SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4487-1
Direct seawater electrolysis offers a cost-effective route to clean hydrogen, but the competitive chlorine evolution reaction (CER) and electrode corrosion impede practical deployment. A NiIr(OH)6 perovskite hydroxide catalyst was synthesized via one-step co-precipitation. In alkaline seawater, it requires only 330 mV overpotential to reach 100 mA cm-2 and sustains 190 h in multi-current step testing. In situ Raman spectroscopy shows that Ir species promote the formation of active NiOOH phases, accelerating oxygen evolution reaction (OER) kinetics. Density functional theory calculations reveal that Ir doping modulates the electronic structure of Ni and Ir sites, strengthening OH adsorption (-2.09 eV) and suppressing Cl- adsorption (-1.38 eV), thereby enhancing OER selectivity. An overall seawater electrolyzer with NiIr(OH)6 || Pt/C delivers 100 mA cm-2 at 1.63 V and operates stably for over 100 h. This work provides a rational design strategy for high-efficiency, corrosion-resistant electrocatalysts for seawater electrolysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3616-8
Negative stiffness (NS) structures exploit multi-stable mechanisms to achieve energy absorption, yet their practical application is limited by material and manufacturing constraints that compromise load-bearing capacity, reusability, and energy absorption efficiency. This study addresses these limitations by employing continuous carbon fiber reinforced thermoplastic polymers (CCFRTP) and three-dimensional (3D) printing to fabricate NS structures with cosine beam cells. A wet twisting method for continuous carbon fiber (CCF) was developed to enhance mechanical properties and elucidate failure behaviors and interfacial adhesion mechanisms. The resulting CCF/PLA/PVDF composites exhibited significant improvements in mechanical properties compared to untreated counterparts, with failure analysis revealing characteristic fiber breakage due to enhanced interfacial adhesion, as opposed to fiber pull-out and irregular fracture in untreated samples. A one-stroke path planning model was used to investigate bistability principles and energy absorption mechanisms. Displacement-controlled loading/unloading experiments assessed energy absorption in both energy-locked and repetitive modes. A dual-unit assembly structure was fabricated to validate the feasibility of a negative stiffness honeycomb structure. Composite layup simulations via Abaqus confirmed the deformation process and energy absorption mechanisms. The findings demonstrate that CCFRTP-based NS structures offer considerable potential for large deformation energy absorption applications in aerospace and naval fields.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506041
Urban and rural multi-source organic waste faces bottlenecks including high compositional heterogeneity, single resource recovery pathways, and uneven product quality. In the Taihu Lake region, active tourism and catering, high greening, and dense water networks generate large volumes of diverse waste with high moisture content, exacerbating these issues. This study evaluated a coupled bio-drying and aerobic composting process at a demonstration center in Linhu Town, Suzhou, Jiangsu Province, employing a three-stage control strategy: gradient dewatering, high-temperature stabilization, and maturation enhancement. Continuous operation showed that kitchen waste moisture content decreased from 77.70% to 58.69% after 1 day of bio-drying, to 23.22% after 7 days of silo reactor composting, and to 17.70% after at least 20 days of maturation. The aerobic composting phase maintained temperatures above 55°C for over 5 days, reaching a maximum of 68.1°C, meeting the harmless treatment requirements of CJJ 52—2014. After 20 days of maturation, the organic fertilizer product had an electrical conductivity below 4.00 mS·cm−1, organic matter content of 51.22%, total nutrient content of 5.61%, and heavy metal concentrations below the limits of NY/T 525—2021. The results provide technical support for efficient treatment and resource utilization of urban and rural organic waste.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604011
