SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4381-5
Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3553-7
Gesture interaction has emerged as a highly effective interface for intelligent human-computer interaction, attributed to its intuitive interaction modality and multi-dimensional control capabilities. However, traditional gesture interaction devices often depend on predefined encoding rules, which substantially limit interaction efficiency and degrade user experience. This study introduces an innovative intelligent finger ring interaction system based on a triboelectric nanogenerator utilizing PDMS/SrTiO3 composite thin film (PS-TENG). The system maps freehand writing gestures directly to textual information input, thereby eliminating the need for complex gesture encoding schemes and offering a user-friendly, low-learning-curve input method. By integrating a deep learning model, the system achieves recognition accuracies of 98.21% for English letters, 96.87% for Arabic numerals, and 96.44% for Chinese characters. Furthermore, it supports secure and encrypted data transmission and enables wireless interaction for gaming control. These findings indicate that the intelligent finger ring interaction system possesses significant potential for practical applications in information input and wireless control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3770-9
Intramolecular through-space charge-transfer (TSCT)-enabled thermally activated delayed fluorescence (TADF) emitters have shown exceptional potential for advancing organic light-emitting diode (OLED) technologies, owing to their efficient utilization of triplet excitons and optimized photophysical properties. To date, the intrinsic correlation among molecular geometries, intramolecular non-covalent interactions, and photophysical properties in TSCT-TADF emitters remains unconfirmed, and this study theoretically clarifies this critical correlation. Specifically, through integrating molecular engineering, screening strategies, first-principles calculations, energy decomposition analysis, and statistical modeling, we systematically investigated 24 experimentally reported TADF molecules, and 54 newly designed structures in both solution and thin-film environments. We establish a clear geometric criterion for high-efficiency TSCT-TADF emitters: donor-acceptor (D-A) dihedral angles below 25° and interfragment distances within 4 Å—conditions validated by both theoretical predictions and experimental evidence. Based on this insight, we designed two novel molecular libraries with benzene- or carbazole-derivative bridges, using O-bridged triphenylamine (DPXZ) as the donor and quinolino[3,2,1-de]acridine-5,9-dione (QAO) as the acceptor. Our calculations confirm that sub-25° D-A dihedral angles correlate with exceptional delayed fluorescence efficiency, with predictions reaching up to 96% and an average of 70% for the new thin film systems. This study provides a rational design strategy for high-performance TSCT-TADF emitters, significantly advancing the molecular-level understanding of through-space interactions and accelerating the discovery of tailored, efficient OLED materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010603
The global production, inventory, and retirement of lithium-ion batteries are increasing, while new technologies and materials for safety introduce various binders, lithium salts, flame retardants, and solvents, some of which may be emerging pollutants (EPs). This study identifies 43 EPs across 6 categories in the entire life cycle of lithium-ion battery production. Electrolytes contain the most EPs, including per- and polyfluoroalkyl substances (PFASs) lithium salts and solvents, as well as organophosphorus flame retardants. Production emissions of 1,3-butadiene (1,3-BD), dichloromethane (DCM), and N-methylpyrrolidone (NMP), and release of ultra-short-chain PFASs such as bis(trifluoromethylsulfonyl)imide (NTf2) and trifluoromethanesulfonamide (TfNH2) from discarded batteries require attention. Health risk assessments at production and disposal sites show that DCM poses the highest carcinogenic risk at production sites, exceeding the EPA's basic carcinogenic risk value of 1×10−6 but below the critical value of 1×10−4, with non-carcinogenic risk below the EPA threshold of 1. At disposal sites, tris(1,3-dichloro-2-propyl)phosphate (TDCPP) poses the highest carcinogenic risk, below 1×10−6, while tri(2-chloropropyl)phosphate (TCPP) exhibits the highest non-carcinogenic risk, below 1. Comparison of domestic and international regulations highlights gaps in domestic regulations. Recommendations include tiered management of similar-function chemicals, research on alternatives for high-risk chemicals, implementation of clean production mechanisms, establishment of green product standards, and development of guidelines for managing EPs. This study comprehensively summarizes EPs in the lithium-ion battery life cycle, providing technical support for their management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604009
