SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3709-4
Photoelectrocatalytic (PEC) detoxification of ofloxacin in hyposaline wastewater is hindered by weak built-in electric fields (IEF) and rapid charge recombination. Here, we report a crystal dipole engineering strategy using high-valence Mo-doped BiVO4 to enhance IEF and PEC activity. Mo incorporation breaks lattice symmetry, increasing the crystal dipole moment and amplifying IEF to 2.05 times that of pristine BiVO4. This promotes directional carrier migration, improving electron-hole separation efficiency. The optimized 4% Mo-BiVO4 photoanode achieves 96.5% ofloxacin degradation within 60 minutes and maintains 91.9% degradation efficiency in natural lake water containing saline and organic interferents, demonstrating exceptional anti-interference capability. This work provides a strategy for boosting photocatalytic performance through unit-cell dipole engineering, aiming to enhance sustainability in wastewater treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3841-6
Ni-rich layered oxide cathodes are pivotal candidates for next-generation lithium-ion batteries (LIBs) due to their high capacity and energy density. However, their susceptibility to structural deterioration and interfacial degradation during cycling causes substantial capacity fade, hindering commercialization. This work proposes a synergistic strategy of lattice doping and in situ surface coating to enhance structural integrity and interfacial stability of LiNi0.9Co0.05Mn0.05O2. La and Y dopants act as pillars to reinforce the layered structure, mitigating volume changes and expanding c-axis spacing to facilitate Li+ diffusion. Concurrently, La4NiLiO8 and LiYO2 coatings protect the cathode from H2O/CO2 corrosion and electrolyte attack, while their high lithium-ion conductivity promotes Li+ transport. The modified cathode delivers exceptional electrochemical metrics: high specific capacity of 207.3 mA h g−1, remarkable cycling stability with 97.6% retention after 100 cycles, superior rate capability of 152.1 mA h g−1 at 10.0 C, and enhanced thermal stability. This work establishes a paradigm for multi-dimensional stabilization of Ni-rich cathodes via synergistic bulk and interface engineering, providing insights for designing high-performance energy storage systems.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506081
Advanced oxidation processes (AOPs) are promising for degrading organic pollutants in water treatment. Heterogeneous catalytic ozonation (HCO) has gained attention due to its high oxidation efficiency, strong interference resistance, and low secondary pollution. In this study, a series of trimetallic-carbon composite ozone catalysts were prepared via an organic precursor calcination method using γ-Al2O3 as support. This method enhanced catalytic activity and mechanical strength while overcoming the limitations of carbon materials (low mechanical strength) and metal-based materials (poor mass transfer). The optimized catalyst, CA-FeCoCu, comprising Fe, Co, Cu, carbon, and alumina, exhibited excellent performance in phenol degradation and real industrial wastewater treatment. Characterization revealed that the synergistic effect of trimetals and the introduction of multiple carbon types increased specific surface area and hydroxyl radical (·OH) generation. In a pilot-scale fixed-bed reactor, the CA-FeCoCu/O3 system reduced COD from 120 mg·L−1 to below 40 mg·L−1, with an O3 consumption ratio (O/C) of less than 1, effectively lowering operational costs. This work provides a new strategy for developing efficient and stable heterogeneous O3 catalysts and offers a reference for the practical application of HCO in industrial wastewater treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010802
Ozone (O3) pollution is a prominent issue in the Guanzhong Plain, necessitating effective control of its precursors, particularly volatile organic compounds (VOCs). However, studies on VOC pollution characteristics at the county level are scarce. To investigate the summer VOC pollution characteristics and sources in high-altitude towns of the Guanzhong Plain, continuous monitoring of 53 typical VOC species was conducted at two sites in Changwu County, Xianyang City (elevation 1200 m). The spatiotemporal variations of ambient VOCs and their ozone formation potential (OFP) were analyzed, and source apportionment was performed using the Positive Matrix Factorization (PMF) model. Results showed that average total VOC (TVOCs) concentrations at the Changwu Government and Changwu Middle School sites were 60.04×10⁻⁹ and 83.28×10⁻⁹, respectively. Oxygenated VOCs (OVOCs) dominated, accounting for 55.14% and 62.91% of TVOCs, followed by alkenes, aromatic hydrocarbons, and halogenated hydrocarbons. Industrial sources contributed the most (43.2%) to VOC emissions in Changwu County, but site-specific differences were observed: the Government site was primarily influenced by solvent use (30.7%) and motor vehicles (19.1%), while the Middle School site was dominated by domestic sources (27.6%) and motor vehicles (20.0%). The average OFP values at the Government and Middle School sites were 258.84×10⁻⁹ and 378.04×10⁻⁹, respectively, with alkenes and OVOCs as the main contributors, originating from industrial emissions, solvent use, and biogenic sources. EKMA curves indicated that Changwu County was in a VOC-limited regime during the observation period, confirming the effectiveness of VOC control for ozone mitigation. These findings provide scientific guidance for local ozone management and offer a paradigm for precise ozone pollution control in county-level regions of the Guanzhong Plain.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022502
