SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4267-y
The synthesis of two-dimensional MBenes from MAB-phase ceramics is impeded by uncontrolled etching kinetics that compromise structural integrity and yield. This study introduces a vacuum molten salt strategy to regulate space-charge accumulation during the selective removal of Al from Mo2AlB2, producing honeycomb-like architectures. The vacuum environment suppresses oxidative side reactions and modulates ionic transport, enabling precise control over etching depth and morphology. The resulting Mo2AlB2 exhibits exceptional electromagnetic wave absorption, with a minimum reflection loss of -56.3 dB at 2.4 mm and an effective absorption bandwidth of 6.8 GHz. These metrics surpass conventional etching-derived MBenes by a factor of 2.5 in attenuation capacity. The space-charge-regulated mechanism is elucidated through in situ spectroscopic and computational analyses, revealing that vacancy-induced charge redistribution governs the etching front propagation. This work establishes a scalable route for high-purity MBenes with tailored porosity, addressing critical bottlenecks in energy absorption and catalytic applications. The vacuum molten salt approach eliminates the need for hazardous HF, offering a safer and more environmentally benign pathway for industrial translation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4192-y
Electrochemical water splitting is pivotal for scalable green hydrogen production, yet its practical deployment hinges on cost-effective electrocatalysts with high activity and durability. This study introduces a low-cost, three-dimensional (3D) nanoporous ZrVFeCoNi material fabricated via chemical dealloying, at merely 0.16% of the cost of Pt. The structure-activity relationship between its microstructure and hydrogen evolution reaction (HER) performance was systematically explored. Lattice defect effects from multiphase intermetallic compounds, combined with multi-metal synergy, optimize H+ adsorption energy and electron transfer kinetics. The 3D nanoporous architecture provides a high electrochemical surface area with abundant active sites, enhancing electrolyte penetration and reducing interfacial mass transfer resistance. Consequently, the ZrVFeCoNi electrode exhibits outstanding HER performance, requiring only a 38 mV overpotential to reach 10 mA cm−2 and maintaining stable operation for 1000 h at 500 mA cm−2. Integrated into a full water electrolyzer (ZrVFeCoNi || IrO2/Ni), the system achieves a cell voltage of 1.60 V at a current density of 400 mA cm−2. Advanced characterization and density functional theory (DFT) calculations reveal that interfacial interactions and charge transfer at heterointerfaces drive catalytic activity, showcasing the potential of 3D nano-structured multiphase intermetallic compounds as high-performance electrocatalysts for green hydrogen systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3744-9
The high-value utilization of industrial wastes is critically important for environmental protection and sustainable development. In this work, amorphous NaFeP2O7 (NFPO) and NaFeP2O7/rGO (NFPO/rGO) composite are synthesized via a selective chemical precipitation approach, utilizing industrial jarosite residue as the iron source. The sodium storage performance and mechanism of this amorphous NFPO/rGO composite as a novel cathode material for sodium-ion batteries (SIBs) are explored for the first time. The as-synthesized amorphous NFPO/rGO composite exhibits outstanding long-term cycling performance of 79.1 mAh g−1 after 1000 cycles at 0.1 A g−1, while the crystalline NFPO/rGO composite does not work. Galvanostatic intermittent titration technique and in-situ electrochemical impedance spectroscopy analysis demonstrate that the amorphous NFPO/rGO composite has high Na+ diffusivity and fast kinetics. In-situ X-ray diffraction analysis reveals the structure change from amorphous NaFeP2O7 to triclinic Na2FeP2O7 during the first discharge process and then evolves to a highly disordered structure in the subsequent charge/discharge cycles. The present work not only provides an avenue for the high-value utilization of jarosite residue but also offers theoretical guidance for the structural design and development of NaFeP2O7-based cathode materials for SIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3838-5
Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics, including breathable wearables, on-skin devices, and bio-integrated electronics. However, conventional metallization strategies, such as sputtering and ink-printing, often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks, leading to device short-circuiting, operational failure, and limited vertical integration. Here, we present a solvent-selective dissolution-assisted transfer printing strategy to achieve surface-confined metallization of ultrathin, lightweight, and gas-permeable nanofibrous networks, enabling lateral conductivity while maintaining vertical insulation. This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding. Meanwhile, the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity (2 Ω cm) and vertical insulativity (10^11 Ω cm). The resulting anisotropic conductive networks enable low-voltage wearable heaters, high-sensitive pressure sensors, and ultralight temperature sensors. A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification. The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable, ultrathin, and lightweight wearable electronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026020803
