SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4505-9
Transition metal hydroxides are promising oxygen evolution reaction (OER) catalysts for alkaline water electrolysis. This study reports Ce-doped Co(OH)2 electrocatalysts synthesized via one-step electrodeposition, where the Ce3+/Ce4+ ratio is precisely controlled by deposition temperature. The optimized Ce-Co(OH)2 catalyst, obtained at 40°C, exhibits an overpotential of 236 mV at 10 mA cm-2 and maintains stability for 200 h. In an anion-exchange membrane water electrolyzer (AEMWE), the Ce-Co(OH)2 anode achieves a cell voltage of 2.04 V at 1 A cm-2 and operates for over 500 h at 500 mA cm-2. Mechanistic analysis reveals that Ce3+/Ce4+ dynamic electron buffering regulates surface reconstruction: during OER, electron transfer direction reverses (Ce → O → Co), with Ce donating electrons to Co sites to prevent over-oxidation and structural collapse. This work establishes a versatile strategy for balancing surface reconstruction and structural stability in Co-based OER catalysts, providing a foundation for designing high-performance, durable alkaline water oxidation electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4328-2
Laser-driven broadband near-infrared (NIR) light sources are highly desirable for diverse non-visible optical applications. However, conventional phosphor-in-silicone converters will be rapidly invalidated under high-power laser excitation, and the poor structural stability of Cr3+ activated gallate/germanate phosphors makes them prone to interfacial reaction with silicate glass, leading to substantial deterioration in luminescence properties of phosphor-in-glass film (PiGF) converters. Herein, we report an efficient and stable ultrabroadband NIR PiGF with a high internal quantum efficiency of ≈ 94%, a long peak wavelength of 850 nm and an ultra-large full width at half maximum of 300 nm. The detrimental interfacial reactions with glass matrix are effectively suppressed by embedding the Cr3+ activated superstoichiometric MgO·1.75Al2O3 phosphor, which is attributed to the superior high-temperature structural stability of the aluminate spinels. Through effective thermal management by the sapphire plate and further a motor-driven rotating wheel, a high-performance laser-driven light source is further demonstrated, which can deliver high-brightness ultrabroadband NIR light with an output power exceeding 1.1 W, a light conversion efficiency of 26%, and a stable operation for over 15 hours. Our work provides an efficient, stable and cost-effective all-inorganic converter for the development of laser-driven NIR light sources.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4476-1
Self-sustained oscillation in soft actuators enables autonomous, untethered robotic locomotion, yet existing light-driven systems suffer from low oscillation frequencies, rapid photothermal degradation, and reliance on external controllers. This work presents a bat-inspired soft robot that converts continuous near-infrared (NIR) irradiation into sustained rotational motion via a coiled MXene-based liquid crystal elastomer (LCE) actuator. The actuator integrates Ti3C2Tx MXene nanosheets as photothermal converters within an LCE matrix, achieving a photothermal conversion efficiency of 78.3% and a steady-state temperature of 142 °C under 1.5 W cm−2 NIR (808 nm). The coil geometry induces a self-shadowing effect that generates periodic light exposure, producing autonomous oscillation at 2.7 Hz with an amplitude of 45°. The robot demonstrates a rotational speed of 120 rpm and a specific power density of 3.2 W kg−1, outperforming previously reported light-driven oscillators by a factor of 2.5. Under continuous operation for 10,000 cycles, the actuator retains 92% of its initial oscillation amplitude, with a degradation rate of 0.008% per cycle. The bat-inspired wing morphology enables directional rotation and obstacle avoidance in confined spaces. This platform eliminates the need for external modulation, offering a scalable route to autonomous soft robotics for inspection, environmental monitoring, and micro-manipulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4420-7
Cu2-xSe is a leading p-type thermoelectric material owing to its phonon-liquid electron-crystal (PLEC) behavior, yet the atomic-scale mechanisms governing Cu+ migration remain unresolved. This study employs in situ high-resolution neutron diffraction coupled with maximum entropy method (MEM) analysis to map the temperature-dependent evolution of Cu+ nuclear density in β-Cu2Se and β-Cu1.95Se. At 398–423 K, intra-tetrahedral Cu 8c ↔ 32f <111> hopping emerges, with isosurface values of 0.505 fm Å-3 for β-Cu2Se and 0.484 fm Å-3 for β-Cu1.95Se. Above 448 K, inter-tetrahedral pathways form via Cu 32f ↔ 32f <100> or 32f ↔ 4b ↔ 32f <111> migration, as revealed by line scans along [1̅11̅] up to 723 K. The presence of Cu vacancies (x = 0.05) alters the onset and connectivity of these pathways, directly impacting phonon scattering and electron transport. These findings establish a structural basis for controlling Cu+ mobility, offering a rational route to mitigate Cu precipitation and enhance zT stability beyond 1.5 at 900 K. The work bridges microstructural dynamics and thermoelectric performance, providing critical guidance for defect engineering in superionic thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4490-y
