SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4106-8
Perovskite/organic tandem solar cells (PO-TSCs) have emerged as a compelling photovoltaic architecture to transcend the Shockley-Queisser limit of single-junction devices. By monolithically stacking a wide-bandgap (WBG) perovskite top cell and a narrow-bandgap (NBG) organic bottom cell, PO-TSCs enable broad spectral utilization and reduced thermalization loss, offering a viable pathway toward efficiencies beyond 30%. Their solution processability, compatibility with orthogonal solvents, and potential for lightweight, flexible, and semi-transparent modules further make them attractive for building integrated and portable electronics. However, the realization of high-performance PO-TSCs critically depends on precise carrier regulation across the entire multilayer stack, where inefficient charge transport, recombination losses, and interfacial bottlenecks often limit the overall power conversion efficiency (PCE) and stability. This review systematically examines the carrier-regulation strategies essential for advancing PO-TSCs, focusing on defect and phase-control in WBG perovskites, the design of optically transparent and electrically efficient interconnecting layers, and the enhancement of charge generation and collection in organic subcells. The integration of these approaches has recently enabled efficiencies exceeding 26%, demonstrating the rapid progress of the field. Ultimately, we conclude with an outlook on the remaining challenges in scalability, operational stability, and manufacturability, providing a roadmap for future research toward commercially viable tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3762-9
The integration of interfacial photothermal conversion and hydrovoltaic effects into bifunctional evaporators offers a promising route to simultaneously address freshwater scarcity and energy demands. However, the development of low-cost bifunctional evaporators and elucidation of the underlying co-generation mechanism remain challenging. Here, we report a porous carbon derived from waste polyester via a metal-organic framework (MOF)-assisted carbonization strategy, which is subsequently fabricated into a bifunctional evaporator for freshwater and hydroelectricity co-generation. The porous carbon exhibits a high specific surface area of 904 m² g⁻¹, hierarchical micro- and mesopores, and abundant oxygen-containing groups. The resulting evaporator demonstrates broadband light absorption, localized thermal management, good hydrophilicity, and high flexibility. Under 1 sun illumination, it achieves an open-circuit voltage of 250 mV, a short-circuit current of 14 μA, and an evaporation rate of 2.34 kg m⁻² h⁻¹, ranking among the most efficient freshwater-hydroelectricity co-generators. The weakened hydrogen-bonding network reduces the water evaporation enthalpy to 1.7 kJ g⁻¹. Mechanistic studies, including molecular dynamics simulations, reveal that selective Na⁺ interaction induces differential ion migration rates, generating a streaming potential. Additionally, the photothermal effect enhances voltage output by promoting interfacial ion concentration gradients. Outdoor tests confirm stable voltage output of 250 mV and freshwater production of 2.34 kg m⁻². This work provides a scalable platform for fabricating advanced evaporators from waste plastics and unravels the co-generation mechanism, offering a sustainable strategy to mitigate freshwater and energy crises.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511051
Photosynthetic bacteria (PSB) wastewater treatment technology is promising for simultaneous pollutant removal and resource recovery (e.g., single-cell protein, hydrogen). However, poor cell hydrophobicity and aggregation lead to low biomass retention and short sludge retention time, hindering engineering application. This study investigated the driving role and mechanism of upflow velocity as a key hydraulic selection pressure on PSB granulation under stepwise increasing organic loading rate (OLR). In laboratory up-flow photobioreactors (UPBR), comparative experiments were conducted with macro-index monitoring and micro-mechanism analysis. Results showed that under high upflow velocities of 3.00–6.30 m·h−1, PSB granular sludge with an average diameter of 285.58 μm and excellent settleability (sludge volume index, SVI = 22.73 mL·g−1) was successfully formed within approximately 60 days. Compared to the control, the granules in the experimental group were larger, with clear boundaries and compact structure, and significant enrichment of filamentous bacteria was observed. Mechanism analysis indicated that OLR provided nutritional driving force for microbial growth, while upflow velocity supplied high hydraulic shear force, physically screening and enriching settleable aggregates, and specifically inducing secretion of hydrophobic tryptophan-like proteins and humic acids (key extracellular polymeric substances, EPS). Additionally, core genera such as Xanthobacteraceae, possessing stress tolerance and EPS secretion functions, were enriched. This study reveals a chain mechanism of 'physical selection–biological response' centered on hydraulic selection, demonstrating that upflow velocity is a key controllable factor for PSB granulation, providing theoretical basis and technical pathway for solving PSB biomass washout and promoting resource-oriented treatment of high-strength organic wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3925-5
Capacitive pressure sensors have garnered significant attention in electronic skin, human-machine interaction, health monitoring, and medical devices due to their remarkable properties like highly sensitive pressure perception, good repeatability, and rapid response capabilities. However, manufacturing capacitive pressure sensors that simultaneously achieve a broad linear detection range and high sensitivity remains a significant challenge. Herein, a novel hierarchically interlocked capacitive pressure sensor (HI-CPS) was designed by integrating a stretchable polyethylene glycol (PEG)-based nanofilm dielectric layer with hierarchically interlocked microstructures, demonstrating excellent linearity and high sensitivity over a wide sensing range. HI-CPS based on a one-layer nanofilm exhibits ultrahigh sensitivity (9.40 kPa−1) and an ultralow detection limit (0.1 Pa). When the dielectric layer comprises two layers of stacked nanofilms, the sensor not only maintains high sensitivity (3.17 kPa−1) but also achieves excellent linearity (R2 = 0.999) over a broad working range (<5 kPa), along with remarkable stability even after 10,000 cycles. Benefitting from the outstanding comprehensive performance, HI-CPS has been proven to be successfully implemented in monitoring various human biological signals, sign language recognition, and basketball shooting gesture correction. This strategy of assembling the tailored nanofilm with structural engineering has significant potential application in building high-performance pressure detection and recognition devices.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026050701
