SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4479-8
The von Neumann architecture is increasingly constrained by energy consumption and data-transfer efficiency as artificial intelligence and data-intensive applications expand. Neuromorphic computing, inspired by the human brain's information-processing mechanisms, offers an alternative paradigm. Two-dimensional (2D) ferroelectric materials are promising candidates due to their intrinsic non-volatility, atomic-scale thickness, ultra-low power consumption, excellent fatigue endurance, and dangling-bond-free surfaces. This review examines recent advances in 2D ferroelectric materials and associated device architectures for neuromorphic applications. It first introduces ferroelectric mechanisms and representative 2D ferroelectrics, then surveys key device architectures including ferroelectric tunnel junctions, diodes, transistors, and photovoltaic devices. Their applications in in-memory computing and in-sensor neuromorphic systems are discussed, with emphasis on artificial neural networks, spiking neural networks, reservoir computing, and neuromorphic perception for efficient information processing and intelligent sensing. The unique properties of 2D ferroelectrics enable integrated sensing, memory, and computing functionalities, demonstrating potential for future neuromorphic and brain-inspired intelligent systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4499-9
Two-dimensional (2D) ferroelectric materials have emerged as promising candidates for next-generation non-volatile memory and neuromorphic computing, yet their integration into commercial devices faces substantial hurdles. This review critically examines the structure, properties, and applications of ferroelectric 2D In-Se materials, with a focus on their potential to overcome the scaling and retention limitations of conventional ferroelectrics such as Hf0.5Zr0.5O2 (HZO). The manuscript synthesizes recent advances in In-Se ferroelectricity, including the mechanisms of polarization switching, modulation strategies, and device demonstrations. Key experimental benchmarks from the literature are analyzed, such as the high data retention and read endurance of 5-nm HZO ferroelectric FETs (IEEE Electron Device Lett, 2019, 40(3): 399-402) and the giant barrier height modulation in ferroelectric van der Waals heterojunctions (Nat Electron, 2020, 3: 466-472). The review also highlights the performance of sliding ferroelectric memories based on rhombohedral-stacked bilayer MoS2, which achieved non-volatile storage with low power consumption (Nat Commun, 2024, 15: 10796). Despite these advances, critical challenges remain: the scalability of In-Se synthesis, the control of domain dynamics at the nanoscale, and the cost parity with silicon-based technologies. By consolidating empirical data and identifying unresolved bottlenecks, this review provides a roadmap for researchers and engineers aiming to translate 2D ferroelectric In-Se from laboratory curiosities to manufacturable devices. The analysis underscores the need for standardized metrology and accelerated lifetime testing to validate industrial viability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4177-3
Chirality profoundly influences tumor therapy by regulating key physiological processes, yet the link between chirality and therapeutic properties of atomically precise metal nanoclusters (NCs) remains poorly understood. Atomically precise Au25 NCs protected by chiral cysteine ligands (L-Au25(cys)18, D-Au25(cys)18, and Rac-Au25(cys)18) were constructed and systematically investigated to elucidate the association between chirality and tumor therapeutic performance. Although no significant difference in enzyme-like activity was observed among the three NCs, Rac-Au25(cys)18 exhibited enhanced reactive oxygen species generation under 808 nm laser irradiation, achieving superior phototherapeutic effects in both in vitro and in vivo tumor models. The chiral Au25 NCs induced distinct cell death pathways: L-Au25(cys)18 primarily triggered ferroptosis, D-Au25(cys)18 induced both ferroptosis and apoptosis, and all three NCs activated disulfidptosis. In vivo, tumor inhibition rates for L-Au25, D-Au25, and Rac-Au25 groups were 46.7%, 42.5%, and 68.3%, respectively, with no significant body weight fluctuations and minimal hepatorenal toxicity. Hematological and histopathological analyses confirmed favorable systemic biocompatibility. This work clarifies the correlation between chiral structures and tumor therapeutic performance of gold NCs, providing experimental insights and theoretical support for the design of novel chiral nanomaterials and optimization of precise tumor phototherapeutic strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4202-3
