SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4298-x
Conventional electrochemical artificial muscles rely on liquid electrolytes, which suffer from poor encapsulation processability, high leakage risks, and inadequate biocompatibility, limiting their application in bionic medicine, wearable exoskeletons, and humanoid robots. To address these bottlenecks, we fabricated a polyvinyl alcohol-polyacrylic acid (PVA-PAA) double-network hydrogel electrolyte and integrated it with twisted carbon nanotube (CNT) yarns via ultraviolet curing, constructing an all-solid-state artificial muscle unit. The unit maintained structural integrity and actuation performance after mechanical deformation treatments such as weaving and knotting. Experimentally, it achieved a maximum contractile stroke of 16% at −1 to 1.8 V and generated an isometric force of approximately 500 mN at −1 to 2 V. The solid-state artificial muscles exhibited excellent mechanical properties, compact size, and high flexibility, offering new opportunities for applications in bionic medical devices and intelligent robots.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3696-3
The development of substitutable meniscus implants that can effectively protect articular cartilage remains a great challenge. Herein, a polyurethane with chemical crosslinking and sulfobetaine extenders containing hydrophobic chains (PU-CL-hSB) is developed, which could improve comprehensive properties and long-term stability simultaneously. By regulating the mole ratio of functional groups, PU-CL-hSB with appropriate mechanical properties, excellent tribological properties, and good fatigue resistance is used to prepare substitutable meniscus implant by hot-pressing. Due to the synergistic effect of functional groups, PU-CL-hSB meniscus implant presents comparable or even superior properties to native meniscus. It withstands a maximum force of 26.08 N versus 25.14 N for native meniscus, an energy dissipation from 45.93 to 39.17 N mm compared to 28.83 to 19.11 N mm for native meniscus over 300 cycles, and a friction coefficient from 0.08 to 0.19 compared to 0.11 to 0.26 for native meniscus. This PU-CL-hSB meniscus implant is further implanted into live rabbit knee joints for 8 and 25 weeks by a new approach, and in vivo data indicate that PU-CL-hSB meniscus implant not only protects articular cartilage from severe damage without eliciting inflammatory responses, but also can maintain normal physiological activities in the native state. Our findings present a substitutable meniscus implant that could be applied in vivo and propose evaluation methodologies for meniscus implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3761-7
Ruthenium-based materials, including metallic Ru and RuO2, are promising electrocatalysts for electrochemical water splitting (EWS) due to their high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, their practical application is hindered by the relatively strong adsorption of reaction intermediates on Ru surfaces and the oxidative dissolution of RuO2 under operating conditions. This review provides a comprehensive overview of recent progress and challenges in Ru-based electrocatalysts for EWS. We first summarize the fundamentals of EWS, including reaction mechanisms and activity descriptors. Then, we detail typical synthesis methods such as hydrothermal/solvothermal syntheses, organic ligand-assisted syntheses, pyrolysis, acid etching, cation exchange, and molten salt-assisted syntheses. Subsequently, we focus on enhancement strategies, including alloying, doping, structure design, interface engineering, single-atom catalyst design, high-entropy alloy design, phase engineering, and defect engineering, with typical examples illustrating structure-property correlations. Finally, we address remaining challenges and future prospects for the development of efficient and durable Ru-based electrocatalysts for sustainable hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3727-0
Lead halide perovskites are promising scintillators for X-ray imaging due to high X-ray absorption efficiency, excellent luminescence, and facile synthesis. However, their ionic nature challenges simultaneous high photoluminescence efficiency and environmental robustness. This work introduces a multilevel encapsulation strategy: CsPbBr3 quantum dots (QDs) are sequentially coated with Cs4PbBr6, SiO2, and polydimethylsiloxane (PDMS). Cs4PbBr6 passivates surface defects, while SiO2 and PDMS provide barriers against moisture, heat, and radiation. The resulting CsPbBr3@Cs4PbBr6/SiO2/PDMS flexible films exhibit a photoluminescence quantum yield (PLQY) of 85%, outstanding mechanical flexibility, and durability under stretching, bending, and compressing. Films retain emission stability under elevated temperatures, prolonged X-ray irradiation, and extended water immersion. X-ray imaging demonstrates spatial resolution of 12 lp/mm, enabling distortion-free imaging of curved objects; superior water resistance allows long-term underwater imaging. This work highlights hierarchical encapsulation in balancing luminescence efficiency and stability, offering a pathway toward practical flexible perovskite scintillators.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506080
