SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4340-0
Thin films with nonreciprocal circularly polarized luminescence (CPL) emit circularly polarized light with opposite handedness from its two opposite sides, holding great promise for advancing optical multiplexing technologies. Herein, we introduce component orientation mismatch into chiral composite films via stretching, which leads to macroscopic optical anisotropy and accordingly drives the films to show nonreciprocal CPL activity. Stretching triggers linear dichroism-linear birefringence (LD-LB) coupling to realize nonreciprocal circular dichroism (CD) in elastomer films consisting of thermoplastic polyurethane (TPU) and chiral polyacetylene (R/S-PSA). Moreover, fluorescence anisotropy-linear birefringence (f-LB) coupling occurs after introducing fluorescent groups into the films to achieve multi-color nonreciprocal CPL. The unstretched films exhibit reciprocal CPL with a luminescence dissymmetry factor (|glum|) of 10⁻¹, with handedness determined by PSA’s intrinsic helical chirality. In the stretched films, the oriented fluorescent groups undergo f-LB coupling with matrix crystallization, resulting in nonreciprocal CPL (|glum|=10⁻²). Based on this distinctive chiroptical feature, we have developed chiral logic gates, multidimensional optical encryption systems, and enantioselective photopolymerization platforms to demonstrate the potential uses of the as-obtained CPL films. This work provides both fundamental insights into and a versatile material platform for developing smart nonreciprocal photonic systems with advanced chiroptical functionality.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4213-x
Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3844-9
Global water scarcity and atmospheric pollution necessitate advanced remediation materials. Metal-organic frameworks (MOFs) offer high specific surface areas (up to 7000 m2 g−1), tunable pore sizes (0.3–4.0 nm), and abundant active sites, yet their application is hindered by agglomeration, poor recoverability, and structural fragility. Electrospinning embeds MOFs into polymeric nanofibers, yielding freestanding membranes with three-dimensionally interconnected porous networks that enhance dispersion, operational stability, and handling. This review systematically examines design strategies, mechanistic insights, and performance of electrospun MOF-based nanofibrous membranes for water purification (pharmaceutical residues, heavy metal ions, synthetic dyes, emulsified oils) and air purification (ultrafine particulate matter, volatile organic compounds), benchmarking against conventional counterparts. Recent progress in multifunctional synergistic systems, stimuli-responsive membranes, and enhanced environmental resistance is highlighted. Persistent challenges and future research directions are discussed to guide rational design of advanced MOF-integrated membrane technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3698-5
The oxygen evolution reaction (OER) is a critical bottleneck in next-generation sustainable energy systems due to its sluggish kinetics. Developing cost-effective, high-efficiency electrocatalysts requires understanding the dynamic structural evolution at electrode-electrolyte interfaces under operating conditions. In situ techniques are invaluable for identifying active centers and monitoring key intermediates. This review comprehensively summarizes recent advances in cutting-edge in situ methods for characterizing OER electrocatalyst structure evolution. It provides a brief overview of active motifs and robust structures using multiple in situ correlative techniques, establishing essential structure-performance relationships and updating mechanistic understanding at atomic scale under realistic conditions. Key challenges and perspectives are highlighted to promote rational design of promising electrocatalysts for efficient oxygen-associated electrocatalysis and electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3575-4
Halide perovskite memristors, known for their ion mobility, have emerged as strong candidates for computational units in next-generation memory and neuromorphic computing systems. Nevertheless, most memristors are limited to operating in a single mode, either resistive switching or threshold switching. In this work, we overcome this limitation by developing dual-mode α-formamidinium lead triiodide (α-FAPbI3) perovskite memristors with switchable volatile/nonvolatile states, enabled by engineered SnO2 electron transport layers (ETLs). Through molecular interface optimization using 3-(N,N′-dimethylmyristylammonio) propanesulfonate (Z14) and 4,4′-(1,10-phenanthroline-3,8-diyl)bis(N,N′-bis(4-methoxyphen-yl)aniline) (PNL), we achieved exceptional