The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4309-8
Iridium-doped cobalt oxide nanosheets derived from a ZIF template were evaluated as oxygen evolution reaction (OER) catalysts for proton exchange membrane water electrolysis (PEMWE). Residual carbon was removed via a post-synthetic treatment to isolate intrinsic catalytic behavior. The Ir0.23Co0.77Ox catalyst exhibited enhanced activity and durability relative to commercial IrO2 in a practical PEMWE device. Potential-dependent, stage-resolved characterization combined with theoretical calculations probed catalyst stability under different operating voltages, revealing degradation mechanisms tied to applied potential. Contact angle measurements showed that the Ir0.23Co0.77Ox membrane electrode assembly (MEA) had water and air contact angles of 126° and 143°, respectively, compared to 126° and 143° for an IrO2 MEA at identical Ir loading, indicating improved wettability and gas release behavior. The work provides a framework for understanding potential-dependent stability in acidic OER catalysts and demonstrates a viable route to reduce Ir loading while maintaining PEMWE performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4112-6
Radiostrontium remediation is crucial for ecological protection and sustainable development of nuclear energy. However, efficient removal of 90Sr from complex radioactive liquid waste, especially under acidic conditions, remains challenging due to material instability and intense proton competition. Herein, the rapid and highly selective capture of Sr2+ in neutral and even acidic solutions has been achieved by a layered potassium phosphatoantimonate KSbP2O8 with excellent radiation and thermal stability. Under neutral conditions, it possesses high maximum adsorption capacity (qmSr = 110.25 mg g−1), rapid adsorption kinetics (the removal rate (RSr) of 91.54% within 30 min), and excellent selectivity for Sr2+, and facile regeneration. Particularly, even under acidic conditions (pH 2.0), KSbP2O8 still maintains excellent Sr2+ removal capacity (qmSr = 79.38 mg g−1), fast kinetics, and high selectivity. A mechanism study by multiple characterizations reveals that the efficient Sr2+ removal of KSbP2O8 mainly stems from ion exchange between Sr2+ and interlayer K+ in KSbP2O8, which is attributed to the synergy between the Sb5+-induced Brønsted acidity and the high charge density of the anionic framework. This study demonstrates the exceptional capability of phosphatoantimonates to selectively capture Sr2+ under acidic conditions, highlighting the potential of phosphatoantimonates as effective scavengers for radiostrontium remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3669-1
Halide perovskite light-emitting diodes (PeLEDs) have advanced rapidly due to their high photoluminescence quantum yield, tunable bandgap, and color purity. However, conventional perovskites exhibit small exciton binding energies, which weaken radiative recombination and limit external quantum efficiency (EQE). Strong spatial confinement strategies, such as thin films, small grains, or quantum-confined structures, have boosted EQE beyond 20% but introduce Auger recombination and ion migration, causing efficiency roll-off and instability. This commentary highlights a novel approach by Xiao et al. (Nature, 2025) that employs weakly space-confined all-inorganic CsPbBr3 perovskites, synthesized using sacrificial additives hypophosphorous acid (HPA) and ammonium chloride (NH4Cl). This method yields highly oriented monocrystalline domains exceeding hundreds of nanometers with no observable grain boundaries, contrasting with control films (submicrometre grains with abundant boundaries) and strongly confined systems (~20 nm crystallites with organic ligands). The reduced grain boundaries lower defect density and block ion migration, while controlled crystallization suppresses vacancies and lattice distortions, enhancing carrier mobility and raising the ion migration energy barrier. The strategy achieves record-breaking performance and stability, addressing EQE roll-off and operational lifetime limitations. This approach offers a versatile framework for other all-inorganic perovskite systems, advancing PeLEDs toward practical high-brightness displays and lighting.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61072-4
Sodium-ion capacitors (SICs) typically feature a hybrid design, incorporating a battery-type anode that operates by faradaic redox reactions and an activated carbon cathode that functions through electrical double-layer (EDL) adsorption/desorption. However, the kinetics of faradaic processes are inherently slower than those of EDL processes, leading to a fundamental problem known as kinetic imbalance between the electrodes, which hinders the development of high-performance SICs. To address this, we synthesized composites of bismuth nanoparticles in N-doped carbon (Bi@NC) by a high-temperature sintering method. The resulting Bi@NC anode has a specific capacity of 300 mAh g−1 at 0.5 A g−1, an exceptional rate capability (maintaining performance at currents exceeding 75 A g−1), and outstanding cycling stability over 12,000 cycles. Three-electrode Swagelok cell tests revealed that this high-rate Bi@NC composite effectively decreases the kinetic gap with the activated carbon cathode, as shown by an analysis of their respective potential swing windows (vs. Na/Na+). This enables the fabricated SIC to achieve a maximum energy density of 115 Wh kg−1, a peak power density of 45,535 W kg−1, and a long cycle life exceeding 8,000 cycles.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025110501
