SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4467-x
Conventional eye-movement interaction systems depend on video capture, infrared tracking, and image recognition, which impose inherent constraints on accuracy, response latency, and stability. This study introduces an eyelash-guided signal interaction system based on a triboelectric nanogenerator (PF-TENG) using PDMS-FDTS thin films. The system employs eyelash movements as interactive inputs, eliminating the need for complex optical acquisition devices. A CNN-LSTM hybrid neural network classifies distinct eyelash movement patterns with a classification accuracy exceeding 98.5%. The PF-TENG device exhibits ultra-flexibility and transparency, enabling seamless integration onto eyeglasses without obstructing the user's field of view. Experimental validation demonstrates real-time monitoring of ocular states for driving fatigue detection, accurately identifying fatigue signs and enhancing application potential in intelligent driving. The system offers a natural, comfortable input modality and significant advantages for human-machine interaction, with broad prospects in eye-movement control and intelligent transportation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4309-8
Iridium-doped cobalt oxide nanosheets derived from a ZIF template were evaluated as oxygen evolution reaction (OER) catalysts for proton exchange membrane water electrolysis (PEMWE). Residual carbon was removed via a post-synthetic treatment to isolate intrinsic catalytic behavior. The Ir0.23Co0.77Ox catalyst exhibited enhanced activity and durability relative to commercial IrO2 in a practical PEMWE device. Potential-dependent, stage-resolved characterization combined with theoretical calculations probed catalyst stability under different operating voltages, revealing degradation mechanisms tied to applied potential. Contact angle measurements showed that the Ir0.23Co0.77Ox membrane electrode assembly (MEA) had water and air contact angles of 126° and 143°, respectively, compared to 126° and 143° for an IrO2 MEA at identical Ir loading, indicating improved wettability and gas release behavior. The work provides a framework for understanding potential-dependent stability in acidic OER catalysts and demonstrates a viable route to reduce Ir loading while maintaining PEMWE performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4238-2
Infrared nonlinear optical (IR NLO) materials are critical for laser frequency conversion, yet their performance is often constrained by a trade-off between second harmonic generation (SHG) efficiency and laser-induced damage threshold (LIDT). Here, we report a new ternary diamond-like compound, AlGaS3, which successfully balances these competing demands. AlGaS3 crystallizes in a noncentrosymmetric structure composed of wide HOMO-LUMO gap [AlS4] tetrahedra and NLO-active [GaS4] tetrahedra. The compound exhibits a wide experimental optical band gap of approximately 3.38 eV, which is significantly larger than that of the benchmark AgGaS2 (AGS, ~2.70 eV). This wide band gap contributes to a high laser-induced damage threshold (LIDT) of approximately 6.0 times that of AGS, as determined by powder-based measurements. Notably, AlGaS3 also demonstrates a phase-matching SHG response of approximately 0.5 times that of AGS at a fundamental wavelength of 2.09 μm, with particle size-dependent behavior confirming phase-matchability. The combination of wide band gap, high LIDT, and moderate SHG response positions AlGaS3 as a promising candidate for high-power IR NLO applications. This work provides a viable strategy for designing IR NLO materials with enhanced laser damage resistance by incorporating wide-gap tetrahedral units.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4261-2
Developing ion exchange membranes with both high proton conductivity and high selectivity is crucial for vanadium redox flow batteries (VRFBs). Commercial Nafion membranes suffer from severe vanadium crossover, while conventional additives often aggregate, disrupting ion domains and significantly reducing proton conductivity. To overcome this conductivity–selectivity trade-off, we propose a modification strategy based on molecular-level functional strategy. Two complementary additives, polyvinylpyrrolidone (PVP) and a fluoroalkyl-grafted polyoxometalate cluster (8FSiW11), are introduced into Nafion matrix to achieve precise, cooperative, regulation of ionic domains. PVP fills ion domains via hydrogen bonding and electrostatic interactions, constructing