Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025121602
This study characterized the body burden of polybrominated diphenyl ethers (PBDEs) in a physical examination population in Shenzhen and evaluated its impact on thyroid function. Serum samples from 368 residents were analyzed for eight PBDE congeners using atmospheric pressure gas chromatography-tandem mass spectrometry (APGC-MS/MS). The median concentration of ∑8PBDEs was 10.2 ng·g⁻¹ lipid weight (lw), ranging from 0.13 to 2089.4 ng·g⁻¹ lw, with BDE-209 predominating (59.7% of total). Multiple linear regression revealed that a 1.7-fold increase in serum BDE-153 was associated with a 0.4% increase in free triiodothyronine (FT3) (P<0.05), while a 1.7-fold increase in BDE-183 was associated with a 0.9% decrease in total triiodothyronine (T3) and a 0.7% decrease in FT3 (P<0.05). Bayesian kernel machine regression (BKMR) indicated a negative correlation between mixed PBDE exposure and thyroid-stimulating hormone (TSH) at high exposure levels. Weighted quantile sum (WQS) regression showed that mixed exposure was associated with decreased T3 levels and T3/FT3 ratio, with BDE-153 and BDE-183 as the primary contributors. These findings suggest that PBDE exposure may adversely affect thyroid function and disrupt thyroid hormone homeostasis, with BDE-183 and BDE-153 playing key roles. This study provides a scientific basis for PBDE health risk assessment and thyroid protection.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025122101
Phenolic compounds, widely used in petrochemical, textile, and pharmaceutical industries, pose severe risks to ecosystems and human health due to their toxicity and persistence. Traditional Fe2+-mediated Fenton oxidation, while effective, suffers from external H2O2 and Fe2+ addition, low H2O2 utilization, narrow pH adaptability, and iron sludge generation. This study develops a g-C3N4-based heterogeneous photo-Fenton system that operates without external H2O2 or Fe2+ salts, exhibiting a wide pH range and minimal iron sludge. The synthesized Fe3O4@UiO/IKCN catalyst, under visible light, selectively reduces dissolved oxygen to H2O2 via a two-electron pathway and activates it to hydroxyl radicals (·OH), achieving efficient degradation of phenolic compounds. The integration of photocatalytic H2O2 formation and Fenton activation enables sustained production of oxidative species, demonstrating superior performance at circumneutral pH. This work provides new insights into the rational design of heterogeneous Z-scheme photo-Fenton catalysts and offers experimental and theoretical support for photocatalytic H2O2 synthesis and phenolic wastewater treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025122102
Uranium is a key resource for nuclear energy, but its mining and processing generate large amounts of uranium-containing wastewater, posing persistent threats to the environment and human health. In this study, a cyano-functionalized C3N4/ZnIn2S4 (CCN/ZIS) heterojunction system was constructed for efficient removal of U(VI) from uranium mining wastewater. The introduction of cyano groups significantly enhanced the adsorption capacity of CCN/ZIS, reaching a maximum of 123.65 mg·g−1. Characterization techniques (UV-vis DRS, EIS, i-t, PL, TRPL) confirmed that cyano groups effectively suppress charge carrier recombination, improving photogenerated carrier separation. Under visible light, the modified material achieved over 95% removal of U(VI) within 10 minutes, demonstrating a 20-fold efficiency increase compared to pristine materials. Even in simulated uranium mining wastewater containing high concentrations of CO3^2− and F−, CCN/ZIS maintained excellent performance, overcoming the technical challenge of U(VI) removal efficiency being constrained by water quality conditions. Quenching experiments identified e− and ·O2− as the primary reactive species responsible for U(VI) reduction. This study reveals the synergistic mechanism of selective U(VI) enrichment and photoreduction, providing theoretical innovation and technological breakthroughs for uranium pollution control.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507095
