SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4250-0
Shape memory polymer (SMP)-based transfer printing offers a promising route for heterogeneous integration of flexible electronics, yet non-contact release reliability remains a critical bottleneck. This study systematically investigates the influence of pickup heating modes—localized versus global—on the release yield and energy-delivery mechanisms through combined experiments and finite element simulations. The localized heating mode concentrates strain energy at the interface, enabling controlled chip ejection with high yield, whereas global heating dissipates energy, leading to release failure. Quantitative analysis reveals that localized heating achieves a release yield of 100% under optimized conditions, compared to near-zero for global heating. The ejection velocity under localized heating is higher, which may induce chip bouncing on the receiver substrate, affecting transfer accuracy; however, this can be mitigated by adjusting release gap and laser parameters. The findings establish a theoretical framework for energy pathway design, providing guidelines for achieving high-yield, accurate non-contact release in laser-induced transfer printing. This work advances the practical application of SMP-based transfer printing for micro-LED displays and flexible electronics, addressing a key manufacturing bottleneck.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4292-4
The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4315-2
High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3579-8
Metal sulfides such as CdS are promising for solar-driven H2O2 production but suffer from rapid charge recombination and severe photocorrosion. This study introduces a dual-functional strategy synergizing sulfur vacancy (Sv) engineering and polydopamine (PDA) coating to overcome these limitations. Sv-CdS nanorods were hydrothermally synthesized with tunable vacancy concentrations, followed by in-situ PDA deposition to construct a direct Z-scheme heterojunction. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations reveal that the introduction of S vacancies reduces the work function of CdS, facilitating energy level alignment with PDA and enabling efficient electron transfer from CdS to PDA. By tuning the concentration of S vacancies, the charge transfer efficiency can be maximized. As a result, the photocatalytic H2O2 production rate reaches 2539.5 μmol g−1 h−1 under visible light, and further increases to 4395.5 μmol g−1 h−1 after PDA encapsulation—15.6 times higher than that of pristine CdS. Concurrently, PDA enhances O2 adsorption and protects Sv-CdS from photocorrosion. Sv-CdS@PDA exhibited superior photostability compared to Sv-CdS after three consecutive photocatalytic cycles. Mechanistic studies suggest that the Z-scheme heterojunction effectively separates electron-hole pairs: electrons in the conduction band of CdS reduce O2 to ·O2−, which is subsequently converted to H2O2, while holes in the valence band of Sv-CdS oxidize water to replenish O2. This work provides fundamental insights into engineering charge transfer and stability in sulfide-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3803-8
The molecular copolymerization of donor-acceptor (D-A) interactions has been effectively utilized to modulate the charge transfer dynamics in polymeric carbon nitride (PCN) photocatalysts. Herein, a D-A configured photocatalyst (TPCN) was constructed by copolymerizing 4,4’,4’’-(1,3,5-triazine-2,4,6-triyl) trianiline (TAPT) as the electron donor with triazine units (electron acceptor). The unique propeller structure of TAPT, combined with the triazine framework, expanded the π-conjugated system and induced a strong built-in electric field (BIEF) across the D-A configuration. Theoretical calculations and transient absorption spectroscopy revealed that this synergistic effect facilitated intramolecular charge separation and widened the range of light absorption, indicating accelerated charge transfer and suppressed recombination in TPCN. The optimized TPCN3 sample exhibited dramatically enhanced photocatalytic H2O2 production (1.74 mmol g−1 h−1), representing a 13.4-fold increase over pristine PCN. Additionally, the TPCN3 sample also exhibited significantly faster degradation kinetics than PCN counterpart toward various emerging contaminants. This work demonstrates a promising strategy for designing efficient metal-free photocatalysts for sustainable H2O2 production and environmental remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3559-5
Polyamide (PA) membranes are promising for lithium extraction from spent lithium-ion battery (LIB) leachate but face a trade-off between selectivity and permeability. Here, we demonstrate that nascent PA membranes post-grafted with triaminoguanidinium (TAG) monomers (PA-TAG membranes) gain expanded ion passage channels (0.8–7.1 Å) and enhanced positive charge, achieving high-performance lithium separation. The PA-TAG membrane exhibits a pure water permeance (PWP) of 15.5 L m−2 h−1 bar−1, superior divalent ion rejection (~98%), and an excellent separation factor (~30), significantly outperforming pristine PA membranes. In a simulated acidic battery leachate, the PA-TAG membrane achieved a relative volumetric lithium recovery rate of 48.2% after a two-stage nanofiltration process, with the Li+/M2+ mass ratio of the second permeate reaching 53.35, 445 times that of the feed (0.12). The membrane maintained stable performance over 45 hours of nanofiltration and resisted acidic conditions (pH=2) for at least 20 days. These results highlight the potential of PA-TAG membranes for efficient lithium extraction from acidic battery leachate, addressing the critical need for sustainable recycling of spent LIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3677-9
