SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3707-8
Wound infection is a major cause of death during the wound healing process. Improperly dressed wounds can lead to secondary injury, prolonging healing time and increasing infection risk. Here, we propose an antibacterial slippery dressing through molecular engineering of copper ions. The oil layer forms a barrier to reduce clot adhesion to the wound site and prevent environmental contamination. Single-cell level detection indicates that secreted copper ions induce bacterial death not only by disrupting membrane integrity but also by relying on the production of reactive oxygen species. Further membrane depolarization and adenosine triphosphate production blockage result in the aggregation of important proteins in various biological processes, such as metabolic homeostasis, ultimately leading to bacterial death. The animal model confirms that our dressing accelerates wound healing by promoting the growth of granulation tissue and collagen deposition. Our dressing demonstrates significant clinical implications for the design of next-generation therapeutic applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0028
Pyrolysis is a key route for the graded conversion of low-rank coal, yet the volatiles are rich in oxygenates and heavy components, limiting direct utilization. This study proposes a tandem catalytic system combining metal oxides and ZSM-5 zeolite to efficiently convert lignite pyrolysis volatiles into light aromatics (benzene, toluene, ethylbenzene, xylene, naphthalene, methylnaphthalene). The upper-layer metal oxide pre-cracks large molecules and removes oxygenates, reducing carbon deposition on the zeolite and extending catalyst life. Among metal oxides tested, strongly basic MgO exhibited superior cracking and deoxygenation performance. Compared to ZSM-5 alone, the MgO/ZSM-5 tandem system increased total light aromatics yield by approximately 20% to 21.5 mg/g, while maintaining liquid product proportion at 21.4%. The incorporation of MgO also significantly reduced coke deposition on ZSM-5, preserving its catalytic activity and potentially prolonging its operational lifespan. These findings provide a theoretical basis for upgrading low-rank coal pyrolysis volatiles to valuable light aromatics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030602
In the context of accelerated urbanization, regional air composite pollution in medium and large urban agglomerations is primarily characterized by PM2.5-O3 compound pollution. To elucidate the meteorological causes of PM2.5-O3 compound pollution in the Yangtze River Delta (YRD) region over the recent seven years (2017–2023), this study analyzed monitoring data from typical cities (Nanjing, Shanghai, Hangzhou, and Hefei) using Pearson and partial correlation coefficients. Results indicate: (1) PM2.5 pollution exhibited a significant downward trend across all four cities, with notable improvement during the COVID-19 pandemic in 2020, underscoring the effectiveness of air pollution control measures. Conversely, O3 pollution remained elevated or increased in some cities, indicating persistent challenges in O3 control. (2) During O3 pollution episodes, PM2.5 and O3 concentrations were positively correlated, whereas during PM2.5 pollution episodes, they were negatively correlated. (3) Compound pollution days were predominantly observed from February to October, with the highest frequency (20 days) occurring from April to June. (4) The significant reduction in PM2.5 weakened the aerosol 'umbrella effect', enhancing surface radiation and promoting near-surface O3 formation. Concurrently, changes in the NOx/VOCs ratio weakened O3 titration, and climate warming accelerated O3 precursor generation and potentially altered boundary layer structure, collectively contributing to O3 accumulation in the cold season and an increasing frequency of compound pollution during that period. (5) The formation mechanisms of PM2.5 and O3 are driven by distinct meteorological conditions, with low overall concentration correlation; however, under compound meteorological conditions such as high temperature, stagnant air, and weak diffusion, both pollutants tend to rise synchronously, indicating that compound pollution events are typically driven by multiple adverse meteorological factors. This study demonstrates that from 2017 to 2023, PM2.5 pollution significantly decreased while O3 pollution showed an increasing trend. Compound pollution was concentrated in April–June and influenced by high temperature, stagnant air, and weak diffusion. With effective PM2.5 control, enhanced surface radiation and changes in O3 precursors led to O3 accumulation in the cold season, increasing compound pollution frequency. Overall, compound pollution is driven by multiple meteorological factors, posing complex challenges for control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4010-4
