SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4448-y
Zero-dimensional (0D) hybrid metal halides are promising for optoelectronic displays, bioimaging, and anti-counterfeiting due to strong exciton localization and self-trapped exciton (STE) emission. However, low-toxicity, biocompatible zinc halides with blue emission remain scarce, hindered by structural isolation of [ZnBr4]2− tetrahedra, electron-phonon coupling, lattice distortion, and nonradiative relaxation. Here, we synthesize MPAZnBr4 (MPA = N-(3-aminopropyl) morpholine), a 0D zinc bromide halide. Single-crystal X-ray diffraction reveals a monoclinic P21/c space group with a = 6.65190 Å, b = 16.11210 Å, c = 13.79640 Å, β = 94.5700°, Z = 4, and a calculated density of 2.394 g/cm3. The isolated [ZnBr4]2− tetrahedra are hydrogen-bonded to MPA cations, with the shortest Br···Br contact of 4.76 Å indicating weak inter-cluster electronic coupling. Upon photoexcitation, MPAZnBr4 exhibits bright blue emission centered at 450 nm with a full width at half maximum of 135 nm. Wavelength-dependent emission mapping confirms a single radiative pathway, while temperature-dependent photoluminescence identifies triplet STE emission with a thermal quenching activation energy of 55 meV. The extensive hydrogen-bonding network imparts remarkable structural stability, showing negligible photoluminescence decay under prolonged excitation or storage. As a proof-of-concept, we demonstrate switchable and rewritable information encryption and decryption, enabling complex luminescent patterns. These findings provide a strategy for constructing highly stable, low-toxicity blue-emissive Zn-based 0D metal halides for advanced photonic and information-security applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4165-1
Developing efficient photocatalysts for hydrogen peroxide (H2O2) synthesis is vital for sustainable chemistry, yet optimizing the electronic structure of triazine-based covalent organic frameworks (COFs) through precise spatial engineering remains a challenge. In this work, we constructed four model COFs to systematically decode how the spatial arrangement and incorporation level of triazine moieties regulate the electronic structures and H2O2 production efficiency. Combined experimental and theoretical analyses revealed that FB-AT achieved an optimal donor-acceptor architecture via rational spatial arrangement of triazine and benzene moieties. This configuration established an intramolecular potential gradient, which not only promoted charge separation by suppressing the exciton binding energy but also enriched the electron density at triazine sites. These electron-rich active centers significantly facilitated the oxygen reduction reaction by lowering the thermodynamic energy barrier for *OOH intermediate formation. Consequently, FB-AT exhibited a remarkable H2O2 production rate of 11055 μmol g-1 h-1 in pure water, along with a superior solar-to-chemical conversion efficiency of 1.16%. Additionally, FB-AT enabled complete degradation of phenol, tetracycline, and rhodamine B within 5–15 min of visible light irradiation. This work provides crucial guidance for the rational design of advanced COF photocatalysts for sustainable H2O2 production and water decontamination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4255-5
Localized overheating in high-rate lithium-ion batteries (LIBs) or lithium metal batteries (LMBs) accelerates dendrite formation, disrupting current density and thermal distribution uniformity. This study constructs a Janus-structured, polybenzimidazole (PBI)-welded separator (JNS@PBI) with polypropylene nanofibers (PPNFs) on one face and nanoscale carbon black-modified PPNFs (CPPNFs) on the other. The CPPNFs layer provides electronic conductivity to homogenize interfacial current distribution and heat dissipation, while the PPNFs layer ensures electronic insulation. PBI, serving as a welding agent with intrinsic ionic conductivity, enhances mechanical properties and lithium-ion transport. This design enables synergistic transport of ions and electrons at the JNS@PBI/SEI interface. Density functional theory (DFT) calculations elucidate how JNS@PBI enhances interfacial ion transport and regulates lithium deposition. JNS@PBI exhibits high porosity (71.3%), superior electrolyte uptake (451%), and high ionic conductivity (1.80 mS cm−1). Electrochemical tests confirm exceptional interfacial stability, with stable polarization voltage over 2000 h of plating/stripping cycles. Remarkable rate capability and cycling endurance are observed: high-capacity retention rates of 85.2% after 700 cycles at 1 C and 90.3% after 1500 cycles at 3 C in assembled LiFePO4/graphite full cells. This work provides a promising approach for next-generation separators for high-safety LIBs or LMBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3648-2
Transient energy storage devices represent an emerging class of biodegradable power systems that provide temporary energy for implantable medical electronics before safely degrading in vivo. From early transient primary batteries to contemporary rechargeable batteries integrated with wireless charging systems, these devices have evolved to enable stable prolonged power supply. Through rational transient design and structural engineering, they achieve desirable electrochemical performance, tunable degradation rates, and mechanical compatibility with soft, irregular, and dynamic biological tissues. This work provides a critical review of state-of-the-art transient energy storage devices, including transient primary batteries, transient secondary batteries, and transient supercapacitors, with emphasis on their electrodes, electrolytes, encapsulation materials, fabrication processes, and applications. We critically analyze material selection strategies, transient design principles, and architecture design for various transient batteries and capacitors. Finally, we discuss existing challenges and outline future directions to guide the clinical translation of biodegradable power solutions for biomedical implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3610-7
Electrochemical CO2 reduction reaction (CO2RR) offers an attractive route to produce value-added multicarbon (C2+) products, yet suffers from competing hydrogen evolution and monocarbon production. Here, we propose a dual-confinement effect on CO2 reactant and *CO intermediate, induced by tuning the pore configuration of reconstructed covalent organic frameworks (RC-COFs). The highly crystalline microporous RC-COF-1, when coated on a Cu electrode, enhances local CO2 concentration and restricts CO diffusion, thereby promoting C-C coupling. In acidic electrolyte, the RC-COF-1@Cu electrode achieves a maximum C2+ Faradaic efficiency (FE) of 67.0% at 500 mA cm−2, while maintaining a total carbon product FE above 90% across a broad current density range (100–500 mA cm−2). Experimental and theoretical analyses confirm that the ordered micropores of RC-COF-1 modulate reactant adsorption and intermediate diffusion, leading to improved C2+ selectivity. This work underscores the critical role of COF pore architecture in microenvironment engineering for heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3671-0
Photothermal therapy (PTT) is a non-invasive tumor treatment that offers controllability, non-drug resistance, and precise ablation, yet its efficacy is limited by uncontrolled heat diffusion and weak immune responses, often leading to metastasis. Here, we report a chondroitin sulfate-modified Prussian blue-montmorillonite immunoregulator (PM@CS) that integrates tumor cell adhesion and Golgi targeting to confine photothermal damage at the organelle level. PM@CS accumulates on the Golgi apparatus, reducing heat transfer distance and enhancing photothermal ablation. This targeted hyperthermia disrupts post-translational modification and secretion of metastasis-associated proteins, with GOLPH3 and GOLM1 expression reduced by 63.4% and 70.3%, respectively. Furthermore, PM@CS promotes dendritic cell maturation (3.3-fold increase in CD80+ and CD86+ populations) and enhances antigen-specific CD4+ and CD8+ T cell proliferation, attributed to the immunoadjuvant properties of montmorillonite. Notably, PM@CS upregulates voltage-gated calcium channels (CaV) and enhances Ca2+ influx, activating calcium signaling cascades that amplify immunotherapy. This synergistic approach inhibits primary tumor growth and lung metastasis, offering a promising strategy for cancer treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3764-5