The demand for high-performance scintillators in high-temperature applications, such as industrial flaw detection and oil exploration, necessitates materials with both high efficiency and thermal robustness. This work reports Tb3+-doped oxyfluoride glass scintillators exhibiting anti-thermal-quenching radioluminescence (RL). Three synergistic strategies were employed: (i) an oxyfluoride glass host providing a low-phonon-energy environment, (ii) increased structural densification of the glass network, and (iii) thermally enhanced energy transfer from Ce3+ to Tb3+. The resulting scintillators achieve an optical transmittance exceeding 88% at 542 nm, a record RL intensity of 350% relative to a standard Bi4Ge3O12 (BGO) crystal, and an imaging resolution of 24 lp mm−1. Notably, the RL intensity at 633 K reaches 143% of its room-temperature (303 K) value, demonstrating significant anti-thermal-quenching behavior. In contrast, commercial BGO and CsI:Tl scintillators exhibit RL intensities dropping to approximately 1% under identical conditions. These results establish the potential of Tb3+-doped glass scintillators for high-temperature X-ray imaging and provide a strategic framework for developing thermally robust scintillating materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3610-7
Electrochemical CO2 reduction reaction (CO2RR) offers an attractive route to produce value-added multicarbon (C2+) products, yet suffers from competing hydrogen evolution and monocarbon production. Here, we propose a dual-confinement effect on CO2 reactant and *CO intermediate, induced by tuning the pore configuration of reconstructed covalent organic frameworks (RC-COFs). The highly crystalline microporous RC-COF-1, when coated on a Cu electrode, enhances local CO2 concentration and restricts CO diffusion, thereby promoting C-C coupling. In acidic electrolyte, the RC-COF-1@Cu electrode achieves a maximum C2+ Faradaic efficiency (FE) of 67.0% at 500 mA cm−2, while maintaining a total carbon product FE above 90% across a broad current density range (100–500 mA cm−2). Experimental and theoretical analyses confirm that the ordered micropores of RC-COF-1 modulate reactant adsorption and intermediate diffusion, leading to improved C2+ selectivity. This work underscores the critical role of COF pore architecture in microenvironment engineering for heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3654-5
Hydrogen production by photosynthetic green algae is an efficient biological process that utilizes light energy to convert water and carbon dioxide into clean and renewable energy. In this paper, we constructed a hybrid system combining graphitic carbon nitride (g-C3N4) and Chlorella pyrenoidosa (Chlorella), in which g-C3N4 serves as an extracellular electron source and Chlorella acts as a biological reactor for specific hydrogen production. In particular, the electronic structure of carbon nitride was optimized by means of hydrothermal alkalization and copper ion doping, expanded the light absorption range and enhanced the light response ability. g-C3N4, as an extracellular electron source, can provide electrons for Chlorella to improve hydrogen production performance which is 3.7 times that of bare Chlorella. The construction of a biological hybrid system is a feasible optimization strategy for the hybrid system to promote the synergistic effect of the hybrid system by regulating the properties of non-living components.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3728-5
Biological intelligence achieves exceptional energy efficiency and environmental adaptability, exemplified by the human brain's ~20 W resting power consumption. A key strategy is the use of multi-ions as signal carriers for transduction and processing. Iontronics, employing ions instead of electrons, offer a promising route to low-energy, heat-dissipation-free devices for memory, sensing, and neuromorphic computing. However, conventional iontronics require external voltage bias to drive ion motion, complicating miniaturization and integration. Here, we highlight a recent breakthrough by Guo et al. reporting a bias-free iontronic memory sensor ('memsensor') that operates by controlling surface ion migration. The device couples vanadium dioxide (VO2) with a low-work-function indium (In) patch. Upon immersion in NaCl solution, In3+ ions generated electrochemically within the Debye length are driven by the intrinsic surface electric field to diffuse into the VO2 surface, inducing an insulator-to-metal phase transition and a measurable, non-volatile change in surface conductance. This conductance state correlates with NaCl concentration and can be reversibly restored by H2O2 treatment. The memsensor emulates the gustatory plasticity of C. elegans, mimicking the response dynamics of ASEL and ASER neurons. In a proof-of-concept, a model boat equipped with the memsensor exhibits adaptive chemotaxis: after 'starvation' training in high NaCl concentration, it avoids high-concentration zones; conversely, after training in low concentration, it migrates toward high-concentration zones. This work demonstrates a bias-free strategy for programmable memory and sensing, potentially advancing autonomous microsystems and bioinspired electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3772-y
