SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4309-8
Iridium-doped cobalt oxide nanosheets derived from a ZIF template were evaluated as oxygen evolution reaction (OER) catalysts for proton exchange membrane water electrolysis (PEMWE). Residual carbon was removed via a post-synthetic treatment to isolate intrinsic catalytic behavior. The Ir0.23Co0.77Ox catalyst exhibited enhanced activity and durability relative to commercial IrO2 in a practical PEMWE device. Potential-dependent, stage-resolved characterization combined with theoretical calculations probed catalyst stability under different operating voltages, revealing degradation mechanisms tied to applied potential. Contact angle measurements showed that the Ir0.23Co0.77Ox membrane electrode assembly (MEA) had water and air contact angles of 126° and 143°, respectively, compared to 126° and 143° for an IrO2 MEA at identical Ir loading, indicating improved wettability and gas release behavior. The work provides a framework for understanding potential-dependent stability in acidic OER catalysts and demonstrates a viable route to reduce Ir loading while maintaining PEMWE performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3629-3
Electrically pumped lasers with reduced physical dimensions are critical for future optical information processing, storage, and photonic integrated circuits. However, electrical injection in perovskite lasers faces challenges including material instability, non-radiative losses, and Joule heating. Here, we demonstrate an ultralow-threshold perovskite microlaser decorated with gold nanoparticles (AuNPs), enabling simultaneous optical pumping and current injection at ambient temperature. The lasing threshold is reduced to 8.6 μJ/cm², approximately 44% lower than that of pristine devices (15.3 μJ/cm²). The AuNPs, with optimized size, enhance both lasing performance and electrical properties, achieving a current injection density of 2.98 kA/cm². AuNPs accelerate hot-carrier cooling, reducing non-radiative recombination and mitigating Joule heating. The threshold decreases progressively with increasing electrical assist fraction. Stability tests confirm excellent resistance to aging and humidity, with stable lasing output under co-excitation in ambient air. This work underscores the feasibility of electrically driven perovskite microlasers, offering a pathway toward electrically pumped microlaser diodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3805-1
The sluggish kinetics of oxygen reduction and evolution reactions (ORR/OER) at the air electrode impede the practical deployment of fiber zinc-air batteries (FZABs) for wearable electronics. Conventional bifunctional catalysts suffer from an inherent activity trade-off due to the distinct mechanisms of ORR and OER. Here, we propose a spatial decoupling strategy to overcome this limitation by engineering isolated Fe single atoms and Fe–Ir dual-atom pairs on a nitrogen-doped carbon matrix (Fe/FeIr-NC). In this architecture, Fe single atoms serve as ORR centers, while Fe–Ir pairs with tunable spacing are tailored for OER, enabling complete functional separation and independent optimization. The catalyst exhibits an ORR half-wave potential of 0.91 V and an OER overpotential of 250 mV at 10 mA cm−2, yielding a record-low bifunctional gap (ΔE = 0.57 V) that outperforms all reported single- and dual-atom catalysts. A flexible fiber zinc-air battery based on this catalyst delivers a peak power density of 3920 W kg−1, along with a 1.4-fold increase in energy efficiency and a 2.6-fold extension in cycle life compared to the commercial Pt/C + IrO2 benchmark. This work not only breaks the traditional activity trade-off in bifunctional catalysis but also offers a promising route toward high-performance power sources for wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3777-0
Optically clear adhesives (OCAs) are critical for next-generation optoelectronic systems, yet their end-of-life management remains a sustainability challenge. Here, we report a debondable and robust polyurethane (PU)-based OCA that integrates both mechanical and chemical recyclability. The PU-based OCA exhibits high optical transparency (>90% transmittance from visible to near-infrared), strong adhesion to glass and polymeric substrates (bonding strength up to 5.0 MPa), and thermally sensitive H-bonding interactions that enable on-demand deadhesion at elevated temperatures. This capability facilitates non-destructive detachment of functional assemblies, promoting component reuse and material recycling. The adhesive demonstrates excellent mechanical properties, including ductility and strength, and outperforms several commercial optical adhesives in key performance metrics. Its straightforward synthesis and industrial scalability make it a promising solution for advancing circular economy principles in optoelectronic device manufacturing. The work addresses critical bottlenecks in balancing mechanical performance, adhesion/detachment, and recyclability, offering a transformative approach to sustainable advanced manufacturing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507043
