SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4279-0
Inkjet printing has emerged as a viable additive manufacturing route for organic light-emitting diodes (OLEDs), offering drop-on-demand patterning, high material utilization, and compatibility with large-area flexible substrates. This review critically examines the formulation science, printhead physics, and drying kinetics that govern the quality of inkjet-printed organic layers. We analyze the rheological window required for stable jetting, typically 1–20 mPa·s viscosity and 25–45 mN/m surface tension, and the dimensionless Ohnesorge number (0.1 < Z < 1) that defines satellite-free droplet formation. The coffee-ring effect, driven by capillary flow and solvent evaporation gradients, remains the dominant failure mode for pixel non-uniformity; binary solvent systems and substrate temperature control (40–60 °C) mitigate this. We survey recent progress in printed hole-transport, emissive, and electron-transport layers, with particular attention to cross-linkable hole-transport materials that resist interlayer dissolution. Device performance metrics from printed OLEDs now reach external quantum efficiencies of 15–20% for fluorescent emitters and >25% for phosphorescent systems, with operating lifetimes (T95) exceeding 1,000 hours at 1,000 cd/m². We identify remaining bottlenecks: nozzle clogging from aggregated nanoparticles, film thickness variation across large panels, and the absence of standardized ink formulations. The review concludes with a roadmap for industrial adoption, emphasizing in-line metrology and closed-loop process control as prerequisites for yield parity with vacuum-deposited OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3694-3
Lithium metal anodes (LMAs) are among the most promising candidates for next-generation batteries with high energy density. However, their practical application is hindered by persistent challenges such as dendritic lithium growth, unstable solid electrolyte interphases (SEI), and poor Coulombic efficiency. Surface coating has emerged as a viable solution to address these limitations. In particular, atomic and molecular layer deposition (ALD/MLD) techniques offer unparalleled control over the fabrication of ultrathin, conformal coatings, making them especially suitable for stabilizing LMA interfaces. This review comprehensively summarizes recent progress in applying ALD and MLD methodologies to construct durable artificial interphases on LMAs. We discuss the underlying mechanisms through which these coatings inhibit dendrite formation, improve interfacial integrity, and facilitate uniform lithium-ion transport. The roles of inorganic ALD coatings, organic MLD coatings, and their organic–inorganic hybrids are systematically examined, with a focus on their chemical composition, deposition behavior, and electrochemical characteristics. Moreover, we highlight the enhanced performance achieved through the integration of ALD/MLD-engineered interfaces in full-cell systems. The review concludes with a discussion of current challenges and potential research avenues aimed at advancing the rational development of effective LMA protection strategies. Overall, this work offers valuable insights into the role of interfacial engineering via ALD and MLD in enabling the practical deployment of lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3702-0
Construction of metal-mediated redox sites is an appealing approach to enhance photocatalytic CO2 reduction coupled with H2O oxidation. However, conventional static redox sites generally lack spatiotemporal matching during reaction processes due to the constraints of rigid structure and the linear scaling relationship of adsorbed species. Herein, an alkanolamine-Ir synergistic system was developed, where flexible monoethanolamine (MEA) molecules function as molecular ferries to selectively adsorb CO2 via carbamate formation, while adjacent Ir nanoparticles (NPs) serve as H spillover hubs that relay protons, creating spatiotemporal adaptability that synchronizes CO2 reduction and water oxidation. In addition, time-resolved in situ spectroscopy directly captures the rapid transformation of carbamate intermediates concurrent with sustained IrOOH intermediates formation. Microkinetic modeling further demonstrates that the MEA-Ir modified system (M-Ir/ACN) creates interconnected H spillover networks between Ir NPs and MEA, facilitating efficient proton transport that drives *COOH formation with a favorable thermodynamic energy. As a result, the M-Ir/ACN achieves a 20-fold increase in CO production compared to the pristine sample while maintaining high stability throughout 45 h of continuous operation. This study presents that flexible molecular ferries boost CO2 adsorption, and deciphers how flexible molecular-metal synergy directs the trafficking of CO2-derived intermediates toward highly efficient CO2 photoreduction.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3747-3