Rechargeable lithium-ion batteries (LIBs) are ubiquitous in portable electronics and electric vehicles, yet their flammable liquid electrolytes pose safety hazards and limit energy density. All-solid-state batteries (ASSBs) with solid-state electrolytes (SSEs) offer enhanced safety and higher energy density. Among SSEs, metal chloride SSEs (Li aMCl b, M = In, Y, Er) combine high ionic conductivity, mechanical deformability, and compatibility with high-voltage cathodes. However, their ionic conductivity and anode stability require improvement. Here, we introduce pentavalent Ta5+ doping into Li3InCl6 (LIC) to engineer Li+ vacancies via charge compensation, yielding Li3−2xIn1−xTaxCl6 (LITxC, 0 ≤ x ≤ 0.6). Ta5+ incorporation efficiently increases Li+ vacancy content without disrupting the cubic close packing (ccp) structure. The optimized composition, Li2.4In0.7Ta0.3Cl6 (LIT0.3C), achieves an ionic conductivity of 2.19 mS cm−1 at 30 °C and a low activation energy of 0.273 eV, balancing vacancy concentration and Li+ content. Ta5+ doping also enhances kinetic stability against the anode. ASSBs with LIT0.3C demonstrate excellent cycling stability: Ni90 cathodes retain 72.3% capacity after 1000 cycles at 0.5 C, while NCM523 cathodes retain 84.1% after 500 cycles at 0.2 C and 80.7% after 1000 cycles. These results highlight a practical strategy for improving chloride SSE performance, offering new insights for high-performance ASSB design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3807-8
Electrocatalytic co-reduction of CO2 and nitrate offers a sustainable route for urea synthesis, valorizing nitrogenous waste and CO2. However, achieving high-performance urea electrosynthesis under ambient conditions remains challenging due to the need for simultaneous activation of CO2 and efficient H2O dissociation to supply active *H for *NOx hydrogenation, ultimately forming key C- and N-containing intermediates for C–N coupling. Here, we report a bifunctional Pd-single-atom-modified Cu (Pd1Cu) nanorod catalyst that synergistically promotes adsorption and stepwise activation of CO2 and H2O, steering the reaction pathway toward selective urea synthesis. Integrating experimental evidence, in situ spectroscopy, and computational analyses, we disclose that atomically dispersed Pd sites kinetically favor co-generation of *CO and *NH2 via H2O dissociation-driven proton transfer, forming an optimal intermediate balance. The dual metal active sites enhance C–N coupling via combined electronic and geometric effects, substantially lowering the reaction energy barrier and improving selectivity. This work provides a rational design strategy for advanced multifunctional catalysts for urea electrosynthesis, contributing to carbon neutrality and waste nitrogen valorization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3815-0
The development of bifunctional electrocatalysts capable of integrating biomass-derived platform molecule oxidation with organic reduction offers a promising strategy for simultaneously enhancing energy efficiency and generating high-value chemicals. However, designing catalysts that exhibit both high activity and stability in integrated systems remains a significant challenge. Herein, we report a self-supported electrode composed of nitrogen-doped carbonized wood (NCW) supported NiCo nanosheets (NiCo 0.3/NCW) that enables the electrocatalytic 5-hydroxymethylfurfural oxidation to produce 2,5-furandicarboxylic acid (FDCA) and the nitrobenzene reduction to yield aniline in an integrated electrochemical cell. The NiCo 0.3/NCW electrode achieves the production of FDCA and aniline at a low cell voltage of 1.7 V, with ~99% anodic and ~92% cathodic Faradaic efficiencies, respectively. Experimental characterizations disclose that the hierarchical porous NCW architecture promotes the dispersion of active sites, while nitrogen doping strengthens metal–support interactions. In-situ spectroscopic experiments combined with density functional theory (DFT) calculations reveal that cobalt incorporation tunes the electronic structure of nickel, thus optimizing substrate and intermediate adsorption, and lowering energy barriers. These effects ultimately enhance the performance of the natural wood-derived catalyst in integrated biomass valorization and selective organic electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3777-0
Optically clear adhesives (OCAs) are critical for next-generation optoelectronic systems, yet their end-of-life management remains a sustainability challenge. Here, we report a debondable and robust polyurethane (PU)-based OCA that integrates both mechanical and chemical recyclability. The PU-based OCA exhibits high optical transparency (>90% transmittance from visible to near-infrared), strong adhesion to glass and polymeric substrates (bonding strength up to 5.0 MPa), and thermally sensitive H-bonding interactions that enable on-demand deadhesion at elevated temperatures. This capability facilitates non-destructive detachment of functional assemblies, promoting component reuse and material recycling. The adhesive demonstrates excellent mechanical properties, including ductility and strength, and outperforms several commercial optical adhesives in key performance metrics. Its straightforward synthesis and industrial scalability make it a promising solution for advancing circular economy principles in optoelectronic device manufacturing. The work addresses critical bottlenecks in balancing mechanical performance, adhesion/detachment, and recyclability, offering a transformative approach to sustainable advanced manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3689-9
Converting body heat into electricity presents an appealing route for sustainably powering wearable electronics; however, conventional thermoelectric materials face significant drawbacks, including high ionic concentrations, toxicity, and limited thermoelectric efficiency. Here, we report an ionic thermoelectric hydrogel designed through precise supramolecular chemistry, utilizing dual molecular interactions: host-guest complexation of α-cyclodextrin (α-CD) with I3− ions and hydrogen bonding between polyvinyl alcohol (PVA) polymer chains and I3−. This molecularly tailored approach markedly amplifies thermoelectric performance, achieving a high thermopower of 2.21 mV/K and a tenfold enhancement in peak power output at an exceptionally low iodine concentration (10 mmol/L I− + 2.5 mmol/L I3−). The hydrogel maintains excellent biocompatibility and mechanical robustness, suitable for direct skin contact. Demonstrated applications include flexible thermoelectric devices generating nearly 100 mV from body heat and sensor arrays capable of motion and spatial temperature sensing. These results underscore the substantial potential of supramolecularly designed ionic thermoelectric hydrogels for wearable energy harvesting, personalized healthcare monitoring, and advanced human-computer interfaces.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60607-4