Biological nitrogen removal in wastewater treatment plants (WWTPs) is often limited by insufficient influent carbon sources, necessitating external carbon addition to enhance denitrification. Conventional single carbon sources, such as sodium acetate, frequently fail to meet the metabolic demands of complex microbial communities, compromising nitrogen removal efficiency and stability. Composite carbon sources, by providing multiple electron donors, can improve metabolic cooperation among microorganisms, yet their underlying microbial mechanisms remain insufficiently understood. In this study, activated sludge from a municipal WWTP was used to investigate the microbial mechanisms of composite carbon sources during denitrification. Batch denitrification experiments were conducted in combination with metagenomic and metatranscriptomic analyses to systematically characterize microbial community structure and functional gene expression under different carbon source conditions. Results showed that, compared with sodium acetate as the single carbon source, the composite carbon source system (sodium acetate: sodium succinate: ethanol = 2:1:3) increased the denitrification rate from (6.822 ± 0.141) mg/(L·h) to (8.370 ± 0.186) mg/(L·h), representing a 22.7% improvement, while reducing N2O accumulation by approximately 55%. Metagenomic analysis revealed that Ottowia, Rubrivivax, Thauera, and Zoogloea were the dominant denitrifying genera. Metatranscriptomic results further demonstrated that the composite carbon sources significantly upregulated the transcription of key denitrification genes, with nirS, norB, and nosZ increasing by 37.8%, 27.4%, and 48.6%, respectively. In addition, the composite carbon sources promoted complementary carbon metabolic strategies among different microbial communities, enhancing electron donor supply and improving denitrification efficiency. These findings indicate that composite carbon sources synergistically enhance denitrification performance through regulation of functional gene transcription in complex microbial communities, providing a theoretical basis for carbon source optimization in WWTPs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3930-3
Methylammonium lead tribromide (MAPbBr3) single crystals (SCs) are promising for room-temperature gamma-ray and X-ray detection, but scaling their size often compromises crystal quality. Here, we report a strategic precursor stoichiometry engineering approach to grow inch-sized, high-quality MAPbBr3 SCs via a constant-temperature evaporation method. We show that constructing a robust electrical double layer through organic cation modulation effectively stabilizes the colloidal precursor. This is achieved by synergistically suppressing MA+ deprotonation while promoting MA+ adsorption as counterions on the [PbBrn]2−n complexes, which collectively strengthens interparticle repulsion and raises the nucleation barrier. This multifaceted approach yields MAPbBr3 SCs with lateral dimensions up to 2 inches and an exceptional X-ray diffraction rocking curve full width at half maximum (FWHM) of 0.0093° at the (002) face. Consequently, the SCs enable spectroscopic-grade gamma-ray detection, achieving energy resolutions (ER) of 8.4% for the 57Co source (122 keV) and 11.1% for the 137Cs source (662 keV), along with a high X-ray sensitivity of 1.65 × 10^4 μC Gy−1 cm−2. This work paves the way for the practical application of MAPbBr3 SCs in high-performance gamma-ray and X-ray detection.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61102-X
Silicon-carbon composites prepared by chemical vapor deposition (CVD) are promising anode materials for high-energy-density lithium-ion batteries. However, the influence of the pore structure of the porous carbon (PC) carrier on silicon deposition behavior, and the impact of surface silicon on cycling stability, remain unclear. This study systematically investigates these effects using nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Porous carbons with varying pore architectures were synthesized by adjusting KOH activator ratios. Results show that increased micropore volume facilitates higher silicon mass loading, but also elevates the content of surface floating silicon due to greater silane exposure. Moderately increasing mesopores in high-microporosity carbon promotes deeper silicon deposition, reducing surface floating silicon. Excessive surface floating silicon hinders lithium-ion diffusion kinetics, leading to accumulation of active lithium, accelerated SEI growth, and electrode degradation. Electrochemical testing reveals that the optimized silicon-carbon composite maintains a high specific capacity of 693.1 mAh/g after 150 cycles at 0.5 C (900 mA/g). This work provides new insights into the development and failure mechanisms of CVD-derived silicon-carbon composite anodes, emphasizing the critical role of pore structure in mitigating surface silicon and enhancing cycling stability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3976-x
