SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4177-3
Chirality profoundly influences tumor therapy by regulating key physiological processes, yet the link between chirality and therapeutic properties of atomically precise metal nanoclusters (NCs) remains poorly understood. Atomically precise Au25 NCs protected by chiral cysteine ligands (L-Au25(cys)18, D-Au25(cys)18, and Rac-Au25(cys)18) were constructed and systematically investigated to elucidate the association between chirality and tumor therapeutic performance. Although no significant difference in enzyme-like activity was observed among the three NCs, Rac-Au25(cys)18 exhibited enhanced reactive oxygen species generation under 808 nm laser irradiation, achieving superior phototherapeutic effects in both in vitro and in vivo tumor models. The chiral Au25 NCs induced distinct cell death pathways: L-Au25(cys)18 primarily triggered ferroptosis, D-Au25(cys)18 induced both ferroptosis and apoptosis, and all three NCs activated disulfidptosis. In vivo, tumor inhibition rates for L-Au25, D-Au25, and Rac-Au25 groups were 46.7%, 42.5%, and 68.3%, respectively, with no significant body weight fluctuations and minimal hepatorenal toxicity. Hematological and histopathological analyses confirmed favorable systemic biocompatibility. This work clarifies the correlation between chiral structures and tumor therapeutic performance of gold NCs, providing experimental insights and theoretical support for the design of novel chiral nanomaterials and optimization of precise tumor phototherapeutic strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4261-2
Developing ion exchange membranes with both high proton conductivity and high selectivity is crucial for vanadium redox flow batteries (VRFBs). Commercial Nafion membranes suffer from severe vanadium crossover, while conventional additives often aggregate, disrupting ion domains and significantly reducing proton conductivity. To overcome this conductivity–selectivity trade-off, we propose a modification strategy based on molecular-level functional strategy. Two complementary additives, polyvinylpyrrolidone (PVP) and a fluoroalkyl-grafted polyoxometalate cluster (8FSiW11), are introduced into Nafion matrix to achieve precise, cooperative, regulation of ionic domains. PVP fills ion domains via hydrogen bonding and electrostatic interactions, constructing an efficient barrier against vanadium ions. Simultaneously, 8FSiW11 anchors at the hydrophilic/hydrophobic interface, providing additional proton sources and hopping sites to compensate for proton neutralization by PVP. The resulting hybrid membrane exhibits a proton/vanadium selectivity of 1×10^6 S min cm^-3, 8.6 times higher than commercial Nafion 212 (NR212), and enables VRFB energy efficiencies (EE) of 88.9% at 100 mA cm^-2 and 83.2% at 200 mA cm^-2. This work demonstrates the potential of synergistic molecular modification strategy to break conductivity–selectivity trade-off in membrane design for next-generation high-performance VRFBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4108-1
Heterogeneous catalysis underpins modern energy conversion, chemical manufacturing, and environmental remediation, yet its advancement is constrained by the scarcity and cost of noble metals. A sustainable alternative lies in activating intrinsically inert sites in earth-abundant materials such as transition metal oxides and carbon-based materials. This review systematically outlines recent advances in activating inert sites within low-cost catalytic materials. We begin by dissecting the physicochemical origins of catalytic inertness, including local atomic symmetry, electronic spin states, and coordination environments. Subsequently, we elucidate mechanisms by which multi-scale strategies—structural engineering, quantum state engineering, and microenvironment engineering—break symmetry, modulate spin states, and construct unique reaction microenvironments, transforming spectator atoms into highly efficient active centers. The review highlights performance breakthroughs in key reactions such as oxygen evolution reaction (OER) and alkane dehydrogenation, where catalytic metrics now rival or surpass noble metal benchmarks. For instance, triangular-ordered Co atoms achieve ampere-level hydrogen production, and tensile strain engineering activates inert non-defect Bi sites for CO2 electroreduction. We critically assess challenges—stability, scalable synthesis, and cost-effectiveness—that hinder industrial translation. Future directions emphasize multi-strategy synergy and artificial intelligence-assisted rational design. This review provides theoretical guidance and technological pathways for subverting noble-metal-dependent paradigms and developing next-generation efficient, low-cost catalytic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3642-4