device stability. Volatile devices exhibited >500 switching cycles, while nonvolatile devices surpassed 1000 cycles, both maintaining a high on/off ratio (~10^3). Beyond memory applications, these devices successfully emulated biological functionalities. The volatile mode replicated four key nociceptor characteristics (threshold, relaxation, sensitization, and no adaptation), while the nonvolatile mode demonstrated advanced synaptic plasticity, including paired-pulse facilitation (PPF) and spike-timing-dependent plasticity (STDP). Capitalizing on this dual-mode synergy, we constructed a spiking neural network (SNN) for handwritten digit recognition, achieving a 93% accuracy rate—a significant milestone for perovskite-based neuromorphic systems. This study not only provides a material-level strategy for multifunctional memristor design but also bridges the gap between biological sensing and artificial intelligence, paving the way for adaptive neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607020
Kitchen waste (KW) and excess sludge (ES) are urban biowastes with resource recovery potential, commonly treated via anaerobic digestion (AD) for methane production. However, KW mono-digestion suffers from acidification, while ES yields low methane. This study employed semi-continuous reactors to simulate practical AD, co-digesting KW and ES at a 4:1 volatile solids ratio with biochar addition (0.5, 1.0, 2.5, 5.0, 10.0 g/L). The optimal biochar dosage was 2.5 g/L, achieving cumulative biogas and methane volumes of 17.53 L and 11.63 L, respectively, representing 42.10% and 39.47% increases over the biochar-free control, and 34.45% and 43.30% enhancements relative to thermally hydrolyzed sludge. The methanogenic lag phase decreased from (5.65±0.11) d to (4.33±0.12) d. Process stability improved, with average volatile fatty acids (VFAs) during stable operation dropping from 1708 mg/L to 1033 mg/L. Microbial analysis revealed enhanced diversity and enrichment of Synergistetes and Syntrophomonas, indicating direct interspecies electron transfer (DIET) promotion. Biochar at low concentrations enhances AD by immobilizing microbes and facilitating electron transfer, while high concentrations (10 g/L) may inhibit methanogenesis due to fatty acid degradation blockage, yet total methane production remained above control. These findings demonstrate that biochar addition at 2.5 g/L effectively enhances methane production and process stability in KW-ES co-digestion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3892-2
Single-atom co-catalysts on semiconductor substrates offer a cost-efficient route to enhance photocatalytic performance with minimal precious metal loading. However, precise tuning of local coordination environments and construction of efficient single-atom co-catalysts remain challenging for overall water splitting. Here, we employ an icing-assisted photochemical reduction strategy to anchor atomically dispersed Pt species as hydrogen evolution co-catalysts on Al3+-doped SrTiO3 (Pt SA-STO). The optimized Pt SA-STO exhibits remarkable activity, with hydrogen and oxygen evolution rates of 13.62 and 6.71 mmol h−1 g−1, respectively, and a turnover frequency (TOF) of 2114.5 h−1. We pioneer the use of nuclear magnetic resonance (NMR) spectroscopy to quantitatively track the temporal evolution of Pt4+ to Pt2+ under continuous irradiation during the icing-assisted photoreduction. Advanced characterizations and theoretical calculations confirm that single-atom Pt co-catalysts facilitate directional transfer and extraction of photogenerated charge carriers, effectively suppressing surface recombination. This work provides insights into designing novel single-atom co-catalysts by deepening understanding of electronic configurations and active sites in photocatalytic overall water splitting.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041409
High-entropy alloys (HEAs) have emerged as promising catalytic materials for organic wastewater treatment owing to their unique catalytic activity, structural stability, and corrosion resistance. This review systematically elaborates the physicochemical properties of HEAs and their multi-path degradation mechanisms, with emphasis on Fenton reactions, photocatalysis, and tribocatalysis. The influence of mainstream preparation techniques—mechanical alloying, arc melting, gas atomization, and impregnation adsorption—on catalytic performance is critically compared. To overcome practical bottlenecks such as low powder recovery and rapid active-site deactivation, synergistic optimization strategies including metal doping, morphological modification, and composite engineering are proposed. The review identifies key challenges in enhancing degradation efficiency, scaling up production, and designing composite materials, and outlines future research directions for HEAs in wastewater treatment. This work provides a theoretical foundation for developing efficient and stable HEA-based environmental catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4091-4
