SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4346-y
Spinal cord injury (SCI) remains a formidable clinical challenge due to the complex, dynamic lesion microenvironment that impedes axonal regeneration and functional recovery. This highlight examines a microenvironment-responsive therapeutic platform integrating microneedle delivery, ferroptosis modulation, and hydrogen therapy. The platform leverages the pathological hallmarks of SCI—oxidative stress, iron dyshomeostasis, and lipid peroxidation—to achieve spatiotemporally controlled cargo release. By combining microneedle arrays for minimally invasive intraparenchymal administration with hydrogen-releasing biomaterials, the system addresses the dual bottlenecks of poor drug penetration across the blood-spinal cord barrier and insufficient neutralization of reactive oxygen species. Ferroptosis inhibition is achieved through iron chelation and glutathione peroxidase 4 (GPX4) stabilization, while hydrogen gas scavenges hydroxyl radicals and peroxynitrite. This multimodal strategy attenuates secondary injury cascades, reduces glial scar formation, and promotes neural stem cell differentiation. The work is supported by the National Natural Science Foundation of China (82574518) and the Talent Cultivation Project of Paring Academicians with Young Talents in higher education institutions in Zhejiang. The authors declare no conflict of interest. This highlight underscores the translational potential of microenvironment-responsive platforms for SCI repair, emphasizing the need for rigorous preclinical validation and scalable manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4369-1
Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries for large-scale energy storage due to sodium's abundance and low cost. Among cathode materials, polyanionic compounds like Na3V2(PO4)2O2F (NVPOF) offer high energy density and dual voltage plateaus at ~3.6 and 4.0 V, but suffer from low electronic conductivity and sluggish Na+ diffusion. Here, we report a dual-modulation strategy combining high-valence Nb5+ doping and polydopamine-derived carbon coating to synthesize Na3V1.94Nb0.06(PO4)2O2F-C (NVPOF-Nb-C) via a hydrothermal route. X-ray diffraction and Rietveld refinement confirm that Nb5+ doping induces slight lattice expansion without altering the tetragonal I4/mmm framework. Density functional theory calculations reveal that Nb5+ doping optimizes the crystal structure and reduces the Na+ diffusion barrier, while the uniform carbon coating enhances electron transport. Consequently, NVPOF-Nb-C exhibits remarkably improved electrochemical performance, including high reversible capacity, excellent rate capability, and ultralong cycling stability. In a full cell with hard carbon anode, it delivers a high energy density of 487.2 Wh kg−1 at 1C and retains 91.51% capacity after 3000 cycles at 20C. This work provides a synergistic strategy to overcome the intrinsic limitations of polyanionic cathodes for practical SIB applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4203-7
The solution process holds great promise for organic light-emitting diode (OLED) fabrication owing to its minimal material loss, simple processing and low equipment investment. However, solution-processed blue OLEDs still face the challenges of low electroluminescence efficiency and poor working stability. In this study, two new cross-linkable blue light-emitting molecules, v-4CzBn and v-5CzBn, were synthesized. They featured a multicarbazole-substituted benzonitrile donor–acceptor structure as the emitting core, with two vinyl phenyl units on the carbazole rings serving as cross-linking groups. A singlet–triplet energy gap of ΔEST ≤ 0.10 eV and a high reverse intersystem crossing rate (kRISC > 10^6 s−1) were achieved because the three-dimensionally confined covalent network structure formed through a thermal cross-linking reaction limited intramolecular motions and vibrational relaxations of luminescent units. Moreover, this structure suppressed irreversible morphological changes and structural deterioration of light-emitting units due to aggregation or crystallization, improving the light-emitting performance of the device. Nondoped solution-processed OLEDs with the structure of ITO/PEDOT:PSS/TFB/S-4CzBn/TPBi/LiF/Al exhibited blue emission with a peak at 488 nm, achieving a maximum external quantum efficiency of 12.01%, a maximum luminance of 11,141.15 cd m−2, and a T50 lifetime of 1375.66 h@100 cd m−2. This result represents the longest operational lifetime reported to date for solution-process devices with cross-linked emitting layers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4183-3
