SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4108-1
Heterogeneous catalysis underpins modern energy conversion, chemical manufacturing, and environmental remediation, yet its advancement is constrained by the scarcity and cost of noble metals. A sustainable alternative lies in activating intrinsically inert sites in earth-abundant materials such as transition metal oxides and carbon-based materials. This review systematically outlines recent advances in activating inert sites within low-cost catalytic materials. We begin by dissecting the physicochemical origins of catalytic inertness, including local atomic symmetry, electronic spin states, and coordination environments. Subsequently, we elucidate mechanisms by which multi-scale strategies—structural engineering, quantum state engineering, and microenvironment engineering—break symmetry, modulate spin states, and construct unique reaction microenvironments, transforming spectator atoms into highly efficient active centers. The review highlights performance breakthroughs in key reactions such as oxygen evolution reaction (OER) and alkane dehydrogenation, where catalytic metrics now rival or surpass noble metal benchmarks. For instance, triangular-ordered Co atoms achieve ampere-level hydrogen production, and tensile strain engineering activates inert non-defect Bi sites for CO2 electroreduction. We critically assess challenges—stability, scalable synthesis, and cost-effectiveness—that hinder industrial translation. Future directions emphasize multi-strategy synergy and artificial intelligence-assisted rational design. This review provides theoretical guidance and technological pathways for subverting noble-metal-dependent paradigms and developing next-generation efficient, low-cost catalytic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3585-1
Semiconductor-based surface-enhanced Raman scattering (SERS) substrates have attracted significant attention due to their high uniformity, reproducibility, stability, and cost-effectiveness. However, the Raman enhancement in semiconductors primarily relies on the chemical mechanism (CM), which typically results in a lower enhancement capability compared to traditional noble metals. In this study, we developed a novel two-dimensional (2D) SERS substrate, Ag2Te nanosheets (NSs), synthesized through a simple one-step redox reaction utilizing 2D Te NSs as the template. The 2D Ag2Te NSs not only exhibit strong interfacial interactions with molecules, thereby supporting the CM, but also possess quasi-metallic properties with low resistivity (2.8 × 10−4 Ω cm) and high density of free electrons (4.15 × 10^22 cm−3), giving rise to a significant visible-region surface plasmon resonance (SPR) band and contributing to enormous electromagnetic mechanism (EM). By synergizing CM and EM, the 2D Ag2Te NSs SERS substrate achieved an ultra-low limit of detection (LOD) of 10−10 M with an enhancement factor (EF) of 2.6 × 10^7 for methylene blue (MB), outperforming most semiconductors, even rivaling noble metals. The quasi-metallic properties of 2D Ag2Te NSs also benefit their sensitivity to multiple molecules. The accuracy and reliability were demonstrated in real-sample detections with recoveries of 91.5%–108.3% for various target molecules. These excellent performances, combined with remarkable cost-effectiveness, demonstrate the potential of 2D Ag2Te NSs as a practical SERS substrate with broad applicability. Furthermore, the inherent structural simplicity of these nanosheets creates significant opportunities for further sophisticated nanostructural engineering to advance the SERS performance in the future.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3706-3
Aprotic lithium-oxygen (Li-O2) batteries are severely limited by slow cathode reaction kinetics and large polarization. Herein, we design and prepare a Mott-Schottky catalyst by uniformly embedding ultrafine Ru nanoparticles on nitrogen-doped carbon (Ru@NC) nanoflakes to accelerate oxygen redox kinetics of Li-O2 batteries. The Mott-Schottky effect of Ru@NC drives spontaneous electron rearrangement in the NC matrix and induces a strong built-in electric field at heterointerfaces, which accelerates the activation and conversion of oxygen intermediates. The obtained Ru@NC possesses rich Mott-Schottky heterointerfaces and defective carbon structures, which provide extensive adsorption and nucleation sites. More importantly, Ru@NC manifests moderate affinity for the intermediate LiO2, inducing formation of unique nanosheet-like Li2O2 with low Li2O2/cathode interfacial impedance, which further enhances oxidation kinetics. These enable the Li-O2 battery with Ru@NC to deliver a remarkably reduced polarization of 0.89 V, superior rate performance, and prolonged lifespan of over 200 cycles. This work will provide valuable guidelines for engineering advanced electrocatalysts for high-performance Li-O2 batteries and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3746-x
The polyanionic compound Na3V2(PO4)2O2F (NVPOF) possesses a stable three-dimensional framework, high theoretical specific capacity, and favorable operating voltage, yet its sluggish Na+ diffusion kinetics and low electronic conductivity impede industrial application. This study proposes a dual regulation strategy combining carbon coating and heat treatment temperature to synergistically enhance crystallinity and electrochemical performance. NVPOF@C-400 and NVPOF@C-600 were synthesized via in-situ dopamine hydrochloride coating followed by heat treatment at 400 °C and 600 °C, respectively. Carbon coating at 600 °C significantly improved crystallinity and increased electronic conductivity by three orders of magnitude through the carbon layer's conductive network. The ~4.5 nm carbon layer effectively suppressed abnormal grain growth and secondary crystallization aggregation at high temperatures, maintaining uniform particle size of approximately 0.36 μm, which shortens Na+ diffusion pathways and prevents ion transport obstruction. Consequently, NVPOF@C-600 delivered a high discharge capacity of 102.5 mAh g−1 at 20 C and retained 96.5% capacity after 10,000 cycles. In a full-cell configuration with hard carbon (HC), NVPOF@C-600//HC achieved an impressive 89.3% capacity retention after 9,000 cycles. This work provides critical insights for practical implementation of high-performance NVPOF cathodes in sodium-ion batteries.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604005
