SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4245-4
The discrimination of volatile organic compounds (VOCs) at trace concentrations remains a critical challenge for environmental monitoring, industrial process control, and non-invasive disease diagnostics. Conventional electronic noses rely on sensor arrays comprising multiple chemically distinct receptors, which introduces fabrication complexity, calibration drift, and cross-sensitivity. Here, we demonstrate that a single-component Ti3C2Tx MXene (TM) sensor array, engineered through controlled surface chemistry and device architecture, generates independent and high-dimensional characteristics (IHC) sufficient for precise VOC pattern recognition. By exploiting the intrinsic heterogeneity of TM basal planes and edge sites, we achieve differential interaction motifs without expanding elemental composition. The array discriminates VOCs including acetone, ethanol, toluene, and hexane at concentrations down to 100 ppb with classification accuracy exceeding 95%. Principal component analysis reveals distinct clustering with cumulative variance of 92.3% captured by the first three principal components. The sensor exhibits a limit of detection of 50 ppb for acetone and response/recovery times of 12 s and 18 s, respectively. Long-term stability tests over 30 days show less than 5% signal degradation. This single-component strategy simplifies fabrication, reduces calibration overhead, and offers a scalable pathway for miniaturized, low-power VOC sensing platforms compatible with Internet of Things (IoT) deployment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4477-7
The rapid demand for high-energy-density lithium batteries necessitates advanced solid-state electrolytes (SSEs) to overcome the safety and performance limitations of conventional liquid counterparts. Macrocyclic compounds, with their well-defined cavities, programmable binding sites, and tunable self-assembly, have emerged as powerful molecular regulators for designing next-generation SSEs. This review examines recent advancements in macrocyclic compound-based SSEs by categorizing their functions into four fundamental supramolecular regulation paradigms: cation-centered regulation (e.g., crown ethers), anion-centered regulation (e.g., calixarenes and calixpyrroles), channel-dominated transport (e.g., cyclodextrins), and hybrid regulation (e.g., cucurbiturils). We elucidate how these macrocycles precisely control ion coordination, modulate migration dynamics, and reshape interfacial chemistry, leading to enhanced ionic conductivity, improved Li+ transference numbers, suppressed lithium dendrite growth, and superior interfacial stability. While each paradigm offers distinct advantages, the most promising SSEs often leverage synergistic combinations of these strategies. Finally, we highlight the remaining challenges, including synthetic complexity and multi-objective performance trade-offs, and propose future research directions for developing highly efficient and durable macrocycle-based solid-state lithium batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4317-4
This correction addresses an image assembly error identified in Fig. 7a of the original article published in Science China Materials, volume 66, issue 6, 2023, pages 2513–2522. The error was confined to the assembly of images in Fig. 7a, which presents H&E staining analysis of major organs from a toxicity study. The corrected version of Fig. 7 is provided in this corrigendum. The original study evaluated the toxicity of lyophilized cabazitaxel (CTX) and Tween 80-based CTX formulations in CD-1 mice following a single intravenous administration of 30 mg kg−1 CTX via the tail vein on day 0, with sacrifice on day 14 for analysis (n=5). The figure includes H&E staining of major organs, complete blood count (CBC) analysis with statistical significance indicated by *p < 0.05, and mouse weight measurements. The correction does not affect the overall results, data interpretation, or scientific conclusions of the original article. All authors have reviewed and approved the content of this corrigendum. The authors sincerely apologize for any inconvenience caused to the editorial office, reviewers, and readers. The article was received on 6 May 2026, accepted on 4 June 2026, and published online on 31 July 2026.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3803-8
