SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4279-0
Inkjet printing has emerged as a viable additive manufacturing route for organic light-emitting diodes (OLEDs), offering drop-on-demand patterning, high material utilization, and compatibility with large-area flexible substrates. This review critically examines the formulation science, printhead physics, and drying kinetics that govern the quality of inkjet-printed organic layers. We analyze the rheological window required for stable jetting, typically 1–20 mPa·s viscosity and 25–45 mN/m surface tension, and the dimensionless Ohnesorge number (0.1 < Z < 1) that defines satellite-free droplet formation. The coffee-ring effect, driven by capillary flow and solvent evaporation gradients, remains the dominant failure mode for pixel non-uniformity; binary solvent systems and substrate temperature control (40–60 °C) mitigate this. We survey recent progress in printed hole-transport, emissive, and electron-transport layers, with particular attention to cross-linkable hole-transport materials that resist interlayer dissolution. Device performance metrics from printed OLEDs now reach external quantum efficiencies of 15–20% for fluorescent emitters and >25% for phosphorescent systems, with operating lifetimes (T95) exceeding 1,000 hours at 1,000 cd/m². We identify remaining bottlenecks: nozzle clogging from aggregated nanoparticles, film thickness variation across large panels, and the absence of standardized ink formulations. The review concludes with a roadmap for industrial adoption, emphasizing in-line metrology and closed-loop process control as prerequisites for yield parity with vacuum-deposited OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3608-8
Polymeric carbon nitride (PCN) is a promising photocatalyst for H2O2 production due to its visible-light response, low cost, and high selectivity for the two-electron oxygen reduction reaction (ORR). However, its H2O2 yield is limited by narrow light absorption, low charge separation efficiency, and insufficient active sites. Here, crystalline poly(heptazine imide) (PHI)-based carbon nitride with highly dispersed In sites and N defects was prepared via an ionothermal method using LiCl/KCl molten salts. The large π-conjugated system and N defects enhance visible-light harvesting. Remaining K+ ions in nitrogen cavities act as interlayer electron channels, while N defects induce asymmetric charge distribution on the heptazine network, promoting interlayer and in-plane charge separation and transfer. In sites accelerate charge transfer dynamics and serve as active sites for ORR. The synergistic effect of metal modification and defect engineering boosts electron delocalization, significantly improving photocatalytic activity. The H2O2 production rate of 10InPHI reaches 15.3 mmol g−1 h−1 via a two-step single-electron ORR pathway, underscoring the potential of modified carbon nitride for efficient H2O2 photosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3575-4
Halide perovskite memristors, known for their ion mobility, have emerged as strong candidates for computational units in next-generation memory and neuromorphic computing systems. Nevertheless, most memristors are limited to operating in a single mode, either resistive switching or threshold switching. In this work, we overcome this limitation by developing dual-mode α-formamidinium lead triiodide (α-FAPbI3) perovskite memristors with switchable volatile/nonvolatile states, enabled by engineered SnO2 electron transport layers (ETLs). Through molecular interface optimization using 3-(N,N′-dimethylmyristylammonio) propanesulfonate (Z14) and 4,4′-(1,10-phenanthroline-3,8-diyl)bis(N,N′-bis(4-methoxyphen-yl)aniline) (PNL), we achieved exceptional device stability. Volatile devices exhibited >500 switching cycles, while nonvolatile devices surpassed 1000 cycles, both maintaining a high on/off ratio (~10^3). Beyond memory applications, these devices successfully emulated biological functionalities. The volatile mode replicated four key nociceptor characteristics (threshold, relaxation, sensitization, and no adaptation), while the nonvolatile mode demonstrated advanced synaptic plasticity, including paired-pulse facilitation (PPF) and spike-timing-dependent plasticity (STDP). Capitalizing on this dual-mode synergy, we constructed a spiking neural network (SNN) for handwritten digit recognition, achieving a 93% accuracy rate—a significant milestone for perovskite-based neuromorphic systems. This study not only provides a material-level strategy for multifunctional memristor design but also bridges the gap between biological sensing and artificial intelligence, paving the way for adaptive neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3882-y
