SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4320-4
Colloidal lead halide perovskite quantum dots (Pe-QDs) have achieved external quantum efficiencies exceeding 20% in red, green, and blue light-emitting diodes (LEDs), yet their integration into high-resolution displays is impeded by two persistent bottlenecks: the intrinsic ionic lability of Pe-QDs, which compromises structural and environmental stability, and the absence of mild, high-fidelity patterning techniques that avoid ligand detachment and surface defect formation. This work addresses both obstacles through a dual strategy. First, a ligand-fluoride co-stabilization method yields shape-defined, colloidally stable rhombic dodecahedral CsPbBr3 Pe-QDs; subsequent fluorine surface reconstruction using tetrabutylammonium fluoride (TBAF) enhances ligand binding affinity, producing BHOA+F CsPbBr3 Pe-QDs with a photoluminescent quantum yield (PLQY) of 94.6%. Accelerated ageing, ultraviolet irradiation, and thermal cycling tests confirm improved structural and environmental stability. Second, capillary liquid-bridge confined assembly enables reproducible, scalable fabrication of pixelated Pe-QDs with in-plane long-range order, vertical confinement, and precise spatial patterning. The resulting pixelated Pe-QDs LEDs exhibit high efficiency, sufficient brightness, and long operational stability, with the approach generalizable across red, green, and blue Pe-QDs for wide color gamut displays. This combination of surface fluorination and liquid-bridge assembly represents a landmark achievement in high-resolution display technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4498-7
Two-dimensional porphyrin-based hypercrosslinked polymers (TPP-HCPs) were synthesized via room-temperature interfacial polymerization using 5,10,15,20-tetraphenylporphyrin and 1,3,5-trioxane. The resulting TPP-HCPs exhibited a BET surface area of 548 m2 g-1 and a CO2 uptake of 7.97 wt% at 1 bar and 298 K. CuO/TPP-HCPs nanospheres were fabricated by thermal conversion of Cu(NO3)2·3H2O in DMF at 135 °C, using TPP-HCPs as dynamic templates. This in-situ strategy generated CuO nanoparticles within the conjugated porous matrix, facilitating electron transfer and enhancing CO2 access to catalytic centers. In CO2 electroreduction, the composite achieved a total gas Faradaic efficiency exceeding 90% at ~500 mA cm-2 (-1.4 V vs. RHE), with 40.9% for C2H4, 8.2% for CH4, 31.9% for CO, and 12.3% for H2. The catalyst maintained stability over 24 h in an H-cell. These results demonstrate that 2D conjugated polymer-templated catalysts can sustain high-rate CO2 conversion to value-added products, offering a viable route for industrial CO2 utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4319-x
This erratum corrects an error in the Acknowledgments section of the original article 'Investigation on graphene growth by roll-to-roll chemical vapor deposition' published in Science China Materials, Vol. 65, Issue 4, page 1042, 2022. The authors regret that the funding number (No. (2021)105) for the Shenzhen Science and Technology Program was incorrectly used. The correct funding number is No. KQTD20200820113010022. The authors apologize for any inconvenience caused. This correction does not affect the scientific content, results, or conclusions of the original paper. The original research focused on the kinetics of graphene growth via roll-to-roll chemical vapor deposition (CVD), a scalable method for producing high-quality graphene films. The study addressed challenges in continuous manufacturing, such as uniformity, growth rate, and defect control, and provided insights into optimizing process parameters for industrial-scale production. The erratum ensures accurate attribution of funding sources, maintaining the integrity of the research record.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4381-5
Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4179-x
Perylene diimide (PDI) radical anions exhibit poor environmental stability, restricting their generation efficiency and practical application. Here, a PDI-functionalized bispillar[5]arene (PDI-P5) was designed to construct stable and high-efficiency photothermal radicals. Intramolecular charge transfer (ICT) between PDI and bispillar[5]arene narrows the energy gap. Under 455 nm ultraviolet light irradiation and diethylamine (DEA) vapor exposure, photoinduced electron transfer (PET) efficiently generates PDI-P5·− radicals, which possess broad near-infrared (NIR) absorption, enhanced non-radiative transitions, and excellent stability. Notably, PDI-P5·− can rapidly reach 90 °C under 0.20 W cm−2 simulated sunlight irradiation. Moreover, it exhibits superior multi-step photothermal anti-counterfeiting performance. This work provides a novel strategy for the development of stable radical-based photothermal materials, which holds great potential for anti-counterfeiting and bioimaging applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3610-7