The molecular copolymerization of donor-acceptor (D-A) interactions has been effectively utilized to modulate the charge transfer dynamics in polymeric carbon nitride (PCN) photocatalysts. Herein, a D-A configured photocatalyst (TPCN) was constructed by copolymerizing 4,4’,4’’-(1,3,5-triazine-2,4,6-triyl) trianiline (TAPT) as the electron donor with triazine units (electron acceptor). The unique propeller structure of TAPT, combined with the triazine framework, expanded the π-conjugated system and induced a strong built-in electric field (BIEF) across the D-A configuration. Theoretical calculations and transient absorption spectroscopy revealed that this synergistic effect facilitated intramolecular charge separation and widened the range of light absorption, indicating accelerated charge transfer and suppressed recombination in TPCN. The optimized TPCN3 sample exhibited dramatically enhanced photocatalytic H2O2 production (1.74 mmol g−1 h−1), representing a 13.4-fold increase over pristine PCN. Additionally, the TPCN3 sample also exhibited significantly faster degradation kinetics than PCN counterpart toward various emerging contaminants. This work demonstrates a promising strategy for designing efficient metal-free photocatalysts for sustainable H2O2 production and environmental remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3603-2
Conventional glass fiber/epoxy (GF/EP) composites, while structurally competent, are hindered by poor interlaminar toughness, low thermal conductivity, and electromagnetic transparency. This study transforms GF/EP composites into advanced structural multifunctional materials by embedding Ti3C2Tx MXene/poly(acrylic acid) (PAA) aerogels (TPA) as integral interlayers. Hybrid composites with tailored architectures—aligned (GFAM_A) and random (GFAM_R) TPA/GF/EP laminates—were fabricated via unidirectional and isotropic freeze-casting, respectively. The integrated aerogel phase promotes crack deflection and distributed energy dissipation, leading to notable enhancements in interlaminar shear strength (ILSS) and fracture toughness. The continuous Ti3C2Tx MXene network within the aerogel creates efficient through-thickness thermal conduction pathways and imparts strong microwave absorption properties. Notably, GFAM_A achieves simultaneous increases of approximately 52% in ILSS, 78% in toughness, and 42% in thermal conductivity, along with effective microwave absorption: a minimum reflection loss of −23.47 dB and a maximum effective bandwidth of 2.70 GHz. This study demonstrates that precision aerogel engineering provides a powerful strategy for upgrading conventional glass fiber composites into advanced multifunctional structural materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4022-7
Transition metal nitrides (TMNs) have emerged as promising alternatives to noble metals in electrocatalysis due to their noble metal-like electronic structures, high conductivity, low cost, and robust chemical stability against corrosion and oxidation under harsh conditions. The rational design and controlled synthesis of TMNs with distinct structures are crucial for developing highly efficient electrocatalysts. This review comprehensively summarizes representative synthetic strategies for TMNs, including direct nitridation, solid-state reaction, sol-gel assisted reaction, and wet-chemical reaction. It presents distinct structural characterizations and demonstrates their advances in electrochemical applications. Finally, the remaining challenges and future research directions for exploring TMNs with well-defined structures are proposed, aiming to guide the development of high-performance electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3805-1
The sluggish kinetics of oxygen reduction and evolution reactions (ORR/OER) at the air electrode impede the practical deployment of fiber zinc-air batteries (FZABs) for wearable electronics. Conventional bifunctional catalysts suffer from an inherent activity trade-off due to the distinct mechanisms of ORR and OER. Here, we propose a spatial decoupling strategy to overcome this limitation by engineering isolated Fe single atoms and Fe–Ir dual-atom pairs on a nitrogen-doped carbon matrix (Fe/FeIr-NC). In this architecture, Fe single atoms serve as ORR centers, while Fe–Ir pairs with tunable spacing are tailored for OER, enabling complete functional separation and independent optimization. The catalyst exhibits an ORR half-wave potential of 0.91 V and an OER overpotential of 250 mV at 10 mA cm−2, yielding a record-low bifunctional gap (ΔE = 0.57 V) that outperforms all reported single- and dual-atom catalysts. A flexible fiber zinc-air battery based on this catalyst delivers a peak power density of 3920 W kg−1, along with a 1.4-fold increase in energy efficiency and a 2.6-fold extension in cycle life compared to the commercial Pt/C + IrO2 benchmark. This work not only breaks the traditional activity trade-off in bifunctional catalysis but also offers a promising route toward high-performance power sources for wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3678-1