Reverse osmosis (RO) membrane fouling remains a critical bottleneck in reclaimed water production, yet its spatial heterogeneity over extended operation is poorly understood. This study investigated fouling characteristics and microbial community dynamics on RO membranes after 3.5 years of operation in a full-scale microfiltration-reverse osmosis (MF-RO) system treating reclaimed water. Long-term monitoring showed stable effluent quality (turbidity <0.1 NTU, conductivity <400 μS/cm), but RO inlet pressure exhibited seasonal fluctuations of 15%–22% between summer and winter, attributed to water viscosity changes. Membrane autopsies revealed distinct fouling layers at the inlet (RO1) and outlet (RO2) ends. RO1 featured a dense bio-inorganic composite fouling layer with CaSO4 crystals and rod-shaped microbial aggregates (5–10 μm), dominated by Proteobacteria (77.11%), particularly Alphaproteobacteria (71.49%) and Xanthobacteraceae (35.29%), which secreted extracellular polymeric substances (EPS) to form biofilms. In contrast, RO2, exposed to higher salinity, showed reduced microbial abundance (Proteobacteria decreased to 64.79%) and a shift toward halotolerant taxa, including Microbacteriaceae (23.73%) and Actinobacteriota (24.76%), with EPS secretion increased by 42%. Alphaproteobacteria relative abundance dropped by 19.3%, while Gammaproteobacteria rose to 12.54%. These findings elucidate salinity-driven microbial succession and spatial heterogeneity of fouling, providing a basis for targeted antifouling strategies and 'zonal-graded' cleaning protocols in reclaimed water plants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3927-9
The mechanical properties of as-cast TiAl alloys are severely limited by their coarse as-cast microstructure. This study proposes a low-temperature pre-deformation heat treatment to refine the microstructure of an as-cast Ti-47Al-2Nb-2Cr alloy. The process involves pre-deformation below the eutectoid temperature followed by heat treatment in the α+γ phase field, yielding two distinct microstructures: duplex (DP) and nearly lamellar (NL). The average lamellar colony size was reduced to 5.3% and 20% of the as-cast size for DP and NL structures, respectively. Microstructural evolution analysis reveals that the decomposition of coarse lamellar colonies and the formation of fine grains are governed by γ recrystallization, γ→α phase transformation, and α recrystallization. Remnant colonies after deformation are completely eliminated by subsequent heat treatment, enhancing microstructural homogeneity and mechanical properties. The DP alloy exhibits an ultimate tensile strength (UTS) of 537 MPa and an elongation (EI) of 6.8% at 800°C, representing increases of 44.7% and 518.2% over the as-cast alloy, respectively. Analysis of crack propagation and deformation mechanisms indicates that grain refinement and lamellar structure refinement contribute to improved deformation ability. This work provides a viable pathway for optimizing as-cast TiAl alloys for high-temperature applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3781-8
The 2xxx (Al-Cu-Mg) alloy is widely used in transportation fields due to its excellent strength-to-weight ratio. However, conventional heat treatments such as peak aging (PA) often result in a pronounced strength-ductility trade-off and limited fatigue resistance. To address these limitations, this work presents a comprehensive study on the mechanical properties and fatigue behavior of Al-Cu-Mg alloy subjected to a cyclic plasticity treatment. The cyclic strengthened (CS) samples exhibit a well-balanced combination of strength and ductility due to the formation of nanoscale solute clusters. A systematic and quantitative analysis of the strengthening mechanisms is performed to evaluate the contributions of key microstructural features to the mechanical response. Moreover, the CS samples also demonstrate a significantly higher fatigue ratio and fatigue strength compared to the PA sample, despite exhibiting comparable tensile strength. These improvements are attributed to the absence of weak precipitate-free zones (PFZs) induced as a result of cyclic plasticity, which completely eliminates the pronounced strength differential between the grain interiors and the PFZs observed in the PA state. This microstructural uniformity effect effectively suppresses strain localization under cyclic loading, promotes a more homogeneous strain partitioning, and consequently delays fatigue crack initiation. These findings highlight cyclic plasticity treatment as a promising microstructure design strategy for simultaneously enhancing the mechanical and fatigue properties of high-strength Al alloys.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61099-2
The first molecular dynamics (MD) simulation dataset is reported for the interfacial shear behavior of carbon fiber/thermoplastic composites (CFRTPs), aimed at overcoming the critical interfacial problem that limits their high-end applications such as aerospace and new energy vehicles. The study features two key advances. First, we use the newly developed CHONSi-2024 reactive force field (ReaxFF), which provides high-precision parameters specifically for CFRTP interfacial systems. Second, the atomic models are constructed based on experimental characterization data and rigorously validated across multiple parameters, including shear modulus, yield behavior, stress-strain curves, and fracture morphology, ensuring quantitative agreement with experimental results. This dataset provides a complete record of the