SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4391-5
Self-assembled monolayers (SAMs) enable precise tuning of the ITO/active layer interfacial dipole, yet their impact on the crystallization kinetics of the overlying active layer remains poorly understood, limiting their potential in high-efficiency organic solar cells. This study introduces THPC, a self-assembling material with an extended carbazole core and heteroatom substitution, as a hole transport layer (HTL). Unlike the hydrophilic PEDOT:PSS, THPC exhibits low surface energy, providing a favorable template that extends the film formation kinetics of the PM6:L8-BO-X blend by nearly 1.4 times, mitigating the explosive nucleation prevalent in PM6-based active layers. This promotes a highly ordered fibrous morphology and enhances vertical phase separation. The deep work function of THPC (5.32 eV) increases the built-in potential, reduces interfacial trap density, and facilitates charge extraction. Consequently, non-radiative recombination loss decreases from 0.243 eV to 0.227 eV, and the open-circuit voltage rises from 0.866 V to 0.883 V, yielding a power conversion efficiency (PCE) of 20.19%, outperforming the PEDOT:PSS control (18.67%). This finding is confirmed across multiple Y-series acceptors, all approaching 20% PCE. Notably, the D18:L8-BO system achieves a PCE of 20.55%, demonstrating broad applicability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4420-7
Cu2-xSe is a leading p-type thermoelectric material owing to its phonon-liquid electron-crystal (PLEC) behavior, yet the atomic-scale mechanisms governing Cu+ migration remain unresolved. This study employs in situ high-resolution neutron diffraction coupled with maximum entropy method (MEM) analysis to map the temperature-dependent evolution of Cu+ nuclear density in β-Cu2Se and β-Cu1.95Se. At 398–423 K, intra-tetrahedral Cu 8c ↔ 32f <111> hopping emerges, with isosurface values of 0.505 fm Å-3 for β-Cu2Se and 0.484 fm Å-3 for β-Cu1.95Se. Above 448 K, inter-tetrahedral pathways form via Cu 32f ↔ 32f <100> or 32f ↔ 4b ↔ 32f <111> migration, as revealed by line scans along [1̅11̅] up to 723 K. The presence of Cu vacancies (x = 0.05) alters the onset and connectivity of these pathways, directly impacting phonon scattering and electron transport. These findings establish a structural basis for controlling Cu+ mobility, offering a rational route to mitigate Cu precipitation and enhance zT stability beyond 1.5 at 900 K. The work bridges microstructural dynamics and thermoelectric performance, providing critical guidance for defect engineering in superionic thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4313-7
Liquid-to-vapor mass transfer is central to energy and environmental processes. Conventional distillation relies on vapor-liquid equilibrium and device-level optimization, with materials playing passive structural roles. Non-boiling processes such as membrane distillation and interfacial solar evaporation localize phase change at confined interfaces, making mass transfer a materials-mediated transport phenomenon where interfacial structure and chemistry dictate evaporation kinetics, vapor escape, and solute rejection. Janus interface materials, featuring spatially separated hydrophilic and hydrophobic domains, introduce architectural asymmetry to regulate liquid-to-vapor mass transfer. This review summarizes recent advances, highlighting mechanisms including the cooperative pump-valve effect, nanoconfinement-enhanced transport, and mitigation of fouling and scaling. Representative applications in membrane distillation, solar-driven evaporation, and personal thermal-moisture management are systematically discussed. Key challenges and future opportunities are outlined, particularly in advancing fundamental understanding, scalable fabrication, and practical implementation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3694-3
Lithium metal anodes (LMAs) are among the most promising candidates for next-generation batteries with high energy density. However, their practical application is hindered by persistent challenges such as dendritic lithium growth, unstable solid electrolyte interphases (SEI), and poor Coulombic efficiency. Surface coating has emerged as a viable solution to address these limitations. In particular, atomic and molecular layer deposition (ALD/MLD) techniques offer unparalleled control over the fabrication of ultrathin, conformal coatings, making them especially suitable for stabilizing LMA interfaces. This review comprehensively summarizes recent progress in applying ALD and MLD methodologies to