SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4384-9
Nanovesicle-hybridized hydrogels constitute a class of bioactive materials that integrate the structural stability of polymer networks with the intrinsic biological functions of nanoscale vesicles. Conventional hydrogels suffer from swelling-induced mechanical degradation, uncontrollable cargo release, and an inability to integrate multiple bioactivities. Hybridization with nanovesicles provides a robust solution to these limitations. This review systematically delineates the evolution of construction strategies, transitioning from simple physical entrapment to advanced chemical crosslinking involving noncovalent supramolecular interactions and covalent conjugation. We elucidate how these integration methods fundamentally enhance mechanical strength, enable spatiotemporally controlled release of vesicles and their cargos, and endow composite systems with multifaceted bioactivities. The diverse biomedical applications of these hybridized platforms in drug delivery, tissue engineering, and disease therapy are thoroughly discussed. Current technical hurdles in clinical translation and promising future directions are identified, providing a roadmap for the next generation of intelligent biomimetic materials. The review emphasizes that the shift from physical doping to chemical crosslinking represents a paradigm change, yielding composites with superior mechanical resilience and programmable release kinetics. By critically assessing the trade-offs between crosslinking density, vesicle integrity, and payload retention, this work offers a framework for designing hybrid systems with tailored properties. Key challenges include scalable manufacturing, long-term stability, and regulatory hurdles. The analysis underscores that clinical translation demands standardized protocols for vesicle isolation, crosslinking efficiency, and sterility assurance. This review serves as a benchmark for researchers and engineers aiming to bridge the gap between laboratory-scale fabrication and industrial production of nanovesicle-hybridized hydrogels.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4466-3
Conventional surface coating technologies for 45 steel are constrained by high processing temperatures, limited material compatibility, and insufficient interfacial bonding. This study introduces ultrasonic vibration-assisted mechanical coating (UVAMC) as a low-temperature deposition route that mitigates these limitations. The process yields a chromium coating on 45 steel with a nanoscale elemental interdiffusion transition layer at the interface, achieving a bonding strength of 66.0 MPa. The coating delivers improved corrosion resistance in aggressive environments while preserving the substrate's original compressive and tensile strength. The method also demonstrates broad process adaptability, successfully depositing copper, aluminum, and 316 stainless steel powders, and forming complex shapes such as the "SZU" pattern. These results establish UVAMC as a viable surface functionalization strategy for metallic materials, combining efficient deposition with operational flexibility.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4293-9
Traditional soft magnetic alloys (SMAs) suffer from a performance trade-off where enhancing magnetic properties often compromises mechanical and other properties, limiting their use in high-efficiency power systems and advanced electronics. The design concept of medium- and high-entropy alloys (M/HEAs) offers a pathway to overcome this limitation. By leveraging multi-principal-element compositions and tailorable microstructures, medium- and high-entropy soft magnetic alloys (M/HE-SMAs) can integrate superior soft magnetic properties with exceptional mechanical strength-ductility synergy, high electrical resistivity, good thermal stability, and excellent corrosion resistance. This article reviews design strategies for synergistic enhancement of multiple properties in M/HE-SMAs, including blending multiple ferromagnetic and non-ferromagnetic elements into solid solution, inducing local chemical order, tailoring nanoprecipitates, controlling grain size, and engineering dual/multi-phase structures. The cooperative interactions among these strategies are discussed. Potential research directions for further development and practical applications are proposed.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3660-5