The discovery of high-temperature superconductivity in bilayer nickelate La3Ni2O7−δ (La-327) under high pressure and in thin films at ambient pressure has opened new avenues in superconductivity research. However, La-327 exhibits a narrow phase stability range, leading to stacking faults that suppress bulk superconductivity. Chemical substitutions, particularly at the A-site with smaller rare-earth ions, have been shown to enhance phase purity and reduce stacking faults, while also increasing the orthorhombic distortion and chemical pressure. In this work, we apply the high-entropy (HE) strategy to stabilize the 327 phase with reduced average A-site ionic radius (rA). We successfully synthesized medium-entropy La1.2Pr0.6Nd0.6Sm0.6Ni2O7−δ (ME-327) and high-entropy La0.67Pr0.67Nd0.67Sm0.33Eu0.33Gd0.33Ni2O7−δ (HE-327) polycrystalline samples. These compositions satisfy medium- and high-entropy criteria, with rA values of 1.181 Å and 1.164 Å, respectively. The samples are phase-pure and homogeneous. HE-327 exhibits the lowest cell volume, largest orthorhombicity, and shortest interlayer Ni-Ni distance among reported bilayer nickelates. Physical property measurements reveal low electrical conductivity and a high density-wave (DW) transition temperature. Under high pressure, HE-327 shows a resistivity anomaly at 103 K under 31 GPa, suggesting a possible superconducting transition. Extrapolation indicates that Tc under high pressure exceeds 100 K for HE-327, correlating with reduced rA and enhanced interlayer coupling. Our results demonstrate the ionic size effect and the effectiveness of the HE approach in stabilizing bilayer nickelates, providing a new avenue for developing superconducting materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032401
Diazepam (DZP), a benzodiazepine anxiolytic drug, has been a persistent contaminant in fishery water environments. In China, DZP is classified as a veterinary drug that must not be detected in animal-derived foods, yet it is frequently found in aquatic products, posing significant risks to ecological health and food safety. This review systematically summarizes the current pollution status of DZP in fishery water and its adverse effects on aquatic organisms, emphasizing its persistence in both water and aquatic products. The paper comprehensively examines advances in detection techniques, including gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS), as well as treatment technologies such as adsorption, photolysis, chemical oxidation, and biodegradation. Critical gaps remain in the integration of these technologies for practical remediation. The review underscores the urgent need for enhanced monitoring and risk assessment of DZP contamination, alongside the development of more efficient and scalable treatment methods. By consolidating current knowledge, this work provides technical support for aquatic organism protection and fishery water management, and serves as a reference for future research and technological innovation in this field.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031304
The Qingling River, a representative silicate rock catchment in the upper Yangtze Basin, is vital for agricultural productivity in central Yunnan. To investigate its hydrochemical characteristics, river water samples were systematically collected during both dry and wet seasons. Employing hydrochemical diagrams, statistical analysis, and absolute principal component score-multiple linear regression (APCS-MLR) modeling, we identified influencing factors and their contributions to water chemistry and evaluated irrigation suitability. Results showed that pH ranged from 7.36 to 9.18 in dry season and 7.12 to 8.92 in wet season, with total dissolved solids (TDS) varying between 119–2684 mg·L−1 and 125–2342 mg·L−1, respectively. Dominant cations were Ca2+ and Na+, while anions were primarily SO4^2− and HCO3^− in both seasons; notably, SO4^2− concentrations significantly exceeded the Yangtze River Basin’s average. Hydrochemical types varied seasonally: HCO3·SO4-Ca·Mg and HCO3·SO4-Ca dominated in dry season, whereas HCO3·SO4-Ca·Na, HCO3·SO4-Ca·Mg, and HCO3-Ca prevailed in wet season. The river water was affected by five factors: sulfuric acid-dominated water-rock interactions, carbonic acid-dominated water-rock interactions, domestic sewage discharge, agricultural non-point source pollution, and unknown sources. Contribution rates were 47.90%, 24.80%, 16.98%, 2.40%, and 7.92% in dry season, and 28.23%, 28.94%, 27.48%, 2.02%, and 13.34% in wet season, respectively. Water-rock interactions emerged as the primary control on hydrochemistry. While most samples were suitable for irrigation, a few exhibited high salinity, warranting cautious use. This study provides scientific support for irrigation water resource management and safe utilization in the Qingling River Basin.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040701