Ultrashort-chain perfluoroalkyl substances (PFAS) exhibit high hydrophilicity, mobility, and root concentration factors, facilitating their transport and accumulation in soil-crop systems and posing phytotoxicity risks. Post-drought rehydration (PDR) is a critical water management strategy to mitigate drought effects in paddy fields. This study investigated the regulation and mechanisms of PDR on ultrashort-chain PFAS transport in paddy soils through sterilized and non-sterilized experiments, employing three-dimensional fluorescence spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray fluorescence spectroscopy, and amplicon sequencing. Results showed that PDR increased the bioavailable fraction of ultrashort-chain PFAS in soil solution while delaying their release into overlying water. Sterilization experiments confirmed that PDR-induced compensatory migration was primarily driven by microbial activity. Geochemical analyses revealed that PDR reduced hydrophilic functional groups (e.g., hydroxyl) on soil particle surfaces and increased cation bridging sites. Microbiological sequencing indicated that PDR activated secondary metabolic pathways, enhancing microbial extracellular polymeric substances (EPS) production, which provided binding sites for ultrashort-chain PFAS. Consequently, EPS competed with soil particles for cation bridging, altering PFAS interfacial partitioning and increasing bioavailable and cation-complexed fractions in soil solution, thereby exacerbating rhizosphere exposure risk to rice. This study elucidates the coupled geochemical and microbiological mechanisms governing ultrashort-chain PFAS mobility under PDR, informing risk assessment and management in paddy agroecosystems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011804
Per- and polyfluoroalkyl carboxylic acids (PFCAs) are persistent organic pollutants whose isomers exhibit distinct environmental behaviors, bioaccumulation potentials, and toxic effects due to structural variations. Accurate identification of PFCA isomers is critical for risk assessment and pollution control, yet existing detection methods predominantly rely on standard references, posing challenges for precise analysis of isomers with subtle structural differences. Single-molecule electrochemical sensing via nanopores offers a standard-free approach by correlating molecular volume with current blockade, but its capability to distinguish PFCA isomers remained unverified. This study targeted three sets of PFCA isomers: 4,5,5-trifluoropent-4-enoic acid vs. 4,4,4-trifluoro-3-methylbut-2-enoic acid; 3,3,3-trifluoro-2-methylpropanoic acid vs. 4,4,4-trifluorobutanoic acid; and 2-(trifluoromethoxy)acetic acid, 3,3,3-trifluorolactic acid, and (2R)-3,3,3-trifluoro-2-hydroxypropanoic acid. By engineering nanopore interfaces (WT, R220N, R220Q Aerolysin) and extracting multi-dimensional characteristic parameters, the method achieved near 100% accuracy in identifying all seven isomers. Feature selection further enabled high classification accuracy with low data volumes, laying the foundation for rapid single-molecule detection of PFAS and other emerging contaminants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3802-0
Exploring efficient bifunctional electrocatalysts for both hydrogen and oxygen evolution reactions is key to water electrolysis. However, the inherently slow reaction kinetics of electrocatalysis are constrained by mass transfer limitations and unsuitable adsorption/desorption dynamics. Herein, a Fe-doped-Ni3S2/NiFeCoCeIn oxide hydroxide (FNS/HEOXY) crystalline–amorphous heterostructure electrocatalyst with a large work function difference (ΔΦ) and strong built-in electric field (BEF) is successfully designed and synthesized. Benefiting from the electron transfer behavior from FNS to HEOXY, the FNS/HEOXY shows outstanding catalytic activity for both hydrogen and oxygen evolution, along with ultra-high stability in an alkaline medium at an industrial-level current density. Moreover, the anion exchange membrane water electrolyzer (AEMWE) assembled by the FNS/HEOXY requires only a minimal cell voltage of 1.83 V to reach 1 A cm−2 at 80 °C. Both experimental and theoretical results confirm the interfacial charge redistribution induced by the strong BEF, thus finely optimizing the adsorption energy. This work proposes a new design principle toward efficient electrocatalysts for energy conversion.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510039