High-sensitivity piezoelectric ceramics with high piezoelectric constants (d33) are crucial for miniaturized, low-power, and high-efficiency transducers. However, conventional performance enhancement relies on intrinsic parameter modulation, which is limited and blind. This study introduces a performance-driven metamaterials creation model to develop structure-function-integrated piezoelectric materials. We systematically investigated the effects of metastructure design on d33 across two-dimensional straight rod (SR) structures, three-dimensional dot-matrix (Octa) structures, complex triply periodic minimal surface (TPMS) structures, and hybrid Octa&SR structures. The results demonstrate that metastructures combining high polarization charge conversion efficiency with low compression modulus (stiffness) effectively enhance d33. The SR structure exhibited optimal polarization charge conversion, the Fks-Shellular (FksS) structure within TPMS showed low stiffness, and the Octa&SR structure combined both properties. Notably, all three structures displayed exceptional piezoelectric performance. Specifically, the FksS structure achieved a substantial d33 of 194 pC/N, a 24% enhancement over conventional solid BaTiO3, while maintaining isotropic and stress-insensitive properties. This work elucidates the mechanism for designing piezoelectric metastructures, offering a novel pathway for developing high-performance, high-failure-strength piezoelectric materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3604-1
Piezoelectric materials convert mechanical energy into electrical signals, enabling applications in sensors, actuators, and energy harvesting. Inorganic ceramics like PZT and BTO exhibit excellent piezoelectric properties but are brittle, limiting their use in flexible electronics. This work presents a porous composite of PZT@carboxymethyl chitosan (CMCS) in thermoplastic polyurethane (TPU). The core-shell structure enhances interfacial compatibility, while the porous TPU skeleton facilitates stress transfer and amplification, allowing high piezoelectric content. The resulting PZT@CMCS/TPU devices achieve an output voltage of 53 V and current of 13 μA, an 11-fold improvement over conventional PZT composite films. This approach enables flexible piezoelectric devices with high performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3714-3
Eco-friendly aqueous zinc batteries (AZBs) are promising alternatives to lead-acid batteries in applications requiring both safety and energy density. However, their practical deployment is hindered by the synergistic deterioration of zinc anodes—structural collapse and kinetic failure—under high depth of discharge (DOD) and high current densities, which severely limits actual energy and power densities. Here, we report a strategy for the in situ integration of a double-layer topological chitosan framework (D-CTS) on current collectors via regulating phase separation kinetics during multistage coordination-neutralization electrophoresis. The vertical through-hole array is formed by coupling instantaneous and delayed phase separation. Subsequently, a columnar zinc array is mediated by D-CTS to construct an integrated component (D-CTS-Zn) comprising a vertical through-hole separator and an array anode. The embedded interconnected nanonetworks within the through-hole walls enable dynamic equilibrium of the columnar zinc array through a lateral ion compensation mechanism. As a result, Zn||Zn symmetric cells with D-CTS-Zn stably cycle over 3000 cycles at 200 mA cm−2 under 60% DOD. The assembled D-CTS-Zn||MnO2 battery delivers an energy density of 83 Wh kg−1 at an ultrahigh power density of 9.25 kW kg−1. This work provides a constructive strategy for chitosan phase separation regulation and separator-induced reversible metal array anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3506-3
Metallic glasses (MGs) often suffer from sluggish hydrogen evolution reaction (HER) kinetics in neutral and alkaline media, with their catalytic performance predominantly confined to acidic environments. Herein, we reported a novel thermoplastic forming technique to fabricate a self-supported partially crystallized nanoporous Pt56.2Ni5.2Cu16.8P21.8 metallic glass (C-NPMG). The C-NPMG catalyst delivers ultralow overpotentials of 18.0 mV (0.5 M H2SO4), 42.2 mV (1 M KOH), and 88.0 mV (1 M phosphate-buffered saline (PBS)) at a current density of 10 mA cm−2, outperforming most state-of-the-art non-noble MGs and Pt-based benchmarks across all pH conditions. Notably, it maintains negligible performance decay for over 1000 h in alkaline electrolytes, showcasing superior stability. Experimental and computational analyses reveal that the enhanced HER activity arises from three synergistic effects: (1) the high-specific-surface-area nanoporous architecture that maximizes active site exposure; (2) the formation of crystallite-amorphous interfaces during partial crystallization, which lowers the energy barrier for H2 desorption; (3) the hierarchical super-hydrophilic and super-hydrophobic wettability of the C-NPMG, which optimizes mass transport and prevents electrolyte-induced corrosion. This work establishes a novel design paradigm for developing high-performance, pH-universal HER electrocatalysts by integrating structural nano-engineering and crystallite-amorphous phase synergy in metallic glass systems to overcome the trade-offs between performance and stability in electrochemical water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3759-7