Excessive ultraviolet (UV) radiation poses significant risks to human health, necessitating highly sensitive detection systems. Organic photodetectors (OPDs) offer high sensitivity and tunable spectral response, but their UV performance is constrained by conventional glass/indium tin oxide (ITO) substrates and electrodes, and insufficient photoactive layer responsivity. Here, we report high-performance UV-OPDs achieved through UV-transparent window and active-layer optimization. Replacing glass/ITO with a UV-transparent window comprising a quartz substrate and PH1000 electrode enhances UV transmittance. Integrating the high UV-responsive blend PM6:Y6:PC71BM as the active layer, the optimal ternary UV-OPD exhibits external quantum efficiency (EQE) exceeding 53% across 280–400 nm, with a peak EQE of 78.29% and responsivity of 214.68 mA/W at 340 nm, alongside a rapid response time of 2.6/2.1 μs. This performance represents the best combination of responsivity and response time reported to date in the UV region. We demonstrate the potential of these UV-OPDs for outdoor real-time UV monitoring. This work presents a promising strategy for developing high-performance UV-OPDs through transparent substrate and electrode engineering, and active-layer optimization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3536-5
Nanomaterial-based optical biomedicine and devices have attracted significant attention for tumor diagnosis and treatment, yet their application in tumor ablation is often hindered by limited functional integration and concerns over excessive radiation exposure. In this study, we address these challenges by developing a multifunctional fiber probe based on lanthanide-doped nanoparticles, featuring decoupled modules for localized heating and optical thermometry. This design enables synergistic therapy under near-infrared (NIR) laser irradiation. Beyond achieving precise photothermal ablation and real-time temperature monitoring, we uncovered a unique phenomenon: the generation of reactive oxygen species (ROS) by these nanoparticles under NIR laser excitation, even in the absence of traditional photosensitizers. Through a combination of experimental and computational approaches, we elucidated the physical mechanisms underlying ROS generation in wide-bandgap lanthanide nanoparticles. Leveraging these insights, we constructed an all-optical fiber system capable of simultaneous precise thermal control and photodynamic therapy. Our findings offer valuable guidance for the development of advanced optical nanomaterials and devices for effective tumor treatment, both in vivo and in vitro.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3657-9
Perovskite/silicon tandem solar cells (TSCs) have achieved power conversion efficiencies (PCE) up to 34.9%, surpassing the Shockley-Queisser limit of single-junction devices. The interconnection layer (ICL) critically bridges top and bottom subcells, enabling charge carrier recombination. Conventional indium oxide (In2O3)-based TCOs suffer from high-energy ion bombardment during sputtering, damaging amorphous silicon subcells and reducing open-circuit voltage (VOC) and fill factor (FF). Additionally, indium scarcity and cost necessitate indium-free alternatives. Here, we introduce a highly degenerate indium-free samarium-doped cadmium oxide (CdO:Sm) TCO as the ICL for perovskite/SHJ TSCs, deposited via low-damage reactive plasma deposition (RPD). The ultrathin CdO:Sm film (~3 nm) exhibits average transmittance of 85% (400–1200 nm) and 90% (800–1200 nm), enabling efficient near-infrared absorption in the bottom subcell. High doping concentration and mobility ensure excellent electrical conductivity. The low work function (4.04 eV) of CdO:Sm facilitates carrier tunneling and efficient recombination. Devices employing CdO:Sm ICL achieved approximately 1% higher efficiency compared to those with indium-based TCO ICLs. Detailed characterization including contact resistivity (1.68 mΩ cm2), conductive atomic force microscopy, Kelvin probe force microscopy, and photoluminescence quenching confirm enhanced carrier transport and extraction. This work demonstrates a viable indium-free ICL for high-efficiency perovskite/SHJ TSCs, addressing both performance and sustainability challenges.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112102
Based on the 2022 activity data of non-road mobile sources in Hebei Province, this study employed the emission factor method recommended by the Guidelines to estimate emissions of CO, HC, NOx, PM2.5, PM10, and SO2. A comprehensive emission inventory was established, followed by spatial and uncertainty analyses. Scenario analysis, aligned with the 14th Five-Year Plan policies, was used to project emissions for 2030. The results indicate that non-road mobile sources in Hebei emitted 76.1×10^3 t of CO, 20.6×10^3 t of HC, 164.0×10^3 t of NOx, 8.5×10^3 t of PM2.5, 9.0×10^3 t of PM10, and 2.4×10^3 t of SO2. Agricultural machinery was the dominant contributor to CO, HC, PM2.5, and PM10, accounting for over 60.0% of CO emissions. Railway locomotives were the primary source of NOx, contributing 50.9%. For SO2, agricultural machinery and railway locomotives contributed 39.0% and 44.4%, respectively. The highest emitting cities were Tangshan (21.3%), Shijiazhuang (15.7%), Cangzhou (11.6%), and Handan (11.6%). Ship emissions were concentrated in Tangshan Port; civil aviation emissions were mainly in Shijiazhuang, Tangshan, Qinhuangdao, and Handan; railway emissions were distributed in Shijiazhuang, Baoding, and Handan. Under the updated emission standard scenario, NOx and PM10 emissions in 2030 could be reduced by approximately 35.0%. The phase-out of old machinery yielded the largest reduction in CO (36.0%), while both electrification and phase-out scenarios significantly impacted HC emissions.