High-density glass scintillators are promising alternatives to crystals for next-generation radiation detection due to their low cost, excellent physical and chemical stability, and processability. In this study, a series of Ce3+-activated gadolinium gallium borosilicate (GGBS x) glasses were synthesized via vacuum melt-quenching. With increasing Gd2O3 content, glass density increased from 5.86 to 6.05 g/cm3, and molar volume from 36.43 to 39.79 cm3/mol. Extended X-ray absorption fine structure (EXAFS) analysis revealed that in GGBS 1 glass, Ce3+ exclusively adopts a hexahedral [CeO6] configuration, while Gd3+ exhibits both hexahedral and octahedral coordination with a bond length of 2.35±0.1 Å and Debye-Waller factor σ2 of 0.0122±0.0015 Å2. As Gd2O3 content increased, shallow trap depth rose from 0.804 to 0.858 eV, while deep trap depth first increased from 0.948 to 1.434 eV then decreased to 1.010 eV. GGBS 1 glass exhibited high transmittance (~80%) in the visible range and a photoluminescence quantum yield of 78.4%. Under X-ray irradiation, its X-ray excited luminescence intensity reached 128.5% of that of Bi4Ge3O12 (BGO) crystal, with a spatial resolution of 29.1 lp/mm, approaching the highest reported for glass scintillators. Under γ-ray excitation, it achieved a light yield of 1058 photons/MeV and an energy resolution of 23.7% at 662 keV. These results indicate that GGBS 1 glass scintillator warrants further development for applications in X-ray imaging and γ-ray spectroscopy.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112103
Coal-fired boilers are significant anthropogenic sources of metal emissions, contributing over half of certain toxic heavy metal releases. Metal stable isotopes have been widely applied to trace metal pollutants from coal-fired power plants and other sources. However, complex physicochemical processes within boilers induce isotopic fractionation between raw coal and combustion products, complicating source tracing. This review outlines the structure and operational principles of coal-fired boiler systems, focusing on recent advancements in understanding the isotopic fractionation behavior of mercury (Hg), zinc (Zn), cadmium (Cd), and lead (Pb) during coal combustion and flue gas emission. These elements exhibit distinct fractionation patterns due to volatility and condensation dynamics. For instance, Hg, being highly volatile, undergoes significant mass-dependent and mass-independent fractionation, while semi-volatile elements like Cd and Zn show enrichment in fine fly ash. The review emphasizes the necessity of characterizing boiler-specific fractionation factors to improve the accuracy of isotopic tracing. It synthesizes field measurements and laboratory studies, highlighting that fractionation magnitudes can exceed analytical uncertainties by tens of times. The paper also discusses the influence of air pollution control devices (APCDs) such as selective catalytic reduction (SCR) and electrostatic precipitators (ESP) on isotope signatures. Ultimately, this work provides a framework for using metal isotopes as robust tracers in environmental forensics, underscoring the need for comprehensive understanding of boiler processes to interpret isotopic data correctly.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604006
High-strength sulfamethoxazole (SMX) wastewater severely inhibits anaerobic microorganisms, reducing organic degradation and methane yield. This study investigated the effects of short-chain (C6-HSL) and long-chain (C12-HSL) N-acyl-homoserine lactone (AHL) signaling molecules, individually and in combination, on the construction, performance, and antibiotic resistance gene (ARG) profiles of anaerobic electroactive biofilms within a microbial electrolysis cell coupled anaerobic digestion (MEC-AD) system. Compared to the control (no AHLs), SMX removal efficiency increased by 9.26%, 7.44%, and 10.67% for C6-HSL (T1), C12-HSL (T2), and combined (T3) treatments, respectively. Methane production rates rose by 20.4%, 16.9%, and 23.1% for T1, T2, and T3, respectively. AHLs promoted extracellular polymeric substance secretion, enhancing electroactive microbe attachment to the anode. Microbial community analysis revealed increased diversity and modulated key functional genera. Notably, Georgenia abundance increased by 16.77% (T1) and 36.47% (T3) but decreased by 15.99% (T2). ARG analysis showed that single AHLs elevated intI1, sul1, and sul2 abundances, whereas combined AHLs (T3) exhibited a milder response, with sul2 abundance reduced by 4.92% relative to control. This suggests synergistic AHLs suppress ARG host proliferation. This study first demonstrates that combined short- and long-chain AHLs enhance electroactive biofilm formation, maintain microbial community stability, and modulate ARG dissemination risk, offering a quorum sensing-based strategy for antibiotic wastewater treatment and risk management.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225213