Thallium (Tl) is a highly toxic trace heavy metal, posing severe risks to human health and the environment. Cement kilns are significant sources of gaseous Tl emissions, with concentrations up to 25 μg·m−3, which can poison SCR catalysts and cause environmental contamination. This study developed MnO2/γ-Al2O3 adsorbents via wet impregnation with varying Mn loadings (0–15 wt%) to capture gaseous TlCl. Fixed-bed adsorption experiments at 300 °C with 20% O2 revealed that capture capacity initially increased with Mn loading, peaking at 10 wt% MnO2 (10MnO2/γ-Al2O3), then declined at 15 wt%. Characterization (XRD, O2-TPD, H2-TPR) indicated that Mn species enhanced redox properties, oxidizing Tl+ to Tl3+ and immobilizing it on the surface. DFT calculations showed that TlCl forms stronger Al–Cl and Mn–Cl bonds on MnO2/γ-Al2O3 than on γ-Al2O3, with higher adsorption energy and greater charge transfer, corroborating experimental results. The optimal adsorbent, 10MnO2/γ-Al2O3, demonstrates superior Tl capture performance, offering a promising upstream solution for protecting SCR catalysts and reducing atmospheric Tl emissions from cement kilns.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022302
The escalating environmental contamination by mercury ions (Hg2+) poses severe risks to ecosystems and human health, necessitating the development of rapid, sensitive, and cost-effective detection methods. In this study, Fe1-xS@CNT composite nanozymes were synthesized via a straightforward solvothermal approach. The nanozymes exhibit uniform morphology, structural stability, and significant peroxidase (POD)-like activity. The incorporation of carbon nanotubes (CNT) facilitates electron transfer, enhancing the Fenton reaction between Fe2+/Fe3+ to generate abundant reactive oxygen species (ROS), primarily hydroxyl radicals (·OH) and superoxide anions (·O2−). The synergistic action of these ROS and photogenerated holes (h+) promotes the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue-colored product (oxTMB), establishing a colorimetric system of Fe1-xS@CNT + H2O2 + TMB. The specific binding of S2− on the nanozyme surface to Hg2+ inhibits POD activity, reducing the absorbance of the system. This principle was harnessed to develop a colorimetric method for Hg2+ quantification in environmental water samples. The method demonstrates a linear range of 0.1–500 μg·L−1 and a limit of detection (LOD) of 0.04 μg·L−1. Validation in real water samples (campus and tap water) showed recoveries between 94.4% and 111.1% with relative standard deviations (RSD) below 3.0%, comparable to atomic fluorescence spectrometry. The method offers advantages of simplicity, rapid analysis, and naked-eye visibility, providing a novel approach for on-site monitoring of heavy metal pollutants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3864-4
Organic room temperature phosphorescence (RTP) materials, particularly those emitting in the near-infrared (NIR) region, hold great promise for bioimaging due to their deep-tissue penetration and minimal autofluorescence interference. However, achieving efficient NIR RTP with long lifetimes remains challenging due to inefficient triplet exciton utilization. Herein, we propose a dark triplet state activation strategy to achieve efficient NIR RTP by leveraging host–guest energy transfer. Using benzophenone derivatives (BP, OBP, MBP, PBP) as rigid host matrices with high intersystem crossing (ISC) efficiency and an NIR fluorophore (MPTCF) as the guest, we achieve efficient Dexter-type triplet-triplet energy transfer (TTET) that converts non-emissive host triplets into guest-centered NIR phosphorescence. Systematic optimization of the host–guest system has shown that PBP/MPTCF exhibits exceptional performance, including long phosphorescence centered at 705 nm, an ultralong phosphorescence lifetime (210.3 ms), and high ISC efficiency (44.4%). When fabricated into nanoparticles (NPs), PBP/MPTCF exhibits superior performance, featuring prolonged phosphorescence signals (>120 s), deep tissue penetration capability (>2 mm), and excellent biocompatibility (cell viability >95% at 300 μM). In addition, this system enables high-contrast subcutaneous imaging with excellent dispersibility and stable in vivo imaging capability. More importantly, PBP/MPTCF NPs demonstrate precise lymph node mapping through time-gated phosphorescence imaging and efficient tumor visualization within 4 h post-injection with a high tumor-to-liver ratio of 2.8. The successful activation of dark triplet states through this host–guest approach provides a general design principle for developing high-performance NIR RTP materials, while the demonstrated biomedical applications highlight their significant potential for advanced bioimaging and precision diagnostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3799-4
