SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4412-y
GeTe-based thermoelectric materials are promising lead-free alternatives to PbTe, but their intrinsically high Ge vacancy concentration (~10^21 cm^-3) leads to excessive carrier density and degraded Seebeck coefficient. This study integrates resonant levels (RLs) via In doping and local van der Waals gaps via Sb/Bi alloying to decouple electron and phonon transport. The optimal composition Ge0.91Sb0.04Bi0.04In0.01Te exhibits a Seebeck coefficient of ~287.31 μV K^-1 at 323 K, more than double that of the In-free sample (~102.28 μV K^-1). The peak figure of merit zT reaches ~1.8 at 723 K, with an average zT of ~1.0 over 323–723 K. Vickers hardness is enhanced to ~224 HV, a ~93% improvement over pristine GeTe (~116 HV). X-ray diffraction reveals a structural evolution toward a pseudo-cubic phase with increasing In content, and the (202) peak shifts to lower angles, indicating lattice expansion. These results demonstrate that synergistic RLs and van der Waals gaps effectively optimize carrier concentration and suppress thermal conductivity, offering a viable route for high-performance, mechanically robust GeTe thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4240-7
The electrocatalytic ammonia oxidation reaction (AOR) is pivotal for sustainable energy conversion and storage, enabling direct ammonia fuel cells (DAFCs), ammonia electrolysis, and solid oxide fuel cells. This review critically examines recent advances in AOR catalysis, emphasizing active-site regulation, interfacial engineering, and device-oriented catalyst development. For noble-metal catalysts, optimizing adsorption and dehydrogenation of NHx intermediates while mitigating poisoning is essential for sustained activity. Non-noble-metal systems, particularly Ni-based catalysts, require precise control of reconstructed working-state phases such as NiOOH-like species to balance activity and selectivity. Interfacial engineering, including heterointerfaces, defect structures, and doped coordination environments, strongly influences the competition between AOR and oxygen evolution reaction (OER), as well as product branching toward N2 or oxygenated nitrogen species. The review underscores that catalyst optimization now extends beyond bulk composition to the precise regulation of the interfacial reaction microenvironment. Furthermore, practical device operation is governed by membrane/electrolyte compatibility, mass transport, ammonia crossover, thermal management, and long-term durability. Bridging fundamental catalyst studies with deployable ammonia energy technologies requires coordinated optimization from active materials to electrode architectures and full-device systems. This review provides a comprehensive framework for designing next-generation AOR catalysts and accelerating their integration into industrial energy systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3553-7
Gesture interaction has emerged as a highly effective interface for intelligent human-computer interaction, attributed to its intuitive interaction modality and multi-dimensional control capabilities. However, traditional gesture interaction devices often depend on predefined encoding rules, which substantially limit interaction efficiency and degrade user experience. This study introduces an innovative intelligent finger ring interaction system based on a triboelectric nanogenerator utilizing PDMS/SrTiO3 composite thin film (PS-TENG). The system maps freehand writing gestures directly to textual information input, thereby eliminating the need for complex gesture encoding schemes and offering a user-friendly, low-learning-curve input method. By integrating a deep learning model, the system achieves recognition accuracies of 98.21% for English letters, 96.87% for Arabic numerals, and 96.44% for Chinese characters. Furthermore, it supports secure and encrypted data transmission and enables wireless interaction for gaming control. These findings indicate that the intelligent finger ring interaction system possesses significant potential for practical applications in information input and wireless control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3706-3