The shipping industry's carbon emissions have drawn increasing attention. This study quantifies the carbon footprint of ship supply chains across their life cycle to identify key emission stages and reduction potentials, promoting green transformation. Based on life-cycle theory and using process analysis, a carbon footprint assessment model was constructed covering raw material acquisition, construction and assembly, transportation and distribution, and scrapping and recycling. The model was applied to a case ship, followed by multi-scenario and sensitivity analyses. Results show that the transportation and distribution stage is the dominant source of positive emissions, accounting for 88.73% of the total, while the scrapping and recycling stage provides a carbon offset benefit of 6.77%. Among five emission reduction scenarios—low-carbon materials, green energy, green logistics, circular economy, and comprehensive low-carbon—the reduction efficiencies are 2.02%, 0.06%, 18.44%, 0.42%, and 20.95%, respectively, indicating that green logistics is the core pathway for decarbonizing ship supply chains. Under the green logistics scenario, optimizing the LNG carbon emission factor yields more significant reduction effects. This study provides a life-cycle perspective on the carbon footprint structure of ship supply chains, offering theoretical references for identifying key reduction links and optimizing low-carbon technology pathways.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0031
The high-temperature behavior of biomass ash critically influences gasifier operational efficiency. This study investigates the differential high-temperature behaviors of corn straw ash (CSA) and wheat straw ash (WSA) using an intelligent ash fusion analyzer, high-temperature rotating viscometer, X-ray diffraction (XRD), SEM-EDS, and FactSage thermodynamic simulations. Both ashes contain high K2O (>30%) and exhibit flow temperatures below 1300 °C. Despite higher K2O and lower SiO2, CSA exhibits a higher flow temperature (1241 °C) than WSA, attributed to elevated CaO (10.39%) and MgO (7.33%) that promote formation of high-melting silicates (K2MgSiO4, K2Ca2Si2O7, CaSiO3). In contrast, WSA with lower CaO (4.92%) and MgO (2.82%) tends to form low-melting potassium silicates. At high temperatures, both slags are typical crystalline slags, with viscosity rising sharply below a critical temperature. For CSA, rapid nucleation and coarsening of silicate crystals (e.g., KAlSiO4 grain size increases from 20.5 nm at 1350 °C to 192.9 nm at 1050 °C) cause abrupt viscosity increase. For WSA, a high P2O5 content (10.05%) induces a 'chemical dilution effect', leading to persistent KAlSiO4 during cooling and elevated viscosity, especially at the final cooling stage. This study elucidates how ash chemical composition governs high-temperature phase equilibrium and non-equilibrium kinetics, thereby macroscopically affecting ash fusion and rheological behavior, providing a theoretical basis for deeper understanding of biomass ash high-temperature characteristics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022102
Organophosphate pesticides (OPs), the most extensively used insecticides globally, are ubiquitous in environmental matrices and agricultural products, leading to widespread human exposure. This systematic review evaluates the impact of OP exposure on pregnancy complications and adverse birth outcomes, synthesizing evidence from 58 epidemiological studies published between January 2001 and July 2024. Exposure assessment methods, including biomarkers such as urinary dialkyl phosphates, are critically examined. The review finds significant associations between OP exposure and increased risks of spontaneous abortion, gestational diabetes mellitus, gestational hypertension, preeclampsia, preterm birth, and adverse birth outcomes such as low birth weight and reduced head circumference. Potential mechanisms include paraoxonase 1 (PON1) genotype polymorphisms affecting detoxification capacity, oxidative stress, inflammation, metabolic disruption, and altered placental gene networks. The review highlights inconsistencies across studies due to variability in exposure assessment, timing, and population susceptibility. Future research should prioritize longitudinal designs, repeated biomarker measurements, and consideration of PON1 genetic variants to clarify causal relationships and susceptible windows. This comprehensive synthesis provides critical insights for regulatory policies and clinical interventions aimed at mitigating maternal and child health risks from OP exposure.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026011902
The migration of perfluoroalkyl and polyfluoroalkyl substances (PFASs) at the water–soil interface in paddy fields is a critical determinant of their environmental fate and crop safety. This study investigated the influence of low-molecular-weight organic acids (LMWOAs) on PFASs mobility under waterlogged conditions. Four LMWOAs—oxalic, citric, lactic, and acetic acids—were individually enriched in paddy soils, and the migration of 15 PFASs was monitored. Acetic acid enrichment most strongly suppressed PFASs release into overlying water. Mechanistic analyses using X-ray photoelectron spectroscopy, three-dimensional excitation–emission matrix spectroscopy, microbial amplicon sequencing, and metagenomics revealed that acetic acid reshaped the microbial community, enriching sulfate-reducing bacteria and upregulating sulfur reduction genes (SULT1A) and nitrogen transformation genes (nifN, nirI, nthB). This drove sulfate reduction to sulfite and sulfide. ABT modeling identified sulfur metabolism as the dominant factor controlling PFASs immobilization (26.06% contribution). Experiments under varying sulfur redox conditions confirmed that sulfite (SO3^2−) oxidation indirectly altered dissolved organic matter (DOM) composition, weakening PFASs–DOM binding and reducing PFASs in overlying water. These findings demonstrate that LMWOAs accumulation, particularly acetic acid, can effectively impede PFASs migration at the paddy water–soil interface via microbial sulfur cycling and associated DOM structural changes, offering a potential strategy for PFASs remediation in agricultural systems.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509031