Li-rich layered oxides (LLOs) xLi2MnO3·(1−x)LiTMO2 (0 < x < 1, TM = Mn, Ni, Co, etc.) are promising high-energy cathode materials for lithium-ion batteries, capable of achieving energy densities up to 1000 Wh kg−1. However, their practical application is hindered by limited cycle life and voltage decay, primarily stemming from structural instability of Li2MnO3 and LiTMO2 domains during cycling, which manifests as transition metal cation migration, oxygen release, and TM dissolution. This review establishes a comprehensive design and modification scheme based on the fundamental structural unit of LLOs: the LiMn6 hexatomic-ring. In this unit, each Li atom in the TM layer is surrounded by six Mn atoms, forming a π-type hybridization between Mn 3d(t2g) and O 2p orbitals, creating an intact π-bond ring that acts as a distributed redox center. Ordering these functional units into specific spatial configurations can enhance capacity, voltage, and structural stability. However, substituting Mn with other elements breaks the symmetry of the π-bond ring, altering redox behavior and reversibility. The spatial arrangement of LiMn6 rings, representing the arrangement of π-bond rings, is critical for redox activity. In Li2MnO3, the typical honeycomb superstructure of LiMn6 rings is discussed. This review highlights the importance of functional unit ordering in material design, drawing parallels from other systems, and proposes a systematic approach to engineer LLOs for improved electrochemical performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041502
Microplastics (MPs), defined as plastic particles smaller than 5 mm, are ubiquitous environmental contaminants with documented presence in urban, rural, marine, remote, and polar atmospheres. The atmosphere serves as a primary medium for their long-range transport, raising concerns regarding climate interactions and human health. This review synthesizes recent advances in atmospheric MPs research, encompassing sampling strategies, pretreatment protocols, analytical techniques, occurrence characteristics, and ecological ramifications. Passive and active sampling methods are delineated, with active samplers enabling quantitative flux measurements. Pretreatment typically involves sequential steps of sieving, density separation, digestion, staining, and filtration to isolate MPs from complex matrices. Identification relies on visual inspection, micro-Fourier transform infrared spectroscopy (μ-FTIR), micro-Raman spectroscopy, laser direct infrared imaging (LDIR), and mass spectrometry. Reported atmospheric MPs predominantly exhibit dimensions below 700 μm, with fibrous morphologies being most prevalent. Color distribution is dominated by black, followed by white and transparent particles. Over 20 polymer types have been identified, with textiles, tire wear, and dust identified as principal sources. Atmospheric MPs can influence solar radiation balance, cloud formation processes, and pose risks to flora, fauna, and human health. However, research remains nascent; standardization of sampling and analytical protocols, along with comprehensive toxicological assessments, are critical knowledge gaps requiring urgent attention.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4016-3
Rare earth-based electromagnetic wave (EMW) absorbing materials are promising due to their strong dielectric and magnetic loss capabilities, yet effective enrichment and utilization of rare earth ions remain challenging. Here, an anionic imidazolium-based metal-organic framework (MOF), MOZ-200, is employed to enrich multiple rare earth ions (La3+, Ce3+, Pr3+, Nd3+, Y3+) via host-guest interactions. The anionic framework uniformly confines these ions, which are converted in situ into highly dispersed high-entropy rare earth alloy nanoparticles during carbonization. The resulting HE@C composites feature a conductive, graphitized carbon matrix with abundant multi-scale polarization centers and heterogeneous interfaces, enhancing dipole polarization, interface polarization, and conductive loss. Consequently, the material achieves excellent EMW absorption in the Ku band, with a minimum reflection loss of -79.20 dB and a maximum effective absorption bandwidth of 5.23 GHz. Integrated into a polyurethane matrix, a multifunctional flexible device is realized, offering EMW absorption, photothermal heating, microwave de-icing, and hydrophobicity. This work provides a feasible strategy for rare earth ion utilization and advances the design of flexible multifunctional EMW absorbing materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4196-x
Aqueous zinc-ion batteries (AZIBs) are promising for safe, low-cost energy storage, but accurate cathode characterization is essential for understanding their electrochemical behavior. This study identifies a critical artifact: routine air-drying of deeply discharged cathodes triggers spontaneous aerial oxidation, which distorts post-mortem analysis. Using NH4V4O10 (NVO) as a model cathode, we show that ex situ X-ray photoelectron spectroscopy (XPS) of discharged electrodes reveals only V4+/V5+ signals, with no detectable V3+, implying a theoretical capacity of only 245.5 mAh g−1, yet experimentally measured capacity reaches ~334.5 mAh g−1 at 0.2 A g−1. This discrepancy arises because air exposure during sample preparation oxidizes the reduced vanadium states, leading to a self-charging effect that recovers ~83% of capacity. Electrochemical re-oxidation (EO-NVO) is superior to aerial oxidation (AO-NVO), producing a stable, long-range ordered bulk structure with efficient Zn2+ transport channels, whereas aerial oxidation induces only superficial changes and structural disorder. These findings resolve a key analytical inconsistency and reveal a novel capacity-contribution pathway, with direct implications for accurate material assessment and advanced battery design.