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.226111
Efficient capture of the greenhouse gas nitrous oxide (N2O) is critical for climate change mitigation and resource recovery. In this study, two guanidinium-based hydrogen-bonded organic frameworks (HOFs) with pyridyl nitrogen site isomerism, namely G-5,5'-BPyDC and G-4,4'-BPyDC, were constructed using 2,2'-bipyridine-5,5'-dicarboxylic acid and 2,2'-bipyridine-4,4'-dicarboxylic acid as ligands. The effects of ligand structure on hydrogen-bonded network, pore environment, and N2O/N2 adsorption separation performance were systematically investigated via single-crystal X-ray diffraction, thermogravimetric analysis, Hirshfeld surface analysis, and gas adsorption experiments. Both frameworks are built via N-H...O hydrogen bonds. The asymmetric unit of G-5,5'-BPyDC contains two methanol molecules, resulting in larger free volume and surface area compared to G-4,4'-BPyDC, which exhibits more compact packing. Both materials show decomposition temperatures above 290°C, indicating good thermal stability. Hirshfeld surface analysis reveals that the total contribution of O-H/H-O and N-H/H-N hydrogen bonds in G-5,5'-BPyDC (32.0%) is higher than that in G-4,4'-BPyDC (29.7%). At 25°C and 4.0 MPa, the N2O adsorption capacity of G-5,5'-BPyDC is 2.32 mmol/g, surpassing that of G-4,4'-BPyDC (2.02 mmol/g). IAST calculations show that the selectivities of G-5,5'-BPyDC for N2O/N2 (50:50 and 10:90) mixtures reach 29.26 and 111.32, respectively, significantly superior to those of G-4,4'-BPyDC (6.61 and 17.03). Pyridyl nitrogen site isomerism effectively optimizes N2O/N2 adsorption and separation by modulating pore polarity and hydrogen-bonded network, offering a new strategy for isomer design.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3790-5
Near-infrared (NIR) phosphors with high quantum efficiency (QE) and thermal robustness are critical for phosphor-converted light-emitting diodes (pc-LEDs). Here, a Cr3+-activated Lu2BaAl4SiO12 (LBASO) garnet phosphor is engineered via chemical unit cosubstitution of [Ba2+-Si4+] for [Lu3+-Al3+] in Lu3Al5O12 (LuAG), inducing a strong crystal field that yields NIR emission at 705 nm. The optimized LBASO:0.07Cr3+ exhibits an internal quantum efficiency (IQE) of 84.82% and external quantum efficiency (EQE) of 46.02%. Notably, it demonstrates anti-thermal quenching (ATQ) with 126.03% of its initial intensity at 498 K under 442 nm excitation, attributed to a wide band gap, weak electron-phonon coupling, defect trap energy levels, high structural rigidity, and optimized electron population distribution. A NIR pc-LED fabricated with this phosphor achieves an output power of 134.99 mW and photoelectric conversion efficiency of 11.4% at 100 mA drive current. These results underscore the potential of LBASO:Cr3+ for applications in plant lighting, night vision, and nondestructive analysis.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040202
Halophenols are highly toxic disinfection byproducts and common taste-and-odor pollutants in drinking water. In this study, a palladium catalyst confined within the pores of UiO-66 (Pd@UiO-66) was prepared via a double-solvent method and applied for the catalytic hydrodechlorination of 4-chlorophenol (4-CP). A surface-supported catalyst (Pd/UiO-66) was synthesized by deposition-precipitation as a benchmark. Comprehensive characterization using ICP-OES, XRD, TEM, EDX mapping, XPS, and in situ CO-IR revealed that Pd@UiO-66 exhibited smaller Pd particle sizes, higher Pd dispersion, and a greater proportion of cationic Pd species (Pdn+) compared to Pd/UiO-66. These features enhanced the activation and cleavage of the C–Cl bond. Catalytic tests demonstrated that Pd@UiO-66 achieved >90% removal of 4-CP within 15 minutes, with phenol as the sole degradation product, showing significantly lower predicted toxicity (ECOSAR) than the parent compound. The kinetics followed the Langmuir-Hinshelwood model. Pd@UiO-66 exhibited 2.1 times higher initial activity and 1.2 times higher turnover frequency than Pd/UiO-66. Moreover, the pore confinement effect imparted high stability, with no significant loss in initial activity (within 10%) after five reaction cycles. These results highlight the potential of confined Pd catalysts for efficient removal of halophenolic odorants from water.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032006