simulations, encompassing atomic trajectories, local structural changes, interfacial stress-strain responses, and system thermodynamic behaviors. These data offer direct atomic-scale insights into the interfacial strengthening mechanisms. The generated trajectories are compatible with mainstream software for visualization and analysis. Moreover, the dataset constitutes a high-quality resource for developing machine learning force fields, building structure-property relationships, and enabling the predictive modeling and high-throughput screening of composite interfaces. This dataset is anticipated to advance the fundamental understanding of composite interfaces and facilitate the rational design of high-performance CFRTPs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506084
Groundwater is a vital drinking and irrigation source in the loess regions of northwestern China. In Guyuan, a densely populated area in southern Ningxia, systematic assessments of groundwater pollution risks are lacking. This study collected 60 groundwater samples and employed the Nemerow index, heavy metal pollution index (HPI), and health risk assessment models to evaluate pollution levels and health risks of eight elements including Cr, As, and Hg. Results show that the groundwater is generally Class IV quality, with a mean TDS of 1350.9 mg·L−1. Average concentrations of As, Cr, and Mn are 4.39, 29.87, and 45.77 μg·L−1, respectively. The Nemerow index indicates moderate pollution. The mean HPI is 10.56, but a local sample (PS1-51-下) reaches 36.15, indicating severe pollution. Health risk assessment reveals that carcinogenic risks from Cr and As for adults and children are 8.037×10−6 a−1 and 3.863×10−6 a−1, respectively, below US EPA limits but above recommended levels by Swedish and Dutch agencies, with children at higher risk. Hydrogen and oxygen isotopes and principal component analysis suggest that groundwater is primarily recharged by atmospheric precipitation. Cr, Zn, and Mn mainly originate from regional copper ore belts, coal mining, and agricultural activities. This study fills a gap in multidimensional groundwater assessment in populated loess areas, identifies pollution characteristics distinct from typical loess regions, and provides a scientific basis for regional water resource risk management and sustainable development.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010306
Sulfur autotrophic denitrification (SAD) has attracted increasing attention due to its low cost, no need for external carbon sources, and low sludge production. This review systematically examines the reaction principles and key material elements of various electron donors for SAD, including elemental sulfur, sulfide, thiosulfate, and iron sulfide. It discusses recent research progress on different SAD processes and the influence of environmental factors. A comparative analysis between heterotrophic denitrification and SAD highlights SAD's advantages in reaction rate, secondary pollution, and cost-effectiveness, underscoring its promising application prospects. Notably, iron sulfide-based autotrophic denitrification maintains stable pH and produces fewer by-products (e.g., sulfate, nitrous oxide). When developed into an aggregate sulfur concrete system, it can purify nitrogen and phosphorus from secondary effluent standards to Class IV surface water standards within a hydraulic retention time of only 0.5–2 hours, addressing the contradiction between SAD reaction rate and engineering demands. This enables efficient simultaneous nitrogen and phosphorus removal, making it viable for groundwater remediation, advanced wastewater treatment, eutrophication control, and deep nitrogen removal. The national 'Dual Carbon Strategy' (carbon neutrality and peak) positions SAD as a promising method for wastewater treatment plants to meet increasingly stringent nitrogen and phosphorus discharge standards.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025083003
To obtain freshwater from saline water and seawater, a double-layer evaporator consisting of carbon spheres and corn stalks was fabricated (abbreviated as CC). Corn stalks served as the evaporator substrate, and a mixed hydrogel of carbon spheres and polyvinyl alcohol functioned as the photothermal conversion layer. The solar-driven interfacial evaporation and desalination performance of the CC evaporator was investigated. The glucose-derived carbon spheres exhibited a uniform morphology and achieved 95% light absorption across 200–2500 nm. Under 1 sun (1 kW·m−2) irradiation, the CC with 3 cm height (CC-3) reached an exceptional evaporation rate of 3.55 kg·m−2·h−1 with a remarkable energy efficiency of 97.53%. When different wind speeds (1.5, 2, and 2.5 m·s−1) were applied, the evaporation rates further increased to 7.17, 8.92, and 10.41 kg·m−2·h−1, respectively. The evaporation rate of CC-3 for 3.5% saline was 3.46 kg·m−2·h−1. A 5-day long-time experiment exhibited stable desalination and excellent salt tolerance. Under a wind speed of 2.5 m·s−1, the evaporation rate reached 9.56 kg·m−2·h−1. In an outdoor natural light within a closed system and 2.5 m·s−1 of wind speed, the maximum evaporation rate and cumulative evaporation amount for seawater were 9.59 kg·m−2·h−1 and 66.0 kg·m−2, with no salt crystallization observed on the CC surface. These results demonstrate the potential practical application of the CC evaporator in seawater desalination.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225222