The methanation of biomass gasification syngas (H2/CO = 3:1) was investigated over Ni/Al2O3 monolithic catalysts supported on cordierite, with a nominal Ni loading of 15 wt%. Catalysts were modified by treatment with 10% NaOH solution for 1 h and 2 h. Physicochemical properties were characterized by BET, TEM, H2-TPR, XRD, CO2-TPD, and TG. Results showed that the 2 h modification (15%Ni/Al2O3-2h) increased specific surface area, enhanced catalytic activity, and increased alkaline site density compared to the unmodified catalyst. Under optimized conditions (H2/CO volume ratio 3:1, space velocity 10000 mL/(g·h), temperature 400 °C), the 15%Ni/Al2O3-2h catalyst achieved a CO conversion of 97% and CH4 selectivity of 100%. Stability tests over 2 h showed that the CO conversion remained stable at approximately 98%, indicating excellent catalytic stability. The study demonstrates that alkali modification with 10% NaOH for 2 h significantly improves both the methanation performance and stability of Ni/Al2O3 monolithic catalysts, offering a promising route for synthetic natural gas production from biomass.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604025
To meet the minute-level early-warning requirements for odor and multi-pollutant emissions at waste treatment facilities, this study proposed a multivariate short-term time-series prediction framework applicable to multi-tier scenarios covering source and boundary points (i.e., workshops and plant boundaries). Based on continuous online monitoring data with a 5-second resolution, a long short-term memory (LSTM) model using a sliding-window and recursive multi-step prediction strategy was constructed to jointly model odor concentration (OU) and pollutants including VOCs, NH3, H2S, and CH3SH (mg/m³). An evaluation protocol aligned with environmental supervision practice was established, incorporating mean absolute error (MAE), root mean square error (RMSE), goodness-of-fit (R²), skill scores (SS) relative to a persistence baseline, and threshold-based error stratification to characterize uncertainty during peak emission periods. The results showed that at workshop monitoring sites with relatively stable operating conditions, VOCs, NH3, H2S, and CH3SH exhibited a high goodness of fit and low prediction errors. In contrast, at boundary sites affected by plume arrival delays and diffusion-dilution non-stationarity, OU and VOCs displayed significantly amplified errors during peak episodes, and the skill score advantage over the baseline became unstable at certain sites. Stratified analysis consistently revealed that non-peak periods outperformed peak periods, indicating that event-driven fluctuations were the main sources of error. Accordingly, this study suggested incorporating exogenous variables such as wind speed and direction, ventilation and gate access control, and operational rhythms, along with peak-sensitive loss functions, into the model to enhance its capacity to characterize and provide early warnings for transient emission pulses. Overall, this study established a reusable methodological baseline and evaluation paradigm for minute-scale multi-pollutant prediction, providing quantitative support for the operational management and source-to-boundary coordinated control of waste treatment facilities.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225200
Phosphogypsum, a by-product of wet-process phosphoric acid production, poses severe environmental and safety challenges due to its massive annual output and stockpiling. This study addresses the urgent need for resource utilization by employing phosphogypsum as the primary raw material, supplemented with ground granulated blast furnace slag, fly ash, and type II anhydrite. Two foaming agents, sodium bicarbonate (NaHCO3) and aluminum powder, were used to regulate pore structure, and their effects on ceramsite performance were compared. Under identical preparation conditions, aluminum powder yielded higher 7-day cylinder compressive strength than NaHCO3. Optimal formulations achieved a maximum cylinder compressive strength of 6.5 MPa with a bulk density of 1020 kg/m3, meeting lightweight aggregate concrete strength requirements. Aluminum powder produced closed pores, reducing bulk density to as low as 765 kg/m3, while NaHCO3 generated interconnected pores leading to higher water absorption. XRD, SEM, and BET analyses revealed that strength-contributing phases are calcium silicate hydrate and calcium aluminate hydrate; trace heavy metals (Mo, Ti) hinder their formation, causing structural defects. This work demonstrates a green, non-fired route for phosphogypsum valorization, offering environmental and economic benefits and a pathway for large-scale utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3595-7
Cu(I) complexes exhibiting thermally activated delayed fluorescence (TADF) have emerged as promising alternatives to noble-metal-based emitters for organic light-emitting diodes (OLEDs). However, the development of red-emitting Cu(I) complexes has been hindered by slow radiative decay and fast nonradiative decay. In this study, a linear two-coordinate Cu(I) complex, ICuTMC, was designed and synthesized. By pairing a pyrazine-fused N-heterocyclic carbene and a tetra-methylcarbazolyl ligand, a strong ligand-to-ligand charge transfer excited state is generated. Single-crystal structure authenticates close intramolecular C–H···Cu contacts, providing good steric shielding to the metal center. C–H···π interactions between ligands are also revealed. The complex exhibits highly efficient red TADF with emission maximum at 622 nm, photoluminescence quantum yield of 76%, and short delayed fluorescence lifetime of 0.24 μs. This is enabled by a large oscillator strength from the coplanar donor-Cu-acceptor conformation, a small singlet-triplet energy gap from spatial separation of frontier molecular orbitals, and strong spin-orbit coupling from the metal center. Vacuum-deposited OLEDs based on ICuTMC achieve a peak external quantum efficiency of 25.9% and a significantly small roll-off of 1.9% at 10,000 cd m−2. These performances demonstrate a way to overcome the energy gap law for linear coinage metal complexes toward red OLEDs.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61094-3
Aqueous zinc-iodine (Zn-I2) batteries are promising for large-scale energy storage due to their intrinsic safety, low cost, and high theoretical capacity (211 mAh g−1 for iodine). However, their practical application is hindered by the poor electronic conductivity of iodine, sluggish redox kinetics, and the shuttle effect of polyiodides. This review systematically analyzes the reaction mechanisms of iodine cathodes, including two-electron (I−/I2) and multi-electron (I−/I2/I+ and I−/I2/I+/IO3−) pathways, and identifies key bottlenecks. It then comprehensively summarizes recent advances in iodine host materials, categorized into three strategies: physical confinement, chemical adsorption, and electrocatalysis. Representative host materials such as porous carbons, covalent organic frameworks (COFs), porous aromatic frameworks (PAFs), polymers, MXenes, and Prussian blue analogs (PBAs) are discussed, with emphasis on the structure–performance relationships. The review highlights that heteroatom doping (e.g., nitrogen) enhances chemical adsorption of iodine species, while single-atom catalysts (e.g., Co, Zn) provide electrocatalytic sites that accelerate conversion kinetics. Finally, future research directions are proposed, including exploration of multi-electron systems, mechanistic elucidation of iodine conversion, development of advanced host materials, and optimization of zinc anodes, to accelerate the commercialization of Zn-I2 batteries.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61113-4