To elucidate the effects of exogenous antibiotic-resistant bacteria (ARB) exposure on wheat growth and associated bacterial community assembly, the inhibitory impacts of exogenous ARB on wheat seedling root and shoot length, shifts in root endophytic and rhizosphere bacterial communities, and the horizontal transfer of exogenous antibiotic resistance genes (ARGs) to indigenous endophytic bacteria were investigated using plate culture counting and 16S rRNA high-throughput sequencing. The results showed that exogenous ARB exposure significantly suppressed wheat seedling root and shoot growth, with inhibition rates increasing in an ARB concentration-dependent manner. At an exogenous ARB concentration of 108 CFU/mL, the inhibition rates of seedling root and shoot length reached 68.83% and 36.87%, respectively. During the period of ARB exposure, the relative abundance of Clostridium_sensu_stricto_5 in root endophytic bacteria increased rapidly, becoming the most dominant genus (45.02%) by the end of the exposure period. In contrast, Betaproteobacteriales remained the dominant order in the rhizosphere bacterial community throughout the experiment, with its relative abundance increasing continuously over time. The proportion of ARB-carrying endophytic bacteria initially decreased and then increased during exposure, showing a significant positive correlation with the relative abundances of Clostridium_sensu_stricto_5, Clostridium_sensu_stricto_1, Bacillus, and Paenibacillus (P<0.05). In summary, exogenous ARB exposure significantly inhibits wheat seedling growth and alters the community structure of both root endophytic and rhizosphere bacteria. Sustained ARB exposure leads to the transfer of exogenous ARGs to root endophytes, and Clostridium_sensu_stricto species may act as potential hosts for ARGs in wheat seedling roots.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3750-6
SnSe is a promising thermoelectric material for medium-temperature applications due to its ultralow lattice thermal conductivity. However, the poor electrical conductivity of n-type polycrystalline SnSe significantly hinders its practical application. Here, we propose a dual-functional strategy employing InBr3 doping to synergistically enhance electrical transport while suppressing lattice thermal conductivity. For the first time, we demonstrate the successful construction of a Br-enriched conductive network within the SnSe matrix. The incorporation of In3+ and Br− introduces high-density charge carriers, while Br forms percolative conductive networks, resulting in a remarkable enhancement of carrier mobility to ~20.64 cm2 V−1 s−1. Simultaneously, the lattice thermal conductivity is substantially reduced to ~0.25 W m−1 K−1 through the formation of multi-scale defects, including dislocations and Br-rich nanowires, which effectively enhance phonon scattering. As a result, we achieve a peak figure of merit of ZT ~1.41 at 823 K, with an average figure of merit of ~0.42 over the temperature range of 323–823 K. This work provides a universal paradigm for decoupling electron-phonon interactions in thermoelectric materials, offering new insights for the optimization of thermoelectric performance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040202
Halophenols are highly toxic disinfection byproducts and common taste-and-odor pollutants in drinking water. In this study, a palladium catalyst confined within the pores of UiO-66 (Pd@UiO-66) was prepared via a double-solvent method and applied for the catalytic hydrodechlorination of 4-chlorophenol (4-CP). A surface-supported catalyst (Pd/UiO-66) was synthesized by deposition-precipitation as a benchmark. Comprehensive characterization using ICP-OES, XRD, TEM, EDX mapping, XPS, and in situ CO-IR revealed that Pd@UiO-66 exhibited smaller Pd particle sizes, higher Pd dispersion, and a greater proportion of cationic Pd species (Pdn+) compared to Pd/UiO-66. These features enhanced the activation and cleavage of the C–Cl bond. Catalytic tests demonstrated that Pd@UiO-66 achieved >90% removal of 4-CP within 15 minutes, with phenol as the sole degradation product, showing significantly lower predicted toxicity (ECOSAR) than the parent compound. The kinetics followed the Langmuir-Hinshelwood model. Pd@UiO-66 exhibited 2.1 times higher initial activity and 1.2 times higher turnover frequency than Pd/UiO-66. Moreover, the pore confinement effect imparted high stability, with no significant loss in initial activity (within 10%) after five reaction cycles. These results highlight the potential of confined Pd catalysts for efficient removal of halophenolic odorants from water.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608024
