SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4153-2
Direct seawater electrolysis offers a promising route to green hydrogen production, circumventing freshwater scarcity. However, the presence of chloride ions (Cl−) poses severe challenges, including competing chlorine evolution reaction (CER) and corrosion of anode catalysts. Here, we report a dual-atom catalyst design, RuCr-Ni3P, where Ru atoms with strong chloride affinity and Cr atoms as Lewis acid centers are co-doped into a nickel phosphide matrix. This catalyst exhibits outstanding oxygen evolution reaction (OER) activity and selectivity in alkaline seawater, achieving stable operation for over 4000 hours at industrially relevant current densities. Mechanistic studies reveal that Cl− ions are selectively captured by Ru sites, forming a dynamic Ru–Cl coordination motif that electronically modulates adjacent Ni centers, promoting the formation of high-valent Ni>3+ species. This switches the OER pathway from the lattice oxygen mechanism (LOM) to the more efficient adsorbate evolution mechanism (AEM). Concurrently, Cr sites facilitate the formation of Cr–OH species, creating a localized alkaline microenvironment that further enhances OER kinetics. This dual-site synergistic mechanism transforms Cl− from a detrimental impurity into a beneficial chemical switch, concurrently enhancing both activity and stability. Our findings provide a paradigm shift in seawater electrolysis catalyst design, turning a longstanding challenge into an opportunity for efficient and durable hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3658-1
Organic-inorganic hybrid copper(I) halide semiconductors have attracted extensive attention for applications in phosphor-converted white light-emitting diodes (pc-WLEDs), X-ray imaging, and photodetectors because of their superior photo/radioluminescence, structural diversity, and eco-friendliness. In previous work, a strategy combining coordinated anionic inorganic modules with cationic derivatives yielded highly efficient blue-emitting hybrids, but synthesis complexity limited practical use. Here, we report a facile, efficient, and rapid solution-based ultrasonic treatment method for synthesizing high-performance blue-emitting phosphors using inexpensive, commercially available tetraethylammonium halides (TEAX, X = Cl, Br, I). The synergistic interplay of ionic and covalent bonds in these compounds endows them with a high photoluminescence quantum yield (PLQY) of 70% and excellent stability. These materials exhibit thermally activated delayed fluorescence (TADF), delivering outstanding performance in pc-WLEDs and X-ray imaging. Their exceptional properties highlight significant potential for use in optoelectronic devices and X-ray scintillators. This work provides an important reference for rapid synthesis of high-performance copper(I) halide hybrid phosphors and paves the way for commercial application.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3761-7
Ruthenium-based materials, including metallic Ru and RuO2, are promising electrocatalysts for electrochemical water splitting (EWS) due to their high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, their practical application is hindered by the relatively strong adsorption of reaction intermediates on Ru surfaces and the oxidative dissolution of RuO2 under operating conditions. This review provides a comprehensive overview of recent progress and challenges in Ru-based electrocatalysts for EWS. We first summarize the fundamentals of EWS, including reaction mechanisms and activity descriptors. Then, we detail typical synthesis methods such as hydrothermal/solvothermal syntheses, organic ligand-assisted syntheses, pyrolysis, acid etching, cation exchange, and molten salt-assisted syntheses. Subsequently, we focus on enhancement strategies, including alloying, doping, structure design, interface engineering, single-atom catalyst design, high-entropy alloy design, phase engineering, and defect engineering, with typical examples illustrating structure-property correlations. Finally, we address remaining challenges and future prospects for the development of efficient and durable Ru-based electrocatalysts for sustainable hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3773-7