This study establishes a carbon footprint calculation method and an environmental benefit assessment model for the dismantling process of waste televisions (TVs) based on life cycle assessment (LCA). Activity data on energy consumption and material flows were collected from typical treatment enterprises via field investigation. The ReCiPe 2016 model was applied to quantify midpoint and endpoint environmental impacts. Results show that the dismantling and recycling process yields net environmental benefits in most impact categories. At the midpoint level, significant reductions were observed in fossil resource scarcity (−26,494.23 kg oil eq), freshwater ecotoxicity (−2.21×10^4 kg 1,4-DCB), and greenhouse gas emissions (−956.53 kg CO2 eq). At the endpoint level, reductions in human health damage (−1.59×10^4 DALY), ecosystem damage (−2.35×10^4 species·yr), and resource depletion costs (−4.22×10^4 USD) were achieved. Carbon footprint analysis indicates that the carbon footprint per TV ranges from 0.231 to 0.247 kg CO2 eq per unit, with electricity consumption as the dominant emission source. Sensitivity analysis reveals that electricity consumption significantly influences the carbon footprint. Finally, emission reduction recommendations are proposed from aspects of equipment upgrade and energy management, providing theoretical basis and practical guidance for low-carbon treatment of electronic waste.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026041402
Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants ubiquitously distributed in paddy soils. In paddy management, surface water irrigation introduces quinolone antibiotics (QNs) into the soil, potentially altering PFAS interfacial migration via microbial community shifts. This study investigated the soil-water partitioning of PFAS under irrigation with four QNs (norfloxacin, ciprofloxacin, enrofloxacin, ofloxacin) using UHPLC-MS/MS and soil metagenomics. Results showed that QNs input, especially norfloxacin, significantly promoted the release of short-chain PFAS (e.g., PFBA) from soil to overlying water, while long-chain PFAS remained largely retained in soil. Metagenomic analysis revealed that archaeal and viral communities contributed most to PFAS release. Spearman correlations indicated ammonia-oxidizing archaea (Nitrososphaera) positively correlated with PFBA, whereas Bcep22virus negatively correlated with multiple PFAS. Differential gene expression and co-occurrence networks suggested QNs suppressed key functional genes in archaea and viruses (nitrogen metabolism, secretion systems, outer membrane proteins), reshaping interfacial partitioning and enhancing short-chain PFAS mobility, thereby increasing food security risks.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607006
This study evaluates the global warming potential (GWP) of three typical air pollution control device (APCD) configurations in municipal solid waste (MSW) incineration under ultra-low emission standards. The configurations are APCD1 (SNCR+SDS+DS+ACI+FF), APCD2 (SNCR+SDS+DS+ACI+FF+SCR+WS), and APCD3 (SNCR+SDS+DS+ACI+FF+WS+SCR). Life cycle assessment (LCA) was applied to quantify GWP. Results indicate that APCD3 exhibits the highest GWP due to increased electricity consumption, yet it achieves the lowest pollutant emissions among the three. APCD1 shows the highest NOx emissions, contributing significantly to GWP, and requires technological upgrades. APCD2 consumes more resources but does not proportionally reduce emissions, suggesting inefficiencies. Electricity consumption is the dominant factor influencing GWP across all processes; reducing electricity use and improving energy efficiency are critical for mitigating environmental impact. The study recommends further research on CO2 reduction strategies and adoption of more efficient DeNOx technologies to align MSW incineration with ultra-low emission and low-carbon goals.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3917-x
