SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4471-6
Triplet sensitization, inspired in part by the natural management of triplet-state energy in photosynthetic systems, has emerged as a transformative strategy for overcoming the intrinsic photophysical limitations of photochromic systems driven by direct excitation, including rapid fatigue, inefficient photoconversion, and the stringent requirement for high-energy ultraviolet light. By exploiting triplet excited states and Dexter-type triplet–triplet energy transfer (TET), this strategy enables red-shifted activation and improved switching performance under milder irradiation conditions. This review summarizes recent advances in triplet-sensitized photochromism across two mechanistic platforms, E/Z isomerization (azobenzenes and overcrowded-alkene molecular motors) and electrocyclization (diarylethenes), examining the full range of triplet sensitizers employed to date, from metalloporphyrins, organic chromophores, and semiconductor quantum dots to metal-to-ligand charge-transfer (MLCT) and charge-transfer complexes (CTCs). Finally, we examine the key challenges of directional control, structural organization, and efficient long-wavelength sensitization, while discuss emerging strategies that may promote triplet-sensitized photochromism as a versatile platform for next-generation photoresponsive materials and light-controlled biomedicine.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4176-y
Three-photon microscopy (3PM) in the near-infrared-III (NIR-III) window (1600–1840 nm) enables high-resolution visualization of cerebral vasculature in vivo, but its imaging depth and quality are limited by the performance of fluorescent probes. Here, we report a probe optimization strategy transitioning from mirror symmetry to centrosymmetry, yielding a highly symmetric aggregation-induced emission (AIE) molecule, T4PQ. The centrosymmetric structure aligns donor-acceptor units, promoting uniform electron cloud delocalization and directional charge transfer, which enhances exciton formation and suppresses non-radiative decay, thereby increasing fluorescence quantum yield. This symmetry also boosts the three-photon absorption cross-section by enhancing electron delocalization and transition dipole moment, enabling stronger nonlinear optical responses under long-wavelength excitation. T4PQ nanoparticles (T4PQ NPs) exhibit an enhanced three-photon absorption cross-section, high fluorescence quantum yield, and excellent photostability. In murine models, T4PQ NPs achieved three-dimensional cerebrovascular imaging at a depth of 1785 μm and real-time hemodynamic observation in microvessels at 1006 μm depth, with good biocompatibility. These results validate the advantage of centrosymmetric molecular design for deep-brain imaging probes, offering a high-performance tool for neurovascular research.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3596-2
High-entropy alloys (HEAs) have shown great promise in the CO2 reduction reaction (CO2RR) due to their tunable composition and unique physical and chemical properties. However, the role of HEAs in CO2RR and the underlying reaction mechanism remain underexplored, particularly through in situ techniques. In this work, we investigate the mechanism of CO2 reduction on AuAgCuPdPt HEAs using in situ Raman spectroscopy and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy to reveal key intermediates and reaction pathways. Our results demonstrate that within the potential window of −0.2 to −0.7 V vs. reversible hydrogen electrode (RHE), the AuAgCuPdPt HEAs efficiently reduce CO2 to CO, achieving a Faradaic efficiency (FE) for CO greater than 90%, with a peak FE of 96.5% at −0.3 V vs. RHE. The CO2− intermediate was observed at low potentials, revealing the reaction pathway in the CO2 reduction process. Additionally, in situ ATR-FTIR results suggest that the introduction of an appropriate amount of Pt metal not only promotes water dissociation to generate protonic hydrogen, but also facilitates the desorption of *CO intermediates. The kinetic isotope effect of hydrogen-deuterium (H-D) confirms that water dissociation acts as a key proton donor in CO2RR. Furthermore, the catalyst of AuAgCuPdPt HEAs was applied as cathodes in a Zn-CO2 battery, achieving 90.23% FE for CO and a power density of 3.474 mW cm−2. This study provides new insights into the mechanistic understanding of CO2 reduction and underscores the importance of in situ spectroscopic techniques for advancing the design of efficient electrocatalysts for CO2 conversion.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61072-4