an efficient barrier against vanadium ions. Simultaneously, 8FSiW11 anchors at the hydrophilic/hydrophobic interface, providing additional proton sources and hopping sites to compensate for proton neutralization by PVP. The resulting hybrid membrane exhibits a proton/vanadium selectivity of 1×10^6 S min cm^-3, 8.6 times higher than commercial Nafion 212 (NR212), and enables VRFB energy efficiencies (EE) of 88.9% at 100 mA cm^-2 and 83.2% at 200 mA cm^-2. This work demonstrates the potential of synergistic molecular modification strategy to break conductivity–selectivity trade-off in membrane design for next-generation high-performance VRFBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4302-9
The pre-deposited lead iodide (PbI2) film in two-step inverted perovskite solar cells (PSCs) often exhibits a dense structure, which impedes the diffusion and reaction of organic ammonium salts, leading to unreacted PbI2 residues and compromised device performance. To address this, 2,4-oxazolidinedione (OD) is introduced as a molecule additive into the PbI2 precursor solution. Owing to its stronger coordination with PbI2, OD effectively modulates its crystallization behavior, resulting in a porous structure. This porous structure significantly facilitates the diffusion and infiltration of organic ammonium salts, thereby minimizing PbI2 residue and enhancing the completeness of the perovskite conversion. Furthermore, OD and the constructed porous network jointly retard the crystallization kinetics of perovskite, promoting the formation of perovskite films with improved crystallinity and preferred crystal orientation. Therefore, the optimized PSCs achieve a power conversion efficiency (PCE) of 26.31%, and demonstrate excellent operational stability, retaining 90.24% of initial PCE for 1500 h at 25°C and 90.47% after 1000 h at 65°C. The champion device exhibits a VOC of 1.197 V, a JSC of 26.28 mA cm-2, and an FF of 83.58%, with negligible hysteresis. This study presents a straightforward yet effective approach to advancing the performance and stability of inverted PSCs fabricated via the two-step method.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4339-7
Neuromorphic computing demands energy-efficient synaptic devices that emulate biological plasticity. Optoelectronic memristors based on colloidal quantum dots (QDs) offer tunable bandgaps and solution processability, yet suffer from defect-mediated nonradiative recombination and instability. Here, we report ZnS-passivated CdZnSe core/shell QDs as the active layer in memristive devices, achieving enhanced synaptic emulation and information encryption. Time-resolved photoluminescence (TRPL) decay curves were fitted with a tri-exponential function, revealing that ZnS passivation suppresses defect-related trap states, prolonging the average carrier lifetime from 12.3 ns (CdZnSe) to 28.7 ns (CdZnSe/ZnS). The intensity proportion of the fast decay component (τ1 ≈ 1.2 ns) decreased from 45% to 18%, indicating reduced surface trapping. Devices incorporating CdZnSe/ZnS QDs exhibit stable bipolar resistive switching with an ON/OFF ratio exceeding 10^3, endurance of >10^3 cycles, and retention of >10^4 s. Under 365 nm UV illumination, the devices show light-tunable synaptic plasticity, including paired-pulse facilitation (PPF) with a facilitation index of 180% at a 50 ms interval, and transition from short-term to long-term memory. The memristors successfully emulate essential synaptic functions and are employed in a simple encryption scheme, demonstrating the potential of defect-passivated QDs for secure neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4250-0
Shape memory polymer (SMP)-based transfer printing offers a promising route for heterogeneous integration of flexible electronics, yet non-contact release reliability remains a critical bottleneck. This study systematically investigates the influence of pickup heating modes—localized versus global—on the release yield and energy-delivery mechanisms through combined experiments and finite element simulations. The localized heating mode concentrates strain energy at the interface, enabling controlled chip ejection with high yield, whereas global heating dissipates energy, leading to release failure. Quantitative analysis reveals that localized heating achieves a release yield of 100% under optimized conditions, compared to near-zero for global heating. The ejection velocity under localized heating is higher, which may induce chip bouncing on the receiver substrate, affecting transfer accuracy; however, this can be mitigated by adjusting release gap and laser parameters. The findings establish a theoretical framework for energy pathway design, providing guidelines for achieving high-yield, accurate non-contact release in laser-induced transfer printing. This work advances the practical application of SMP-based transfer printing for micro-LED displays and flexible electronics, addressing a key manufacturing bottleneck.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3582-9