Conformal contact between functional electronic films and biological surfaces is critical for long-term device stability, high signal sensitivity, and favorable signal-to-noise ratio. Traditional transfer methods, such as soft stamps and pad printing, often involve mechanical pressing, leading to poor conformality, localized stress concentration, or structural failure. Alternative strategies, including geometric engineering of non-stretchable materials or using stretchable organic alternatives, mitigate these issues but increase design complexity and reduce fabrication efficiency. Here, we highlight a novel 'drop-printing' strategy introduced by Li et al. that leverages capillary force to manipulate a water droplet to pick up a thin film, transfer it to a target substrate, and print it onto the surface. As the droplet evaporates, the film conformally wraps the surface. The droplet acts as a lubricating layer, while interfacial liquid penetrating microstructures generates capillary pressure, facilitating shape-adaptive deformation and significantly reducing stress concentration. The final positioning and conformality are governed by droplet behavior on the target surface. This approach achieves positional deviation of less than 20 μm via regulation of three-phase contact lines. The strategy enables damage-free conformal wrapping of non-stretchable films onto three-dimensional biological surfaces, as demonstrated by drop-printed silicon microfilm conformally wrapping on a rat brain, with successful NIR laser stimulation triggering forelimb movement and synchronized brain electrophysiological signals. This gentle, high-precision method addresses the pressing need for low-stress conformal bioelectronics, offering a general solution for diverse biological interfaces.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604015
Shale gas extraction generates hazardous oily sludge, necessitating effective in-situ treatment. Microemulsion technology offers low energy consumption, cost efficiency, and high oil removal without heating. This study investigates single-surfactant microemulsions using sodium dodecyl sulfate (SDS) and alpha-olefin sulfonate (AOS), and composite microemulsions with sodium silicate (Na2SiO3). Phase behavior and effects of surfactant, alcohol, and salt concentrations on oil removal were examined. Optimal single formulations achieved removal rates of 86.33% for SDS (SDS:alcohol:NaCl = 2.72%:13.21%:2.17% mass ratio) and 87.45% for AOS (SDS:alcohol:NaCl = 2.72%:15.41%:2.17%). SDS microemulsions showed superior phase stability despite slightly lower removal efficiency. Composite SDS-Na2SiO3 microemulsion achieved 92.47% oil removal, outperforming single systems, and could be recycled five times while meeting national secondary reuse standards. AOS-Na2SiO3 exhibited better salt resistance, whereas SDS-Na2SiO3 showed better alcohol resistance. This work provides a novel approach for in-situ oily sludge treatment.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225246
The development of efficient catalyst classification technologies is crucial for optimizing fluid catalytic cracking (FCC) and catalytic pyrolysis coupling processes, where distinct particle size distributions are required for different reaction pathways. In this study, a large-scale cold-model experimental platform of a multi-arm vortex separator is established to explore the influence of operating conditions on classification behavior. Systematic experiments are conducted by changing ejection gas velocity (8~20 m/s), inlet particle concentration (30~70 g/m3), and bed linear velocity (0.15~0.25 m/s). The results demonstrate that ejection gas velocity governs classification sharpness by controlling the entrainment of fines within the coarse fraction. The increase in ejection gas velocity enlarges the upward axial gas velocity inside the device, thereby enhancing the entrainment effect on particles near the vortex arm outlets. Increasing the ejection gas velocity from 12 to 16 m/s reduces proportion of fine particles in coarse components from 14% to 12%. The inlet particle concentration imposes competing effects on classification performance: while higher concentrations promote agglomeration and modify turbulence distribution, excessive loading intensifies fine-particle entrainment, thereby diminishing classification selectivity. The system maintains stable pressure drop characteristics under different bed linear velocities, with the pressure drop increasing by maximum of about 15% when the bed linear velocity is raised from 0.15 m/s to 0.25 