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells suffer from significant open-circuit voltage (VOC) deficits due to severe interfacial and bulk recombination, restricting their power conversion efficiency (PCE) far below the Shockley-Queisser limit. This work proposes a low-temperature annealing strategy during ITO sputtering (SA) to synergistically address these challenges. The temperature applied during ITO sputtering not only improves the crystallinity, carrier concentration, and optical transmittance of the ITO layer but also promotes the diffusion of In from ITO into both CdS and CZTSSe layers. Consequently, lattice matching at the CZTSSe/CdS interface is optimized, enabling epitaxial growth. And a favorable ITO/In:CdS/In&Cd:CZTSSe structure with optimal band alignment is obtained. As a result, a champion device with a PCE of 14.29% was achieved. The SA-treating also enabled the CZTSSe solar cells to achieve the highest VOC reported to date, exceeding 590 mV. This underscores the essential role of SA processing in optimizing interface engineering and suppressing defects, thus promoting the development of low-cost, high-performance kesterite photovoltaics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507062
The construction of predictive models for the recurrence of blackening and odor in urban water bodies has become a critical foundation for refined management of urban water environments. Based on water quality monitoring data from 16 cities in the Yangtze River Basin from 2020 to 2023, this study systematically evaluated six typical comprehensive index calculation methods and proposed a probabilistic prediction model for water blackening and odor recurrence centered on the VIKOR composite index. Through sampling analysis and literature review, a power-law relationship between transparency (y) and turbidity (x) was established (y = 3.12x−0.66), leading to a critical turbidity threshold of 46.9 NTU for blackening and odor. Using ANOVA, recursive feature elimination, and random forest, five indicators—turbidity, dissolved oxygen (DO), total phosphorus (TP), permanganate index (CODMn), and ammonia nitrogen (NH3-N)—were selected as the model's indicator system, with importance ranking: turbidity > DO > TP > CODMn > NH3-N. The VIKOR composite index exhibited the most robust mapping relationship with blackening probability, achieving high accuracy (RMSE = 0.029, MAE = 0.020) and consistency (NSE = 0.918, R2 = 0.918), whereas models based on other indices yielded R2 values below 0.84. The model demonstrated good predictive performance across the Yangtze, Pearl, Haihe, and Yellow River basins. This model offers a universal decision-making tool for precise identification, early warning, and targeted management of water blackening and odor recurrence, with potential integration into urban water smart platforms.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60630-X
Chemical looping methane steam reforming (CL-MSR) enables sequential production of high-selectivity syngas and high-purity hydrogen via redox cycling, yet single iron-based oxygen carriers suffer from poor cycling stability, low reactivity, and sintering. This study modified Fe2O3/Al2O3 oxygen carriers with Cu, La, and Ce additives via dip-coating, and systematically characterized their physicochemical properties, reactivity, and hydrogen production performance. Results showed that spinel-phase CuFe2O4 exhibited higher reactivity than perovskite LaFeO3 and CeO2, promoting deeper reduction of Fe2O3. Fe58Cu2Al achieved an oxygen storage capacity of 6.5 mmol/g. During CH4 reaction, Fe58Cu2Al exhibited the highest oxygen loss of 12.1 g/100 g oxygen carrier, with syngas yield of 5.15 mmol/g—1.33 and 1.59 times that of Fe60Al. In hydrogen production, the 2% Cu-modified carrier yielded 5.13 mmol/g H2, 1.51 times that of pristine Fe60Al, with purity exceeding 98%. After ten cycles, H2 yield remained at 3.61 mmol/g, surpassing the single-cycle output of pristine Fe60Al (3.39 mmol/g), demonstrating superior dispersion and coking resistance. The study establishes Cu modification as an effective strategy to enhance reactivity and cyclic stability of iron-based oxygen carriers for CL-MSR hydrogen production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3867-1
The pursuit of atomically thin semiconductors has long promised a new era in nanoelectronics. Among them, two-dimensional (2D) transition metal dichalcogenides (TMDCs), such as MoS2 and WSe2, have emerged as leading candidates for sub-1 nm transistor channels due to their ability to mitigate short-channel effects, positioning them as promising contenders for sustaining Moore's Law. However, industrial-scale application of these 2D semiconductors remains limited by a fundamental bottleneck: the scalable growth of high-quality single-crystal TMDC wafers. Conventional chemical vapor deposition (CVD) methods typically produce polycrystalline films containing mirror-twin domains and grain boundaries, which induce non-uniform carrier scattering and severely degrade electronic performance. Consequently, achieving precise control over grain boundaries and realizing wafer-scale single-crystalline 2D films is essential for the development of next-generation integrated circuits and high-performance electronic devices. Very recently, Wang and his collaborators reported a universal and