Carbon dots (CDs) with absorption in the second near-infrared window (NIR-II, 900-1700 nm) hold promise for tumor theranostics, yet existing synthesis methods often involve complex procedures, harsh conditions, or lack precise control. Here we report a 'self-photooxidation-restructuring' strategy that enables structural reorganization of the carbon core in CDs, achieving a significant redshift of absorption into the NIR-II region. Under ultraviolet (UV) light irradiation, the precursor (B-CDs, absorption in UV region) generates singlet oxygen, which self-oxidizes aldehyde groups and the carbon skeleton of B-CDs to stronger electron-withdrawing carboxyl groups and carbon radicals, respectively. These processes facilitate the formation of new C=C bonds between isolated aromatic domains, thereby transforming B-CDs into novel CDs (N-CDs) characterized by enhanced donor-acceptor interactions and a redshift in absorption toward the NIR-II window. Various experimental data, including high-resolution XPS, FTIR, NMR, EPR, have proved the proposed formation mechanism. The novel N-CDs afforded a high photothermal conversion efficiency of up to 71.33%, which enabled 1064 nm laser-activated photoacoustic imaging (PAI)-guided photothermal therapy (PTT) in tumors. This work opens a new avenue for the synthesis and modulation of CDs in the NIR-II region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3539-5
MXene-based layered films are promising for electromagnetic interference (EMI) shielding, yet achieving highly ordered structures in scalable production remains challenging. Here, we report a facile centrifugal casting method for fabricating MXene/polyvinyl alcohol (MXene/PVA) films with highly oriented and compact layered structures. During centrifugal casting, the viscous fluid experiences strong shear and centrifugal forces along tangential and normal directions, respectively, inducing compact and oriented arrangement of MXene nanosheets. Consequently, the Herman's orientation factor increases from 0.681 to 0.794 as rotation rate rises from 0 to 4000 r/min. Accordingly, tensile strength and toughness improve from 55.2 to 191.1 MPa and from ~0.8 to 2.5 MJ/m³, respectively. The highly oriented and compact layered structure with ultrathin thickness (~8 μm) enables a high absolute electromagnetic shielding effectiveness (SSE/t) of 21029 dB cm²/g. Moreover, increased orientation reduces infrared emissivity to 0.248, endowing the film with excellent thermal camouflage capability. This work presents an effective strategy for constructing high-performance MXene-based layered films.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604016
River and lake health assessment is an important technical means to evaluate the health status of rivers and lakes, scientifically analyze river and lake problems, and strengthen the implementation of the river and lake head system. Based on the Guidelines for River and Lake Health Assessment (Trial) and the characteristics and actual basin conditions of the lower Yellow River in Henan, this study determined the river health evaluation index system for this reach. Through collection of basic data and special investigations and monitoring, the health status in 2020 was evaluated from four criteria layers: 'basin', 'water', biology, and social service function. The overall score was 83.4, corresponding to a 'healthy' grade. The four criteria layer scores were 73.7, 95.0, 62.1, and 95.5, respectively. The evaluation identified main problems including low aquatic biodiversity, suboptimal shoreline conditions, and pressure on water supply security. Corresponding governance and protection measures were proposed, such as strengthening ecological protection, improving river regulation works, enhancing shoreline management, and upgrading water diversion facilities. The results provide scientific basis for river health management and the implementation of the river chief system in the lower Yellow River.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3884-1
Sliding ferroelectricity arises from lateral interlayer shifts in stacked two-dimensional van der Waals materials, where relative sliding of one layer over another breaks inversion symmetry and generates switchable polarization. This novel mechanism enables intrinsically nonpolar crystals to exhibit ferroelectric behavior via specific stacking arrangements, expanding the pool of potential ferroelectrics. Distinctive features include ultralow switching barriers, exceptional endurance over millions to trillions of cycles, and ultrafast polarization reversal on sub-nanosecond timescales, surpassing conventional ferroelectrics. This review begins with theoretical models of sliding ferroelectricity, followed by experimental verification and characterization techniques. It then discusses recent advances in polarization-switching kinetics, domain wall dynamics, topological polar structures, multiple polarization states, optical probing, and active modulation strategies. Finally, challenges and future prospects for two-dimensional sliding ferroelectric materials are addressed.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3778-8
