SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3660-5
High-sensitivity piezoelectric ceramics with high piezoelectric constants (d33) are crucial for miniaturized, low-power, and high-efficiency transducers. However, conventional performance enhancement relies on intrinsic parameter modulation, which is limited and blind. This study introduces a performance-driven metamaterials creation model to develop structure-function-integrated piezoelectric materials. We systematically investigated the effects of metastructure design on d33 across two-dimensional straight rod (SR) structures, three-dimensional dot-matrix (Octa) structures, complex triply periodic minimal surface (TPMS) structures, and hybrid Octa&SR structures. The results demonstrate that metastructures combining high polarization charge conversion efficiency with low compression modulus (stiffness) effectively enhance d33. The SR structure exhibited optimal polarization charge conversion, the Fks-Shellular (FksS) structure within TPMS showed low stiffness, and the Octa&SR structure combined both properties. Notably, all three structures displayed exceptional piezoelectric performance. Specifically, the FksS structure achieved a substantial d33 of 194 pC/N, a 24% enhancement over conventional solid BaTiO3, while maintaining isotropic and stress-insensitive properties. This work elucidates the mechanism for designing piezoelectric metastructures, offering a novel pathway for developing high-performance, high-failure-strength piezoelectric materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3585-1
Semiconductor-based surface-enhanced Raman scattering (SERS) substrates have attracted significant attention due to their high uniformity, reproducibility, stability, and cost-effectiveness. However, the Raman enhancement in semiconductors primarily relies on the chemical mechanism (CM), which typically results in a lower enhancement capability compared to traditional noble metals. In this study, we developed a novel two-dimensional (2D) SERS substrate, Ag2Te nanosheets (NSs), synthesized through a simple one-step redox reaction utilizing 2D Te NSs as the template. The 2D Ag2Te NSs not only exhibit strong interfacial interactions with molecules, thereby supporting the CM, but also possess quasi-metallic properties with low resistivity (2.8 × 10−4 Ω cm) and high density of free electrons (4.15 × 10^22 cm−3), giving rise to a significant visible-region surface plasmon resonance (SPR) band and contributing to enormous electromagnetic mechanism (EM). By synergizing CM and EM, the 2D Ag2Te NSs SERS substrate achieved an ultra-low limit of detection (LOD) of 10−10 M with an enhancement factor (EF) of 2.6 × 10^7 for methylene blue (MB), outperforming most semiconductors, even rivaling noble metals. The quasi-metallic properties of 2D Ag2Te NSs also benefit their sensitivity to multiple molecules. The accuracy and reliability were demonstrated in real-sample detections with recoveries of 91.5%–108.3% for various target molecules. These excellent performances, combined with remarkable cost-effectiveness, demonstrate the potential of 2D Ag2Te NSs as a practical SERS substrate with broad applicability. Furthermore, the inherent structural simplicity of these nanosheets creates significant opportunities for further sophisticated nanostructural engineering to advance the SERS performance in the future.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3657-9
Perovskite/silicon tandem solar cells (TSCs) have achieved power conversion efficiencies (PCE) up to 34.9%, surpassing the Shockley-Queisser limit of single-junction devices. The interconnection layer (ICL) critically bridges top and bottom subcells, enabling charge carrier recombination. Conventional indium oxide (In2O3)-based TCOs suffer from high-energy ion bombardment during sputtering, damaging amorphous silicon subcells and reducing open-circuit voltage (VOC) and fill factor (FF). Additionally, indium scarcity and cost necessitate indium-free alternatives. Here, we introduce a highly degenerate indium-free samarium-doped cadmium oxide (CdO:Sm) TCO as the ICL for perovskite/SHJ TSCs, deposited via low-damage reactive plasma deposition (RPD). The ultrathin CdO:Sm film (~3 nm) exhibits average transmittance of 85% (400–1200 nm) and 90% (800–1200 nm), enabling efficient near-infrared absorption in the bottom subcell. High doping concentration and mobility ensure excellent electrical conductivity. The low work function (4.04 eV) of CdO:Sm facilitates carrier tunneling and efficient recombination. Devices employing CdO:Sm ICL achieved approximately 1% higher efficiency compared to those with indium-based TCO ICLs. Detailed characterization including contact resistivity (1.68 mΩ cm2), conductive atomic force microscopy, Kelvin probe force microscopy, and photoluminescence quenching confirm enhanced carrier transport and extraction. This work demonstrates a viable indium-free ICL for high-efficiency perovskite/SHJ TSCs, addressing both performance and sustainability challenges.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3773-7