The composite tridimensional rotational flow sieve tray (CTRST) integrates a packing zone and a swirl zone to enhance gas-liquid contact, yet its application range and structural optimization are hindered by unclear cross-zone flow distribution mechanisms. This study experimentally investigates gas-liquid cross-zone distribution and flow loss in both zones, introducing net cross-zone flow proportions for gas and liquid phases to quantify inter-zone flow. Under tested conditions, the net liquid cross-zone flow proportion ranged from -0.325 to -0.370, indicating net liquid flow from the swirl zone to the packing zone, while the net gas flow proportion ranged from 0.022 to 0.310, indicating net gas flow from the packing zone to the swirl zone. Analysis of loss flow ratios revealed that liquid spray density and gas kinetic energy factor had minor influence on net liquid loss flow proportion (always less than -0.037), suggesting low resistance to liquid exchange. Conversely, gas loss flow proportion varied significantly from -0.047 to -0.319, indicating substantial resistance to gas cross-zone interaction. This gas loss ratio initially increased then decreased with liquid spray density, peaking at 92.26 m3/(m2·h), and increased with gas kinetic energy factor. A predictive model for net cross-zone flow proportions was developed, correlating operational parameters with flow loss intensity, providing theoretical support for optimizing tray design and operation.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605018
To address the inadequacy of existing temporal emission allocation coefficients for oil storage, transportation, and sales sources in regions with distinct seasonal temperature variations, this study focused on a large oil depot in Northwest China. A method for establishing temperature-dependent hourly allocation coefficients for VOCs emissions was proposed, revealing a positive correlation between ambient temperature and emission coefficients. The coefficient peaked at 0.068 when temperatures exceeded 14 °C and dropped to a minimum of 0.007 below 8.5 °C. Annual VOCs emissions totaled 256.13 t, with summer contributing 108.89 t (42.51% of annual total) and winter only 12.54 t (4.90%), making summer emissions approximately 8.68 times higher than winter. Using CALPUFF dispersion modeling, dynamic source strength scenarios produced a maximum hourly concentration of 2242.7 μg/m³, a 55.12% increase over the constant source strength scenario (1445.8 μg/m³). The area of exceedance increased by 0.03 km², and the atmospheric environmental protection distance extended by 450 m, from 0 m to 450 m. These results demonstrate that conventional constant emission assumptions underestimate peak concentrations and protection distances, posing health risks to nearby residents. The study provides a scientific basis for localized emission regulation and improved environmental protection distance calculations.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3913-3
The depletion of fossil resources necessitates the development of sustainable polymers from renewable feedstocks. Eugenol, a biomass-derived compound, serves as an ideal platform molecule due to its reactive allyl group and rigid aromatic scaffold. This study introduces a chiral Pd/Wei-Phos catalytic system for the helix-selective living polymerization of achiral eugenol-based diazo acetate monomer, delivering helical polycarbenes in high yield with controlled molecular weight (Mn), narrow dispersity (Đ), and optical activity. Post-polymerization functionalization was achieved via thiol-ene click chemistry, enabling efficient incorporation of diverse functional groups (carboxyl, ester, ketone, and diol) with high conversion (>99%). Additionally, an innovative pentaerythritol tetra(3-mercaptopropionic acid) (PETMP) cross-linked eugenol-based polycarbene system has been constructed. By controlling the polymerization degree and cross-linking density of the polymer, the mechanical properties (tensile strength can reach 15 MPa) of the cross-linked materials can be easily adjusted. Moreover, the cross-linked films exhibit excellent chiral separation ability and can be used for the enantioseparation of enantiomers of various chiral alcohols, with enantiomeric excess (ee) up to 96%. This not only contributes an innovative strategy for designing high-performance functional materials, but also provides inspiring ideas for the development of biomass-derived high-performance materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508081