Goaf water (GW), formed by water accumulation in coal mine goafs, poses ecological risks due to its pollutant content. While previous studies focused on physicochemical properties, microbial community dynamics and their effects on plants remain underexplored. Maize (Zea mays L.) is sensitive to water quality changes, making it a suitable model for ecological risk assessment. This study investigated GW samples from a coal mine in Yangquan, Shanxi Province, using metagenomic sequencing to analyze microbial communities and maize seed cultivation experiments to evaluate growth effects. Results demonstrated that GW significantly inhibited maize growth, particularly lower-depth samples. Microbial diversity and composition varied markedly with depth; lower-depth GW enriched distinct microbial species potentially influencing plant growth. These microbes may regulate plant development through metabolic pathway modulation. The study elucidates the complex impacts of GW microbial communities on plant growth and emphasizes their importance in ecological risk assessment of GW.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510017
Municipal solid waste (MSW) is a significant source of urban carbon emissions. This study integrates life cycle assessment (LCA) and system dynamics (SD) to construct a multi-subsystem LCA-SD model covering economy, population, waste generation, transportation, treatment, and resource utilization, using Fuzhou City as a case study. The model was validated against historical data and uncertainty analysis. Carbon emissions from MSW transportation, treatment, and resource utilization during 2013–2023 were calculated, and emission trends under seven reduction scenarios for 2024–2035 were predicted. Results show that Fuzhou's MSW treatment evolved through three stages: 'landfill+incineration', 'treatment structure adjustment', and 'incineration+kitchen waste resource utilization', corresponding to emission growth, fluctuation, and reduction periods. In 2023, total net carbon emissions were 1.07×10^6 t CO2-eq, with incineration being the largest contributor (9.93×10^5 t), followed by transportation (2.93×10^4 t), leachate treatment (2.14×10^4 t), and kitchen waste treatment (7.90×10^3 t, negative emission). Scenario analysis indicates that without further measures, carbon neutrality cannot be achieved. Synergistic enhancement of kitchen waste separation and incineration power generation efficiency can significantly boost reduction, potentially achieving carbon neutrality by 2032. The study provides a dynamic accounting and scenario assessment framework for low-carbon transition of urban solid waste systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012605
Synthetic phenolic antioxidants (SPAs) are widely used, leading to environmental contamination and human exposure. However, studies on their effects on adipocyte differentiation and underlying mechanisms, particularly for emerging SPAs, are limited. This study evaluated the impacts of 4-tert-octylphenol (4-t-OP) and three novel antioxidants (AO 3114, AO 1135, AO 702) on adipogenesis using the mouse 3T3-L1 preadipocyte differentiation model. Lipid staining, triglyceride measurement, differentiation-related gene expression analysis, and transcriptomic approaches were employed. All four SPAs significantly promoted differentiation of 3T3-L1 cells into mature adipocytes and upregulated expression of peroxisome proliferator-activated receptor gamma (Pparγ) and mature adipocyte marker genes. Transcriptomic analysis revealed differential effects on gene transcription during early differentiation. GO and KEGG enrichment analyses indicated that these SPAs promoted adipogenesis by enhancing energy metabolism and protein synthesis, as well as regulating PPAR and other signaling pathways. In conclusion, the tested SPAs promote adipogenesis and disrupt lipid metabolism through distinct mechanisms, suggesting long-term exposure may cause metabolic disorder risks and pose a public health threat.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4039-1
Immunosuppressive metabolites are major drivers of tumor immune suppression. Among these, kynurenine (Kyn) is produced through the catalysis of tryptophan (Trp) 2,3-dioxygenase (TDO) in hepatocellular carcinoma. However, TDO inhibition alone is often insufficient because residual pathway flux sustains the accumulation of the downstream immunosuppressive metabolite quinolinic acid (QA). Here, we propose a strategy to disrupt residual kynurenine pathway activity to enhance metabolism-driven tumor immunotherapy. We develop acid-responsive metal-organic complex nanoparticles (APAP@TDOi-Zn, ATZn) that integrate the TDO inhibitor (TDOi) and Zn2+, while encapsulating acetaminophen (APAP) to inhibit 3-hydroxyanthranilate 3,4-dioxygenase (HAAO), thereby limiting QA production and simultaneously suppressing the residual immunosuppressive metabolite. QA suppression limits M2 macrophage polarization, whereas Kyn inhibition and Zn2+ supplementation promote T cell proliferation and cytotoxicity. Consequently, ATZn rewires Trp-Kyn metabolism and augments antitumor immunotherapy. This work enhances the efficacy of metabolic checkpoint blockade and provides a strategy to overcome metabolism-driven immune resistance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4150-2