Aprotic lithium-oxygen (Li-O2) batteries are severely limited by slow cathode reaction kinetics and large polarization. Herein, we design and prepare a Mott-Schottky catalyst by uniformly embedding ultrafine Ru nanoparticles on nitrogen-doped carbon (Ru@NC) nanoflakes to accelerate oxygen redox kinetics of Li-O2 batteries. The Mott-Schottky effect of Ru@NC drives spontaneous electron rearrangement in the NC matrix and induces a strong built-in electric field at heterointerfaces, which accelerates the activation and conversion of oxygen intermediates. The obtained Ru@NC possesses rich Mott-Schottky heterointerfaces and defective carbon structures, which provide extensive adsorption and nucleation sites. More importantly, Ru@NC manifests moderate affinity for the intermediate LiO2, inducing formation of unique nanosheet-like Li2O2 with low Li2O2/cathode interfacial impedance, which further enhances oxidation kinetics. These enable the Li-O2 battery with Ru@NC to deliver a remarkably reduced polarization of 0.89 V, superior rate performance, and prolonged lifespan of over 200 cycles. This work will provide valuable guidelines for engineering advanced electrocatalysts for high-performance Li-O2 batteries and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3652-2
Existing robotic end-effector gripping technologies often encounter challenges such as poor adaptability to environmental changes, incomplete deformation sensing, and insufficient adhesion stability, which can compromise operational safety and reliability. Here, we present the bio-inspired self-sensing suction cup, in which the core self-sensing capability is achieved by combining high-performance, laser-induced graphene/Ag NWs flexible sensors with a Wheatstone bridge design. The flexible sensors provide high sensitivity, while the Wheatstone bridge circuit enables accurate and stable detection of deformation during the gripping process. Integrated into the octopus-inspired suction cup, this system allows for real-time monitoring of deformation and adsorption stability. The self-sensing suction cup demonstrates good performance across a 0–25 kPa negative pressure range, with outstanding linearity (R2 = 0.993) and high sensitivity (GF = 10.436 kPa−1). Experimental results confirm that the suction cup can achieve stable adsorption under varying loads and enable real-time monitoring of the suction cup status during the gripping process. This design provides a promising solution for intelligent gripping systems, logistics, and object recognition in challenging environments.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024120203
Potassium permanganate (KMnO4) oxidation is a promising technology for organic pollutant removal in water due to its low cost and broad pH applicability. However, its moderate oxidation capacity results in slow degradation rates for refractory organic compounds. Carbon materials (CMs), known for their accessibility, stability, and environmental compatibility, have shown great potential in enhancing KMnO4 oxidation. This paper provides a comprehensive review of recent advancements on the enhancement of KMnO4 oxidation of organic pollutants by CMs. The performance and suitability of various CMs in improving KMnO4 oxidation were systematically compared. Additionally, two key mechanisms driving the degradation of organic pollutants in the KMnO4/CMs system were elucidated, along with a discussion on the recycling and regeneration of CMs. Finally, future research directions and development trends for this technology were outlined, aiming to offer insights to advance the practical application of KMnO4/CMs system in water treatment.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61100-6
Sodium-ion capacitors (SICs) are attractive for low-cost and safe energy storage, but their practical development is limited by sluggish Na+ storage kinetics and structural instability of anodes. Control of both bulk structure and surface chemistry can address these limitations. We report a heteroatom-rich porous carbon (HRPC) derived from spores via hydrothermal pretreatment, low-temperature carbonization, and acid-mediated functionalization. The optimized GLSHC-HNO3 anode exhibits hierarchical porosity and multi-element co-doping, enabling rapid ion/electron transport, improved electrolyte wettability, and abundant Na+ adsorption sites. Density functional theory calculations reveal distinct contributions of different heteroatom configurations to sodium adsorption. The HRPC anode delivers an ultrahigh reversible capacity of 446.1 mAh g−1 at 50 mA g−1, retains 237.3 mAh g−1 at 2 A g−1, and shows excellent cycling stability. A full SIC with a polyaniline-derived porous carbon cathode achieves an energy density of 114.4 Wh kg−1 at 290 W kg−1, 43.1 Wh kg−1 at 1450 W kg−1, and a maximum power density of 5800 W kg−1, with 84.3% capacity retention after 5000 cycles and nearly 100% Coulombic efficiency. This work establishes a scalable, sustainable route for converting biomass into high-value carbon anodes, providing a new pathway for high-performance sodium-ion energy storage.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605006
