SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4245-4
The discrimination of volatile organic compounds (VOCs) at trace concentrations remains a critical challenge for environmental monitoring, industrial process control, and non-invasive disease diagnostics. Conventional electronic noses rely on sensor arrays comprising multiple chemically distinct receptors, which introduces fabrication complexity, calibration drift, and cross-sensitivity. Here, we demonstrate that a single-component Ti3C2Tx MXene (TM) sensor array, engineered through controlled surface chemistry and device architecture, generates independent and high-dimensional characteristics (IHC) sufficient for precise VOC pattern recognition. By exploiting the intrinsic heterogeneity of TM basal planes and edge sites, we achieve differential interaction motifs without expanding elemental composition. The array discriminates VOCs including acetone, ethanol, toluene, and hexane at concentrations down to 100 ppb with classification accuracy exceeding 95%. Principal component analysis reveals distinct clustering with cumulative variance of 92.3% captured by the first three principal components. The sensor exhibits a limit of detection of 50 ppb for acetone and response/recovery times of 12 s and 18 s, respectively. Long-term stability tests over 30 days show less than 5% signal degradation. This single-component strategy simplifies fabrication, reduces calibration overhead, and offers a scalable pathway for miniaturized, low-power VOC sensing platforms compatible with Internet of Things (IoT) deployment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4378-6
Electrical stimulation (ES) is a powerful strategy to mimic endogenous bioelectricity and accelerate complex tissue regeneration, such as chronic wound healing. However, aligning external stimulation with native bioelectrical and biochemical signals for rapid and scarless tissue regeneration remains challenging. Here, we report a wireless bioelectronic dressing (E-dressing) that establishes stable bioelectronic interfaces and precisely modulates cellular physiological activities. Bioactive allylamine-functionalized gold clusterzymes (AM-AuNCs) with intrinsic superoxide dismutase-like activity were designed as functional modifiers to co-polymerize with acrylic acid (AA), forming conductive p(AA-AuNCs) hydrogels. AM-AuNCs impart the hydrogel with superior antioxidant activity, robust interfacial adhesion, and high conductivity, enabling rapid hemostasis, efficient electrical stimulation transmission, and precise fibroblast regulation. Combined with 1.00 V of electrical stimulation, the p(AA-AuNCs) hydrogel significantly promotes fibroblast proliferation, migration, and alignment by upregulating TGF-β, FGF-2, and EGF. Integrated with a biocompatible, flexible zinc-ion battery delivering sustained and tunable electrical signals for over 7 days, the E-dressing precisely guides collagen remodeling, inhibits myofibroblast activation, and maintains Col I/Col III balance, leading to a 5-fold acceleration of wound closure and a 65.5% reduction in scar formation. This multifunctional E-dressing represents a promising bioelectronic device for precise cellular regulation and multimodal regenerative therapy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3779-1
Comprehensive mechanical properties, including hardness (H), elastic modulus (E), fracture toughness (KC), and wear resistance, are essential for oxide ceramics used in demanding environments. This work employs nanoindentation to evaluate these properties for RE3TaO7 (RE=La, Sm, Eu, Gd, Dy, Lu) and identifies the optimal calculation method for KC in brittle oxide ceramics. The ratio of indentation crack length to half-diagonal (l/α) is a key parameter: Eq. (3) is suitable when l/α < 1, while Eq. (4) applies when l/α > 1. The indentation energy method is invalid for brittle ceramics due to crack formation at high loads. RE3TaO7 oxides exhibit H of 5.8–14.9 GPa, E of 127.5–247.8 GPa, and KC of 1.0–2.0 MPa·m1/2, surpassing RE2Zr2O7 (KC 1.0–1.5 MPa·m1/2). Wear resistance, indicated by MDP, ranges from 0.55 to 0.67, outperforming RE2Zr2O7. The superior fracture toughness is attributed to weberite structure with crack deflection and tortuous propagation, contrasted with pyrochlore's straight cracks. These findings provide accurate nanoindentation-based methods for assessing mechanical properties of brittle oxide ceramics, facilitating material discovery and optimization for thermal barrier coatings and other high-temperature applications.
