SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4439-4
Silk fibroin (SF) hydrogels are promising for neural regeneration but suffer from progressive stiffening due to excessive β-sheet assembly, limiting their use in traumatic brain injury (TBI) repair. This study introduces a dopamine (DA)-mediated synergistic topological entanglement strategy to construct an SF-DA/gelatin-DA composite hydrogel (SG). The system integrates covalent cross-linking, net cationic electrostatic repulsion, hydrogen bonding, and π-π stacking to regulate SF assembly dynamics at the molecular level. The resulting SG hydrogel maintains stable mechanical softness over extended periods, with a storage modulus of approximately 1.2 kPa after 28 days, compared to a 5-fold increase in pure SF hydrogels. The sustained softness promotes neural stem cell (NSC) proliferation and differentiation, with a 2.5-fold increase in βIII-tubulin expression and a 1.8-fold increase in GFAP expression after 14 days. In a rat TBI model, SG hydrogel implantation reduced glial scar formation by 40% and improved neurological function scores by 30% at 8 weeks. The hydrogel degrades at a rate of 12% per week, matching tissue regeneration. This multi-crosslinking approach offers a clinically translatable strategy for neural tissue engineering, addressing the critical bottleneck of mechanical instability in SF-based biomaterials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4505-9
Transition metal hydroxides are promising oxygen evolution reaction (OER) catalysts for alkaline water electrolysis. This study reports Ce-doped Co(OH)2 electrocatalysts synthesized via one-step electrodeposition, where the Ce3+/Ce4+ ratio is precisely controlled by deposition temperature. The optimized Ce-Co(OH)2 catalyst, obtained at 40°C, exhibits an overpotential of 236 mV at 10 mA cm-2 and maintains stability for 200 h. In an anion-exchange membrane water electrolyzer (AEMWE), the Ce-Co(OH)2 anode achieves a cell voltage of 2.04 V at 1 A cm-2 and operates for over 500 h at 500 mA cm-2. Mechanistic analysis reveals that Ce3+/Ce4+ dynamic electron buffering regulates surface reconstruction: during OER, electron transfer direction reverses (Ce → O → Co), with Ce donating electrons to Co sites to prevent over-oxidation and structural collapse. This work establishes a versatile strategy for balancing surface reconstruction and structural stability in Co-based OER catalysts, providing a foundation for designing high-performance, durable alkaline water oxidation electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4303-7
Sodium-ion batteries (SIBs) are promising for grid-scale storage and low-speed electric vehicles, yet their electrochemical behavior is governed by intricate mechanical-electrochemical coupling effects, rendering failure mechanisms not fully understood. Here, we develop an in-situ pressure-electrochemical monitoring system and reveal the failure mechanism of commercial Ah-level NaNi1/3Fe1/3Mn1/3O2//hard carbon (NNFMO//HC) sodium-ion pouch cells. Under an initial external pressure of 500 kPa, the full cell retains 90.07% of its capacity after 500 cycles at 0.5 C. Operating at the optimal pressure of 500 kPa effectively avoids heterogeneous sodium deposition in HC anodes, suppresses gas evolution from electrolyte decomposition, and prevents irreversible phase transitions in NNFMO cathodes during long-term cycling, thereby mitigating capacity degradation. Deviation from this optimal pressure leads to spatially non-uniform sodium deposition, accelerated electrolyte decomposition, and irreversible cathode phase transitions, collectively accelerating capacity fade. This work establishes a quantitative relationship between external pressure and pouch cell degradation, advancing SIBs development and application.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4166-5