m/s. Analysis of grade efficiency curves reveals classical S-shaped profiles with cut sizes (dc50) shifting under different operating regimes. Higher particle concentrations reduces dc50, favoring fine-particle removal, while higher ejection gas velocities enlarge dc50, moving the classification boundary toward larger sizes. These findings confirm the synergistic effect of ejection gas velocity and inlet concentration, highlighting that rational parameter matching can simultaneously improve efficiency and selectivity. Beyond the experimental findings, this work emphasizes the broader applicability of multi-arm vortex separators in refining and petrochemical processes. By enabling precise adjustment of particle size distribution, the system offers a promising pathway for enhancing catalyst utilization, extending catalyst lifetime, and facilitating process intensification in coupled FCC-pyrolysis units.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3779-1
Comprehensive mechanical properties, including hardness (H), elastic modulus (E), fracture toughness (KC), and wear resistance, are essential for oxide ceramics used in demanding environments. This work employs nanoindentation to evaluate these properties for RE3TaO7 (RE=La, Sm, Eu, Gd, Dy, Lu) and identifies the optimal calculation method for KC in brittle oxide ceramics. The ratio of indentation crack length to half-diagonal (l/α) is a key parameter: Eq. (3) is suitable when l/α < 1, while Eq. (4) applies when l/α > 1. The indentation energy method is invalid for brittle ceramics due to crack formation at high loads. RE3TaO7 oxides exhibit H of 5.8–14.9 GPa, E of 127.5–247.8 GPa, and KC of 1.0–2.0 MPa·m1/2, surpassing RE2Zr2O7 (KC 1.0–1.5 MPa·m1/2). Wear resistance, indicated by MDP, ranges from 0.55 to 0.67, outperforming RE2Zr2O7. The superior fracture toughness is attributed to weberite structure with crack deflection and tortuous propagation, contrasted with pyrochlore's straight cracks. These findings provide accurate nanoindentation-based methods for assessing mechanical properties of brittle oxide ceramics, facilitating material discovery and optimization for thermal barrier coatings and other high-temperature applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61104-3
Lithium/fluorinated carbon (Li/CFx) batteries are among the most promising high-energy-density primary batteries, yet substantial heat generation during discharge poses safety concerns, particularly for high-mass-loaded pouch cells. This study systematically investigates the effects of fluorination temperature on the structure and kinetics of fluorinated porous carbon (FPC) cathodes and on heat generation in Ah-level Li/FPC pouch cells. FPC samples with varying degrees of fluorination were synthesized by adjusting fluorination temperature, which influenced not only the F/C ratio but also the C–F bonding configuration, pore structure, and electronic transport capability. Pouch cells employing more highly fluorinated cathodes generated the most heat during discharge, with heat generation exhibiting clear stage dependence, predominantly in the 0–20% depth of discharge (DOD) range. Post-discharge structural characterization and kinetic analysis revealed that highly fluorinated FPC cathodes (FPC-250) undergo more concentrated LiF accumulation, leading to higher charge-transfer resistance, stronger polarization, lower Li+ diffusivity, and higher nucleation overpotential. These factors collectively intensify early-stage heat generation. The study establishes a correlation between fluorination temperature and cathode structure, discharge-product evolution, discharge kinetics, and heat generation, demonstrating that regulating fluorination temperature is an effective strategy for improving the thermal safety of Li/CFx batteries.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202410085
Surface runoff pollution has become a significant source of water contamination. This study constructed an integrated composite bioretention system comprising straw, aquatic plant, and biochar zones for purifying urban surface runoff, aiming to meet the standards for reuse as landscaping water. The system's performance in removing conventional pollutants and polycyclic aromatic hydrocarbons (PAHs) was investigated, along with microbial community structure analysis. Results showed removal efficiencies of 81.1% for COD, 98.1% for TN, 79.1% for TP, and 90.3% for TSS, with effluent meeting the 'Water Quality for Scenic and Recreational Use' (GB/T 18921-2019) standard. The system exhibited robust resistance to pollutant and hydraulic loading. The alkali-modified straw zone was the primary pollutant removal region, facilitating physical adsorption and capture of suspended solids, while released carbon sources enhanced total nitrogen removal. This zone exhibited the highest microbial richness, with relative abundances of Proteobacteria and Firmicutes at 54.3% and 21.9%, respectively. The system effectively removed all 16 priority PAHs, reducing effluent toxicity equivalent by 86.5%. The straw zone completely removed four high-molecular-weight PAHs (BaP, DahA, BghiP, IcdP), while aquatic plants and biochar effectively removed medium- and low-molecular-weight PAHs.