Electrochemical CO2 reduction reaction (CO2RR) offers an attractive route to produce value-added multicarbon (C2+) products, yet suffers from competing hydrogen evolution and monocarbon production. Here, we propose a dual-confinement effect on CO2 reactant and *CO intermediate, induced by tuning the pore configuration of reconstructed covalent organic frameworks (RC-COFs). The highly crystalline microporous RC-COF-1, when coated on a Cu electrode, enhances local CO2 concentration and restricts CO diffusion, thereby promoting C-C coupling. In acidic electrolyte, the RC-COF-1@Cu electrode achieves a maximum C2+ Faradaic efficiency (FE) of 67.0% at 500 mA cm−2, while maintaining a total carbon product FE above 90% across a broad current density range (100–500 mA cm−2). Experimental and theoretical analyses confirm that the ordered micropores of RC-COF-1 modulate reactant adsorption and intermediate diffusion, leading to improved C2+ selectivity. This work underscores the critical role of COF pore architecture in microenvironment engineering for heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3506-3
Metallic glasses (MGs) often suffer from sluggish hydrogen evolution reaction (HER) kinetics in neutral and alkaline media, with their catalytic performance predominantly confined to acidic environments. Herein, we reported a novel thermoplastic forming technique to fabricate a self-supported partially crystallized nanoporous Pt56.2Ni5.2Cu16.8P21.8 metallic glass (C-NPMG). The C-NPMG catalyst delivers ultralow overpotentials of 18.0 mV (0.5 M H2SO4), 42.2 mV (1 M KOH), and 88.0 mV (1 M phosphate-buffered saline (PBS)) at a current density of 10 mA cm−2, outperforming most state-of-the-art non-noble MGs and Pt-based benchmarks across all pH conditions. Notably, it maintains negligible performance decay for over 1000 h in alkaline electrolytes, showcasing superior stability. Experimental and computational analyses reveal that the enhanced HER activity arises from three synergistic effects: (1) the high-specific-surface-area nanoporous architecture that maximizes active site exposure; (2) the formation of crystallite-amorphous interfaces during partial crystallization, which lowers the energy barrier for H2 desorption; (3) the hierarchical super-hydrophilic and super-hydrophobic wettability of the C-NPMG, which optimizes mass transport and prevents electrolyte-induced corrosion. This work establishes a novel design paradigm for developing high-performance, pH-universal HER electrocatalysts by integrating structural nano-engineering and crystallite-amorphous phase synergy in metallic glass systems to overcome the trade-offs between performance and stability in electrochemical water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3702-0
Construction of metal-mediated redox sites is an appealing approach to enhance photocatalytic CO2 reduction coupled with H2O oxidation. However, conventional static redox sites generally lack spatiotemporal matching during reaction processes due to the constraints of rigid structure and the linear scaling relationship of adsorbed species. Herein, an alkanolamine-Ir synergistic system was developed, where flexible monoethanolamine (MEA) molecules function as molecular ferries to selectively adsorb CO2 via carbamate formation, while adjacent Ir nanoparticles (NPs) serve as H spillover hubs that relay protons, creating spatiotemporal adaptability that synchronizes CO2 reduction and water oxidation. In addition, time-resolved in situ spectroscopy directly captures the rapid transformation of carbamate intermediates concurrent with sustained IrOOH intermediates formation. Microkinetic modeling further demonstrates that the MEA-Ir modified system (M-Ir/ACN) creates interconnected H spillover networks between Ir NPs and MEA, facilitating efficient proton transport that drives *COOH formation with a favorable thermodynamic energy. As a result, the M-Ir/ACN achieves a 20-fold increase in CO production compared to the pristine sample while maintaining high stability throughout 45 h of continuous operation. This study presents that flexible molecular ferries boost CO2 adsorption, and deciphers how flexible molecular-metal synergy directs the trafficking of CO2-derived intermediates toward highly efficient CO2 photoreduction.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024120701
Surface waters contain numerous photoactive substances and low molecular weight carboxylic acids (LCAs). Hydroxyl radicals (HO•) can react with LCAs to generate the highly reducing carbon dioxide anion radical (CO2•−). Excited triplet state dissolved organic matter (3DOM*), a common oxidant in surface waters, may also oxidize LCAs to CO2•−, but this pathway remains unexplored. This study simulated sunlight-driven generation of CO2•− via 3DOM* using 4-benzoylbenzoic acid (CBBP) as a 3DOM* precursor and formate (HCOO−) as a model LCA. Metronidazole (MNZ) served as the target pollutant. Comparative degradation experiments in hν, hν/HCOO−, hν/CBBP, and hν/CBBP/HCOO− systems, combined with electron spin resonance spectroscopy and quenching tests, confirmed that CO2•− generated in the hν/CBBP/HCOO− system was the primary reactive species responsible for enhanced MNZ degradation, originating mainly from 3CBBP* oxidizing HCOO−. Under optimized conditions (8 mmol·L−1 HCOO−, 200 μmol·L−1 CBBP, 10 μmol·L−1 MNZ), 98.2% degradation was achieved within 30 min. Degradation efficiency increased with HCOO− concentration and was pH-independent. Cl−, NO3−, CO3^2−, and low concentrations of HCO3− inhibited degradation, while high HCO3− slightly promoted it. Humic acid (HA) inhibited degradation in a concentration-dependent manner. The system also performed well in real water matrices, suggesting potential for treating micropollutants via reductive pathways.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3976-x