The design of stable and efficient O3 catalysts is critical for advancing heterogeneous catalytic ozonation (HCO) in industrial wastewater treatment. In this study, various iron-based bimetallic oxides were synthesized, and Fe-Co bimetallic oxide (FeCo-O) was identified as the optimal catalyst through degradation experiments and structural characterization. FeCo-O exhibits a single spinel structure with abundant metal valence states and synergistic effects between Fe and Co. Compared to conventional O3 oxidation, the FeCo-O/O3 system enhanced organic pollutant degradation by 2–3 times, demonstrating broad applicability under neutral or weakly acidic/alkaline conditions. Characterization revealed that FeCo-O promotes O3 activation via enhanced inter-metal electron transfer on the catalyst surface, increasing the generation of highly oxidative free radicals (·OH, ·O2−) and thereby improving pollutant degradation efficiency. In treating real industrial wastewater, the FeCo-O/O3 system achieved excellent COD removal, indicating its potential for both pre-treatment and advanced treatment applications. This study provides theoretical and practical guidance for designing efficient catalytic ozonation catalysts.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60645-7
Volatile organic compounds (VOCs) from diverse sources severely impact atmospheric environment and human health. Manganese (Mn)-based catalysts, with exceptional structural diversity and abundant redox versatility, are widely used in catalytic combustion of VOCs. This review summarizes the catalytic performance of various Mn-based catalysts, emphasizing preparation strategies for high-performance materials and systematically analyzing how active site construction influences VOC combustion. Catalytic oxidation mechanisms are expounded in detail. Key aspects include MnOx polymorphs, doping with alkali metals (e.g., K+), transition metal composites (Co, Cu), and noble metal loading (Pt, Pd, Au). Performance metrics such as T90 values, oxygen vacancy concentrations, and specific surface areas are discussed. The review provides insights into deactivation mechanisms and anti-poisoning strategies, offering practical guidance for VOC pollution remediation.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60648-2
The influence of mixing modes on the integrated process of co-pyrolysis of Naomaohu coal (NMH) and elm (ELM) with CO2 reforming of methane (CP-CRM) was investigated over Ni-based catalysts prepared by ball milling. Three mixing modes—NMH/ELM, ELM/NMH, and Blends—were examined and compared with co-pyrolysis under N2 (CP-N2). Results show that product distribution was significantly affected by mixing mode. The Blends mode achieved the highest tar yield, increasing by 35.29% compared with CP-N2. Light oil content in tar was higher, while pitch content was lower for Blends relative to layered modes. Phenols content in tar from Blends was 19.52% higher than CP-N2, and free radical concentration in tar was higher, attributed to enhanced heat and mass transfer between particles by mechanical mixing, promoting complete pyrolysis and efficient utilization of hydrogen-rich free radicals (·H, ·CHx) to suppress secondary cracking and polymerization. In contrast, NMH/ELM mode in CP-CRM improved phenols content by 33.27% over CP-N2. Free radical concentration in tar during CP-CRM was lower than in CP-N2, indicating timely stabilization of pyrolysis radicals by reforming-generated radicals. These findings provide guidance for regulating tar yield and composition in co-pyrolysis processes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4075-1
Titanium alloys, such as Ti-6Al-4V (TC4), are indispensable in aerospace, biomedical, and advanced manufacturing due to their high specific strength, corrosion resistance, and biocompatibility. However, their inherent strength-ductility trade-off and limited stiffness hinder next-generation lightweight structural applications. Traditional ceramic reinforcements (TiC, TiB2, SiC) improve strength but introduce brittleness and interfacial incompatibility, degrading plasticity and fatigue resistance. Graphene, with theoretical strength ~130 GPa and Young's modulus ~1 TPa, offers a promising two-dimensional reinforcement. This review systematically examines graphene-reinforced titanium matrix composites (TMCs), focusing on the intrinsic relationship between preparation, microstructure, and properties. Key preparation routes include powder metallurgy and additive manufacturing, with challenges in achieving uniform dispersion and controlling interfacial reactions. Recent studies demonstrate that surface modification and process optimization can form an ideal interface structure comprising a nano-TiC layer and residual graphene. Even at low graphene additions, synergistic strengthening mechanisms—load transfer, fine-grain strengthening, and Orowan dislocation bypass—significantly enhance strength, hardness, and wear resistance while preserving ductility. This review consolidates critical theoretical and experimental findings, offering guidance to overcome technological bottlenecks and promote engineering applications of graphene-reinforced TMCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4065-6
Industrial-scale hydrogen production from seawater is a paramount goal for a sustainable energy future, yet it is severely hampered by the rapid deactivation of electrocatalysts under harsh operating conditions. Here, we introduce a robust self-supporting aerogel catalyst designed to address the two intertwined challenges of activity and stability in high-current-density seawater electrolysis. Our strategy involves creating strong metal-support interactions by anchoring ultrasmall platinum nanoparticles onto a porous N-doped carbon aerogel (Pt@N/CFP). Theoretical calculations reveal that this unique Pt-N interface serves a dual critical function: it not only lowers the kinetic barrier for water dissociation but also creates an electronic shield that effectively prevents chloride ion poisoning of the Pt active sites. When implemented as the cathode in a practical anion-exchange membrane (AEM) electrolyzer, the Pt@N/CFP catalyst demonstrates exceptional performance, achieving a low cell voltage of 1.688 V at an industrial-grade current density of 1000 mA cm−2 and maintaining outstanding stability for over 300 h. This work provides guidance for creating exceptionally durable catalysts capable of withstanding extreme electrochemical environments.