Municipal sludge with high moisture content and strong viscosity tends to form a dense crust during conventional rotary drum drying, reducing heat and mass transfer efficiency and prolonging drying time. This study proposes a thermal steel ball-enhanced rotary drum drying method that introduces high heat capacity, high thermal conductivity steel balls to achieve synergistic contact heat conduction and mechanical disturbance. An evaluation system incorporating dimensionless moisture ratio (MR), drying rate (DR), characteristic drying time (tdry), effective moisture diffusivity (Deff), and volumetric evaporation intensity (U) was established. Results show that compared with conventional drying, steel ball-enhanced drying increased maximum drying rate (DRmax) by 22.59%–41.19%, U by 38.06%–93.43%, and shortened tdry by 27.56%–48.30%, with more pronounced advantages under high load conditions. Deff was significantly higher throughout the process, with maximum increase up to 48.30%, indicating that ball rolling and collision effectively disrupt the crust and promote moisture migration. Mechanistic analysis reveals that the performance enhancement arises from the dual action of thermal-mechanical coupling and mechanical disturbance, which enhances local heat flux via contact conduction and dynamically renews the drying interface, shortening diffusion paths. This study elucidates the heat and mass transfer mechanisms of thermal steel ball-enhanced sludge drying, providing theoretical support and technical reference for efficient sludge volume reduction and dryer design optimization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024092906
Microplastic pollution in rivers and lakes has become a research hotspot, yet studies in Anhui Province have predominantly focused on northern and central regions, leaving southern Anhui under-investigated. This study addresses that gap by examining the Xin'an River in Huangshan City, a typical river in southern Anhui. Surface water and sediment samples were collected in December 2023. In surface water, microplastic concentrations ranged from 350 to 3700 n·m−3, with particles of 0–0.5 mm dominating (33.93%). Fibrous shapes were most prevalent (59.83%), and colored particles accounted for 50.27%. In sediments, concentrations ranged from 25 to 200 n·kg−1, with 0–0.5 mm particles again dominant (49.63%). Fibers comprised 47.08% of sediment microplastics, and white particles accounted for 34.74%. Polymer analysis identified polyethylene terephthalate (PET) as the most abundant material (36.61%), followed by polyamide (PA) (23.22%). Source analysis suggests that fibrous microplastics originate primarily from fiber-based products such as clothing, home textiles, and fishing nets. These findings provide essential baseline data for water resource management, pollution assessment, and ecological remediation of the Xin'an River.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010804
Heterogeneous Fenton technology employs solid catalysts to activate H2O2, generating hydroxyl radicals (·OH) that oxidatively degrade organic pollutants. Among reported catalysts, iron-based materials are most prevalent but suffer from insufficient active sites and sluggish Fe(III)/Fe(II) cycling. Compositing iron with carbon materials increases active site density and accelerates Fe(II) regeneration, thereby enhancing catalytic efficiency. This review summarizes recent advances in carbon/iron-based heterogeneous Fenton catalysts, analyzing reaction mechanisms and characteristics for organic pollutant removal. It also discusses external energy field-assisted strategies (e.g., photo-, electro-, and ultrasound-assisted) that augment reaction kinetics. The paper concludes with perspectives on future development of carbon/iron-based Fenton-like materials, emphasizing the need for scalable synthesis and mechanistic elucidation. Key challenges include maintaining stability under continuous operation and achieving cost-effective production. The review highlights that carbon/iron composites with optimized interfacial properties can significantly improve H2O2 utilization and broaden pH applicability, addressing limitations of conventional Fenton processes. Future research directions include designing catalysts with tailored porosity and surface functionality, and integrating physical fields to synergistically enhance pollutant mineralization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021005
