SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4491-3
Magnetic tunnel junctions (MTJs) with multiferroic tunneling barriers offer a pathway to fully electrically controlled multi-state memory, addressing the high energy costs and scalability limits of magnetically controlled counterparts. In this work, we propose a theoretical design achieving four or ten distinct resistance states via electrical control, with a giant tunneling magnetoresistance (TMR) ratio of 1.1×10^4% (11000%). This value surpasses all previously reported MTJs, including experimental systems such as CoFeB/MgO/CoFeB (TMR 65%, 4 states) and theoretical systems like Ga2O3/MgO/Ga2O3 (TMR 1120%, 2 states). The multiferroic barrier enables simultaneous control of ferroelectric and magnetic order parameters, allowing reversible switching between multiple resistance levels without external magnetic fields. Our first-principles calculations reveal that the high TMR arises from spin-dependent tunneling through the barrier, modulated by the ferroelectric polarization direction and magnetization configuration. The device operates with low write energy and exhibits non-volatile retention, making it suitable for high-density storage and in-memory computing. This work establishes a new benchmark for electrically controlled MTJs and provides a practical route to overcome the limitations of current spintronic memory technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3836-8
Flexible energy storage and harvesting devices, as core components of flexible electronic systems, have driven the transformation from external power supply to self-powering and from fixed forms to adaptive configurations, playing a pivotal role in wearable technology and the Internet of Things. MXenes, a class of two-dimensional transition metal carbides, nitrides, and carbonitrides, are promising candidates due to their excellent conductivity, mechanical flexibility, and tunable interfacial characteristics. Specifically, interfacial characteristics—surface energy, surface terminations, and interlayer spacing—decisively influence device performance. This review summarizes the influence of microcosmic interfacial characteristics on macroscopic properties, interfacial regulation strategies, and applications in flexible energy storage and harvesting. It concludes with challenges and perspectives for designing high-performance MXene-based energy devices. Key applications include flexible supercapacitors, batteries, and triboelectric nanogenerators. For instance, pillared Ti3C2 via CTAB pre-pillaring and Sn4+ pillaring regulates interlayer spacing, enhancing ion transport. The review integrates recent advances, such as MXene/nylon scaffolds for dendrite-free zinc anodes and MXene-bonded hard carbon films for sodium/potassium storage, demonstrating improved cycling stability and rate capability. The interfacial engineering strategies discussed provide a roadmap for overcoming stacking issues and achieving high energy density and mechanical robustness.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607007
Printing and dyeing sludge (PDS) fly ash is often classified as hazardous waste due to its high content and diversity of heavy metals (HMs). This study co-disposed PDS fly ash and heavy metal-contaminated soil to produce sintered ceramsites, investigating the effects of sintering conditions on physical properties and HM migration/transformation, and elucidating the immobilization mechanisms. The optimal sintering process was identified as preheating at 400 °C for 10 min, followed by sintering at 1150 °C for 10 min. The resulting ceramsites exhibited a 1-h water absorption of 2.7%, a bulk density of 830 kg/m³, HM volatilization rates below 15%, and a residual fraction (F4) proportion exceeding 86%. Characterization revealed that during sintering, HMs were encapsulated by the glassy phase and reacted with amorphous silica-alumina to form stable silico-aluminates, synergistically reducing HM mobility. However, sintering temperatures ≥1200 °C destabilized the ceramsite structure, causing secondary HM release. This research provides an efficient and simple route for the resource utilization of dyeing sludge fly ash and contaminated soil.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.