A thiol-functionalized Ti3C2Tx (SH-Ti3C2Tx) material was synthesized via chemical bonding of dithiothreitol (DTT) onto Ti3C2Tx MXene for the adsorptive removal of As(III) from water. Characterization by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) confirmed a typical two-dimensional layered structure with DTT covalently attached. The adsorption of As(III) on SH-Ti3C2Tx followed the Langmuir isotherm model, indicating monolayer adsorption. At pH 7, the maximum adsorption capacity reached 55.6 mg·g−1, which is 2.8 times higher than that of pristine Ti3C2Tx (20 mg·g−1). X-ray photoelectron spectroscopy (XPS) revealed that As(III) uptake primarily occurred via formation of As–S bonds. To enable continuous treatment, SH-Ti3C2Tx was loaded onto melamine sponge via electrostatic interactions to fabricate a flow-through adsorption column (SH-Ti3C2Tx@MS). This column achieved removal efficiencies of 99.5% for both high (100 mg·L−1) and low (100 μg·L−1) As(III) concentrations, reducing effluent As(III) to below the World Health Organization guideline of 10 μg·L−1. The spent column could be regenerated using 1 mol·L−1 NaOH solution, retaining over 80% of its initial removal efficiency after five consecutive adsorption–desorption cycles. The SH-Ti3C2Tx material demonstrates significant potential for efficient and reusable removal of As(III) from contaminated waters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3855-8
The escalating environmental burden of plastic waste necessitates innovative chemical recycling strategies that circumvent the energy-intensive and catalytic limitations of conventional depolymerization. This study highlights a seminal advance by Qi Zhang, Da-Hui Qu, Ben L. Feringa, and co-workers, published in Nature Nanotechnology, which integrates supramolecular self-assembly with dynamic covalent chemistry to achieve catalyst-free, solvent-free polymer-to-monomer transformation. The system employs thioctic amide (TAA), a derivative of α-lipoic acid featuring reversible disulfide bonds and hydrogen-bonding amide groups. Notably, TAA monomers resist ring-opening polymerization upon melting due to cross-stacked packing driven by amide hydrogen bonds, which kinetically separates the 1,2-dithiolane rings. Introduction of formic acid (FA) as a supramolecular modulator disrupts the hydrogen-bond network, enabling dynamic disulfide ROP. Subsequent solvent removal yields nanocrystalline poly(disulfide) (Nc-poly(TAA)), which upon annealing at 120 °C reorganizes into a semicrystalline polymer (Sc-poly(TAA)) with a Young's modulus of 3.9 GPa, comparable to Nylon 6. The semicrystalline polymer exhibits hierarchical order with densely packed spherulites and periodic lamellae stabilized by reticular hydrogen bonds, conferring exceptional mechanical robustness and resistance to humidity (80% RH for six days). Rheological analyses reveal a relaxation time exceeding 90 years at room temperature, indicating a kinetically trapped, metastable state. Remarkably, the polymer reverts quantitatively to monomeric crystals under mild heating (120 °C, 24 h) without catalyst or solvent, achieving >90% purity and quantitative yield. The recovered monomer can be repolymerized to virgin-quality polymer, establishing a closed-loop cycle. Life-cycle assessment shows a carbon footprint of only 0.36 kg CO2 per kg product, underscoring the environmental benefits. This work demonstrates a fundamentally new route to circular polymers, merging supramolecular chemistry with dynamic covalent bonds for sustainable materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608021
To address the significant increase in fine particulate matter (PM2.5) and its chemical component concentrations caused by the concentrated setting-off of fireworks and firecrackers during the Spring Festival in Yancheng City, this study introduced the Bayesian-optimized XGBoost model (BO-XGBoost) based on PM2.5, particulate component, and meteorological observation data. The model simulated non-setting-off baseline concentrations using meteorological factors as independent variables, enabling quantitative assessment of setting-off contributions. Results showed that the concentrated setting-off exerted significantly differentiated effects on various pollutants. Among water-soluble ions, K+ and Mg2+ were core characteristic tracers, with concentrations reaching 15.89 and 20.08 times baseline levels on Lunar New Year's Eve, directly reflecting high-intensity emissions. Secondary conversion ions such as SO4^2- and NO3^- showed sustained high contributions on both Lunar New Year's Eve and the fifth day of the first lunar month, reflecting cumulative