Gas-liquid stirred tanks are widely used in oxidation, hydrogenation, and other chemical processes, where the gas dispersion state directly affects production efficiency. This study systematically investigated the effects of impeller type, impeller installation height, and rotational speed on gas-liquid dispersion in a stirred tank equipped with a porous tube sparger. Two typical impellers, a wide hydrofoil (WH) and a half-elliptical disk turbine (HEDT), were tested at various installation heights (L/D ratios) and gassing rates. The critical rotational speed for complete gas dispersion, agitation power consumption, and overall gas holdup were measured. Results showed that for both impellers, the critical Froude number (Fr) decreased significantly with increasing gas flow number (FlG). Under the same gassing rate, the HEDT impeller generally required a higher critical Fr and greater agitation power for complete dispersion compared to the WH impeller. Relative power demand (RPD) decreased as FlG increased, with a more pronounced decline at higher L/D ratios. At different impeller positions, the RPD of the HEDT impeller was higher than that of the WH impeller, indicating that the HEDT impeller's power was less affected by gas. Notably, the impeller installation height significantly influenced gas holdup and power consumption. When L/D = 0.75, higher gas holdup and lower power consumption were observed. This work provides crucial theoretical and data support for optimizing the design of gas-liquid stirred tanks with gas sparging, offering clear engineering value for enhancing mass transfer efficiency and energy-saving operation in chemical processes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509035
Aerobic granular sludge (AGS) is an economical and efficient technology, yet its application has been largely confined to sequencing batch reactors (SBRs). This study introduces a novel continuous-flow self-circulating upflow granular sludge bed (Zier) process with separate aeration for treating real domestic wastewater. By regulating operational parameters, the nitrogen removal performance and granular sludge stability were investigated. Under hydraulic retention time of 10 h, self-circulation times of 29–58, and upflow velocity of 11–18 m·h−1, effluent NH4+-N and TN averaged (5±3.4) mg·L−1 and (10±2.8) mg·L−1, respectively, with COD at (30±6.2) mg·L−1. The process maintained sludge stability: mixed liquor suspended solids increased from 5,080 to 6,650 mg·L−1, mean particle size was 209.6 μm, and sludge volume index (SVI) remained at 50–60 mL·g−1. Extracellular polymeric substances (EPS) increased from 26.05 to 68.27 mg·g−1, with proteins (PN) rising from 21.26 to 59.44 mg·g−1 and polysaccharides (PS) from 4.79 to 8.82 mg·g−1, elevating the PN/PS ratio from 4.4 to 6.7. These results confirm that the Zier process preserves granular structure and function in continuous flow. The process demonstrates robust nitrogen removal and offers a novel approach for continuous-flow AGS applications in real wastewater treatment.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60631-1
Methane dehydroaromatization (MDA) offers a carbon-neutral route to benzene, toluene, and xylene (BTX), yet the regulatory mechanisms of Brønsted acid site (BAS) strength and spatial proximity to Mo sites remain unresolved. This study systematically tunes BAS strength via isomorphous substitution (Al, Ga, Fe, B) and Mo-BAS proximity in ZSM-5, integrating catalytic evaluations with density functional theory (DFT). Strongly acidic Al-zeolites achieve the highest methane conversion, while weakly acidic B-substituted systems exhibit optimal mono-/bifunctional synergy, outperforming moderate-acid counterparts. DFT reveals that deprotonation energy (DPE) correlates with acid strength; Al-ZSM-5 (DPE = -5.68 eV) lowers the C–H activation barrier (ΔG = 1.467 eV). Spatial proximity analysis shows that nanoscale Mo-BAS distances, achieved via ball milling, enhance methane conversion by 33% and BTX yield by 31% compared to micrometer-scale mixtures, by accelerating intermediate transport and suppressing coke. These findings establish a multi-scale framework linking acid strength, spatial confinement, and electronic modulation, providing actionable guidelines for designing next-generation MDA catalysts.