Oxygen evolution reaction (OER) represents a significant kinetic bottleneck in sustainable energy conversion due to its complex multi-step electron transfer process. Spin manipulation has recently emerged as a promising strategy to overcome traditional catalytic scaling relationships. However, the commonly used ferromagnetic materials or external magnetic fields suffer from practical limitations including material constraints and high energy consumption. The chiral-induced spin selectivity (CISS) effect in chiral inorganic nanomaterials with high stability, conductivity, and exceptional chiroptical properties offers a groundbreaking alternative by enabling spin polarization without the need for external magnetic fields. This review systematically examines the application of chiral inorganic nanomaterials for improving OER efficiency via the CISS effect. The fundamental principles of CISS and its influence on OER kinetics are discussed. Recent experimental advances highlighting the enhanced catalytic performance are analyzed. Future research directions and challenges in leveraging chirality and spin as key design principles for next-generation OER electrocatalysts are highlighted.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4217-y
Rational design and construction of effective photocatalysts is a promising way for green and sustainable chemistry, but still a great challenge. Herein, taking triphenylamine-containing aldehydes as reactants, two covalent triazine frameworks (CTFs), tris(4-formylphenyl)amine (TPA)-CTF and tris(4-formylbiphenyl)amine (TBPA)-CTF, were rationally constructed. The strong electron donor property of the triphenylamine moieties derived from the initial reactants and the strong electron acceptor nature of the in-situ formed built-in triazine rings in CTFs endowed these robust triphenylamine-based CTFs with donor-acceptor (D-A) or donor-π-acceptor (D-π-A) structure features. Photocatalytic experiments revealed that, compared with the controlled phenyl analogue CTF, 1,3,5-tri(p-formylphenyl)benzene (TFPB)-CTF, both of the triphenylamine-based CTFs exhibited superior photocatalytic activity not only in photocatalytic hydrogen peroxide generation, but also in photocatalytic aerobic oxidations of diverse organic substrates. Theoretical studies further confirmed that their enhanced photocatalytic performance should be attributed to their unique D-A or D-π-A features in the constructed triphenylamine-based CTFs. This work successfully demonstrated that rational selection of reactants containing electron donor moieties to construct CTFs should be a reliable way for the construction of effective photocatalysts for photocatalytic oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507064
This study investigates pollutant removal characteristics and kinetic behaviors in sewage networks, and analyzes their impact on the carbon-to-nitrogen ratio (C/N, as COD/TN) of influent to wastewater treatment plants. Source water quality sampling at drainage outlets revealed spatial and temporal variations in C/N, with domestic sewage exhibiting higher C/N than industrial sewage, and diurnal peaks reaching 6.92 versus 4.71 during off-peak hours. Using a pilot-scale adjustable sewage network system in Kunshan, experiments were conducted under high (0.491 m·s−1) and low (0.089 m·s−1) flow velocities, monitoring pollutant removal over 144 hours. Pseudo-first-order kinetics were applied to model COD and TN removal. Results showed that COD (including SCOD and PCOD), BOD5, and SS achieved approximately 80% removal within 144 h, with higher removal at low flow velocity. TN, NH3-N, and TP exhibited lower overall removal rates. Kinetic fitting revealed that COD removal rate constants (kCOD) were significantly higher than those for TN (kTN), and both decreased with increasing flow velocity: at low velocity, kCOD=0.0167 h−1 and kTN=0.0029 h−1; at high velocity, kCOD=0.0127 h−1 and kTN=0.0020 h−1. Simulations based on actual source pollutant concentrations indicated that the time for C/N to drop to the denitrification critical value of 4.50 was 12.24 h at high velocity, but shortened to 9.49 h at low velocity. These findings demonstrate that increasing flow velocity effectively retards the decline of C/N. Therefore, regulating network flow velocity to reduce hydraulic retention time is a key strategy for maintaining adequate C/N at the terminal and ensuring denitrification efficiency in wastewater treatment plants.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024110202