construct durable artificial interphases on LMAs. We discuss the underlying mechanisms through which these coatings inhibit dendrite formation, improve interfacial integrity, and facilitate uniform lithium-ion transport. The roles of inorganic ALD coatings, organic MLD coatings, and their organic–inorganic hybrids are systematically examined, with a focus on their chemical composition, deposition behavior, and electrochemical characteristics. Moreover, we highlight the enhanced performance achieved through the integration of ALD/MLD-engineered interfaces in full-cell systems. The review concludes with a discussion of current challenges and potential research avenues aimed at advancing the rational development of effective LMA protection strategies. Overall, this work offers valuable insights into the role of interfacial engineering via ALD and MLD in enabling the practical deployment of lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3695-8
Sulfur-based lithium-ion batteries, particularly those employing sulfurized poly(acrylonitrile) (SPAN) cathodes and graphite (Gr) anodes, offer high theoretical capacity and low cost but suffer from temperature-dependent capacity decay. This study systematically investigates the electrochemical dynamics and capacity decay mechanism of SPAN||Gr pouch cells cycled at 25–55 °C. Multiscale analyses reveal that capacity fade arises from active lithium loss and increased resistance, both accelerated by higher temperatures. Active lithium loss is primarily attributed to dead lithium formation and thickening of the solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), while resistance increase is predominantly due to SEI/CEI thickening. As temperature rises, active lithium loss becomes the dominant decay factor. Leveraging the consistent decay mechanism across temperatures, an accelerated aging model based on the Arrhenius equation is developed: y = 0.9x + a. This model accurately predicts cycling parameters at specific temperatures and reduces testing time by 50% when extrapolating from 55 °C to 25 °C. These insights provide critical guidance for developing long-life sulfur-based batteries for practical energy storage applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3684-4
The efficient conversion of dinitrogen (N2) to ammonia (NH3) under mild conditions remains a critical challenge for sustainable nitrogen fixation. This study reports a rationally designed ternary heterojunction, GO/MXene/UiO-66 (GM/UiO-66), which achieves directed charge transfer for enhanced photocatalytic nitrogen fixation. The internal electric field at the heterointerface drives anisotropic migration of photogenerated charges, leading to rapid separation of electron–hole pairs and suppression of interfacial recombination. The intrinsic defect structure of graphene oxide (GO) provides active sites for N2 adsorption and activation, while π–π interactions between GO and UiO-66 accelerate electron transfer. Additionally, the Schottky junction between UiO-66 and MXene facilitates hole (h+) transfer. The incorporation of GO and MXene extends visible-light absorption of UiO-66. Under simulated solar illumination, GM/UiO-66 exhibits an NH3 generation rate of 25.1 μmol g−1 h−1, which is 1.9 times higher than that of pristine UiO-66 (13.5 μmol g−1 h−1). This work presents a novel strategy for designing ternary heterojunction composites that optimize charge transfer and significantly improve photocatalytic performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3819-7
Selective solar-driven aerobic oxidation of biomass derivatives into valuable chemicals under ambient conditions is pivotal for sustainable chemical manufacturing but faces challenges from the conflict between O2 activation kinetics and selective C–H bond cleavage. This work demonstrates a spatial decoupling strategy in a precisely-engineered 2D/2D g-C3N4/ZnIn2S4 architecture, where ZnIn2S4 domains selectively activate O2, while adjacent g-C3N4 modulates electron transfer to O2 and tailors 5-hydroxymethylfurfural (HMF) binding configuration for selective C–H bond cleavage. This enables efficient selective conversion of HMF to 2,5-diformylfuran (DFF) via ambient aerobic photooxidation. When used alone, ZnIn2S4 produces mixed reactive oxygen species (·O2−/·OH) due to uncontrolled electron transfer during O2 activation. In-situ spectroscopy, Kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations demonstrate that the 2D/2D heterojunction, driven by its directed electric field, selectively activates O2 into ·O2− at ZnIn2S4 domains while suppressing ·OH generation by moderate electron transfer, mitigating over-oxidation. Adjacent g-C3N4 domains precisely anchor HMF via –OH group interactions, steering selective DFF formation. This spatial decoupling achieves a remarkable HMF-to-DFF photo-conversion rate of 1517.5 μmol g−1 h−1 with 99.4% selectivity under ambient air, outperforming many reported state-of-the-art catalysts and maintaining durable cycling performance. The work establishes a spatial decoupling principle to overcome O2 activation kinetics and site competition thermodynamics, paving the way for advanced catalyst design for sustainable energy and the environment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030501