effects of atmospheric chemical transformation. Among inorganic elements, K, Ba, and Sr were core characteristic tracers, with concentrations showing explosive growth on Lunar New Year's Eve, serving as direct fingerprints of fireworks. Elements such as Pb and Mn were also significantly affected, reflecting direct heavy metal emissions. Temporal comparisons indicated that emission intensity on Lunar New Year's Eve was significantly higher than on the fifth day, with increased proportional contribution of secondary conversion processes on the fifth day. The study achieved accurate quantification of setting-off contributions through a data-driven model, clarifying pollution fingerprint characteristics and temporal differentiation patterns, providing scientific basis for air quality management and policy optimization during the Spring Festival.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4007-x
Hydrogels, with their hydrophilicity, flexibility, and environmental friendliness, are highly desirable for moisture-electric generators (MEGs) that harness ubiquitous moisture to generate electrical energy. As the active material layer in MEGs, hydrogels play a crucial role in absorbing atmospheric moisture and converting chemical potential energy into electricity. However, the relatively low output current of the device and the instability of hydrogels pose challenges to the development of high-performance hydrogel-based MEGs. Herein, we introduce a straightforward, feasible, cost-effective, and versatile two-step solvent displacement strategy to overcome the barrier associated with the development of MEGs. Through tunable solvent interactions of glycerol and water, the moisture absorption capability and stability of the hydrogel can be improved, while promoting favorable ion migration. Such an effective processing route not only significantly boosts the output performances but also greatly improves the long-term durability of hydrogel-based MEGs. Notably, the current output and power density of the treated MEGs can increase by up to two orders of magnitude. The mechanisms behind the intriguing observation are investigated by various characterizations and theoretical calculations. This universal strategy holds promise to be extended to various hydrogel-based MEGs. Moreover, the MEGs can be used for energy harvesting, self-powered respiratory monitoring, and non-contact humidity detection. This work offers new opportunities for advancing green energy and self-powered technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3998-8
Constitutional isomerism in covalent organic frameworks (COFs) has emerged as a powerful strategy to tailor material properties for photocatalytic applications. Here, we report the design and synthesis of two isomeric multicomponent COFs (MC-COFs) via Schiff-base condensation followed by Povarov reaction, converting imine linkages into quinoline structures. These isomeric MC-COFs exhibit opposing C=N bond orientations and distinct phenyl group alignments within the COF pores, leading to different torsion angles in the COF layers. Structural analyses reveal that enhanced planarity promotes π-π stacking and electron delocalization, resulting in favorable band structures and reduced exciton binding energies. Consequently, the optimized COF achieves a superior hydrogen peroxide (H2O2) production rate of 3128 μmol g−1 h−1 under visible light irradiation. This work underscores the critical influence of structural isomerism on the photocatalytic efficiency of MC-COFs and provides insights for rational design of high-performance COF-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4033-1
Photodetectors are critical components in modern optoelectronic systems, underpinning applications in optical communication, low-altitude economy, environmental monitoring, and national defense. Layered two-dimensional (2D) materials such as MoS2, WS2, black phosphorus (BP), and ReS2 have attracted extensive attention due to their remarkable electronic and optical properties, including facile mechanical exfoliation and tunable characteristics via thickness engineering. The absence of dangling bonds enables the construction of van der Waals (vdW) heterostructures free from lattice-matching constraints, promoting efficient charge transport, enhanced light absorption, and suppressed dark current. Among layered materials, semimetals such as graphene, PdTe2, MoTe2, and TaIrTe4 exhibit narrow or zero bandgaps, enabling ultrabroadband spectral responses from ultraviolet (UV) to terahertz (THz). ZrTe3, a layered gapless semimetal, demonstrates pronounced carrier transport features, including robust excitons and ultrafast carrier relaxation times, making it an ideal candidate for photodetection. However, pure ZrTe3-based photodetectors suffer from substantial dark current due to the absence of an energy bandgap, degrading signal-to-noise