SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4213-x
Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3932-1
Organic room-temperature phosphorescence (RTP) materials have attracted considerable interest due to their unique advantages, such as tunable molecular structures, excellent processability, intrinsic flexibility, and diverse excited-state characteristics. Among these, stimuli-responsive RTP materials, whose luminescence can be modulated by external stimuli (e.g., light, pH, heat, mechanical force or solvent), hold great promise for advanced applications like anti-counterfeiting, information encryption, and sensing. In this review, we systematically summarize recent advances in stimuli-responsive RTP materials, classifying them based on their activation mechanisms. Specifically, we elucidate the fundamental principles governing their stimulus-responsive behaviors and highlight representative examples from various categories. Furthermore, we explore structure-property relationships and design strategies to establish a foundational framework for understanding these materials. This review not only deepens the mechanistic insights into stimuli-responsive RTP systems but also provides strategic guidance for the rational design of next-generation intelligent RTP materials in multidisciplinary fields.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3927-9
The mechanical properties of as-cast TiAl alloys are severely limited by their coarse as-cast microstructure. This study proposes a low-temperature pre-deformation heat treatment to refine the microstructure of an as-cast Ti-47Al-2Nb-2Cr alloy. The process involves pre-deformation below the eutectoid temperature followed by heat treatment in the α+γ phase field, yielding two distinct microstructures: duplex (DP) and nearly lamellar (NL). The average lamellar colony size was reduced to 5.3% and 20% of the as-cast size for DP and NL structures, respectively. Microstructural evolution analysis reveals that the decomposition of coarse lamellar colonies and the formation of fine grains are governed by γ recrystallization, γ→α phase transformation, and α recrystallization. Remnant colonies after deformation are completely eliminated by subsequent heat treatment, enhancing microstructural homogeneity and mechanical properties. The DP alloy exhibits an ultimate tensile strength (UTS) of 537 MPa and an elongation (EI) of 6.8% at 800°C, representing increases of 44.7% and 518.2% over the as-cast alloy, respectively. Analysis of crack propagation and deformation mechanisms indicates that grain refinement and lamellar structure refinement contribute to improved deformation ability. This work provides a viable pathway for optimizing as-cast TiAl alloys for high-temperature applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61093-1
Advanced catalyst structures with good active site accessibility and strong metal-support interactions are crucial for oxygen reduction reaction (ORR) catalysis. A hierarchically porous Pt catalyst supported on honeycomb-like nitrogen-doped carbon (Pt/HNC-400, where 400 denotes the optimal dosage (mg) of the sacrificial SiO2 hard template used during synthesis) was fabricated by combining template-assisted pyrolysis and alcohol reduction. The fabrication involves the template-assisted pyrolysis of ZIF-67 (which provides the N-dopant through its 2-methylimidazole ligand) followed by HF etching to completely remove the SiO2, yielding a 3D interconnected porous carbon support. Compared to a commercial Pt/C, it had an exceptional ORR performance with a half-wave potential of 0.901 V (41 mV higher), a mass activity at 0.9 V that was 15.3 times higher, and significantly improved durability (a half-wave potential decay of 25 mV vs. 80 mV after 10,000 accelerated durability tests (ADTs)). Mechanistic investigations showed that this superior performance is due to the combined effects of the 3D porous structure, ultrafine Pt nanoparticles with strong metal-support interactions, and in-situ formed Co-Nx moieties from the pyrolysis of precursor ZIF-67. After 10,000 ADTs it was shown to have excellent structural integrity, retaining 87.4% of its initial electrochemically active surface area (102.7 m2 g−1). This study may assist the development of new high-performance ORR catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3834-x
Lithium metal anodes face critical barriers to practical application due to dendritic growth and interfacial instability, which cause short cycle life and safety hazards. This work introduces a highly stable and ultrahigh-rate lithium metal anode using a lithiophilic Sm2S3-modified carbonaceous host. The in situ formation of a Li2S-reinforced interphase layer enables highly reversible lithium plating/stripping and uniform deposition. The modified anode achieves an ultrahigh rate capability of 20 mA cm−2 and ultralong cycling stability of 7440 cycles with dendrite-free morphology. In a 4.5 V anode-less Li||LiCoO2 cell with an areal capacity of ~1.93 mA h cm−2, the system sustains over 1100 cycles with 87.2% capacity retention under harsh conditions: an ultralow negative-to-positive capacity ratio (N/P) of ~0.26 and lean electrolyte of ~5 g Ah−1. Furthermore, an anode-less pouch cell with an ultrahigh areal capacity of ~6.01 mA h cm−2 delivers superior cycling performance even at an ultra-low N/P ratio of ~0.71 and ultra-lean electrolyte of ~1 g Ah−1, achieving a high energy density of 505 Wh kg−1. This work provides a scalable and effective strategy for advancing reliable, practical lithium metal batteries.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510004