This study investigates the optimization of CO2 mineralization curing on the performance of a ternary cementitious system comprising steel slag, fly ash, and Portland cement. Specimens were fabricated with varying residual water-to-cement ratios (r/w), steel slag and fly ash contents, curing pressures, and durations, then subjected to standard curing and CO2 mineralization curing. Compressive strength and carbon sequestration rate were measured, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to analyze mineral composition and microstructural evolution. Results indicate that compressive strength first increases then rapidly decreases with increasing residual water-to-cement ratio, with an optimal r/w below 0.15. Both compressive strength and carbon sequestration rate increase with higher steel slag content; the 50% steel slag + 10% fly ash formulation exhibited the highest values. Microstructural analyses revealed that CO2 mineralization primarily consumes hydration products such as Ca(OH)2, C-S(Al)-H, and AFt, generating abundant calcium carbonate that densifies the pore structure, thereby enhancing mechanical properties. Lower residual water-to-cement ratios, higher steel slag content, or extended curing durations increase the content and crystallinity of calcium carbonate. SEM observations confirmed the presence of densely packed, well-crystallized rhombohedral calcite in specimens with lower water-to-cement ratios and higher steel slag content. These findings provide a mechanistic basis for the engineering application of CO2 mineralization curing in ternary solid-waste cementitious materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60631-1
Methane dehydroaromatization (MDA) offers a carbon-neutral route to benzene, toluene, and xylene (BTX), yet the regulatory mechanisms of Brønsted acid site (BAS) strength and spatial proximity to Mo sites remain unresolved. This study systematically tunes BAS strength via isomorphous substitution (Al, Ga, Fe, B) and Mo-BAS proximity in ZSM-5, integrating catalytic evaluations with density functional theory (DFT). Strongly acidic Al-zeolites achieve the highest methane conversion, while weakly acidic B-substituted systems exhibit optimal mono-/bifunctional synergy, outperforming moderate-acid counterparts. DFT reveals that deprotonation energy (DPE) correlates with acid strength; Al-ZSM-5 (DPE = -5.68 eV) lowers the C–H activation barrier (ΔG = 1.467 eV). Spatial proximity analysis shows that nanoscale Mo-BAS distances, achieved via ball milling, enhance methane conversion by 33% and BTX yield by 31% compared to micrometer-scale mixtures, by accelerating intermediate transport and suppressing coke. These findings establish a multi-scale framework linking acid strength, spatial confinement, and electronic modulation, providing actionable guidelines for designing next-generation MDA catalysts.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225225
The non-Newtonian rheological properties of plastic melts are critical for regulating plastic processing, molding, and recycling processes, ensuring processing stability and product performance. However, rheological data for commonly used plastics and their blends remain incomplete. This study combined experimental testing and theoretical modeling to investigate the rheological behaviors of four pure plastics—polypropylene (PP), polyethylene (PE), polystyrene (PS), and acrylonitrile-butadiene-styrene copolymer (ABS)—and three binary blend systems: PE/ABS, PP/ABS, and PS/ABS. Rheological tests were conducted using a rheometer over a shear rate range of 0.1–100 s⁻¹ and temperatures from 180°C to 250°C. Results showed that the flow behavior index n was less than 1 for all samples, and apparent viscosity decreased significantly with increasing shear rate, indicating clear shear-thinning behavior. The consistency coefficient K followed the Arrhenius relationship with temperature, and melt viscosity decreased as temperature increased. The study quantitatively characterized the relationship between the mass fraction m (0.5 < m ≤ 1) of the main component in binary blends and melt viscosity. Based on experimental data, a component correction term was introduced into the traditional power-law model to construct a constitutive equation that simultaneously describes the effects of shear rate, temperature, and component fraction on melt viscosity. The average relative error between model predictions and experimental values was only 5.90%. These rheological data and the modified constitutive equation provide important theoretical support and data reference for optimizing process parameters in waste plastic recycling and injection molding.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3833-1
Developing plasmonic nanomaterials with compositions beyond noble metals is crucial for expanding their applications. Transition metal nitrides, such as titanium nitride (TiN), exhibit excellent plasmonic optical properties and photothermal conversion efficiency, showing promise in catalysis, photothermal therapy, and seawater desalination. However, the structure-property relationship governing their plasmonic optical properties remains unclear. Here, we constructed Au@TiN core-shell nanostructures and systematically investigated the tunability of their geometry, composition, and optical properties. By varying the Au core size and TiN shell thickness, we achieved precise control over the localized surface plasmon resonance (LSPR) from visible to near-infrared wavelengths. Single-particle scattering spectroscopy revealed distinct plasmon hybridization modes, with experimental spectra matching theoretical simulations. The Au@TiN nanostructures exhibited enhanced photothermal conversion efficiency (η = 78.5%) under 808 nm laser irradiation, significantly outperforming pure TiN nanoparticles (η = 45.2%). This work demonstrates multi-factor control over plasmonic effects in TiN, providing insights for designing TiN-based plasmonic nanomaterials for catalysis and sensing.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60636-6