Bacterial infection and irregular wound morphology are major challenges in clinical wound management. Injectable hydrogels can conform to irregular wound geometries but often lack antimicrobial activity. Here, we report an injectable hydrogel (HPAu gel) formed by sequentially mixing phenylboronic acid-modified hyaluronic acid (HA-PBA) and chloroauric acid under alkaline conditions. The gel's internal multiple crosslinks enable uniform encapsulation of in situ-generated gold nanoparticles. Hydrogen bonds and phenylboronic acid ester bonds confer self-healing, injectability, and adhesion, allowing effective sealing of irregular cavities. In vitro, the hydrogel exhibits long-lasting photothermal stability and eliminates multiple bacterial strains. In a mouse dorsal full-thickness infected wound model, HPAu gel under near-infrared (NIR) irradiation eradicated Staphylococcus aureus, reduced inflammation (TNF-α fluorescence area significantly lower; IL-10 area 12.88‰ vs <2‰ in Blank), promoted vascular regeneration (CD31 and α-SMA expression increased), and accelerated wound healing. This work presents a promising strategy for treating irregular infected wounds.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3379-7
Aerogel fibers are promising for personal thermal management textiles, but conventional wet-spun fibers suffer from a dense skin layer that compromises the balance between thermal insulation and mechanical robustness. This highlight examines a microfluidic spinning strategy that constructs gradient all-nanostructure aramid aerogel fibers (GAFs). By employing DMSO as a sheath fluid, the process induces a hydrodynamic concentration gradient, protonation-driven sol-gel transition, and supercritical drying-mediated structural inversion, yielding a porous gradient architecture distinct from traditional skin-core aerogel fibers (SAFs). Raman mapping of the aramid I band (1610 cm⁻¹) confirms the structural difference. The GAFs exhibit optimized thermal resistance and mechanical performance, addressing the trade-off that limits conventional aerogel fibers. The referenced work (Nat Commun, 2025, 16: 2357) demonstrates a viable route to high-performance aerogel fibers for next-generation thermal management, with potential for scalable manufacturing and enhanced energy efficiency in textiles.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3537-3
Thick-film organic solar cells (OSCs) are indispensable for scalable manufacturing, yet they suffer from severe energy loss and complex morphology control. This study reports the synthesis of a fluoropolymer PF8 and its integration with fluorous solvent vapor annealing (FSVA) post-treatment to fabricate high-performance thick-film OSCs. The fluorination strategy and FSVA process synergistically enhance polymer crystallinity and induce an intrinsic fibrous morphology. The FSVA-treated PF8:L8BO device with a 110 nm active layer achieves a power conversion efficiency (PCE) of 18.89%. At film thicknesses of 300 nm and 500 nm, the devices retain high efficiencies of 17.54% and 15.59%, respectively. The 300-nm FSVA-treated blend films exhibit enhanced packing order and well-defined fibrillar morphology, leading to suppressed non-radiative recombination and efficient charge transport along the fiber network. This work demonstrates the potential of combining fluoropolymers with fluorous solvent-based device engineering for advanced thick-film optoelectronic applications, providing a viable pathway for scalable OSC manufacturing.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3540-y
Polymeric multicolor afterglow materials with tunable phosphorescence and environmental adaptability remain a bottleneck in optical anti-counterfeiting. This work integrates triplet-to-singlet Förster resonance energy transfer (TS-FRET) with ultraviolet (UV) laser direct writing to fabricate phosphorescent anti-counterfeiting labels. Using poly(acrylamide-co-4'-vinyl-[1,1'-biphenyl]-3,5-dicarboxylic acid) (BCA2PAM) as the donor and rhodamine 6G (R6G) as the acceptor, precise color tuning is achieved. Time-resolved multicolor displays are realized by loading afterglow materials onto filter paper, while luminescent elastomers are synthesized via integration with polydimethylsiloxane (PDMS). Laser inscription of 'disappear' on R6G-doped BCA2PAM films at varying laser powers yields exclusive visibility of 'appear' under UV irradiation; upon UV off, 'disappear' emerges, followed by reappearance of 'appear' after 1 s, demonstrating encryption efficacy. High-power laser-inscribed QR codes remain imperceptible under UV but become visible after simulated breath exposure and subsequent UV activation. Integrated with polyethylene terephthalate (PET) adhesive tapes, the films form tamper-evident labels with customizable branding. Laser-written patterns visible under UV can be erased under ambient humidity and re-encrypted with new motifs, exhibiting rewritable capability. These results provide a new method based on ultraviolet light and multicolor time-resolved coupling in optical encryption, demonstrating industrial production potential for high-end anti-counterfeiting labels.