Coastal areas serve as critical ecological interfaces for the migration of terrestrial microplastics (MPs) into the ocean, and characterizing their pollution is essential for integrated coastal management. This study investigated the occurrence, sources, and ecological risks of MPs in surface waters of nearshore areas and river estuaries around Hainan Island, a typical tropical tourist island. MPs abundance ranged from 316.67 to 1300 n·m−3 in seawater and from 400 to 5416.67 n·m−3 in river water. In seawater, the dominant polymer was polyethylene terephthalate, with fibers being the predominant shape, size class 500–1000 μm, and white/transparent color. In river water, polypropylene-ethylene copolymer dominated, also as fibers, but with size class 100–500 μm and white/transparent color. Seawater MP abundance showed a significant positive correlation with tourist numbers, and distribution across functional areas followed: tourism areas > natural areas > aquaculture areas > residential areas. Multiple correspondence analysis identified household plastic waste, laundry wastewater, aquaculture, and fishery products as primary sources of seawater MPs. Principal component analysis indicated homologous characteristics between seawater and river MPs, suggesting rivers are a major pathway for terrestrial MP transport to coastal zones. Ecological risk assessment revealed low pollution loads, with potential ecological risks moderate for seawater and medium-low for river water. Notably, 15% of seawater sampling sites exhibited polymer risk level Ⅳ, primarily driven by polyacrylonitrile's high biological toxicity. These findings provide a scientific basis for developing MP pollution control strategies in Hainan Island.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511002
To treat large-air-volume, low-concentration volatile organic compounds (VOCs) containing tetrachloroethylene (PCE) generated from rubber-metal bonding, this study systematically investigated the adsorption-desorption behavior and interaction mechanisms of PCE, toluene, and methyl isobutyl ketone (MIBK) on granular activated carbon (GAC). Static adsorption experiments showed that PCE adsorption capacity reached 556.6 mg·g−1, while dynamic multi-component adsorption capacity was 179.6 mg·g−1. Kinetic analysis indicated that PCE adsorption was controlled by both intraparticle diffusion and external surface adsorption, whereas toluene and MIBK were primarily intraparticle diffusion-limited. During high-temperature nitrogen desorption, PCE underwent dechlorination, hydrogenation, and recombination, producing trichloroethylene, 1,2-dichloroethane, 1,2-dichloropropane, and HCl, with HCl accounting for 3.61% of the chlorine molar content in adsorbed PCE. After four adsorption-desorption cycles, the iodine value of GAC dropped below the industry standard of 600 mg·g−1; however, water washing and alkali immersion extended the cycle life to 8 and 9 cycles, respectively. The HCl generation pattern in co-adsorption systems was consistent with single-PCE systems. A regeneration process combining alkali immersion and water washing was proposed and integrated into an engineering strategy. Compared to conventional activated carbon adsorption coupled with RTO incineration, the proposed classification strategy reduced annual costs by 49.5×10⁴ CNY. This work provides a cost-effective and safe solution for Cl-VOCs treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031901
