SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3432-8
This correction addresses an error in the labeling of author affiliations in the original publication (Sci China Mater, 2025, 68: 1561, DOI: 10.1007/s40843-024-3290-9). The corrected affiliations are as follows: Fuxia Huang, Feng Wang, Ya Liu, and Liejin Guo are affiliated with the International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Yifei Liu is affiliated with the School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. The correction was made upon the request of the authors and with approval from the respective institutions. The original article focused on crystal defects engineering of BiOI to enhance photocatalytic CO2 reduction to C2 products, a critical area for sustainable fuel synthesis. This correction ensures accurate attribution and institutional recognition, which is essential for research integrity and reproducibility. No changes were made to the scientific content or conclusions of the original study.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3610-7
Electrochemical CO2 reduction reaction (CO2RR) offers an attractive route to produce value-added multicarbon (C2+) products, yet suffers from competing hydrogen evolution and monocarbon production. Here, we propose a dual-confinement effect on CO2 reactant and *CO intermediate, induced by tuning the pore configuration of reconstructed covalent organic frameworks (RC-COFs). The highly crystalline microporous RC-COF-1, when coated on a Cu electrode, enhances local CO2 concentration and restricts CO diffusion, thereby promoting C-C coupling. In acidic electrolyte, the RC-COF-1@Cu electrode achieves a maximum C2+ Faradaic efficiency (FE) of 67.0% at 500 mA cm−2, while maintaining a total carbon product FE above 90% across a broad current density range (100–500 mA cm−2). Experimental and theoretical analyses confirm that the ordered micropores of RC-COF-1 modulate reactant adsorption and intermediate diffusion, leading to improved C2+ selectivity. This work underscores the critical role of COF pore architecture in microenvironment engineering for heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3780-3
Real-time health monitoring and ongoing evaluation of physiological conditions are becoming increasingly vital for the advancement of future medical diagnostics and personalized healthcare solutions. Given that certain illnesses necessitate prompt and accessible detection methods, wearable chemical sensors have garnered considerable interest for their capability to monitor health through physiological signals and chemical indicators. This review delivers a thorough examination of recent developments in four primary categories of wearable chemical sensors: biosensors, humidity sensors, gas sensors, and ion sensors. We explore the representative materials, device structures, operating mechanisms, and various application scenarios for each type of sensor. By investigating the latest innovations in these technologies, we aim to provide a detailed overview of the current research landscape, highlight existing challenges, and present potential future directions of wearable chemical sensors in healthcare monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3800-7
Two-dimensional van der Waals (vdW) crystals, stacked via atomically thin layers, exhibit rich functionalities and tunable stacking orders. Their mechanical behaviors are crucial for flexible and miniature electronics. While some vdW crystals show superior plasticity, the mechanical properties of SnS2 bulk crystals remain largely unexplored. Here, we synthesize high-quality SnS2 crystals via the Bridgman method and comprehensively investigate their mechanical properties. SnS2 bulk crystals exhibit remarkable plasticity and softness: bending and compression strains exceed 20% and 45%, respectively, without fracture, while tensile fracture strains reach up to ~12% (range 9%–16%). Scanning/transmission electron microscopy reveals multiple deformation units, including layer segments, interlayer/cross-layer slip, twisting, and twinning-like structures. These units provide multiple pathways to release strain energy, promoting plasticity. Alongside weak interlayer vdW interactions, relatively ionic and weak intralayer Sn–S bonds contribute to the softness. This work fills the knowledge gap on SnS2 mechanical properties, advancing its processing and application in diverse electronic devices. Further studies may focus on balancing plasticity and strength by tuning microstructure to activate but confine deformation units.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3913-3