Organic semiconductor crystals with well-defined morphologies are highly desirable for high-performance optoelectronic devices, yet precise control over their growth remains a challenge. Here, a novel donor-acceptor (D-A) molecule, TQDPT, has been successfully developed, featuring a rigid π-conjugated acceptor core composed of thiazoloquinoxaline and naphthalene, coupled with phenylphenothiazine donors. This study presents a temperature-mediated crystallization strategy for precisely controlling the morphology and carrier transport properties of TQDPT single crystals. By systematically investigating the growth kinetics across a controlled temperature range (15–35°C), we reveal a distinct transition from needle-like structures to plate-like crystals, with tunable average widths spanning from around 2.8 to 30.1 μm. This morphological evolution is driven by temperature-dependent molecular diffusion and nucleation kinetics. Significantly, the plate-like crystals grown at 25°C exhibit an order-of-magnitude enhancement in mobility compared to needle-like counterparts, while higher temperatures of 35°C yield broader crystals with improved carrier mobility and device stability. This work highlights the critical role of temperature as a pivotal parameter in the dimensional and electronic optimization of organic crystals, offering an attractive approach to optimize functional materials for advanced optoelectronics.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61113-4
Porous pyrolytic carbon (PPyC) serves as the buffer layer in TRi-structural ISOtropic (TRISO) fuel particles, providing storage for fission gases, preventing damage to outer layers, and absorbing stresses caused by fuel-kernel swelling. However, the changes of PPyC micro- and meso-structure at high temperatures remain insufficiently understood. In this study, PPyC fabricated by chemical vapor deposition was heat-treated from 1200 to 1600 °C and characterized across atomic-to-mesoscopic scales. Results show that the structure changes with temperature with a transition at approximately 1400 °C. Below 1400 °C, a decrease in Raman ID/IG ratio, narrowing of the graphite diffraction peak, and increased sp2 hybridization indicate progressive ordering associated with defect redistribution. Concurrent decreases in true density and mesopore volume, together with increased closed porosity, are consistent with partial conversion of open pores into closed pores. Above 1400 °C, increased ID/IG ratio, broadening of the diffraction peak near the rhombohedral graphite (101) reflection, and transition regions between crystalline and amorphous material observed by TEM indicate increasing structural disorder. Meanwhile, initially distinct PPyC particle boundaries blur and merge into broad, plate-like domains. Subsequent decrease in closed porosity and increase in mesopore surface area are consistent with partial connection of closed pores to the open-pore network. This work shows that intrinsic coupling between atomic-scale structural change and mesoscale pore connectivity provides a basis for assessing high-temperature structural stability of PPyC in TRISO fuel particles.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61093-1
Advanced catalyst structures with good active site accessibility and strong metal-support interactions are crucial for oxygen reduction reaction (ORR) catalysis. A hierarchically porous Pt catalyst supported on honeycomb-like nitrogen-doped carbon (Pt/HNC-400, where 400 denotes the optimal dosage (mg) of the sacrificial SiO2 hard template used during synthesis) was fabricated by combining template-assisted pyrolysis and alcohol reduction. The fabrication involves the template-assisted pyrolysis of ZIF-67 (which provides the N-dopant through its 2-methylimidazole ligand) followed by HF etching to completely remove the SiO2, yielding a 3D interconnected porous carbon support. Compared to a commercial Pt/C, it had an exceptional ORR performance with a half-wave potential of 0.901 V (41 mV higher), a mass activity at 0.9 V that was 15.3 times higher, and significantly improved durability (a half-wave potential decay of 25 mV vs. 80 mV after 10,000 accelerated durability tests (ADTs)). Mechanistic investigations showed that this superior performance is due to the combined effects of the 3D porous structure, ultrafine Pt nanoparticles with strong metal-support interactions, and in-situ formed Co-Nx moieties from the pyrolysis of precursor ZIF-67. After 10,000 ADTs it was shown to have excellent structural integrity, retaining 87.4% of its initial electrochemically active surface area (102.7 m2 g−1). This study may assist the development of new high-performance ORR catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3894-9