Environmental Chemistry•2026•DOI: 10.0000/202605-2
Surface sediment samples were collected from 28 stations in the intertidal zones of Xiangshan Harbor, Sanmen Bay, and the southern coast of Hangzhou Bay, major fishery waters in Ningbo, to assess heavy metal pollution and ecological risk. Concentrations of Cu, Pb, Zn, Cd, Cr, Hg, and As were determined. Results showed that Cu and Cr were the primary超标 factors, with mean concentrations exceeding the Class I standard (GB 18668-2002) by factors of 1.03 and 1.1, respectively, in Xiangshan Harbor; in Sanmen Bay, Cr exceeded by 1.1 times, while Cu did not. In Hangzhou Bay, Cu and Cr were elevated but below the standard. Coefficients of variation (CV) for five metals in Hangzhou Bay exceeded 30%, indicating strong external influence. In Xiangshan Harbor, As showed strong variation, and in Sanmen Bay, Hg showed strong variation. The potential ecological risk indices (RI) were 38.5, 36.7, and 31.1 for Xiangshan Harbor, Sanmen Bay, and Hangzhou Bay, respectively, all indicating low ecological risk. Spatial distribution in Hangzhou Bay revealed a decreasing gradient from a chemical industrial park, suggesting industrial discharge as a primary source. The study provides baseline data for environmental management and recommends source control and bioremediation in high-risk areas.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605010
The underwater light environment is a critical limiting factor for the colonization of submerged macrophytes and the ecological restoration of shallow lakes. Previous studies rarely quantified the contribution of aquatic environmental factors to the water quality–underwater light–macrophyte relationship, nor did they comprehensively consider factor correlations or establish thresholds for macrophyte colonization. This study, conducted in a typical national wetland nature reserve (Hongze Lake), measured photosynthetically active radiation, light attenuation coefficient (Kd), euphotic depth (Zeu), water transparency (SD), total suspended solids (TSS), chlorophyll-a (Chl-a), total nitrogen (TN), and total phosphorus (TP). A simulation model for Kd was developed, spatial distributions of environmental factors were analyzed, and contribution rates to light attenuation were quantified. Results showed that the mean Kd was 10.31±3.76 m⁻¹, and the mean Zeu (0.53±0.24 m) was lower than the mean water depth (0.94±0.29 m), with a spatial pattern of shallower Zeu in the west and deeper in the east. TSS and Chl-a were the primary direct influencing factors, while TN acted mainly indirectly. To achieve effective macrophyte colonization under average water depth conditions, thresholds were determined: Zeu ≥ 0.94 m, SD ≥ 0.41 m, Kd ≤ 4.95 m⁻¹, and Chl-a ≤ 3.8 μg/L. These findings provide quantitative guidance for lake restoration and water quality management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605009
Reservoir CO2 emissions are a critical component of the global carbon cycle, yet existing prediction models often neglect reservoir size stratification, mixing data from large, medium, and small reservoirs. This study addresses this gap by constructing a training dataset exclusively for large and medium reservoirs in China and developing a neural network-based CO2 flux prediction model. The model revealed significant latitudinal zonation, with CO2 fluxes in southern low-latitude basins (e.g., Yangtze, Pearl) substantially higher than in northern high-latitude basins (e.g., Yellow, Songliao). Statistical analysis identified total phosphorus (TP) content as the strongest driver, exhibiting a positive exponential correlation with CO2 flux (p < 0.01). Reservoir age and latitude showed significant negative correlations, while physical parameters such as reservoir area, pre-impoundment submersion ratio, and average water depth showed no significant national-scale correlation. The study underscores the heterogeneity of dominant drivers across basins and proposes differentiated carbon mitigation strategies: for southern high-emission basins, controlling phosphorus inputs through wastewater treatment and restricting aquaculture; for northern basins, enhancing soil conservation to reduce carbon-rich sediment influx; and for new reservoirs, implementing vegetation clearance before impoundment and optimizing flood discharge schedules. These findings provide a theoretical basis for carbon emission characterization and support low-carbon management of large and medium reservoirs in China.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.226111