Sodium-ion capacitors (SICs) typically feature a hybrid design, incorporating a battery-type anode that operates by faradaic redox reactions and an activated carbon cathode that functions through electrical double-layer (EDL) adsorption/desorption. However, the kinetics of faradaic processes are inherently slower than those of EDL processes, leading to a fundamental problem known as kinetic imbalance between the electrodes, which hinders the development of high-performance SICs. To address this, we synthesized composites of bismuth nanoparticles in N-doped carbon (Bi@NC) by a high-temperature sintering method. The resulting Bi@NC anode has a specific capacity of 300 mAh g−1 at 0.5 A g−1, an exceptional rate capability (maintaining performance at currents exceeding 75 A g−1), and outstanding cycling stability over 12,000 cycles. Three-electrode Swagelok cell tests revealed that this high-rate Bi@NC composite effectively decreases the kinetic gap with the activated carbon cathode, as shown by an analysis of their respective potential swing windows (vs. Na/Na+). This enables the fabricated SIC to achieve a maximum energy density of 115 Wh kg−1, a peak power density of 45,535 W kg−1, and a long cycle life exceeding 8,000 cycles.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507085
This study investigates the spatiotemporal differentiation of suspended particulate matter (SPM) characteristics, sources, and their impacts on water quality between the Middle Route (closed artificial channel) and East Route (open natural water system) of the South-to-North Water Diversion Project. Thirty sampling sites (13 on the Middle Route, 17 on the East Route) were established, and samples were collected during dry and wet seasons. Water quality parameters and SPM characteristics were analyzed, including particle size distribution, total suspended solids (TSS), chlorophyll a, and stable carbon and nitrogen isotopes. Results show that the Middle Route maintains good and stable water quality, with SPM dominated by coarse particles (>63 μm, 61.43%–94.68%), total phosphorus (TP) <0.01 mg·L−1, and a significant positive correlation between chlorophyll a and coarse particles (r=0.60), indicating algal aggregation dominates particle formation. In contrast, the East Route exhibits high and fluctuating nitrogen and phosphorus concentrations, with SPM dominated by fine particles (<20 μm, 51.26%–88.61%), TP ranging from 0.03 to 1.11 mg·L−1, and a positive correlation with fine particles, suggesting significant external inputs. Carbon and nitrogen isotope analysis reveals that Middle Route SPM primarily originates from autochthonous algae (contribution >46.75%), while East Route SPM is influenced by both terrestrial C3 plants and algae. The distinct engineering and management approaches of the two routes lead to significant differences in SPM characteristics and sources, thereby affecting water quality dynamics. The Middle Route requires an 'algal reduction and hydrodynamic optimization' strategy to control algal-derived coarse particle deposition, whereas the East Route benefits from 'retention-sedimentation and wetland purification' to reduce external fine particles and pollutant inputs. This research provides theoretical support and practical guidance for differentiated SPM management in long-distance water diversion systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605018
To address the inadequacy of existing temporal emission allocation coefficients for oil storage, transportation, and sales sources in regions with distinct seasonal temperature variations, this study focused on a large oil depot in Northwest China. A method for establishing temperature-dependent hourly allocation coefficients for VOCs emissions was proposed, revealing a positive correlation between ambient temperature and emission coefficients. The coefficient peaked at 0.068 when temperatures exceeded 14 °C and dropped to a minimum of 0.007 below 8.5 °C. Annual VOCs emissions totaled 256.13 t, with summer contributing 108.89 t (42.51% of annual total) and winter only 12.54 t (4.90%), making summer emissions approximately 8.68 times higher than winter. Using CALPUFF dispersion modeling, dynamic source strength scenarios produced a maximum hourly concentration of 2242.7 μg/m³, a 55.12% increase over the constant source strength scenario (1445.8 μg/m³). The area of exceedance increased by 0.03 km², and the atmospheric environmental protection distance extended by 450 m, from 0 m to 450 m. These results demonstrate that conventional constant emission assumptions underestimate peak concentrations and protection distances, posing health risks to nearby residents. The study provides a scientific basis for localized emission regulation and improved environmental protection distance calculations.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60615-3