The global surge in polyvinyl chloride (PVC) waste demands urgent technological solutions that address both environmental persistence and resource recovery. Here, we present a triple-functionalization strategy that converts chlorinated plastic waste into high-performance sodium-ion battery anodes through molecular-level control of carbon architectures. Sequential dichlorination, sulfonation, and N-doping collaboratively reconfigure precursor reactivity, steering pyrolysis toward hierarchically porous hard carbon with tailored defect chemistry. Sulfonic groups stabilize 3D carbon skeletons during carbonization, enabling closed-pore formation with an average diameter of ~2.55 nm while N-doping expands interlayer spacing (0.382 nm) and creates adsorption-active pyrrolic-N sites. This defect-engineered synergy delivers unprecedented sodium storage metrics: 355 mAh g−1 reversible capacity at 0.1 A g−1 (95.4% of graphite’s Li-ion capacity), a capacity retention of 216 mAh g−1 after 1000 cycles at 1.0 A g−1 (70.1% capacity retention), and 188 mAh g−1 even at a high current density of 5.0 A g−1. Operando analyses reveal a potential-dependent storage hierarchy: surface-dominated adsorption transitions to intercalation/filling-dominated behavior with defect-buffered structural integrity. The process simultaneously achieves 25% carbon yield from PVC and avoids toxic dioxin emissions, establishing a scalable prototype for sustainable energy storage systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4043-3
In-plane InAs nanowires and nanowire networks are promising platforms for electronics, optoelectronics, and topological quantum computing due to their small electron effective mass, narrow bandgap, high electron mobility, strong spin-orbit coupling, and large Landé g factor. However, their selective area growth on CMOS-compatible group-IV substrates remains challenging. Here, we report the selective area growth of high-quality in-plane InAs nanowires and nanowire networks on Ge(111) substrates by molecular-beam epitaxy. Conventional selective-area epitaxy fails to simultaneously achieve good selectivity and continuity. To overcome this, we developed a metal-sown, single-indium-source two-step growth method, which attains both selectivity and continuity but yields nanowires with rough surfaces and lengths below 10 μm. We then introduced an upgraded metal-sown, dual-indium-source two-step growth method, successfully fabricating in-plane InAs nanowires and nanowire networks with smooth surface morphology and lengths exceeding 60 μm. By optimizing the As beam equivalent pressure, overgrowth at network junctions is effectively suppressed, resulting in uniform nanowire networks. High-resolution transmission electron microscopy and Raman spectroscopy confirm the high-quality single-crystalline nature and pure zinc-blende structure of the nanowires and networks. This work establishes a foundation for fabricating high-quality in-plane InAs/superconductor hybrid nanowires and nanowire networks on Ge substrates.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507081
Coal chemical waste salt, a solid residue from evaporative crystallization of high-salinity wastewater, poses significant environmental risks and challenges for resource utilization due to its complex composition. This study systematically analyzes its composition and environmental hazards, highlighting its typical "mixed salt" nature and the potential threats of organic pollutants and heavy metals to soil, water, and ecosystems. It reviews mainstream treatment pathways, including organic degradation, inorganic impurity removal, and salt separation, with a focus on the resource utilization of sodium chloride and sodium sulfate and their industrial prospects. The current pollution control technical specifications and product quality standards are examined, comparing the scope and technical points of relevant standards such as the "Technical Specification for Pollution Control of Chemical Waste Salt." Finally, countermeasures are proposed to address challenges including difficult treatment of mixed salts, insufficient resource utilization incentives, and incomplete standard systems, emphasizing technological innovation, policy guidance, and standard improvement.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3814-2
