SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4491-3
Magnetic tunnel junctions (MTJs) with multiferroic tunneling barriers offer a pathway to fully electrically controlled multi-state memory, addressing the high energy costs and scalability limits of magnetically controlled counterparts. In this work, we propose a theoretical design achieving four or ten distinct resistance states via electrical control, with a giant tunneling magnetoresistance (TMR) ratio of 1.1×10^4% (11000%). This value surpasses all previously reported MTJs, including experimental systems such as CoFeB/MgO/CoFeB (TMR 65%, 4 states) and theoretical systems like Ga2O3/MgO/Ga2O3 (TMR 1120%, 2 states). The multiferroic barrier enables simultaneous control of ferroelectric and magnetic order parameters, allowing reversible switching between multiple resistance levels without external magnetic fields. Our first-principles calculations reveal that the high TMR arises from spin-dependent tunneling through the barrier, modulated by the ferroelectric polarization direction and magnetization configuration. The device operates with low write energy and exhibits non-volatile retention, making it suitable for high-density storage and in-memory computing. This work establishes a new benchmark for electrically controlled MTJs and provides a practical route to overcome the limitations of current spintronic memory technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225204
Cobalt-doped silica aerogel (Co@Si-A) catalysts were synthesized via a one-step sol-gel method and applied for peroxymonosulfate (PMS) activation to degrade tetracycline (TC). The catalyst with 25 wt% cobalt doping (25Co@Si-A) exhibited superior catalytic performance, achieving 98.97% TC degradation within 30 min under specified conditions (TC 10 mg/L, 100 mL). Brunauer-Emmett-Teller (BET) analysis revealed a high specific surface area and well-developed porous architecture with nano-confined spaces. The 25Co@Si-A/PMS system demonstrated outstanding adaptability across a broad pH range (5–9), maintaining >95% degradation efficiency, and showed strong resistance to sulfate and nitrate ions. In real water matrices, degradation efficiency remained around 80%. After five consecutive cycles, the system retained 82.33% degradation efficiency, with cobalt ion leaching of only 23.7 μg/L in the first cycle, indicating excellent stability. Mechanistic studies using electron paramagnetic resonance (EPR), radical quenching, and probe compound tests confirmed a synergistic radical and non-radical pathway. The primary reactive species were sulfate radicals (SO4•−), hydroxyl radicals (•OH), and singlet oxygen (1O2), with contributions of 58.53%, 9.79%, and 31.68%, respectively. Electrochemical tests indicated that 25Co@Si-A exhibited superior charge transfer compared to Co3O4, attributed to the nano-confined effect of the silica aerogel, which enhanced Co(II)/Co(III) redox cycling and PMS activation. This research provides a promising strategy for utilizing silica aerogel-based catalysts in advanced oxidation processes for water treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509009
Air-supplied jet aerators, combining hydraulic jet and gas induction principles, are critical equipment in aerobic biological wastewater treatment. However, low energy conversion efficiency and insufficient local gas-liquid mixing are core bottlenecks limiting their competitiveness. A three-dimensional flow field analysis method for jet aerators was developed based on the k-ε turbulence model and Euler-Euler multiphase flow model. The effects of different orifice plate distributions, shapes, sizes, hole numbers, and installation positions on average pressure, turbulent kinetic energy, and turbulent dissipation rate were systematically studied. Results show that the asterisk-shaped orifice plate yields the highest gas-liquid two-phase turbulent mixing intensity, followed by the annular shape, while the parallel arrangement yields the lowest. With increasing hole number and single-hole size, average pressure, velocity, turbulent kinetic energy, and turbulent dissipation rate for different plate shapes initially fluctuate downward and then stabilize. When the number of triangular holes is 9, mass transfer efficiency is significantly enhanced, and overall aerator performance is excellent. When the triangular hole diameter is 7 mm, the device achieves an optimal match between energy utilization and mixing efficiency across pressure distribution, velocity field, turbulent kinetic energy, and dissipation rate. The farther the porous thin plate is installed from the sewage nozzle, the further gas-liquid two-phase turbulence is enhanced. Experiments confirm that the boundary layer is fully developed, liquid and air are thoroughly mixed, and the orifice plate promotes bubble breakup and refinement through throttling and collision, significantly improving oxygen transfer efficiency. This research provides a theoretical basis and technical support for the transformation and upgrading of aeration technology towards high efficiency and low carbon, and for extending equipment service life.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605016
BiOX (X=Cl, Br, I) photocatalytic materials were synthesized via a chemical precipitation method. Their structures and properties were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption-desorption, and ultraviolet-visible diffuse reflectance spectroscopy. Results showed that BiOBr exhibits a flower-like nanomicrosphere structure composed of nanosheets, providing a more three-dimensional morphology, larger specific surface area, and moderate light absorption range, resulting in superior visible light absorption. Consequently, BiOBr demonstrated the best photocatalytic degradation of NO under xenon lamp irradiation. The study further investigated the effects of light intensity, NO flow rate, and oxygen presence on the NO degradation performance of BiOBr. Optimal NO removal rate of 58% was achieved under conditions of a light source distance of 15 cm, NO flow rate of 15 mL/min, and in the presence of oxygen. The degradation rate constant for BiOBr was 11×10⁻⁴ min⁻¹, significantly higher than that of BiOCl and BiOI. BiOBr also exhibited good reusability and stability. These findings provide an important experimental basis for the application of BiOBr in the photocatalytic degradation of NO.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510013