The rapid expansion of the nuclear power industry has increased the demand for effective nuclear wastewater treatment, making the efficient removal of radioactive iodine isotopes (e.g., 131I, 129I) from aqueous environments a critical challenge. Covalent organic frameworks (COFs), a class of crystalline porous materials characterized by high specific surface area, tunable pore structures, and exceptional stability, exhibit significant potential for capturing radioactive iodine from water. This review systematically examines the adsorption mechanisms of iodine by COF materials, including electrostatic interactions, charge transfer, hydrogen bonding, and secondary mechanisms such as metal coordination, ion exchange, and van der Waals forces. The effects of COF pore structures on iodine removal efficacy are discussed with a focus on pore size and functional group modifications. Key research trends and prevailing challenges in the application of COFs for aqueous iodine capture are analyzed, including the need for selective adsorption in complex wastewater matrices and the scalability of COF synthesis. The review concludes with a perspective on future research directions, emphasizing the design of novel COFs with tailored pore chemistry and the development of cost-effective, regenerable adsorbents for practical deployment in nuclear wastewater treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032401
Diazepam (DZP), a benzodiazepine anxiolytic drug, has been a persistent contaminant in fishery water environments. In China, DZP is classified as a veterinary drug that must not be detected in animal-derived foods, yet it is frequently found in aquatic products, posing significant risks to ecological health and food safety. This review systematically summarizes the current pollution status of DZP in fishery water and its adverse effects on aquatic organisms, emphasizing its persistence in both water and aquatic products. The paper comprehensively examines advances in detection techniques, including gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS), as well as treatment technologies such as adsorption, photolysis, chemical oxidation, and biodegradation. Critical gaps remain in the integration of these technologies for practical remediation. The review underscores the urgent need for enhanced monitoring and risk assessment of DZP contamination, alongside the development of more efficient and scalable treatment methods. By consolidating current knowledge, this work provides technical support for aquatic organism protection and fishery water management, and serves as a reference for future research and technological innovation in this field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3915-8
Reactive oxygen species (ROS)-based antibiofilm therapy is limited by short ROS lifetime, restricted diffusion, and biofilm barriers. We designed a bacteria-targeted piezoelectric heterostructure (U-B/F) comprising boronic acid-functionalized UiO-66(Hf) (U-B) and carboxylated fullerene (C70-COOH). Boronic acid groups enable selective bacterial binding. Under ultrasound (US), the Z-scheme heterojunction enhances piezoelectric response and charge separation, amplifying sonocatalytic ROS generation. Fullerene acts as a peroxidase mimic, converting endogenous H2O2 into cytotoxic hydroxyl radicals (•OH). Additionally, favorable band alignment allows US-induced electron transfer from bacteria to U-B/F, disrupting bacterial electron transport and energy metabolism. Transcriptomic profiling confirmed bioenergetic collapse and oxidative stress. In vitro, U-B/F achieved 99.99% elimination of planktonic methicillin-resistant Staphylococcus aureus (MRSA) and 92.41% removal of mature biofilms. In MRSA-infected diabetic mice, U-B/F under US irradiation accelerated wound healing by eradicating infection, alleviating inflammation, and promoting tissue regeneration. This work provides a rational strategy for designing multifunctional nanomaterials integrating bacterial targeting, dual ROS catalysis, and electron transfer interference to combat biofilm-associated infections.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511095
To address the low temporal resolution of conventional monthly dustfall monitoring and the lack of component information, this study proposed a daily dustfall measurement method that adds a filtration step to the Chinese standard method, referencing international standards. Using a sand-core filtration device with quartz or mixed cellulose ester membranes, the method achieved a spiked recovery of 101.1% ± 1.2%, good parallelism (y = 0.95x + 0.28), and satisfactory temporal closure. During autumn–winter (November 2020 to March 2021) at a representative site in Xicheng District, Beijing, daily dustfall ranged from 0.06 to 2.33 t·(km²·d)−1. Days with daily dustfall exceeding 0.7 t·(km²·d)−1 accounted for only 4% of the sampling days but contributed 25% of the total dustfall, with high values mainly occurring in January, March, and December. The insoluble fraction averaged 83% ± 12%, and a logarithmic model (y = 9.36ln(x) + 99.98) was established to estimate the insoluble proportion from insoluble dustfall (x, ≤1.00). Daily dustfall showed a strong positive correlation with average wind speed, and an exponential prediction model (y = 0.06e0.61x) was derived. Windy conditions (≥3 on the Beaufort scale) significantly amplified dustfall. The study recommends suspending earthwork, covering bare ground, and increasing watering frequency during high-wind alerts to mitigate dust pollution. This work provides a reliable method for high-resolution dustfall monitoring and insights for targeted pollution control in urban core areas.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051404
