SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4391-5
Self-assembled monolayers (SAMs) enable precise tuning of the ITO/active layer interfacial dipole, yet their impact on the crystallization kinetics of the overlying active layer remains poorly understood, limiting their potential in high-efficiency organic solar cells. This study introduces THPC, a self-assembling material with an extended carbazole core and heteroatom substitution, as a hole transport layer (HTL). Unlike the hydrophilic PEDOT:PSS, THPC exhibits low surface energy, providing a favorable template that extends the film formation kinetics of the PM6:L8-BO-X blend by nearly 1.4 times, mitigating the explosive nucleation prevalent in PM6-based active layers. This promotes a highly ordered fibrous morphology and enhances vertical phase separation. The deep work function of THPC (5.32 eV) increases the built-in potential, reduces interfacial trap density, and facilitates charge extraction. Consequently, non-radiative recombination loss decreases from 0.243 eV to 0.227 eV, and the open-circuit voltage rises from 0.866 V to 0.883 V, yielding a power conversion efficiency (PCE) of 20.19%, outperforming the PEDOT:PSS control (18.67%). This finding is confirmed across multiple Y-series acceptors, all approaching 20% PCE. Notably, the D18:L8-BO system achieves a PCE of 20.55%, demonstrating broad applicability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3828-y
The rapid development of halogen-free solvent-processed organic solar cells (OSCs) has been enabled by side-chain modification on small molecular acceptors, yet the structure-property relationship between inner/outer chain lengths and device performance remains unclear. This study systematically investigates five non-fullerene acceptors (NFAs) with varied side-chain positions and architectures, clarifying the effects of inner versus outer modifications on energy level distribution, film morphology, and carrier dynamics. Notably, longer alkyl chains are not always superior; excessive solubility reduces molecular packing order. The optimized PM6:BTP-TO12 blend achieves a power conversion efficiency (PCE) of 18.2%. Furthermore, ternary OSCs incorporating BTP-TO12 as a guest material reach a remarkable PCE of 19.5%, enhancing the performance of L8-BO-based devices processed with green solvents. This improvement is attributed to the low energy loss and well-controlled aggregation behavior of BTP-TO12 in environmentally friendly toluene. These findings establish a design guideline for side-chain engineering in green-solvent-processed OSCs, achieving state-of-the-art performance and advancing scalable, eco-compatible photovoltaic technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3547-7
Inorganic perovskite solar cells (IPSCs) have attracted significant attention due to their excellent light and thermal stability and potential in tandem applications. However, their efficiency and stability are often limited by residual lattice stress and defects at interfaces and within the bulk, causing severe nonradiative recombination. Here, we introduce a zero-dimensional supramolecular complex, (ETP)2SbCl5, as a dual-interface and bulk modifier to regulate CsPbI3 film growth. The modifier exhibits spatial segregation: ETP+ cations anchor at the buried interface, passivating defects on TiO2 and perovskite surfaces; Sb3+ and Cl− ions diffuse into the bulk during annealing, relieving residual stress; and Cl− accumulates on the top surface, passivating cation defects. Consequently, the modified CsPbI3 solar cell achieves a power conversion efficiency (PCE) of 21.71% and an open-circuit voltage (VOC) of 1.27 V, retaining 97.4% of initial efficiency after 500 h of maximum power point (MPP) tracking. This work demonstrates a synergistic strategy to simultaneously address interfacial and bulk defects, advancing high-performance and stable inorganic photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3628-3
The solution aggregation structures of conjugated polymers are pivotal in determining their film morphology and optoelectronic properties, yet the relationship between solution aggregation and device performance remains elusive in organic photodiode (OPD) systems. Herein, we introduce the first examination of solution aggregation structures of all-polymer OPD blends, with a focus on how molecular entanglement modulates aggregation behavior and subsequent photodiode performance of low-cost poly(3-pentylthiophene). Using small-angle neutron scattering and freeze-dried imaging, we provide a comprehensive analysis of the solution-state aggregation behavior of poly(3-pentylthiophene) and its evolution in the blend, revealing profound impacts on film morphology and device performance. With finely optimized aggregation, the resulting all-polymer OPD achieves a record-high specific detectivity of ~4×10^13 Jones at zero bias, outperforming all bulk heterojunction (BHJ)-type self-powered OPDs reported to date. This device also demonstrates remarkable thermal stability, with negligible performance degradation after over 800 h of thermal annealing at 85 °C. Furthermore, the self-powered OPD exhibits excellent performance across a broad spectral range, enabling its application in both water quality monitoring and biosensing. This work offers new insights into the solution aggregation behavior of conjugated polymers in OPDs and highlights the importance of resolving solution aggregation in optimizing device function.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3649-0