Perovskite quantum dots (PQDs) hold great potential for brain-like neuromorphic computing. However, the development of PQDs-based synaptic devices is hindered by interfacial defects and limited stability. Here, we demonstrate a high-performance Cs2AgBiBr6 QDs/organic single crystal heterojunction synaptic device, fabricated via a novel space-confined vertical growth technique combined with a polymer-free transfer process. Vertically grown organic single crystals enable superior carrier mobility and facilitate the formation of low-defect interfaces with PQDs. The heterojunction exhibits remarkable photosensitivity (7.22 × 10^5 at 425 nm) and detectivity (2.15 × 10^15 Jones), owing to the strong optical absorption of PQDs coupled with the superior charge transport characteristics of organic single crystals. Notably, the device achieves dual-functional light adaptation, emulating synaptic behaviour under blue light while exhibiting photo-switching under green/red light. This unique capability enables smart blue-light hazard protection. This work not only provides a versatile platform for high-performance PQDs-based synaptic devices but also advances the development of brain-inspired neuromorphic systems for next-generation computing and intelligent sensing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3503-9
This correction addresses an image misuse in the original publication (Sci China Mater, 2025, 68(6): 2095, DOI: 10.1007/s40843-025-3311-6). Specifically, a fluorescent image in Fig. 4d, depicting live/dead cells after treatment with MPDA@TMZ without laser irradiation, was erroneously presented. The corrected Fig. 4 is provided, and the authors confirm that the results and conclusions of the original paper remain unaffected. The correction ensures the integrity of the reported data, particularly the cell viability and apoptosis assays. The study focuses on mesoporous bowl-shaped polydopamine (MPDA) nanoparticles co-loaded with temozolomide (TMZ) and indocyanine green (ICG) for synergistic glioblastoma therapy. The corrected figure includes CLSM images of G422 cells after incubation with various formulations (ICG, sPDA@ICG, mPDA@ICG, MPDA@ICG), cell viability curves, quantitative fluorescence intensity, live/dead staining, and apoptosis quantification. Statistical significance is denoted as ****p < 0.01. The correction maintains the scientific validity of the findings, which demonstrate the potential of MPDA-based nanoplatforms for combined chemo-photothermal therapy.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60630-X
Chemical looping methane steam reforming (CL-MSR) enables sequential production of high-selectivity syngas and high-purity hydrogen via redox cycling, yet single iron-based oxygen carriers suffer from poor cycling stability, low reactivity, and sintering. This study modified Fe2O3/Al2O3 oxygen carriers with Cu, La, and Ce additives via dip-coating, and systematically characterized their physicochemical properties, reactivity, and hydrogen production performance. Results showed that spinel-phase CuFe2O4 exhibited higher reactivity than perovskite LaFeO3 and CeO2, promoting deeper reduction of Fe2O3. Fe58Cu2Al achieved an oxygen storage capacity of 6.5 mmol/g. During CH4 reaction, Fe58Cu2Al exhibited the highest oxygen loss of 12.1 g/100 g oxygen carrier, with syngas yield of 5.15 mmol/g—1.33 and 1.59 times that of Fe60Al. In hydrogen production, the 2% Cu-modified carrier yielded 5.13 mmol/g H2, 1.51 times that of pristine Fe60Al, with purity exceeding 98%. After ten cycles, H2 yield remained at 3.61 mmol/g, surpassing the single-cycle output of pristine Fe60Al (3.39 mmol/g), demonstrating superior dispersion and coking resistance. The study establishes Cu modification as an effective strategy to enhance reactivity and cyclic stability of iron-based oxygen carriers for CL-MSR hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509001
