SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4322-4
Ultrafast scintillators with low-nanosecond emission are essential for next-generation high-rate X-ray and particle imaging. Although Ce3+-activated scintillators inherently exhibit fast response characteristics, conventional Ce3+-doped hosts rarely achieve low-nanosecond ultrafast decay. Here, we report a high-entropy fluoride scintillator (HEFS), Ce:LaGdCaSrBaF12 (Ce:LGCSB), in the form of bulk single crystals. The severe lattice distortion arising from multi-cation disorder induces exciton localization and effectively suppresses exciton diffusion. Through the rapid relaxation of localized excitons, the high-entropy Ce:LGCSB single crystals deliver a decay time of 1.23 ns with a 94.6% fast-component contribution and without any noticeable slow component. Through first-principles calculations, spectroscopic characterization, and transient dynamics analysis, we reveal that the ultrafast response originates from accelerated Frenkel exciton (FE) recombination enabled by the high-entropy environment. This work establishes entropy-engineered fluorides as promising ultrafast scintillator platforms and proposes a general strategy for extending sluggish diffusion effects to the excitonic scale, offering new opportunities for improving scintillation timing performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3696-3
The development of substitutable meniscus implants that can effectively protect articular cartilage remains a great challenge. Herein, a polyurethane with chemical crosslinking and sulfobetaine extenders containing hydrophobic chains (PU-CL-hSB) is developed, which could improve comprehensive properties and long-term stability simultaneously. By regulating the mole ratio of functional groups, PU-CL-hSB with appropriate mechanical properties, excellent tribological properties, and good fatigue resistance is used to prepare substitutable meniscus implant by hot-pressing. Due to the synergistic effect of functional groups, PU-CL-hSB meniscus implant presents comparable or even superior properties to native meniscus. It withstands a maximum force of 26.08 N versus 25.14 N for native meniscus, an energy dissipation from 45.93 to 39.17 N mm compared to 28.83 to 19.11 N mm for native meniscus over 300 cycles, and a friction coefficient from 0.08 to 0.19 compared to 0.11 to 0.26 for native meniscus. This PU-CL-hSB meniscus implant is further implanted into live rabbit knee joints for 8 and 25 weeks by a new approach, and in vivo data indicate that PU-CL-hSB meniscus implant not only protects articular cartilage from severe damage without eliciting inflammatory responses, but also can maintain normal physiological activities in the native state. Our findings present a substitutable meniscus implant that could be applied in vivo and propose evaluation methodologies for meniscus implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3654-5
Hydrogen production by photosynthetic green algae is an efficient biological process that utilizes light energy to convert water and carbon dioxide into clean and renewable energy. In this paper, we constructed a hybrid system combining graphitic carbon nitride (g-C3N4) and Chlorella pyrenoidosa (Chlorella), in which g-C3N4 serves as an extracellular electron source and Chlorella acts as a biological reactor for specific hydrogen production. In particular, the electronic structure of carbon nitride was optimized by means of hydrothermal alkalization and copper ion doping, expanded the light absorption range and enhanced the light response ability. g-C3N4, as an extracellular electron source, can provide electrons for Chlorella to improve hydrogen production performance which is 3.7 times that of bare Chlorella. The construction of a biological hybrid system is a feasible optimization strategy for the hybrid system to promote the synergistic effect of the hybrid system by regulating the properties of non-living components.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3730-3
Water scarcity, exacerbated by organic micropollutant contamination and climate change, necessitates energy-efficient, eco-friendly purification technologies. Membrane separation has emerged as a transformative solution, outperforming energy-intensive processes such as distillation. Traditional chemical separations, dominated by distillation, consume 10%–15% of global energy, whereas advanced membrane technologies can reduce energy use by up to 90%. However, membrane separation is hampered by reliance on toxic petrochemical feedstocks and persistent microplastic pollution from nonbiodegradable end-of-life membranes. Shao's group addresses both gaps with a sustainable nanofiltration membrane (SNFM) crafted entirely from low-hazard, renewable components. The substrate polylactic acid (PLA), a biodegradable polyester derived from corn starch, is processed via modified nonsolvent-induced phase separation (NIPS) to form a porous