The governance of new pollutants is a major strategic deployment made by China after fully building a moderately prosperous society and embarking on a new journey to comprehensively build a modern socialist country. Guided by the new development philosophy, it adheres to high-quality development, promotes economic structural transformation, and safeguards people's livelihood. This paper divides China's new pollutant governance process from the beginning of the 21st century to 2035 into four progressive stages: compliance-driven local exploration, systematic construction of strategic transformation, comprehensive implementation and in-depth layout, and long-term control and modernization improvement. It systematically reviews the development of management systems, technical standards, and basic research in each stage, clarifying the strategic position of new pollutant governance in coordinating development and security. At the critical transition between the 14th and 15th Five-Year Plans, the paper summarizes achievements and shortcomings based on the implementation of the Action Plan for the Governance of New Pollutants, proposing optimization paths for the 15th Five-Year Plan period. Key recommendations include establishing a national data sharing platform to integrate monitoring, toxicological, and governance data, implementing a diversified evaluation system to distinguish basic research from management support research, and guiding differentiated local implementation to avoid a one-size-fits-all approach. The paper emphasizes the need for international promotion to enhance China's discourse power in global environmental governance, and suggests building a multi-dimensional international communication system. These measures aim to improve the quality and efficiency of new pollutant governance, providing theoretical and practical guidance for building a Beautiful China.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025091205
This study analyzes the spatiotemporal variation characteristics and driving mechanisms of PM2.5, PM10, SO2, NO2, O3, and CO in the Kuytun-Dushanzi-Wusu (Kui-Du-Wu) region of Xinjiang, based on monitoring data from 2018 to 2024. Results indicate that urban sites (e.g., Kuytun Laoganju Station) are influenced by traffic emissions, leading to elevated PM2.5 and NO2 concentrations. Dushanzi District, with petrochemical industry emissions, exhibits notable SO2 and O3 pollution. Agricultural areas (e.g., Kuytun Huaxin Tomato Company) show significant PM10 and CO levels affected by dust and diesel machinery. Over the study period, PM2.5, PM10, NO2, and CO concentrations generally declined at annual rates of 1.5–4.0 μg·m−3·a−1, reflecting the effectiveness of coal substitution, industrial upgrades, and vehicle emission controls. Conversely, O3 concentrations increased consistently at rates of 1.3–3.2 μg·m−3·a−1, highlighting shortcomings in volatile organic compound (VOCs) control. Seasonal patterns show PM and CO peaking in winter due to heating combustion and temperature inversions, and reaching minima in summer due to enhanced diffusion and precipitation. O3 peaks in summer driven by photochemical reactions, contrasting with NO2 winter highs from heating and industrial activities. The findings underscore the need for coordinated control of VOCs and NOx, optimized dust management, and differentiated emission controls for industrial, traffic, and agricultural sources.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605007
Reservoirs are significant sources of nitrous oxide (N2O), a potent greenhouse gas. The nosZ-type denitrifying bacteria, which reduce N2O to inert N2, play a critical role in mitigating emissions. This study investigated the community structure, diversity, and abundance of nosZ-type denitrifiers in surface sediments (0-15 cm) from 18 reservoirs in the northeastern Qinghai-Tibet Plateau, including 10 in the Yellow River mainstem and 8 in the Huangshui River basin. Sampling occurred during dry (May 2023) and wet (August 2023) seasons. High-throughput sequencing of the nosZ gene and quantitative PCR were employed. Results showed that Proteobacteria dominated (78.91%). Paracoccus and Halomonas were biomarkers in the Yellow River mainstem. Diversity was significantly higher in the Huangshui basin (P<0.05), with no temporal difference. Gene abundance was higher in the Huangshui basin (165.24×10^5 copies/g) than in the Yellow River mainstem (34.43×10^5 copies/g), and higher in wet season (128.55×10^5 copies/g) than dry season (61.27×10^5 copies/g) (P<0.05). Redundancy analysis and hierarchical partitioning identified sediment temperature, pH, total phosphorus, and water total nitrogen as key drivers, explaining 17.14%, 16.89%, 13.83%, and 11.23% of community variation, respectively. These findings reveal significant spatiotemporal heterogeneity and provide a scientific basis for N2O mitigation in plateau reservoirs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506064
To address the challenges of high salinity, recalcitrance, limited mass transfer, and coating detachment in traditional anodes for textile wastewater treatment, a porous RuO2@r-TiO2 nanotube array (NTA) anode was fabricated via anodic oxidation, electrochemical reduction, and thermal decomposition. A flow-through electrochemical oxidation system was constructed using this anode and a graphite felt cathode. The material's morphology and physicochemical properties were characterized by SEM, XRD, and XPS. Congo red (CR) was used as a model pollutant to evaluate degradation performance under various conditions. Optimal conditions were identified as current density 5 mA·cm−2, permeate flux 480 L·(m2·h)−1, initial CR concentration 0.15 mmol·L−1, and NaCl concentration 75 mmol·L−1. Under these conditions, the system achieved 91% decolorization within 20 min and 82% mineralization within 60 min. Mass transfer tests showed a rate constant of 2.23×10−4 m·s−1 in flow-through mode, three times higher than conventional mode, with active chlorine and H2O2 production increased by 32.8% and 66.7%, respectively. Radical quenching experiments indicated that singlet oxygen (1O2) was the primary reactive species. The degradation mechanism was proposed based on quenching and UV spectral analysis. The system achieved >90% decolorization for five typical dye pollutants with an energy consumption of only 0.16 kWh·m−3. Cyclic voltammetry confirmed long-term stability. These findings provide theoretical support for applying electrochemical advanced oxidation to high-salinity textile wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509124