The inherent strength-ductility trade-off in materials science poses a significant challenge for structural applications. In composites, rational regulation of reinforcement structure and distribution can enhance both strength and ductility. Typical structures such as network, layered, and columnar have proven effective, yet issues like narrow size ranges, uneven distribution, and weak interfacial bonding limit performance. Here, we present a bioinspired multi-scale heterogeneous layered composite (MHLC) that achieves an optimal balance between strength and ductility. This heterogeneous layered structure comprises alternately stacked Cu-Ti layers and GNPs/Cu layers. The Cu-Ti layer contains uniformly distributed plate-like β-Cu4Ti intermetallic compounds, while the GNPs/Cu layer contains layered graphene nanoplatelets (GNPs). The size, distribution, and shape of reinforcements can be adjusted through heat treatment and cold rolling, enabling a balance between strength and ductility. Molecular dynamics simulation and finite element simulation were conducted to investigate the structural evolution of β-Cu4Ti and the influence of reinforcements on tensile properties, respectively. Results show that under tensile deformation, high-strain regions in the Cu-Ti layer are more numerous than in the GNPs/Cu layer. At an applied strain of 7.96%, fracture and deformation of reinforcements occur; at 23.98%, voids appear and develop into cracks. Cracks propagate along high-strain paths, forming a zigzag fracture pattern at the interface, indicating high interfacial bonding strength. The bending deformation of β-Cu4Ti suggests it possesses high hardness, strength, and excellent toughness. Our results provide important references for exploring multi-scale heterogeneous layered structures in enhancing strength and ductility of composites.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3727-0
Lead halide perovskites are promising scintillators for X-ray imaging due to high X-ray absorption efficiency, excellent luminescence, and facile synthesis. However, their ionic nature challenges simultaneous high photoluminescence efficiency and environmental robustness. This work introduces a multilevel encapsulation strategy: CsPbBr3 quantum dots (QDs) are sequentially coated with Cs4PbBr6, SiO2, and polydimethylsiloxane (PDMS). Cs4PbBr6 passivates surface defects, while SiO2 and PDMS provide barriers against moisture, heat, and radiation. The resulting CsPbBr3@Cs4PbBr6/SiO2/PDMS flexible films exhibit a photoluminescence quantum yield (PLQY) of 85%, outstanding mechanical flexibility, and durability under stretching, bending, and compressing. Films retain emission stability under elevated temperatures, prolonged X-ray irradiation, and extended water immersion. X-ray imaging demonstrates spatial resolution of 12 lp/mm, enabling distortion-free imaging of curved objects; superior water resistance allows long-term underwater imaging. This work highlights hierarchical encapsulation in balancing luminescence efficiency and stability, offering a pathway toward practical flexible perovskite scintillators.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025073004
Micro/nano-plastics (MNPs) are emerging contaminants widely detected in human circulatory systems, including blood, heart, and vascular endothelium, raising concerns about cardiovascular health risks. This systematic review analyzed 61 peer-reviewed studies (2008–2024) to elucidate the cardiotoxic effects and molecular mechanisms of MNPs. Evidence indicates that MNPs exposure elevates risks of atherosclerosis, thrombosis, and arrhythmias through oxidative stress, inflammatory cascades, endothelial dysfunction, and metabolic dysregulation. Notably, co-exposure with persistent organic pollutants (POPs) or heavy metals may produce synergistic or antagonistic effects. Current research relies predominantly on animal and cell models, with critical gaps in low-dose, long-term exposure data and epidemiological evidence. Future studies should optimize experimental designs, integrate metabolomics and epigenetics, and explore transgenerational effects and combined toxicity mechanisms to inform pollution control policies and mitigate cardiovascular risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010402