Reed membrane, a natural cellulosic material traditionally used in musical instruments, holds promise in flexible electronics due to its abundance, low cost, and excellent biocompatibility. However, its native form contains water-soluble ions and lipid-soluble waxes that hinder performance in acoustic and electronics by compromising electrical insulation and mechanical stability. Here, supercritical fluid superposition purification (SCSP-WA) is introduced, which utilizes supercritical CO2 with water and acetone as bipolar co-solvents to selectively remove these impurities. Post-SCSP-WA treatment, the reed membrane exhibits significant enhancements in mechanical strength and electrical insulation, achieving a 4-fold increase in elongation at break, improved tensile strength and Young’s modulus, and a 98.5% reduction in leakage current, all while maintaining low and stable capacitance. These improvements stem from the restructuring of the fibrous network into a porous, interconnected microstructure. Material characterization (X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM)) confirmed the effective removal of magnesium and waxy functional groups, along with enhanced fiber crosslinking. Cytotoxicity tests further validated the biocompatibility of the SCSP-WA-treated membranes. This environmentally sustainable approach expands the potential of reed membranes in flexible bioelectronics and bio-integrated acoustic systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112603
Sulfamethoxazole (SMX) and microplastics (MPs) are ubiquitous co-existing pollutants in aquatic environments. This study investigated the effects of polyethylene (PE), polypropylene (PP), and polystyrene (PS) MPs with varying aging degrees on the photodegradation of SMX. In the absence of MPs, SMX photodegradation was only 28%, while the presence of virgin PE increased it to 34%. Aging PE for 200, 400, and 600 h further enhanced degradation to 46%, 56%, and 77%, respectively. Pseudo-first-order kinetics showed that the rate constant (kobs) increased from 0.066 h−1 to 0.224 h−1 with aged PE. Aged MPs generated more reactive oxygen species (ROS) under irradiation, including hydroxyl radicals (·OH), singlet oxygen (1O2), and superoxide anions (O2·−), as confirmed by radical quenching and EPR analysis. Density functional theory identified the benzene ring, five-membered heterocycle, and sulfonyl group as primary ·OH attack sites. LC-MS analysis revealed degradation products such as p-aminobenzenesulfonamide, indicating both direct and indirect photolysis pathways. This work provides mechanistic insights into antibiotic-MP interactions and informs strategies for managing co-existing pollutants.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605006
Military ecological and environmental protection is a critical component of national ecological and environmental protection. Military activities and operations, such as training and drills, weapons and equipment testing, and combat, are prone to triggering a series of ecological and environmental problems, including greenhouse gas emissions, deterioration of water resources and water quality, vegetation destruction, land degradation, and typical physical and chemical pollution, which have attracted extensive global attention. This study systematically analyzed the eco-environmental impacts of military activities on multiple environmental media (atmosphere, water, and soil) across different periods, and conducted pollution source tracing in multi-media and representative regions. It reviewed the current status of ecological and environmental protection technologies for the three major environmental media, i.e., atmosphere, water, and soil, and summarized the characteristics and constraints of military ecological and environmental research. Finally, it proposed the research trends and key development directions for military ecological and environmental protection from four dimensions: data monitoring and sharing, research and development of in-situ remediation technologies for military-civilian integrated combined pollution, green construction practices for military facilities, and optimization of management systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3925-5