Environmental Chemistry•2026•DOI: 10.0000/202605-2
Surface sediment samples were collected from 28 stations in the intertidal zones of Xiangshan Harbor, Sanmen Bay, and the southern coast of Hangzhou Bay, major fishery waters in Ningbo, to assess heavy metal pollution and ecological risk. Concentrations of Cu, Pb, Zn, Cd, Cr, Hg, and As were determined. Results showed that Cu and Cr were the primary超标 factors, with mean concentrations exceeding the Class I standard (GB 18668-2002) by factors of 1.03 and 1.1, respectively, in Xiangshan Harbor; in Sanmen Bay, Cr exceeded by 1.1 times, while Cu did not. In Hangzhou Bay, Cu and Cr were elevated but below the standard. Coefficients of variation (CV) for five metals in Hangzhou Bay exceeded 30%, indicating strong external influence. In Xiangshan Harbor, As showed strong variation, and in Sanmen Bay, Hg showed strong variation. The potential ecological risk indices (RI) were 38.5, 36.7, and 31.1 for Xiangshan Harbor, Sanmen Bay, and Hangzhou Bay, respectively, all indicating low ecological risk. Spatial distribution in Hangzhou Bay revealed a decreasing gradient from a chemical industrial park, suggesting industrial discharge as a primary source. The study provides baseline data for environmental management and recommends source control and bioremediation in high-risk areas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3936-8
The precise separation of enantiomers is essential for developing effective chiral drugs, yet conventional membranes are constrained by the ubiquitous selectivity-permeability trade-off and low flux, limiting scalable production of single-enantiomer drugs. Herein, we present a cascade reaction strategy integrating Sonogashira-Hagihara coupling and Friedel-Crafts alkylation to fabricate porous conjugated microporous polymer membranes (CCMP-M P1–4/SiO2). This approach enhances specific surface area by 400-fold compared to the product from the Sonogashira-Hagihara coupling reaction alone, creating interconnected porous networks that facilitate mass transport. This hypothesis was confirmed by pore-size gradient experiments, which revealed a critical size-matching effect: matched molecular dimensions enable high-speed mass transfer with 97% enantioselectivity, while mismatch reduces selectivity to 9%, as visualized in a separation performance matrix across four chiral molecules. Precise chiral recognition is programmable via absolute configuration control of chiral monomers, with the mechanism of “preferential adsorption–interfacial enrichment–promoted diffusion” confirmed by static adsorption and density functional theory calculations. This strategy achieves breakthrough performance: Naproxen flux reaches 37 mmol m−2 h−1, surpassing literature values, and enables membrane-based separation of Raceanisodamine (89% selectivity of 6S, 2′S and 6R, 2′R-isomer after cascade enrichment) for the first time. This work provides a new paradigm for designing high-performance chiral separation membranes, facilitating scalable and sustainable production of single-enantiomer drugs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3763-9
Developing near-infrared (NIR) organic phototheranostic agents with aggregation-induced emission (AIE) is crucial for precise diagnosis and synchronous cancer treatment by regulating excited-state energy dissipation. However, the distorted molecular configuration of AIE systems poses a challenge to achieving both high fluorescence quantum yield (QY) and large molar extinction coefficient (ε). Herein, a series of donor-acceptor-donor (D-A-D) AIE small molecules with bright NIR emission and high photothermal conversion efficiency (PCE) were developed through an acceptor planarization and donor rotation molecular engineering strategy. Upon encapsulation into water-dispersible nanoparticles (NPs), SVD NPs exhibited strong molar absorptivity (ε = 3.92 × 10^4 M^-1 cm^-1), high QY of 4%, and improved photothermal performance (PCE × ε = 2.2 × 10^4), enabling effective NIR fluorescence imaging-guided phototherapy for successful ablation of subcutaneous tumors. This study offers valuable insights into the simultaneous enhancement of bright NIR luminescence and exceptional photothermal performance in AIE phototheranostic agents, propelling advancements in tumor diagnosis and treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3864-4
Organic room temperature phosphorescence (RTP) materials, particularly those emitting in the near-infrared (NIR) region, hold great promise for bioimaging due to their deep-tissue penetration and minimal autofluorescence interference. However, achieving efficient NIR RTP with long lifetimes remains challenging due to inefficient triplet exciton utilization. Herein, we propose a dark triplet state activation strategy to achieve efficient NIR RTP by leveraging host–guest energy transfer. Using benzophenone derivatives (BP, OBP, MBP, PBP) as rigid host matrices with high intersystem crossing (ISC) efficiency and an NIR fluorophore (MPTCF) as the guest, we achieve efficient Dexter-type triplet-triplet energy transfer (TTET) that converts non-emissive host triplets into guest-centered NIR phosphorescence. Systematic optimization of the host–guest system has shown that PBP/MPTCF exhibits exceptional performance, including long phosphorescence centered at 705 nm, an ultralong phosphorescence lifetime (210.3 ms), and high ISC efficiency (44.4%). When fabricated into nanoparticles (NPs), PBP/MPTCF exhibits superior performance, featuring prolonged phosphorescence signals (>120 s), deep tissue penetration capability (>2 mm), and excellent biocompatibility (cell viability >95% at 300 μM). In addition, this system enables high-contrast subcutaneous imaging with excellent dispersibility and stable in vivo imaging capability. More importantly, PBP/MPTCF NPs demonstrate precise lymph node mapping through time-gated phosphorescence imaging and efficient tumor visualization within 4 h post-injection with a high tumor-to-liver ratio of 2.8. The successful activation of dark triplet states through this host–guest approach provides a general design principle for developing high-performance NIR RTP materials, while the demonstrated biomedical applications highlight their significant potential for advanced bioimaging and precision diagnostics.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608007