Environmental Chemistry•2026•DOI: 10.0000/202605-1
A method for the determination of hydrazoic acid and sodium azide in workplace air was established using ion chromatography with suppressed conductivity detection. Vapor and mist states of hydrazoic acid were collected in 40 mg·L−1 KOH absorption solution, while sol states of hydrazoic acid or sodium azide were collected on microporous membranes and eluted with 40 mg·L−1 KOH. Separation was performed on a Dionex IonPac™ AS11-HC (250 mm × 4.0 mm) anion analytical column with KOH gradient elution, followed by suppressed conductivity detection. The azide ion (N3−) exhibited good linearity in the range of 0.005–0.5 mg·L−1, with a correlation coefficient (r) of 0.9997. The limit of detection (S/N=3) was 0.002 mg·L−1, and the limit of quantification (S/N=10) was 0.005 mg·L−1. The minimum quantifiable concentrations in air were 0.00256 mg·m−3 for hydrazoic acid and 0.00387 mg·m−3 for sodium azide, based on a 10.0 mL sample solution and a 20 L air sample. Spiked recoveries ranged from 92.0% to 100.4%, with relative standard deviations (RSD, n=6) between 0.76% and 2.51%. The method is efficient, accurate, and sensitive, suitable for monitoring and safety assessment of hydrazoic acid and sodium azide in workplace air.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605020
To address the high CO2 emission proportion in the industrial sector, distillers' grain waste was converted into biochar for CO2 adsorption from flue gas. Raw biochar suffers from weak pore adsorption and poor selectivity at elevated temperatures. This study employed ash self-templating and particle self-assembly to create hierarchical pores and simultaneously load amine groups onto distillers' grains-derived biochar, yielding amine-functionalized hierarchical porous carbon spheres. The amine loading significantly increased, providing more CO2 adsorption sites, while retaining macroporosity (total pore volume 0.0030–0.0066 cm3/g after amine loading), which enhanced morphological stability and CO2 mass transfer. The optimal sample, 0.2PW-K-CNF-PEI, exhibited a CO2 adsorption capacity of 1.03 mmol/g at 100 °C, a CO2 diffusion coefficient of 0.0495 min−1, and a selective adsorption capacity of 44 mg/g at 80 °C. This work offers a solution for valorizing distillers' grain by-products and capturing CO2 from low-temperature flue gas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3897-6
Decoding the nature of catalytically active sites is an essential prerequisite for the rational design of catalysts for electrochemical H2O2 synthesis, but faces significant challenges, particularly for controversial cobalt single-atom catalysts (Co SACs). Herein, we report trace Co single-atom sites embedded within pyridinic N-rich carbon nanospheres (Co1-NNH3-C), synthesized via a self-assembly coupled surface-coating strategy. The Co1-NNH3-C catalyst demonstrates remarkable H2O2 selectivity (99%) and activity at current density of −3.5 mA cm−2 in 0.1 M H2SO4. Through a combined approach of molecular probe experiments, surface modification, and density functional theory (DFT) calculations, we disclose that pyridinic N, rather than Co single atoms, serves as the direct active site for 2e− oxygen reduction reaction (ORR). The trace Co (0.05 wt%) indirectly facilitated pyridinic N formation during pyrolysis but exhibits negligible direct catalytic involvement. DFT reveals pyridinic N sites optimize OOH intermediate adsorption (ΔG*OOH = 4.0 eV) and minimize reaction overpotential of 0.20 V, enabling scalable H2O2 production (907.5 mmol gcat−1 h−1). This work redefines the role of trace metal in SACs, providing a paradigm for designing metal-induced carbon catalysts for sustainable electrosynthesis for H2O2.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60649-4
To achieve efficient conversion of lignin-derived phenolic compounds into high-value hydrocarbon fuels, a series of NiCo bimetallic catalysts with N-doped biochar and Al2O3 composite supports (NiCo/NC-Al2O3) were designed and synthesized. Comprehensive characterizations (XRD, TEM, XPS, H2-TPD) revealed the superior catalytic activity in the hydrodeoxygenation (HDO) of lignin-derived phenolic compounds. The optimized Ni8Co2/NC-Al2O3 catalyst exhibited good metal dispersion and excellent hydrogen dissociation adsorption capacity. Under mild reaction conditions (240°C, 1 MPa H2, 4 h), it achieved complete conversion of guaiacol and 99.9% selectivity to cyclohexane, significantly outperforming monometallic Ni10/NC-Al2O3 and Co10/NC-Al2O3 catalysts. Comparative studies indicated a synergistic effect between Ni and Co, where the introduction of Co effectively promoted aromatic ring hydrogenation and C−O bond cleavage. The catalyst maintained high activity after four reuse cycles, demonstrating outstanding structural stability. This study elucidates the regulatory mechanism of the Ni-Co synergistic effect on catalytic performance, providing new insights for the development of efficient non-noble metal HDO catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030404