Injectable hydrogels formed via dynamic chemical crosslinks hold great promise as drug delivery platforms due to their robust yet adaptable nature, stimuli-responsiveness, and tunable structures and properties. However, their inherently high water content poses a significant challenge for the efficient encapsulation and sustained release of hydrophobic drugs. Here, we present a novel injectable hydrogel system constructed via a strain-promoted disulfide-thiol exchange between dithiolane-functionalized polymer strands and thiolated core-shell nanoparticles (NPs) under physiological conditions. The hydrophobic core and hydrophilic shell structure of the NPs enables effective loading and protection of hydrophobic drugs, while rapid gelation occurs upon mixing the thiolated NPs with dithiolane-polymers in phosphate-buffered saline. The hydrogel shows excellent injectability, self-healing capability, in vitro biodegradability, and cytocompatibility. This hydrogel system enables sustained release of hydrophobic drugs over 32 days in aqueous media and supports sequential dual-drug release. Its redox-responsiveness under tumor-mimicking reducing conditions, enabled by the disulfide crosslinks, further facilitates controlled intracellular drug release. This multi-component platform offers a versatile strategy for designing advanced injectable hydrogels with potential applications in hydrophobic drug delivery and other biomedical fields.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025111002
Epidemiological studies have established a significant association between exposure to environmental pollutants (EP) and the risk of lung adenocarcinoma (LUAD). This study integrates network toxicology and multi-omics analysis to elucidate the EP-LUAD molecular regulatory network and identify key regulatory genes, thereby revealing novel mechanisms of environmental carcinogenesis. Transcriptomic data from GEO and TCGA databases yielded 4,971 and 4,488 disease-related targets, respectively. Integration of toxicology databases (TargetNet, Swiss Target Prediction, CTD, SEA) identified 24,860 potential targets for eight common pollutants (SO2, NO, CO, NO2, O3, benzene, toluene, and polycyclic aromatic hydrocarbons). Intersection of these datasets produced 1,536 EP-LUAD common target genes. Protein-protein interaction network analysis identified 247 core targets. Machine learning selected five key genes: AGER, CAV1, CD44, CEP55, and GNB3, which demonstrated robust diagnostic and prognostic efficacy. Their expression correlated with immune cell infiltration, including CD4+ memory T cells and macrophages. Single-cell RNA sequencing revealed epithelial cell-specific expression patterns. Molecular docking confirmed stable pollutant-target binding, with PAH showing highest affinity for CD44 (binding energy −9.32 kcal·mol−1) and GNB3 (−8.32 kcal·mol−1). These findings establish AGER, CAV1, CD44, CEP55, and GNB3 as core molecular mediators of pollution-related LUAD. The high-affinity binding of PAH to CD44 and GNB3 underscores its carcinogenic potential. This study constructs a multi-level regulatory network for EP-LUAD, revealing underlying molecular mechanisms and providing novel potential targets and theoretical basis for early warning and intervention.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025073004
Micro/nano-plastics (MNPs) are emerging contaminants widely detected in human circulatory systems, including blood, heart, and vascular endothelium, raising concerns about cardiovascular health risks. This systematic review analyzed 61 peer-reviewed studies (2008–2024) to elucidate the cardiotoxic effects and molecular mechanisms of MNPs. Evidence indicates that MNPs exposure elevates risks of atherosclerosis, thrombosis, and arrhythmias through oxidative stress, inflammatory cascades, endothelial dysfunction, and metabolic dysregulation. Notably, co-exposure with persistent organic pollutants (POPs) or heavy metals may produce synergistic or antagonistic effects. Current research relies predominantly on animal and cell models, with critical gaps in low-dose, long-term exposure data and epidemiological evidence. Future studies should optimize experimental designs, integrate metabolomics and epigenetics, and explore transgenerational effects and combined toxicity mechanisms to inform pollution control policies and mitigate cardiovascular risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024121201