Rubber additives, such as 1,3-diphenylguanidine (DPG) and p-phenylenediamine antioxidants (PPDs), are widely used in the rubber industry and have been increasingly detected in aquatic environments. This study investigated the distribution characteristics and potential sources of seven typical rubber additives (DPG, 6PPD, IPPD, DPPD, CPPD, DNPD, and 77PD) and the transformation product 6PPD-Q in surface water of the Guangzhou section of the Pearl River, China. A total of 29 sampling sites were analyzed. Total concentrations of the target compounds ranged from 205 to 5400 ng·L−1, with a mean of (820±1100) ng·L−1. DPG was the dominant compound in both dissolved and particle phases, accounting for (99±1.9)% and (66±13)% of the total concentrations, respectively. Source analysis indicated that aquaculture, vessel navigation, agricultural runoff, and wastewater treatment plant discharges likely influence the occurrence of rubber additives in this river section. Risk quotient (RQ) assessment revealed that 6PPD-Q posed high ecological risk at all sampling sites (RQ > 1), while DPG exhibited moderate to high risk at most sites (RQ > 0.1). In contrast, 6PPD, IPPD, CPPD, and DPPD showed low ecological risk. These findings highlight the need for heightened attention to the ecological risks posed by 6PPD-Q and DPG in the Pearl River Basin and provide scientific data for pollution prevention and risk management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3960-0
Dry electrode processing offers a solvent-free and scalable pathway toward high-energy lithium metal batteries (LMBs), yet its practical implementation is constrained by tortuous ion/electron transport and weak mechanical cohesion in ultra-thick electrodes. Here, we construct a carbon-coated NASICON-type Li1.3Al0.3Ti1.7(PO4)3 nanofiber network (LATP@C) that serves as an integrated ionic-electronic scaffold within dry-processed Ni-rich cathodes. The one-dimensional LATP@C fibers form a continuous 3D percolation architecture that couples fast Li+ conduction from the NASICON core with efficient electron transport through the conformal carbon shell. Their rough, oxygen-functionalized surfaces further enhance electrolyte affinity, while the mechanically robust fibrous network bridges NCM811 secondary particles, suppressing crack initiation and preserving structural integrity during cycling. Benefiting from these collective effects, the LATP@C cathode with 100 mg cm−2 loading delivers 203 mA h g−1 at 0.1 C and maintains 96.7% capacity over 35 cycles at 0.2 C. Pouch cells incorporating 60 mg cm−2 LATP@C cathodes retain 80.5% capacity after 50 cycles, highlighting the practical viability of this design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4082-6
High-performance nonvolatile memory devices are crucial for next-generation computing, yet achieving low-power, stable, and reproducible resistive switching remains challenging, primarily due to stochastic filament formation and limited precise control over the electronic properties of active materials. Herein, we employ a rational molecular engineering strategy to address these limitations by constructing a series of two-dimensional pyrene-based covalent organic frameworks (Py-COFs)—Py-H, Py-CH3, and Py-OH—via systematic substitution (–H, –CH3, and –OH) on the phenyl linkers to modulate backbone electronics. The electron-donating –CH3 and –OH motifs enrich the π-conjugated backbone with higher electron density, while the –OH moiety in Py-OH further engages in p-π conjugation with the benzene ring and forms intramolecular hydrogen bonds, thereby increasing framework rigidity, enhancing orbital overlap, and promoting charge delocalization. Enabled by these structural refinements, Py-OH-based devices exhibit markedly improved resistive switching behavior, characterized by a low operating voltage, an ON/OFF ratio of ~10^3.45, and excellent retention stability. Combined photophysical, electrochemical, and high-resolution TEM analyses corroborate that hydroxyl-driven p-π conjugation, hydrogen-bond reinforcement, and the emergent nanowire-like morphology synergistically suppress uncontrolled filament formation and promote efficient charge transport. These findings establish a clear structure-property correlation in functionalized Py-COFs and underscore their promise as tunable active layers for low-power, high-performance resistive memory and neuromorphic computing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4145-0