Vegetable consumption is a well-established pathway for human exposure to per- and polyfluoroalkyl substances (PFAS). These contaminants are absorbed by vegetables through uptake from soil and irrigation water, leading to bioaccumulation within plant tissues and posing potential risks to human health. Therefore, monitoring PFAS concentrations in vegetables is critical for assessing dietary exposure and associated health risks. In this study, a solid-phase extraction (SPE) followed by ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed for the determination of 24 PFAS compounds in leafy vegetables, including Shanghai Bok Choy, Cabbage, and Water Spinach. The analytical method, incorporating organic solvent extraction followed by SPE cleanup, was optimized with respect to both extraction solvent and SPE sorbent. Alkaline methanol was used as the extraction solvent, and PFAS in vegetables were extracted via vortex-assisted extraction. Tandem mass spectrometry was used for detection in multiple reaction monitoring mode, and quantification was performed by internal standard method. Under optimized conditions, at a spiking level of 2 ng, recoveries ranged from 50.0% to 120.8% with relative standard deviations (RSD) between 1.0% and 26%. Calibration curves showed good linearity with correlation coefficients (r) greater than 0.99. Limits of detection (LOD, S/N=3) were between 0.002 and 0.103 ng·g−1, and limits of quantification (LOQ, S/N=10) were between 0.007 and 0.343 ng·g−1. The method was applied to real samples, detecting 20 PFAS, with 10 compounds showing 100% detection frequency. Total PFAS concentrations ranged from 2.92 to 6.83 ng·g−1 dry weight (dw). Perfluorobutanoic acid (PFBA) was the dominant contaminant, with concentrations from 1.18 to 3.74 ng·g−1 dw. The method demonstrates good sensitivity and accuracy, effectively identifying and quantifying multiple PFAS, thus providing reliable technical support for monitoring PFAS in vegetables.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025110501
Ultrashort-chain perfluoroalkyl substances (PFAS) exhibit high hydrophilicity, mobility, and root concentration factors, facilitating their transport and accumulation in soil-crop systems and posing phytotoxicity risks. Post-drought rehydration (PDR) is a critical water management strategy to mitigate drought effects in paddy fields. This study investigated the regulation and mechanisms of PDR on ultrashort-chain PFAS transport in paddy soils through sterilized and non-sterilized experiments, employing three-dimensional fluorescence spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray fluorescence spectroscopy, and amplicon sequencing. Results showed that PDR increased the bioavailable fraction of ultrashort-chain PFAS in soil solution while delaying their release into overlying water. Sterilization experiments confirmed that PDR-induced compensatory migration was primarily driven by microbial activity. Geochemical analyses revealed that PDR reduced hydrophilic functional groups (e.g., hydroxyl) on soil particle surfaces and increased cation bridging sites. Microbiological sequencing indicated that PDR activated secondary metabolic pathways, enhancing microbial extracellular polymeric substances (EPS) production, which provided binding sites for ultrashort-chain PFAS. Consequently, EPS competed with soil particles for cation bridging, altering PFAS interfacial partitioning and increasing bioavailable and cation-complexed fractions in soil solution, thereby exacerbating rhizosphere exposure risk to rice. This study elucidates the coupled geochemical and microbiological mechanisms governing ultrashort-chain PFAS mobility under PDR, informing risk assessment and management in paddy agroecosystems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025102002
The ultraviolet/chlorine (UV/Cl2) advanced oxidation process generates multiple radical species, enabling synergistic disinfection. However, the systematic influence of UV intensity on process performance remains inadequately characterized. This study investigated UV intensities from 0.25 to 2.0 mW·cm−2, assessing chlorine photolysis kinetics, bacterial inactivation, and disinfection by-product (DBP) formation. Results demonstrate that inactivation efficiency is not solely governed by total UV energy but is co-regulated by reaction kinetics and mass transfer. Increasing UV intensity accelerated chlorine photolysis by 33.7%–277.8%, elevating steady-state concentrations of hydroxyl radicals and chlorine radicals by factors of 1.6–3.8 