yet strong support. For the selective layer, toxic aromatic monomers are replaced with xylitol (a plant sugar alcohol) and dopamine (DA, a biogenic amine), and green solvents such as dimethyl sulfoxide are used to avoid volatile organic compound emissions. Compared with commercial alternatives, this design yields a membrane with exceptional dual functionality: it maintains high separation performance (928% greater permeance, 92% bisphenol A rejection, and 89% Na2SO4 rejection) and low fouling (protein adsorption ≤12 μg cm−2) over 30 days. A life cycle assessment reveals a 62% reduction in carbon footprint compared with petrochemical-based membranes, whereas soil biodegradation tests confirm 90% breakdown within 6 months, driven by Delftia and Tissierella microbes. By eliminating microplastic waste and toxic inputs, this SNFM bridges the divide between performance and environmental responsibility, offering a scalable blueprint for next-generation green membranes in water treatment and beyond.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025122102
Uranium is a key resource for nuclear energy, but its mining and processing generate large amounts of uranium-containing wastewater, posing persistent threats to the environment and human health. In this study, a cyano-functionalized C3N4/ZnIn2S4 (CCN/ZIS) heterojunction system was constructed for efficient removal of U(VI) from uranium mining wastewater. The introduction of cyano groups significantly enhanced the adsorption capacity of CCN/ZIS, reaching a maximum of 123.65 mg·g−1. Characterization techniques (UV-vis DRS, EIS, i-t, PL, TRPL) confirmed that cyano groups effectively suppress charge carrier recombination, improving photogenerated carrier separation. Under visible light, the modified material achieved over 95% removal of U(VI) within 10 minutes, demonstrating a 20-fold efficiency increase compared to pristine materials. Even in simulated uranium mining wastewater containing high concentrations of CO3^2− and F−, CCN/ZIS maintained excellent performance, overcoming the technical challenge of U(VI) removal efficiency being constrained by water quality conditions. Quenching experiments identified e− and ·O2− as the primary reactive species responsible for U(VI) reduction. This study reveals the synergistic mechanism of selective U(VI) enrichment and photoreduction, providing theoretical innovation and technological breakthroughs for uranium pollution control.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61094-3
Aqueous zinc-iodine (Zn-I2) batteries are promising for large-scale energy storage due to their intrinsic safety, low cost, and high theoretical capacity (211 mAh g−1 for iodine). However, their practical application is hindered by the poor electronic conductivity of iodine, sluggish redox kinetics, and the shuttle effect of polyiodides. This review systematically analyzes the reaction mechanisms of iodine cathodes, including two-electron (I−/I2) and multi-electron (I−/I2/I+ and I−/I2/I+/IO3−) pathways, and identifies key bottlenecks. It then comprehensively summarizes recent advances in iodine host materials, categorized into three strategies: physical confinement, chemical adsorption, and electrocatalysis. Representative host materials such as porous carbons, covalent organic frameworks (COFs), porous aromatic frameworks (PAFs), polymers, MXenes, and Prussian blue analogs (PBAs) are discussed, with emphasis on the structure–performance relationships. The review highlights that heteroatom doping (e.g., nitrogen) enhances chemical adsorption of iodine species, while single-atom catalysts (e.g., Co, Zn) provide electrocatalytic sites that accelerate conversion kinetics. Finally, future research directions are proposed, including exploration of multi-electron systems, mechanistic elucidation of iodine conversion, development of advanced host materials, and optimization of zinc anodes, to accelerate the commercialization of Zn-I2 batteries.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605007
Reservoirs are significant sources of nitrous oxide (N2O), a potent greenhouse gas. The nosZ-type denitrifying bacteria, which reduce N2O to inert N2, play a critical role in mitigating emissions. This study investigated the community structure, diversity, and abundance of nosZ-type denitrifiers in surface sediments (0-15 cm) from 18 reservoirs in the northeastern Qinghai-Tibet Plateau, including 10 in the Yellow River mainstem and 8 in the Huangshui River basin. Sampling occurred during dry (May 2023) and wet (August 2023) seasons. High-throughput sequencing of the nosZ gene and quantitative PCR were employed. Results showed that Proteobacteria dominated (78.91%). Paracoccus and Halomonas were biomarkers in the Yellow River mainstem. Diversity was significantly higher in the Huangshui basin (P<0.05), with no temporal difference. Gene abundance was higher in the Huangshui basin (165.24×10^5 copies/g) than in the Yellow River mainstem (34.43×10^5 copies/g), and higher in wet season (128.55×10^5 copies/g) than dry season (61.27×10^5 copies/g) (P<0.05). Redundancy analysis and hierarchical partitioning identified sediment temperature, pH, total phosphorus, and water total nitrogen as key drivers, explaining 17.14%, 16.89%, 13.83%, and 11.23% of community variation, respectively. These findings reveal significant spatiotemporal heterogeneity and provide a scientific basis for N2O mitigation in plateau reservoirs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3842-8