Porous pyrolytic carbon (PPyC) serves as the buffer layer in TRi-structural ISOtropic (TRISO) fuel particles, providing storage for fission gases, preventing damage to outer layers, and absorbing stresses caused by fuel-kernel swelling. However, the changes of PPyC micro- and meso-structure at high temperatures remain insufficiently understood. In this study, PPyC fabricated by chemical vapor deposition was heat-treated from 1200 to 1600 °C and characterized across atomic-to-mesoscopic scales. Results show that the structure changes with temperature with a transition at approximately 1400 °C. Below 1400 °C, a decrease in Raman ID/IG ratio, narrowing of the graphite diffraction peak, and increased sp2 hybridization indicate progressive ordering associated with defect redistribution. Concurrent decreases in true density and mesopore volume, together with increased closed porosity, are consistent with partial conversion of open pores into closed pores. Above 1400 °C, increased ID/IG ratio, broadening of the diffraction peak near the rhombohedral graphite (101) reflection, and transition regions between crystalline and amorphous material observed by TEM indicate increasing structural disorder. Meanwhile, initially distinct PPyC particle boundaries blur and merge into broad, plate-like domains. Subsequent decrease in closed porosity and increase in mesopore surface area are consistent with partial connection of closed pores to the open-pore network. This work shows that intrinsic coupling between atomic-scale structural change and mesoscale pore connectivity provides a basis for assessing high-temperature structural stability of PPyC in TRISO fuel particles.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61108-0
Adipic acid is a key monomer for nylon-6,6 and nylon-6, yet its industrial production via nitric acid oxidation of KA oil suffers from high energy consumption and N2O emissions. This study reports a green catalytic system for one-pot oxidation of cyclohexane to adipic acid using a Cu/Cu2O@C composite catalyst derived from wood chips. During pyrolysis, wood chips serve as both carbon support precursor and in-situ reducing agent, converting Cu2+ into Cu/Cu2O active species. The abundant defects in biomass carbon form strong coordination interactions with copper, regulating the electronic distribution of active sites and enhancing catalytic performance. Under optimized conditions (100 °C, 12 h), the Cu/[email protected] catalyst achieves a cyclohexane conversion of 19.36% and an adipic acid selectivity of 73.28%. Mechanistic studies reveal that the electronic interaction between the carbon support and copper species strengthens adsorption of cyclohexanone, promoting selective formation of adipic acid. The reaction follows a free radical chain mechanism involving hydroxyl and alkyl radicals. This work provides a viable strategy for developing eco-friendly, low-cost, and high-efficiency catalytic materials for industrial adipic acid synthesis.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3830-6
Controlled fabrication of artificial multiple-stranded helices is central to deciphering chirality complexity and hierarchical self-assembly processes. Inspired by biological helical nanostructures, we designed a twisted figure-of-eight chiral macrocycle (M1) from pyrene and benzene diimide subcomponents to direct hierarchical assembly of double- and quadruple-stranded superhelices. Single-crystal X-ray diffraction reveals that M1 undergoes charge-transfer and CH···π interactions-driven helical wrapping, forming right-handed (P) single strands that intertwine into quadruple π-helical superstructures. Crucially, the macrocycle's adaptive cavity and interstitial voids could bind electron-deficient naphthalene diimide (NDI) guests through charge transfer interactions, triggering transformation to left-handed (M) double helices. This structural shift induces helicity inversion and optical anisotropy changes, demonstrating a rare case of crystalline-state multiple-helix conversion with supramolecular chirality inversion. This work establishes a template-free methodology for synthesizing multiple-stranded π-helices and controlling their transformations through supramolecular engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3897-6
Decoding the nature of catalytically active sites is an essential prerequisite for the rational design of catalysts for electrochemical H2O2 synthesis, but faces significant challenges, particularly for controversial cobalt single-atom catalysts (Co SACs). Herein, we report trace Co single-atom sites embedded within pyridinic N-rich carbon nanospheres (Co1-NNH3-C), synthesized via a self-assembly coupled surface-coating strategy. The Co1-NNH3-C catalyst demonstrates remarkable H2O2 selectivity (99%) and activity at current density of −3.5 mA cm−2 in 0.1 M H2SO4. Through a combined approach of molecular probe experiments, surface modification, and density functional theory (DFT) calculations, we disclose that pyridinic N, rather than Co single atoms, serves as the direct active site for 2e− oxygen reduction reaction (ORR). The trace Co (0.05 wt%) indirectly facilitated pyridinic N formation during pyrolysis but exhibits negligible direct catalytic involvement. DFT reveals pyridinic N sites optimize OOH intermediate adsorption (ΔG*OOH = 4.0 eV) and minimize reaction overpotential of 0.20 V, enabling scalable H2O2 production (907.5 mmol gcat−1 h−1). This work redefines the role of trace metal in SACs, providing a paradigm for designing metal-induced carbon catalysts for sustainable electrosynthesis for H2O2.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3833-1
Developing plasmonic nanomaterials with compositions beyond noble metals is crucial for expanding their applications. Transition metal nitrides, such as titanium nitride (TiN), exhibit excellent plasmonic optical properties and photothermal conversion efficiency, showing promise in catalysis, photothermal therapy, and seawater desalination. However, the structure-property relationship governing their plasmonic optical properties remains unclear. Here, we constructed Au@TiN core-shell nanostructures and systematically investigated the tunability of their geometry, composition, and optical properties. By varying the Au core size and TiN shell thickness, we achieved precise control over the localized surface plasmon resonance (LSPR) from visible to near-infrared wavelengths. Single-particle scattering spectroscopy revealed distinct plasmon hybridization modes, with experimental spectra matching theoretical simulations. The Au@TiN nanostructures exhibited enhanced photothermal conversion efficiency (η = 78.5%) under 808 nm laser irradiation, significantly outperforming pure TiN nanoparticles (η = 45.2%). This work demonstrates multi-factor control over plasmonic effects in TiN, providing insights for designing TiN-based plasmonic nanomaterials for catalysis and sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3742-5
Nematic liquid crystal elastomers (NLCEs) exhibit excellent mechanical properties and diverse deformation modes, while cholesteric liquid crystal elastomers (CLCEs) as photonic crystals (PCs) possess superior optical performance and intelligent response characteristics. Combining these two elastomers into a monolithic material is a challenging yet promising endeavor. Here, we designed and synthesized a new diselenide-bonded molecule (DSeAc), whose lower bond energy between selenium atoms endows it with excellent bond exchange ability. Consequently, two LCE matrices containing DSeAc molecules can achieve seamless bonding under mild conditions via dynamic diselenide bond exchange. By integrating a CLCE film and an NLCE actuator into a monolithic film, we enable the integration of two functional components, whose functional characteristics can be tailored as required. This function block combination strategy offers a promising pathway for developing smart materials with complex functions, showing great potential in information storage, anti-counterfeiting, and biomimetics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60649-4