The Minjiang River Basin, subjected to combined pollution from domestic, agricultural, and industrial sources, has become a typical sensitive area for studying the environmental behavior of emerging contaminants such as antibiotics. This study conducted a cross-year comparative analysis of the composition and concentrations of antibiotics in water samples from nine sampling sites during the dry season in November 2022 and 2024. The findings revealed: 1) After the implementation of the "National Action Plan for Reducing Antimicrobial Use in Livestock", the detection concentrations of tetracycline antibiotics (TCs) decreased (e.g., doxycycline concentrations dropped from 7.75 ng/L to undetectable levels), and the mixed risk quotient (MRQ) across the entire basin transitioned from medium to low risk. However, lincomycin (up to 4.6 ng/L), clarithromycin (1.3 ng/L), and florfenicol (0.6 ng/L) have emerged, indicating an increasing hidden ecological risk from substitution. 2) High-concentration antibiotic zones transferred from urban residential areas in 2022 to intensive aquaculture zones and upstream reservoir areas in 2024. The reduction in dry-season water flow intensified pollutant accumulation, synergistically enhancing the effects of tidal drag. Additionally, the conversion of agricultural land to aquaculture ponds led to increased use of alternative drugs (e.g., sulfamethazine), while policy interventions mitigated the exacerbation of urban antibiotic pollution by construction land. This study elucidates the migration patterns of antibiotic pollution under the synergistic effects of policy regulation and natural processes, emphasizing the need to address hidden risks of substitute drugs and the driving role of land-use changes, providing scientific basis for watershed-scale risk assessment and precise management of emerging pollutants.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608028
Ship loading operations emit multi-component volatile organic compounds (VOCs) with complex composition, including methanol, dichloromethane, trichloroethylene, p-xylene, acrylonitrile, benzene, and acetonitrile. Under high-humidity marine conditions, treatment is challenging. This study systematically screened three molecular sieves with distinct pore sizes—ZSM-5, β-type, and HY—for selective adsorption of these seven VOCs at moisture contents of 0%, 2.5%, and 5%. Competitive adsorption in acrylonitrile/p-xylene mixtures was examined on ZSM-5-all-silica and HY-100. Results showed: (1) saturated adsorption capacity decreased with increasing moisture content, confirming water-VOC competition; higher Si/Al ratios enhanced hydrophobicity, with all-silica ZSM-5 exhibiting superior water resistance. (2) Selective adsorption followed pore size matching: ZSM-5 (0.54–0.56 nm) suited C1–C3 small molecules (10–50 mg/g); β-type (1.1–1.2 nm) showed best universality for C3–C6; HY (2.16–2.76 nm) favored C8 molecules like p-xylene (100–120 mg/g). (3) Optimizing molecular sieve proportion and layered arrangement balanced adsorption capacities across components, significantly prolonging breakthrough time. The optimal configuration placed ZSM-5 in the upper layer and HY in the lower layer. Molecular sieves also exhibited good thermal stability and regenerability. This study provides technical support for efficient treatment of multi-component VOCs from ship loading operations.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4018-6
The pursuit of advanced wear-resistant materials for cryogenic applications is often hindered by a fundamental trade-off between enhancing strength and damage tolerance. CoCrNi-based medium-entropy alloys (MEAs), while excellent in cryogenic toughness, suffer from this very limitation. Although second-phase reinforcement boosts strength, the strain incompatibility between phases inevitably triggers cracking, which is severely exacerbated at low temperatures. This work introduces a novel microstructural design strategy based on regulated partial recrystallization to overcome this long-standing challenge. By tailoring the thermomechanical processing of a (CoCrNi)90Mo10 MEA, we engineered a unique architecture where a fully recrystallized FCC phase is homogeneously embedded within a continuous skeleton of a hard, non-recrystallized σ phase. The alloy with this optimized microstructure achieved a remarkably low wear rate at 113 K that is less than half of its as-cast and fully recrystallized counterparts. The experimental and modeling results indicate the underlying synergy: the σ skeleton provides robust structural support and distributes stress deeply, while the recrystallized FCC phase, with its high density of grain boundaries and annealing twins, acts as a compliant strain-accommodating medium, effectively suppressing interfacial cracking. This combined 'skeleton effect' and 'recrystallization effect' not only delivers exceptional cryogenic wear resistance but also offers a practical strategy for designing high-performance, crack-resistant dual-phase composites for extreme environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4144-y