Photocatalytic production of hydrogen peroxide (H2O2) using water and O2 offers an economical, environmentally friendly, and sustainable route for H2O2 synthesis. However, current photocatalytic systems suffer from poor charge carrier transport, narrow light absorption, and insufficient active sites, leading to unsatisfactory H2O2 production efficiency. In this study, a CoS/ZnIn2S4 (ZIS) composite was constructed by in-situ growing CoS nanoclusters on ZIS via a solvothermal method for photocatalytic H2O2 production. The integration of CoS with ZIS broadened the light absorption spectrum. The optimized CoS/ZIS-3 composite exhibited an exceptional H2O2 production rate of 2693.39 μmol g−1 h−1 under visible light in isopropanol, surpassing pristine ZIS and CoS by factors of 6.54 and 18.08, respectively. The S-scheme heterojunction and built-in electric field synergistically enhanced the separation and transportation of photogenerated charge carriers, thereby improving photocatalytic efficiency. The H2O2 synthesis mechanism involves dual-channel oxygen reduction and water oxidation reactions mediated by CoS/ZIS. The produced H2O2 effectively degraded organic pollutants and inhibited the growth of E. coli. This study presents a promising green strategy for enhancing ZIS-based photocatalysts through constructing S-scheme heterojunctions for efficient H2O2 synthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3885-8
Photocatalytic production of hydrogen peroxide (H2O2) via oxygen reduction reaction (ORR) and water oxidation reaction (WOR) from water and air offers a sustainable alternative to conventional anthraquinone processes. However, the intrinsic kinetic mismatch—fast ORR (microseconds to milliseconds) versus sluggish WOR (seconds)—limits overall efficiency. Here, we report aliphatic acylhydrazone covalent organic frameworks (AA-COFs) synthesized by coupling aliphatic hydrazides with benzotrithiophene motifs via acylhydrazone linkages. The pore walls are decorated with abundant S, O, and N heteroatoms, enhancing affinity toward both O2 and H2O, thereby improving the kinetics of both half-reactions. Through single-carbon atomic engineering, the optimized AA-COF achieves a trade-off between ORR and WOR kinetics, enabling efficient overall H2O2 photosynthesis from water and air without sacrificial agents. The material exhibits a H2O2 production rate of 4777 μmol g−1 h−1 and an O2 utilization/conversion efficiency of 99.3%. This work demonstrates that rational design of heteroatom-rich COFs can synchronize ORR and WOR, overcoming a major bottleneck in artificial photosynthesis.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510034
Phosphonate wastewater, characterized by stable C–P bonds, poses significant environmental risks due to its resistance to degradation and potential to contribute to eutrophication. This study developed a chloride-enhanced Fe(II)/PMS/H2O2 system for the oxidative degradation of 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC) and simultaneous recovery of phosphorus as iron phosphate (FePO4). Under optimal conditions (0.1 mmol/L PBTC, 1.0 mmol/L Fe(II), 0.5 mmol/L PMS, 0.5 mmol/L H2O2, 10 mmol/L NaCl, initial pH 3.0, 60 min), total phosphorus (TP) removal reached 100%, with phosphorus nearly completely recovered as FePO4 precipitate. Increasing NaCl concentration and temperature enhanced TP removal, while pH significantly influenced removal efficiency and product speciation; acidic conditions (pH < 4.3) favored FePO4 precipitation. Coexisting Ca2+ and Mg2+ had negligible effects, whereas HCO3− and humic acid (HA) inhibited TP removal in a concentration-dependent manner. Radical quenching and electron spin resonance (ESR) analyses identified hydroxyl radicals (•OH), ferryl ion (Fe(IV)=O), sulfate radicals (SO4•−), and chlorine radicals (Cl•) as primary reactive species, with •OH playing a dominant role. Chloride introduction promoted the generation of multiple reactive species, and Cl• and its derivative Cl2•− directly attacked the C–P bond and phosphonate group, facilitating phosphorus release as PO43− and subsequent FePO4 formation. The system's feasibility was validated using actual industrial circulating cooling water. This study provides a novel approach for phosphonate wastewater treatment and phosphorus recovery.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4010-4