To achieve efficient conversion of lignin-derived phenolic compounds into high-value hydrocarbon fuels, a series of NiCo bimetallic catalysts with N-doped biochar and Al2O3 composite supports (NiCo/NC-Al2O3) were designed and synthesized. Comprehensive characterizations (XRD, TEM, XPS, H2-TPD) revealed the superior catalytic activity in the hydrodeoxygenation (HDO) of lignin-derived phenolic compounds. The optimized Ni8Co2/NC-Al2O3 catalyst exhibited good metal dispersion and excellent hydrogen dissociation adsorption capacity. Under mild reaction conditions (240°C, 1 MPa H2, 4 h), it achieved complete conversion of guaiacol and 99.9% selectivity to cyclohexane, significantly outperforming monometallic Ni10/NC-Al2O3 and Co10/NC-Al2O3 catalysts. Comparative studies indicated a synergistic effect between Ni and Co, where the introduction of Co effectively promoted aromatic ring hydrogenation and C−O bond cleavage. The catalyst maintained high activity after four reuse cycles, demonstrating outstanding structural stability. This study elucidates the regulatory mechanism of the Ni-Co synergistic effect on catalytic performance, providing new insights for the development of efficient non-noble metal HDO catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025092801
Urban river water quality is critically influenced by outfall discharges, yet the seasonal dynamics of dissolved organic matter (DOM) and its linkage to water quality remain poorly constrained. This study collected outfall water samples seasonally during 2023–2024 along the Nanfei River and Banqiao River in Hefei, Anhui Province. Parallel factor analysis of excitation-emission matrices identified three fluorescent components: fulvic acid-like C1, tryptophan-like (protein-like) C2, and terrestrial humic-like C3. Seasonal variations were pronounced: protein-like C2 dominated in winter and spring, whereas summer and autumn showed lower C2 proportions due to rainwater dilution and urban nonpoint source runoff inputs. Water quality indices decreased in summer and autumn, primarily attributed to dilution by rainfall runoff. Fluorescence index (FI > 1.9) and biological index (BIX > 1.0) indicated predominantly autochthonous DOM sources. During summer and autumn, humification index (HIX) and specific UV absorbance (SUVA) increased, while spectral slope ratio (SR) decreased, suggesting enhanced terrestrial and urban runoff influence. Significant positive correlations were observed between protein-like C2 and terrestrial humic-like C3 with water quality parameters, indicating their utility as precise indicators of pollution sources and seasonal water quality variations. These findings provide a scientific basis for integrated management of urban outfalls.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3963-5
Metal additive manufacturing (MAM) enables integrated one-piece fabrication of parts, high material utilization efficiency, and unparalleled design freedom. However, problems such as low production efficiency, difficulties in ensuring quality stability and defect control limit the large-scale industrial application of AM. In-situ active modulation for AM enables dynamic regulation of parts during the fabrication process, thereby enhancing the quality of the final fabricated parts without introducing extra processing steps. In-situ active regulation enables direct intervention during defect nucleation, providing better effectiveness than post-printing repairs while avoiding performance degradation risks associated with post-processing. Based on the difference of core factors directly affected during regulation, in-situ active regulation is categorized into the following. (1) Process and path parameter optimization, where regulation directly impacts manufacturing-related procedural rules. It is the simplest method of control and the preferred approach, with widespread attention focused on its effects on microstructure and mechanical properties. (2) Laser beam shaping, where regulation directly influences the energy carrier morphology. To address issues such as edge over-melting and localized energy deficiency caused by non-uniform energy distribution, laser beam shaping should be employed. (3) Additional physical field modulation achieved by superimposing supplementary physical fields. When optimal process and path parameters still fail to obtain the desired microstructure and mechanical properties, additional physical field control may be considered. Meanwhile, this work summarized the effects of different additional physical fields on the mechanical properties of various metallic base materials. The future trends of in-situ modulation in additive manufacturing are also discussed.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3820-5
Two novel N-heterocyclic carbene (NHC)-based ligands featuring rigid boron-oxygen (BO) fused-ring units, named Bpmi and Bpmb, and the two corresponding homoleptic meridianal iridium complexes, namely mer-Ir(Bpmi)3 and mer-Ir(Bpmb)3, were designed and synthesized. Single-crystal structures revealed a meridional coordination geometry for both complexes. Shorter Ir–C carbene bond lengths and rigid planar BO-fused ring units contribute to enhanced stability. Both complexes exhibit efficient green phosphorescence (λem = 536/521 nm in toluene, ΦPL > 78%) with short lifetimes (τ = 846/1083 ns), leading to high radiative rate constants (Kr = 10.04 × 10^5 and 7.29 × 10^5 s−1, respectively). Theoretical calculations indicate significantly increased metal-to-ligand charge transfer (MLCT) character (21.69% for mer-Ir(Bpmi)3; 17.30% for mer-Ir(Bpmb)3) compared to reference complexes (13.01% for mer-Ir(pmi)3; 15.99% for mer-Ir(pmb)3). Both complexes exhibit exceptional thermal stability with decomposition temperatures of 491°C (mer-Ir(Bpmi)3) and 540°C (mer-Ir(Bpmb)3). OLED devices using mer-Ir(Bpmb)3 and mer-Ir(Bpmi)3 as emitters demonstrate maximum external quantum efficiencies of 20.0% and 15.6%, respectively. This research pioneers boron-fused ring-containing NHCs and their phosphorescent iridium(III) complexes, establishing a novel design strategy for high-performance NHC-based OLED phosphorescent emitters.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511047
Ultra-high voltage (UHV) transmission lines are critical infrastructure for China's energy strategy. Compared with conventional voltage lines, UHV lines exhibit nonlinear growth in resource and capital consumption, complex supply chains, and strong spatiotemporal heterogeneity in carbon emission factors, resulting in substantial and uncertain construction-phase emissions. Accurate accounting is essential for achieving carbon peaking and carbon neutrality goals in the power sector. To address issues of ambiguous system boundaries, weak characterization of input parameter uncertainty, and poor cross-year applicability of input-output carbon intensities, this study defines the accounting boundary using budget quotas and develops a hybrid life cycle assessment (HLCA) model. For easily traceable emission sources, process-based LCA (PLCA) is applied, with uncertainty analysis via distribution fitting and Monte Carlo simulation. For difficult-to-trace sources, input-output LCA (IO-LCA) is used with carbon intensity correction. A case study of a ±800 kV transmission line yields a construction-phase carbon emission intensity of 1,858.91 t·km⁻¹ (CO₂ equivalent), with a 95% confidence interval of [1,379.73, 2,486.45] t·km⁻¹. Sobol global sensitivity analysis identifies key emission reduction pathways. The method's validity is confirmed by comparison with existing studies, providing quantitative support for low-carbon design, construction optimization, and carbon auditing of UHV projects.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510060