Conductive fibers face a fundamental trade-off between high electrical conductivity and substantial mechanical stretchability, which critically undermines their reliability under extreme or dynamic mechanical conditions. To overcome this challenge, we report a bio-inspired, hierarchically structured conductive fiber engineered by mimicking the parallel-fibril architecture and integrated matrix of skeletal muscle. This fiber is constructed from multiple parallel spandex yarns as the elastic core, a continuous liquid metal (LM) layer as the conductive pathway, and a composite waterborne polyurethane (WPU)/fluoropolymer (FP) sheath as the protective matrix. This unique architecture concurrently delivers exceptional stretchability (>3500%), high electrical conductivity (3.76 × 10^5 S m−1), and outstanding stability against water and mechanical abrasion. Leveraging its excellent conductivity and mechanical compliance, the fiber can be woven into textiles and function as a receiving coil for efficient wireless power transfer. Additionally, a twisted-pair capacitive strain sensor fabricated from this fiber demonstrates a broad, linear response up to 1000% strain. When integrated into garments, the sensor effectively monitors a wide range of physiological activities, from gross joint movements to subtle biological signals, including wrist pulse, vocal vibration, ballistocardiogram, and respiration. This work presents a conductive fiber that integrates high conductivity, ultra-stretchability, waterproofness, and long-term durability, offering a robust material platform and a scalable fabrication strategy for advancing all-weather health-monitoring systems, smart textiles, and next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4096-7
Hexagonal boron nitride (h-BN) nanomaterials exhibit exceptional properties but suffer from severe aggregation due to undesirable surface characteristics, limiting their application in polymer nanocomposites. Existing covalent functionalization methods often compromise between time efficiency, energy consumption, and structural integrity. This study presents a rapid, room-temperature catalytic grafting strategy using tris(pentafluorophenyl)borane (B(C6F5)3) to functionalize h-BN nanoflakes bearing edge hydroxyl groups. The reaction between B–OH groups and activated Si–H bonds of hydrosilanes proceeds under mild conditions, preserving the structural integrity of h-BN. Density functional theory (DFT) calculations confirm the catalytic feasibility and elucidate two possible reaction pathways: backside-attack and flank-attack mechanisms. The modified h-BN exhibits significantly improved dispersibility in low-polarity solvents and tunable surface properties. This efficient method offers a versatile platform for h-BN surface engineering, facilitating broader practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4208-8
Sodium-ion batteries (SIBs) are emerging as a cost-effective alternative to lithium-ion batteries due to the abundance of sodium resources. Among cathode materials, P2-type layered oxides (Na_xTMO_2) offer high ionic conductivity and rate capability but suffer from low initial sodium content and Na+/vacancy ordering, leading to structural degradation and capacity fading. This study proposes a synergistic strategy combining high sodium content with Li/Mg co-doping to enhance the cycling stability of P2-type cathodes. The high sodium content increases the sodium reservoir, reducing the depth of desodiation for a given capacity, while Li/Mg co-doping mitigates Na+/vacancy ordering and stabilizes the crystal structure. The optimized cathode exhibits significantly improved cycling performance, retaining 82.3% of its initial capacity after 500 cycles at 1C, compared to 65.4% for the undoped counterpart. Furthermore, the co-doped material demonstrates enhanced rate capability, delivering 112 mAh/g at 5C, and suppressed phase transitions, as evidenced by in-situ X-ray diffraction. This work provides a rational design pathway for high-performance P2-type cathodes, addressing key bottlenecks in SIB commercialization.