Ammonium salt crystallization-induced blockage of the regenerative heat exchanger in regenerative thermal oxidizers (RTOs) remains a critical operational challenge, particularly in pharmaceutical applications where NH4Cl constitutes up to 70% of the fouling deposits. This study employs computational fluid dynamics (CFD) to systematically simulate six purging configurations, varying injection angle and pipe arrangement, and quantifies purging effectiveness via a novel evaluation method based on characteristic observation planes. Using the Realizable k-ε turbulence model coupled with a porous media model, we analyze the velocity distribution and low-velocity failure zones at the gas chamber–regenerator interface. Results demonstrate that a single-pipe 45° oblique injection achieves the highest effective purging area of 57.6%, a 35.7% improvement over conventional horizontal purging. Increasing pipe diameter significantly enhances flow uniformity, yielding an efficiency gain of approximately 40%, outperforming mere increases in gas velocity. A synergistic optimization strategy is proposed, prioritizing high-performance purging structures with coordinated parameter tuning. The recommended configuration—single-pipe 45° injection, 280 mm pipe diameter, and 14 m·s−1 gas velocity—achieves 88.2% purging efficiency without additional fan power, representing a 45.6% improvement over conventional modes. These findings provide a theoretical basis and engineering solution for RTO purging system design and operational optimization.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606021
To provide a theoretical basis for energy-saving combustion of regenerative thermal oxidizers (RTOs), this study analyzes energy nodes during RTO operation, refines heat balance accounting, and establishes an overall energy system. Taking a three-chamber RTO as the research object, the enthalpy of exhaust gas at different stages is calculated, and a whole-process heat balance model is developed to systematically analyze exhaust gas preheating, combustion, heat recovery, and heat loss transfer. An improved energy accounting method is proposed to address dynamic heat exchange inside heat accumulators, coupling of multiple gas streams, and boundary heat loss under complex conditions. The longitudinal temperature distribution function of heat accumulators is introduced to overcome difficulties in heat accounting within the accumulator chamber. A thermodynamic system covering 11 key internal energy nodes is constructed. Combined with design characteristics of RTO operation across industries, the application scope of the overall energy system is analyzed; equilibrium terms can be adjusted according to actual conditions, ensuring wide applicability. Validation via an RTO energy system for a glove manufacturing plant demonstrates that outlet temperature prediction accuracy improves from 14.3% to 2.8%, providing a theoretical foundation for future intelligent energy-saving combustion research.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3790-5
Near-infrared (NIR) phosphors with high quantum efficiency (QE) and thermal robustness are critical for phosphor-converted light-emitting diodes (pc-LEDs). Here, a Cr3+-activated Lu2BaAl4SiO12 (LBASO) garnet phosphor is engineered via chemical unit cosubstitution of [Ba2+-Si4+] for [Lu3+-Al3+] in Lu3Al5O12 (LuAG), inducing a strong crystal field that yields NIR emission at 705 nm. The optimized LBASO:0.07Cr3+ exhibits an internal quantum efficiency (IQE) of 84.82% and external quantum efficiency (EQE) of 46.02%. Notably, it demonstrates anti-thermal quenching (ATQ) with 126.03% of its initial intensity at 498 K under 442 nm excitation, attributed to a wide band gap, weak electron-phonon coupling, defect trap energy levels, high structural rigidity, and optimized electron population distribution. A NIR pc-LED fabricated with this phosphor achieves an output power of 134.99 mW and photoelectric conversion efficiency of 11.4% at 100 mA drive current. These results underscore the potential of LBASO:Cr3+ for applications in plant lighting, night vision, and nondestructive analysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3941-2