The photoelectrocatalytic degradation of seven sulfonamide antibiotics—sulfathiazole (STZ), sulfadiazine (SDZ), sulfisoxazole (SIA), sulfamethoxazole (SMZ), sulfapyridine (SPD), sulfadimidine (SMT), and sulfaguanidine (SG)—was investigated using a bismuth vanadate-loaded titanium dioxide array (BiVO4/TiO2) as the anode under visible light irradiation. Systematic evaluation of BiVO4 loading, solution pH, current density, electrolyte type, and electrolyte concentration revealed optimal conditions of 50 mmol·L−1 Na2SO4, a current density of 1.67 mA·cm−2, and pH 2. Under these conditions, STZ removal and total organic carbon (TOC) removal reached 95.7% and 76.7%, respectively. Removal efficiencies for SDZ, SIA, SMZ, SPD, SMT, and SG were 94.9%, 80.9%, 79.1%, 57.7%, 52.3%, and 52.0%, with TOC removal ranging from 50% to 76.7%. Quenching experiments and electron paramagnetic resonance (EPR) identified hydroxyl radicals (·OH), singlet oxygen (1O2), and sulfate radicals (SO4−·) as dominant reactive species. The BiVO4/TiO2 composite exhibited a valence band edge at EVB = 2.775 V vs. RHE, enabling oxidation of H2O, OH−, and SO4^2− to generate these radicals. The heterostructure narrowed the bandgap to 2.12 eV and enhanced visible light response, facilitating efficient charge separation and transfer. Degradation pathways involved oxidation of aniline moieties to nitro groups, followed by hydroxylation and cleavage of S–N, N–C, or S–C bonds, ultimately mineralizing to CO2, H2O, SO4^2−, and NO3−. The system demonstrated high stability and catalytic efficiency across acidic and alkaline conditions, offering a promising approach for antibiotic removal from environmental waters.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030403
Microplastics (MPs) act as vectors for co-migrating antibiotics and heavy metals, forming complex pollution systems with potential joint toxicity. However, the differential adsorption behaviors and underlying mechanisms of MPs toward organic versus inorganic pollutants remain insufficiently understood. This study selected polypropylene (PP) microplastics, a major component of agricultural plastic films, and investigated the adsorption of sulfamethoxazole (SMX) and Cr(VI) onto aged PP under varying environmental conditions. Results demonstrated that aging increased the maximum adsorption capacity by 2–3 times for both pollutants. Notably, aged PP exhibited approximately 30 times higher adsorption capacity for SMX than for Cr(VI). Characterization revealed that aging introduced oxygen-containing functional groups (e.g., carbonyl) on the MP surface, enhancing adsorption. Mechanistic analysis indicated that hydrogen bonding and electrostatic interactions dominated SMX adsorption, while Cr(VI) adsorption was primarily governed by electrostatic interactions and pore-filling. The stronger intermolecular forces for SMX compared to reversible pore-filling for Cr(VI) explained the observed differences. Increasing pH induced electrostatic repulsion, reducing adsorption of both pollutants. High concentrations of Na+ and Mg2+ caused charge shielding, potentially enhancing Cr(VI) adsorption but inhibiting SMX adsorption due to competition for active sites. The presence of organic matter (humic acid) had negligible effects on Cr(VI) adsorption but reduced SMX adsorption, likely due to complexation. These findings elucidate distinct molecular-level pathways for organic versus inorganic pollutant adsorption on aged MPs, highlighting the roles of hydrogen bonding and pore-filling in driving differential behaviors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022502
This study investigates the effects of different land use types on topsoil carbon (C) and nitrogen (N) contents and their spatial distribution in the lower reaches of the Sancha River Basin, a karst region of the Yunnan-Guizhou Plateau. Grid sampling collected 0–20 cm topsoil from forestland (n=23), cultivated land (n=25), and grassland (n=32). Total C and N were measured. Results showed that topsoil C content followed grassland (40.36±22.92 g·kg−1) > forestland (37.05±12.83 g·kg−1) > cultivated land (34.06±14.57 g·kg−1), while N content followed forestland (2.89±0.76 g·kg−1) > grassland (2.67±1.19 g·kg−1) > cultivated land (2.50±0.65 g·kg−1). One-way ANOVA revealed no significant differences among land use types (P>0.05). Soil C and N were significantly positively correlated across all land uses (r>0.5, P<0.001). Coefficient of variation (CV) indicated grassland had the highest C variability (0.57), while forestland showed the most stable C and N (CV=0.35 and 0.26, respectively). Cultivated land had CVs of 0.43 for C and 0.26 for N. Spatially, forestland exhibited concentrated high C values with significant N heterogeneity; grassland had higher C in southern and eastern areas but scattered distribution, with generally low and variable N; cultivated land showed uniform but lowest C and N. Land use types significantly drive topsoil C and N dynamics through vegetation input, soil disturbance, and management practices, underscoring the importance of rational land use planning for enhancing carbon sink functions and sustainable development in karst watersheds.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040401