The discovery of high-temperature superconductivity in bilayer nickelate La3Ni2O7−δ (La-327) under high pressure and in thin films at ambient pressure has opened new avenues in superconductivity research. However, La-327 exhibits a narrow phase stability range, leading to stacking faults that suppress bulk superconductivity. Chemical substitutions, particularly at the A-site with smaller rare-earth ions, have been shown to enhance phase purity and reduce stacking faults, while also increasing the orthorhombic distortion and chemical pressure. In this work, we apply the high-entropy (HE) strategy to stabilize the 327 phase with reduced average A-site ionic radius (rA). We successfully synthesized medium-entropy La1.2Pr0.6Nd0.6Sm0.6Ni2O7−δ (ME-327) and high-entropy La0.67Pr0.67Nd0.67Sm0.33Eu0.33Gd0.33Ni2O7−δ (HE-327) polycrystalline samples. These compositions satisfy medium- and high-entropy criteria, with rA values of 1.181 Å and 1.164 Å, respectively. The samples are phase-pure and homogeneous. HE-327 exhibits the lowest cell volume, largest orthorhombicity, and shortest interlayer Ni-Ni distance among reported bilayer nickelates. Physical property measurements reveal low electrical conductivity and a high density-wave (DW) transition temperature. Under high pressure, HE-327 shows a resistivity anomaly at 103 K under 31 GPa, suggesting a possible superconducting transition. Extrapolation indicates that Tc under high pressure exceeds 100 K for HE-327, correlating with reduced rA and enhanced interlayer coupling. Our results demonstrate the ionic size effect and the effectiveness of the HE approach in stabilizing bilayer nickelates, providing a new avenue for developing superconducting materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012501
Childhood hypertension is a growing global concern, with approximately 4% of Chinese children exhibiting sustained elevated blood pressure meeting hypertension criteria, and single-time-point screening detecting rates of 14%–20% (up to 19% in obese children). Environmental exposure to metals (lead, cadmium, arsenic, mercury, copper, chromium) and bisphenol analogues (bisphenol A, S, F) has been implicated as a modifiable risk factor. This review synthesizes epidemiological evidence linking such exposures to blood pressure alterations in children and adolescents, highlighting dose-response relationships and potential mechanisms, including oxidative stress, endothelial dysfunction, and epigenetic programming. Key findings from cited studies indicate that low-dose bisphenol A exposure alters human cardiomyocyte functionality, and synergistic effects with insulin resistance elevate childhood blood pressure. Metal exposures, particularly lead and cadmium, are associated with increased blood pressure and cardiovascular structural changes. The review underscores the critical window of developmental exposure and the 'tracking phenomenon' linking childhood blood pressure to adult hypertension. Limitations include cross-sectional designs and confounding by mixed exposures. Future research should employ longitudinal cohorts and multi-pollutant models to refine risk assessment. Preventive strategies should integrate school health programs to reduce environmental exposure and monitor cardiovascular health.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3989-4
Organic-inorganic hybrid metal halides (OIMHs) based on Cu(I) ions exhibit broad application prospects in stimulus-responsive luminescent materials due to their rich structural diversity and highly adjustable electronic states. However, achieving sensitive and broad-temperature-range thermal responses remains a significant challenge. Here, we synthesize a zero-dimensional warm white-light emitting OIMH, MPC-W ((C9H20N2O)4(Cu2I4)(Cu2I6)(H2PO2)2), using 4-morpholinopiperidine (4-MP) and CuI. MPC-W features hybrid structures of [Cu2I4]2− and [Cu2I6]4−. The coexistence of three luminescent mechanisms—organic cluster luminescence (CL), self-trapped exciton (STE) emission of [Cu2I6]4−, and cluster-centered (CC) state luminescence of [Cu2I4]2−—endows MPC-W with temperature- and excitation-wavelength-dependent dynamic luminescence. From 77 to 297 K, the luminescence color continuously tunes from blue to cyan, green, yellow-green, and white. In the range of 217–463 K, MPC-W exhibits abnormal luminescence enhancement with increasing temperature. Upon chemical stimuli, MPC-W reversibly transforms into blue-emitting MPC-B ((C9H20N2O)Cu2I4) and yellow-emitting MPC-Y ((C9H18N2O)7Cu8I8). These dynamic luminescent properties position MPC-W for applications in temperature sensing, optical anti-counterfeiting, and password locks. This work provides new insights for developing wide-temperature-responsive multifunctional intelligent luminescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3921-2