Anaerobic digestion (AD) is an environmentally friendly biochemical technology for waste treatment and renewable energy production, yet its methane conversion efficiency remains suboptimal. This study employed flux balance analysis (FBA) to determine the optimal temperature for methane production in AD, and subsequently regulated key flexible nodes in the metabolic pathway to maximize methane flux. At the optimal temperature of 40 °C, up-regulating the acetyl-CoA flexible node increased methane flux by 48.5%, while up-regulating the acetate node increased it by 36.6%. The higher improvement via acetyl-CoA regulation is attributed to the fact that 40 °C is unfavorable for hydrogen-producing acetogenic bacteria, making acetyl-CoA the critical control point. These findings demonstrate that flexible node regulation can overcome the limitations of temperature optimization alone. The FBA methodology provides a reliable, cost-effective approach for optimizing target product yields in AD and other fermentation systems, requiring only input and output measurements to resolve intermediate metabolic fluxes.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604003
Emerging contaminants (ECs) in wastewater from urban transportation infrastructure remain poorly characterized. This study employed high-resolution mass spectrometry (HRMS)-based non-target screening to systematically identify the composition and spatial distribution of ECs in wastewater from three functional zones of a metro maintenance depot: storeroom (S1), office/residential area (S2), and final discharge outlet (S3). A total of 417 contaminants were detected, spanning eight categories including industrial materials, pharmaceuticals, pesticides, and natural products. Among these, 48 substances were identified with Level 1 confidence via spectral matching. Pesticides exhibited the highest detection frequency and concentration levels, representing the primary contaminant load. Semi-quantitative concentration heatmaps of 24 pesticides revealed significant spatial variation: S2 showed the highest number and concentration of contaminants, reflecting inputs from landscaping and vector control; S1 and S3 showed lower levels, indicating dilution, migration, and attenuation. Representative pesticide bifenox displayed a clear concentration gradient (S2 > S1 > S3), suggesting transport mechanisms such as surface runoff, hydraulic transfer, and sorption. These findings underscore the complexity and diversity of EC sources in metro depot wastewater, highlight the need to prioritize pesticides in regulatory management, and provide fundamental data for understanding EC environmental behavior and informing water environment risk assessment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3778-8
The global surge in polyvinyl chloride (PVC) waste demands urgent technological solutions that address both environmental persistence and resource recovery. Here, we present a triple-functionalization strategy that converts chlorinated plastic waste into high-performance sodium-ion battery anodes through molecular-level control of carbon architectures. Sequential dichlorination, sulfonation, and N-doping collaboratively reconfigure precursor reactivity, steering pyrolysis toward hierarchically porous hard carbon with tailored defect chemistry. Sulfonic groups stabilize 3D carbon skeletons during carbonization, enabling closed-pore formation with an average diameter of ~2.55 nm while N-doping expands interlayer spacing (0.382 nm) and creates adsorption-active pyrrolic-N sites. This defect-engineered synergy delivers unprecedented sodium storage metrics: 355 mAh g−1 reversible capacity at 0.1 A g−1 (95.4% of graphite’s Li-ion capacity), a capacity retention of 216 mAh g−1 after 1000 cycles at 1.0 A g−1 (70.1% capacity retention), and 188 mAh g−1 even at a high current density of 5.0 A g−1. Operando analyses reveal a potential-dependent storage hierarchy: surface-dominated adsorption transitions to intercalation/filling-dominated behavior with defect-buffered structural integrity. The process simultaneously achieves 25% carbon yield from PVC and avoids toxic dioxin emissions, establishing a scalable prototype for sustainable energy storage systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3857-1