Micro-structured surfaces have attracted increasing attention due to their great potential applications. However, it is still a challenge to continuously fabricate micro-structured surfaces based on thermoplastics by a facile, low-cost, and environmentally-friendly method. Herein, with the help of the extrusion molding method and an elaborately designed mold, micro-grooved fiber (MGF) based on high-density polyethylene (HDPE) is continuously prepared. Theoretically, infinitely long MGFs with feature sizes down to a few microns can be efficiently fabricated because of the continuous fabrication characteristic of the melt extrusion method. Interestingly, left- and right-handed micro-grooves with different helix angles can be produced by applying twisting at the die exit, and the macroscopically MGF springs can be further fabricated via a self-designed three-dimensional helical enwind device. By regulating wettability, MGF can achieve liquid self-transport on predefined paths. In addition, MGF fabric exhibits rapid evaporation behavior, whose evaporation rate is about 4 times higher than that of the Smooth fiber (SMF) fabric and 2 times higher than that of the most popular commercial quick-drying fabric (i.e., Cool-max fabric). This work proposes a facile and environmentally-friendly method for continuously preparing low-cost and flexible MGF, opening a new pathway to develop fiber-based microfluidic systems following the concept of "functionalized processing for thermoplastics".
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606007
Cobalt-aluminum spinel metal oxides derived from hydrotalcite were synthesized via hydrothermal, coprecipitation, and sol-gel methods, and their catalytic performance for NO oxidation was systematically evaluated. Characterization by X-ray photoelectron spectroscopy (XPS), O2 temperature-programmed desorption (O2-TPD), H2 temperature-programmed reduction (H2-TPR), and Raman spectroscopy revealed that the synthesis method significantly influences the surface Co2+/Co3+ ratio, which in turn modulates the formation of surface oxygen vacancies. The hydrothermally synthesized catalyst (CoAlO-H) exhibited the highest density of surface oxygen vacancies, leading to enhanced adsorption and activation of gaseous oxygen and superior NO oxidation activity compared to coprecipitation (CoAlO-C) and sol-gel (CoAlO-S) counterparts. Mechanistic studies using NO-TPD, NO+O2-TPD, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) identified nitrates as key intermediates. Notably, CoAlO-C and CoAlO-S followed the Langmuir-Hinshelwood (L-H) mechanism, whereas CoAlO-H operated via both L-H and Mars-van Krevelen (MvK) mechanisms. The exceptional performance of CoAlO-H is attributed to its abundant surface oxygen vacancies, high surface oxygen mobility, and low decomposition temperature of reaction intermediates. These findings provide a rational basis for designing efficient non-precious metal catalysts for NO oxidation in diesel exhaust aftertreatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606006
Chitosan-based microsphere composites have attracted considerable attention for phosphorus adsorption due to their facile preparation, low cost, environmental friendliness, and high uptake capacity. This review summarizes the physicochemical properties and preparation methods of chitosan microspheres for phosphate removal, outlines common modification strategies to enhance adsorption capacity, and discusses their applications in aqueous environments. Adsorption mechanisms, regeneration, and resource recovery of spent microspheres are analyzed. Challenges and recommendations are proposed, including streamlined preparation, enhanced phosphorus recovery, removal of multiple phosphorus forms, and practical implementation. The review aims to guide the development of high-performance chitosan-based microspheres for phosphorus removal.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511043