The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3915-8
Reactive oxygen species (ROS)-based antibiofilm therapy is limited by short ROS lifetime, restricted diffusion, and biofilm barriers. We designed a bacteria-targeted piezoelectric heterostructure (U-B/F) comprising boronic acid-functionalized UiO-66(Hf) (U-B) and carboxylated fullerene (C70-COOH). Boronic acid groups enable selective bacterial binding. Under ultrasound (US), the Z-scheme heterojunction enhances piezoelectric response and charge separation, amplifying sonocatalytic ROS generation. Fullerene acts as a peroxidase mimic, converting endogenous H2O2 into cytotoxic hydroxyl radicals (•OH). Additionally, favorable band alignment allows US-induced electron transfer from bacteria to U-B/F, disrupting bacterial electron transport and energy metabolism. Transcriptomic profiling confirmed bioenergetic collapse and oxidative stress. In vitro, U-B/F achieved 99.99% elimination of planktonic methicillin-resistant Staphylococcus aureus (MRSA) and 92.41% removal of mature biofilms. In MRSA-infected diabetic mice, U-B/F under US irradiation accelerated wound healing by eradicating infection, alleviating inflammation, and promoting tissue regeneration. This work provides a rational strategy for designing multifunctional nanomaterials integrating bacterial targeting, dual ROS catalysis, and electron transfer interference to combat biofilm-associated infections.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512066
This study addresses the removal of ammonia nitrogen (NH4+-N) and chemical oxygen demand (COD) from real coal chemical wastewater via electrochemical chlorine evolution. A nanorod-structured ruthenium dioxide catalyst (N-RuO2) was synthesized by modifying ruthenium trichloride precursor with ammonium chloride. Compared with unmodified RuO2, commercial DSA, and commercial RuO2 (Com-RuO2), N-RuO2 exhibited significantly enhanced electrochemical performance: Faradaic efficiency for chlorine evolution increased by 12.9%, 18.5%, and 25.6%, respectively; accelerated lifetime improved by 1.7, 1.9, and 2.9 times, respectively. In treating real coal chemical wastewater, N-RuO2 reduced NH4+-N to 86.4 mg·L−1 and COD to 72 mg·L−1, with degradation rate constants approximately 2.08 and 1.46 times higher than Com-RuO2, while energy consumption decreased by 17.7 Wh·g−1 and 1.5 Wh·g−1, respectively. Further studies showed that increasing chloride ion concentration enhanced removal rates and reduced energy consumption; higher current density accelerated removal but increased energy use; alkaline conditions favored NH4+-N removal, while neutral conditions favored COD removal. The excellent electrochemical performance of RuO2 nanorods indicates broad application prospects in practical water treatment.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60672-X
Dry reforming of methane (DRM) converts CH4 and CO2 into syngas, offering a route to mitigate greenhouse gases. Ni-based catalysts suffer from sintering and carbon deposition at high temperatures. This work employs MgO-MgAl2O4 composite supports to regulate Ni loading and introduces Ce, La, and Zr as promoters to investigate their effects on DRM activity, structural stability, and surface oxygen species. Optimal Ni loading of 12.5% yields highest CH4 and CO2 conversions. Promoter introduction slightly suppresses low-temperature activity but substantially modifies support local structure and metal-support interface, improving NiO dispersion and increasing surface oxygen vacancies and active oxygen species (Oβ). These changes enhance CO2 adsorption-activation and suppress carbon deposition. After 20 h DRM, Ce-promoted catalyst shows smallest Ni particle growth (6.23→8.07 nm) and lowest carbon deposition, demonstrating superior stability and anti-coking capability. The study elucidates how Ce, La, and Zr enhance sintering and coking resistance via interfacial electronic modulation and improved oxygen storage/release, guiding rational design of stable Ni-based DRM catalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608006