and 1.3–3.2, respectively, thereby enhancing initial inactivation rates. However, higher intensities reduced cumulative chlorine exposure (CT value) to 14.3%–55.7% of baseline, causing overall inactivation to first increase then decrease. At a fixed UV dose of 150 mJ·cm−2, an intensity of 1.0 mW·cm−2 achieved optimal 6.5-log inactivation of Escherichia coli and the lowest bacterial reactivation rate (0.07%). Common water constituents (HCO3−, Cl−, natural organic matter) inhibited disinfection, with natural organic matter exerting the strongest suppression (2.7-log reduction). Notably, 1.0 mW·cm−2 exhibited the greatest resistance to interference. Elevated intensity reduced total organic halogen formation from 33.7 μg·L−1 to 19.0 μg·L−1. Balancing disinfection efficacy and DBP risk, 1.0 mW·cm−2 is identified as the optimal UV intensity for the UV/Cl2 process in sand-filtered water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3829-7
Circularly polarized luminescence (CPL) is pivotal for advanced photonic applications, yet achieving concurrent high emission efficiency and large dissymmetry factors remains challenging. Here, we report a chiral reticular chemistry strategy to construct homochiral porous metal-organic frameworks (MOFs) as efficient CPL-active materials. By co-assembling enantiopure R/S-binol with achiral luminescent ligands, three pairs of enantiomeric pillar-layered MOFs were synthesized. These frameworks exhibit significantly amplified CPL responses, with |g_lum| values enhanced by up to two orders of magnitude compared to free ligands, reaching levels comparable to state-of-the-art chiral assemblies, while maintaining high photoluminescence efficiencies (Φ_PL up to 67%). Mechanistic investigations reveal that CPL originates primarily from the global chirality of the hierarchical frameworks rather than the intrinsic chirality of the precursors. This work establishes a robust design principle for porous CPL-active materials, offering new insights into chirality transfer and opening avenues to integrate strong luminescence with stable chirality in extended frameworks.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509095
Biotrickling filtration (BTF) is a promising technology for treating volatile organic compounds (VOCs), but its application to hydrophobic alkanes like isohexane is hindered by mass transfer limitations, low degradation efficiency, and high operational costs. To address these bottlenecks, this study developed composite fillers by incorporating biochars derived from coffee grounds (CG), coconut shells (CS), corn cobs (CC), and activated carbon (AC) into a polyvinyl alcohol-sodium alginate (PVA-SA) hydrogel matrix. The fillers were systematically characterized for water retention, pore structure, surface functional groups, crystalline phase, and acid-base resistance. Adsorption capacity, biofilm formation, and isohexane degradation were evaluated using the strain Rhodococcus ruber ZYH-ZY. Among the composites, CG@PVA-SA exhibited superior performance: water retention of 358 mg·g−1 (vs. 280 mg·g−1 for control), enhanced mesoporosity (specific surface area 4.77 m2·g−1, pore volume 11.46 cm3·kg−1, 10–30% higher than control), and robust acid-base stability (mass loss 21.37% at pH 2 and 31.98% at pH 10). Its saturated adsorption capacity reached 201.02 mg·kg−1 (vs. 114.24 mg·kg−1 for control), and it promoted bacterial colonization with a survival rate of 79.0% (vs. 37.2% for control). Static degradation tests showed 96.59% removal of 10 μL isohexane within 24 h. The abundant polar functional groups and suitable mesoporous structure of coffee ground biochar synergized with the PVA-SA matrix, enhancing water retention, mass transfer, and microbial colonization, thereby significantly improving isohexane purification. CG@PVA-SA is an ideal filler for BTF treatment of alkane VOCs, offering a cost-effective and efficient solution for industrial VOC control.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025112603
The cycloaddition of carbon dioxide (CO2) to epoxides (CCE) is a 100% atom-economical transformation yielding cyclic carbonates, which are valuable chemical products. This reaction valorizes CO2 as a carbon feedstock, mitigating the greenhouse effect and aligning with carbon neutrality goals. Conventional covalent organic framework (COF) catalysts often require co-catalysts to achieve high efficiency. To address this, we designed and prepared a series of ionic COFs, denoted EB-BT(nOH), that simultaneously incorporate acid (hydroxyl), base (nitrogen), and nucleophilic bromide (Br−) functionalities. These materials efficiently catalyze the CCE reaction without any co-catalyst. Among them, EB-BT(OH) exhibited the highest catalytic activity, achieving a 99% yield of the target product at 120 °C and 2.0 MPa CO2 pressure. By systematically varying the hydroxyl content in the COF backbone, we investigated the critical role of hydrogen bond donors (HBDs) in the CCE reaction. This work provides new design principles for COF-based catalysts for CCE, eliminating the need for co-catalysts and enhancing process sustainability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026011902