Azo food colorants are persistent aquatic pollutants posing risks to ecosystems and human health. Utilizing biomass waste to produce low-cost activated carbon offers a sustainable strategy for their removal. In this study, activated carbon (HPR-AC) was synthesized from Haematococcus pluvialis residue via phosphoric acid activation, and its adsorption performance was evaluated using Sunset Yellow (SY), Ponceau 4R (P4R), and Tartrazine (TY) as model pollutants. The effects of solution pH, adsorbent dosage, initial dye concentration, and temperature on adsorption efficiency were systematically examined. Characterization by BET, FTIR, XRD, and XPS revealed that HPR-AC possesses a high specific surface area and an abundant mesoporous structure. The adsorption process was well described by the Langmuir isotherm and pseudo-second-order kinetic models, indicating monolayer chemisorption and an endothermic nature. At pH 5 and 55 °C, the maximum adsorption capacities reached 67.12, 79.72, and 72.75 mg·g−1 for SY, P4R, and TY, respectively. Statistical physics modeling further suggested a multilayer physical adsorption mechanism, primarily governed by pore filling, electrostatic interactions, hydrogen bonding, π-π stacking, and charge transfer. These findings provide both theoretical insights and empirical data for the valorization of H. pluvialis residue and the development of efficient, sustainable adsorbents for azo dye removal from water.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608021
To address the significant increase in fine particulate matter (PM2.5) and its chemical component concentrations caused by the concentrated setting-off of fireworks and firecrackers during the Spring Festival in Yancheng City, this study introduced the Bayesian-optimized XGBoost model (BO-XGBoost) based on PM2.5, particulate component, and meteorological observation data. The model simulated non-setting-off baseline concentrations using meteorological factors as independent variables, enabling quantitative assessment of setting-off contributions. Results showed that the concentrated setting-off exerted significantly differentiated effects on various pollutants. Among water-soluble ions, K+ and Mg2+ were core characteristic tracers, with concentrations reaching 15.89 and 20.08 times baseline levels on Lunar New Year's Eve, directly reflecting high-intensity emissions. Secondary conversion ions such as SO4^2- and NO3^- showed sustained high contributions on both Lunar New Year's Eve and the fifth day of the first lunar month, reflecting cumulative effects of atmospheric chemical transformation. Among inorganic elements, K, Ba, and Sr were core characteristic tracers, with concentrations showing explosive growth on Lunar New Year's Eve, serving as direct fingerprints of fireworks. Elements such as Pb and Mn were also significantly affected, reflecting direct heavy metal emissions. Temporal comparisons indicated that emission intensity on Lunar New Year's Eve was significantly higher than on the fifth day, with increased proportional contribution of secondary conversion processes on the fifth day. The study achieved accurate quantification of setting-off contributions through a data-driven model, clarifying pollution fingerprint characteristics and temporal differentiation patterns, providing scientific basis for air quality management and policy optimization during the Spring Festival.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4080-y
M1 macrophages (M1φ) are pivotal drivers in the progression from non-alcoholic fatty liver (NAFL) to non-alcoholic steatohepatitis (NASH). Longitudinal monitoring of intrahepatic M1φ could facilitate non-invasive diagnosis of NASH, yet achieving specific and sensitive in vivo imaging of M1φ remains challenging due to the nonspecific phagocytic activity common to all phenotypic macrophages. In this study, we developed a dual-target-recognizing photoacoustic nanoprobe that can target glucose transporters (GLUTs) and be selectively activated by nitric oxide (NO). Benefiting from its enhanced affinity for M1φ and decent responsive capability to NO, the probe exhibited favorable imaging performance toward M1φ in ex vivo experiments. Following systemic administration in diabetic mice, the probe rapidly accumulated in the liver, where it was selectively internalized by M1φ via specific recognition between glucose molecules and GLUTs, further inducing a NO-triggered enhancement of the photoacoustic signal. Distinct photoacoustic signal enhancement patterns were observed between NAFL and NASH livers, enabling non-invasive in vivo discrimination of NASH. This study proposes a novel strategy using a dual-target-recognizing probe to improve the selectivity and sensitivity of in vivo M1φ imaging, while also providing new insights for the non-invasive diagnosis of NASH.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4071-3
The low survival rate and compromised functionality of β cells present significant obstacles in islet transplantation for diabetes management. Recent studies indicate that the sensitivity of β cells to their microenvironment may be a contributing factor. In this study, Biotin-DFYIGSRGD hydrogel (Supragel) was employed to replicate the microenvironment of mouse β cells (MIN6 cells) and human islets, enhancing cell viability, functionality, and structural integrity. Compared with conventional two-dimensional cell culture methods utilizing cell plates, MIN6 cells cultured on the gel adhered and self-organized into cell spheroids, resulting in increased synthesis of insulin and glucagon. Furthermore, the hydrogel effectively preserved the integrity of human islets and extended their in vitro culture period. This improvement may be attributed to the optimal hardness of the gel, which facilitated cell adhesion and promoted vascularization. Additionally, the gel exhibited sustained in vivo retention over 120 days, undergoing gradual degradation without eliciting significant inflammatory responses. These properties establish it as a promising encapsulation material for pancreatic islet cells or organoids, supporting long-term cell survival, function, and integration with host tissues. The study highlights the potential of Biotin-DFYIGSRGD hydrogel as an islet culture platform for diabetes treatment.