Wastewater treatment plant (WWTP) effluent is a significant pathway for emerging contaminants (ECs) to enter natural water bodies. This study investigated the removal of ECs by two field-scale gravel-based constructed wetlands: a horizontal subsurface flow constructed wetland (QL-CW) and a surface flow constructed wetland (BL-CW), both treating actual WWTP effluent. The influence of operation mode and wetland plant type on EC removal was examined. Using liquid chromatography-mass spectrometry, principal component analysis, and ecological risk assessment, the removal efficiencies and mechanisms for various ECs were explored. In QL-CW, biodegradation was more pronounced, particularly via ammonia-oxidizing bacteria co-metabolism, favoring ECs with benzyl, secondary amine, secondary amide, tertiary amide, halogenated, and carboxyl functional groups. In BL-CW, electrostatic attraction and hydrophobic interactions were more significant, with plant and root-microorganism uptake and adsorption playing key roles. Surface flow mode achieved significantly higher removal of antibiotics (45.3% vs. 34.1%) compared to horizontal subsurface flow, while no significant differences were observed for non-antibiotic pharmaceuticals (66.6% vs. 64.4%) and pesticides (49.8% vs. 34.2%). Planting Cyperus alternifolius (windmill grass) was more beneficial for antibiotic removal (43.6% vs. 30.1%) than planting Ipomoea aquatica (water spinach). The wetlands effectively reduced the ecological risks of most ECs to marginal levels. This study provides insights into the deep treatment of ECs in WWTP effluent by constructed wetlands.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607009
Resource utilization of food waste is a key measure for implementing waste classification and constructing zero-waste cities in China. However, the technical route based on anaerobic digestion currently faces developmental bottlenecks. In this study, engineering-scale facilities located in Northeast, North, Northwest, and Southeast China were selected, and material flow analysis was employed to comprehensively assess the current status of anaerobic digestion of food waste. The results indicated that, during the pretreatment stage, both leachate and organic slurry from all surveyed regions exhibited high COD/TN ratios, and the leachate contained high concentrations of lipids. Following three-phase (oil-water-solid) separation, the oil recovery rate could reach over 98%. Anaerobic digestion of each ton of food waste from the four regions generated approximately 70 to 80 Nm³ of biogas, while simultaneously producing liquid digestate accounting for 69% to 80% of the total mass and solid digestate accounting for 2.7% to 3.6%. However, the annual continuous production of digestate was not aligned with the seasonal demand for land use, thereby restricting the pathway for resource utilization. Converting food waste into an external carbon source can significantly enhance its resource utilization efficiency, with the economic benefits increasing by more than 203% compared to the methanogenesis pathway. The selection of the carbon source production technology route should be comprehensively determined by taking into account factors such as the specific nitrogen removal requirements of the target wastewater treatment process, the quality requirements for the carbon source products, and the substitution rate of commercial carbon sources.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3965-5
Liquid crystal elastomers (LCEs) have emerged as a promising material platform for soft robotics, effectively integrating programmable molecular orientation with the inherent flexibility of elastomers. This unique combination enables significant, reversible deformations responding to external stimuli, including heat, light, electric, and magnetic fields. Due to these characteristics, LCEs serve as an ideal material system for bridging biological principles with engineered soft robotic applications, enabling the development of adaptive and multifunctional systems with enhanced biomimetic capabilities. However, the mechanisms of bioinspired motion and the effective integration of biomimetic functions in LCE-based robots remain insufficiently explored. This review systematically examines recent advances in LCE-based biomimetic soft robots, focusing on multimodal actuation strategies, including contraction, crawling, rolling, jumping, swimming, and plant-inspired motions. It highlights integrated functional enhancements achieved via innovative material compositions, structural designs, and advanced manufacturing techniques. These developments have enabled novel robotic functionalities, including programmable actuation, self-healing and recycling, color morphing and camouflage, and tunable bioinspired surface characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3892-2
Single-atom co-catalysts on semiconductor substrates offer a cost-efficient route to enhance photocatalytic performance with minimal precious metal loading. However, precise tuning of local coordination environments and construction of efficient single-atom co-catalysts remain challenging for overall water splitting. Here, we employ an icing-assisted photochemical reduction strategy to anchor atomically dispersed Pt species as hydrogen evolution co-catalysts on Al3+-doped SrTiO3 (Pt SA-STO). The optimized Pt SA-STO exhibits remarkable activity, with hydrogen and oxygen evolution rates of 13.62 and 6.71 mmol h−1 g−1, respectively, and a turnover frequency (TOF) of 2114.5 h−1. We pioneer the use of nuclear magnetic resonance (NMR) spectroscopy to quantitatively track the temporal evolution of Pt4+ to Pt2+ under continuous irradiation during the icing-assisted photoreduction. Advanced characterizations and theoretical calculations confirm that single-atom Pt co-catalysts facilitate directional transfer and extraction of photogenerated charge carriers, effectively suppressing surface recombination. This work provides insights into designing novel single-atom co-catalysts by deepening understanding of electronic configurations and active sites in photocatalytic overall water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3984-5
Rechargeable aluminum batteries (RABs) are promising for large-scale energy storage due to high theoretical capacity, inherent safety, and abundant aluminum reserves. However, conventional AlCl3-based ionic liquid electrolytes suffer from high cost, uncontrolled dendrite growth, and severe anode corrosion. Here, a molecular-level ligand engineering strategy is proposed, employing nitrogen-containing cyclic amides with tunable N–H functionalities to modulate the coordination environment of deep eutectic electrolytes (DEEs). Combined experimental and theoretical investigations reveal that the α-pyrrolidone-based DEE (PDEE) possesses a wider electrochemical window, higher ionic conductivity, and lower polarization. Precise N–H regulation optimizes cationic ligand and chloroaluminate anion interactions, accelerating ion transport to facilitate uniform Al deposition without dendrites. The amine functionalities enable in situ construction of a uniform inorganic-organic bilayer solid electrolyte interphase, mitigating anode corrosion and enhancing long-term interfacial stability. As a result, Al//Al symmetric batteries with PDEE achieve stable cycling for over 2000 hours, while Al-graphite full batteries demonstrate negligible capacity decay after 6000 cycles. This study establishes that ligand molecular engineering offers an effective strategy for optimizing DEEs, enabling durable and high-performance RABs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012605
Synthetic phenolic antioxidants (SPAs) are widely used, leading to environmental contamination and human exposure. However, studies on their effects on adipocyte differentiation and underlying mechanisms, particularly for emerging SPAs, are limited. This study evaluated the impacts of 4-tert-octylphenol (4-t-OP) and three novel antioxidants (AO 3114, AO 1135, AO 702) on adipogenesis using the mouse 3T3-L1 preadipocyte differentiation model. Lipid staining, triglyceride measurement, differentiation-related gene expression analysis, and transcriptomic approaches were employed. All four SPAs significantly promoted differentiation of 3T3-L1 cells into mature adipocytes and upregulated expression of peroxisome proliferator-activated receptor gamma (Pparγ) and mature adipocyte marker genes. Transcriptomic analysis revealed differential effects on gene transcription during early differentiation. GO and KEGG enrichment analyses indicated that these SPAs promoted adipogenesis by enhancing energy metabolism and protein synthesis, as well as regulating PPAR and other signaling pathways. In conclusion, the tested SPAs promote adipogenesis and disrupt lipid metabolism through distinct mechanisms, suggesting long-term exposure may cause metabolic disorder risks and pose a public health threat.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4030-y