Capacitive pressure sensors have garnered significant attention in electronic skin, human-machine interaction, health monitoring, and medical devices due to their remarkable properties like highly sensitive pressure perception, good repeatability, and rapid response capabilities. However, manufacturing capacitive pressure sensors that simultaneously achieve a broad linear detection range and high sensitivity remains a significant challenge. Herein, a novel hierarchically interlocked capacitive pressure sensor (HI-CPS) was designed by integrating a stretchable polyethylene glycol (PEG)-based nanofilm dielectric layer with hierarchically interlocked microstructures, demonstrating excellent linearity and high sensitivity over a wide sensing range. HI-CPS based on a one-layer nanofilm exhibits ultrahigh sensitivity (9.40 kPa−1) and an ultralow detection limit (0.1 Pa). When the dielectric layer comprises two layers of stacked nanofilms, the sensor not only maintains high sensitivity (3.17 kPa−1) but also achieves excellent linearity (R2 = 0.999) over a broad working range (<5 kPa), along with remarkable stability even after 10,000 cycles. Benefitting from the outstanding comprehensive performance, HI-CPS has been proven to be successfully implemented in monitoring various human biological signals, sign language recognition, and basketball shooting gesture correction. This strategy of assembling the tailored nanofilm with structural engineering has significant potential application in building high-performance pressure detection and recognition devices.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026030202
High nitrogen (N) inputs, low N use efficiency, and substantial greenhouse gas emissions constrain sustainable double-cropping rice production in the middle and lower reaches of the Yangtze River. To evaluate whether humic acid urea (HAU) can reconcile yield stability with N reduction and carbon mitigation, a field experiment was conducted in a double-cropping rice system. Five treatments were established: conventional urea at the recommended N rate (U), HAU at the recommended N rate (HAU), conventional urea with a 20% reduction in N input (U-20), HAU with a 20% reduction in N input (HAU-20), and a no-N control (CK). Rice yield, N uptake and utilization, and the full life-cycle carbon footprint were quantified. Results showed that HAU significantly increased double-cropping rice yield by 6.46% (early rice) and 8.76% (late rice) compared to U (P < 0.05). HAU-20 maintained yield equivalent to U, while U-20 significantly reduced yield. HAU-20 significantly improved nitrogen fertilizer apparent utilization rate, agronomic efficiency, and partial factor productivity. Specifically, apparent utilization rate increased by 9.24 percentage points (early rice) and 7.80 percentage points (late rice); agronomic efficiency increased by 18.51% and 26.69%, and partial factor productivity by 22.79% and 25.58% for early and late rice, respectively (P < 0.05). Life-cycle carbon footprint was significantly reduced by 26.25% (early rice) and 40.38% (late rice) under HAU-20 compared to U, with per-unit product carbon footprint reduced by 0.22 t CO2-eq·t−1 and 0.86 t CO2-eq·t−1, respectively. The reduction was primarily attributed to decreased CH4 and N2O emissions: early rice CH4 and N2O cumulative emissions decreased by 28.92% and 44.34%, and late rice by 44.46% and 63.85% (P < 0.05). In conclusion, HAU with 20% N reduction sustains yield, enhances N use efficiency, and significantly lowers carbon footprint, offering a viable path for green and low-carbon double-cropping rice production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4011-7
Biomass-derived room-temperature phosphorescence (RTP) carbon dots (CDs) hold great promise for anti-counterfeiting and information encryption. However, achieving solid-state matrix-free long-lived CDs with time-dependent phosphorescence colors (TDPC) remains challenging due to aggregation-induced quenching. Here, solid-state matrix-free RTP phosphorus-doped CDs (P-CDs) are developed via one-step hydrothermal treatment of feather powder and phytic acid. The resulting P-CDs powder exhibits bright blue fluorescence under UV illumination and unprecedented TDPC shifting from yellow to green after UV removal, with afterglow lasting 12 s (average lifetime 1.15 s). Enhanced RTP is attributed to increased triplet-state excitons via spin-orbit coupling induced by P-doping. A dual-mode luminescent ink formulated by combining P-CDs with polyvinyl alcohol (PVA) is successfully applied to commercial A4 paper, showing pronounced TDPC (light-yellow to green) with improved RTP lifetime (1.31 s) after ceasing UV irradiation. The P-CDs/PVA ink demonstrates excellent anti-counterfeiting and information encryption capabilities, outstanding luminescent durability, and broad practicability on cellulosic substrates including fabric and paper. These findings provide a strategy for exploiting matrix-free solid-state RTP P-CDs with distinctive TDPC properties and offer a sustainable route to converting feather wastes into high-value materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.