Military ecological and environmental protection is a critical component of national ecological and environmental protection. Military activities and operations, such as training and drills, weapons and equipment testing, and combat, are prone to triggering a series of ecological and environmental problems, including greenhouse gas emissions, deterioration of water resources and water quality, vegetation destruction, land degradation, and typical physical and chemical pollution, which have attracted extensive global attention. This study systematically analyzed the eco-environmental impacts of military activities on multiple environmental media (atmosphere, water, and soil) across different periods, and conducted pollution source tracing in multi-media and representative regions. It reviewed the current status of ecological and environmental protection technologies for the three major environmental media, i.e., atmosphere, water, and soil, and summarized the characteristics and constraints of military ecological and environmental research. Finally, it proposed the research trends and key development directions for military ecological and environmental protection from four dimensions: data monitoring and sharing, research and development of in-situ remediation technologies for military-civilian integrated combined pollution, green construction practices for military facilities, and optimization of management systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3899-9
Metal halide hybrids have emerged as a highly promising class of optoelectronic materials owing to their rich chemical and electronic diversity, high luminescence efficiency, and tunable photophysical properties. Incorporating chirality into these systems imparts pronounced circularly polarized luminescence (CPL) activity, creating new opportunities for advanced smart optoelectronic and spintronic applications. Although numerous reviews have been dedicated to CPL-active perovskites, their non-perovskite ionic counterparts have yet to be systematically and comprehensively reviewed. Given the rapid advancements in this burgeoning field, such a work is both timely and crucial to chart its future course. This review summarizes recent progress in non-perovskite ionic metal halide hybrids exhibiting CPL emission, highlighting four aspects: (1) the intrinsic correlations among different characterization techniques; (2) the strategic advantages of these materials for CPL applications; (3) methodologies for enhancing their CPL performance; (4) the prerequisites and mechanisms underlying CPL generation in achiral metal halide hybrids. Finally, we discuss their emerging applications in light-emitting devices, information encryption, anti-counterfeiting technologies, and scintillators, and provide perspectives on the remaining challenges and future directions in this rapidly evolving field.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510018
Scientific assessment and prediction of the stabilization process in aged municipal solid waste (MSW) landfills are critical for reliable risk evaluation and remediation decision-making. Existing methods often fail under data-scarce conditions and lack temporal predictive capability. This study establishes a 'spatial characterization–temporal prediction' framework to address these gaps. The methodology integrates grid-based sampling, laboratory analysis of biological stability indicators (AT4), and LandGEM model simulations to assess current stabilization states and predict completion timelines. Applied to a landfill in southwest China, results reveal significant spatial heterogeneity in waste stabilization, strongly correlated with waste age and influenced by leachate recirculation of membrane concentrate. None of the landfill zones had reached full stabilization; predicted times to completion were: Zone D (17 years), Zone C (13 years), Zone B (8 years), and Zone A (1 year). Based on these findings, a systematic management strategy is proposed, including zoned gradient management, targeted control of lag zones, and dynamic planning. This study provides a theoretical basis for site-specific management and serves as a reference for similar landfills.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3929-4