Conventional zero-valent iron (ZVI) suffers from limited electron transfer due to its dense surface oxide layer. This study introduces a mechanochemical ball-milling strategy incorporating sodium chloride (NaCl) with ZVI to fabricate chloride-modified ZVI (Cl-ZVIbm). Using hexavalent chromium (Cr(VI)) as a model pollutant, Cl-ZVIbm exhibited a 76.5-fold enhancement in removal kinetics (0.0306 min−1 vs. 0.0004 min−1) compared to ball-milled ZVI (ZVIbm), achieving complete removal of 2 mg·L−1 Cr(VI) within 120 min. Spectroscopic characterization and density functional theory (DFT) calculations revealed dual regulation mechanisms: (1) Cl− substitution of surface hydroxyl groups alters coordination environments, enabling Cr(VI) adsorption via a bidentate binuclear configuration with adsorption energy reduced from –0.28 eV to –1.64 eV; (2) The strong electron-withdrawing effect of Cl− drives directional electron migration from the iron core to the surface, increasing surface Fe(II) content by 26.9% (67.5% vs. 53.2%) and facilitating direct electron transfer to reduce 99.5% of Cr(VI) into low-toxicity Cr(III). Notably, chloride leaching during reactions was only 0.0126 mmol·L−1, far below industrial wastewater discharge standards, confirming environmental compatibility. This work provides atomic-scale insights into chloride-mediated electronic modulation on ZVI surfaces, offering novel principles for interfacial engineering of environmental functional materials and a theoretical basis for heavy metal remediation technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4025-y
Gd3+-sensitized Tb3+-based glasses are high light-yield scintillators. Energy transfer sensitization between Gd3+ and Tb3+ is well-recognized. Gd3+ ions are also found to typically modulate the interionic distances of Tb3+ ions; however, the mechanism why this effect enhances the latter’s photoluminescence still remains unclear. This work focuses on Gd3+, Tb3+ co-doped La2O3-B2O3-SiO2 (LBSO), first demonstrating Tb3+ clusters via spectroscopy. LBSO’s optimal Tb3+ single-doping concentration is 37%, rising to 50% with 20% Gd3+. The LBSO:20%Gd3+,50%Tb3+ sample exhibits a 542 nm emission intensity 2.22 times that of the 37%Tb3+ single-doped sample, 38% scintillation efficiency (vs. BGO), and >20 lp mm−1 X-ray resolution. The introduction of Gd3+ increases the interionic distance between Tb3+ ions within the clusters, thereby suppressing the concentration quenching effect and enhancing the fluorescence emission. We propose this mechanism as “cluster-dispersion sensitization effect”. This effect was further confirmed in other glass systems (LBSO:Lu3+, Tb3+, LBSO:Y3+, Tb3+, Bi-based:Lu3+, Tb3+, etc.). Spectroscopic analysis shows Gd3+-Tb3+ energy transfer efficiency up to 80%. In conclusion, Gd3+ synergistically enhances Tb3+ fluorescence via both effects. These findings not only fully elucidate the sensitization mechanism of Gd3+ ions in Gd3+, Tb3+ co-doped scintillating glasses but also provide new insights for researching the manipulation of activator ion clusters in luminescent materials. In search for novel scintillators, cluster-dispersion sensitization effect may greatly improve their spatial resolution via intrinsic architectures design in glasses, ceramics, thin films, and nanoparticles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3989-4
Organic-inorganic hybrid metal halides (OIMHs) based on Cu(I) ions exhibit broad application prospects in stimulus-responsive luminescent materials due to their rich structural diversity and highly adjustable electronic states. However, achieving sensitive and broad-temperature-range thermal responses remains a significant challenge. Here, we synthesize a zero-dimensional warm white-light emitting OIMH, MPC-W ((C9H20N2O)4(Cu2I4)(Cu2I6)(H2PO2)2), using 4-morpholinopiperidine (4-MP) and CuI. MPC-W features hybrid structures of [Cu2I4]2− and [Cu2I6]4−. The coexistence of three luminescent mechanisms—organic cluster luminescence (CL), self-trapped exciton (STE) emission of [Cu2I6]4−, and cluster-centered (CC) state luminescence of [Cu2I4]2−—endows MPC-W with temperature- and excitation-wavelength-dependent dynamic luminescence. From 77 to 297 K, the luminescence color continuously tunes from blue to cyan, green, yellow-green, and white. In the range of 217–463 K, MPC-W exhibits abnormal luminescence enhancement with increasing temperature. Upon chemical stimuli, MPC-W reversibly transforms into blue-emitting MPC-B ((C9H20N2O)Cu2I4) and yellow-emitting MPC-Y ((C9H18N2O)7Cu8I8). These dynamic luminescent properties position MPC-W for applications in temperature sensing, optical anti-counterfeiting, and password locks. This work provides new insights for developing wide-temperature-responsive multifunctional intelligent luminescent materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512059