The migration of perfluoroalkyl and polyfluoroalkyl substances (PFASs) at the water–soil interface in paddy fields is a critical determinant of their environmental fate and crop safety. This study investigated the influence of low-molecular-weight organic acids (LMWOAs) on PFASs mobility under waterlogged conditions. Four LMWOAs—oxalic, citric, lactic, and acetic acids—were individually enriched in paddy soils, and the migration of 15 PFASs was monitored. Acetic acid enrichment most strongly suppressed PFASs release into overlying water. Mechanistic analyses using X-ray photoelectron spectroscopy, three-dimensional excitation–emission matrix spectroscopy, microbial amplicon sequencing, and metagenomics revealed that acetic acid reshaped the microbial community, enriching sulfate-reducing bacteria and upregulating sulfur reduction genes (SULT1A) and nitrogen transformation genes (nifN, nirI, nthB). This drove sulfate reduction to sulfite and sulfide. ABT modeling identified sulfur metabolism as the dominant factor controlling PFASs immobilization (26.06% contribution). Experiments under varying sulfur redox conditions confirmed that sulfite (SO3^2−) oxidation indirectly altered dissolved organic matter (DOM) composition, weakening PFASs–DOM binding and reducing PFASs in overlying water. These findings demonstrate that LMWOAs accumulation, particularly acetic acid, can effectively impede PFASs migration at the paddy water–soil interface via microbial sulfur cycling and associated DOM structural changes, offering a potential strategy for PFASs remediation in agricultural systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3820-5
Two novel N-heterocyclic carbene (NHC)-based ligands featuring rigid boron-oxygen (BO) fused-ring units, named Bpmi and Bpmb, and the two corresponding homoleptic meridianal iridium complexes, namely mer-Ir(Bpmi)3 and mer-Ir(Bpmb)3, were designed and synthesized. Single-crystal structures revealed a meridional coordination geometry for both complexes. Shorter Ir–C carbene bond lengths and rigid planar BO-fused ring units contribute to enhanced stability. Both complexes exhibit efficient green phosphorescence (λem = 536/521 nm in toluene, ΦPL > 78%) with short lifetimes (τ = 846/1083 ns), leading to high radiative rate constants (Kr = 10.04 × 10^5 and 7.29 × 10^5 s−1, respectively). Theoretical calculations indicate significantly increased metal-to-ligand charge transfer (MLCT) character (21.69% for mer-Ir(Bpmi)3; 17.30% for mer-Ir(Bpmb)3) compared to reference complexes (13.01% for mer-Ir(pmi)3; 15.99% for mer-Ir(pmb)3). Both complexes exhibit exceptional thermal stability with decomposition temperatures of 491°C (mer-Ir(Bpmi)3) and 540°C (mer-Ir(Bpmb)3). OLED devices using mer-Ir(Bpmb)3 and mer-Ir(Bpmi)3 as emitters demonstrate maximum external quantum efficiencies of 20.0% and 15.6%, respectively. This research pioneers boron-fused ring-containing NHCs and their phosphorescent iridium(III) complexes, establishing a novel design strategy for high-performance NHC-based OLED phosphorescent emitters.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026041402
Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants ubiquitously distributed in paddy soils. In paddy management, surface water irrigation introduces quinolone antibiotics (QNs) into the soil, potentially altering PFAS interfacial migration via microbial community shifts. This study investigated the soil-water partitioning of PFAS under irrigation with four QNs (norfloxacin, ciprofloxacin, enrofloxacin, ofloxacin) using UHPLC-MS/MS and soil metagenomics. Results showed that QNs input, especially norfloxacin, significantly promoted the release of short-chain PFAS (e.g., PFBA) from soil to overlying water, while long-chain PFAS remained largely retained in soil. Metagenomic analysis revealed that archaeal and viral communities contributed most to PFAS release. Spearman correlations indicated ammonia-oxidizing archaea (Nitrososphaera) positively correlated with PFBA, whereas Bcep22virus negatively correlated with multiple PFAS. Differential gene expression and co-occurrence networks suggested QNs suppressed key functional genes in archaea and viruses (nitrogen metabolism, secretion systems, outer membrane proteins), reshaping interfacial partitioning and enhancing short-chain PFAS mobility, thereby increasing food security risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040401