Efficient capture of the greenhouse gas nitrous oxide (N2O) is critical for climate change mitigation and resource recovery. In this study, two guanidinium-based hydrogen-bonded organic frameworks (HOFs) with pyridyl nitrogen site isomerism, namely G-5,5'-BPyDC and G-4,4'-BPyDC, were constructed using 2,2'-bipyridine-5,5'-dicarboxylic acid and 2,2'-bipyridine-4,4'-dicarboxylic acid as ligands. The effects of ligand structure on hydrogen-bonded network, pore environment, and N2O/N2 adsorption separation performance were systematically investigated via single-crystal X-ray diffraction, thermogravimetric analysis, Hirshfeld surface analysis, and gas adsorption experiments. Both frameworks are built via N-H...O hydrogen bonds. The asymmetric unit of G-5,5'-BPyDC contains two methanol molecules, resulting in larger free volume and surface area compared to G-4,4'-BPyDC, which exhibits more compact packing. Both materials show decomposition temperatures above 290°C, indicating good thermal stability. Hirshfeld surface analysis reveals that the total contribution of O-H/H-O and N-H/H-N hydrogen bonds in G-5,5'-BPyDC (32.0%) is higher than that in G-4,4'-BPyDC (29.7%). At 25°C and 4.0 MPa, the N2O adsorption capacity of G-5,5'-BPyDC is 2.32 mmol/g, surpassing that of G-4,4'-BPyDC (2.02 mmol/g). IAST calculations show that the selectivities of G-5,5'-BPyDC for N2O/N2 (50:50 and 10:90) mixtures reach 29.26 and 111.32, respectively, significantly superior to those of G-4,4'-BPyDC (6.61 and 17.03). Pyridyl nitrogen site isomerism effectively optimizes N2O/N2 adsorption and separation by modulating pore polarity and hydrogen-bonded network, offering a new strategy for isomer design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3926-0
Chirality is a fundamental determinant of molecular recognition and biological function, yet its integration into inorganic clusters remains a formidable challenge. Polyoxometalates (POMs), characterized by atomic precision, structural tunability, and versatile redox properties, provide an exceptional platform for investigating chirality at the interface of inorganic chemistry and biomedicine. Over the past two decades, substantial progress has been made in constructing chiral POM-based materials through diverse strategies, including chirality induction by external environments, intrinsic structural chirality, spontaneous symmetry breaking, and the design of self-assembled supramolecular architectures. The distinctive combination of redox activity, stability, and chirality in these systems has unlocked new avenues for biomedical applications, spanning antibacterial and anticancer therapies to potential interventions in neurodegenerative disorders. This review comprehensively overviews recent advances in the synthesis and biomedical applications of chiral POM-based materials, while outlining key challenges and opportunities that will guide future research in this emerging field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3840-3
Tactile sensing for dexterous robotic hands is essential for achieving human-like precision in manipulation. However, current tactile sensors face challenges such as insufficient durability, limited coverage, and poor conformability to curved, jointed surfaces. This study presents a stretchable distributed tactile sensor array designed for dexterous robotic hands. The array comprises 18 sensing units distributed across the hand, incorporating quasi-homogeneous functional layers interconnected by crosslinked interpenetrating networks, and composite electrodes combining high conductivity with stretchability. This design yields a thin, soft, transparent, and stretchable sensor array that integrates seamlessly with a commercial dexterous hand. The sensor array exhibits high interlayer tensile strength, high sensitivity, low hysteresis, and excellent long-term reliability over 10,000 loading cycles. Experimental results demonstrate accurate detection of tactile force across the entire robotic hand during object grasping. Using convolutional neural network algorithms, the sensor array identifies different object types with 90.1% accuracy, with results displayed in real time on a digital twin interface. The proposed sensor array holds significant potential for embodied intelligence and robotics in adaptive grasping, safe manipulation, and remote teleoperation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-3961-8
This correction addresses an inadvertent misplacement of Fig. 4b3 during figure reorganization in the original article published in Science China Materials, volume 65, issue 10, 2022, page 2850 (DOI: 10.1007/s40843-022-2024-6). The corrected Fig. 4b is presented herein. The authors confirm that this correction does not affect the results, conclusions, text, or figure caption of the original work. The correction was requested by the authors and received on 6 January 2026, accepted on 8 January 2026, and published online on 10 February 2026. The original study introduced flexible electrostatic hydrogels derived from marine organisms for nitric oxide-enhanced photodynamic therapy against multidrug-resistant bacterial infections. The correction ensures the accurate representation of experimental data, maintaining the integrity of the scientific record.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607001