A method for the simultaneous determination of 19 sulfonamide antibiotics in environmental aqueous samples was developed by integrating solid-phase extraction (SPE) and gel permeation chromatography (GPC) with ultra-performance liquid chromatography–triple quadrupole mass spectrometry (UPLC-MS/MS). Aqueous samples were filtered through 0.45 μm membranes, adjusted to pH 6, and treated with Na2EDTA at 2.5 mg·L−1 to mitigate matrix effects. Analytes were enriched on Oasis HLB cartridges, purified by GPC, and separated on a Hypersil GOLD C18 column (2.1 mm ID × 100 mm, 1.9 μm) using gradient elution with 0.05% (V/V) formic acid in water and methanol. Detection was performed in multiple reaction monitoring (MRM) mode with internal standard quantification. Under optimal conditions, limits of detection (LOD) and quantification (LOQ) ranged from 0.7–4.4 ng·L−1 and 2.8–17.6 ng·L−1, respectively. Recoveries from spiked real samples at 10, 200, and 400 ng·L−1 were 44.5%–102%, 47.7%–97.5%, and 51.4%–115%, with relative standard deviations (RSDs) of 1.8%–10%, 0.64%–5.9%, and 0.71%–4.6%, respectively. The method was applied to three surface waters and three municipal wastewater treatment plant effluents, detecting five sulfonamides at concentrations ranging from 1.82 to 3864 ng·L−1. The combined SPE-GPC cleanup effectively reduced matrix suppression, offering high sensitivity, precision, and robustness for routine monitoring of sulfonamide antibiotics in environmental waters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3879-5
Stimuli-responsive circularly polarized luminescence (CPL) materials are pivotal for investigating excited-state chirality and advancing optoelectronic applications. However, achieving comprehensive modulation of chiroptical properties within a single system under a single external stimulus remains a significant challenge. Here, electric-field-responsive helical ferroelectric liquid crystals are developed by incorporating diverse chiral emitter dopants into the prototypical liquid crystal mesogen 2,3′,4′,5′-tetrafluoro-[1,1′-biphenyl]-4-yl 2,6-difluoro-4-(5-propyl-1,3-dioxan-2-yl)benzoate (DIO), known for its high dielectric anisotropy and multiple mesophases. By co-doping different types of chiral molecules with opposite handedness, a competitive chiral field is generated that responds differentially to the applied voltage, enabling continuous modulation of the helical pitch and reversible inversion of handedness. This work provides the integrated demonstration of single-stimulus regulation of on/off gating, magnitude tuning, and reversible sign inversion in a single liquid-crystal system, opening a pathway toward intelligent chiroptical materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030303
Emerging organic pollutants (EOPs) represent a class of toxic and hazardous chemicals characterized by ecotoxicity, environmental persistence, and bio-accumulation. Conventional water treatment processes have proven inadequate in eliminating these EOPs, leading to their accumulation in aquatic ecosystems and posing severe threats to the health and safety of aquatic organisms. Consequently, the development of efficient technologies for the complete elimination of EOPs from water matrix is of great importance. Recently, carbon nitride (CN)-based photocatalytic degradation technologies have been extensively utilized for the efficient treatment of organic pollutants in water environments due to their advantages of being green, efficient, and cost-effective. Furthermore, the catalytic activity of CN-based photocatalytic systems can be significantly improved and energy recovery can be achieved via coupling these systems with other advanced oxidation technologies. This review provides a critical review of the modification strategies for CN photocatalytic materials and their application in photocatalytic coupling systems toward EOPs elimination. Moreover, the opportunities and challenges on the photocatalytic coupling systems have been discussed.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3863-x
Lead-free double perovskites are promising for optoelectronic applications due to their tunable optical properties, stability, and non-toxicity. However, achieving efficient ultrabroadband near-infrared (NIR) emission and X-ray radioluminescence (RL) simultaneously remains challenging. Here, we report a Mo4+-doped Cs2(Na0.4Ag0.6)InCl6 double perovskite that exhibits efficient blue-light-excitable NIR emission with a near-unity photoluminescence quantum yield. The emitter demonstrates robust thermal stability, retaining 84% of its initial emission intensity at 420 K relative to 300 K. Under X-ray irradiation, the material shows bright NIR RL with a high light yield of 39,400 ± 1100 photons/MeV. A flexible film of Mo4+-doped Cs2(Na0.4Ag0.6)InCl6/polydimethylsiloxane (PDMS) was fabricated and applied as an NIR light source and X-ray scintillator. A dual-functional platform for cooperative NIR and X-ray imaging was established using a bullfrog palm as the target, achieving pixel-level fusion of NIR and X-ray images without spatial mismatch or complex image processing. The fused image simultaneously visualizes blood vessels and skeleton textures under the skin tissue. This work provides a viable strategy for lead-free double perovskites in advanced optoelectronic devices, particularly for multispectral imaging.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511076