Conventional zero-valent iron (ZVI) suffers from limited electron transfer due to its dense surface oxide layer. This study introduces a mechanochemical ball-milling strategy incorporating sodium chloride (NaCl) with ZVI to fabricate chloride-modified ZVI (Cl-ZVIbm). Using hexavalent chromium (Cr(VI)) as a model pollutant, Cl-ZVIbm exhibited a 76.5-fold enhancement in removal kinetics (0.0306 min−1 vs. 0.0004 min−1) compared to ball-milled ZVI (ZVIbm), achieving complete removal of 2 mg·L−1 Cr(VI) within 120 min. Spectroscopic characterization and density functional theory (DFT) calculations revealed dual regulation mechanisms: (1) Cl− substitution of surface hydroxyl groups alters coordination environments, enabling Cr(VI) adsorption via a bidentate binuclear configuration with adsorption energy reduced from –0.28 eV to –1.64 eV; (2) The strong electron-withdrawing effect of Cl− drives directional electron migration from the iron core to the surface, increasing surface Fe(II) content by 26.9% (67.5% vs. 53.2%) and facilitating direct electron transfer to reduce 99.5% of Cr(VI) into low-toxicity Cr(III). Notably, chloride leaching during reactions was only 0.0126 mmol·L−1, far below industrial wastewater discharge standards, confirming environmental compatibility. This work provides atomic-scale insights into chloride-mediated electronic modulation on ZVI surfaces, offering novel principles for interfacial engineering of environmental functional materials and a theoretical basis for heavy metal remediation technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3875-1
Photocatalytic hydrogen evolution reaction (HER) from pure water is a promising strategy to address critical challenges in energy sustainability and environmental remediation. However, HER over single-component photocatalysts is intrinsically limited by inefficient carrier separation and relatively poor photostability. Forming abundant interfaces between two components is an effective approach for solving these issues. Herein, a series of hierarchical core-shell heterojunction photocatalysts, designated as F@Z-X, was rationally constructed by in situ growing ZnIn2S4 (ZIS) nanosheets on a Ti-based metal-organic framework (FIR-125), demonstrating remarkable structural stability. Due to the abundant intimate contact interfaces and well-matched band structure, the F@Z-X series exhibit enhanced HER performance. Among them, the optimized heterojunction [email protected] shows a photocatalytic hydrogen evolution rate of 3789.45 μmol g−1 h−1, which is about 4.4 and 264.4 times higher than that of pristine ZIS (859.57 μmol g−1 h−1) and FIR-125 (15.32 μmol g−1 h−1), respectively. Moreover, the photocatalyst manifests excellent reusability and durability, maintaining its performance over five consecutive cycles and sixteen hours of continuous reaction. The outstanding performance of [email protected] may be ascribed to an optimal balance among three fundamental photocatalytic processes: sufficient light absorption, exceptional carrier separation, and appropriate surface reaction. This work offers valuable insights into the rational design and controllable synthesis of novel heterojunction photocatalysts for efficient hydrogen evolution.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60670-6
Direct conversion of syngas to higher alcohols (C2+ alcohols) is critical for coal-based resource utilization and energy security. Here, a series of Na-modified CoFe/Al2O3 catalysts were synthesized via incipient wetness impregnation and evaluated for syngas-to-alcohol reactions. Multiple characterizations (XRD, N2 adsorption-desorption, H2-TPR, XPS, DRIFTS, in situ Raman, Mössbauer spectroscopy) elucidated synergistic effects of Na and Fe promoters. Na facilitated formation of Co-Fe alloy sites during reaction, while Fe modified electronic state of Co and promoted transformation of lattice oxygen to adsorbed oxygen, increasing surface oxygen vacancies. Synergistic interaction between alloy and carbide sites enhanced CO insertion into olefin intermediates, improving C2+ alcohol selectivity. Under 260 °C and 2 MPa, Co1Fe1Na1 catalyst (n(Co):n(Fe):n(Na)=1:1:1) achieved total alcohol selectivity of 45%, with C2+ alcohols comprising 94.1% of total alcohols. This study provides insights into rational design of Co-based catalysts for efficient syngas conversion to C2+ alcohols.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4064-1