Liver fibrosis, a critical pathological consequence of chronic liver injury, remains a therapeutic challenge due to its complex mechanisms and limited effectiveness of conventional treatments. Recent advancements in two-dimensional (2D) nanomaterials, such as graphene derivatives, transition metal dichalcogenides (TMDs), black phosphorus nanosheets (BPNSs), MXenes, and layered double hydroxides (LDHs), have created novel opportunities for antifibrotic therapy. These materials exhibit exceptional physicochemical properties, including ultrahigh surface area, tunable surface chemistry, biocompatibility, and photothermal/electrochemical functionalities, enabling multifaceted interventions in fibrosis progression. The core therapeutic strategies mainly involve modulating hepatic stellate cells (HSCs) activation, inhibiting excessive extracellular matrix (ECM) deposition, and alleviating oxidative stress and inflammatory responses. However, 2D nanomaterials still face great challenges, such as long-term biosafety, precise functionalization for tissue-specific targeting, and scalable synthetic methods. This review systematically summarizes the recent breakthroughs in anti-fibrosis strategies based on 2D nanomaterials, elucidates their potential mechanisms of action, and explores the prospects for clinical translation of these nanoplatforms. Serving as a nexus between materials science and hepatology, 2D nanomaterials offer revolutionary prospects for precision medicine applications in hepatic fibrosis management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4076-x
The transition from laboratory-scale to industrial hydrogen peroxide (H2O2) production hinges on achieving ultra-high photocatalytic efficiency. Herein, we demonstrate a nitrogen-substitution engineering strategy for photocatalysts by replacing partial carbon atoms in benzene-1,3,5-triamine with nitrogen atoms, showing dual synergistic effects: (1) electronic structure modification upon electronegativity and dipole moment of the building blocks, creating built-in electric fields that promote charge separation and interfacial electron transfer; (2) enhancement in adsorption of reaction intermediates significantly boosting oxygen reduction reaction (ORR) and water oxidation reaction (WOR) kinetics. This dual-modification system exhibits broadband light absorption extending to 700 nm (near-infrared), enabling outstanding performance under ambient conditions with a H2O2 production rate of 12099 μmol g−1 h−1 from water and O2 without any sacrificial agent, an apparent quantum efficiency (AQE) of 19% at 500 nm, and a solar-to-chemical energy (SCC) efficiency of 1.38%. This work establishes atom-engineered nitrogen substitution as a general approach for designing high-performance photocatalysts, offering a viable pathway for large-scale H2O2 production with solar-driven chemical synthesis paradigm.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510017
Municipal solid waste (MSW) is a significant source of urban carbon emissions. This study integrates life cycle assessment (LCA) and system dynamics (SD) to construct a multi-subsystem LCA-SD model covering economy, population, waste generation, transportation, treatment, and resource utilization, using Fuzhou City as a case study. The model was validated against historical data and uncertainty analysis. Carbon emissions from MSW transportation, treatment, and resource utilization during 2013–2023 were calculated, and emission trends under seven reduction scenarios for 2024–2035 were predicted. Results show that Fuzhou's MSW treatment evolved through three stages: 'landfill+incineration', 'treatment structure adjustment', and 'incineration+kitchen waste resource utilization', corresponding to emission growth, fluctuation, and reduction periods. In 2023, total net carbon emissions were 1.07×10^6 t CO2-eq, with incineration being the largest contributor (9.93×10^5 t), followed by transportation (2.93×10^4 t), leachate treatment (2.14×10^4 t), and kitchen waste treatment (7.90×10^3 t, negative emission). Scenario analysis indicates that without further measures, carbon neutrality cannot be achieved. Synergistic enhancement of kitchen waste separation and incineration power generation efficiency can significantly boost reduction, potentially achieving carbon neutrality by 2032. The study provides a dynamic accounting and scenario assessment framework for low-carbon transition of urban solid waste systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041502