The escalating global challenge of antibiotic contamination demands advanced sensing technologies for environmental monitoring and public health protection. Here, we present a structurally well-defined, intercalation-engineered metal-organic framework (MOF), HSB-W18, which functions as an ultrasensitive and selective fluorescence sensor for fluoroquinolone antibiotics. Single-crystal X-ray diffraction analysis unambiguously determined both the framework architecture and the spatial organization of intercalated 2,5-dihydroxyterephthalate molecules at atomic resolution. Through ultrasound-assisted synthesis, highly stable book-shaped microsheets (HSB-W18-MS) were obtained, maintaining exceptional aqueous dispersibility and luminescence intensity for over one month. These microsheets offer distinct advantages for antibiotic detection: specific recognition of diverse fluoroquinolones via unique fluorescence signatures; highly sensitive ratiometric detection of enoxacin (ENX) with a limit of detection (LOD) of 5.62 nM and rapid response kinetics (<30 s); exceptional selectivity alongside reusability. Systematic mechanistic investigations revealed a synergistic detection process involving multiple photophysical pathways. Furthermore, a smartphone-based portable detection system was successfully implemented, and the practical utility of the sensor was validated by quantifying ENX in complex environmental samples: tap water LOD = 18.32 nM and river water LOD = 29.87 nM. This study contributes to fundamental materials science and environmental monitoring by elucidating discernible structure-property relationships in intercalated MOFs, demonstrating a robust platform for field-deployable antibiotic detection and proposing an innovative design paradigm for environmental optical sensors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3983-4
Refrigeration is essential for modern society, supporting applications from household appliances and industrial manufacturing to microelectronics and biopharmaceutical cold chains. Conventional refrigeration technologies are constrained by environmental impact and low energy efficiency, emphasizing the importance of developing sustainable alternatives. Solid-state caloric refrigeration, particularly electrocaloric (EC) devices, offers a promising route owing to their high cooling efficiency, rapid electric-field-driven response, and potential for miniaturization. Significant progress has been achieved in various EC device configurations. However, EC devices still face challenges in achieving large temperature spans, high cooling power, and effective integration for specific applications. This review systematically summarizes these developments, focusing on device design and performance enhancement. It elucidates the fundamental and shared design strategies, classifies EC devices into fluid-based heat-transfer type, solid-based heat-transfer type, and thermal-resistance-modulated heat-switch architectures, and analyzes representative device structures, performance metrics, and application scenarios. Finally, energy-recovery strategies and future optimization directions toward more efficient EC systems are discussed. This work provides a comprehensive reference for the design innovation and practical implementation of EC-based solid-state refrigeration technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3950-x
Photocatalytic oxygen reduction reaction (ORR) for hydrogen peroxide (H2O2) production via the two-electron pathway offers an environmentally friendly oxidant and a clean fuel. However, challenges exist in optimal oxygen (O2) adsorption capacities and maintaining O–O bond during O2 activation. Herein, we present a zinc single-atom catalyst (Zn/VN-CN) incorporating nitrogen vacancies (VN), designed to modulate the electronic structure of the photocatalyst, leading to optimized O2 adsorption energy and a remarkable enhancement in H2O2 yield. Benefiting from the synergistic effect between nitrogen vacancies and Zn single atoms, the optimized Zn/VN-CN catalyst exhibits a photocatalytic H2O2 production rate of 2.399 mmol g−1 h−1 under visible-light irradiation, representing a 12-fold enhancement compared to pristine g-C3N4 (CN), along with a high H2O2 selectivity of 87.4%. Combined experimental and theoretical studies indicate that the Zn-N3 sites act as highly active reaction centers, while nitrogen vacancies increase the charge density and downshift the d-band center of the Zn sites, thereby moderating O2 adsorption strength, lowering the activation energy barrier for the formation of *H2O2, and further converting it to H2O2. This work proposes an effective strategy for tuning O2 adsorption behavior to achieve highly selective and active photocatalytic H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3989-4
Organic-inorganic hybrid metal halides (OIMHs) based on Cu(I) ions exhibit broad application prospects in stimulus-responsive luminescent materials due to their rich structural diversity and highly adjustable electronic states. However, achieving sensitive and broad-temperature-range thermal responses remains a significant challenge. Here, we synthesize a zero-dimensional warm white-light emitting OIMH, MPC-W ((C9H20N2O)4(Cu2I4)(Cu2I6)(H2PO2)2), using 4-morpholinopiperidine (4-MP) and CuI. MPC-W features hybrid structures of [Cu2I4]2− and [Cu2I6]4−. The coexistence of three luminescent mechanisms—organic cluster luminescence (CL), self-trapped exciton (STE) emission of [Cu2I6]4−, and cluster-centered (CC) state luminescence of [Cu2I4]2−—endows MPC-W with temperature- and excitation-wavelength-dependent dynamic luminescence. From 77 to 297 K, the luminescence color continuously tunes from blue to cyan, green, yellow-green, and white. In the range of 217–463 K, MPC-W exhibits abnormal luminescence enhancement with increasing temperature. Upon chemical stimuli, MPC-W reversibly transforms into blue-emitting MPC-B ((C9H20N2O)Cu2I4) and yellow-emitting MPC-Y ((C9H18N2O)7Cu8I8). These dynamic luminescent properties position MPC-W for applications in temperature sensing, optical anti-counterfeiting, and password locks. This work provides new insights for developing wide-temperature-responsive multifunctional intelligent luminescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512031