Liver fibrosis, a critical pathological consequence of chronic liver injury, remains a therapeutic challenge due to its complex mechanisms and limited effectiveness of conventional treatments. Recent advancements in two-dimensional (2D) nanomaterials, such as graphene derivatives, transition metal dichalcogenides (TMDs), black phosphorus nanosheets (BPNSs), MXenes, and layered double hydroxides (LDHs), have created novel opportunities for antifibrotic therapy. These materials exhibit exceptional physicochemical properties, including ultrahigh surface area, tunable surface chemistry, biocompatibility, and photothermal/electrochemical functionalities, enabling multifaceted interventions in fibrosis progression. The core therapeutic strategies mainly involve modulating hepatic stellate cells (HSCs) activation, inhibiting excessive extracellular matrix (ECM) deposition, and alleviating oxidative stress and inflammatory responses. However, 2D nanomaterials still face great challenges, such as long-term biosafety, precise functionalization for tissue-specific targeting, and scalable synthetic methods. This review systematically summarizes the recent breakthroughs in anti-fibrosis strategies based on 2D nanomaterials, elucidates their potential mechanisms of action, and explores the prospects for clinical translation of these nanoplatforms. Serving as a nexus between materials science and hepatology, 2D nanomaterials offer revolutionary prospects for precision medicine applications in hepatic fibrosis management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4033-1
Photodetectors are critical components in modern optoelectronic systems, underpinning applications in optical communication, low-altitude economy, environmental monitoring, and national defense. Layered two-dimensional (2D) materials such as MoS2, WS2, black phosphorus (BP), and ReS2 have attracted extensive attention due to their remarkable electronic and optical properties, including facile mechanical exfoliation and tunable characteristics via thickness engineering. The absence of dangling bonds enables the construction of van der Waals (vdW) heterostructures free from lattice-matching constraints, promoting efficient charge transport, enhanced light absorption, and suppressed dark current. Among layered materials, semimetals such as graphene, PdTe2, MoTe2, and TaIrTe4 exhibit narrow or zero bandgaps, enabling ultrabroadband spectral responses from ultraviolet (UV) to terahertz (THz). ZrTe3, a layered gapless semimetal, demonstrates pronounced carrier transport features, including robust excitons and ultrafast carrier relaxation times, making it an ideal candidate for photodetection. However, pure ZrTe3-based photodetectors suffer from substantial dark current due to the absence of an energy bandgap, degrading signal-to-noise ratio and specific detectivity (D*). This work reports a high-performance broadband photodetector based on a ZrTe3/CuInP2Se6 heterostructure. By exploiting an asymmetric contact configuration that introduces a Schottky barrier, the device effectively suppresses dark current while enhancing photoresponse. The photodetector exhibits broad spectral sensitivity from UV to near-infrared (355–1177 nm), microsecond-level response speed, and high responsivity and specific detectivity. Beyond conventional photodetection, an optoelectronic information encryption-decryption application is demonstrated, where modulated light and bias voltage serve as dual input channels to encode and decode ASCII signals. This study resolves the challenge of high dark current in semimetal-based photodetectors and introduces a multifunctional platform for secure optoelectronic communication, highlighting the potential of ZrTe3 for next-generation photonic and quantum information technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4162-0
The urea oxidation reaction (UOR) offers a low-energy pathway for hydrogen production via water electrolysis, but Ni-based catalysts suffer from Ni self-oxidation reaction (NSOR) that wastes energy and poisons active sites via strong CO2 adsorption. Here, we design MoN/Ni heterostructures to optimize the electronic structure of Ni sites, suppressing NSOR. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy confirm the formation of electron-rich Mo and electron-deficient Ni active pairs. In-situ spectroscopy, electrochemical tests, and density functional theory calculations reveal that electron-rich Mo sites enhance urea adsorption, while electron-deficient Ni sites prevent NSOR, facilitating urea activation, intermediate conversion, and CO2 desorption. The synergistic effect yields a current density of 100 mA cm−2 at only 1.39 V vs. RHE in 1 M KOH + 0.33 M urea, outperforming many NiOOH-based catalysts. This work introduces a novel high-performance catalyst with electron-rich/electron-deficient active pairs for efficient UOR.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4216-7