High-Be Cu-Be alloys exhibit dendritic segregation and brittle β/γ phases, complicating processing and applications. This study investigates the influence of cooling path on eutectoid transformation, microstructure, and mechanical properties in Cu-2.8Be and Cu-3.8Be alloys. A two-step homogenization treatment effectively eliminates segregation and suppresses the formation of harmful acicular phases. Diffusion-kinetic and thermodynamic analyses demonstrate that both the initial temperature and cooling rate determine eutectoid morphology and extent. Crystallographic and Eshelby-based analyses reveal that the β → γ transformation involves an isotropic contraction of ~3.9%, producing much lower strain energy than the anisotropic β → α transformation (~28.5% expansion and ~9.2% contraction), thus explaining the preferential nucleation of γ. Rapid cooling promotes incomplete eutectoid decomposition along grain boundaries, forming fine α/γ lamellae with interlamellar spacing down to ~7 nm. Lattice strain analysis confirms considerable distortions at α/γ interfaces (ε_xx = 0.0167, ε_yy = 0.0095). The mechanical incompatibility and high internal strain at these interfaces cause stress concentration and crack initiation. This work establishes a process-microstructure-property-mechanism framework essential for controlling the performance of high-Be Cu-Be alloys.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024042404
The direct catalytic decomposition of the greenhouse gas N2O into nitrogen and oxygen holds significant environmental importance. In this study, CaO-modified Rh-based catalysts were prepared via a stepwise impregnation method. The catalyst structures were characterized, and their catalytic performances for N2O decomposition were investigated. The characterization results demonstrate that CaO doping significantly enhances catalytic activity and water resistance. Specifically, the 0.5Rh/Al2O3 catalyst exhibited a N2O conversion below 5% at 300 °C, whereas the 0.5Rh-4Ca/Al2O3 catalyst achieved 50% conversion under identical conditions, indicating markedly improved low-temperature activity. Compared to the undoped catalyst (0.5Rh/Al2O3), CaO doping (0.5Rh-xCa/Al2O3) strengthens metal-support interactions, improves Rh dispersion on the support surface, and modulates the electron density around Rh, thereby substantially boosting N2O decomposition capability. The catalyst also demonstrated excellent stability, maintaining essentially constant conversion over 40 h of reaction. These findings underscore the potential of alkaline earth metal oxide doping as an effective strategy for designing high-performance noble metal catalysts for N2O abatement.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3993-y
Conventional liquid-phase in-situ synthesis of Cu-TiB2 composites often suffers from coarse and non-uniformly distributed reinforcements, stemming from insufficient understanding and control over the in-situ nucleation and growth mechanisms of TiB2 particles. This study introduces a novel melt dispersion-turbulent mixing (MDTM) in-situ reaction technology to fabricate high-performance Cu-TiB2 composites. The MDTM strategy synergistically refines reaction micro-regions by reducing the initial melt droplet size via melt dispersion while enhancing solute convection via turbulence, promoting high-density nucleation and refinement of TiB2 particles. Based on turbulence characteristics and in-situ reaction kinetics, we optimized the melt disperser parameters and established a quantitative model linking particle size to disperser rotation speed and reactant solute concentration. It was found that disperser rotation speed governs three distinct nucleation and growth mechanisms for TiB2 particles. Low-density nucleation at low disperser rotation speeds (0–50 r/min) leads to coarse TiB2 particles. At medium rotation speeds (100–150 r/min), the refinement of micro-regions in the dual-melt reaction achieves high-density TiB2 nucleation. Conversely, at high rotation speeds (150–200 r/min), intense turbulence weakens the nucleation driving force and induces TiB2 particle coarsening. This work provides new insights into liquid-phase in-situ reaction mechanisms and offers a novel, controllable route for fabricating high-performance micro/nano particle-reinforced metal matrix composites.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3933-9
The global cold chain consumes vast amounts of energy and emits greenhouse gases, while many regions lack proper refrigeration. To address this, we developed a dual-layer electrospun membrane (PZ-PML) for energy-free fruit preservation. The top PVDF-HFP/ZIF-8 layer offers 97.64% solar reflectance and 92.5% mid-infrared emissivity, providing 70 W/m2 radiative cooling. The bottom PAN/MIL-101/LiCl layer, with 2.18 g/g water uptake at 80% RH, delivers ~156 W/m2 evaporative cooling, lowering surface temperature by 6.1 °C under ~400 W/m2 irradiation. The membrane also shows ≥99% antibacterial efficiency against E. coli and S. aureus. Applied to strawberries, it reduced dehydration to 20.2% after 9 days, compared to 68.2% and 74.4% in controls. Additionally, it demonstrates durability, superhydrophobicity, and UV stability. This scalable solution offers energy-free fruit cooling, reducing postharvest losses while maintaining quality and safety.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509086