The depletion of fossil resources necessitates the development of sustainable polymers from renewable feedstocks. Eugenol, a biomass-derived compound, serves as an ideal platform molecule due to its reactive allyl group and rigid aromatic scaffold. This study introduces a chiral Pd/Wei-Phos catalytic system for the helix-selective living polymerization of achiral eugenol-based diazo acetate monomer, delivering helical polycarbenes in high yield with controlled molecular weight (Mn), narrow dispersity (Đ), and optical activity. Post-polymerization functionalization was achieved via thiol-ene click chemistry, enabling efficient incorporation of diverse functional groups (carboxyl, ester, ketone, and diol) with high conversion (>99%). Additionally, an innovative pentaerythritol tetra(3-mercaptopropionic acid) (PETMP) cross-linked eugenol-based polycarbene system has been constructed. By controlling the polymerization degree and cross-linking density of the polymer, the mechanical properties (tensile strength can reach 15 MPa) of the cross-linked materials can be easily adjusted. Moreover, the cross-linked films exhibit excellent chiral separation ability and can be used for the enantioseparation of enantiomers of various chiral alcohols, with enantiomeric excess (ee) up to 96%. This not only contributes an innovative strategy for designing high-performance functional materials, but also provides inspiring ideas for the development of biomass-derived high-performance materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3892-2
Single-atom co-catalysts on semiconductor substrates offer a cost-efficient route to enhance photocatalytic performance with minimal precious metal loading. However, precise tuning of local coordination environments and construction of efficient single-atom co-catalysts remain challenging for overall water splitting. Here, we employ an icing-assisted photochemical reduction strategy to anchor atomically dispersed Pt species as hydrogen evolution co-catalysts on Al3+-doped SrTiO3 (Pt SA-STO). The optimized Pt SA-STO exhibits remarkable activity, with hydrogen and oxygen evolution rates of 13.62 and 6.71 mmol h−1 g−1, respectively, and a turnover frequency (TOF) of 2114.5 h−1. We pioneer the use of nuclear magnetic resonance (NMR) spectroscopy to quantitatively track the temporal evolution of Pt4+ to Pt2+ under continuous irradiation during the icing-assisted photoreduction. Advanced characterizations and theoretical calculations confirm that single-atom Pt co-catalysts facilitate directional transfer and extraction of photogenerated charge carriers, effectively suppressing surface recombination. This work provides insights into designing novel single-atom co-catalysts by deepening understanding of electronic configurations and active sites in photocatalytic overall water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3991-3
Ionic covalent organic frameworks (ICOFs), as an emerging subclass of covalent organic frameworks (COFs), have garnered significant attention owing to their unique integration of structural precision and ionic functionality. Although conventional neutral COFs possess excellent crystallinity, tunable porosity, and high stability, their limited electronic tunability and poor charge-transport properties have constrained their performance in various applications. The incorporation of ionic sites into COF skeletons or pore environments effectively overcomes these intrinsic limitations. The presence of charged centres enhances framework polarity, modulates local electrostatic fields, and facilitates efficient ion migration and charge separation, thereby endowing ICOFs with superior functionality. As a result, ICOFs have demonstrated remarkable potential in diverse fields, including adsorption, sensing, ion conduction, energy devices, photocatalysis, and electrocatalysis. This review provides an integrative perspective by systematically linking framework design, ionic site engineering, structure-property relationships, and functional performance in various applications, highlighting ICOFs distinct advantages over neutral COFs and providing fundamental insights for the rational design of next-generation ionic frameworks toward energy and environmental applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60717-7
Alkali lignin, a high-volume byproduct from pulp and paper manufacturing and biomass refining, is a promising feedstock for aromatic hydrocarbon production in liquid fuels due to its high energy density and abundant aromatic moieties. However, its highly cross-linked polymeric structure hinders efficient valorization. This work investigates catalytic conversion of alkali lignin into bio-oil under in situ H2 supply from formic acid. A series of Ni-Mo/h-BN bimetallic catalysts with varied metal ratios were synthesized by impregnation and characterized by XPS, XRD, and other techniques. The effects of reaction parameters on H2 production via aqueous-phase reforming (APR) of formic acid were evaluated. Optimal H2 yield was achieved at a formic acid-to-water molar ratio of 1:10 and a Ni/Mo atomic ratio of 3:1. H2 yield increased monotonically with temperature from 220 to 280 °C, reaching a maximum of 38.48 mmol. Subsequently, influences of reaction temperature and residence time on bio-oil production were examined. The highest heavy bio-oil yield (18.93%) and maximum relative content of aromatic hydrocarbons (13.81%) were both achieved at 280 °C. Prolonged reaction time reduced heavy bio-oil yield and aromatic hydrocarbon abundance while favoring furan derivatives. This work demonstrates good synergy between in situ hydrogen generation from formic acid and lignin hydrogenation in the temperature range 240–280 °C.