Polyoxymethylene dimethyl ethers (DMMx) are promising clean diesel additives. Compared to the traditional aldol condensation route, the one-step oxidative method for producing DMMx directly from methanol is a green synthesis route offering significant advantages. However, due to the complexity of the reaction, a balance must be struck between oxidation depth and C–O chain growth efficiency. This imposes specific requirements on the design of catalysts with multifunctional active sites: the catalyst should possess appropriate oxidative activity, suitable acid strength distribution, and effective synergy between these two functions. To address these challenges, this study designed a sulfuric acid-modified molybdenum-doped NASICON catalyst, which demonstrated favorable catalytic performance in the one-step oxidative synthesis of DMMx from methanol. Over the NSC-Mo-0.5-30% catalyst, methanol conversion rate of 81.3% and the DMMx selectivity of 58.7% were achieved, along with the formation of heavier molecules, as evidenced by the DMM2–6 selectivity of 11.3%. The NH3-TPD, Py-IR and XPS results indicate that the introduction of molybdenum increases the number of weak Lewis acid sites, while sulfuric acid impregnation not only generates gradient-distributed Brønsted acid sites but also promotes the formation of Mo5+/Mo6+ redox pairs. The cooperation of the two types of active sites significantly enhances catalyst performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60615-3
Co-pyrolysis of oil-rich coal and biomass is a promising route to enhance oil and gas production, yet the underlying synergistic mechanisms remain poorly understood. This study investigates the effect of hydrothermal pretreatment (HTP) on the co-pyrolysis of Huangling coal (H) and enzymatic hydrolysis lignin (E). Raw and pretreated samples were characterized via proximate/ultimate analysis, SEM, ICP-OES, and 13C-NMR. Fixed-bed pyrolysis experiments were conducted to evaluate synergistic performance. Results show that HTP reduces oxygen content, develops pore structure, and increases concentrations of inorganic metal ions (Ca, K, Fe) in the aqueous phase. Structural modifications bring the carbon skeleton of E closer to that of H, with increased bridge carbon ratio and improved thermal stability, aligning pyrolysis temperature ranges. For the H/E blend (8:2) after 24 h HTP, tar yield increases by 80.52% compared to untreated blend, with significant rises in aliphatic compounds and monocyclic aromatic hydrocarbons. Gas yields of H2, CO, and CH4 increase by 5.47%, 10.98%, and 9.27%, respectively, while CO2 and pyrolysis water generation are inhibited (water yield decreases by 93.98%). Semi-coke pore structure becomes more developed. The enhanced synergistic effect is attributed to a multi-fold mechanism of 'component interaction-structural modification-catalytic cracking'. These findings provide theoretical support for developing technologies to improve co-pyrolysis of oil-rich coal and biomass, advancing low-carbon, high-quality utilization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040104
The oxidative transformation of 2,6-dichlorophenol (2,6-DCP) was investigated in three typical zonal soils: black soil, red soil, and brown soil. Results demonstrated that 2,6-DCP underwent oxidative coupling in all soils, yielding hydroxylated polychlorinated diphenyl ethers (OH-PCDEs) and hydroxylated polychlorinated biphenyls (OH-PCBs) as primary products. The highest oxidative efficiency occurred in black soil, with approximately 85.1% of 2,6-DCP transformed within three days. In contrast, red and brown soils exhibited lower efficiencies, indicating a strong dependence on soil properties. Thermodynamic analysis revealed that the oxidative coupling reaction is endothermic, with elevated temperatures favoring reaction progress. Furthermore, soil microorganisms and dissolved oxygen were identified as critical controlling factors, acting synergistically to drive the reaction. This study provides the first evidence of natural oxidative coupling of 2,6-DCP in soil, forming OH-PCDEs and OH-PCBs. These findings offer significant scientific insight into the environmental fate of halogenated phenolic pollutants in terrestrial systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3915-8