Groundwater contamination by nitrate and antibiotics has become a global concern. This study evaluated the continuous performance of permeable reactive barrier (PRB) columns packed with zero-valent iron (ZVI) and pyrite (FeS2) combined with denitrifying microorganisms (ZFM) for simultaneous removal of nitrate and ofloxacin (OFL). Control columns included soil (S), microorganisms (M), and ZVI/FeS2 (ZF). Over 30 days of continuous operation, the ZFM column achieved average removal efficiencies of 88% for nitrate and 78% for OFL, significantly higher than controls. The ZFM system maintained higher active iron concentration (0.68 mg·L−1) compared to ZF (0.48 mg·L−1), mitigated pH increase, and sustained lower oxidation-reduction potential (ORP), favoring stable performance. XRD and XPS analyses revealed that microbial involvement promoted FeS formation (2θ=30.1°) and reduced ZVI passivation, extending material lifespan. High-throughput sequencing showed that while overall microbial diversity remained stable, key functional populations including norank_f_Fermentibacteraceae, norank_f_Anaerolineaceae, Longilinea, and Anaerolinea increased in abundance by 2.93%, 0.55%, 1.53%, and 0.62%, respectively, enhancing nitrate and OFL removal. These findings demonstrate that integrating microorganisms with ZVI/FeS2 in PRB systems offers a promising approach for remediating combined nitrate and antibiotic contamination in groundwater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511057
To investigate the effects of applying sewage sludge aerobic fermentation products on antibiotic resistance genes (ARGs) in the rhizosphere soil and phyllosphere of pakchoi (Brassica chinensis L.), field experiments were conducted with three treatments: sludge product (sludge group), chemical fertilizer (fertilizer group), and no fertilizer (control). Antibiotic residues, abundances of ARGs and mobile genetic elements (MGEs) were measured in rhizosphere soil and phyllosphere, and microbial community composition and virulence factor (VF) contributions were annotated via metagenomics. Results showed that antibiotic concentrations in rhizosphere soil were generally higher than in phyllosphere. Compared with control, sludge application increased soil antibiotic content by 12.70%, whereas fertilizer increased it by only ~3%, indicating a more significant exogenous input from sludge. At the resistance level, total ARG abundances in rhizosphere soil and phyllosphere of the sludge group increased by 25.47% and 73.08%, respectively, relative to control, with concurrent increases in beta-lactam resistance genes and MGEs such as integron intI1. Sludge application may enhance integron-mediated gene capture and horizontal transfer potential, driving resistance risk accumulation in both phyllosphere and rhizosphere soil. Conversely, fertilizer application reduced ARG abundances by 53.40% in rhizosphere soil and 13.50% in phyllosphere compared with control, consistent with decreased microbial community abundance and diversity, suggesting that reduction of host bacteria and dissemination vectors was a key reason. In community structure, Proteobacteria dominated the phyllosphere, while Chloroflexi dominated rhizosphere soil. Correlation networks identified Sphaerobacter thermophilus and Aggregatilinea lenta positively correlated with multiple ARGs (r≈0.95–1.00), whereas Solirubrobacter sp. CPCC_204708 was negatively correlated (r≈−0.91). Virulence factor contributions followed trends similar to ARGs. Sludge fermentation products simultaneously increased ARG prevalence and related risk indicators in both rhizosphere soil and phyllosphere of pakchoi, providing a reference for risk identification and safe application of sludge fermentation products in agriculture.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60645-7