Developing efficient strategies for electrically manipulating two-dimensional magnetism at room temperature is a key challenge in contemporary spintronics. In this study, we demonstrate giant electromechanical control over the magnetism of the room-temperature van der Waals ferromagnet Fe3GaTe2 by integrating it with the ferroelectric α-In2Se3. Modest gate voltages lead to an almost complete suppression of the coercive field by 96.5%, corresponding to a remarkable peak modulation sensitivity of ~8.1 mT V−1, which stands out among existing van der Waals magnetoelectric systems. Importantly, this substantial magnetoelectric response is predominantly unaffected by voltage polarity, as both positive and negative gate voltages induce similar magnetic modulation effects. To elucidate the underlying mechanism, we tracked the voltage-induced Raman spectral changes, revealing a peak shift of 1.7 cm−1 that accurately represents an effective in-plane tensile strain of ~1.42% under an equivalent bias, demonstrating polarity independence as well. The synchronized magnetic response and strain variation unequivocally indicate that the induced tensile strain serves as the fundamental physical driver behind the magnetic modulation. Additionally, density functional theory calculations corroborate that the reduction in magnetic anisotropy induced by tensile strain results in a decrease in the coercive field. Our work establishes a novel and efficient approach for achieving voltage control of magnetism at room temperature in van der Waals multiferroic heterostructures, highlighting their significant potential for applications in ultra-low-power magnetic logic and sensing technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4066-x
Direct seawater electrolysis offers a sustainable route to green hydrogen, yet is hindered by the competing chlorine evolution reaction and severe catalyst corrosion. Layered double hydroxides (LDHs), with tunable host layers and exchangeable interlayer galleries, are promising for the oxygen evolution reaction (OER) in seawater, but their intrinsic activity and chloride tolerance need enhancement. Anion intercalation engineering has emerged as a powerful strategy to address these challenges. By inserting functional anions—from simple inorganic ions and polyoxometalates to organic molecules—into LDH interlayers, it is possible to expand interlayer spacing for improved mass transport, modulate the electronic structure of metal centers to boost intrinsic OER activity, and create a negatively charged interfacial microenvironment that selectively enriches OH−. This review comprehensively examines design principles, mechanistic insights, and catalytic performance of various anion-intercalated LDHs for seawater splitting. It highlights representative breakthroughs in material design, discusses integration strategies in practical electrolyzer devices, and evaluates long-term stability under industrial operating conditions. Finally, it outlines key challenges and future directions for rational design and scalable deployment of high-performance, durable LDH-based catalysts for sustainable hydrogen production from seawater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4173-x
Ferroelectric memory, with its promise of low power consumption, high writing speed and exceptional endurance, requires the scaling of ferroelectric films to ultrathin dimensions—often just a few atomic layers thick. However, such extreme thinning risks destabilizing or even erasing electric polarization, mainly due to the detrimental depolarization field. Remarkably, certain ferroelectrics exhibit an intrinsic immunity to this effect, as predicted theoretically and confirmed experimentally. Examples include improper ferroelectrics, hyper ferroelectrics, engineered heterostructures, and low-dimensional van der Waals ferroelectrics. This review systematically examines these unique materials, unravelling the fundamental physics behind their polarization robustness and the mechanisms enabling them to resist the depolarization field. By bridging theory with experimental advances, we aim to inspire the design of next-generation ferroelectrics capable of overcoming critical challenges encountered in practical ferroelectric memory devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3476-4
Ammonia synthesis remains dominated by the Haber-Bosch process, which operates at 400–500 °C and 150–300 bar, consumes 1–2% of global energy, and emits ~1.4% of global CO2. Ru-based catalysts supported on carbon and promoted with basic oxides (Ba, Cs, La) exhibit high activity under mild conditions, but conventional designs suffer from a trade-off: BaO domains block Ru active sites while attempting to donate electrons. Lee et al. (Nat Catal, 2025, 8: 248–256) resolved this by using conductive carbon to bridge isolated Ru and BaO domains, enabling long-range H+/e− pair migration. Screening eleven carbon supports, they identified N-doped multi-walled carbon nanotubes (10–20 nm diameter, N-MWNT-1) with the lowest work function as optimal. At a Ba/Ru molar ratio of 0.75, the catalyst achieved an NH3 production rate 7.4 times higher than conventional BaO-promoted Ru catalysts under 573 K and 1.0 MPa, using high-purity H2 and N2 (99.999%, O2 <0.4 ppm, H2O <0.7 ppm). This design decouples proton and electron storage, preventing BaO-induced blockage of Ru surfaces and enabling superior activity and stability. The Ba-Ru/carbon catalyst offers a transformative pathway for reducing energy consumption and integrating with electrolytic hydrogen production in industrial ammonia synthesis.