Reactive oxygen species (ROS)-based antibiofilm therapy is limited by short ROS lifetime, restricted diffusion, and biofilm barriers. We designed a bacteria-targeted piezoelectric heterostructure (U-B/F) comprising boronic acid-functionalized UiO-66(Hf) (U-B) and carboxylated fullerene (C70-COOH). Boronic acid groups enable selective bacterial binding. Under ultrasound (US), the Z-scheme heterojunction enhances piezoelectric response and charge separation, amplifying sonocatalytic ROS generation. Fullerene acts as a peroxidase mimic, converting endogenous H2O2 into cytotoxic hydroxyl radicals (•OH). Additionally, favorable band alignment allows US-induced electron transfer from bacteria to U-B/F, disrupting bacterial electron transport and energy metabolism. Transcriptomic profiling confirmed bioenergetic collapse and oxidative stress. In vitro, U-B/F achieved 99.99% elimination of planktonic methicillin-resistant Staphylococcus aureus (MRSA) and 92.41% removal of mature biofilms. In MRSA-infected diabetic mice, U-B/F under US irradiation accelerated wound healing by eradicating infection, alleviating inflammation, and promoting tissue regeneration. This work provides a rational strategy for designing multifunctional nanomaterials integrating bacterial targeting, dual ROS catalysis, and electron transfer interference to combat biofilm-associated infections.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512052
Constructed wetlands (CWs) with conventional substrates often exhibit limited removal of nitrogen and antibiotics from secondary effluent. This study developed an iron-carbon-manganese ore (Fe-C-Mn) composite substrate CW to enhance simultaneous removal of nitrogen and tetracycline (TC). Under influent TC of 2 mg·L−1 and total nitrogen (TN) of 15 mg·L−1, the Fe-C-Mn system achieved average TC removal of 91.3%, significantly higher than the gravel control (27.2%). TN and nitrate nitrogen (NO3−-N) removals reached 71.7% and 83.3%, respectively, versus 7.8% and 1.2% in the control. Substrate analysis revealed increased surface roughness and synergistic generation of active components (Fe(II)/Fe(III) and Mn(II)), driving autotrophic denitrification and TC biodegradation/chemical degradation. Microbial community analysis indicated reduced overall diversity but selective enrichment of potential TC degraders (e.g., Trichosporon, Bacillota) and denitrifiers (e.g., unclassified_f_Rhodocyclaceae). TC degradation pathways included demethylation, hydroxylation, and ring-opening, ultimately yielding small metabolites. These findings provide theoretical and technical support for enhanced removal of antibiotics and nitrogen from secondary effluent using CWs.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3441-9
Stimuli-responsive room-temperature phosphorescence (RTP) materials face challenges in environmental robustness and spatiotemporal controllability, particularly for oxygen- and temperature-sensitive applications. Here, by taking advantage of the high oxygen-permeability barrier of polyvinyl alcohol (PVA) and its photochemical reaction toward certain polyaromatic hydrocarbons, we present phenanthrene- and triphenylene-doped PVA films that exhibit photoactivatable and persistent RTP, with an observable afterglow time >70 s by the naked eye, likely via a kinetically trapped radical pathway. Specifically, such UV-enhanced persistent RTP occurs under both aerobic and anaerobic conditions, contrasting with a regular RTP turn-on mechanism via photo-induced molecular oxygen depletion. The activated RTP state shows temperature-dependent kinetic persistence, i.e., lasting ~5 h at 25°C vs. ~72 h at 4°C, creating irreversible RTP switching from “on” to “off” ideal for cumulative temperature monitoring. The PVA-based ink patterns printed on perishables (e.g., fresh milk bottles) can be used to quantify ambient exposure via RTP decay kinetics (relative intensity loss >84.2% after 3 h at 25°C vs. at 4°C). The current study establishes a kinetic-control strategy for designing programmable RTP materials, addressing unmet needs in smart sensing and quality assurance.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3435-3