To address low nitrogen removal efficiency in wastewater treatment plant (WWTP) effluent due to insufficient carbon sources and weak reoxygenation in conventional constructed wetlands (CWs), a tidal flow-subsurface flow integrated CW using iron-loaded biochar (BC-TF) as substrate was developed, with zeolite-based CW as control. Simulated wastewater experiments, water quality monitoring, nitrification/denitrification intensity assays, and high-throughput sequencing were employed. Results showed that tidal flow operation significantly enhanced removal of total nitrogen (TN) and ammonia nitrogen (NH4+-N), and increased nitrification intensity. Addition of iron-loaded biochar significantly improved TN and nitrate nitrogen (NO3−-N) removal, with BC-TF achieving an average TN removal of 86.03%, significantly higher than other groups (P<0.001). Microbial analysis revealed Proteobacteria, Actinobacteria, and Bacteroidetes as key phyla; iron-loaded biochar increased microbial abundance and diversity in tidal flow wetlands, while tidal flow alone reduced bacterial diversity. Pilot-scale experiments confirmed that tidal flow increased dissolved oxygen and nitrogen removal. This study is the first to combine iron-loaded biochar with tidal flow-subsurface flow CWs, systematically revealing the synergistic nitrogen removal mechanism of 'iron-loaded biochar-tidal flow-microorganisms', clarifying the role of iron-nitrogen coupling, and validating engineering applicability via pilot tests. The combination enhances reoxygenation, supplements carbon sources, and optimizes microbial community structure, effectively improving deep nitrogen purification of WWTP effluent, providing technical reference for tailwater treatment.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60717-7
Alkali lignin, a high-volume byproduct from pulp and paper manufacturing and biomass refining, is a promising feedstock for aromatic hydrocarbon production in liquid fuels due to its high energy density and abundant aromatic moieties. However, its highly cross-linked polymeric structure hinders efficient valorization. This work investigates catalytic conversion of alkali lignin into bio-oil under in situ H2 supply from formic acid. A series of Ni-Mo/h-BN bimetallic catalysts with varied metal ratios were synthesized by impregnation and characterized by XPS, XRD, and other techniques. The effects of reaction parameters on H2 production via aqueous-phase reforming (APR) of formic acid were evaluated. Optimal H2 yield was achieved at a formic acid-to-water molar ratio of 1:10 and a Ni/Mo atomic ratio of 3:1. H2 yield increased monotonically with temperature from 220 to 280 °C, reaching a maximum of 38.48 mmol. Subsequently, influences of reaction temperature and residence time on bio-oil production were examined. The highest heavy bio-oil yield (18.93%) and maximum relative content of aromatic hydrocarbons (13.81%) were both achieved at 280 °C. Prolonged reaction time reduced heavy bio-oil yield and aromatic hydrocarbon abundance while favoring furan derivatives. This work demonstrates good synergy between in situ hydrogen generation from formic acid and lignin hydrogenation in the temperature range 240–280 °C.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4143-9
High-Ni (Ni ≥ 0.9) layered cathodes are being developed to endure high-voltage operations above 4.5 V to boost energy density. However, they face exacerbated chemo-mechanical and electrochemical degradation under high-voltage operation, primarily due to excessive lattice strain and phase distortion during cycling. Here, we engineer a high-Ni, Co-free cathode featuring a multicomponent complex doping-modulated bulk structure, coupled with surface modification via a multifunctional atomic layer deposition-coated LiAlO2 layer. Such a unique framework achieved by surface-to-bulk integrated modification can not only greatly prevent lattice stress-induced mechanical degradation but also effectively mitigate the accumulation of by-products due to surface side-reactions. Moreover, the LiAlO2 nanoshell with exceptional ion conductivity markedly enhances the sur-/interfacial Li-ion migration kinetics, thus rendering low electron/ion-diffusion resistance. The developed cathode breaks through existing voltage constraints without compromising on performance, achieving an exceptional balance between capacity and cycle stability during operation at 4.8 V. Notably, the pouch-type cells utilizing graphite and Li metal anodes demonstrate excellent cyclability under demanding conditions, even operating at high charging cut-off voltages of 4.5 and 4.6 V, respectively.