Zero-valent iron (ZVI) suffers from surface passivation and low electron utilization in reductive removal of nitrobenzene (NB). To address these issues, a ball-milled iron/digestate biochar composite (BM-Fe/DBC) was prepared and compared with a physically mixed counterpart (PM-Fe/DBC). Characterization revealed that ball milling tightly embedded ZVI particles into the carbon matrix, forming Fe–C chemical bonds and a strong interfacial coupling structure that established efficient electron transfer channels. This structure significantly enhanced the micro-galvanic effect between iron and carbon, yielding superior reduction performance across a wide pH range (3–9). Under optimal conditions (Fe:C mass ratio 2:1, dosage 1.0 g·L−1, pH 5), BM-Fe/DBC achieved 79.9% NB removal, and the generation of aniline (AN) was 1.85 times that of PM-Fe/DBC. Mechanistic studies indicated that the intimate Fe–C interfacial coupling promoted sustained ZVI corrosion and enhanced the production of indirect reducing species, including adsorbed Fe(II) and atomic hydrogen (H*). Electrochemical analyses showed that BM-Fe/DBC exhibited a lower corrosion potential, a higher corrosion current density (approximately 2.15 times higher), and lower charge transfer resistance, kinetically confirming its superior electron transfer capability. These findings reveal that constructing strong interfacial coupling in iron–carbon composites via mechanochemical methods can effectively overcome key limitations of ZVI in reduction reactions, providing a theoretical basis and practical pathway for designing high-performance water treatment materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60656-1
Under the carbon neutrality strategy, biomass boilers have emerged as key facilities for renewable energy utilization, yet are characterized by low-concentration SO2 emissions. Ca-based dry desulfurization presents a promising technology for biomass boiler flue gas purification due to its compact structure, low capital investment and simple operation and maintenance. However, it is generally limited by the low adsorbent utilization and insufficient desulfurization efficiency. Herein, this study developed a novel Ca-Mn composite adsorbent through a synergistic strategy integrating F127 surfactant to optimize dispersion and Mn loading to enhance oxidation efficiency. The resulting adsorbent not only significantly increased the breakthrough sulfur capacity of the Ca-based material but also markedly improved the synergistic removal of Hg0. It was demonstrated that the introduction of Mn elements and F127 effectively suppressed the agglomeration of Ca(OH)2 crystallites and induced an oxygen vacancy-rich structure, while simultaneously optimizing the pore structure of the adsorbent. The modified adsorbent exhibited the enlarged specific surface area and pore volume, which favored to enhance the reaction mass transfer and effectively prevent the pore blockage and coverage of active sites by desulfurization products. The Mn sites and oxygen vacancies formed catalytic centers, which not only accelerated the desulfurization reaction by promoting SO2 oxidation but also enabled the adsorbent to couple with Hg0 catalytic oxidation functionality. Consequently, the simultaneous removal of SO2 and Hg0 was significantly enhanced on the Ca-Mn composite adsorbent.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050803
This study systematically investigates the synergistic drag reduction mechanism of surfactants and porous media in coal seam water injection. Four surfactant types—cationic CTAB, anionic SDBS, amphoteric BS-12, and nonionic OP-10—were tested with five porous media pore sizes (3–12 mm) using a custom-built all-in-one drag reduction test system. The effects of surfactant type, mass concentration, driving frequency, and pore diameter on drag reduction efficiency were evaluated. Results show that in an empty tube, drag reduction efficiency increases with mass concentration. As driving frequency increases, drag reduction first rises then falls, peaking at 35 Hz. With porous media, drag reduction exhibits pore size dependence, reaching a maximum at 8 mm and decreasing thereafter. The composite surfactant-porous media system achieves synergistic enhancement over single systems. At 0.05% mass concentration, all surfactants attain maximum drag reduction, with CTAB showing the highest efficiency. Optimal conditions (0.05% CTAB, 35 Hz, 8 mm pore size) yield a drag reduction rate of 66.14%, a 1.4-fold improvement over 20 Hz. These findings demonstrate that tailoring surfactant and porous media parameters can significantly optimize coal seam water injection efficiency, offering a practical approach for dust control in mining.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3991-3