Traditional soil thermal remediation requires high temperatures (>300 °C), which can damage soil structure, increase energy consumption, and elevate carbon emissions. This study developed a Cu–CeOx/TiO2 trimetallic catalyst to enable low-temperature thermal remediation of naphthalene-contaminated soil. Using nano-TiO2 as a support, catalysts with varying Cu/Ce ratios were prepared via impregnation-calcination. Material characterization (XRD, TEM, XPS, etc.) revealed that Cu and Ce incorporation induced crystal defects in TiO2, enhancing lattice oxygen activity and electron mobility, thereby generating more oxygen vacancies and hydroxyl radicals. Performance evaluation using a TGA-GC-FTIR-MS platform showed that the catalyst with Cu:Ce = 1:1 achieved the best remediation efficiency, reducing the thermal remediation temperature from 250 °C to 211.5 °C and increasing the removal rate by an average of 19.49% compared to the non-catalyst group at the same temperature. The catalyst facilitated stepwise degradation of naphthalene into smaller organic molecules (alcohols, carboxylic acids, aldehydes) and ultimately into H2O and CO2. This work demonstrates that Cu–CeOx/TiO2 significantly lowers the energy demand of thermal remediation, offering a promising approach for low-carbon remediation of organic-contaminated soils.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607008
Waste tire pyrolysis has emerged as a leading treatment technology due to its broad applicability, high resource recovery efficiency, and low environmental pollution. This study employs thermogravimetric analysis to investigate the influence of heating rate on pyrolysis characteristics and systematically analyzes reaction kinetics across three scales: overall reaction, weight-loss stages, and Fraser-Suzuki deconvolution. The Fraser-Suzuki function, with its asymmetric peak-fitting capability, outperforms conventional methods in describing the complex continuous reaction, achieving superior fit accuracy (R²=0.998). Deconvolution resolves the pyrolysis into four pseudo-components: additives, natural rubber, synthetic rubber, and high-temperature residual reactants, with average activation energies of 118.21, 202.60, 231.98, and 251.97 kJ/mol, respectively. The study provides critical theoretical support for temperature-zone control and reactor design optimization in waste tire pyrolysis technologies.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511052
Microplastics in sewage sludge, owing to their diverse physicochemical properties, can differentially affect subsequent anaerobic digestion. This study focused on polyethylene terephthalate (PET) microplastics, systematically investigating the effects of particle (MP), fiber (MF), and film (MPF) morphologies at concentrations of 0–150 mg·g⁻¹ (based on total solids) on sludge digestion performance and microbial community structure. Results showed that MP inhibited total biogas production at all concentrations (inhibition rates 8.16%–9.58%), whereas MF and MPF exhibited low-concentration stimulation and high-concentration inhibition, with MPF exerting stronger inhibition than MF. All MP concentrations induced significant reactive oxygen species (ROS) accumulation (increases of 9.43%–34.52%), indicating the strongest oxidative stress. Low concentrations of PET generally enhanced cell membrane permeability, prompting microbes to secrete different extracellular polymeric substances (EPS) to resist stress. The morphology and concentration of microplastics regulated the relative abundances of key functional bacteria (e.g., proteolytic bacteria and organic acid-oxidizing bacteria) and low-abundance bacteria, ultimately leading to differences in digestion performance. This study provides a theoretical basis for efficient treatment of sludge containing microplastics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4015-5
Mechanochromic photonic crystals are promising for smart optical materials due to their tunable photonic stop band. Here, we report interface-engineered transparent and mechanochromic non-close-packed photonic crystals (NPCs) by incorporating polystyrene@vinyl-modified SiO2 (PS@V-SiO2) nanospheres (n_PS=1.59, n_V-SiO2=1.46) into a photocurable phenoxypolyethylene glycol acrylate (PEGPEA) matrix (n_PEGPEA=1.52). The nanospheres formed solvation-mediated liquid NPCs in the precursor. Ultraviolet (UV) curing promoted copolymerization between surface C=C bonds of nanospheres and the matrix, which reduced interfacial scattering and enabled highly transparent NPC films. Meanwhile, non-uniform polymer shrinkage led to variations in the ordering of nanospheres, especially in structures with a low volume