Microbial remediation is a widely used technology for treating chromium pollution in groundwater. This study conducted a bibliometric analysis of 441 papers from the Web of Science Core Collection (2010–2024) using CiteSpace, VOSviewer, and Pajek. The publication trend increased over the period, with three developmental stages identified: early (2010–2016) focusing on basic treatment methods, intermediate (2017–2019) on intrinsic mechanisms, and recent (2020–2024) on process optimization. Biological adsorption and reduction were identified as the primary mechanisms. Correlation and principal component analyses of environmental factors (temperature, pH, initial Cr concentration, reaction time) revealed temperature as the key factor affecting remediation efficiency. The removal efficiencies and mechanisms of various dominant bacterial strains were summarized to guide strain selection. Future research should focus on microbial community synergy, nanomaterial integration, and environmental optimization to enhance remediation efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3996-x
Bioadhesives that rapidly and reliably seal wet tissues remain a formidable challenge due to the trade-off between mechanical compliance and swelling-induced instability in physiological environments. To address this limitation, we report a hydrophobic effect-mediated bioadhesive, consisting of methacrylated phenylalanine hyaluronic acid (HA) adhesive (MPAH), which integrates ultrafast photo-crosslinking with strong tissue adhesion and low swelling. Through the synergistic incorporation of hydrophobic phenylalanine groups and N-hydroxysuccinimide (NHS) esters, MPAH forms gelation within 2 s under UV irradiation, significantly outperforming commercial fibrin glues. The adhesive shows a lap shear strength of ~35 kPa on wet porcine casings, an extensibility exceeding 60%, and a compressive strength of ~475 kPa. In contrast to conventional HA hydrogels and commercial fibrin glues, MPAH maintains a low equilibrium swelling ratio below 30% in PBS over 16 days. This behavior is attributed to hydrophobic interactions and π-π stacking within the network, effectively preventing tissue compression and interfacial detachment. In rat wound models of linear incision and full-thickness skin defects, MPAH demonstrated rapid sealing, reduced inflammation, and accelerated re-epithelialization compared to fibrin glue and sutures, highlighting its potential as an effective bioadhesive for wound closure and soft tissue repair.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4031-6
Organic fluorophores operating in the second near-infrared (NIR-II, 1000–1700 nm) window are highly attractive for cancer phototheranostics. Yet, the advancement of aza-BODIPY-based NIR-II dyes remains challenging due to their limited spectral tunability and diminished fluorescence quantum yields (FLQY) under physiological conditions. Herein, we propose a rational donor-acceptor (D-A) molecular engineering strategy to construct an aza-BODIPY fluorophore, TPACN, featuring intramolecular charge transfer (ICT)-enhanced NIR-II emission and balanced photothermal performance. By introducing electron-rich triphenylamine (TPA) donors and peripheral cyano (–CN) acceptors, the optimized D-A coupling significantly strengthened the ICT effect, leading to broadened NIR absorption, a markedly red-shifted fluorescence peak at 1086 nm, and an exceptional fluorescence quantum yield of 1.55% in dichloromethane (DCM). When encapsulated in F127, TPACN nanoparticles (TPACN NPs) maintained a high aqueous FLQY of 0.20%, accompanied by a notable photothermal conversion efficiency (PCE) of 39% under 808 nm irradiation. The sterically twisted TPA units effectively alleviated aggregation-caused quenching (ACQ) and fine-tuned the excited-state energy dissipation pathways, realizing a synergistic balance between radiative (fluorescence) and non-radiative (heat) relaxation. Benefiting from these optimized photophysical properties, TPACN NPs achieved high-resolution NIR-I photoacoustic and NIR-II fluorescence dual-modal imaging, enabling accurate tumor visualization and efficient photothermal ablation in vivo. This work introduces a general design paradigm that exploits ICT modulation and steric engineering to overcome the intrinsic fluorescence bottleneck of aza-BODIPY systems, offering new molecular insights for the advancement of high-performance NIR-II dyes for precision phototheranostics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60666-4
The catalytic hydrogenation of CO2 to ethanol is a pivotal technology for carbon neutrality and high-value chemical production. Cobalt-based catalysts, with their unique electronic structure and tunability, are promising for this reaction, yet challenges persist: low single-pass CO2 conversion, ethanol selectivity below 60%, and rapid deactivation. This review systematically analyzes recent progress, establishing the thermodynamic and kinetic framework, and dissecting molecular-level mechanisms, particularly C–C bond formation and controlled oxygen removal. It critically evaluates synergistic effects among metallic Co, Co2C, CoOx, and bimetallic configurations, emphasizing structure-activity relationships influenced by supports and promoters. Inverse catalysts and tandem systems are reviewed, along with water's role as a hydrogen source. The review identifies shortcomings and advocates for advanced in situ/operational characterization and theoretical modeling to guide next-generation catalyst design. Key findings from cited studies include: Co/La4Ga2O9 achieving high selectivity (reference [85]); K-loaded Cu/CoOx boosting ethanol production (reference [86]); Ga-promoted CuCo catalysts with Cu-CoGaOx interfacial sites (reference [88]); and Mo-tailored CoFe alloys suppressing over-carburization (reference [89]). These insights provide a framework for developing efficient cobalt-based systems, deepening mechanistic understanding, and accelerating sustainable ethanol production.