To reveal the spatiotemporal evolution and driving mechanisms of water quality in the Hanjiang River Basin, this study utilized monthly water quality monitoring data from 54 sections from January 2021 to April 2024. Methods including single-factor index, comprehensive water quality index (WQI), principal component analysis (PCA), and optimal parameters-based geographical detector (OPGD) were employed. Results indicated significant spatiotemporal differences, with total nitrogen (TN), chemical oxygen demand (COD), and permanganate index (CODMn) as major pollutants, TN being the most critical. Temporally, agricultural non-point source organic pollution dominated in wet season, while comprehensive organic pollution with industrial point source characteristics prevailed in dry season. Spatially, water quality deteriorated along the main stream, with tributary downstream areas showing severe pollution, forming a pattern of 'mountainous areas good, plains poor'. OPGD revealed combined effects of natural conditions and human activities, proposing a 'zonal control and targeted treatment' strategy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4006-4
Hydrogels, despite their potential in flexible electronics and wearable sensors, often suffer from inadequate mechanical robustness under sustained loading. This study aims to overcome this limitation by developing a novel nanocomposite hydrogel system through the integration of calcium-polyoxometalate sub-nanometer wires (Ca-POM SNWs) into a polyvinyl alcohol (PVA) matrix. Utilizing a H2O/ethylene glycol (EG) binary solvent, the hydrogel achieves uniform dispersion of Ca-POM SNWs, which enhances mechanical properties through dual reinforcement mechanisms: stress dissipation via polymer-mimetic flexibility and crystallinity improvement via hydrophobic ligand-induced chain alignment. The resulting PVA/Ca-POM hydrogel exhibits exceptional performance, including a 2.4-fold increase in fracture stress (0.85 MPa), 3.8-fold toughness enhancement (2.76 MJ m−3), and high ionic conductivity (3.6 S m−1). As a strain sensor, it achieves a gauge factor of 2.56 with rapid response, enabling precise detection of both large joint movements and subtle physiological vibrations. A prototype Morse code communication system further demonstrates its potential in assistive healthcare technologies, facilitating barrier-free, real-time communication between disabled patients and clinicians. This work highlights a breakthrough in inorganic-organic interface compatibility, offering a versatile platform for next-generation wearable technologies and extreme-environment applications. The innovative design principles and multifunctional performance underscore its significance in advancing soft material engineering.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512025
Persulfate (PS) is a common oxidant in in-situ chemical oxidation (ISCO) for groundwater organic contamination, but its vertical concentration stratification may lead to inefficient remediation of light non-aqueous phase liquids (LNAPLs). To investigate the vertical stratification characteristics of PS in porous aquifers and its impact on LNAPLs remediation, static water column experiments and flowing water sand tank experiments were conducted. The migration behavior of PS under non-slow-release and slow-release conditions was compared, with Br− as a reference tracer and benzene, toluene, and xylene (BTX) as LNAPLs contaminants. Results showed that in static water columns, Br− exhibited weak vertical migration, short migration distance, and a low decay rate (0.009 d−1), consistent with a stable tracer. In contrast, PS showed strong vertical migration, with concentrations increasing with depth; under slow-release conditions, the concentration difference between the top and bottom of the column could reach two orders of magnitude. Br− migration was dominated by molecular diffusion (effective diffusion coefficient 2.2×10−9 m2·s−1), while PS migration was driven by both diffusion and density. Under slow-release conditions, the average PS decay rate was 0.072 d−1, slightly higher than the non-slow-release rate (0.059 d−1). In both column and sand tank experiments, BTX exhibited a distinct shallow-layer distribution, contrasting with PS. When the aquifer thickness is large, PS stratification limits its contact with LNAPLs contaminants, increasing remediation cost and difficulty. These findings provide theoretical reference for PS-based ISCO remediation of LNAPLs in porous aquifers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4044-3
Efficient sequestration of radioactive iodine species (I2, CH3I, I3−) is vital for nuclear safety and environmental protection. However, developing multifunctional adsorbents that remain effective under diverse conditions remains a significant challenge. Herein, we report two functionalized PD-COFs (PD-WS and PD-WY) with moderate crystallinity, outstanding thermal stability, and robust chemical resistance. They exhibit superior adsorption performance in both gas and liquid phases. Specifically, at 75°C, PD-WY achieves capacities of 4.88 g g−1 for I2, 1.55 g g−1 for CH3I, and 5.55 g g−1 for the I2/CH3I mixture, while high capacities are also retained at room temperature. In solution, PD-WY adsorbs up to 3.56 g g−1 of I3− in water and 2.00 g g−1 of iodine in cyclohexane. These COFs display rapid kinetics (K80% = 3.25 g g−1 h−1 for I2 and 7.89 g g−1 h−1 for I3−) and excellent selectivity. Mechanistic studies indicated that the excellent iodine affinity of PD-COFs arises from their rich electronic structures, abundant active sites, and charge transfer interactions. These findings position PD-COFs as highly promising adsorbents for nuclear waste treatment and environmental remediation.