The overuse of antibiotics has led to residual amoxicillin (AMX) in aquatic environments, promoting the spread of antibiotic resistance genes (ARGs) and threatening ecological safety. In this study, magnetic iron-modified biochar (Fe-BC) was prepared from agricultural waste sugarcane bagasse via FeCl3·6H2O impregnation and oxygen-limited pyrolysis. The adsorption performance and mechanism of Fe-BC for AMX were systematically investigated. Under conditions of 25 °C, pH 6, and initial AMX concentration of 50 mg·L−1, the adsorption capacity reached 32.61 mg·g−1. Characterization of Fe-BC before and after adsorption, combined with adsorption kinetics, isotherms, and thermodynamic analyses, revealed that adsorption primarily relied on oxygen-containing functional groups. The mechanisms included pore filling, electrostatic interaction, hydrogen bonding, complexation, and π–π interaction. After six thermal regeneration cycles, the removal efficiency of AMX remained above 76%. The specific surface area of Fe-BC increased from 279.20 m2·g−1 to 481.42 m2·g−1, an enhancement of approximately 72.4%. These results provide a technical reference for the resource utilization of agricultural waste and cost-effective treatment of antibiotic-containing wastewater in rural decentralized areas.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511011
The high cost of catalysts is a critical barrier to the upgrading and cost reduction of catalytic ozonation technology. This study developed a low-cost, long-life Fe–Mn-based ozone catalyst (FMG) derived from solid wastes (red mud and blast-furnace slag), leveraging iron and manganese components to construct dual active centers. A continuous manufacturing process was achieved by integrating alkali-activated cementitious reactions with disc pelletization via a cascade spray-coating and multi-stage curing technique. Under optimal conditions (ozone dosage 3.5 mg·L−1), the catalyst achieved 81.81% total organic carbon (TOC) removal of phenol solution within 60 min, retaining 87.27% of its initial activity after 15 reuse cycles. Long-term continuous-flow tests over 60 days demonstrated stable TOC removal between 69.44% and 75.46%. The production cost of FMG was 1,351.44 CNY·t−1, and the unit TOC removal cost was only 0.06 CNY·(g TOC)−1, representing a 78.69%–86.85% reduction compared to commercial catalysts (0.30–0.48 CNY·(g TOC)−1). This work provides a theoretical and technical foundation for cost-effective catalytic ozonation and high-value conversion of bulk solid wastes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041804
Ethylene diamine tetra (methylene phosphonic acid) sodium (EDTMPS), an organic phosphonate scale and corrosion inhibitor, is widely used in industrial recirculating cooling water systems. Its efficient degradation in blowdown water is critical for water reuse. This study employed a plate-frame electrochemical advanced oxidation (EAOP) system with a boron-doped diamond (BDD) anode to degrade EDTMPS. The effects of operating conditions (temperature, voltage, liquid flow rate) and water quality parameters (pH, electrolyte concentration, chloride ion concentration) were systematically investigated. Optimal degradation efficiency of 99.48% was achieved at 50 °C, 300 mL·min−1, 7.0 V, pH 10, and 0.05 mol·L−1 Na2SO4. Electron paramagnetic resonance (EPR) characterization of chloride-containing systems indicated that reactive species included hydroxyl radicals, sulfate radicals, and possibly chlorine radicals. In a coexisting system with benzotriazole (BTA), EAOPs degraded EDTMPS and BTA with comparable efficiencies. The results demonstrate that BDD-based EAOPs is effective for removing organic phosphonates from low-chloride, low-hardness cooling water, offering a promising approach for blowdown water treatment and reuse.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3843-9
Lignocellulose-based electromagnetic interference (EMI) shielding materials are gaining prominence across multiple sectors, driven by the growing EMI issues associated with rapid advances in communication technologies and electronic devices. These materials have demonstrated significant superiority over traditional EMI shielding solutions, which are often hampered by high cost and environmental concerns. This review emphasizes the excellent potential of lignocellulose as a cost-effective and flexible alternative to deliver the hierarchical structures and functional properties that qualify it for EMI shielding applications. The underlying EMI shielding mechanisms are then elucidated, with a focus on the benefits conferred by lignocellulose in such material systems. Furthermore, typical fabrication strategies for lignocellulose-based EMI shielding materials are comprehensively summarized, along with a discussion of their emerging applications in diverse scenarios. Finally, the challenges encountered in developing lignocellulose-based EMI shielding materials and their significant prospects for future boosting high-performance design and application are also outlined. The insights presented herein are expected to promote the development of efficient and green lignocellulose-based EMI shielding materials that meet the evolving demands of modern society.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4047-0