Microplastic pollution in freshwater environments has escalated, leading to increased accumulation in wild fish. This study investigated the occurrence characteristics of microplastics (MPs) in the gills, gastrointestinal tract (GIT), and muscle of four wild fish species with different feeding habits from Baiyangdian Lake, China. MPs were detected in all tissues. The average abundance was highest in the GIT (11.63 ± 10.76 items/individual), followed by gills (7.44 ± 6.79 items/individual), and lowest in muscle (3.91 ± 3.16 items/individual). The majority of MPs were transparent and black fibers smaller than 0.5 mm. Polymer analysis identified polypropylene (PP) and polyethylene (PE) as dominant components. Significant differences in MP abundance were observed among species, with carnivorous and herbivorous fish (e.g., snakehead and grass carp) showing higher total MPs than omnivorous and planktivorous fish (e.g., mosquitofish and topmouth gudgeon). However, when normalized by body weight, smaller fish exhibited higher MP concentrations in the GIT, suggesting a greater risk per unit mass. This study provides baseline data on tissue-specific MP distribution in wild freshwater fish with varying feeding behaviors and habitats, highlighting the influence of trophic level and body size on MP accumulation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511057
To investigate the effects of applying sewage sludge aerobic fermentation products on antibiotic resistance genes (ARGs) in the rhizosphere soil and phyllosphere of pakchoi (Brassica chinensis L.), field experiments were conducted with three treatments: sludge product (sludge group), chemical fertilizer (fertilizer group), and no fertilizer (control). Antibiotic residues, abundances of ARGs and mobile genetic elements (MGEs) were measured in rhizosphere soil and phyllosphere, and microbial community composition and virulence factor (VF) contributions were annotated via metagenomics. Results showed that antibiotic concentrations in rhizosphere soil were generally higher than in phyllosphere. Compared with control, sludge application increased soil antibiotic content by 12.70%, whereas fertilizer increased it by only ~3%, indicating a more significant exogenous input from sludge. At the resistance level, total ARG abundances in rhizosphere soil and phyllosphere of the sludge group increased by 25.47% and 73.08%, respectively, relative to control, with concurrent increases in beta-lactam resistance genes and MGEs such as integron intI1. Sludge application may enhance integron-mediated gene capture and horizontal transfer potential, driving resistance risk accumulation in both phyllosphere and rhizosphere soil. Conversely, fertilizer application reduced ARG abundances by 53.40% in rhizosphere soil and 13.50% in phyllosphere compared with control, consistent with decreased microbial community abundance and diversity, suggesting that reduction of host bacteria and dissemination vectors was a key reason. In community structure, Proteobacteria dominated the phyllosphere, while Chloroflexi dominated rhizosphere soil. Correlation networks identified Sphaerobacter thermophilus and Aggregatilinea lenta positively correlated with multiple ARGs (r≈0.95–1.00), whereas Solirubrobacter sp. CPCC_204708 was negatively correlated (r≈−0.91). Virulence factor contributions followed trends similar to ARGs. Sludge fermentation products simultaneously increased ARG prevalence and related risk indicators in both rhizosphere soil and phyllosphere of pakchoi, providing a reference for risk identification and safe application of sludge fermentation products in agriculture.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607004
Pelletizing technology is widely applied in biomass and coal fuel processing, offering advantages in transport, storage, and energy density. Coal gasification fine slag (CGFS), a carbon-rich coal-based solid waste, holds potential as a fuel. This study prepared centimeter-scale composite pellets by blending CGFS with various biomass types under 6 MPa at room temperature for 2 minutes. Combustion and emission characteristics were investigated using a self-developed flat-flame macro-thermogravimetric reactor simulating high heating rate conditions. Results showed that biomass type significantly influenced combustion due to chemical composition differences. Introducing biomass altered fuel particle composition, enhancing combustion rates of single-component fuels by 3–5 times during volatile combustion. Co-combustion reduced NOx and CO emissions by over 50% compared to pure CGFS. Higher biomass ratios accelerated volatile release and shortened burnout time but increased NO emissions due to higher volatile nitrogen content. Conversely, CO emissions decreased due to improved char combustion conditions. These findings provide critical experimental support for optimizing clean and efficient solid fuel production from CGFS and biomass.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051701