Hydrogels are extensively utilized in biomedical fields such as drug delivery, tissue engineering, and wound dressings due to their excellent biocompatibility, high water content, and tunable physicochemical properties. However, conventional hydrogels often undergo uncontrolled swelling in physiological environments, leading to mechanical degradation, structural destabilization, and functional failure, which severely restricts their long-term applicability. Recent advances have focused on developing anti-swelling hydrogels with equilibrium swelling ratios typically below 150%, achieved through strategies including the introduction of hydrophobic interactions, enhancement of cross-linking density, and incorporation of nanocomposite structures. These approaches significantly improve dimensional stability and mechanical integrity under physiological conditions. This review systematically summarizes the common preparation strategies for anti-swelling hydrogels and highlights their latest progress in biomedical applications, including wound dressings, tissue adhesives, and implantable devices. The advantages and future directions, such as smart responsiveness and multifunctional integration, are critically discussed. The review aims to provide theoretical guidance and technical references for the development of next-generation high-performance medical hydrogel materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4012-4
Stimuli-responsive fluorescent hydrogels, owing to their tunable optical properties and unique smart response characteristics, have significant potential in encryption applications and information security. However, most current systems are limited to single-stimulus responsiveness and lack the capability for programmable information erasure or multi-modal dynamic synergy. Hence, we propose a multi-stimuli-responsive phase-change hydrogel incorporating aggregation-induced emission hydrophobic carbon dots (AIE-HCDs) and polyethylene glycol (PEG)-cellulose network, demonstrating dynamic fluorescence chromism under various external triggers. The hydrogel exhibits solvent-exchange-triggered fluorescence color changes from blue to red, enabled by the concentration modulation of AIE-HCDs through the exchange between PEG and water. Additionally, the temperature-induced phase transition of PEG from crystalline to molten state modulates the aggregation and dispersion of AIE-HCDs, thereby enabling dynamic fluorescence color changes. The phase transition further confers excellent shape-memory behavior and adjustable mechanical properties, with the tensile modulus varying from 6.28 MPa in the molten state to 36.23 MPa in the crystalline state, while maintaining high transparency (~88% in the molten state). By utilizing micro-contact printing and the multi-stimulus response, an encryption platform enables information to be hidden, selectively read under sequential stimuli (thermal, UV, and solvent), and completely erased upon demand. This strategy demonstrates significant potential for advancing high-level information encryption and anti-counterfeiting technologies.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511095
To address the low temporal resolution of conventional monthly dustfall monitoring and the lack of component information, this study proposed a daily dustfall measurement method that adds a filtration step to the Chinese standard method, referencing international standards. Using a sand-core filtration device with quartz or mixed cellulose ester membranes, the method achieved a spiked recovery of 101.1% ± 1.2%, good parallelism (y = 0.95x + 0.28), and satisfactory temporal closure. During autumn–winter (November 2020 to March 2021) at a representative site in Xicheng District, Beijing, daily dustfall ranged from 0.06 to 2.33 t·(km²·d)−1. Days with daily dustfall exceeding 0.7 t·(km²·d)−1 accounted for only 4% of the sampling days but contributed 25% of the total dustfall, with high values mainly occurring in January, March, and December. The insoluble fraction averaged 83% ± 12%, and a logarithmic model (y = 9.36ln(x) + 99.98) was established to estimate the insoluble proportion from insoluble dustfall (x, ≤1.00). Daily dustfall showed a strong positive correlation with average wind speed, and an exponential prediction model (y = 0.06e0.61x) was derived. Windy conditions (≥3 on the Beaufort scale) significantly amplified dustfall. The study recommends suspending earthwork, covering bare ground, and increasing watering frequency during high-wind alerts to mitigate dust pollution. This work provides a reliable method for high-resolution dustfall monitoring and insights for targeted pollution control in urban core areas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4003-7