Microplastics (MPs), defined as plastic particles smaller than 5 mm, are ubiquitous environmental contaminants with documented presence in urban, rural, marine, remote, and polar atmospheres. The atmosphere serves as a primary medium for their long-range transport, raising concerns regarding climate interactions and human health. This review synthesizes recent advances in atmospheric MPs research, encompassing sampling strategies, pretreatment protocols, analytical techniques, occurrence characteristics, and ecological ramifications. Passive and active sampling methods are delineated, with active samplers enabling quantitative flux measurements. Pretreatment typically involves sequential steps of sieving, density separation, digestion, staining, and filtration to isolate MPs from complex matrices. Identification relies on visual inspection, micro-Fourier transform infrared spectroscopy (μ-FTIR), micro-Raman spectroscopy, laser direct infrared imaging (LDIR), and mass spectrometry. Reported atmospheric MPs predominantly exhibit dimensions below 700 μm, with fibrous morphologies being most prevalent. Color distribution is dominated by black, followed by white and transparent particles. Over 20 polymer types have been identified, with textiles, tire wear, and dust identified as principal sources. Atmospheric MPs can influence solar radiation balance, cloud formation processes, and pose risks to flora, fauna, and human health. However, research remains nascent; standardization of sampling and analytical protocols, along with comprehensive toxicological assessments, are critical knowledge gaps requiring urgent attention.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4045-x
The release of radioactive iodine from nuclear accidents and nuclear medicine poses significant environmental and health risks. Here, we report the design and synthesis of two cross-linked macrocycle-based porous organic polymers (P1 and P2) with different functionalities for efficient and rapid capture of radioactive iodine. P1 achieves complete iodine adsorption within 5 minutes, with an exceptional adsorption rate constant (k_obs) of 18.92 g g−1 min−1 (8.24 g g−1 min−1 for P2), representing a record-high iodine removal rate among state-of-the-art porous organic polymers. P1 demonstrates superior iodine adsorption efficacy in dynamic flow-through experiments, achieving a remarkable efficiency of 96.4% for radioactive 131I removal, greatly minimizing radiation contamination. Experimental and modelling techniques reveal that the superior iodine adsorption performance originates from electron-rich functional groups, hydrophobic surface, and porous structure of P1, thus exhibiting remarkable iodine capture capabilities through charge transfer, halogen bonding, and hydrophobic effects. The adsorbents show excellent stability and performance under complex and harsh conditions (pH 2–10) and can be easily regenerated, confirming their excellent reusability and potential for practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4222-9
The proliferation of high-frequency communication technologies has escalated electromagnetic (EM) pollution, posing risks to health and device reliability. Conventional microwave absorbers dissipate EM energy as heat, creating thermal management burdens and energy waste. This study introduces Bi2Se3 nanosheets, a topological insulator with surface conductivity and internal insulation, as a dual-functional material capable of both microwave absorption and thermoelectric conversion. Nanosheets with controlled morphology were synthesized via a polyol reduction method, with thickness and lateral size tuned by preparation conditions. The resulting composites exhibited excellent microwave absorption, achieving a broad absorption bandwidth of 2.95 GHz at sub-millimeter thickness. A multilayered structure design enabled full-band absorption from 2 to 18 GHz using a single absorbent. The Seebeck coefficient, derived from temperature differences up to 110 °C, was -152 μV/K, indicating efficient conversion of absorbed EM energy into electrical energy. This work demonstrates the potential of Bi2Se3 nanomaterials for self-powered electromagnetic devices, addressing both EM pollution and energy supply challenges.