This study investigated the altitudinal distribution and enrichment characteristics of heavy metals in the soil-plant system of the northern and southern mountains of Lhasa on the Tibetan Plateau. Soil and dominant plant samples were collected from three sites along an elevation gradient from 3,650 to 4,150 m, and concentrations of Cr, Cd, Cu, Zn, Ni, As, and Pb were analyzed. Soil heavy metal concentrations ranged from 0.06 to 184.4 mg·kg−1, with all elements except Cd and Pb exceeding local background values. Plant heavy metal concentrations were within normal ranges, indicating no obvious stress. Correlation analysis revealed significant positive correlations between soil Zn and Cd, Cr and Ni, and plant Zn and Cu. Except for Cr, Cu, and Cd, plant and soil concentrations of the same element were significantly correlated. Bioconcentration factor (BCF) analysis showed that most plants had weak enrichment capacity (BCF < 1), but five species, including Ephedra sinica and Rheum likiangense, exhibited BCF > 1 for Cd, with R. likiangense showing the highest BCF of 4.01. The enrichment capacity varied with altitude and species. Potential ecological risk assessment indicated that Cd posed a relatively high risk in plants, warranting attention. This study fills a gap in understanding the spatial distribution and enrichment of heavy metals in this region, providing a scientific basis for ecological management and environmental protection.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511020
With the increasing number of oil pipelines crossing rivers, the potential risks of oil leakage and surface spreading to river ecosystems and water environments are becoming more severe. Scenario-based simulation of oil spill diffusion is a prerequisite for effective interception point placement and leakage risk prevention. Numerous factors influence oil spill diffusion, including environmental conditions, river hydrology, and accessibility of emergency resources. This study integrates these factors and multiple dynamic processes to design eight typical scenarios for oil spill diffusion simulation, considering emergency resource locations, river hydrological regimes, and leakage modes. A case study is conducted on an oil pipeline crossing a river in northwest China. Results indicate that the diffusion distance and affected area are primarily controlled by water conditions and emergency resource accessibility. In emergency management, the efficiency of maintenance and repair resources during high-water months should be prioritized. Mechanistically, external forces such as hydraulic and wind forces have a greater influence on diffusion distance, surpassing internal forces like gravity, viscosity, and surface tension within a short time. For river crossings near emergency resources, internal force effects should be considered in oil spill diffusion simulations. When emergency resource arrival times are long, the diffusion distance based on Fay's theory is relatively small and can be neglected in engineering practice. This study provides a computational basis and methodological reference for risk assessment and emergency response to potential oil spills from pipelines crossing rivers, enhancing the scientific and effective nature of risk prevention and emergency handling.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031202
Manganese-rich constructed wetlands (CWs) have emerged as an effective strategy for enhanced nitrogen removal, yet current understanding of their denitrification mechanisms remains limited to speculative interpretations of microbial community structures. This study developed a novel CW-MFC system integrating manganese ore (MO) and activated carbon (AC) substrates with microbial fuel cell (MFC) technology to investigate the manganese-nitrogen coupling biochemical metabolism. It was systematically evaluated the effects of influent organic carbon concentrations on nitrogen removal performance and elucidated the mechanisms of electron transfer and their coupling with nitrogen removal pathways through multi-dimensional analyses, including functional enzymes, extracellular polymeric substances (EPS) characterization, intra-/extracellular electron transfer-related gene expression, and electron transport activity. Results showed that the synergistic integration of MO, AC, and MFC configuration significantly enhanced nitrogen removal efficiency, with ammonium removal reaching up to 5.5 times that of the control group. The functional