In the era of artificial intelligence, efficient perception and processing of massive visual information demand advanced machine vision systems. Inspired by human visual adaptation, various optoelectronic devices have been developed, yet most rely on external gate voltages or complex circuits for dynamic sensitivity modulation. This work demonstrates an all-optically controlled biomimetic sensor based on a one-dimensional ZnO/MAPbBr3 heterojunction, achieving both positive and negative photoconductivity effects. By modulating oxygen vacancy states with ultraviolet light, the competition between intrinsic photoconduction and trap-mediated carrier capture is regulated, enabling dynamic control of visible-light photoresponse within a single device. This tunable behavior mimics scotopic adaptation (photopigment regeneration under weak illumination), photopic adaptation (photopigment bleaching in bright environments), and eyelid-like self-protection against intense light. The device operates without external gate bias or cascaded circuits, offering a promising strategy for next-generation intelligent biomimetic sensors in machine vision.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60717-7
Alkali lignin, a high-volume byproduct from pulp and paper manufacturing and biomass refining, is a promising feedstock for aromatic hydrocarbon production in liquid fuels due to its high energy density and abundant aromatic moieties. However, its highly cross-linked polymeric structure hinders efficient valorization. This work investigates catalytic conversion of alkali lignin into bio-oil under in situ H2 supply from formic acid. A series of Ni-Mo/h-BN bimetallic catalysts with varied metal ratios were synthesized by impregnation and characterized by XPS, XRD, and other techniques. The effects of reaction parameters on H2 production via aqueous-phase reforming (APR) of formic acid were evaluated. Optimal H2 yield was achieved at a formic acid-to-water molar ratio of 1:10 and a Ni/Mo atomic ratio of 3:1. H2 yield increased monotonically with temperature from 220 to 280 °C, reaching a maximum of 38.48 mmol. Subsequently, influences of reaction temperature and residence time on bio-oil production were examined. The highest heavy bio-oil yield (18.93%) and maximum relative content of aromatic hydrocarbons (13.81%) were both achieved at 280 °C. Prolonged reaction time reduced heavy bio-oil yield and aromatic hydrocarbon abundance while favoring furan derivatives. This work demonstrates good synergy between in situ hydrogen generation from formic acid and lignin hydrogenation in the temperature range 240–280 °C.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3444-0
Birefringence is a critical linear optical parameter governing polarization modulation in birefringent crystals and phase-matching in nonlinear optical (NLO) crystals. Anionic group theory posits that the spatial arrangement of B–O functional motifs in borate frameworks can be tuned via cation modification, enabling the discovery of novel structures and optimized optical properties. Using LiB3O5 as the parent structure, we designed and synthesized two novel borates, Li2Rb2BaB18O30 (LRBBO) and K0.7Rb1.3BaB6O11 (KRBBO), through a dimension-reduction strategy induced by cation substitution. KRBBO features an unprecedented 2∞[B3O5] layered structure and exhibits a significantly enhanced birefringence of Δn = 0.08 at 546 nm, surpassing both the parent compound and other borates containing only [B3O7] groups. This work establishes an effective route for designing short-wavelength borate optical crystals with large birefringence and for enhancing the birefringence of [B3O7]-based NLO crystals to extend deep-ultraviolet phase-matching capabilities. The findings underscore the role of cation modulation in achieving aligned arrangement of anisotropic functional units, offering a viable strategy to overcome the intrinsic limitations of conventional borate NLO materials.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3462-6
Developing efficient hydrogen evolution reaction (HER) electrocatalysts based on earth-abundant elements is critical for advancing sustainable energy technologies. However, existing catalysts suffer from suboptimal Gibbs free energy for hydrogen adsorption (ΔG H*), resulting in significantly lower catalytic performance compared to platinum-based catalysts. In this study, a novel electronegativity modulation strategy was applied to enhance catalytic activity. Inspired by the d-band center (E d) theory, Zn and Mg were introduced into the catalyst system to regulate the electronic structure. The electronegativity difference induced strong local electronic interactions, which effectively tuned the d-band center of Ni active sites and optimized ΔG H*. As a result, the (NiZnMg)MoN catalyst exhibited outstanding HER performance with an overpotential of only 138 mV at 300 mA cm−2, surpassing commercial Pt/C catalysts. This study provides valuable insights into designing efficient doped electrocatalysts based on d-band tuning and electronegativity engineering. The findings offer a promising strategy to overcome performance limitations in HER electrocatalysis and accelerate the practical application of alkaline hydrogen production in sustainable energy systems.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3507-9
Quantum dot (QD)-based memristors enable precise and energy-efficient neuromorphic computing through atomic-level control over electrical synapse performance. However, the stochastic nature of QD structures results in poor reliability of resistive switching, limiting practical applications. This work presents a data-driven QD synthesis optimization loop that integrates high-throughput density functional theory with machine learning to establish a cross-scale screening platform for precise QD synthesis. By minimizing structural disorder through pure phase, uniform size distribution, and highly preferred orientation, QD-based memristors demonstrate a 57% reduction in switching voltage, a two-order-of-magnitude increase in ON/OFF ratio, and endurance and retention degradation as low as 0.1% over 8.4 × 10^7 s of continuous operation and 10^5 rapid read cycles. The dynamic learning range and neuromorphic computing accuracy improve by 477% and 27.8% (reaching 92.23%), respectively. These findings establish a scalable, data-driven strategy for rational design of QD-based memristors, advancing next-generation reliable neuromorphic computing systems.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3490-4
The stringent BT.2020 standard for ultrahigh-definition displays demands green organic light-emitting diodes (OLEDs) with narrowband emission and high external quantum efficiency (EQE), yet conventional multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters suffer from spectral broadening and aggregation-induced quenching. This work integrates spiro-locking motifs and peripheral substitutions into an MR framework to suppress molecular vibrations and mitigate aggregation. The resulting emitters, LL108 and LL125, exhibit narrow full width at half-maximum (FWHM) below 30 nm in doped films and high horizontal dipole ratios. Conventional doped devices achieve maximum EQEs of 29.5% for LL108 and 24.4% for LL125, with Commission Internationale de l’Éclairage (CIE) coordinates of (0.20, 0.71) and (0.18, 0.72), respectively, closely approaching the BT.2020 green standard. Sensitized devices using Ir(ppy)3 as a sensitizer further enhance performance, reaching a maximum EQE of 30.3% and significantly reduced efficiency roll-off, with EQE of 24–25% at 10,000 cd m−2. Although sensitization slightly broadens the emission spectra, higher doping concentrations improve energy transfer and color purity. These results demonstrate that spiro-locking design is a viable strategy for developing efficient, high-color-purity green emitters for next-generation displays.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3576-6