Perovskite photovoltaics offer exceptional promise for next-generation solar energy, yet their commercialization is impeded by a critical scalability-stability gap: scalable solution-processed coating methods introduce distinct fluid dynamics and crystallization kinetics, yielding varied film morphologies and unstable degradation behaviors. This review addresses this challenge by re-examining stability exclusively through scalable solution-based fabrication. Degradation mechanisms in scalable processing are dissected, emphasizing precursor ink design—solute purity, ink aging, and solvent engineering—which collectively govern film uniformity and reproducibility. Intrinsic instabilities exacerbated under scalable processing are analyzed via crystal and compositional design, defect generation and passivation, and ion migration in large-area devices. Stable device architectures suitable for scalable manufacturing are explored, comparing n-i-p and p-i-n configurations and advancements in charge transport layers. Encapsulation is critically evaluated as the ultimate barrier for commercial modules, covering scalable techniques and material selections, alongside an assessment of operational stability under real-world environments including moisture ingress, thermal cycling, and UV-induced degradation. By integrating these insights, this review establishes a holistic framework for co-designing process scalability and operational longevity, outlining a coherent pathway toward durable and commercially viable perovskite solar modules.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4004-3
The development of efficient and stable oxygen evolution reaction (OER) electrocatalysts is critical for clean energy technologies, yet conventional cobalt-based spinel catalysts often suffer from insufficient activity and structural instability under operating conditions. To address these challenges, this study proposes and constructs a cation-ordered spinel-like catalyst (HVI Metal-CoMoO4/NF). The unique crystalline framework induces significant Jahn-Teller distortion and pre-stabilizes a Co2+/Co3+ mixed-valence state at the cobalt active centers via asymmetric Co–O–Mo bridges, effectively optimizing bulk charge transport. Electrochemical tests demonstrate that its performance significantly surpasses that of benchmark materials, requiring only an overpotential of 307 mV to drive a current density of 100 mA cm−2 in 1.0 M KOH, with a Tafel slope of 63.13 mV dec−1, maintaining stable operation for over 320 h at high current density. Crucially, our structural and in situ characterization results clearly reveal a stable and well-crystallized reconstruction behavior from the surface into the bulk of the spinel-like pre-catalyst during the OER. This work fundamentally addresses the challenges of disordered reconstruction and unstable active phases in traditional spinel catalysts, providing a paradigm for regulating the dynamic evolution of electrocatalysts through precise structural design.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60717-7
Alkali lignin, a high-volume byproduct from pulp and paper manufacturing and biomass refining, is a promising feedstock for aromatic hydrocarbon production in liquid fuels due to its high energy density and abundant aromatic moieties. However, its highly cross-linked polymeric structure hinders efficient valorization. This work investigates catalytic conversion of alkali lignin into bio-oil under in situ H2 supply from formic acid. A series of Ni-Mo/h-BN bimetallic catalysts with varied metal ratios were synthesized by impregnation and characterized by XPS, XRD, and other techniques. The effects of reaction parameters on H2 production via aqueous-phase reforming (APR) of formic acid were evaluated. Optimal H2 yield was achieved at a formic acid-to-water molar ratio of 1:10 and a Ni/Mo atomic ratio of 3:1. H2 yield increased monotonically with temperature from 220 to 280 °C, reaching a maximum of 38.48 mmol. Subsequently, influences of reaction temperature and residence time on bio-oil production were examined. The highest heavy bio-oil yield (18.93%) and maximum relative content of aromatic hydrocarbons (13.81%) were both achieved at 280 °C. Prolonged reaction time reduced heavy bio-oil yield and aromatic hydrocarbon abundance while favoring furan derivatives. This work demonstrates good synergy between in situ hydrogen generation from formic acid and lignin hydrogenation in the temperature range 240–280 °C.