Moisture-enabled energy harvesting technologies offer a promising route for self-powered strain sensing, yet conventional generators suffer from slow response, poor recovery, and limited multidirectional resolution. Here, we report a stretchable thermoplastic polyurethane (TPU) nanofiber moisture-enabled electric generator (MEG) with highly aligned ion channels. A carbon black/sodium dodecylbenzene sulfonate (CB/SDBS) layer is coated on the TPU membrane, while carboxymethyl cellulose (CMC) and acidified poly(sodium 4-styrenesulfonate) (HPSS) are applied on opposite sides, establishing lateral hydrophilicity and ion gradients to drive directional ion migration. The planar MEG is lightweight, flexible, and requires no fully covered electrodes, enabling conformity to complex deformations. The aligned channels reduce ion migration tortuosity, enhancing ion transport efficiency and flux. As a result, the aligned MEG (ATMEG) delivers 0.2 V and 0.51 μA cm−2 at ~90% relative humidity, corresponding to 400% and 287% enhancements compared with the unaligned MEG (UATMEG). The ATMEG also exhibits ultrafast response (0.16 s) and recovery (0.08 s). Utilizing its anisotropic characteristics, a multidirectional self-powered strain sensor is developed, capable of distinguishing both the amplitude and direction of human motion, demonstrating strong potential for adaptive wearable electronics and intelligent motion monitoring.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60710-4
Lignin pyrolysis is a promising route for sustainable production of high-value phenolic chemicals, yet the intricate radical reaction network remains a major bottleneck to optimizing product selectivity. This work constructs a standardized DFT computational database that systematically describes the fast pyrolysis of vanillyl alcohol at 823.15 K. The database features three key components: primary reaction pathways, thermodynamic energy barriers, and atomic-level electronic fingerprints. The dataset covers primary reaction pathways, secondary rearrangements, and both global and local reactivity indices of key intermediates. Notably, it innovatively integrates electronic-structure fingerprints, filling the gap in reaction-network–electronic-property correlation data. Standardized computational workflows and rigorous quality control ensure accuracy, consistency, and reproducibility. The public release of this dataset provides a reliable theoretical benchmark for mechanistic studies of lignin pyrolysis and offers foundational data support for rational design of new catalysts and refinement of reaction kinetic models. Ultimately, this database not only provides an important reference for data-driven catalyst development but also lays a theoretical foundation for precise regulation of lignin depolymerization.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608024
Microbial remediation is a widely used technology for treating chromium pollution in groundwater. This study conducted a bibliometric analysis of 441 papers from the Web of Science Core Collection (2010–2024) using CiteSpace, VOSviewer, and Pajek. The publication trend increased over the period, with three developmental stages identified: early (2010–2016) focusing on basic treatment methods, intermediate (2017–2019) on intrinsic mechanisms, and recent (2020–2024) on process optimization. Biological adsorption and reduction were identified as the primary mechanisms. Correlation and principal component analyses of environmental factors (temperature, pH, initial Cr concentration, reaction time) revealed temperature as the key factor affecting remediation efficiency. The removal efficiencies and mechanisms of various dominant bacterial strains were summarized to guide strain selection. Future research should focus on microbial community synergy, nanomaterial integration, and environmental optimization to enhance remediation efficiency.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60668-8
A series of Co-based molecular sieve catalysts with varying Si/Al ratios was synthesized via impregnation. Microstructural properties of Co active sites were characterized by XRD, TEM, Raman, H2-TPR, Py-FTIR, and XPS. Results indicate that surface Co species predominantly exist as CoOx nanoclusters and isolated Co2+, with the latter exhibiting superior N2O decomposition activity. Decreasing the Si/Al ratio of the MFI zeolite promotes the formation of isolated Co2+ active sites, thereby enhancing catalytic performance. Compared to Co/S-1 (pure silica support), the Co/HZ60 catalyst (low Si/Al ratio ZSM-5) lowers the temperature for complete N2O decomposition by 80 °C and demonstrates excellent resistance to O2 and NO. The strong interaction between the zeolite framework and Co2+ inhibits oxidation to Co3+, improving N2O adsorption and activation. This work provides a rational design strategy for efficient and stable Co-based catalysts for N2O abatement in industrial tail gases.