Co-combustion of municipal solid waste (MSW) and sewage sludge (SS) offers a promising route for synergistic waste management, yet pollutant release dynamics and environmental trade-offs remain inadequately characterized. This study systematically investigated the combustion behavior, pollutant emissions, and environmental impacts of MSW-SS blends at 850, 950, and 1050 °C with varying SS mass fractions (0–100%). Machine learning models, particularly artificial neural networks (ANN), were optimized to predict pollutant generation, and SHAP analysis identified key influencing factors. Results demonstrated that combustion temperature and blending ratio significantly affected burnout efficiency, with temperature exerting a more pronounced effect. An SS proportion of 20% yielded favorable combustion performance. Among pollutants, N2O and C2H4 emissions were significantly influenced by temperature, blending ratio, and their interaction, indicating high sensitivity to operating conditions. CO and C6H6 were primarily affected by blending ratio, while C7H8 responded to both temperature and blending ratio. N2O and CH4 were predominantly released during the initial combustion stage; elevated temperatures markedly suppressed N2O formation, and co-combustion generally reduced CH4 emissions. A 20% SS blend effectively reduced SO2 emissions, and NO synergistic reduction was optimal at 950 °C. Emissions of CO, C2H4, C6H6, and C7H8 exhibited antagonistic behavior under co-combustion. The ANN model accurately predicted pollutant concentrations, with combustion temperature, volatile matter, and fixed carbon content identified as critical factors. Environmental impact assessment revealed that higher temperatures reduced global warming potential (GWP) and photochemical ozone creation potential (POCP), while lower MSW proportions decreased POCP but increased GWP and acidification potential (AP). Integrating combustion performance, pollutant release, and environmental impacts, an SS proportion of 20% is recommended for optimized co-combustion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022702
This study systematically investigated the occurrence and vertical distribution of per- and polyfluoroalkyl substances (PFAS) in solid waste, leachate, and surrounding groundwater at a municipal solid waste landfill in Fuyang City, Anhui Province, China. A total of 23 PFAS were detected in solid waste, with total concentrations (∑PFAS) ranging from 7.95 to 172.28 ng·g⁻¹. Trifluoroacetic acid (TFA), an ultrashort-chain PFAS, was ubiquitous, contributing on average 59% to the total PFAS mass. PFAS composition varied with depth: long-chain PFAS dominated in middle and upper layers, while short-chain and ultrashort-chain PFAS were more abundant in deeper layers, indicating enhanced downward migration of shorter-chain compounds. Sulfonic acid PFAS exhibited increasing relative abundance with depth. Leachate ∑PFAS concentration was 14.35 μg·L⁻¹, dominated by short-chain compounds such as PFPrS and PFBS, consistent with the composition in bottom-layer waste. Groundwater surrounding the landfill contained multiple PFAS, with concentrations decreasing with distance from the landfill, confirming the landfill as a source of PFAS to the surrounding environment. Multivariate analyses (PCoA and Bray–Curtis dissimilarity) revealed that some groundwater samples closely resembled leachate in PFAS composition, suggesting direct impact via leachate migration. These findings underscore the role of landfills as significant reservoirs and sources of PFAS, particularly ultrashort-chain compounds, and highlight the need for improved leachate management to mitigate groundwater contamination.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60681-0
The escalation of global warming and climate change necessitates the development of clean energy carriers. Hydrogen, with a high combustion value of 120 MJ/kg and net-zero carbon emissions, is a promising alternative. Catalytic methane pyrolysis offers a route to produce high-purity hydrogen and functional carbon materials simultaneously. However, challenges persist in catalyst deactivation due to carbon deposition and the efficient separation and valorization of carbon byproducts. This review systematically examines recent progress in solid and molten-medium catalysts for methane pyrolysis. It highlights strategies to enhance catalyst stability, including precise control of active sites, alloying, support optimization, and tuning the carbon-catalyst interface. The introduction of molten media catalytic systems, which feature dynamically refreshed gas-liquid interfaces, can fundamentally mitigate deactivation and facilitate continuous carbon separation. The paper discusses reaction mechanisms, catalytic performance, and control of carbon morphology, along with strategies for efficient separation and purification of carbon products in molten media. High-value applications of the produced carbon materials are also explored. The review underscores the potential of methane pyrolysis as a low-carbon technology for hydrogen production, while identifying key research directions for industrial scalability.