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells suffer from significant open-circuit voltage (VOC) deficits due to severe interfacial and bulk recombination, restricting their power conversion efficiency (PCE) far below the Shockley-Queisser limit. This work proposes a low-temperature annealing strategy during ITO sputtering (SA) to synergistically address these challenges. The temperature applied during ITO sputtering not only improves the crystallinity, carrier concentration, and optical transmittance of the ITO layer but also promotes the diffusion of In from ITO into both CdS and CZTSSe layers. Consequently, lattice matching at the CZTSSe/CdS interface is optimized, enabling epitaxial growth. And a favorable ITO/In:CdS/In&Cd:CZTSSe structure with optimal band alignment is obtained. As a result, a champion device with a PCE of 14.29% was achieved. The SA-treating also enabled the CZTSSe solar cells to achieve the highest VOC reported to date, exceeding 590 mV. This underscores the essential role of SA processing in optimizing interface engineering and suppressing defects, thus promoting the development of low-cost, high-performance kesterite photovoltaics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112104
Carboxyl-modified polystyrene microplastics (PS-COOH) are negatively charged particles formed by surface oxidation and functional group modification of polystyrene microplastics (PS), widely used in biomedical and analytical chemistry. However, studies on their neurotoxic effects on aquatic organisms are scarce. This study employed zebrafish (Danio rerio) as a model organism, exposing embryos to environmentally relevant concentrations (0.1, 1, 10, 100 μg·L−1) of PS and PS-COOH. Neurotoxic effects were assessed by measuring tail coiling frequency at 24 hpf and swimming velocity under alternating light/dark cycles at 120 hpf. Results demonstrated that both PS and PS-COOH induced neurotoxicity, with PS-COOH significantly reducing tail coiling frequency and average swimming speed compared to PS (P<0.05). Exposure to 10 μg·L−1 PS-COOH disrupted neurotransmitter homeostasis, altering levels of acetylcholine (ACh), serotonin (5-HT), and γ-aminobutyric acid (GABA). Transgenic zebrafish Tg(huc:EGFP) fluorescence assays revealed that PS-COOH (0.1–100 μg·L−1) caused damage to central neurons. These findings indicate that PS-COOH exposure impairs cholinergic, serotonergic, and GABAergic neurotransmission, induces neuronal damage, and exerts neurotoxic effects on zebrafish larvae. This study provides a theoretical basis for assessing the ecological and health risks of modified microplastics.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604024
To enhance sludge dewatering efficiency, an MnFe2O4/BC/PMS system was constructed for sludge disintegration. Single-factor and multi-factor experiments were conducted to investigate the effects of MnFe2O4/BC (MFB) dosage, PMS dosage, and reaction time on sludge dewatering performance, establishing the optimal process parameters and the primary-secondary relationships among environmental factors. Active species identification in the MnFe2O4/BC/PMS system revealed the main free radicals responsible for sludge disintegration and the primary pathways of EPS breakdown. Results showed that the influence order of environmental factors on sludge moisture content (Wc) and total organic carbon (TOC) was MFB > PMS > reaction time, while the interaction effects followed MFB-PMS > PMS-reaction time > MFB-reaction time. Optimal dewatering occurred at MFB dosage of 132.99 mg/g DS, PMS dosage of 421.80 mg/g DS, and 18 min reaction time, achieving Wc of 45.8% and TOC of 489.2 mg/L. The ·OH and SO4−· radicals released from MnFe2O4/BC-activated PMS oxidized protein main chains, causing peptide chain breakage. This primarily reduced protein content in sludge from 174.6 mg/L to 75.7 mg/L, with TB-EPS protein content decreasing from 91.8 mg/L to 36.3 mg/L, thereby reducing EPS hydrophilicity and improving sludge dewatering efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3485-0
Aqueous Zn-ion batteries (AZIBs) are promising for next-generation energy storage due to high safety and low cost, but their practical use is limited by Zn dendrite growth and side reactions. An ideal anode/electrolyte interphase should block water contact while enabling fast Zn2+ transport, yet conventional thick interphases increase ionic resistance and polarization. Here, we report a hydrophobic yet ultrathin (~5 nm) polydimethylsiloxane (PDMS) artificial interphase fabricated via conformal coating. The oxygen-rich PDMS layer selectively coordinates Zn2+ while its superhydrophobicity excludes water, and the ultrathin nature enables rapid Zn2+ conduction, enhancing the Zn2+ transference number by 2.28-fold. This synergistic design suppresses dendrites and mitigates hydrogen evolution. The PDMS-modified anode achieves 99.9% Coulombic efficiency over 3500 cycles, 880-hour symmetrical cell operation at 60% depth of discharge, and 2500-cycle full-cell endurance under lean Zn conditions (N/P ratio 5.7). Proof-of-concept pouch cells sustain 1400 cycles with a 0.01% decay rate. This molecular-scale interphase strategy provides a feasible pathway toward practical AZIB implementation.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605006