Semiconductor nanowires (NWs) have been extensively applied in light sources, waveguides, and photodetectors (PDs), providing abundant components for optoelectronic interconnection applications. However, the efficient in-plane integration of various devices remains challenging, which is a prerequisite for the practical application of NWs. Here, the growth-based integration of CsPbBr3 NW arrays with CdSSe ribbons transferred onto mica is achieved via a vapor deposition route. The transferred ribbons not only act as preferential nucleation sites for CsPbBr3, but also break the growth symmetry of CsPbBr3 NWs on mica, allowing wires with the largest angle to the ribbon edge to grow longer and form arrays. The waveguide studies show that the CsPbBr3 NW arrays can confine and guide the light emission from both themselves and the CdSSe ribbon well. Importantly, the optoelectronic interconnection was successfully demonstrated based on the achieved heterostructures, where the CsPbBr3 NWs served as the light source and waveguide, and PDs were made from the CdSSe ribbon. When a single CsPbBr3 NW was illuminated by a focused 457 nm laser at a distance of 37.5 μm from the CdSSe ribbon, the on/off ratio of the system reached 8.3×10^3, resulting from the efficient response of the PD to the guided light. Moreover, the system can distinguish the pulsed light excitation well below 2000 Hz, limited by the response speed of the PDs. This work paves the way for the on-chip integration of nanoscale light emitters, waveguides, and detectors, promoting the practical application of semiconductor NWs in photonic circuits.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3446-2
Mn-doped GeTe dilute magnetic semiconductors exhibit potential for mid-temperature thermoelectric applications, yet the mechanistic role of Mn in transport remains unresolved. This study characterizes the transport, magnetic, and lattice vibrational properties of Ge1−xMnxTe (x = 0–0.1) across 50–300 K. Mn incorporation reduces carrier concentration from ~1.2 × 10^21 cm−3 (x = 0) to ~4.5 × 10^20 cm−3 (x = 0.05) and amplifies electron scattering, yielding a two-fold increase in power factor to ~28 μW cm−1 K−2 at 300 K. Concurrently, Mn doping softens optical phonons and reduces phonon group velocity, suppressing lattice thermal conductivity to ~0.65 W m−1 K−1 at 300 K. Ferromagnetic ordering below ~120 K further depresses magnetic excitation phonon modes, contributing to the overall thermoelectric performance. These findings establish a dual electronic–thermal optimization pathway for GeTe-based dilute magnetic semiconductors.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3656-9
Multilayer two-dimensional (2D) materials offer expanded opportunities for tuning electronic, optical, and quantum properties compared to their monolayer forms. The number of layers, stacking configuration, and interlayer interactions are critical parameters that govern the physical behavior of these materials, enabling unique functionalities such as tunable bandgaps, interlayer excitons, sliding ferroelectricity, and unconventional superconductivity. This review highlights recent progress in the precise fabrication techniques of multilayer graphene, h-BN, and transition metal dichalcogenides. We compare artificial assembly techniques and direct growth strategies (chemical vapor deposition), emphasizing their advantages, limitations, and progress toward achieving uniform thickness, high crystallinity, and clean interfaces. The ability to engineer multilayer structures plays an essential role in improving device performance and realizing new quantum states of matter. By discussing fabrication strategies, growth mechanisms, and interlayer coupling effects, we highlight the significance of multilayer architecture in the development of functional 2D material systems.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3479-9
Marine biofouling, the attachment and accumulation of marine organisms on submerged anthropogenic structures, imposes substantial operational and environmental burdens on shipping, offshore engineering, and marine ecosystems. Traditional antifouling strategies, including mechanical scrubbing, ultrasonic removal, and heavy-metal ion electrolysis, are constrained by high cost, operational complexity, and ecological hazards. Antifouling coatings have emerged as a cost-effective alternative, yet early formulations based on asphalt, tar, and lead posed environmental risks, and tributyltin (TBT) self-polishing coatings were globally banned in 2008 due to toxicity and bioaccumulation. Hydrogel coatings have attracted considerable interest because of their biocompatibility, low toxicity, and environmentally friendly characteristics. This review synthesizes the application of hydrogel coatings in marine antifouling, systematically analyzing molecular design and network structure regulation achieved through various crosslinking strategies, and elucidating antifouling mechanisms. It summarizes antifouling performance in laboratory and field environments, examines composite and multifunctional hydrogel coatings for enhanced overall performance, and discusses developmental potential. Current limitations of hydrogel antifouling coatings are analyzed and future research directions proposed, intending to provide theoretical insights for effective and environmentally responsible marine antifouling solutions.