The proliferation of electronic devices has exacerbated electromagnetic pollution, necessitating advanced electromagnetic wave (EMW) absorbing materials. In this study, VS2 nanorods were uniformly grafted onto graphene nanosheets (GNSs) via a facile ball milling method, constructing 1D/2D hierarchical VS2@GNSs composites with superior EMW absorption properties. The minimal reflection loss (RLmin) reached -49.83 dB at a thickness of 1.83 mm, while an ultra-broad effective absorption bandwidth (EAB) of 6.72 GHz was achieved at 1.96 mm. These performances are attributed to enhanced impedance matching and EMW attenuation capacities. Computer simulation technology (CST) full-wave simulations confirmed remarkable radar cross-section (RCS) suppression, with a reduction value of up to 20.38 dB m2 compared to a metallic substrate. This work provides theoretical and experimental guidance for designing high-performance stealth materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4109-2
The fabrication of high-efficiency organic solar cells (OSCs) under ambient conditions remains a formidable challenge due to the sensitivity of active layer morphology to environmental factors. We propose an innovative approach for air-processed devices that combines spontaneous water-spreading film formation with layer-by-layer (LBL) deposition. This method enables the fabrication of donor- and acceptor-dominant bulk heterojunction blend films near the anode and cathode interfacial layers, respectively, optimizing vertical phase separation and enhancing charge transfer efficiency. In the D18:L8-BO system, the device achieves a power conversion efficiency (PCE) of 19.02% with an exceptionally narrow efficiency distribution. Even for devices with an area of 1 cm2, a PCE of 16.56% is attained. After a 1000-hour decay test, the efficiency retains 84.1%. This novel method offers a promising pathway for advancing the industrial application of large-area, highly stable devices with narrow efficiency distribution under ambient conditions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4088-y
Silicon nitride (Si3N4) is a strong, thermally stable covalent ceramic typically regarded as brittle with limited deformability. Recent experimental and density functional theory (DFT) studies indicate that the α/β interface undergoes a β→α transformation via sliding followed by bond-switching, suggesting a pathway to achieve plasticity, but DFT's spatiotemporal reach prevents a full mechanistic picture. Here, we develop a physics-informed high-accuracy neural network interatomic potential (NNAP) model with DFT-level accuracy for phase transformations and use it to perform large-scale atomistic simulations. NNAP-guided simulations show that structural relaxation during relative sliding between α- and β-phases at the interface triggers pronounced atomic-layer rearrangements and lowers the energy barrier by nearly 60%. We further find that the ensuing phase transformation does not proceed by isolated layer-by-layer switching but instead follows in-plane nucleation and growth mediated by a bilayer cooperative mechanism, which further reduces kinetic barriers and facilitates the transformation. CI-NEB calculations reveal that the bilayer cooperative pathway has an energy barrier of 0.018 eV/Ų, lower than the independent layer-by-layer manner (0.020 eV/Ų), indicating enhanced kinetic accessibility. These results provide new atomistic insights into interface-driven phase transformations in dual-phase Si3N4 and offer guidance for designing more deformable covalent ceramics.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3587-4
Unstable zinc interfaces arising from dendrite growth and parasitic reactions impede the practical deployment of rechargeable aqueous zinc-ion batteries. This study introduces 1-(2-pyridylazo)-2-naphthol (PAN) as a parts-per-million (ppm) level electrolyte additive to stabilize the Zn anode. Theoretical and experimental analyses reveal that PAN undergoes parallel adsorption on the Zn surface, establishing strong π-π interactions between adjacent molecules that efficiently repel water. The OH, pyridine N, and azo N groups in PAN chelate Zn2+, modulating Zn2+ diffusion and promoting uniform deposition while suppressing dendrite formation. A 10 ppm (0.04 mM) PAN addition extends the lifespan of a symmetrical cell to 1500 h at 2 mA cm−2 and 1 mAh cm−2. The Zn||Cu half-cell achieves a Coulombic efficiency of 99.91% over 3500 cycles at 5 mA cm−2 and 1 mAh cm−2. Full cells with NH4V4O10 and MnO2 cathodes exhibit enhanced cycling stability. Notably, a Zn||NH4V4O10 pouch cell retains 71.1% capacity after 250 cycles at 0.8 A g−1. This work demonstrates a viable strategy for selecting high-efficiency additives for aqueous metal-based batteries.