fraction (φ ≤ 0.23). Under external strain (ε: 0–64%), the film exhibited a dynamic color response. Initially, stretching enhanced the ordering of the nanospheres and the reflection intensity of NPCs, thereby activating the structural color. Further deformation, however, introduced defects and reduced the reflectivity. A blue shift of ~213 nm was achieved in an NPC (φ = 0.23) fabricated by 170 nm of PS@V-SiO2 nanospheres, accompanied by a color gradient from red to blue. Comparisons across SiO2–poly(ethylene glycol) diacrylate (PEGDA, n_PEGDA=1.45), SiO2–PEGPEA, and PS@V-SiO2–PEGDA NPC systems highlighted the key role of interfacial scattering, which is affected by the synergistic effects of interfacial covalent polymerization, refractive index matching between the elastomer matrix and nanospheres, and the crosslinking density. This work demonstrates spectrally tunable mechanochromism via size control and patterned anti-counterfeiting labels, thereby providing insights for designing advanced anti-counterfeiting materials applicable in flexible electronics and displays.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3998-8
Constitutional isomerism in covalent organic frameworks (COFs) has emerged as a powerful strategy to tailor material properties for photocatalytic applications. Here, we report the design and synthesis of two isomeric multicomponent COFs (MC-COFs) via Schiff-base condensation followed by Povarov reaction, converting imine linkages into quinoline structures. These isomeric MC-COFs exhibit opposing C=N bond orientations and distinct phenyl group alignments within the COF pores, leading to different torsion angles in the COF layers. Structural analyses reveal that enhanced planarity promotes π-π stacking and electron delocalization, resulting in favorable band structures and reduced exciton binding energies. Consequently, the optimized COF achieves a superior hydrogen peroxide (H2O2) production rate of 3128 μmol g−1 h−1 under visible light irradiation. This work underscores the critical influence of structural isomerism on the photocatalytic efficiency of MC-COFs and provides insights for rational design of high-performance COF-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4045-x
The release of radioactive iodine from nuclear accidents and nuclear medicine poses significant environmental and health risks. Here, we report the design and synthesis of two cross-linked macrocycle-based porous organic polymers (P1 and P2) with different functionalities for efficient and rapid capture of radioactive iodine. P1 achieves complete iodine adsorption within 5 minutes, with an exceptional adsorption rate constant (k_obs) of 18.92 g g−1 min−1 (8.24 g g−1 min−1 for P2), representing a record-high iodine removal rate among state-of-the-art porous organic polymers. P1 demonstrates superior iodine adsorption efficacy in dynamic flow-through experiments, achieving a remarkable efficiency of 96.4% for radioactive 131I removal, greatly minimizing radiation contamination. Experimental and modelling techniques reveal that the superior iodine adsorption performance originates from electron-rich functional groups, hydrophobic surface, and porous structure of P1, thus exhibiting remarkable iodine capture capabilities through charge transfer, halogen bonding, and hydrophobic effects. The adsorbents show excellent stability and performance under complex and harsh conditions (pH 2–10) and can be easily regenerated, confirming their excellent reusability and potential for practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4073-2
Precise control of molecular orientation in nonfullerene acceptors is crucial yet challenging for achieving both high efficiency and long-term stability in organic solar cells (OSCs). Here, we report a molecular dimerization strategy to regulate orientation and charge-transport anisotropy in ambipolar M-series acceptors. Using the edge-on-oriented small-molecule acceptor MC16 as a model, dimerization into DMC16 effectively suppresses over-aggregation and molecular diffusion while inducing a predominant face-on packing orientation. This orientation transition reverses the transport anisotropy from lateral to vertical directions, enabling balanced ambipolar charge transport and efficient carrier extraction. Consequently, DMC16-based OSCs exhibit a markedly enhanced power conversion efficiency together with outstanding thermal stability, retaining 94% of the initial efficiency after 1800 h at 85 °C and 74% after an additional 1000 h at 120 °C. When introduced as a third component in PM6:M36 ternary blends, DMC16 further optimizes blend morphology and stability, delivering an efficiency of 19.04% and over 15% in 10.15 cm2 modules. These results demonstrate that dimerization-induced molecular orientation control provides an effective pathway to simultaneously enhance efficiency, stability, and scalability in OSCs.