Co-pyrolysis of oil-rich coal and biomass is a promising route to enhance oil and gas production, yet the underlying synergistic mechanisms remain poorly understood. This study investigates the effect of hydrothermal pretreatment (HTP) on the co-pyrolysis of Huangling coal (H) and enzymatic hydrolysis lignin (E). Raw and pretreated samples were characterized via proximate/ultimate analysis, SEM, ICP-OES, and 13C-NMR. Fixed-bed pyrolysis experiments were conducted to evaluate synergistic performance. Results show that HTP reduces oxygen content, develops pore structure, and increases concentrations of inorganic metal ions (Ca, K, Fe) in the aqueous phase. Structural modifications bring the carbon skeleton of E closer to that of H, with increased bridge carbon ratio and improved thermal stability, aligning pyrolysis temperature ranges. For the H/E blend (8:2) after 24 h HTP, tar yield increases by 80.52% compared to untreated blend, with significant rises in aliphatic compounds and monocyclic aromatic hydrocarbons. Gas yields of H2, CO, and CH4 increase by 5.47%, 10.98%, and 9.27%, respectively, while CO2 and pyrolysis water generation are inhibited (water yield decreases by 93.98%). Semi-coke pore structure becomes more developed. The enhanced synergistic effect is attributed to a multi-fold mechanism of 'component interaction-structural modification-catalytic cracking'. These findings provide theoretical support for developing technologies to improve co-pyrolysis of oil-rich coal and biomass, advancing low-carbon, high-quality utilization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040401
Conventional zero-valent iron (ZVI) suffers from limited electron transfer due to its dense surface oxide layer. This study introduces a mechanochemical ball-milling strategy incorporating sodium chloride (NaCl) with ZVI to fabricate chloride-modified ZVI (Cl-ZVIbm). Using hexavalent chromium (Cr(VI)) as a model pollutant, Cl-ZVIbm exhibited a 76.5-fold enhancement in removal kinetics (0.0306 min−1 vs. 0.0004 min−1) compared to ball-milled ZVI (ZVIbm), achieving complete removal of 2 mg·L−1 Cr(VI) within 120 min. Spectroscopic characterization and density functional theory (DFT) calculations revealed dual regulation mechanisms: (1) Cl− substitution of surface hydroxyl groups alters coordination environments, enabling Cr(VI) adsorption via a bidentate binuclear configuration with adsorption energy reduced from –0.28 eV to –1.64 eV; (2) The strong electron-withdrawing effect of Cl− drives directional electron migration from the iron core to the surface, increasing surface Fe(II) content by 26.9% (67.5% vs. 53.2%) and facilitating direct electron transfer to reduce 99.5% of Cr(VI) into low-toxicity Cr(III). Notably, chloride leaching during reactions was only 0.0126 mmol·L−1, far below industrial wastewater discharge standards, confirming environmental compatibility. This work provides atomic-scale insights into chloride-mediated electronic modulation on ZVI surfaces, offering novel principles for interfacial engineering of environmental functional materials and a theoretical basis for heavy metal remediation technologies.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607002
In municipal solid waste (MSW) incineration simulation, the traditional FLIC-Fluent coupling method suffers from long iteration cycles across multiple operating conditions and significant errors due to data mapping at the coupling interface. This study developed a fully coupled bed combustion simulation program based on Fluent User-Defined Functions (UDF). By integrating four modules—dynamic regulation of particle emissivity, zonal motion control of the grate, bed drag shielding, and wall collision-induced fragmentation—the program achieved fully coupled calculation of solid waste particle movement, bed combustion, and furnace flow fields within a single Fluent platform, completely replacing the bed calculation functions of FLIC software. A 750 t/d reverse-inclined forward-feeding grate furnace in a Chinese waste-to-energy plant was selected for engineering validation. The model was calibrated using continuous operational data from 12 on-site measurement points. Results showed that the computational time per operating condition was reduced by 71.4% compared to the traditional FLIC-Fluent coupling method. The relative error between simulated furnace temperatures and on-site measurements was ≤4.10%, significantly outperforming the 9.68% maximum relative error of the traditional method. The proposed method provides a reliable engineering simulation solution for optimizing operating conditions and screening blending schemes in co-incineration of multi-source solid waste.