Thermochromic soft materials are flexible functional materials that adaptively tune optical properties (transmittance, reflectance, or scattering) with temperature for thermal modulation. Herein, a laminated thermochromic gel (DEE-DA) is synthesized by encapsulating a thermochromic hydrogel (DA) between two hydrophobic ionogels (DEE) in a stacked configuration. The synergy of multiple dynamic bonds endows the DEE-DA gel with exceptional mechanical properties and remarkable self-healing capability (98.8% at 30 °C). More importantly, attributed to the temperature-responsive reversible cleavage and recombination of hydrogen bonds and borate ester bonds, DEE-DA gel demonstrates tunable transmittance with a light modulation efficiency of 85.45%. In response to the various external conditions, the gel can auto-adjust the optical properties to avoid sun irradiation or heat loss. Accordingly, the gel enables efficient dual-mode thermal modulation across a broad temperature range to realize thermal management. The research proposes gel thermochromism and laminated durability enhancement for adaptive materials in smart buildings and wearables.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61112-2
The design of heteroatom-doped porous carbon materials integrated with metal oxide nanostructures has emerged as an efficient approach for improving the electrochemical performance of supercapacitors. A green and cost-effective method is reported for the fabrication of a hierarchical porous carbon composite from bacterial cellulose (BC), lignosulfonic acid (LS), and polypyrrole (PPy). LS serves as both an anchoring agent and a soft molecular template, directing the oxidative polymerization and uniform deposition of PPy onto the BC nanofibers in the presence of FeCl3 as the oxidizing agent. Subsequent carbonization under a nitrogen atmosphere results in the formation of an N/S co-doped carbon framework decorated with Fe3O4 nanoparticles, denoted C-BCLP. For comparison, a control composite consisting of BC and PPy without LS was carbonized to produce C-BCP. X-ray diffraction patterns confirm the synthesis of Fe3O4 nanoparticles and the preservation of the fibrous carbon structure. Electron microscopy shows that C-BCLP has a highly porous and conductive network with a homogeneous distribution of C, O, N, S, and Fe elements. Because of the combined effects of hierarchical porosity, heteroatom doping, and Fe3O4 incorporation, the C-BCLP electrode has high specific capacitances of 338.3 F g–1 at 1 A g–1 and 191.6 F g–1 at 10 A g–1. In addition, it has excellent cycling stability, retaining 99.1% of its initial capacitance after 10,000 charge-discharge cycles, outperforming the C-BCP electrode. The work suggests a promising way to develop next-generation high-performance supercapacitors.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225172
The increasing discharge of oily wastewater from oil extraction and anthropogenic activities necessitates the development of efficient oil-water separation technologies to safeguard ecological and environmental safety and ensure sustainable resource utilization. Membrane separation technology, owing to its high efficiency and operational convenience, has emerged as a viable solution for treating oily wastewater. To enhance the hydrophilic and oleophobic properties of hydrophobic separation membranes, this study employed polyvinylidene fluoride (PVDF) hydrophobic microfiltration membranes with robust mechanical properties as substrates. Through a biomimetic coating approach, dopamine (DA) was first polymerized to form polydopamine (PDA) on the membrane surface, which subsequently reacted with polyvinyl alcohol (PVA) to construct a dense hydrophilic layer, yielding modified membranes with hydrophilic/oleophobic surface characteristics. The morphology and chemical composition of the modified membranes were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). Oil-water separation performance was comprehensively evaluated by measuring water contact angle, underwater oil contact angle, emulsion flux, and oil rejection. Under optimal conditions, the modified membrane M3 exhibited a pure water flux of 4893.2 ± 70.2 L/(m²·h), an emulsion flux of 2138.1 ± 29.4 L/(m²·h) for toluene-in-water emulsion, and an oil rejection of 98.5% ± 0.1%. Simulated fouling and regeneration tests using bovine serum albumin (BSA) solution demonstrated a flux recovery rate of 92.0% for M3, indicating excellent antifouling performance. Immersion tests in acid, alkali, and salt solutions confirmed the modified membrane's outstanding chemical stability. The designed PVDF modified membrane offers advantages of simplicity, environmental friendliness, and high efficiency, showing significant application potential in oil-water separation and providing a novel strategy for membrane development.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.226111
