of source strength (Q) inversion ranges from -27.1% to 38.5%, with positional errors below 10 m, indicating robust convergence and repeatability. Multi-point source inversion exhibits stability across two scenarios but with reduced accuracy compared to single-point cases. When source strength is unknown, inversion accuracy for low-release sources (relative deviation 37.3%-70.4%) surpasses that for high-release sources; when position is unknown, positional deviations generally remain below 50 m, with low-release sources yielding better x0 deviations (-1.6 to 8.2 m) but slightly worse y0, z0, and distance parameters. Inversion errors primarily stem from meteorological non-stationarity, inter-source interference, algorithmic local optima, low-concentration measurement noise, and model assumptions. Future improvements may incorporate real-time meteorological correction and source-specific constraints to enhance accuracy and robustness in complex scenarios. The findings provide technical support for precise source tracing, monitoring, and refined management of pollutant emissions at microscale in industrial parks and enterprises.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012804
This study conducted online monitoring of volatile organic compounds (VOCs) at a roadside site on a main arterial road in Haikou, a tropical city, during summer 2023 (June 25–September 30). A total of 56 VOCs were measured. The mean total VOC concentration (φ(TVOCs)) was (9.05 ± 6.24) nmol·mol−1, with concentrations in the order: alkanes > alkenes > aromatic hydrocarbons > alkynes, dominated by light alkanes. Alkenes and aromatic hydrocarbons contributed significantly to atmospheric chemical reactivity, while secondary organic aerosol formation potential (SOAFP) was limited, influenced by both VOC concentrations and temperature. VOC concentrations exhibited a pronounced bimodal diurnal pattern, consistent with traffic peaks. Ratio analysis indicated a Toluene/Benzene (T/B) ratio slightly higher than typical vehicle exhaust values, and an iso-Pentane/n-Pentane (i/n) ratio suggesting fuel evaporation influence. Positive Matrix Factorization (PMF) identified four sources: gasoline/LPG vehicle exhaust (49.9%), solvent use or vehicle evaporation (26.1%), diesel vehicle exhaust (14.9%), and biogenic sources (9.1%). SOAFP was mainly contributed by solvent use/evaporation (35.7%), gasoline/LPG exhaust (34.6%), diesel exhaust (22.0%), and biogenic sources (7.7%). These findings indicate that under tropical summer high-temperature conditions, roadside VOC pollution is predominantly traffic-related, with vehicle evaporation sources non-negligible, providing insights for evaluating vehicular impacts on particulate pollution.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3839-4
Broadband optoelectronic memristors with high computational efficiency and low power consumption are pivotal for neuromorphic computing at the edge. This work presents a Ag/WO3−x:N/ZnO:N/ITO memristor exhibiting dual-modal synaptic plasticity. Electronic synaptic properties emulate biological plasticity, while photoresponse to multiple wavelengths, including simultaneous dual-wavelength stimulation, yields composite photocurrents. Leveraging these characteristics, single- and dual-wavelength artificial vision arrays simulate human visual perception. An artificial neural network integrated with a Field Programmable Gate Array (FPGA) forms a floating-point arithmetic system for object detection. The edge computing system achieves a 103-fold reduction in power consumption, addressing computational power limitations and enabling floating-point operations in embedded neuromorphic deployments. This work advances broadband optoelectronic synapses for efficient, low-power edge computing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202503016
Open-pit coal mining severely damages soil and plant community structure and function, causing soil nutrient loss and ecological degradation. Vegetation reconstruction is a key measure for restoring degraded mining ecosystems, with the core challenge being the selection of suitable plant species and optimization of plant configurations. This study focused on the degraded ecosystem of the Baiyinhua open-pit mine in Inner Mongolia, screening native plant species for vegetation reconstruction experiments to investigate early-stage changes in soil nutrient availability and the underlying microbial mechanisms. Results showed that soil physicochemical properties and fungal community diversity exhibited strong adaptability during early reconstruction. However, soil fungal community composition and the relative abundance of saprotrophic fungi differed significantly among plant configurations. Leymus chinensis significantly increased the proportion of soil saprotrophic fungi from 67.28% in the control to 81.63%, while reducing the relative proportion of pathogenic fungi from 15.63% to 4.33%, demonstrating its potential to enhance soil health. Medicago rivularis improved soil microbial community composition and increased soil available phosphorus content, highlighting its capacity as an excellent pioneer species for optimizing soil nutrient availability. Furthermore, mixed sowing of grasses and legumes showed potential to enhance the nitrogen-fixing effect of legumes. Given the significant positive correlation between soil fungal community composition and total nitrogen and available nitrogen, the effects of different plant configurations on soil nutrient availability and biological health likely stem largely from the regulation of soil fungal community composition. In conclusion, achieving the goal of selecting optimal plant configurations still requires long-term continuous observation and analysis, particularly for optimizing configurations between high-quality grasses like Leymus chinensis and legumes.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607014