Ionic covalent organic frameworks (ICOFs), as an emerging subclass of covalent organic frameworks (COFs), have garnered significant attention owing to their unique integration of structural precision and ionic functionality. Although conventional neutral COFs possess excellent crystallinity, tunable porosity, and high stability, their limited electronic tunability and poor charge-transport properties have constrained their performance in various applications. The incorporation of ionic sites into COF skeletons or pore environments effectively overcomes these intrinsic limitations. The presence of charged centres enhances framework polarity, modulates local electrostatic fields, and facilitates efficient ion migration and charge separation, thereby endowing ICOFs with superior functionality. As a result, ICOFs have demonstrated remarkable potential in diverse fields, including adsorption, sensing, ion conduction, energy devices, photocatalysis, and electrocatalysis. This review provides an integrative perspective by systematically linking framework design, ionic site engineering, structure-property relationships, and functional performance in various applications, highlighting ICOFs distinct advantages over neutral COFs and providing fundamental insights for the rational design of next-generation ionic frameworks toward energy and environmental applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4124-x
Aerogel fibers, featuring distinct porous architecture and fiber flexibility, have emerged as leading materials for personal thermal protection; however, complex drying processes and singular thermal insulation mechanisms limit their use in complex environments. Here, aramid nanofiber/carbon nanotube (ANF/CNT) aerogel fibers integrating passive thermal insulation and active solar heating were fabricated via wet-spinning and ambient-pressure drying (APD). The incorporation of CNT and Ca2+ generates abundant physical and chemical crosslinking points, strengthening the nanofiber network skeleton and reducing structural collapse during APD to only 8.9% shrinkage. The resulting ANF/CNT aerogel textiles exhibit low thermal conductivity of 33.8–40.4 mW/(m K) and thermal insulation capability from −196 to 400 °C. The photothermal effect of CNT enables active solar heating, effectively supplementing passive insulation and allowing survival in extremely cold environments. In real tests, the synergistic effect improved skin temperature by up to 5.9 °C, significantly higher than 1.6 °C from passive insulation alone. These ANF/CNT aerogel fibers combine flexibility, mechanical strength, and flame retardancy, demonstrating promising potential for smart, controllable personal thermal management applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4101-5
Single-atom catalysts (SACs) represent a frontier in catalytic science, offering theoretically 100% atom utilization, tunable electronic structures, and coordination microenvironments, with broad prospects in energy conversion and high-end chemical synthesis. However, atomic-scale challenges—disordered active site distribution, constrained electronic structures, metal atom agglomeration, limited loading capacity, and insufficient coordination environment precision—severely restrict performance optimization and practical deployment. This review systematically analyzes the mechanistic interconnections among these challenges, framing them as a multi-level, coupled systemic problem rather than isolated issues. It summarizes recent regulation strategies including support engineering, coordination regulation, spatial confinement, and dynamic synthesis, emphasizing the value of multi-strategy synergy for performance breakthroughs. Future research directions include developing in-situ characterization with high spatial and temporal resolution, exploring multi-site synergistic catalytic mechanisms, and constructing standardized databases and rational design platforms. These efforts aim to enable large-scale advances in clean energy and green chemical processes.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3587-4
Unstable zinc interfaces arising from dendrite growth and parasitic reactions impede the practical deployment of rechargeable aqueous zinc-ion batteries. This study introduces 1-(2-pyridylazo)-2-naphthol (PAN) as a parts-per-million (ppm) level electrolyte additive to stabilize the Zn anode. Theoretical and experimental analyses reveal that PAN undergoes parallel adsorption on the Zn surface, establishing strong π-π interactions between adjacent molecules that efficiently repel water. The OH, pyridine N, and azo N groups in PAN chelate Zn2+, modulating Zn2+ diffusion and promoting uniform deposition while suppressing dendrite formation. A 10 ppm (0.04 mM) PAN addition extends the lifespan of a symmetrical cell to 1500 h at 2 mA cm−2 and 1 mAh cm−2. The Zn||Cu half-cell achieves a Coulombic efficiency of 99.91% over 3500 cycles at 5 mA cm−2 and 1 mAh cm−2. Full cells with NH4V4O10 and MnO2 cathodes exhibit enhanced cycling stability. Notably, a Zn||NH4V4O10 pouch cell retains 71.1% capacity after 250 cycles at 0.8 A g−1. This work demonstrates a viable strategy for selecting high-efficiency additives for aqueous metal-based batteries.