Efficient capture of the greenhouse gas nitrous oxide (N2O) is critical for climate change mitigation and resource recovery. In this study, two guanidinium-based hydrogen-bonded organic frameworks (HOFs) with pyridyl nitrogen site isomerism, namely G-5,5'-BPyDC and G-4,4'-BPyDC, were constructed using 2,2'-bipyridine-5,5'-dicarboxylic acid and 2,2'-bipyridine-4,4'-dicarboxylic acid as ligands. The effects of ligand structure on hydrogen-bonded network, pore environment, and N2O/N2 adsorption separation performance were systematically investigated via single-crystal X-ray diffraction, thermogravimetric analysis, Hirshfeld surface analysis, and gas adsorption experiments. Both frameworks are built via N-H...O hydrogen bonds. The asymmetric unit of G-5,5'-BPyDC contains two methanol molecules, resulting in larger free volume and surface area compared to G-4,4'-BPyDC, which exhibits more compact packing. Both materials show decomposition temperatures above 290°C, indicating good thermal stability. Hirshfeld surface analysis reveals that the total contribution of O-H/H-O and N-H/H-N hydrogen bonds in G-5,5'-BPyDC (32.0%) is higher than that in G-4,4'-BPyDC (29.7%). At 25°C and 4.0 MPa, the N2O adsorption capacity of G-5,5'-BPyDC is 2.32 mmol/g, surpassing that of G-4,4'-BPyDC (2.02 mmol/g). IAST calculations show that the selectivities of G-5,5'-BPyDC for N2O/N2 (50:50 and 10:90) mixtures reach 29.26 and 111.32, respectively, significantly superior to those of G-4,4'-BPyDC (6.61 and 17.03). Pyridyl nitrogen site isomerism effectively optimizes N2O/N2 adsorption and separation by modulating pore polarity and hydrogen-bonded network, offering a new strategy for isomer design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3742-5
Nematic liquid crystal elastomers (NLCEs) exhibit excellent mechanical properties and diverse deformation modes, while cholesteric liquid crystal elastomers (CLCEs) as photonic crystals (PCs) possess superior optical performance and intelligent response characteristics. Combining these two elastomers into a monolithic material is a challenging yet promising endeavor. Here, we designed and synthesized a new diselenide-bonded molecule (DSeAc), whose lower bond energy between selenium atoms endows it with excellent bond exchange ability. Consequently, two LCE matrices containing DSeAc molecules can achieve seamless bonding under mild conditions via dynamic diselenide bond exchange. By integrating a CLCE film and an NLCE actuator into a monolithic film, we enable the integration of two functional components, whose functional characteristics can be tailored as required. This function block combination strategy offers a promising pathway for developing smart materials with complex functions, showing great potential in information storage, anti-counterfeiting, and biomimetics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4012-4
Stimuli-responsive fluorescent hydrogels, owing to their tunable optical properties and unique smart response characteristics, have significant potential in encryption applications and information security. However, most current systems are limited to single-stimulus responsiveness and lack the capability for programmable information erasure or multi-modal dynamic synergy. Hence, we propose a multi-stimuli-responsive phase-change hydrogel incorporating aggregation-induced emission hydrophobic carbon dots (AIE-HCDs) and polyethylene glycol (PEG)-cellulose network, demonstrating dynamic fluorescence chromism under various external triggers. The hydrogel exhibits solvent-exchange-triggered fluorescence color changes from blue to red, enabled by the concentration modulation of AIE-HCDs through the exchange between PEG and water. Additionally, the temperature-induced phase transition of PEG from crystalline to molten state modulates the aggregation and dispersion of AIE-HCDs, thereby enabling dynamic fluorescence color changes. The phase transition further confers excellent shape-memory behavior and adjustable mechanical properties, with the tensile modulus varying from 6.28 MPa in the molten state to 36.23 MPa in the crystalline state, while maintaining high transparency (~88% in the molten state). By utilizing micro-contact printing and the multi-stimulus response, an encryption platform enables information to be hidden, selectively read under sequential stimuli (thermal, UV, and solvent), and completely erased upon demand. This strategy demonstrates significant potential for advancing high-level information encryption and anti-counterfeiting technologies.