substrates notably upregulated enzyme activities of nitrogen transformation in biofilms while stimulating nitrification and anammox processes at the anode. EPS analysis revealed that Mn2+ derived from manganese reduction was captured by EPS, thereby facilitating the manganese cycling. Concurrently, the increased abundance of electron transport chain (ETC) and extracellular electron transfer (EET) genes, coupled with increased cytochrome C (Cyt-C) concentration and activity, confirmed enhanced EET performance. It indicated that the coordinated EET network among electrodes, microorganisms, MO, and AC serves as critical electron mediators for nitrogen transformation. This study provides mechanistic insights into manganese-carbon coupled CW-MFC systems regarding nutrient removal, biogeochemical cycling, and electron transfer dynamics, advancing fundamental knowledge for the development and application of manganese-rich constructed wetland technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3901-2
This work presents a cracked template and vacuum metal evaporation strategy for fabricating structurally randomized copper (Cu) mesh films. Regulating the internal stress distribution within the coating during template cracking enables controlled fabrication of Cu mesh films with varying discrete degrees of mesh aperture area and distinct probability distributions of metal line inclination. The influence of structural parameter randomization on properties was systematically investigated, encompassing higher-order diffraction energy homogenization, optoelectronic performance, and electromagnetic interference shielding effectiveness (EMI SE). Results demonstrate that increasing structural randomization effectively suppresses higher-order diffraction energy, achieving a reduction to −3.93 dB in normalized higher-order diffraction energy. Furthermore, the Cu mesh film exhibited minimal degradation on imaging system performance, with resolution decreasing only marginally from 80.6 to 71.8 lp/mm. Simultaneously, the most randomized Cu mesh film demonstrates an ultra-low sheet resistance (3.31 Ω/sq), high visible light transmittance (88.7% at 550 nm), an exceptional figure of merit (FoM=913.69), and robust EMI SE within the X-band (average SE of 33.18 dB). These findings underscore that metal mesh films incorporating structural randomization offer an effective strategy for enhancing EMI shielding in high-performance optoelectronic imaging systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3984-5
Rechargeable aluminum batteries (RABs) are promising for large-scale energy storage due to high theoretical capacity, inherent safety, and abundant aluminum reserves. However, conventional AlCl3-based ionic liquid electrolytes suffer from high cost, uncontrolled dendrite growth, and severe anode corrosion. Here, a molecular-level ligand engineering strategy is proposed, employing nitrogen-containing cyclic amides with tunable N–H functionalities to modulate the coordination environment of deep eutectic electrolytes (DEEs). Combined experimental and theoretical investigations reveal that the α-pyrrolidone-based DEE (PDEE) possesses a wider electrochemical window, higher ionic conductivity, and lower polarization. Precise N–H regulation optimizes cationic ligand and chloroaluminate anion interactions, accelerating ion transport to facilitate uniform Al deposition without dendrites. The amine functionalities enable in situ construction of a uniform inorganic-organic bilayer solid electrolyte interphase, mitigating anode corrosion and enhancing long-term interfacial stability. As a result, Al//Al symmetric batteries with PDEE achieve stable cycling for over 2000 hours, while Al-graphite full batteries demonstrate negligible capacity decay after 6000 cycles. This study establishes that ligand molecular engineering offers an effective strategy for optimizing DEEs, enabling durable and high-performance RABs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050803
This study systematically investigates the synergistic drag reduction mechanism of surfactants and porous media in coal seam water injection. Four surfactant types—cationic CTAB, anionic SDBS, amphoteric BS-12, and nonionic OP-10—were tested with five porous media pore sizes (3–12 mm) using a custom-built all-in-one drag reduction test system. The effects of surfactant type, mass concentration, driving frequency, and pore diameter on drag reduction efficiency were evaluated. Results show that in an empty tube, drag reduction efficiency increases with mass concentration. As driving frequency increases, drag reduction first rises then falls, peaking at 35 Hz. With porous media, drag reduction exhibits pore size dependence, reaching a maximum at 8 mm and decreasing thereafter. The composite surfactant-porous media system achieves synergistic enhancement over single systems. At 0.05% mass concentration, all surfactants attain maximum drag reduction, with CTAB showing the highest efficiency. Optimal conditions (0.05% CTAB, 35 Hz, 8 mm pore size) yield a drag reduction rate of 66.14%, a 1.4-fold improvement over 20 Hz. These findings demonstrate that tailoring surfactant and porous media parameters can significantly optimize coal seam water injection efficiency, offering a practical approach for dust control in mining.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608007