Recovery of palladium from Pd-bearing wastewater is economically and environmentally significant. Adsorption is a promising method due to its simplicity, low cost, and high efficiency. In this study, a novel thiol-modified adsorbent (CHT-SH) was synthesized via one-step functionalization of inexpensive chitin (CHT) with thioglycolic acid. At room temperature and pH=2, CHT-SH exhibited an experimental adsorption capacity of 223.67 mg·g−1 for Pd(II), which was approximately 7 times higher than that of pristine CHT (30.6 mg·g−1). Kinetic and isotherm studies indicated that the adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model, with a maximum theoretical adsorption capacity of 248.89 mg·g−1, suggesting monolayer chemisorption. Characterization (FTIR, SEM, XPS, XRD) and density functional theory (DFT) calculations revealed that the adsorption mechanism primarily involved synergistic coordination of nitrogen and sulfur atoms, along with electrostatic interactions. Furthermore, CHT-SH demonstrated good reusability, retaining stable adsorption capacity after five adsorption-desorption cycles. Compared to other adsorbents that rely on redox mechanisms and are costly, CHT-SH offers comprehensive advantages. This work provides a cost-effective and efficient adsorbent for Pd(II) recovery from wastewater, offering technical support and theoretical reference for practical applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012605
Synthetic phenolic antioxidants (SPAs) are widely used, leading to environmental contamination and human exposure. However, studies on their effects on adipocyte differentiation and underlying mechanisms, particularly for emerging SPAs, are limited. This study evaluated the impacts of 4-tert-octylphenol (4-t-OP) and three novel antioxidants (AO 3114, AO 1135, AO 702) on adipogenesis using the mouse 3T3-L1 preadipocyte differentiation model. Lipid staining, triglyceride measurement, differentiation-related gene expression analysis, and transcriptomic approaches were employed. All four SPAs significantly promoted differentiation of 3T3-L1 cells into mature adipocytes and upregulated expression of peroxisome proliferator-activated receptor gamma (Pparγ) and mature adipocyte marker genes. Transcriptomic analysis revealed differential effects on gene transcription during early differentiation. GO and KEGG enrichment analyses indicated that these SPAs promoted adipogenesis by enhancing energy metabolism and protein synthesis, as well as regulating PPAR and other signaling pathways. In conclusion, the tested SPAs promote adipogenesis and disrupt lipid metabolism through distinct mechanisms, suggesting long-term exposure may cause metabolic disorder risks and pose a public health threat.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608025
To evaluate heavy metal contamination and human health risks in desert lakes, this study analyzed concentrations of seven heavy metals (Hg, Pb, Cu, Zn, Cd, Cr, As) in Hongjiannao Lake, Northern Shaanxi, from 2013 to 2024. The absolute principal component score-multiple linear regression (APCS-MLR) model quantitatively apportioned pollution sources, and a health risk assessment model evaluated non-carcinogenic and carcinogenic risks. Results showed average concentrations of the seven metals did not exceed background values, but 28.57% of sampling points exceeded background for As, with a maximum exceedance factor of 1.92. Total average concentration decreased from 112.51 μg/L (2013–2016) to 58.80 μg/L (2017–2024), attributed to the 2016 closure of small coal mines and ecological restoration around the 4A scenic area. Source apportionment identified four sources: industrial (35.44%), agricultural (24.67%), natural (23.65%), and traffic (16.23%), indicating industrial dominance. Non-carcinogenic risks were negligible, but carcinogenic risks exceeded the alert value (1×10⁻⁴), with adults at higher risk than children. Oral ingestion was the primary exposure pathway. As and Cd were key control elements, with exceedance rates of 100% and 16.67%, respectively. These findings provide a theoretical basis for health risk prevention and environmental management.