Emulating biological synaptic plasticity is essential for advancing artificial intelligence. However, in most existing synaptic phototransistors to date, both electrical and optical stimuli induce weight modulation within a comparable dynamic range, limiting plasticity tunability and richness. Here, we report a synaptic phototransistor that enables distinct weight modulation in response to electrical and optical inputs, achieving hierarchical, multi-scale plasticity with concurrent visible-light emission for direct display. The device integrates a long-afterglow material that converts transient ultraviolet (UV) excitation into persistent visible emission, serving as a temporally extended, memory-like optical stimulus. Compared to direct electrical gating, this delayed optical activation of the optoelectronic channel induces weight modulation on a significantly longer timescale, enabling hierarchical plasticity and cascade interactions between optical and electrical pathways. The dual-output architecture allows simultaneous optical visualization and electrical signal processing, effectively integrating optical perception with in-sensor computation. Leveraging this design, we demonstrate a UV-resolvable neural network capable of direct image display and achieving a recognition accuracy of 95.03% for handwritten digits. This work establishes a new paradigm for multimodal neuromorphic systems by seamlessly integrating sensing, display, and computation within a unified in-sensor architecture.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3550-4
Hybrid perovskite solar cells (PSCs) have reached a certified power conversion efficiency (PCE) of 27.0%, yet their operational lifetime remains constrained by the intrinsic instability of organic cations, particularly the deprotonation of formamidinium (FA). This study introduces a molecular deuteration strategy to stabilize FAPbI3 by substituting the active hydrogen in the N–H bond with deuterium. The reduced ground-state energy of the N–D bond induces a kinetic isotope effect, lowering the deprotonation rate constant from 5.15 × 10−8 to 2.42 × 10−8 s−1. Solar cells fabricated with deuterated FAPbI3 films achieve a PCE of 25.08% and retain 97% of their initial efficiency (T97) for 1264 h under continuous one-sun illumination at 55 °C. This approach addresses the fundamental deprotonation pathway that limits the longevity of FA-based perovskites, offering a viable route to intrinsically stable photovoltaic devices without relying solely on extrinsic barrier layers or passivators.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3474-2
The precise control of optical polarization states underpins photonic engineering, yet commercial birefringent crystals such as MgF2, α-BaB2O4, and CaCO3 are restricted to specific wavelength ranges and exhibit insufficient birefringence for ultracompact systems. This study introduces a dual-functional group-driven polarization enhancement strategy integrating linear pseudohalogen units ([SCN] and [NCN]) with stereochemically active lone pair electrons (LPEs) of Sn2+. Four compounds—SnCN2, Sn2OCN2, Sn(SCN)2, and Sn(SCN)F—were synthesized and characterized. They exhibit exceptional birefringence values of 0.44–0.73 at 1064 nm, surpassing commercial benchmarks (α-BBO, YVO4, TiO2) by 1.7- to 6.1-fold. SnCN2 achieves the highest birefringence (0.73) due to maximal [NCN] density (0.048 Å−3) and Sn-polyhedra density (0.024 Å−3). Sn(SCN)2 exhibits 0.64 birefringence, four times that of CaCO3, despite lower active unit density, underscoring the pivotal role of spatial configuration. Electron density analysis reveals extreme anisotropy in [SCN] units of Sn(SCN)2, with LPE density concentrated along the nz axis. In contrast, Sn(SCN)F shows minimal electron density variation due to stereochemical inactivity and omnidirectional polarization contributions. This work establishes a fundamental design paradigm for high birefringence materials by maximizing electron density gradients along distinct optical axes.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3732-2
The exploration and utilization of marine resources demand advanced operational tools. At present, deep-sea vehicles equipped with manipulators serve as the primary platforms for underwater exploration. However, the pressure sensors responsible for detecting the subtle gripping forces of these manipulators still face significant technical challenges, primarily due to the extreme hydrostatic pressure, corrosive seawater environment, and stringent mechanical strength requirements. A dual-curing, waterproof digital light processing (DLP) resin has been developed to achieve micron-scale printing accuracy, excellent seawater resistance, and mechanical properties comparable to those of thermoplastic resins. More importantly, the deep-sea pressure sensor (DSPS) features a unique printed lattice structure that allows seawater to penetrate and equilibrate the internal and external pressures, effectively mitigating the effects of deep-sea hydrostatic pressure. Experimental results demonstrate that the sensor exhibits a wide detection range and high sensitivity, with a measured sensitivity of 0.77 kPa−1 under 30 MPa hydrostatic pressure and a signal fluctuation below 1.48%. Furthermore, both the sensitivity and detection range of the sensor can be tuned by adjusting the lattice parameters, providing a robust foundation for the advancement of marine resource exploration.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3643-8
Inverted perovskite solar cells (PSCs) suffer from defect-mediated nonradiative recombination and inefficient charge extraction, particularly at the buried interface and grain boundaries (GBs), which limit power conversion efficiency (PCE) and operational stability. This study introduces a multifunctional phosphonic acid molecule, (2-(3,6-bis(trifluoromethoxy)-9H-carbazol-9-yl)ethyl)phosphonic acid (M28), as an additive in the perovskite precursor solution. M28 spontaneously segregates toward the buried interface and GBs, fulfilling three roles: (1) slowing crystallization to enlarge grains and improve film quality, (2) passivating defects to suppress charge recombination, and (3) inducing p-type doping to create an extra electric field that promotes hole transport. Devices incorporating M28 achieve a champion PCE of 25.96% and retain 80% of initial efficiency after 1500 h of maximum power point tracking. This work demonstrates the efficacy of multifunctional phosphonic acid additives in addressing buried-interface and GB defects, offering a viable route to high-performance, stable inverted PSCs.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3680-8
Two-dimensional (2D) materials with ultrawide band gaps and strong, tunable second-harmonic generation (SHG) coefficients are critical for miniaturized deep-ultraviolet (DUV) nonlinear optical (NLO) devices. Despite extensive experimental synthesis of 2D materials, none have satisfied DUV NLO requirements. Here, an experimentally available graphene-like BeO monolayer composed solely of NLO-active [BeO3] units is identified as an excellent 2D DUV NLO material via first-principles calculations. It exhibits an ultrawide band gap of 6.86 eV and a strong SHG coefficient χ22(2)(2D) = 6.81 Å pm/V. Through stacking, strain, and twist engineering, numerous 2D BeO sheets are predicted, and their flexible structural characteristics enable tunable NLO properties. Remarkably, extremely stress-sensitive out-of-plane χ15(2)(2D) and χ33(2)(2D) (with an exceptional 30% change) and robust in-plane χ22(2)(2D) against large strains are achieved together in AC- and ACE-stacked BeO sheets under in-plane biaxial strain, exhibiting emergent phenomena uniquely not observed in other known 2D NLO materials. These results establish 2D BeO systems as a new option for 2D DUV NLO materials.