The Minjiang River Basin, subjected to combined pollution from domestic, agricultural, and industrial sources, has become a typical sensitive area for studying the environmental behavior of emerging contaminants such as antibiotics. This study conducted a cross-year comparative analysis of the composition and concentrations of antibiotics in water samples from nine sampling sites during the dry season in November 2022 and 2024. The findings revealed: 1) After the implementation of the "National Action Plan for Reducing Antimicrobial Use in Livestock", the detection concentrations of tetracycline antibiotics (TCs) decreased (e.g., doxycycline concentrations dropped from 7.75 ng/L to undetectable levels), and the mixed risk quotient (MRQ) across the entire basin transitioned from medium to low risk. However, lincomycin (up to 4.6 ng/L), clarithromycin (1.3 ng/L), and florfenicol (0.6 ng/L) have emerged, indicating an increasing hidden ecological risk from substitution. 2) High-concentration antibiotic zones transferred from urban residential areas in 2022 to intensive aquaculture zones and upstream reservoir areas in 2024. The reduction in dry-season water flow intensified pollutant accumulation, synergistically enhancing the effects of tidal drag. Additionally, the conversion of agricultural land to aquaculture ponds led to increased use of alternative drugs (e.g., sulfamethazine), while policy interventions mitigated the exacerbation of urban antibiotic pollution by construction land. This study elucidates the migration patterns of antibiotic pollution under the synergistic effects of policy regulation and natural processes, emphasizing the need to address hidden risks of substitute drugs and the driving role of land-use changes, providing scientific basis for watershed-scale risk assessment and precise management of emerging pollutants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4040-0
High-performance organic second-order nonlinear optical (NLO) crystals face a persistent challenge: molecular designs that enhance hyperpolarizability often crystallize into centrosymmetric or nonpolar arrangements, suppressing bulk second-order response, while simultaneously reducing optical bandgaps, enforcing a trade-off between nonlinearity and transparency. We report a chirality-driven polar lattice engineering strategy that couples molecular asymmetry with directional intermolecular interactions to promote polar ordering. A binaphthyl-based chromophore (S-3) crystallizes in the polar space group P2₁, exhibiting strong second-harmonic generation (~3.53 × KDP), wide transparency (3.91 eV), phase-matchable birefringence (Δn = 0.15), high laser damage threshold (742.6 MW cm⁻²), and thermal stability up to 210 °C. Theoretical calculations reveal a 69% enhancement in first-order hyperpolarizability (β_tot) relative to the unfunctionalized derivative, with a net intramolecular electron transfer of 0.16 e⁻ from the chiral scaffold to the benzoate acceptor. Crucially, enantiomeric crystals exhibit identical NLO responses, confirming that bulk nonlinearity is governed by engineered lattice polarity, not molecular handedness. This work establishes chirality as an active tool for crystal engineering and provides a general design paradigm for high-performance organic NLO materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3548-9
Photodynamic therapy (PDT) is constrained by the absence of tumor selectivity in conventional photosensitizers (PSs), which produces phototoxicity in normal tissues and risks activation by ambient light. Covalent conjugation of PSs to targeting peptides improves accumulation but does not suppress off-target activation. This work reports B-HCPP-RGD, a single-molecule PS that integrates αVβ3 integrin targeting with dual responsiveness to H2O2 and cathepsin B. The hypocrellin-derived type I PS HCEA is masked by a 4-(bromomethyl)phenylboronic acid pinacol ester H2O2-responsive group and conjugated to cyclic Arg-Gly-Asp (cRGD) through a cathepsin B-cleavable Gln-Val dipeptide linker. ROS generation in solution is effectively suppressed until both H2O2 and cathepsin B are present, at which point HCEA is released. In vitro, B-HCPP-RGD shows negligible phototoxicity toward normal cells and pronounced phototoxicity toward tumor cells, including under hypoxic conditions. In vivo, the conjugate actively targets tumor tissue and achieves a high tumor inhibition rate with favorable biosafety. The results establish a modular design for dual-responsive, tumor-targeted PSs that improves the precision and safety of PDT.