Organic waste is a potential phosphorus reservoir, and understanding the dynamics of available phosphorus (AP) during its resource utilization is critical for efficient phosphorus recovery. Composting, a key route for organic waste valorization, involves complex transformations of phosphorus alongside organic matter degradation and humification. However, the long duration and high cost of composting experiments, coupled with multifactorial influences, hinder efficient elucidation of AP dynamics via conventional methods. This study compiled data from 33 publications, constructing a dataset of 647 samples. Data preprocessing included iterative imputation, one-hot encoding, and standardization. A stacking ensemble learning model was developed to predict AP generation during composting. The optimal ensemble comprised XGBoost and SVR as base learners and ElasticNet as the meta-learner, achieving R² values of 0.954 and 0.928 on training and test sets, respectively, with low overall error. SHAP analysis revealed that key factors influencing AP content, in descending order of importance, were feedstock type, bulking agent type, turning interval, pH, electrical conductivity (EC), and C/N ratio. Notably, livestock manure as feedstock and straw-based bulking agents contributed positively to AP predictions. Partial dependence plots indicated that lower pH and C/N ratios generally favored AP accumulation throughout composting. During the initial stage, higher moisture content and lower EC enhanced AP; in the thermophilic phase, higher temperatures corresponded to higher AP; and during cooling and maturation, maintaining moisture below 48% and C/N below 14, while extending composting beyond 43 days, promoted AP accumulation. This study demonstrates accurate AP prediction via stacking ensemble learning and identifies critical factors, offering support for optimizing phosphorus management in composting engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4074-6
Achieving carbon neutralization relies heavily on green hydrogen and electrochemical carbon-nitrogen cycles. However, the complexity of these systems and the cost of traditional Edisonian trial-and-error methods hinder rapid progress. Artificial intelligence (AI) has emerged as a transformative tool, enabling high-throughput data processing and dynamic adaptation. This review surveys the landscape of AI-driven electrochemistry, bridging the gap from atomic-scale design to industrial-scale implementation. Specifically, we focus on three areas: atomic structure-function decoding, fully automated “self-driving” laboratories, and macro-scale simulations for device durability. Furthermore, we elucidate the critical challenges in integrating AI with materials science. By mapping current trends and future directions, this work aims to unlock the full transformative potential of AI in next-generation energy storage and conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4150-2
Bacterial infection and irregular wound morphology are major challenges in clinical wound management. Injectable hydrogels can conform to irregular wound geometries but often lack antimicrobial activity. Here, we report an injectable hydrogel (HPAu gel) formed by sequentially mixing phenylboronic acid-modified hyaluronic acid (HA-PBA) and chloroauric acid under alkaline conditions. The gel's internal multiple crosslinks enable uniform encapsulation of in situ-generated gold nanoparticles. Hydrogen bonds and phenylboronic acid ester bonds confer self-healing, injectability, and adhesion, allowing effective sealing of irregular cavities. In vitro, the hydrogel exhibits long-lasting photothermal stability and eliminates multiple bacterial strains. In a mouse dorsal full-thickness infected wound model, HPAu gel under near-infrared (NIR) irradiation eradicated Staphylococcus aureus, reduced inflammation (TNF-α fluorescence area significantly lower; IL-10 area 12.88‰ vs <2‰ in Blank), promoted vascular regeneration (CD31 and α-SMA expression increased), and accelerated wound healing. This work presents a promising strategy for treating irregular infected wounds.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3643-8
Inverted perovskite solar cells (PSCs) suffer from defect-mediated nonradiative recombination and inefficient charge extraction, particularly at the buried interface and grain boundaries (GBs), which limit power conversion efficiency (PCE) and operational stability. This study introduces a multifunctional phosphonic acid molecule, (2-(3,6-bis(trifluoromethoxy)-9H-carbazol-9-yl)ethyl)phosphonic acid (M28), as an additive in the perovskite precursor solution. M28 spontaneously segregates toward the buried interface and GBs, fulfilling three roles: (1) slowing crystallization to enlarge grains and improve film quality, (2) passivating defects to suppress charge recombination, and (3) inducing p-type doping to create an extra electric field that promotes hole transport. Devices incorporating M28 achieve a champion PCE of 25.96% and retain 80% of initial efficiency after 1500 h of maximum power point tracking. This work demonstrates the efficacy of multifunctional phosphonic acid additives in addressing buried-interface and GB defects, offering a viable route to high-performance, stable inverted PSCs.