To investigate the spatiotemporal distribution of nutrients and chlorophyll-a (Chl-a) in Dongping Lake, a coupled hydrodynamic-water quality-ecological model was developed using Delft3D. The model simulated total nitrogen (TN), nitrate nitrogen (NO3-N), ammonia nitrogen (NH4-N), total phosphorus (TP), soluble reactive phosphorus (SRP), and Chl-a. After validation, the model systematically analyzed the spatiotemporal patterns and influencing factors, revealing nitrogen and phosphorus transformation pathways. Results showed three temporal phases: relatively stable concentrations from January to April, significant fluctuations from May to August, and gradual stabilization from September to December, with peak timing varying among indicators. Spatially, concentrations were generally higher in the south and lower in the north, but NH4-N, TP, and Chl-a exhibited reverse patterns (higher in north) during certain periods. External inputs, primarily from the Dawen River, dominated the overall distribution, while water temperature, dissolved oxygen, and hydrodynamic conditions further modulated internal variability. Nitrogen and phosphorus showed distinct fates: nitrogen was primarily removed via denitrification and anammox, whereas phosphorus tended to transform into particulate forms and remained in the lake for extended periods. These findings provide scientific support for precise water quality management in Dongping Lake.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608003
The transition of municipal wastewater treatment from energy-intensive aerobic processes to energy-recovering anaerobic technologies is critical for achieving carbon neutrality. However, anaerobic treatment of low-strength wastewater faces operational challenges, especially after prolonged shutdowns and under low-temperature stress. This study investigated the recovery and performance of a pilot-scale anaerobic filter (AF) packed with volcanic rock media (effective volume 240 L) treating actual municipal wastewater. After a 234-day starvation period, the AF recovered within 63 days by extending hydraulic retention time from 8 to 12 hours, achieving total chemical oxygen demand (TCOD) and soluble chemical oxygen demand (SCOD) removal amounts of 58.6 mg/L and 21.5 mg/L, respectively. Following 100 days of low-temperature operation (influent temperature dropped to 11.7 °C), TCOD and SCOD removal amounts remained at 54.6 mg/L and 28.6 mg/L, respectively. Although methane production volume decreased, the specific methane yield was not significantly affected (0.276 L CH4/g TCODre during recovery vs. 0.244 L CH4/g TCODre under low temperature). Mechanistic analysis revealed that increased protein secretion in extracellular polymeric substances (EPS) was crucial for resistance to low-temperature stress, with protein content negatively correlated with temperature. Microbial community analysis showed that functional populations recovered in the order of hydrolytic acidogens, hydrogen-producing acetogens, and methanogens. Methanobacterium dominated after starvation, while Methanosaeta became dominant after low-temperature exposure due to its high affinity for acetate. Carbon footprint accounting indicated that recovering dissolved methane and coupling with nitrate-dependent methane oxidation is the optimal strategy for carbon reduction.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4126-0
Flexible X-ray detectors are constrained by the difficulty of producing semiconductor films that simultaneously exhibit uniform morphology, high crystallinity, and mechanical robustness. Here, we introduce a hydrogen-bond engineered supramolecular (HBES) strategy to overcome these limitations in supramolecular bismuth halide clusters (PDBiI5). By incorporating polyacrylic acid (PAA), a dynamic supramolecular network is formed that suppresses the coffee-ring effect during ultrasonic spray-coating via increased solution viscosity and controlled kinetic balance between solvent evaporation and solute diffusion. The HBES approach also modulates crystallization kinetics, extending crystal growth time from 23 to 41 s, yielding densely packed films with enhanced crystallinity and reduced defect states. These improvements lead to superior charge transport: a hole mobility of 2.16 cm2 V−1 s−1 and a mobility-lifetime product of 9.1 × 10−4 cm2 V−1. The resulting X-ray detectors achieve a record sensitivity of 19,009 μC Gyair−1 cm−2 and an ultralow detection limit of 3.35 nGyair s−1, with excellent operational and environmental stability. Leveraging the mechanical robustness from the supramolecular network, we demonstrate the first direct-type flexible X-ray imager, retaining 85% performance after 1000 bending cycles. This imager overcomes geometric distortion and vignetting, maintaining 85% edge photocurrent versus 58% for rigid detectors, enabling clear imaging of curved objects. This work establishes a versatile supramolecular engineering paradigm for high-performance flexible X-ray detection and imaging.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3551-5
Flexible photonic crystal (PC) materials exhibit exceptional optical properties but suffer structural degradation under repeated mechanical stress, leading to photonic band gap impairment and limited sustainability. This study introduces a self-healing thermoplastic polyurethane (STPU) with an inverse-opal PC structure, inspired by natural structural coloration and self-healing mechanisms. Synergistic dynamic covalent disulfide bonds and hydrogen bonds enable reversible mechanical adjustment, yielding a tensile strength of 26.76 MPa and elongation at break of 2000%. The inverse opal structure facilitates reversible color transitions in response to solvents (water, ethanol) and mechanical strain (0–70%) via lattice spacing modulation. Incorporating an interpenetrating network of polyacrylamide hydrogel and carbon nanotubes enhances strain sensitivity and structural color stability. The material demonstrates broad potential in flexible sensors, adaptive optical devices, bioinspired robotic skins, and dynamic anti-counterfeiting encryption, overcoming traditional PC limitations such as high fragility and single functionality. This strategy advances durable intelligent sensing materials with enhanced environmental adaptability and multifunctional integration.