This study investigated the effects of selenium nanoparticles (SeNPs) on the growth, mycelium morphology, copper (Cu2+) removal rate, extracellular polymeric substances (EPS), and intracellular enzyme activity of Aspergillus flavus TL-F3 (A. flavus TL-F3) under Cu2+ stress. Results showed that different concentrations of Cu2+ inhibited the growth of A. flavus TL-F3. The highest Cu2+ removal rate of 56.32% was observed at a Cu2+ concentration of 50 mg·L−1. Under 50 mg·L−1 Cu2+ stress, 0.25 mg·L−1 SeNPs promoted the growth of A. flavus TL-F3, increasing its biomass by 2.71%, and significantly enhanced the fluorescence intensity of EPS, Na+/K+-ATPase activity, and decreased malondialdehyde (MDA) content, reduced superoxide dismutase (SOD) and catalase (CAT) enzyme activities. Additionally, SeNPs stimulated the glutathione (GSH-GSSG) cycle in A. flavus TL-F3, elevating glutathione peroxidase (GPX) and glutathione reductase (GR) activity by 17.2% and 23.94%, respectively, and increasing reduced glutathione (GSH) content by 18.59%, and decreasing the GSH/GSSG ratio, thereby effectively alleviating Cu2+ toxicity. Fourier transform infrared spectroscopy indicated that surface functional groups of A. flavus TL-F3, including carboxylic acid, alcohol, phenol, and phosphate/sulfate functional groups, might bind with Cu2+, enhancing its tolerance to Cu2+. This study enriches the theoretical knowledge of microorganism-heavy metal interactions and provides deeper insights into microbial heavy metal resistance mechanisms.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608009
To investigate the flow and heat transfer characteristics of natural draft direct air-cooling towers (NDC) for large coal-fired power generating units, a three-dimensional CFD numerical model covering major plant buildings, air-cooled radiators, and ambient wind fields was established based on the NDC systems of a 2×660 MW unit of a power plant. The influences of meteorological factors, including ambient wind speed, ambient temperature, and ambient wind direction, as well as regulation measures such as rolling shutters, louvers, and bypass windows on the heat dissipation performance of NDC towers were systematically analyzed. The results demonstrate that ambient wind speed acts as the dominant factor governing the performance of the NDC system. As wind speed rose, the uneven distribution of air intake volume and heat dissipation among each cooling delta increased remarkably, which elevated the unit back pressure, and the upstream tower suffered more severe impacts than the downstream one. Ambient temperature exerted a slight effect on circumferential flow distribution, yet substantially changed the overall back pressure of the system. In terms of regulation strategies, closing rolling shutters in the windward zone and reducing the opening of partial louvers can improve air flow redistribution to a certain extent, but will reduce the total air flow rate and total heat dissipation of the entire tower. By contrast, bottom bypass windows can effectively optimize the air intake on the leeward side and boost heat dissipation under high-wind operating conditions, whereas top bypass windows deliver only limited improvement effects. This research can provide fundamental data and technical references for the optimal design, operational regulation, and energy-saving retrofitting of large NDC units.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4146-8
The conventional trial-and-error approach for the research and development (R&D) of high-performance super-hydrophilic coatings presents long-standing challenges, including data scarcity, unclear structure-activity relationships, and lack of design guidelines. In this study, an innovative multi-model framework that synergistically integrates a specialized polymer large language model (PolyLLM) and a polymer machine learning model (PolyML) for intelligent R&D of super-hydrophilic coating systems is designed and demonstrated. During the hydrophilic polymer research phase, the multi-model leverages the domain-specific insights and chemical tool capabilities of the fine-tuned PolyLLM to systematically screen 852 hydrophilic monomers and generate 3880 hypothetical polymer architectures. By utilizing the PolyML, the multi-model enables precise performance predictions and quantitative evaluations of feature importance to facilitate efficient high-throughput screening of optimal structures from the generated polymer database. Experimental validation confirms that the multi-model achieves a mean absolute error (MAE) below 10% across various polymer property prediction tasks compared to experimental data. This approach leads to the rapid discovery of hydrophilic polymers with exceptional anti-swelling and wear-resistance. In developing super-hydrophilic coatings, the multi-model effectively combines PolyLLM's guidance for large-scale synthesis with PolyML's capabilities for precise formulation optimization and curing parameter adjustments. The effectiveness of multi-model is demonstrated by the accelerated development of high-performance anti-fogging coatings for swim goggles and optical films with outstanding water- and wear-resistance that significantly outperform leading commercial products. This multi-model offers a flexible approach for advanced polymer coatings, leading to a seamless connection between laboratory research and industrial development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.