ratio and specific detectivity (D*). This work reports a high-performance broadband photodetector based on a ZrTe3/CuInP2Se6 heterostructure. By exploiting an asymmetric contact configuration that introduces a Schottky barrier, the device effectively suppresses dark current while enhancing photoresponse. The photodetector exhibits broad spectral sensitivity from UV to near-infrared (355–1177 nm), microsecond-level response speed, and high responsivity and specific detectivity. Beyond conventional photodetection, an optoelectronic information encryption-decryption application is demonstrated, where modulated light and bias voltage serve as dual input channels to encode and decode ASCII signals. This study resolves the challenge of high dark current in semimetal-based photodetectors and introduces a multifunctional platform for secure optoelectronic communication, highlighting the potential of ZrTe3 for next-generation photonic and quantum information technologies.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3502-2
Smart agriculture demands continuous, non-invasive monitoring of plant growth dynamics to enable precise, automated management. Existing rigid sensors and remote sensing platforms suffer from insufficient spatial and temporal resolution, mechanical mismatch with plant tissues, and inability to modulate growth. This study reports flexible, breathable strain sensors fabricated from composite nanofiber membranes (CNMs) of Ti2C2Tx (MXene), carbon nanotubes (CNTs), and thermoplastic polyurethane (TPU) via electrospinning and ultrasonic immersion. The MXene/CNTs dual-network conductive structure yields tensile gauge factors of 5.41, 7.39, and 3.39 over 0–20%, 20–50%, and 50–70% strain ranges, and bending sensitivities of 1.79, 0.89, and 0.46 over 0–30°, 30–90°, and 90–120°, respectively. A tensile sensor coupled with a Long Short-Term Memory (LSTM) deep learning model enables plant growth monitoring and phased prediction. A bending sensor integrated with a shape memory alloy (SMA) soft actuator forms a closed-loop sensing-actuating system that assists leaf growth. The platform demonstrates feasibility for accurate data collection in scientific cultivation and experimental breeding, with potential for unmanned monitoring and regulation in modern agriculture, alpine regions, deserts, or space environments. This work advances smart agriculture by merging flexible strain sensing, deep learning, and soft robotics for plant growth prediction and self-regulation.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3496-5
Flexible wearable electronics demand multifunctional e-skins that reconcile high strain sensitivity, wide operating range, low detection limit, air permeability, and self-powered capability. Existing MXene-based sensors suffer from rapid conductive network destruction due to weak inter-sheet interactions, limiting their working range. Inspired by the brick-and-mortar microstructure of natural nacre, a multilayered Ti3C2Tx (MXene)/carbon nanotubes (CNTs)/thermoplastic polyurethane (TPU) fibrous mat was fabricated via electrospinning and spraying. The tunable multilayer architecture yields a gauge factor of 5.8 × 10^4, a sensing range up to 535% strain, a detection limit of 0.15% strain, an 80 ms response time, and good durability. The sensing mechanism relies on the synergistic evolution of a 2D MXene/1D CNT conductive network and synchronous microcrack expansion. The e-skin also functions as a single-electrode triboelectric nanogenerator (TENG) with high output and stability, enabling tactile sensing and powering LEDs. Demonstrations include human physiological signal acquisition, cardiopulmonary resuscitation (CPR) training via smart gloves, and posture correction training for athletes. This nacre-mimetic self-powered e-skin offers a viable route for ergonomics, emergency medical services, and athlete training assessment.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3515-0
Near-infrared mechanoluminescent (ML) materials enable nondestructive stress detection and biological imaging, but practical deployment is constrained by narrow emission bandwidth, ultraviolet preirradiation requirements, and high stress thresholds. This study introduces Cr3+ into the simple, earth-abundant oxide host MgO to achieve self-recoverable broadband NIR ML. The optimized composition MgO:0.008Cr3+ exhibits a dominant ML peak at 809 nm with a full width at half maximum of 209 nm, and detectable emission under a 1 N stress threshold. The ML mechanism is attributed to localized piezoelectricity induced by Cr3+ incorporation. The material enables nondestructive wine quality assessment and demonstrates superior tissue penetration in a simulated biological stress imaging model. These results expand the library of self-recoverable NIR ML materials and provide a cost-effective pathway for practical NIR ML technologies.