Volatile organic compounds (VOCs) from diverse sources severely impact atmospheric environment and human health. Manganese (Mn)-based catalysts, with exceptional structural diversity and abundant redox versatility, are widely used in catalytic combustion of VOCs. This review summarizes the catalytic performance of various Mn-based catalysts, emphasizing preparation strategies for high-performance materials and systematically analyzing how active site construction influences VOC combustion. Catalytic oxidation mechanisms are expounded in detail. Key aspects include MnOx polymorphs, doping with alkali metals (e.g., K+), transition metal composites (Co, Cu), and noble metal loading (Pt, Pd, Au). Performance metrics such as T90 values, oxygen vacancy concentrations, and specific surface areas are discussed. The review provides insights into deactivation mechanisms and anti-poisoning strategies, offering practical guidance for VOC pollution remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3825-x
Polymer-based dielectric materials with high energy density and thermal stability are critical for modern electric/electronic industries. Polyimide (PI) based materials are promising due to their high temperature resistance and chemical inertness, yet their inherently low dielectric constant and limited charge-discharge energy density restrict applications in film capacitors. While incorporating ferroelectric or conductive fillers can enhance dielectric performance, batch-to-batch inconsistency and physical deterioration remain problematic. This study focuses on molecular structure design and modulation, preparing hyperbranched polyimides with different dianhydride monomers and branching degrees. The effects of chain packing density with polar groups on dielectric and energy storage performances were systematically investigated via experimentation and molecular simulation. Results demonstrate a significant correlation between monomers' electrical distribution and packing density in polymer systems. Molecular simulation further elucidated the underlying mechanism. This work establishes a foundation for designing polymer-based dielectric materials with high dielectric and energy storage performances at the molecular level.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041405
Microplastics, as a class of emerging environmental contaminants, pose global concerns due to their potential ecological and human health impacts. Accurate identification and quantification of microplastics in environmental matrices are essential for assessing their environmental fate and ecological risks. Pyrolysis-based analytical methods, which decompose macromolecules into smaller fragments followed by gas chromatographic separation and mass spectrometric detection, offer high sensitivity and accuracy, making them significant for microplastic analysis. Despite these advantages, their application remains nascent, with limited comprehensive understanding of their applicability across diverse environmental media. This review systematically compares three pyrolysis-based techniques—pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-differential scanning calorimetry (TGA-DSC), and thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC-MS)—for microplastic detection in various matrices. The effectiveness of each method is evaluated in terms of sensitivity, selectivity, and matrix compatibility. Critical challenges, including lack of standardized protocols, complex sample pretreatment requirements, and limitations in quantifying mixtures, are identified. Future research directions emphasize the need for standardization, optimization of pretreatment for complex matrices, and integration with complementary techniques such as FTIR and Raman spectroscopy to enhance comprehensive microplastic characterization. This review provides a critical framework for selecting appropriate pyrolysis-based methods and highlights areas requiring further methodological development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3969-9
Phosphor-in-glass (PiG) materials are promising color converters for high-power laser illumination, yet suppressing interfacial reactions between phosphor and glass matrix at elevated sintering temperatures remains a critical challenge. Here, we report a Y3Al5O12:Ce3+ (YAG:Ce) phosphor-in-silica glass (PiSG) with high SiO2 content (>85 wt%) fabricated via a Cs2CO3 flux. Incorporation of Cs2O significantly inhibits SiO2-YAG:Ce reactions, preserving internal quantum efficiency (IQE) at 97.7% of pure YAG:Ce, and achieving 88.3% IQE even after calcination at 1400°C for 2 h. In contrast, smaller alkali ions (Li+, Na+) accelerate YAG:Ce decomposition. Mechanistic studies reveal that Cs+ with large ionic radius and weak interaction with oxygen suppresses non-bridging oxygen (NBO) formation, promoting a complete silica network that limits alkali ion diffusion. Leveraging the mixed alkali effect (10% Li2O + 5% Cs2O), the PiSG exhibits enhanced hydrothermal stability, withstanding 200°C treatment for 10 h. A PiG film-sapphire device delivers 3080 lm luminous flux and 213 lm W−1 efficiency under blue laser excitation. These findings establish YAG:Ce-PiSG as a highly promising color-conversion material for high-performance laser illumination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4004-3