Bacterial infections and the accelerating rise of antimicrobial resistance (AMR) demand innovative antibacterial strategies beyond conventional antibiotics. Copper single-atom catalysts (Cu-SACs), featuring atomically dispersed active sites and tunable electronic structures, offer potent multimodal catalytic antibacterial functions. This review summarizes recent advances in the design, mechanisms and applications of Cu-SACs in antimicrobial technologies. We first outline four major synthesis routes: thermal activation, solvent-mediated strategies, energy-intensive methods and template-etching approaches, enabling high loading, stable anchoring and scalable, environmentally compatible production. We then dissect the multimodal antibacterial mechanisms of Cu-SACs: functioning as nanozymes to catalyze reactive oxygen species (ROS) generation; acting as photosensitizers to enable photocatalytic and photothermal bactericidal activity; and integrating these pathways with gas therapy, controlled ion release and immune modulation to construct multidimensional antimicrobial networks capable of eradicating drug-resistant bacteria and biofilms. We further discuss the substantial potential of Cu-SACs across three application domains: chemical-free, high-efficiency disinfection and real-time monitoring in water purification; durable self-disinfecting performance in antimicrobial textiles; and precision infection management in biomedical settings through integrated “bactericidal-anti-inflammatory-tissue-repair” therapeutic frameworks for both superficial and deep-tissue infections. Finally, we examine the challenges and future directions for the clinical translation and precise antimicrobial deployment of Cu-SACs, providing a conceptual foundation and practical guidance for advancing atomically engineered antibacterial materials from laboratory research to industrial applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3522-7
Scalable printing of stretchable conjugated polymer films is essential for low-cost, large-area wearable electronics, yet achieving optimal film morphology that simultaneously enhances energy dissipation and charge transport remains a critical challenge. This study demonstrates large-area stretchable conjugated polymer films with low crystallinity but strong chain alignment, fabricated by simultaneously regulating fluid field and solidification dynamics during bar-coating. The strong fluid field aligns polymer chains in the coating direction and promotes solution aggregation in the initial wet layer, while sequential rapid solidification restricts crystallization and facilitates aggregate alignment, forming highly-aligned nanofiber networks within the elastomer phase. These elastomer-constrained nanofiber networks maintain connectivity under strain, providing efficient charge transport channels. The resulting films exhibit high charge mobilities of 6.11 and 2.98 cm2 V−1 s−1 at 0% and 100% strains, respectively, among the highest reported for stretchable conjugated polymer films. The films also achieve a high X-ray sensitivity of 1757.2 μC Gyair−1 cm−2 and an ultralow detection limit of 72.5 nGyair s−1, with maintained imaging capability before and after stretching. This work establishes a robust morphology control strategy for high-performance, large-area stretchable conjugated polymer films, advancing their practical application in wearable electronics.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3481-5
Underwater hot spring monitoring demands sensors that withstand temperatures exceeding 200 °C, rapid thermal fluctuations, and corrosive seawater while maintaining flexibility for deployment on irregular rock surfaces. This study presents a flexible high-temperature sensor utilizing conductive indium tin oxide (ITO) and sensitive In2O3 as sensing layers, deposited on polyimide and encapsulated with PET. Simulation and experimental results demonstrate a sensitivity of 179.6 μV/°C during rapid cooling from various temperatures to 25 °C without applied pressure, with a maximum output variation of 5.76% under 20 MPa. The serpentine electrode structure reduces internal stress, enabling stable output after 10,000 bending cycles. The sensor operates stably from 30 to 300 °C in air, water, seawater, and silicone oil, achieving an output voltage of 41.91 mV and sensitivity of 175.21 μV/°C near 300 °C in silicone oil. In seawater, continuous operation for 20 h and immersion for 48 h resulted in an average output variation of only 1.94%, confirming corrosion resistance and long-term stability. These metrics address the limitations of rigid thermocouples and low-temperature flexible sensors, offering a viable solution for in situ temperature monitoring in extreme underwater thermal environments.