Reducing ammonia emissions and recovering lost nitrogen are critical for enhancing nitrogen content in compost. Biological trickling filters, as end-of-pipe odor control, retain ammonia nitrogen in effluent, offering a reuse pathway. However, the impact of nitrogen-rich wastewater reuse within the optimal C/N range (20.0:1–30.0:1) remains unclear. This study composted biogas residue, sawdust, food waste, and mushroom residue, setting initial C/N as the control variable. Four groups were established: low C/N with nitrogen-rich wastewater (LRN), low C/N with deionized water (LRW), high C/N with nitrogen-rich wastewater (HRN), and high C/N with deionized water (HRW). Simulated wastewater (2000 mg/L NH4+-N and 2000 mg/L NO2−-N) was recycled. Results showed no inhibition of final maturity; pH (8.17–8.48) and seed germination index (GI) (90.85%–122.96%) met organic fertilizer standards. HRN reduced cumulative total greenhouse gases, N2O, and NH3 by 20.32%–30.35%, 0.67%–53.38%, and 52.14%–62.15% compared to LRN and LRW. Although HRN emissions were slightly higher than HRW (total GHGs +4.56%, NH3 +4.99%), HRN final nitrogen content (4691.27 mg/kg) exceeded HRW (4514.96 mg/kg), attributed to sufficient carbon enhancing microbial assimilation. Conversely, low C/N with nitrogen-rich wastewater increased NH3 and N2O emissions (LRN vs LRW: +26.43% and +112.99%) due to carbon limitation. Thus, high initial C/N with nitrogen-rich wastewater reuse effectively reduces gaseous nitrogen loss and greenhouse gas emissions while maintaining compost maturity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3946-2
High energy-density lithium–sulfur (Li–S) batteries with rapid intermediate conversion and forbidden shuttle effect require superior electrocatalysts with tunable catalytic activity. In this protocol, binary FeNi3 alloy nanoparticles homogeneously embedded within carbon nanosheets (FeNi3/CNS) are synthesized to regulate the conversions of sulfur species. Time of flight-secondary mass ion spectroscopy reveals a significantly improved catalytic effect of binary FeNi3 alloy compared to bare Ni, which is confirmed by a larger Li2S amount generated during in situ X-ray diffraction measurement. Further anode characterization validates efficient shuttling suppression and good lithium metal protection. In Li–S batteries, electrochemical tests demonstrate a remarkable rate capability of 852 mAh g−1 at 3.0 C, and outstanding long-term cycle at 1.0 C (639 mAh g−1 after 500 cycles). Even under a wide operation temperature range (−15–60 °C), Li–S batteries exhibit stable cycling with high specific capacities under high current rates. Moreover, Li–S batteries using FeNi3/CNS attain a maximum areal capacity of 5.60 mAh cm−2 under ~4.0 mg cm−2 sulfur. This study highlights the advantages of adopting binary or multi-component metal alloys as electrocatalysts and points out the research directions to advance Li–S batteries into practical applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511054
A novel S-scheme heterojunction photocatalyst, Bi6O5(OH)3(NO3)5·3H2O/BiOBr0.8I0.2 (BON@BI), was synthesized via a one-step hydrothermal method using Bi6O5(OH)3(NO3)5·3H2O (BON), KBr, and KI as precursors. The mass ratio of BON to BiOBr0.8I0.2 (BI) was optimized, revealing that the 20% BON@BI composite (BON@BIOPT) exhibited the highest visible-light photocatalytic activity. Under 30 min of visible-light irradiation, BON@BIOPT achieved a 99.8% degradation efficiency of Rhodamine B (RhB), approximately twice that of pristine BI (52.2%). The composite displayed a rod-like morphology with uniform nanosheets, and its specific surface area increased from 32.54 m²·g⁻¹ (BI) to 44.7 m²·g⁻¹. The absorption edge red-shifted from 560 nm (BI) to 580 nm, narrowing the bandgap from 2.55 eV to 2.43 eV. The S-scheme heterojunction formed between BON and BI generates an internal electric field that effectively suppresses recombination of strongly reducing photogenerated electrons and strongly oxidizing holes, with superoxide radicals (O₂•⁻) and holes (h⁺) identified as the primary reactive species. BON@BIOPT exhibited excellent stability, retaining 88.6% degradation efficiency after seven consecutive cycles. It also demonstrated robust environmental adaptability, maintaining 85–98% degradation efficiency under various pH conditions and in the presence of interfering anions. The degradation pathway of RhB involves N-de-ethylation, cleavage of the conjugated chromophore, and deamination, ultimately mineralizing into low-molecular-weight organics, inorganic salts, CO₂, and H₂O. These results underscore the potential of BON@BIOPT for practical remediation of organic pollutants in water.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3551-5
Flexible photonic crystal (PC) materials exhibit exceptional optical properties but suffer structural degradation under repeated mechanical stress, leading to photonic band gap impairment and limited sustainability. This study introduces a self-healing thermoplastic polyurethane (STPU) with an inverse-opal PC structure, inspired by natural structural coloration and self-healing mechanisms. Synergistic dynamic covalent disulfide bonds and hydrogen bonds enable reversible mechanical adjustment, yielding a tensile strength of 26.76 MPa and elongation at break of 2000%. The inverse opal structure facilitates reversible color transitions in response to solvents (water, ethanol) and mechanical strain (0–70%) via lattice spacing modulation. Incorporating an interpenetrating network of polyacrylamide hydrogel and carbon nanotubes enhances strain sensitivity and structural color stability. The material demonstrates broad potential in flexible sensors, adaptive optical devices, bioinspired robotic skins, and dynamic anti-counterfeiting encryption, overcoming traditional PC limitations such as high fragility and single functionality. This strategy advances durable intelligent sensing materials with enhanced environmental adaptability and multifunctional integration.