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are promising for lightweight and mechanically pliable photovoltaics, yet their performance is limited by severe non-radiative recombination and residual stress. Here, we report a sealed constant temperature (SCT) annealing strategy that simultaneously optimizes the CZTSSe/CdS heterojunction and alleviates stress. Under uniform mild thermal conditions (85°C, 5 h), SCT annealing promotes gradient diffusion of Cd2+ into the absorber, partially substituting Zn2+, which optimizes band alignment, passivates interface defects, and suppresses near-interface CuZn defects. This reduces open-circuit voltage loss and improves fill factor. The flexible device achieves a power conversion efficiency of 13.07%, a significant improvement over the reference (12.1%). The SCT strategy also enhances mechanical flexibility by reducing residual stress. Our findings provide a controllable route to advance both efficiency and flexibility of flexible CZTSSe solar cells.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4137-3
Metal halide perovskite solar cells (PSCs) are promising as high-efficiency, low-cost photovoltaics; however, their efficiency and stability are often compromised by high defect densities at grain boundaries and interfaces. To mitigate these issues, long-chain ammonium salts are introduced to the surface of three-dimensional (3D) perovskites to construct 2D/3D heterostructures, enabling effective chemical and field-effect passivation. Previous studies have mainly integrated 2D/3D heterostructures into the perovskite bulk or at its upper surface to improve device performance. Nevertheless, 2D/3D perovskite engineering at the buried interface remains challenging, because the pre-deposited 2D perovskite layer would be dissolved during subsequent 3D perovskite processing, while 2D perovskites introduced as additives are also difficult to selectively assemble at the buried interface. Moreover, achieving controllable 2D/3D perovskite heterojunction at the buried interface with well-defined dimensionality, orientation, and energy-level alignment has become a key challenge, and related studies remain scarce. Previous ligand-based methods for constructing buried 2D/3D heterojunctions suffer from weak interfacial interactions, leading to undesirable ligand diffusion into the 3D perovskite bulk and non-uniform distribution at the interface. Recently, Jen et al. constructed localized 2D/3D perovskite heterojunctions at the buried interface by leveraging the Lewis acid-base interaction between the –NH3+ group of the oleylammonium iodide (OAmI) ligand and a sulfur-functionalized self-assembled monolayer (SAM). The rationally designed SAMs featuring Lewis-basic sulfur atoms (CbzBT-B) are able to anchor the ligands and thereby facilitate the growth of localized 2D perovskite phases. Besides, De Wolf et al. added 4-hydroxybenzylamine (HBzA) into the 2PACz solution, where an acid-base reaction between the HBzA amine and the phosphonic acid group (–PO(OH)2) of 2PACz forms a robust ionic bond. This interaction improves HBzA anchoring on the ITO surface and facilitates the formation of a 2D/3D heterojunction at the buried perovskite interface. However, the intrinsic packing density and uniformity of SAMs limit ligand anchoring and the subsequent growth of 2D perovskites. Therefore, achieving a well-defined buried 2D/3D heterojunction requires tightly confining ligands to the charge-selective contact, particularly for scalable PSCs. In the recent work by Wang et al., an in situ solid-state ligand-exchange strategy is proposed to form a 2D perovskite layer exclusively at the SnO2/perovskite interface, without introducing undesired 2D-phase contamination into the 3D perovskite bulk. Owing to the binding affinity between the –SH and SnO2, thioglycolic acid (TGA) is first introduced during the synthesis of SnO2 nanoparticles to obtain TGA-capped SnO2 nanoparticles, thereby enhancing the adhesion of alkylamine molecules on the SnO2 surface. Subsequently, various alkylamines were anchored onto the SnO2-TGA nanoparticles via an acid-base reaction between the –NH2 and –COOH groups. Therefore, OAm is immobilized on the SnO2 surface through ionic bonding with TGA. During the subsequent thermal annealing of perovskite, ion exchange occurs between OAm-TGA and FAI, leading to the formation of 2D/3D perovskite heterojunctions. In situ photoluminescence (PL) spectroscopy is employed to elucidate the crystallization kinetics of perovskite films on the SnO2-TGA-OAm substrate. At the initial stage of ethyl acetate antisolvent dripping, both the control and target samples exhibit a rapid increase in PL intensity. In the subsequent period, however, the target sample undergoes a prolonged stage of continuous PL increase, whereas the control shows persistent PL decay, indicating that the SnO2-TGA-OAm substrate effectively modulates the crystallization process, promoting the formation of high-quality perovskite films with reduced defects.