The escalating electromagnetic (EM) pollution necessitates the development of high-performance microwave absorbers (MAs) with integrated functionalities. However, it is still a difficult problem to integrate more related high performances into the designed MAs. Herein, a sustainable strategy was reported for fabricating three-dimensional (3D) porous magnetic Ni@C-anchored carbon foams (Ni@C/CFs) with abundant heterointerfaces and magnetic Ni@C nanoparticles using 3D porous chitosan foams and Ni-nitrilotriacetic acid chelate (Ni-NAC) as precursors. The modulation of carbonization temperature and concentration of Ni-NAC solution contributed to the tunable carbon graphitization, Ni crystallinity and magnetic Ni@C nanoparticles loading, which effectively improved their EM properties and EM wave absorption performances (EMWAPs). The optimized 3D porous magnetic Ni@C/CFs not only exhibited exceptional EMWAPs with a minimum reflection loss (RL min) of −27.58 dB and an ultra-wide effective absorption bandwidth (EAB) of 7.20 GHz, but also presented efficient thermal insulation and strong antibacterial activity (>95% inhibition against E. coli), which mainly originated from their excellent magnetic-dielectric synergies and unique 3D hierarchical porous structures. Consequently, this work delivers a coherent design strategy for next-generation multifunctional absorbers with potential applications in EM protection, thermal management, and adaptive stealth technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4070-2
A series of ~20 nm intermetallic Pd3Pb nanocubes with tunable surface Pb exposure were synthesized via a facile one-step solvothermal approach, providing an ideal system to investigate the way in which the surface configurations of Pb-rich (Pd3Pb/Pb), Pd-rich (Pd3Pb/Pd), and standard Pd3Pb nanocubes influence the CO2 reduction reaction (CO2RR) mainly through the ligand effect while excluding geometric influences. Electrochemical measurement results indicate that the Pd3Pb/Pb catalyst delivered outstanding C1+ selectivity, achieving a high Faradaic efficiency of 96.88% at −0.72 V (vs. RHE), significantly outperforming the Pd3Pb/Pd (39.86%) and standard Pd3Pb (81.75%) counterparts. In situ FTIR together with DFT calculations further elucidated that Pb incorporation can modulate the electronic structure of Pd via p-d hybridization, leading to the upshift of the d-band center. This will, in return, strengthen the intermediate adsorption ability and lower the energy barriers of the C1+ pathways while effectively suppressing the competing hydrogen evolution reaction. This work establishes a precise surface engineering paradigm of intermetallic nanocrystals for designing high-performance electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4103-8
The industrial production of urea through the integrated Haber–Bosch and Bosch–Meiser processes involves high energy consumption and significant CO2 emissions. Given the persistent technical challenges inherent in direct electrocatalytic methods, catalytic systems that enable the thermal coupling of N2 and CO2 under mild conditions represent a promising and sustainable approach to urea synthesis. Herein, we designed MXene-based bimetallic single-cluster catalysts, M1Ru3@Mo2CO2, in which the M1Ru3 cluster is stably anchored on the Mo2CO2 support. Using density functional theory calculations, we systematically evaluated the structural stability and adsorption capabilities of 3d transition metal variants (M = Sc to Zn) toward N2, CO2, and H2. The results demonstrate that Co1Ru3@Mo2CO2 exhibits excellent thermodynamic stability and enables the synergistic activation of N2, CO2, and H2, fulfilling the prerequisite conditions for catalyzing the direct coupling of N2 and CO2 to form urea. Further analysis reveals that Co1Ru3@Mo2CO2 efficiently promotes the direct thermal coupling of N–C into urea under mild conditions via the associative pathway, with the rate-determining step corresponding to the conversion of *NHNH2 → *NH2NH2 with the low energy barrier of 1.16 eV. Under realistic conditions of 780 K and 29 bar, the calculated turnover frequency reaches 1.01 × 10−3 s−1 site−1. The high catalytic performance arises from the ability of the Co1Ru3 bimetallic cluster to precisely modulate charge transfer between support and reaction intermediates. Moreover, the in situ generated NH2 species acts as an autocatalyst for CO2 hydrogenation, while the cluster selectively enhances the electrophilicity of the *CO intermediate, thereby facilitating the nucleophilic attack by *NH2 and ensuring efficient C–N bond formation. The finding of the outstanding performance of Co1Ru3@Mo2CO2 single cluster catalysts could bypass the energy-intensive NH3 synthesis step, reduce overall energy demand, and remain compatible with existing urea production infrastructure, thereby offering significant scientific and technological significance.