Military ecological and environmental protection is a critical component of national ecological and environmental protection. Military activities and operations, such as training and drills, weapons and equipment testing, and combat, are prone to triggering a series of ecological and environmental problems, including greenhouse gas emissions, deterioration of water resources and water quality, vegetation destruction, land degradation, and typical physical and chemical pollution, which have attracted extensive global attention. This study systematically analyzed the eco-environmental impacts of military activities on multiple environmental media (atmosphere, water, and soil) across different periods, and conducted pollution source tracing in multi-media and representative regions. It reviewed the current status of ecological and environmental protection technologies for the three major environmental media, i.e., atmosphere, water, and soil, and summarized the characteristics and constraints of military ecological and environmental research. Finally, it proposed the research trends and key development directions for military ecological and environmental protection from four dimensions: data monitoring and sharing, research and development of in-situ remediation technologies for military-civilian integrated combined pollution, green construction practices for military facilities, and optimization of management systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605015
The national greenhouse gas voluntary emission reduction trading market was relaunched in 2023, with China Certified Emission Reduction (CCER) as the trading unit, serving as a crucial supplement to the national carbon market. The initial phase includes the offshore wind power sector. This study evaluates the CO2 and air pollutant emission reduction effectiveness and economic feasibility of China's offshore wind power industry under the CCER mechanism. Using CCER methodology, baseline scenario analysis, and empirical data from 2020 and projections for 2025, we quantify reductions in CO2 and principal air pollutants (particulate matter, sulfur dioxide, nitrogen oxides) across coastal provinces. Emission inventories are constructed using authoritative grid emission factors. Economic viability is assessed by integrating levelized cost of electricity (LCOE), additional revenues from CCER transactions, and external environmental benefits. Results provide four policy insights: (1) The sector shows a positive trend in emission reduction and economic-environmental contribution, but faces financial deficit risk by 2025 without CCER subsidies; (2) Economically developed coastal provinces exhibit greater development potential; (3) Profitability analysis for 2020 and 2025 indicates sustainable economic returns with appropriate policy support; (4) Among air pollutants, nitrogen oxides reduction is largest, while sulfur dioxide reduction yields the most significant co-benefits. This study offers evidence-based recommendations for strategic planning and policy formulation in China's offshore wind industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3830-6
Controlled fabrication of artificial multiple-stranded helices is central to deciphering chirality complexity and hierarchical self-assembly processes. Inspired by biological helical nanostructures, we designed a twisted figure-of-eight chiral macrocycle (M1) from pyrene and benzene diimide subcomponents to direct hierarchical assembly of double- and quadruple-stranded superhelices. Single-crystal X-ray diffraction reveals that M1 undergoes charge-transfer and CH···π interactions-driven helical wrapping, forming right-handed (P) single strands that intertwine into quadruple π-helical superstructures. Crucially, the macrocycle's adaptive cavity and interstitial voids could bind electron-deficient naphthalene diimide (NDI) guests through charge transfer interactions, triggering transformation to left-handed (M) double helices. This structural shift induces helicity inversion and optical anisotropy changes, demonstrating a rare case of crystalline-state multiple-helix conversion with supramolecular chirality inversion. This work establishes a template-free methodology for synthesizing multiple-stranded π-helices and controlling their transformations through supramolecular engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3859-y
Photocatalytic CO2 reduction is an attractive route to address sustainable energy crises and environmental issues, yet its efficiency is limited by poor charge separation, narrow light absorption, sluggish kinetics, and low CO2 adsorption/activation. Here, a series of Co SA-TT-COF/CdS S-scheme heterojunction photocatalysts were synthesized by integrating Co single atoms (Co SA) decorated covalent organic frameworks (COFs) with CdS nanotubes via in situ condensation and post-modification. The TT-COF layer thickness on CdS was regulated to optimize active site density and accessibility. The optimal Co SA-TT-COF/15 wt% CdS heterojunction, with a TT-COF thickness of 50.5 nm, achieved a CO production rate of 14157 μmol g−1 h−1 and a selectivity of 90.9%, among the best COF-based photocatalysts reported. Theoretical calculations, experiments, and femtosecond transient absorption spectroscopy revealed that the S-scheme heterojunction enhances the built-in electric field, optimizes energy levels, narrows bandgaps, extends light harvesting, improves charge separation and transfer kinetics, and lowers energy barriers for CO2 adsorption/activation, directly contributing to superior performance.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3631-1
Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.