The development of efficient and stable oxygen evolution reaction (OER) electrocatalysts is critical for clean energy technologies, yet conventional cobalt-based spinel catalysts often suffer from insufficient activity and structural instability under operating conditions. To address these challenges, this study proposes and constructs a cation-ordered spinel-like catalyst (HVI Metal-CoMoO4/NF). The unique crystalline framework induces significant Jahn-Teller distortion and pre-stabilizes a Co2+/Co3+ mixed-valence state at the cobalt active centers via asymmetric Co–O–Mo bridges, effectively optimizing bulk charge transport. Electrochemical tests demonstrate that its performance significantly surpasses that of benchmark materials, requiring only an overpotential of 307 mV to drive a current density of 100 mA cm−2 in 1.0 M KOH, with a Tafel slope of 63.13 mV dec−1, maintaining stable operation for over 320 h at high current density. Crucially, our structural and in situ characterization results clearly reveal a stable and well-crystallized reconstruction behavior from the surface into the bulk of the spinel-like pre-catalyst during the OER. This work fundamentally addresses the challenges of disordered reconstruction and unstable active phases in traditional spinel catalysts, providing a paradigm for regulating the dynamic evolution of electrocatalysts through precise structural design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4150-2
Bacterial infection and irregular wound morphology are major challenges in clinical wound management. Injectable hydrogels can conform to irregular wound geometries but often lack antimicrobial activity. Here, we report an injectable hydrogel (HPAu gel) formed by sequentially mixing phenylboronic acid-modified hyaluronic acid (HA-PBA) and chloroauric acid under alkaline conditions. The gel's internal multiple crosslinks enable uniform encapsulation of in situ-generated gold nanoparticles. Hydrogen bonds and phenylboronic acid ester bonds confer self-healing, injectability, and adhesion, allowing effective sealing of irregular cavities. In vitro, the hydrogel exhibits long-lasting photothermal stability and eliminates multiple bacterial strains. In a mouse dorsal full-thickness infected wound model, HPAu gel under near-infrared (NIR) irradiation eradicated Staphylococcus aureus, reduced inflammation (TNF-α fluorescence area significantly lower; IL-10 area 12.88‰ vs <2‰ in Blank), promoted vascular regeneration (CD31 and α-SMA expression increased), and accelerated wound healing. This work presents a promising strategy for treating irregular infected wounds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4185-6
Electrochemical uranium extraction from fluorine-containing nuclear wastewater is critical for nuclear fuel recovery, yet current electrode materials suffer from limited scalability and insufficient long-term stability. Here, we report a bulk monoclinic Nb2O5−x (H-Nb2O5−x) derived from commercial bulk niobium oxide via rapid reconstruction, exhibiting exceptional activity and robustness for electrochemical uranium extraction in fluorine-rich environments. The intrinsic active pairs of low-valent Nb4+ and compact oxygen structure strongly bind with dominant uranyl fluoride species (UO2F+, UO2F2, UO2F3−, UO2F4^2−), facilitating efficient separation. In a 30 g L−1 fluoride solution, H-Nb2O5−x achieved a uranium extraction efficiency of 99.1%. Notably, in a 10-L real nuclear wastewater test, the bulk material maintained stable performance over 40 days, reducing uranium concentration from 1372.3 mg L−1 to 0.93 mg L−1. This work demonstrates a scalable, durable electrode material for industrial electrochemical uranium extraction, addressing the bottlenecks of complexation and stability in fluoride-containing waste streams.