robust epitaxial strategy that realizes wafer-scale growth of single-crystal TMDCs, specifically MoS2, WS2, MoSe2, and WSe2 semiconductors, on 150-mm wafers for the first time. This remarkable achievement bridges the long-standing gap between laboratory-scale synthesis and semiconductor foundry compatibility, marking a historic milestone in the evolution of 2D semiconductors 'from lab to fab'. The core innovation lies in atomic-scale interface engineering. Conventional c-plane sapphire (α-Al2O3) substrates possess a near-central-inversion symmetric surface, leading to two energetically degenerate, antiparallel orientations of TMDC domains. This symmetry inevitably causes twin boundaries. Wang's team overcame this symmetry constraint by introducing a monolayer of lanthanum (La) to passivate the sapphire surface. The La atoms induce surface reconstruction, reducing the symmetry from P3 to P1, and amplify the energy difference between antiparallel domains by nearly two orders of magnitude, thereby enabling unidirectional epitaxial alignment and the elimination of grain boundaries across the entire 150-mm wafer. Using this strategy, Wang's group successfully achieved 150-mm single-crystal wafers of MoS2, WS2, MoSe2, and WSe2 semiconductors grown by both thermal CVD and metal-organic CVD (MOCVD) methods. Wafer-scale second-harmonic generation (SHG), Raman, and photoluminescence (PL) mappings confirmed the excellent uniformity and quality of the films.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041405
Microplastics, as a class of emerging environmental contaminants, pose global concerns due to their potential ecological and human health impacts. Accurate identification and quantification of microplastics in environmental matrices are essential for assessing their environmental fate and ecological risks. Pyrolysis-based analytical methods, which decompose macromolecules into smaller fragments followed by gas chromatographic separation and mass spectrometric detection, offer high sensitivity and accuracy, making them significant for microplastic analysis. Despite these advantages, their application remains nascent, with limited comprehensive understanding of their applicability across diverse environmental media. This review systematically compares three pyrolysis-based techniques—pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-differential scanning calorimetry (TGA-DSC), and thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC-MS)—for microplastic detection in various matrices. The effectiveness of each method is evaluated in terms of sensitivity, selectivity, and matrix compatibility. Critical challenges, including lack of standardized protocols, complex sample pretreatment requirements, and limitations in quantifying mixtures, are identified. Future research directions emphasize the need for standardization, optimization of pretreatment for complex matrices, and integration with complementary techniques such as FTIR and Raman spectroscopy to enhance comprehensive microplastic characterization. This review provides a critical framework for selecting appropriate pyrolysis-based methods and highlights areas requiring further methodological development.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60664-0
The selective hydrogenation of biomass-derived furfural (FAL) to high-value chemicals such as furfuryl alcohol (FOL) or tetrahydrofurfuryl alcohol (HFOL) is pivotal yet challenging due to the need for precise control over reaction pathways. In this study, a Ni2Al-LDO (layered double oxide) catalyst with highly dispersed surface NiO was synthesized via structural topological transformation of layered double hydroxides. The catalyst exhibited excellent performance in furfural hydrogenation, achieving a 91.42% yield of FOL at 160 °C and 1.4 MPa H2. Gradual reduction of Ni2Al-LDO produced Ni/NiO mixtures, enabling a tunable shift from FOL to HFOL as NiO content decreased and metallic Ni content increased. After reduction at 700 °C for 2 hours, the HFOL yield reached 93.95% under identical conditions. CO2-TPD, NH3-TPD, and FT-IR analyses revealed that variations in reduction degree influenced furfural adsorption behavior. NiO species selectively adsorb the C=O group of furfural, with isopropanol serving as the hydrogen source via the Meerwein-Ponndorf-Verley (MPV) pathway, yielding FOL. In contrast, metallic Ni0 surfaces facilitate flat adsorption, enabling simultaneous activation of both the furan ring and carbonyl group, and can activate both H2 and isopropanol, with H2 as the primary hydrogen source, leading to complete hydrogenation to HFOL. This work elucidates a clear structure-activity relationship centered on the metal oxidation state and provides a practical reduction-engineering approach for designing adaptable catalysts in biomass upgrading.