The precise and directed assembly of multicomponent aggregates remains a central challenge in materials chemistry, particularly the integration of neutral clusters. This study introduces a 'cation-mediated co-crystallization' strategy to overcome electrostatic assembly barriers between neutral aluminum molecular rings and polyoxometalates (POMs). By controllably functionalizing the rings with cationic moieties, the approach bypasses traditional 'ion-pair' limitations, enabling incorporation of diverse neutral clusters. The strategy exhibits structural extensibility, with cationic sites adjustable on ring exteriors or interiors, and potential extension to various polyanionic systems. The resulting hybrid materials demonstrate outstanding solution processability. When incorporated as dielectric dopants in a polymer matrix, they achieve a synergistic '1+1>2' effect: aluminum rings contribute high capacitance density (~11.19) and low dielectric loss (~0.03), while POMs provide high breakdown strength (~740 MV m−1). This work establishes a paradigm for directed macroscopic functional assembly via molecular-level cluster interaction 'encoding'.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4039-1
Immunosuppressive metabolites are major drivers of tumor immune suppression. Among these, kynurenine (Kyn) is produced through the catalysis of tryptophan (Trp) 2,3-dioxygenase (TDO) in hepatocellular carcinoma. However, TDO inhibition alone is often insufficient because residual pathway flux sustains the accumulation of the downstream immunosuppressive metabolite quinolinic acid (QA). Here, we propose a strategy to disrupt residual kynurenine pathway activity to enhance metabolism-driven tumor immunotherapy. We develop acid-responsive metal-organic complex nanoparticles (APAP@TDOi-Zn, ATZn) that integrate the TDO inhibitor (TDOi) and Zn2+, while encapsulating acetaminophen (APAP) to inhibit 3-hydroxyanthranilate 3,4-dioxygenase (HAAO), thereby limiting QA production and simultaneously suppressing the residual immunosuppressive metabolite. QA suppression limits M2 macrophage polarization, whereas Kyn inhibition and Zn2+ supplementation promote T cell proliferation and cytotoxicity. Consequently, ATZn rewires Trp-Kyn metabolism and augments antitumor immunotherapy. This work enhances the efficacy of metabolic checkpoint blockade and provides a strategy to overcome metabolism-driven immune resistance.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60708-6
Mercury emissions from coal combustion are highly toxic, volatile, and bioaccumulative, posing long-term threats to ecosystems and human health. This review systematically examines the current status and control policies of mercury emissions from coal combustion in China, analyzing distribution characteristics and transformation mechanisms during combustion, with emphasis on collaborative removal in pollution control devices after ultra-low emission retrofitting. A progressive strategy of 'synergistic enhancement–deep purification–resource recycling' is proposed, comprising three tiers: optimizing operational parameters of existing control systems to enhance synergistic mercury removal; developing efficient adsorption and catalytic oxidation technologies for industrial application; and advancing integrated mercury removal and recovery technologies, such as magnetosphere-based sorbents and recovery processes, focusing on high-value utilization. The paper also outlines future research directions aligned with international compliance and domestic environmental tax policies, providing theoretical and technical support for China's commitments to near-zero emissions of coal combustion pollutants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4274-x
The escalating power density of electronic devices necessitates effective visible-light shielding in advanced packaging to ensure circuit security and long-term reliability. Photosensitive polyimides (PSPI) serve dual roles as photodefinable dielectrics and structural layers, but intrinsically black PSPI (B-PSPI) suffer from competitive ultraviolet (UV) absorption between chromophores and photosensitive moieties, limiting co-optimization of deep visible-light blocking and lithographic resolution. Here, we report a main-/side-chain spatial decoupling strategy to synthesize a novel B-PSPI. By polymerizing pyromellitic dianhydride with a main-chain coloring monomer (4,4'-diaminodiphenylamine) and a side-chain photosensitive monomer (1,4-dihydropyridine-functionalized diamine), the monomer stoichiometric ratio is precisely engineered. This design spatially isolates functional groups and enhances charge transfer, yielding exceptional visible-light shielding (CIE L* index of 21.39, cut-off wavelength ≈ 555 nm) with good lithographic sensitivity. UV exposure triggers in situ generation of coordination sites from photosensitive groups, anchoring active metal species for electroless copper plating. This enables direct additive fabrication of fine copper lines (40/80 μm line width/spacing) with robust Cu/B-PSPI interfacial adhesion of 16.6 MPa. This work provides a robust molecular design paradigm for B-PSPI, integrating superior optical shielding and surface metallization for high-density interconnect applications.